-- MIB file created 29-Jan-2003 14:45:07, by -- SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com CISCO-FABRIC-C12K-MIB DEFINITIONS ::= BEGIN -- From file: "CISCO-FABRIC-C12K-MIB.my" -- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T" IMPORTS TruthValue FROM SNMPv2-TC-v1 SnmpAdminString FROM SNMP-FRAMEWORK-MIB PhysicalIndex, entPhysicalIndex, entPhysicalName FROM ENTITY-MIB EntPhysicalIndexOrZero FROM CISCO-TC ciscoMgmt FROM CISCO-SMI Counter, Gauge FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215; ciscoFabricC12kMIB OBJECT IDENTIFIER ::= { ciscoMgmt 281 } -- MODULE-IDENTITY -- LastUpdated -- 200209200000Z -- OrgName -- Cisco Systems, Inc. -- ContactInfo -- Cisco Systems -- Customer Service -- -- Postal: 170 W. Tasman Drive -- San Jose, CA 95134 -- USA -- -- Tel: +1 800 553-NETS -- -- E-mail: gsr-netman@cisco.com -- Descr -- Cisco Fabric MIB module for c12000 series of routers. -- This MIB module is used for managing/tracking the c12000 -- fabric entities and fabric related configuration, status -- and statistics information. -- -- C12000 fabric architecture is based on NxN non-blocking -- crossbar switch fabric, where N stands for the maximum -- number of LCs that can be supported in the chassis (this -- includes the RP). The connections through the switch -- fabric is controlled by a scheduler (CSC), the CSC -- accepts transmission requests from line cards, issues -- grants to access the fabric, and provides a reference -- clock to all the cards in the system to synchronize data -- transfer across the crossbar. -- -- Some of the error status objects in the MIB are read-clear, -- that is the value of the object is cleared on a query of the -- object. -- -- Details about the various fabric related attributes -- specified in the MIB could be found at following link, -- http://www.cisco.com/warp/public/108/hwts_12000_22281.html -- -- Acronyms and terms used in the MIB module: -- GSR - Gigabit Switch Router. -- RP - Route Processor. -- LC - Line Card. -- SFC - Switch Fabric Card. -- CRC - Cyclic Redundancy Check. -- CSC - Clock Scheduler Card. -- CiscoCell - The unit of data that is exchanged -- between line cards through the switch -- fabric. -- FIA - Fabric Interface Asic, this Asic -- resides on the line card and is -- used to interface line card and -- switch fabric. -- ToFabFIA - Represents the ToFabric FIA, FIA -- which transmits data from the -- line card to the fabric. -- FrFabFIA - Represents the From Fabric FIA, FIA -- which receives data from the fabric. -- SCA - Scheduler Control Asic, this Asic -- resides on each CSC and is used to -- arbitrate among the line card -- requests to transmit CiscoCells -- through the switch fabric. -- Xbar - Crossbar Switch Asic, this Asic -- resides on each fabric card and provides -- the functionality of a crossbar -- switch. -- SLI - Serial Link interface block, this -- block resides on the FIA on the line -- cards and the Xbar and SCA on the -- switch fabric. The functionality of SLI -- is to interface the linecards and fabric -- cards. -- BMA - Buffer Manager Asic, this Asic is -- located on a Pre OC-192 linecard. -- It provides the packet buffering -- and buffer queue management. -- MCC - Memory Communication Controller Asic, -- this Asic is located on a OC-192 -- linecard and is an enhanced packet buffer -- Asic. MCC captures the data and control -- path information for packets destined -- to all line cards in the system. On the -- receive side MCC interfaces with the -- Rx Asic where the packets are looked up -- and sent to the MCC for buffering. On the -- transmit side it interfaces with the -- ToFabFIA where packets arrived from MCC -- will be segmented into CiscoCells before -- being sent across the fabric. -- CSAR - Cisco Cell Segmentation And Reassembly, -- The name of an FPGA used on the RP which -- handles traffic between the processor -- and switch fabric. -- Request - A signal sent by a FIA (on a line card) -- to the SCA (on Master CSC) requesting a -- switch connection to a output linecard as an -- intent to transmit CiscoCells across. -- Grant - A signal sent by the SCA to a FIA (on a -- line card) granting a switch connection which -- was requested by the FIA. -- SRAM - Static Random Access Memory. -- LOS - Loss Of Signal. -- FPGA - Field Programmable Gate Array. -- RevDate -- 200209200000Z -- RevDescr -- Initial version of this MIB module. ciscoFabricC12kMIBNotifs OBJECT IDENTIFIER ::= { ciscoFabricC12kMIB 0 } ciscoFabricC12kMIBObjects OBJECT IDENTIFIER ::= { ciscoFabricC12kMIB 1 } ciscoFabricC12kMIBConform OBJECT IDENTIFIER ::= { ciscoFabricC12kMIB 2 } cfcGeneric OBJECT IDENTIFIER ::= { ciscoFabricC12kMIBObjects 1 } cfcGenericGlobal OBJECT IDENTIFIER ::= { cfcGeneric 1 } cfcGenericFab OBJECT IDENTIFIER ::= { cfcGeneric 2 } cfcGenericSca OBJECT IDENTIFIER ::= { cfcGeneric 3 } cfcGenericXbar OBJECT IDENTIFIER ::= { cfcGeneric 4 } cfcPreOc192 OBJECT IDENTIFIER ::= { ciscoFabricC12kMIBObjects 2 } cfcPreOc192Fab OBJECT IDENTIFIER ::= { cfcPreOc192 1 } cfcPreOc192Sca OBJECT IDENTIFIER ::= { cfcPreOc192 2 } cfcPreOc192Xbar OBJECT IDENTIFIER ::= { cfcPreOc192 3 } cfcOc192 OBJECT IDENTIFIER ::= { ciscoFabricC12kMIBObjects 3 } cfcOc192Fab OBJECT IDENTIFIER ::= { cfcOc192 1 } cfcOc192Sca OBJECT IDENTIFIER ::= { cfcOc192 2 } cfcOc192Xbar OBJECT IDENTIFIER ::= { cfcOc192 3 } cfcNotif OBJECT IDENTIFIER ::= { ciscoFabricC12kMIBObjects 4 } ciscoFabricC12kMIBCompliances OBJECT IDENTIFIER ::= { ciscoFabricC12kMIBConform 1 } ciscoFabricC12kMIBGroups OBJECT IDENTIFIER ::= { ciscoFabricC12kMIBConform 2 } CfcFabricConfigMode ::= INTEGER { invalidMode(1), quarterBwNonRedundant(2), quarterBwRedundant(3), fullBwNonRedundant(4), fullBwRedundant(5) } -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- An enumerated value that provides the current bandwidth -- and redundancy configuration of the fabric. -- -- The c12000 can have the following fabric configurations -- based on the number of fabric cards present in the system. -- -- 1) Invalid configuration mode, this mode indicates that -- the current fabric mode is invalid, this may be due to -- insufficient number of CSC or SFC cards in the system. -- -- 2) Quarter bandwidth non-redundant mode, this mode -- indicates that the bandwidth supported per slot by the -- switch is 1/4 th of the full bandwidth and there is no -- redundancy for the fabric failure. -- -- 3) Quarter bandwidth redundant mode, this mode indicates -- that the bandwidth supported per slot by the switch is -- 1/4 th of the full bandwidth and there is redundancy -- for the fabric failure. -- -- 4) Full bandwidth non-redundant mode, this mode indicates -- that the full bandwidth is supported per slot by the -- switch and there is no redundancy for the fabric -- failure. -- -- 5) Full bandwidth redundant mode, this mode indicates -- that the full bandwidth is supported per slot by the -- switch and there is redundancy for the fabric failure. -- -- Quarter bandwidth modes are applicable only for the systems -- with pre-OC192 fabric cards. CfcFabricFiaState ::= INTEGER { active(1), halted(2) } -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- Provides the current state of the FIA. -- -- active - FIA is currently active. -- -- halted - On reaching a test point for errors on FIA, -- the FIA will be moved to halted state. On clearance of -- the error state the FIA will be moved back to active -- state. CfcScaInterrupts ::= OCTET STRING(SIZE(1..2)) -- BITS are: -- lossOfSync(0) -- parityError(1) -- overflow(2) -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- Indicates different alarm conditions in the SCA. -- -- lossOfSync (0) == Interrupt caused by a loss-of-sync -- detection by SCA. -- parityError (1) == Interrupt caused by a request parity -- error detection by SCA. -- overflow (2) == Interrupt caused by a request -- overflow detection. CfcSlotMask ::= OCTET STRING(SIZE(0..255)) -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- Each bit in this value is used to represent a module, -- where the bit position represents the slot number of the -- module. -- Ex: To represent a module which is in slot 1, the bit -- position 1 in the octet string is set. cfcGenericGlobalFabConfigMode OBJECT-TYPE SYNTAX CfcFabricConfigMode -- Rsyntax INTEGER { -- invalidMode(1), -- quarterBwNonRedundant(2), -- quarterBwRedundant(3), -- fullBwNonRedundant(4), -- fullBwRedundant(5) -- } ACCESS read-only STATUS mandatory DESCRIPTION "This object gives the current bandwidth and redundancy configuration of fabric in the system." ::= { cfcGenericGlobal 1 } cfcGenericGlobalFabMasterSched OBJECT-TYPE SYNTAX EntPhysicalIndexOrZero -- Rsyntax INTEGER(0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object gives the entPhysicalIndex of the master scheduler fabric card in the system. If there is no master scheduler card then this object will return the value zero." ::= { cfcGenericGlobal 2 } cfcGenericFabToFabTable OBJECT-TYPE SYNTAX SEQUENCE OF CfcGenericFabToFabEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table providing ToFabFIA statistics and information in the managed system." ::= { cfcGenericFab 1 } cfcGenericFabToFabEntry OBJECT-TYPE SYNTAX CfcGenericFabToFabEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry providing various ToFabFIA statistics and information of the associated linecard identified by entPhysicalIndex." INDEX { entPhysicalIndex } ::= { cfcGenericFabToFabTable 1 } CfcGenericFabToFabEntry ::= SEQUENCE { cfcGenericFabToFabState CfcFabricFiaState, cfcGenericFabToFabGrantPEs Counter, cfcGenericFabToFabRequestPEs Counter, cfcGenericFabToFabCellFifoPEs Counter } cfcGenericFabToFabState OBJECT-TYPE SYNTAX CfcFabricFiaState -- Rsyntax INTEGER { -- active(1), -- halted(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the current state of the ToFabFIA. active - ToFabFIA is currently active. On reaching a test point for the FIA errors, the ToFabFIA will be moved to halted state." ::= { cfcGenericFabToFabEntry 1 } cfcGenericFabToFabGrantPEs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of parity errors detected by the ToFabFIA on the grant lines to SCA." ::= { cfcGenericFabToFabEntry 2 } cfcGenericFabToFabRequestPEs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of parity errors detected by the ToFabFIA on the request lines to SCA. These errors are detected by the SCA and fed back to the ToFabFIA." ::= { cfcGenericFabToFabEntry 3 } cfcGenericFabToFabCellFifoPEs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of cell parity errors detected by the ToFabFIA while dequeuing cells from the cell fifo." ::= { cfcGenericFabToFabEntry 4 } cfcGenericFabFrFabTable OBJECT-TYPE SYNTAX SEQUENCE OF CfcGenericFabFrFabEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table providing FrFabFIA information in the managed system." ::= { cfcGenericFab 2 } cfcGenericFabFrFabEntry OBJECT-TYPE SYNTAX CfcGenericFabFrFabEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry providing FrFabFIA information of the associated linecard identified by entPhysicalIndex." INDEX { entPhysicalIndex } ::= { cfcGenericFabFrFabTable 1 } CfcGenericFabFrFabEntry ::= SEQUENCE { cfcGenericFabFrFabState CfcFabricFiaState } cfcGenericFabFrFabState OBJECT-TYPE SYNTAX CfcFabricFiaState -- Rsyntax INTEGER { -- active(1), -- halted(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the current state of the FrFabFIA. active - FrFabFIA is currently active. On reaching a test point for the FIA errors, the FrFabFIA will be moved to halted state" ::= { cfcGenericFabFrFabEntry 1 } cfcGenericFabFrFabSliTable OBJECT-TYPE SYNTAX SEQUENCE OF CfcGenericFabFrFabSliEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table providing per serial link information maintained by the FrFabFIA in the managed system." ::= { cfcGenericFab 3 } cfcGenericFabFrFabSliEntry OBJECT-TYPE SYNTAX CfcGenericFabFrFabSliEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry providing per serial link information maintained by the FrFabFIA on an associated linecard." INDEX { entPhysicalIndex, cfcGenericFabFrFabSliFabIndex } ::= { cfcGenericFabFrFabSliTable 1 } CfcGenericFabFrFabSliEntry ::= SEQUENCE { cfcGenericFabFrFabSliFabIndex PhysicalIndex, cfcGenericFabFrFabSliLOSErrors Counter, cfcGenericFabFrFabSliCRCErrors Counter, cfcGenericFabFrFabSliLOSState INTEGER } cfcGenericFabFrFabSliFabIndex OBJECT-TYPE SYNTAX PhysicalIndex -- Rsyntax INTEGER(1..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "The entPhysicalIndex of the switch fabric cards (CSC/SFC) present in the monitored system." ::= { cfcGenericFabFrFabSliEntry 1 } cfcGenericFabFrFabSliLOSErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of LOS errors detected by the FrFabFIA on the serial link to the fabric card identified by cfcGenericFabFrFabSliFabIndex." ::= { cfcGenericFabFrFabSliEntry 2 } cfcGenericFabFrFabSliCRCErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of CRC errors detected by the FrFabFIA on the serial link to the fabric card identified by cfcGenericFabFrFabSliFabIndex." ::= { cfcGenericFabFrFabSliEntry 3 } cfcGenericFabFrFabSliLOSState OBJECT-TYPE SYNTAX INTEGER { losOff(1), losOn(2) } ACCESS read-only STATUS mandatory DESCRIPTION "State of LOS detection as enabled on FrFabFIA (identified by entPhysicalIndex) for the serial link to the switch fabric card identified by cfcGenericFabFrFabSliFabIndex. Value is either, (1) losOff (2) losOn A losOff state normally indicates that the FrFabFIA has detected a state of persisting LOS on the serial link and has disabled LOS detection for that serial link." ::= { cfcGenericFabFrFabSliEntry 4 } cfcGenericScaTable OBJECT-TYPE SYNTAX SEQUENCE OF CfcGenericScaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table providing SCA statistics and information in the managed system." ::= { cfcGenericSca 1 } cfcGenericScaEntry OBJECT-TYPE SYNTAX CfcGenericScaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry providing various statistics and information of SCA on an associated CSC identified by the respective entPhysicalIndex." INDEX { entPhysicalIndex } ::= { cfcGenericScaTable 1 } CfcGenericScaEntry ::= SEQUENCE { cfcGenericScaIdentifier SnmpAdminString, cfcGenericScaIntrStatus CfcScaInterrupts, cfcGenericScaIntrsEnabled CfcScaInterrupts, cfcGenericScaConfig OCTET STRING, cfcGenericScaPELog CfcSlotMask, cfcGenericScaFifoOverflowLog CfcSlotMask, cfcGenericScaLCsEnabled CfcSlotMask, cfcGenericScaForcedBackPressure CfcSlotMask, cfcGenericScaPreOc192LCsPresent CfcSlotMask, cfcGenericScaOc192LCsPresent CfcSlotMask } cfcGenericScaIdentifier OBJECT-TYPE SYNTAX SnmpAdminString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The vendor-specific identifier string of SCA ASIC. This identifier generally includes the revision number and the manufacturing part number of SCA." ::= { cfcGenericScaEntry 1 } cfcGenericScaIntrStatus OBJECT-TYPE SYNTAX CfcScaInterrupts -- Rsyntax OCTET STRING(SIZE(1..2)) -- BITS are: -- lossOfSync(0) -- parityError(1) -- overflow(2) ACCESS read-only STATUS mandatory DESCRIPTION "Gives the status/occurrence of different alarm conditions in the SCA. This object is a read-clear object, that is the value of the object is cleared on every read." ::= { cfcGenericScaEntry 2 } cfcGenericScaIntrsEnabled OBJECT-TYPE SYNTAX CfcScaInterrupts -- Rsyntax OCTET STRING(SIZE(1..2)) -- BITS are: -- lossOfSync(0) -- parityError(1) -- overflow(2) ACCESS read-only STATUS mandatory DESCRIPTION "Gives the list of different alarm conditions enabled to be generated by the SCA." ::= { cfcGenericScaEntry 3 } cfcGenericScaConfig OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..2)) -- BITS are: -- quarterBandwidth(0) -- halfBandwidth(1) -- fullBandwidth(2) -- enableParity(3) -- priMcast(4) -- priUnicast(5) -- priAlternating(6) -- earlyIntrOnLOS(7) -- noEarlyIntrOnLOS(8) -- forceXbarParityXer(9) -- forceGrantParityXer(10) -- unicastAcceptMode(11) -- forceXbarCrcOnCtlLink0(12) -- forceXbarCrcOnCtlLink1(13) -- forceXbarCrcOnCtlLink2(14) -- forceXbarCrcOnCtlLink3(15) ACCESS read-only STATUS mandatory DESCRIPTION "Gives the current configuration of the SCA ASIC. quarterBandwidth (0) -- 1/4th of the full bandwidth is supported per slot by the switch. halfBandwidth (1) -- 1/2th of the full bandwidth is supported per slot by the switch. fullBandwidth (2) -- Full bandwidth is supported per slot by the switch. enableParity (3) -- Parity handling by SCA is enabled. priMcast (4) -- Priority of Multicast requests is greater then Unicast requests. priUnicast (5) -- Priority of Unicast requests is greater then Multicast requests. priAlternating (6) -- Alternate the priority between pri-mcast and pri-unicast modes every cell clock. earlyIntrOnLOS (7) -- Cause early interrupt on loss-of-sync error. noEarlyIntrOnLOS (8) -- Allow time to resync on loss-of-sync error. forceXbarParityXer (9) -- Force bad parity on xbar on every cell clock. forceGrantParityXer (10) -- Force bad partity on grant to every line card. unicastAcceptMode (11) -- Enable unicast accept pointer updating only on cell periods when Unicast has higher priority over multicast. forceXbarCrcOnCtlLink0 (12)-- Force CRC error on Xbar control link 0. forceXbarCrcOnCtlLink0 (13)-- Force CRC error on Xbar control link 1. forceXbarCrcOnCtlLink0 (14)-- Force CRC error on Xbar control link 2. forceXbarCrcOnCtlLink0 (15)-- Force CRC error on Xbar control link 3." ::= { cfcGenericScaEntry 4 } cfcGenericScaPELog OBJECT-TYPE SYNTAX CfcSlotMask -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the modules which caused the parity error and resulted in an interrupt. The corresponding bit is set on occurrence of parity error for a module. This object is a read-clear object, that is the value of the object is cleared on every read." ::= { cfcGenericScaEntry 5 } cfcGenericScaFifoOverflowLog OBJECT-TYPE SYNTAX CfcSlotMask -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the modules which caused an overflow at the request fifo and resulted in an interrupt. The corresponding bit is set on occurrence of fifo overflow for a module. This object is a read-clear object, that is the value of the object is cleared on every read." ::= { cfcGenericScaEntry 6 } cfcGenericScaLCsEnabled OBJECT-TYPE SYNTAX CfcSlotMask -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the modules which are present and the SCA has been configured to start accepting requests from this module." ::= { cfcGenericScaEntry 7 } cfcGenericScaForcedBackPressure OBJECT-TYPE SYNTAX CfcSlotMask -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the linecards which exerted backpressure. SCA will not grant Xbar connection to these linecards." ::= { cfcGenericScaEntry 8 } cfcGenericScaOc192LCsPresent OBJECT-TYPE SYNTAX CfcSlotMask -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the OC192 linecards present in the monitored system. The corresponding bit is set for each linecard present, indicating the postion." ::= { cfcGenericScaEntry 9 } cfcGenericScaPreOc192LCsPresent OBJECT-TYPE SYNTAX CfcSlotMask -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the Pre-OC192 linecards present in the monitored system. The corresponding bit is set for each linecard present, indicating the position." ::= { cfcGenericScaEntry 10 } cfcGenericXbarTable OBJECT-TYPE SYNTAX SEQUENCE OF CfcGenericXbarEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table providing Xbar information in the managed system." ::= { cfcGenericXbar 1 } cfcGenericXbarEntry OBJECT-TYPE SYNTAX CfcGenericXbarEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry providing Xbar information on an associated fabric card identified by entPhysicalIndex." INDEX { entPhysicalIndex } ::= { cfcGenericXbarTable 1 } CfcGenericXbarEntry ::= SEQUENCE { cfcGenericXbarIdentifier SnmpAdminString } cfcGenericXbarIdentifier OBJECT-TYPE SYNTAX SnmpAdminString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The vendor-specific identifier string of Xbar ASIC. This identifier generally includes the revision number and the manufacturing part number of Xbar." ::= { cfcGenericXbarEntry 1 } cfcPreOc192FabToFabTable OBJECT-TYPE SYNTAX SEQUENCE OF CfcPreOc192FabToFabEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table providing pre-OC192 ToFabFIA statistics and information in the managed system." ::= { cfcPreOc192Fab 1 } cfcPreOc192FabToFabEntry OBJECT-TYPE SYNTAX CfcPreOc192FabToFabEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry providing various statistics and counters of pre-OC192 ToFabFIA on an associated linecard identified by entPhysicalIndex." INDEX { entPhysicalIndex } ::= { cfcPreOc192FabToFabTable 1 } CfcPreOc192FabToFabEntry ::= SEQUENCE { cfcPreOc192FabToFabScaLosts Counter, cfcPreOc192FabToFabUCFifoOvFlws Counter, cfcPreOc192FabToFabUCFifoUnFlws Counter, cfcPreOc192FabToFabMCFifoErrs Counter, cfcPreOc192FabToFabBmaPEs Counter, cfcPreOc192FabToFabBmaHskErrs Counter, cfcPreOc192FabToFabUniDestMCRqs Counter, cfcPreOc192FabToFabMultiDstUCRqs Counter, cfcPreOc192FabToFabEmptyDestRqs Counter } cfcPreOc192FabToFabScaLosts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of times the ToFabFIA lost contact with SCA(scheduler controller Asic) on master CSC." ::= { cfcPreOc192FabToFabEntry 1 } cfcPreOc192FabToFabUCFifoOvFlws OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of unicast fifo overflow errors on the ToFabFIA. Problems between BMA/CSAR and the ToFabFIA may be one of the reasons for these errors." ::= { cfcPreOc192FabToFabEntry 2 } cfcPreOc192FabToFabUCFifoUnFlws OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of unicast fifo underflow errors on the ToFabFIA. These errors are caused by the SCA granting without actually getting a request from the ToFabFIA." ::= { cfcPreOc192FabToFabEntry 3 } cfcPreOc192FabToFabMCFifoErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of multicast fifo overflow and underflow errors on the ToFabFIA. Problems between BMA/CSAR and the ToFabFIA may be one of the reasons for multicast fifo overflow errors. Underflow errors are caused by the SCA granting without actually getting a request from the ToFabFIA." ::= { cfcPreOc192FabToFabEntry 4 } cfcPreOc192FabToFabBmaPEs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of parity errors on cells received from BMA by the ToFabFIA." ::= { cfcPreOc192FabToFabEntry 5 } cfcPreOc192FabToFabBmaHskErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of handshake errors between the BMA/CSAR and the ToFabFIA." ::= { cfcPreOc192FabToFabEntry 6 } cfcPreOc192FabToFabUniDestMCRqs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of requests with single destination in a multicast request detected by ToFabFIA. The FIA will send this cell to the destination." ::= { cfcPreOc192FabToFabEntry 7 } cfcPreOc192FabToFabMultiDstUCRqs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of requests with multiple destinations in a unicast request detected by a ToFabFIA. The FIA will drop this cell." ::= { cfcPreOc192FabToFabEntry 8 } cfcPreOc192FabToFabEmptyDestRqs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of requests with empty destination detected by ToFabFIA. The FIA will drop this cell." ::= { cfcPreOc192FabToFabEntry 9 } cfcPreOc192FabFrFabTable OBJECT-TYPE SYNTAX SEQUENCE OF CfcPreOc192FabFrFabEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table providing pre-OC192 FrFabFIA statistics and information in the managed system." ::= { cfcPreOc192Fab 2 } cfcPreOc192FabFrFabEntry OBJECT-TYPE SYNTAX CfcPreOc192FabFrFabEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry providing various statistics and information of pre-OC192 FrFabFIA on an associated linecard identified by entPhysicalIndex." INDEX { entPhysicalIndex } ::= { cfcPreOc192FabFrFabTable 1 } CfcPreOc192FabFrFabEntry ::= SEQUENCE { cfcPreOc192FabFrFabCellFifoPEs Counter, cfcPreOc192FabFrFabRedFifoPEs Counter, cfcPreOc192FabFrFabRedFifoOvflws Counter, cfcPreOc192FabFrFabCellDrops Counter } cfcPreOc192FabFrFabCellFifoPEs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of cisco cell fifo parity errors detected by the FrFabFIA while dequeuing cells from the cell fifo." ::= { cfcPreOc192FabFrFabEntry 1 } cfcPreOc192FabFrFabRedFifoPEs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of redundant data fifo parity errors detected by the FrFabFIA." ::= { cfcPreOc192FabFrFabEntry 2 } cfcPreOc192FabFrFabRedFifoOvflws OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of redundant data fifo overflow errors detected by the FrFabFIA. This is caused if the back pressure is broken (i.e. the FrFabFIA exerts back pressure and the SCA keeps giving more data to it)." ::= { cfcPreOc192FabFrFabEntry 3 } cfcPreOc192FabFrFabCellDrops OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of number of cells dropped by the FrFabFIA. In case of non-redundant fabric configuration, cell drops can occur when a parity error is detected on one or more than one serial link. In case of redundant fabric configuration cell drops can occur when a cell gets corrupted on more than one serial link." ::= { cfcPreOc192FabFrFabEntry 4 } cfcPreOc192ScaTable OBJECT-TYPE SYNTAX SEQUENCE OF CfcPreOc192ScaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table providing pre-OC192 SCA statistics and information in the managed system." ::= { cfcPreOc192Sca 1 } cfcPreOc192ScaEntry OBJECT-TYPE SYNTAX CfcPreOc192ScaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry providing various statistics and information of pre-OC192 SCA on an associated CSC identified by entPhysicalIndex." INDEX { entPhysicalIndex } ::= { cfcPreOc192ScaTable 1 } CfcPreOc192ScaEntry ::= SEQUENCE { cfcPreOc192ScaReSyncDelay Gauge, cfcPreOc192ScaLOSLog CfcSlotMask } cfcPreOc192ScaReSyncDelay OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of cell periods that the SCA will allow the serial links connected to a module and Xbar to be resynced, if a loss-of-sync has occurred on the corresponding module. The value '0' indicates that on occurrence of LOS, the sca will only log the LOS event and do the scheduling for that module as normal." ::= { cfcPreOc192ScaEntry 1 } cfcPreOc192ScaLOSLog OBJECT-TYPE SYNTAX CfcSlotMask -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the LOS event occurrence on each linecard connected to this CSC. The corresponding bit is set on occurrence of LOS event on a line card. This object is a read-clear object, that is the value of the object is cleared on every read." ::= { cfcPreOc192ScaEntry 2 } cfcPreOc192XbarTable OBJECT-TYPE SYNTAX SEQUENCE OF CfcPreOc192XbarEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table providing Pre-OC192 Xbar statistics and information in the managed system." ::= { cfcPreOc192Xbar 1 } cfcPreOc192XbarEntry OBJECT-TYPE SYNTAX CfcPreOc192XbarEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry providing various statistics and information of Pre-OC192 Xbar on an associated fabric card identified by entPhysicalIndex." INDEX { entPhysicalIndex } ::= { cfcPreOc192XbarTable 1 } CfcPreOc192XbarEntry ::= SEQUENCE { cfcPreOc192XbarIntrStatus OCTET STRING, cfcPreOc192XbarParityChkStatus TruthValue } cfcPreOc192XbarIntrStatus OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..2)) -- BITS are: -- frameLossOfSync(0) -- parityErrorFromSca(1) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the occurrence of different alarm conditions in Xbar. This object is a read-clear object, that is the value of the object is cleared on every read." ::= { cfcPreOc192XbarEntry 1 } cfcPreOc192XbarParityChkStatus OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the parity check state in control data received from SCA to the Xbar. true(1) indicates that the parity check is enabled. false(2) indicates that the parity check is disabled." ::= { cfcPreOc192XbarEntry 2 } cfcOc192FabToFabTable OBJECT-TYPE SYNTAX SEQUENCE OF CfcOc192FabToFabEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table providing OC192 ToFabFIA statistics and information in the managed system." ::= { cfcOc192Fab 1 } cfcOc192FabToFabEntry OBJECT-TYPE SYNTAX CfcOc192FabToFabEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry providing various statistics and information of OC192 ToFabFIA on an associated linecard identified by entPhysicalIndex." INDEX { entPhysicalIndex } ::= { cfcOc192FabToFabTable 1 } CfcOc192FabToFabEntry ::= SEQUENCE { cfcOc192FabToFabMccDataPEs Counter, cfcOc192FabToFabMccCmdPEs Counter, cfcOc192FabToFabBackPressurePEs Counter, cfcOc192FabToFabCellFifoOvFlws Counter, cfcOc192FabToFabCellFifoUnFlws Counter, cfcOc192FabToFabMccCmdSeqEndErrs Counter, cfcOc192FabToFabMccCmdSeqStrErrs Counter } cfcOc192FabToFabMccDataPEs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of the parity errors on data lines from MCC to ToFabFIA. This error would cause the ToFabFIA to halt." ::= { cfcOc192FabToFabEntry 1 } cfcOc192FabToFabMccCmdPEs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of the parity errors on command lines from MCC to ToFabFIA. This error would cause the ToFabFIA to halt." ::= { cfcOc192FabToFabEntry 2 } cfcOc192FabToFabBackPressurePEs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of the parity errors on back pressure line from FrFabFIA to ToFabFIA. This error would cause the ToFabFIA to halt." ::= { cfcOc192FabToFabEntry 3 } cfcOc192FabToFabCellFifoOvFlws OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of the cell fifo overflow errors detected by the ToFabFIA. This error would cause the ToFabFIA to halt." ::= { cfcOc192FabToFabEntry 4 } cfcOc192FabToFabCellFifoUnFlws OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of the cell fifo underflow errors detected by the ToFabFIA. This error would cause the ToFabFIA to halt." ::= { cfcOc192FabToFabEntry 5 } cfcOc192FabToFabMccCmdSeqEndErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of the illegal sequence of command errors where a middle or start command followed by a start command is received from MCC." ::= { cfcOc192FabToFabEntry 6 } cfcOc192FabToFabMccCmdSeqStrErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of the illegal sequence of command errors where an end command followed by an end or middle command is received from MCC." ::= { cfcOc192FabToFabEntry 7 } cfcOc192FabFrFabTable OBJECT-TYPE SYNTAX SEQUENCE OF CfcOc192FabFrFabEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table providing FrFabFIA statistics and information in the managed system." ::= { cfcOc192Fab 2 } cfcOc192FabFrFabEntry OBJECT-TYPE SYNTAX CfcOc192FabFrFabEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry providing various statistics and information of OC192 FrFabFIA on an associated linecard identified by entPhysicalIndex." INDEX { entPhysicalIndex } ::= { cfcOc192FabFrFabTable 1 } CfcOc192FabFrFabEntry ::= SEQUENCE { cfcOc192FabFrFabPktLenErrs Counter, cfcOc192FabFrFabExtRamPEs Counter, cfcOc192FabFrFabPktLenPEs Counter, cfcOc192FabFrFabHdrSramPEs Counter, cfcOc192FabFrFabTxCtrlPEs Counter, cfcOc192FabFrFabHdrFifoOvFlws Counter, cfcOc192FabFrFabExtSramOvFlws Counter, cfcOc192FabFrFabFirstLastErrs Counter, cfcOc192FabFrFabSeqErrs Counter } cfcOc192FabFrFabPktLenErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of the packets (after reassembly from Cisco cells) which exceed the maximum permitted packet length of FrFabFIA. These packets will be dropped." ::= { cfcOc192FabFrFabEntry 1 } cfcOc192FabFrFabExtRamPEs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of the parity errors detected in FrFabFIA's external SRAM." ::= { cfcOc192FabFrFabEntry 2 } cfcOc192FabFrFabPktLenPEs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of the parity errors detected in payload packet length field of the FrFabFIA's Payload Header SRAM." ::= { cfcOc192FabFrFabEntry 3 } cfcOc192FabFrFabHdrSramPEs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of the parity errors detected in payload header field of the FrFabFIA's Payload Header SRAM." ::= { cfcOc192FabFrFabEntry 4 } cfcOc192FabFrFabTxCtrlPEs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of the parity errors detected on the Tx control bits of FrFabFIA." ::= { cfcOc192FabFrFabEntry 5 } cfcOc192FabFrFabHdrFifoOvFlws OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of the overflow errors in the FrFabFIA's reassembly fifos in the on-chip payload header SRAM." ::= { cfcOc192FabFrFabEntry 6 } cfcOc192FabFrFabExtSramOvFlws OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of the overflow errors in the FrFabFIA's reassembly external SRAM's payload fifos." ::= { cfcOc192FabFrFabEntry 7 } cfcOc192FabFrFabFirstLastErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of the First-Last errors detected by FrFabFIA's. If a first cell is received for a reassembly fifo, while an earlier packet in the same reassembly fifo is still waiting for its last cell, then it is called a First-Last Error." ::= { cfcOc192FabFrFabEntry 8 } cfcOc192FabFrFabSeqErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of the sequence errors detected by FrFabFIA in the cells received for reassembly. If a cell is received whose sequence number is not an unit increment from the previous cell of the same packet then it is a sequence error." ::= { cfcOc192FabFrFabEntry 9 } cfcOc192FabFrFabSliTable OBJECT-TYPE SYNTAX SEQUENCE OF CfcOc192FabFrFabSliEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table providing per serial link information maintained by the OC192 FrFabFIA in the managed system." ::= { cfcOc192Fab 3 } cfcOc192FabFrFabSliEntry OBJECT-TYPE SYNTAX CfcOc192FabFrFabSliEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry providing per serial link information maintained by the OC192 FrFabFIA on an associated linecard identified by entPhysicalIndex." INDEX { entPhysicalIndex, cfcOc192FabFrFabSliSwitchIndex } ::= { cfcOc192FabFrFabSliTable 1 } CfcOc192FabFrFabSliEntry ::= SEQUENCE { cfcOc192FabFrFabSliSwitchIndex PhysicalIndex, cfcOc192FabFrFabSliXorErrs Counter, cfcOc192FabFrFabSliCellDrops Counter } cfcOc192FabFrFabSliSwitchIndex OBJECT-TYPE SYNTAX PhysicalIndex -- Rsyntax INTEGER(1..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "The entPhysicalIndex of the switch fabric cards (CSC/SFC) present in the monitored system." ::= { cfcOc192FabFrFabSliEntry 1 } cfcOc192FabFrFabSliXorErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of the XOR check errors detected by FrFabFIA reassembly. The data paths are horizontally XORed and the result is expected to match the contents of the redundant path else it is counted as XOR error, this error applies only in redundant mode of fabric." ::= { cfcOc192FabFrFabSliEntry 2 } cfcOc192FabFrFabSliCellDrops OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of the total cells dropped by the FrFabFIA from the fabric card due to uncorrectable errors. Uncorrectable errors are the errors other than CRC, LOS, Horizontal XOR and idle cell which cannot be corrected." ::= { cfcOc192FabFrFabSliEntry 3 } cfcOc192FabFrFabStatTable OBJECT-TYPE SYNTAX SEQUENCE OF CfcOc192FabFrFabStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table providing per module statistics information maintained by the OC192 FrFabFIA in the managed system." ::= { cfcOc192Fab 4 } cfcOc192FabFrFabStatEntry OBJECT-TYPE SYNTAX CfcOc192FabFrFabStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry providing per module statistics information maintained by the OC192 FrFabFIA on an associated linecard identified by entPhysicalIndex." INDEX { entPhysicalIndex, cfcOc192FabFrFabStatLCIndex } ::= { cfcOc192FabFrFabStatTable 1 } CfcOc192FabFrFabStatEntry ::= SEQUENCE { cfcOc192FabFrFabStatLCIndex PhysicalIndex, cfcOc192FabFrFabStatUCHiPktDrops Counter, cfcOc192FabFrFabStatUCLoPktDrops Counter, cfcOc192FabFrFabStatMCHiPktDrops Counter, cfcOc192FabFrFabStatMCLoPktDrops Counter } cfcOc192FabFrFabStatLCIndex OBJECT-TYPE SYNTAX PhysicalIndex -- Rsyntax INTEGER(1..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "The entPhysicalIndex of the Line card present in the monitored system." ::= { cfcOc192FabFrFabStatEntry 1 } cfcOc192FabFrFabStatUCHiPktDrops OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of Unicast high priority packets dropped, from source module indicated by cfcOc192FabFrFabStatLCIndex." ::= { cfcOc192FabFrFabStatEntry 2 } cfcOc192FabFrFabStatUCLoPktDrops OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of Unicast low priority packets dropped, from source module indicated by cfcOc192FabFrFabStatLCIndex." ::= { cfcOc192FabFrFabStatEntry 3 } cfcOc192FabFrFabStatMCHiPktDrops OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of Multicast high priority packets dropped, from source module indicated by cfcOc192FabFrFabStatLCIndex." ::= { cfcOc192FabFrFabStatEntry 4 } cfcOc192FabFrFabStatMCLoPktDrops OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of Multicast low priority packets dropped, from source module indicated by cfcOc192FabFrFabStatLCIndex." ::= { cfcOc192FabFrFabStatEntry 5 } cfcOc192ScaTable OBJECT-TYPE SYNTAX SEQUENCE OF CfcOc192ScaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table providing OC192 SCA statistics and information in the managed system." ::= { cfcOc192Sca 1 } cfcOc192ScaEntry OBJECT-TYPE SYNTAX CfcOc192ScaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry providing various statistics and information of OC192 SCA on an associated CSC identified by entPhysicalIndex." INDEX { entPhysicalIndex } ::= { cfcOc192ScaTable 1 } CfcOc192ScaEntry ::= SEQUENCE { cfcOc192ScaRotationPeriod Gauge, cfcOc192ScaDisableGrants CfcSlotMask } cfcOc192ScaRotationPeriod OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Determines the period of rotating the priority between Unicast and Multicast, in cell periods, when the SCA is configured with alternating priority mode. For example, if the value of this object is 63 then the priority will change every 64 cell periods, if the value is 0 then the priority will change every cell period." ::= { cfcOc192ScaEntry 1 } cfcOc192ScaDisableGrants OBJECT-TYPE SYNTAX CfcSlotMask -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the disable of grants by SCA to any requests coming from a specific module. The corresponding bit is set for each module." ::= { cfcOc192ScaEntry 2 } cfcOc192XbarTable OBJECT-TYPE SYNTAX SEQUENCE OF CfcOc192XbarEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table providing OC192 Xbar statistics and information in the managed system." ::= { cfcOc192Xbar 1 } cfcOc192XbarEntry OBJECT-TYPE SYNTAX CfcOc192XbarEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry providing various statistics and information of OC192 Xbar on an associated fabric card identified by entPhysicalIndex." INDEX { entPhysicalIndex } ::= { cfcOc192XbarTable 1 } CfcOc192XbarEntry ::= SEQUENCE { cfcOc192XbarCtrlLOSStatus OCTET STRING, cfcOc192XbarCtrlCRCErr OCTET STRING } cfcOc192XbarCtrlLOSStatus OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..2)) -- BITS are: -- frameLosErr(0) -- sliErrorOnControlLink0(1) -- sliErrorOnControlLink1(2) -- sliErrorOnControlLink2(3) -- sliErrorOnControlLink3(4) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the occurrence of LOS errors on the control path of Xbar. frameLosErr (0) -- Frame LOS error. sliErrorOnControlLink0 (1) -- LOS detected on SLI control link 0. sliErrorOnControlLink1 (2) -- LOS detected on SLI control link 1. sliErrorOnControlLink2 (3) -- LOS detected on SLI control link 2. sliErrorOnControlLink3 (4) -- LOS detected on SLI control link 3. This object is a read-clear object, that is the value of the object is cleared on every read." ::= { cfcOc192XbarEntry 1 } cfcOc192XbarCtrlCRCErr OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..2)) -- BITS are: -- ctlCrcErrorLink0(0) -- ctlCrcErrorLink1(1) -- ctlCrcErrorLink2(2) -- ctlCrcErrorLink3(3) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the occurrence of CRC error on any of the four control links. This object is a read-clear object, that is the value of the object is cleared on every read." ::= { cfcOc192XbarEntry 2 } cfcNotifEnable OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates whether the system produces the notifications defined in the MIB. A false value will prevent the notifications in the MIB from being generated by the system." DEFVAL { false } ::= { cfcNotif 1 } ciscoFabricC12kMIBFabMasterSchCh TRAP-TYPE -- Reverse mappable trap ENTERPRISE ciscoFabricC12kMIB VARIABLES { cfcGenericGlobalFabMasterSched, entPhysicalName } -- Status -- mandatory DESCRIPTION "This notification is generated when master scheduler on the system changes. It typically indicates the switchover of the scheduler card. cfcGenericGlobalFabMasterSched represents the entPhysicalIndex of the new master scheduler card, while entPhysicalName represents the entity physical name of the card. The case of all scheduler cards going down would be represented by a value 0 for the cfcGenericGlobalFabMasterSched and noSuchInstance for the entPhysicalName." ::= 1 ciscoFabricC12kGlobalGroup OBJECT IDENTIFIER ::= { ciscoFabricC12kMIBGroups 1 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of Global fabric configuration -- objects. -- objects -- cfcGenericGlobalFabConfigMode, cfcGenericGlobalFabMasterSched ciscoFabricC12kFiaGroup OBJECT IDENTIFIER ::= { ciscoFabricC12kMIBGroups 2 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of generic FIA status and statistics -- objects. -- objects -- cfcGenericFabToFabState, cfcGenericFabToFabGrantPEs, -- cfcGenericFabToFabRequestPEs, cfcGenericFabToFabCellFifoPEs, -- cfcGenericFabFrFabState, cfcGenericFabFrFabSliLOSErrors, -- cfcGenericFabFrFabSliCRCErrors, cfcGenericFabFrFabSliLOSState ciscoFabricC12kScaGroup OBJECT IDENTIFIER ::= { ciscoFabricC12kMIBGroups 3 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of generic SCA status objects. -- objects -- cfcGenericScaIdentifier, cfcGenericScaIntrStatus, -- cfcGenericScaIntrsEnabled, cfcGenericScaConfig, -- cfcGenericScaPELog, cfcGenericScaFifoOverflowLog, -- cfcGenericScaLCsEnabled, cfcGenericScaForcedBackPressure, -- cfcGenericScaPreOc192LCsPresent ciscoFabricC12kXbarGroup OBJECT IDENTIFIER ::= { ciscoFabricC12kMIBGroups 4 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of generic Xbar status objects. -- objects -- cfcGenericXbarIdentifier ciscoFabricC12kPreOc192FiaGroup OBJECT IDENTIFIER ::= { ciscoFabricC12kMIBGroups 5 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of pre-OC192 FIA status and statistics -- objects. -- objects -- cfcPreOc192FabToFabScaLosts, cfcPreOc192FabToFabUCFifoOvFlws, -- cfcPreOc192FabToFabUCFifoUnFlws, -- cfcPreOc192FabToFabMCFifoErrs, cfcPreOc192FabToFabBmaPEs, -- cfcPreOc192FabToFabBmaHskErrs, -- cfcPreOc192FabToFabUniDestMCRqs, -- cfcPreOc192FabToFabMultiDstUCRqs, -- cfcPreOc192FabToFabEmptyDestRqs, -- cfcPreOc192FabFrFabCellFifoPEs, cfcPreOc192FabFrFabRedFifoPEs, -- cfcPreOc192FabFrFabRedFifoOvflws, -- cfcPreOc192FabFrFabCellDrops ciscoFabricC12kPreOc192ScaGroup OBJECT IDENTIFIER ::= { ciscoFabricC12kMIBGroups 6 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of Pre-OC192 SCA status objects. -- objects -- cfcPreOc192ScaReSyncDelay, cfcPreOc192ScaLOSLog ciscoFabricC12kPreOc192XbarGroup OBJECT IDENTIFIER ::= { ciscoFabricC12kMIBGroups 7 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of Pre-Oc192 Xbar status objects. -- objects -- cfcPreOc192XbarIntrStatus, cfcPreOc192XbarParityChkStatus ciscoFabricC12kOc192FiaGroup OBJECT IDENTIFIER ::= { ciscoFabricC12kMIBGroups 8 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of OC192 FIA status and statistics -- objects. -- objects -- cfcOc192FabToFabMccDataPEs, cfcOc192FabToFabMccCmdPEs, -- cfcOc192FabToFabBackPressurePEs, -- cfcOc192FabToFabCellFifoOvFlws, -- cfcOc192FabToFabCellFifoUnFlws, -- cfcOc192FabToFabMccCmdSeqEndErrs, -- cfcOc192FabToFabMccCmdSeqStrErrs, cfcOc192FabFrFabPktLenErrs, -- cfcOc192FabFrFabExtRamPEs, cfcOc192FabFrFabPktLenPEs, -- cfcOc192FabFrFabHdrSramPEs, cfcOc192FabFrFabTxCtrlPEs, -- cfcOc192FabFrFabHdrFifoOvFlws, cfcOc192FabFrFabExtSramOvFlws, -- cfcOc192FabFrFabFirstLastErrs, cfcOc192FabFrFabSeqErrs, -- cfcOc192FabFrFabSliXorErrs, cfcOc192FabFrFabSliCellDrops, -- cfcOc192FabFrFabStatUCHiPktDrops, -- cfcOc192FabFrFabStatUCLoPktDrops, -- cfcOc192FabFrFabStatMCHiPktDrops, -- cfcOc192FabFrFabStatMCLoPktDrops ciscoFabricC12kOc192LCGroup OBJECT IDENTIFIER ::= { ciscoFabricC12kMIBGroups 9 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of OC192 linecard generic objects. -- objects -- cfcGenericScaOc192LCsPresent ciscoFabricC12kOc192ScaGroup OBJECT IDENTIFIER ::= { ciscoFabricC12kMIBGroups 10 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of OC192 SCA status objects. -- objects -- cfcOc192ScaRotationPeriod, cfcOc192ScaDisableGrants ciscoFabricC12kOc192XbarGroup OBJECT IDENTIFIER ::= { ciscoFabricC12kMIBGroups 11 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of OC192 Xbar status objects. -- objects -- cfcOc192XbarCtrlLOSStatus, cfcOc192XbarCtrlCRCErr ciscoFabricC12kNotifEnableGroup OBJECT IDENTIFIER ::= { ciscoFabricC12kMIBGroups 12 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- The collection of objects which are used to -- control generation of notification. -- objects -- cfcNotifEnable ciscoFabricC12kNotifGroup OBJECT IDENTIFIER ::= { ciscoFabricC12kMIBGroups 13 } -- NOTIFICATION-GROUP -- Status -- mandatory -- Descr -- A collection of notifications generated by -- the devices supporting this MIB. -- notifications -- ciscoFabricC12kMIBFabMasterSchCh ciscoFabricC12kMIBCompliance OBJECT IDENTIFIER ::= { ciscoFabricC12kMIBCompliances 1 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- The compliance statement for entities which implement -- the CISCO-FABRIC-C12K-MIB. -- Module -- >>current<< -- MandGroup -- ciscoFabricC12kGlobalGroup -- MandGroup -- ciscoFabricC12kFiaGroup -- MandGroup -- ciscoFabricC12kScaGroup -- MandGroup -- ciscoFabricC12kXbarGroup -- MandGroup -- ciscoFabricC12kPreOc192FiaGroup -- MandGroup -- ciscoFabricC12kNotifEnableGroup -- MandGroup -- ciscoFabricC12kNotifGroup -- OptGroup -- ciscoFabricC12kPreOc192ScaGroup -- OptGroup -- ciscoFabricC12kPreOc192XbarGroup -- OptGroup -- ciscoFabricC12kOc192FiaGroup -- OptGroup -- ciscoFabricC12kOc192LCGroup -- OptGroup -- ciscoFabricC12kOc192ScaGroup -- OptGroup -- ciscoFabricC12kOc192XbarGroup END