-- MIB file created 23-Jun-2016 16:28:36, by -- SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com CISCO-ERR-DISABLE-MIB DEFINITIONS ::= BEGIN -- From file: "CISCO-ERR-DISABLE-MIB.my" -- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T" IMPORTS ifIndex FROM IF-MIB TruthValue FROM SNMPv2-TC-v1 TimeIntervalSec FROM CISCO-TC VlanIndexOrZero FROM CISCO-PRIVATE-VLAN-MIB ciscoMgmt FROM CISCO-SMI Gauge FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215; ciscoErrDisableMIB OBJECT IDENTIFIER ::= { ciscoMgmt 548 } -- MODULE-IDENTITY -- LastUpdated -- 201606020000Z -- OrgName -- Cisco Systems, Inc. -- ContactInfo -- Cisco Systems -- Customer Service -- -- Postal: 170 W Tasman Drive -- San Jose, CA 95134 -- USA -- -- Tel: +1 800 553-NETS -- -- E-mail: cs-lan-switch-snmp@cisco.com -- Descr -- This MIB module provides the ability for a Network -- Management Station (NMS) to configure and monitor the -- error-disable feature via SNMP. -- -- The error-disable feature allows other software -- features running in a system to operationally disable a -- system entity upon detecting abnormal conditions. -- -- Examples of such a system entity include interfaces, a -- vlan configured in the system, or a VLAN allowed on -- specific layer 2 multi-vlan interface. -- -- More specific examples: -- -- a) When BPDU guard is enabled on an interface -- it is expected that no BPDU packets are received by -- the interface. If a BPDU packet is received, then the -- BPDU guard will operationally disable the -- interface. -- -- b) Users can configure a particular threshold of -- broadcast packets received on an interface. If the -- number of packets received exceeds the threshold, then -- storm-control will disable the interface. -- -- c) When unidirectional Link Detection (UDLD) detects a -- unidirectional link on an interface, it can disable -- the interface. -- -- d) On a trunk or a multi-vlan layer 2 port, if -- port-security detects violation on a particular vlan, -- then it can operationally disable that vlan on that -- port. -- -- The definition of 'abnormal condition' is under the -- control of features that make use of the error-disable -- feature to disable system entities. -- -- The error-disable feature supports the following -- configuration: -- -- 1) Whether software features can in fact use the -- error-disable feature upon detecting abnormal -- conditions. -- NOTE: Some software features will ALWAYS use the -- error-disable feature to disable entities upon -- detection of error. -- -- 2) Whether the system can attempt to automatically -- recover after a system entity has been disabled (e.g., -- A system can attempt to bring up a physical interface -- which had been disabled earlier) -- -- 3) If error recovery is possible, then the time -- interval to wait before the system starts the recovery -- attempt. -- RevDate -- 201606020000Z -- RevDescr -- Added the following new enumerations in -- CErrDisableFeatureID: -- other(36), portReinitLimitReached(37), -- adminRxBBCreditPerfBufIncomp(38), ficonNotEnabled(39), -- adminModeIncomp(40), adminSpeedIncomp(41), ncompAdminRxBBCredit(42), -- adminRxBufSizeIncomp(43), eppFailure(44), osmEPortUp(45), -- osmNonEPortUp(46), udldUniDir(47), udldTxRxLoop(48), -- udldNeighbourMismatch(49), udldEmptyEcho(50), -- udldAggrasiveModeLinkFailed(51), excessivePortInterrupts(52), -- channelErrDisabled(53), hwProgFailed(54), -- internalHandshakeFailed(55), stpInconsistencyOnVpcPeerLink(56), -- stpPortStateFailure(57), ipConflict(58), -- multipleMSapIdsRcvd(59), oneHundredPdusWithoutAck(60), -- and ipQosCompatCheckFailure(61). -- RevDate -- 201304230000Z -- RevDescr -- Added ciscoErrDisableFeatureFlapGroup and -- a new enumeration flapControl(4) in -- cErrDisableFeatureConfigurable. -- RevDate -- 201010190000Z -- RevDescr -- Added a new enumeration in CErrDisableFeatureID: -- tranceiverIncomp(35). -- RevDate -- 200903230000Z -- RevDescr -- Added the following new enumerations in -- CErrDisableFeatureID: -- sfpConfigMismatch(24), communityLimit(25), invalidPolicy(26), -- lsGroup(27), ekey(28), portModeFailure(29), -- pppoeIaRateLimit(30), oamRemoteCriticalEvent(31), -- oamRemoteDyingGasp(32), oamRemoteLinkFault(33), -- and mvrp(34). -- -- Added the new enumeration detectShutdownVlan(3) -- to cErrDisableFeatureConfigurable. -- -- Added ciscoErrDisableShutdownVlanGroup. -- RevDate -- 200804070000Z -- RevDescr -- Added the following new enumerations in -- CErrDisableFeatureID: -- packetBuffer(18), macLimit(19), linkMonitorFailure(20), -- oamRemoteFailure(21), dot1adIncompEtype(22), and -- dot1adIncompTunnel(23). -- -- cErrDisableInterfaceEvent notification is deprecated -- and replaced by a new notification -- cErrDisableInterfaceEventRev1. -- -- Modified the description of cErrDisableNotifEnable -- to add control for cErrDisableInterfaceEventRev1 -- notification. -- RevDate -- 200605310000Z -- RevDescr -- Initial version of this MIB module. ciscoErrDisableMIBNotifs OBJECT IDENTIFIER ::= { ciscoErrDisableMIB 0 } ciscoErrDisableMIBObjects OBJECT IDENTIFIER ::= { ciscoErrDisableMIB 1 } ciscoErrDisableMIBConform OBJECT IDENTIFIER ::= { ciscoErrDisableMIB 2 } cErrDisableGlobalObjects OBJECT IDENTIFIER ::= { ciscoErrDisableMIBObjects 1 } cErrDisableFeatureObjects OBJECT IDENTIFIER ::= { ciscoErrDisableMIBObjects 2 } cErrDisableIfObjects OBJECT IDENTIFIER ::= { ciscoErrDisableMIBObjects 3 } cErrDisableNotificationsPrefix OBJECT IDENTIFIER ::= { ciscoErrDisableMIBNotifs 1 } ciscoErrDisableMIBCompliances OBJECT IDENTIFIER ::= { ciscoErrDisableMIBConform 1 } ciscoErrDisableMIBGroups OBJECT IDENTIFIER ::= { ciscoErrDisableMIBConform 2 } CErrDisableFeatureID ::= INTEGER { udld(1), bpduGuard(2), channelMisconfig(3), pagpFlap(4), dtpFlap(5), linkFlap(6), l2ptGuard(7), dot1xSecurityViolation(8), portSecurityViolation(9), gbicInvalid(10), dhcpRateLimit(11), unicastFlood(12), vmps(13), stormControl(14), inlinePower(15), arpInspection(16), portLoopback(17), packetBuffer(18), macLimit(19), linkMonitorFailure(20), oamRemoteFailure(21), dot1adIncompEtype(22), dot1adIncompTunnel(23), sfpConfigMismatch(24), communityLimit(25), invalidPolicy(26), lsGroup(27), ekey(28), portModeFailure(29), pppoeIaRateLimit(30), oamRemoteCriticalEvent(31), oamRemoteDyingGasp(32), oamRemoteLinkFault(33), mvrp(34), tranceiverIncomp(35), other(36), portReinitLimitReached(37), adminRxBBCreditPerfBufIncomp(38), ficonNotEnabled(39), adminModeIncomp(40), adminSpeedIncomp(41), adminRxBBCreditIncomp(42), adminRxBufSizeIncomp(43), eppFailure(44), osmEPortUp(45), osmNonEPortUp(46), udldUniDir(47), udldTxRxLoop(48), udldNeighbourMismatch(49), udldEmptyEcho(50), udldAggrasiveModeLinkFailed(51), excessivePortInterrupts(52), channelErrDisabled(53), hwProgFailed(54), internalHandshakeFailed(55), stpInconsistencyOnVpcPeerLink(56), stpPortStateFailure(57), ipConflict(58), multipleMSapIdsRcvd(59), oneHundredPdusWithoutAck(60), ipQosCompatCheckFailure(61) } -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- An integer-value assigned to various features/events -- that can error disable a system entity -- -- udld: Unidirectional Link Detection -- -- bpduGuard: Spanning Tree BPDU Guard feature that prevents -- processing BPDU packets on an access interface -- -- channelMisconfig: General Link Aggregation mis-configuration -- -- pagpFlap: Cisco's PAGP Link Aggregation protocol errors -- -- dtpFlap: Dynamic Trunking Protocol errors -- -- linkFlap: Link State flapping -- -- l2ptGuard: L2 Protocol Tunnel errors -- -- dot1xSecurityViolation: 802.1x authentication violations -- -- portSecurity: Port Security violations -- -- gbicInvalid: Invalid GBIC errors (examples include -- unsupported GBIC being inserted) -- -- dhcpRateLimit: DHCP snooping rate limit violation -- -- unicastFlood: Unicast Flooding threshold violations -- -- vmps: VLAN Membership Policy Server feature related errors -- -- stormControl: storm control (broadcast/multicast/unicast) -- threshold violations -- -- inlinePower: Errors in inline power -- -- arpInspection: Errors detected by Dynamic Arp Inspection -- (DAI) feature -- -- portLoopback: Interface Loopback Error -- -- packetBuffer: Packet Buffer Error -- -- macLimit: Errors detected by Mac Address Limit feature -- -- linkMonitorFailure: Link Monitoring failure -- -- oamRemoteFailure: Remote Failure detected by Ethernet OAM -- (Operations, Administration, and Maintenance) feature -- -- dot1adIncompEtype: 802.1ad Ether-type Incompatible errors -- -- dot1adIncompTunnel: 802.1ad Pdu Tunnel Incompatible errors -- -- sfpConfigMismatch: Mismatch on SFP configuration -- -- communityLimit: Vlan Community Limit violations -- -- invalidPolicy: QoS Policy violation -- -- lsGroup: Errors detected by Link State Group Tracking feature -- -- ekey: Errors detected by Error Key Mechanism -- -- portModeFailure: Port mode change failure -- -- pppoeIaRateLimit: Errors detected by PPPoE Intermediate Agent -- Rate Limit feature -- -- oamRemoteCriticalEvent: Ethernet OAM Remote Critical Event -- Failure -- -- oamRemoteDyingGasp: Ethernet OAM Remote Dying Gasp Failure -- -- oamRemoteLinkFault: Ethernet OAM Remote Link Fault Failure -- -- mvrp: Errors detected by Multiple VLAN Registration Protocol -- -- tranceiverIncomp: Tranceiver incompatible errors -- -- other: Any other feature not covered by enumerations listed here -- -- portReinitLimitReached: Port reinitialization limit reached -- -- adminRxBBCreditPerfBufIncomp: Incompatible admin port rxbbcredit performance buffers -- -- ficonNotEnabled: Ficon not enabled -- -- adminModeIncomp: Incompatible port admin mode -- -- adminSpeedIncomp: Incompatible port admin speed -- -- adminRxBBCreditIncomp: Incompatible admin port rxbbcredit -- -- adminRxBufSizeIncomp: Incompatible admin port rxbufsize -- -- eppFailure: EPP Failure -- -- osmEPortUp: First interface in this group is E -- -- osmNonEPortUp: Other interfaces in this group are not shut -- -- udldUniDir: Unidirectional UDLD detected -- -- udldTxRxLoop: UDLD Tx-Rx loop -- -- udldNeighbourMismatch: UDLD neighbor mismatch -- -- udldEmptyEcho: UDLD empty echo -- -- udldAggrasiveModeLinkFailed: UDLD detected link failure in aggressive mode -- -- excessivePortInterrupts: Error disabled due to excessive port interrupts -- -- channelErrDisabled: Channel error-disabled -- -- hwProgFailed: hardware programming failed -- -- internalHandshakeFailed: Internal handshake failure -- -- stpInconsistencyOnVpcPeerLink: STP inconsistency on VPC peer-link -- -- stpPortStateFailure: STP has set port state to failure -- -- ipConflict: Error disabled due to IP address conflict -- -- multipleMSapIdsRcvd: DCX Multiple MSAP IDs recieved for the port -- -- oneHundredPdusWithoutAck: DCX Recieved 100 PDUs without ACK -- -- ipQosCompatCheckFailure: IP Qos DCBXP compat check failed cErrDisableRecoveryInterval OBJECT-TYPE SYNTAX TimeIntervalSec -- Rsyntax Gauge ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the error-disable recovery time interval. When a system entity is operationally disabled upon detecting abnormal condition by a particular feature, the system waits for a period equal to this time interval, and then re-enable the entity if automatic recovery is enabled for the feature." ::= { cErrDisableGlobalObjects 1 } cErrDisableNotifEnable OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether cErrDisableInterfaceEvent and cErrDisableInterfaceEventRev1 notifications should be generated when a system entity is error-disabled." ::= { cErrDisableGlobalObjects 2 } cErrDisableNotifRate OBJECT-TYPE SYNTAX Gauge -- Units -- Notification/Minute ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object specifies the maximum number of error-disable notifications the device will generate per minute. A value of '0' specifies no limit and the device will generate a notification for each error-disable event." ::= { cErrDisableGlobalObjects 3 } cErrDisableFeatureTable OBJECT-TYPE SYNTAX SEQUENCE OF CErrDisableFeatureEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains the error-disable related info for each feature employing the error-disable feature." ::= { cErrDisableFeatureObjects 1 } cErrDisableFeatureEntry OBJECT-TYPE SYNTAX CErrDisableFeatureEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry is created for each feature that employs the error-disable feature." INDEX { cErrDisableFeatureIndex } ::= { cErrDisableFeatureTable 1 } CErrDisableFeatureEntry ::= SEQUENCE { cErrDisableFeatureIndex CErrDisableFeatureID, cErrDisableFeatureConfigurable OCTET STRING, cErrDisableFeatureDetectEnable TruthValue, cErrDisableFeatureRecoveryEnable TruthValue, cErrDisableFeatureRecoveryInterval TimeIntervalSec, cErrDisableFeatureDetectShutdownVlan TruthValue, cErrDisableFeatureMaxFlapCount Gauge, cErrDisableFeatureFlapTimePeriod Gauge } cErrDisableFeatureIndex OBJECT-TYPE SYNTAX CErrDisableFeatureID -- Rsyntax INTEGER { -- udld(1), -- bpduGuard(2), -- channelMisconfig(3), -- pagpFlap(4), -- dtpFlap(5), -- linkFlap(6), -- l2ptGuard(7), -- dot1xSecurityViolation(8), -- portSecurityViolation(9), -- gbicInvalid(10), -- dhcpRateLimit(11), -- unicastFlood(12), -- vmps(13), -- stormControl(14), -- inlinePower(15), -- arpInspection(16), -- portLoopback(17), -- packetBuffer(18), -- macLimit(19), -- linkMonitorFailure(20), -- oamRemoteFailure(21), -- dot1adIncompEtype(22), -- dot1adIncompTunnel(23), -- sfpConfigMismatch(24), -- communityLimit(25), -- invalidPolicy(26), -- lsGroup(27), -- ekey(28), -- portModeFailure(29), -- pppoeIaRateLimit(30), -- oamRemoteCriticalEvent(31), -- oamRemoteDyingGasp(32), -- oamRemoteLinkFault(33), -- mvrp(34), -- tranceiverIncomp(35), -- other(36), -- portReinitLimitReached(37), -- adminRxBBCreditPerfBufIncomp(38), -- ficonNotEnabled(39), -- adminModeIncomp(40), -- adminSpeedIncomp(41), -- adminRxBBCreditIncomp(42), -- adminRxBufSizeIncomp(43), -- eppFailure(44), -- osmEPortUp(45), -- osmNonEPortUp(46), -- udldUniDir(47), -- udldTxRxLoop(48), -- udldNeighbourMismatch(49), -- udldEmptyEcho(50), -- udldAggrasiveModeLinkFailed(51), -- excessivePortInterrupts(52), -- channelErrDisabled(53), -- hwProgFailed(54), -- internalHandshakeFailed(55), -- stpInconsistencyOnVpcPeerLink(56), -- stpPortStateFailure(57), -- ipConflict(58), -- multipleMSapIdsRcvd(59), -- oneHundredPdusWithoutAck(60), -- ipQosCompatCheckFailure(61) -- } ACCESS not-accessible STATUS mandatory DESCRIPTION "This object uniquely identifies a feature that makes use of the error-disable feature." ::= { cErrDisableFeatureEntry 1 } cErrDisableFeatureConfigurable OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..2)) -- BITS are: -- detectionEnable(0) -- recoveryEnable(1) -- recoveryInterval(2) -- detectShutdownVlan(3) -- flapControl(4) ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates whether the error-disable related configuration is configurable for this feature. If a bit is set to 1, then the corresponding error-disable configuration can be configured. 'detectionEnable' - indicates the error-disable detection can be enabled/disabled for this feature via cErrDisableFeatureDetectEnable. 'recoveryEnable' - indicates the error-disable recovery can be enabled/disabled for this feature via cErrDisableFeatureRecoveryEnable. 'recoveryInterval' - indicates the error-disable recovery Interval can be configured via cErrDisableFeatureRecoveryInterval. 'detectShutdownVlan' - indicates the error-disable detection shutdown vlan mode can be configured for this feature via cErrDisableFeatureDetectShutdownVlan. 'flapControl' - indicates the error-disable flap control can be configured via cErrDisableFeatureMaxFlapCount and cErrDisableFeatureFlapTimePeriod." ::= { cErrDisableFeatureEntry 2 } cErrDisableFeatureDetectEnable OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the error-disable detection is enabled for the feature. Note: This object is read-write only for those features that are configurable, meaning: cErrDisableFeatureConfigurable. has the first bit set to 1." ::= { cErrDisableFeatureEntry 3 } cErrDisableFeatureRecoveryEnable OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the system can automatically recover a system entity that has been disabled by the feature." ::= { cErrDisableFeatureEntry 4 } cErrDisableFeatureRecoveryInterval OBJECT-TYPE SYNTAX TimeIntervalSec -- Rsyntax Gauge ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the error-recovery time interval that will be used by the system for any system entity that is error-disabled by this particular feature. If the value of this object is '0', then the device will use the value specified by the global configuration object cErrDisableRecoveryInterval." ::= { cErrDisableFeatureEntry 5 } cErrDisableFeatureDetectShutdownVlan OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether shutting down the violating VLAN on an interface is enabled or not. The value of 'true' indicates that shutting down the violating VLAN on an interface is enabled. The value of 'false' indicates that shutting down the violating VLAN on an interface is disabled." ::= { cErrDisableFeatureEntry 6 } cErrDisableFeatureMaxFlapCount OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the maximum number of flaps that are allowed to occur before setting to error disable state. A read-only value of zero indicates that no flap control is present." ::= { cErrDisableFeatureEntry 7 } cErrDisableFeatureFlapTimePeriod OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the period of time counting the number of flaps that are allowed before setting to error disable state. A read-only value of zero indicates that no flap control is present." ::= { cErrDisableFeatureEntry 8 } cErrDisableIfStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF CErrDisableIfStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table provides interface (port) specific error-disable status information. Each conceptual row provides status information about a {interface, vlan} disabled by a feature. On a trunk or multi-vlan access interface, a given vlan on the interface can be error-disabled. In this case, the row is indexed by the ifIndex for the interface and the vlan index corresponding to the vlan in question. If the interface is carrying only 1 vlan or the entire trunk interface is error-disabled (due to link flaps, for example) then the vlan index portion of the row index is 0." ::= { cErrDisableIfObjects 1 } cErrDisableIfStatusEntry OBJECT-TYPE SYNTAX CErrDisableIfStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A collection of objects that specify the status of an error-disabled Interface or {interface, vlan}." INDEX { ifIndex, cErrDisableIfStatusVlanIndex } ::= { cErrDisableIfStatusTable 1 } CErrDisableIfStatusEntry ::= SEQUENCE { cErrDisableIfStatusVlanIndex VlanIndexOrZero, cErrDisableIfStatusCause CErrDisableFeatureID, cErrDisableIfStatusTimeToRecover TimeIntervalSec } cErrDisableIfStatusVlanIndex OBJECT-TYPE SYNTAX VlanIndexOrZero -- Rsyntax INTEGER(0..4095) ACCESS not-accessible STATUS mandatory DESCRIPTION "This object specifies the vlan of the given interface that has been error-disabled. If the physical interface is error-disabled then the value of this object is 0." ::= { cErrDisableIfStatusEntry 1 } cErrDisableIfStatusCause OBJECT-TYPE SYNTAX CErrDisableFeatureID -- Rsyntax INTEGER { -- udld(1), -- bpduGuard(2), -- channelMisconfig(3), -- pagpFlap(4), -- dtpFlap(5), -- linkFlap(6), -- l2ptGuard(7), -- dot1xSecurityViolation(8), -- portSecurityViolation(9), -- gbicInvalid(10), -- dhcpRateLimit(11), -- unicastFlood(12), -- vmps(13), -- stormControl(14), -- inlinePower(15), -- arpInspection(16), -- portLoopback(17), -- packetBuffer(18), -- macLimit(19), -- linkMonitorFailure(20), -- oamRemoteFailure(21), -- dot1adIncompEtype(22), -- dot1adIncompTunnel(23), -- sfpConfigMismatch(24), -- communityLimit(25), -- invalidPolicy(26), -- lsGroup(27), -- ekey(28), -- portModeFailure(29), -- pppoeIaRateLimit(30), -- oamRemoteCriticalEvent(31), -- oamRemoteDyingGasp(32), -- oamRemoteLinkFault(33), -- mvrp(34), -- tranceiverIncomp(35), -- other(36), -- portReinitLimitReached(37), -- adminRxBBCreditPerfBufIncomp(38), -- ficonNotEnabled(39), -- adminModeIncomp(40), -- adminSpeedIncomp(41), -- adminRxBBCreditIncomp(42), -- adminRxBufSizeIncomp(43), -- eppFailure(44), -- osmEPortUp(45), -- osmNonEPortUp(46), -- udldUniDir(47), -- udldTxRxLoop(48), -- udldNeighbourMismatch(49), -- udldEmptyEcho(50), -- udldAggrasiveModeLinkFailed(51), -- excessivePortInterrupts(52), -- channelErrDisabled(53), -- hwProgFailed(54), -- internalHandshakeFailed(55), -- stpInconsistencyOnVpcPeerLink(56), -- stpPortStateFailure(57), -- ipConflict(58), -- multipleMSapIdsRcvd(59), -- oneHundredPdusWithoutAck(60), -- ipQosCompatCheckFailure(61) -- } ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies the feature/event that caused the {interface, vlan} (or the entire interface) to be error-disabled." ::= { cErrDisableIfStatusEntry 2 } cErrDisableIfStatusTimeToRecover OBJECT-TYPE SYNTAX TimeIntervalSec -- Rsyntax Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Time left before the system attempts an automatic recovery of the interface or the vlan of the given interface. If no recovery is scheduled, then the value of this object is '0'." ::= { cErrDisableIfStatusEntry 3 } cErrDisableInterfaceEvent TRAP-TYPE --?? Non-reverse mappable trap ENTERPRISE cErrDisableNotificationsPrefix VARIABLES { cErrDisableIfStatusCause } -- Status -- deprecated DESCRIPTION "The cErrDisableInterfaceEvent is generated when an interface or {interface, vlan} is error-disabled by the feature specified in cErrDisableIfStatusCause. cErrDisableInterfaceEvent is deprecated and replaced by cErrDisableInterfaceEventRev1." ::= 1 cErrDisableInterfaceEventRev1 TRAP-TYPE -- Reverse mappable trap ENTERPRISE ciscoErrDisableMIB VARIABLES { cErrDisableIfStatusCause } -- Status -- mandatory DESCRIPTION "The cErrDisableInterfaceEventRev1 is generated when an interface or {interface, vlan} is error-disabled by the feature specified in cErrDisableIfStatusCause. cErrDisableInterfaceEventRev1 deprecates cErrDisableInterfaceEvent to make it RFC 2578 compliant. According to section 8.5 of RFC 2578, the next to last sub-identifier in the name of any newly-defined notification must have the value zero." ::= 2 ciscoErrDisableGlobalCfgGroup OBJECT IDENTIFIER ::= { ciscoErrDisableMIBGroups 1 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects to configure error-disable -- functionality. -- objects -- cErrDisableRecoveryInterval ciscoErrDisableFeatureCfgGroup OBJECT IDENTIFIER ::= { ciscoErrDisableMIBGroups 2 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects to manage the configuration of -- the error-disable feature. -- objects -- cErrDisableFeatureConfigurable, -- cErrDisableFeatureDetectEnable, -- cErrDisableFeatureRecoveryEnable, -- cErrDisableFeatureRecoveryInterval ciscoErrDisableIfStatusGroup OBJECT IDENTIFIER ::= { ciscoErrDisableMIBGroups 3 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of error-disable interface status objects. -- objects -- cErrDisableIfStatusCause, cErrDisableIfStatusTimeToRecover ciscoErrDisableNotifCfgGroup OBJECT IDENTIFIER ::= { ciscoErrDisableMIBGroups 4 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects to configure error-disable -- notifications. -- objects -- cErrDisableNotifEnable, cErrDisableNotifRate ciscoErrDisableShutdownVlanGroup OBJECT IDENTIFIER ::= { ciscoErrDisableMIBGroups 7 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects to manage the configuration of -- error-disable detection shutdown vlan mode. -- objects -- cErrDisableFeatureDetectShutdownVlan ciscoErrDisableFeatureFlapGroup OBJECT IDENTIFIER ::= { ciscoErrDisableMIBGroups 8 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects to manage the configuration of -- the error-disable flap control. -- objects -- cErrDisableFeatureMaxFlapCount, -- cErrDisableFeatureFlapTimePeriod ciscoErrDisableNotifGroup OBJECT IDENTIFIER ::= { ciscoErrDisableMIBGroups 5 } -- NOTIFICATION-GROUP -- Status -- deprecated -- Descr -- A collection of error-disable notification objects. -- notifications -- cErrDisableInterfaceEvent ciscoErrDisableNotifGroupRev1 OBJECT IDENTIFIER ::= { ciscoErrDisableMIBGroups 6 } -- NOTIFICATION-GROUP -- Status -- mandatory -- Descr -- A collection of error-disable notification objects. -- notifications -- cErrDisableInterfaceEventRev1 ciscoErrDisableMIBCompliance OBJECT IDENTIFIER ::= { ciscoErrDisableMIBCompliances 1 } -- MODULE-COMPLIANCE -- Status -- deprecated -- Descr -- The compliance statement for the cisco errdisable MIB. -- Module -- >>current<< -- MandGroup -- ciscoErrDisableGlobalCfgGroup -- MandGroup -- ciscoErrDisableFeatureCfgGroup -- MandGroup -- ciscoErrDisableIfStatusGroup -- OptGroup -- ciscoErrDisableNotifCfgGroup -- OptGroup -- ciscoErrDisableNotifGroup ciscoErrDisableMIBComplianceRev1 OBJECT IDENTIFIER ::= { ciscoErrDisableMIBCompliances 2 } -- MODULE-COMPLIANCE -- Status -- deprecated -- Descr -- The compliance statement for the cisco errdisable MIB. -- Module -- >>current<< -- MandGroup -- ciscoErrDisableGlobalCfgGroup -- MandGroup -- ciscoErrDisableFeatureCfgGroup -- MandGroup -- ciscoErrDisableIfStatusGroup -- OptGroup -- ciscoErrDisableNotifCfgGroup -- OptGroup -- ciscoErrDisableNotifGroupRev1 -- OptGroup -- ciscoErrDisableShutdownVlanGroup -- ObjVar -- cErrDisableRecoveryInterval -- ObjVar -- cErrDisableNotifEnable -- ObjVar -- cErrDisableNotifRate -- ObjVar -- cErrDisableFeatureDetectEnable -- ObjVar -- cErrDisableFeatureRecoveryEnable -- ObjVar -- cErrDisableFeatureRecoveryInterval -- ObjVar -- cErrDisableFeatureDetectShutdownVlan ciscoErrDisableMIBComplianceRev2 OBJECT IDENTIFIER ::= { ciscoErrDisableMIBCompliances 3 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- The compliance statement for the cisco errdisable MIB. -- Module -- >>current<< -- MandGroup -- ciscoErrDisableGlobalCfgGroup -- MandGroup -- ciscoErrDisableFeatureCfgGroup -- MandGroup -- ciscoErrDisableIfStatusGroup -- OptGroup -- ciscoErrDisableNotifCfgGroup -- OptGroup -- ciscoErrDisableNotifGroupRev1 -- OptGroup -- ciscoErrDisableShutdownVlanGroup -- OptGroup -- ciscoErrDisableFeatureFlapGroup -- ObjVar -- cErrDisableRecoveryInterval -- ObjVar -- cErrDisableNotifEnable -- ObjVar -- cErrDisableNotifRate -- ObjVar -- cErrDisableFeatureDetectEnable -- ObjVar -- cErrDisableFeatureRecoveryEnable -- ObjVar -- cErrDisableFeatureRecoveryInterval -- ObjVar -- cErrDisableFeatureDetectShutdownVlan -- ObjVar -- cErrDisableFeatureMaxFlapCount -- ObjVar -- cErrDisableFeatureFlapTimePeriod END