-- MIB file created 21-Sep-2009 18:07:33, by -- SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com CISCO-FCOE-MIB DEFINITIONS ::= BEGIN -- From file: "CISCO-FCOE-MIB.my" -- Compile options "4 7 F H N O W 03 06 0B 0G 0N 0T" IMPORTS RowStatus, TimeStamp, TruthValue, MacAddress FROM SNMPv2-TC-v1 SnmpAdminString FROM SNMP-FRAMEWORK-MIB InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB T11FabricIndex FROM T11-TC-MIB fcmInstanceIndex, fcmSwitchIndex FROM FC-MGMT-MIB VlanIndex FROM Q-BRIDGE-MIB ciscoMgmt FROM CISCO-SMI Gauge FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212; ciscoFCoEMIB OBJECT IDENTIFIER ::= { ciscoMgmt 673 } -- MODULE-IDENTITY -- LastUpdated -- 200806160000Z -- OrgName -- Cisco Systems Inc. -- ContactInfo -- Cisco Systems -- Customer Service -- Postal: 170 W Tasman Drive -- -- San Jose, CA 95134 -- -- USA -- -- Tel: +1 800 553 -NETS -- -- E-mail: fcoe@cisco.com -- Descr -- This MIB module is for configuring and monitoring Fibre Channel -- over Ethernet (FCoE) related entities. This MIB defines the -- Virtual FC (VFC) Interface as an object that represents either -- a VF_Port or a VE_Port on the FCF. Virtual FC interfaces can be -- either statically created or dynamically created at the time of -- FIP based FLOGI or ELP request. -- -- In this document the term VSAN ID is used interchangeably with -- Fabric Index defined in the T11 standards. -- -- Terminologies used in this MIB are defined by the T11 FCoE -- standard. Refer to www.t11.org. -- -- This MIB also supports configuration of the following objects: -- - Mapping of FCoE VLAN ID used to carry traffic for a VSAN ID -- - FC-MAP value used by the FCF operating in FPMA mode -- - FIP snooping related objects -- RevDate -- 200806160000Z -- RevDescr -- Initial version of this MIB module. ciscoFCoEMIBObjects OBJECT IDENTIFIER ::= { ciscoFCoEMIB 1 } ciscoFCoEMIBConformance OBJECT IDENTIFIER ::= { ciscoFCoEMIB 2 } cfcoeConfig OBJECT IDENTIFIER ::= { ciscoFCoEMIBObjects 1 } cfcoeFipSnoopingObjects OBJECT IDENTIFIER ::= { ciscoFCoEMIBObjects 2 } cFCoEMIBCompliances OBJECT IDENTIFIER ::= { ciscoFCoEMIBConformance 1 } cFCoEMIBGroups OBJECT IDENTIFIER ::= { ciscoFCoEMIBConformance 2 } VfcBindType ::= INTEGER { interfaceIndex(1), macAddress(2) } -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- Defines the different methods to identify (or bind to) -- - the ENode associated with a particular VF_Port VFC -- - the remote-FCF associated with a particular VE_Port VFC -- -- interfaceIndex(1) - This type is used when the ifIndex of -- an ethernet interface over which the FCF reaches -- the ENode or the remote-FCF is used to identify the -- ENode or the remote-FCF. This type is to be used only -- when the ENode or the remote-FCF is directly connected -- to the FCF over a specific ethernet interface. -- -- macAddress(2) - This type is used when the ENode or the -- remote-FCF is reachable by the FCF over a L2 Ethernet -- network. An ENode or remote-FCF is associated to a VFC -- only if the source MAC address in the FIP frames matches -- with the bound MAC Address on the VFC. cfcoeCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF CfcoeCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table facilitates configuration of FCoE parameters on a per Fibre Channel management instance." ::= { cfcoeConfig 1 } cfcoeCfgEntry OBJECT-TYPE SYNTAX CfcoeCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "There is one entry in this table for each Fibre Channel management instance." INDEX { fcmInstanceIndex, fcmSwitchIndex } ::= { cfcoeCfgTable 1 } CfcoeCfgEntry ::= SEQUENCE { cfcoeCfgFcmap OCTET STRING, cfcoeCfgDynamicVfcCreation TruthValue, cfcoeCfgDynamicVfcAgeTimer Gauge, cfcoeCfgDefaultFCFPriority Gauge, cfcoeCfgDATov Gauge, cfcoeCfgAddressingMode INTEGER } cfcoeCfgFcmap OBJECT-TYPE SYNTAX OCTET STRING(SIZE(3)) ACCESS read-write STATUS mandatory DESCRIPTION "This object configures the FC-MAP value used by the FCF when operating in FPMA mode. The default value is 0EFC00h, as written in the standard." REFERENCE "ANSI INCITS xxx-200x, T11/Project 1871-D, Fibre Channel - Backbone 5 (FC-BB-5), 10 June 2008, section 7.8 and table 41." DEFVAL { '0EFC00'H } ::= { cfcoeCfgEntry 1 } cfcoeCfgDynamicVfcCreation OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object allows the user to enable (TRUE) or disable (FALSE) dynamic VFC interface creation on the FCF. When set to TRUE VFC interfaces are dynamically created when a FIP based FLOGI or ELP request is received." DEFVAL { false } ::= { cfcoeCfgEntry 2 } cfcoeCfgDynamicVfcAgeTimer OBJECT-TYPE SYNTAX Gauge(10..1000000) ACCESS read-write STATUS mandatory DESCRIPTION "This ageing timer (in seconds) is used by the FCF to age out dynamically created VFC interfaces. The default value is 300 seconds." DEFVAL { 300 } ::= { cfcoeCfgEntry 3 } cfcoeCfgDefaultFCFPriority OBJECT-TYPE SYNTAX Gauge(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The FIP priority value advertised by the FCF to ENodes by default. cfcoeStaticVfcFCFPriority configured for a VFC interface overrides this setting for the ENode associated with the VFC." DEFVAL { 128 } ::= { cfcoeCfgEntry 4 } cfcoeCfgDATov OBJECT-TYPE SYNTAX Gauge(1..60) ACCESS read-write STATUS mandatory DESCRIPTION "The Discovery_Advertisement_Timeout value configured for the FCF. This is used as the timeout value in seconds by the FCF to send periodic Discovery Advertisements." DEFVAL { 5 } ::= { cfcoeCfgEntry 5 } cfcoeCfgAddressingMode OBJECT-TYPE SYNTAX INTEGER { fpma(1), spma(2), both(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Addressing mode(s) supported by the FCF. Implementations should fail set requests for unsupported modes." ::= { cfcoeCfgEntry 6 } cfcoeVLANTable OBJECT-TYPE SYNTAX SEQUENCE OF CfcoeVLANEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table facilitates configuration of VLAN and Fabric (VSAN) associations in an FCoE network. FCoE forwarding for a fabric is over a VLAN in a L2 Ethernet network. That is, reachability between the ENode/remote-FCF and an FCF for a given fabric is determined by the reachability provided by the Ethernet network on the corresponding VLAN. An active entry in this table indicates the VLAN that is used to transport FCoE traffic for a certain VSAN. Some implmentations may allow traffic from only one VSAN to be transported over a given VLAN. Such implmentations should prevent multiple entries with the same VLAN ID or the VSAN ID from being created in this table. Modifying existing VLAN-VSAN associations is not supported. Entries must be deleted first and then recreated." ::= { cfcoeConfig 2 } cfcoeVLANEntry OBJECT-TYPE SYNTAX CfcoeVLANEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "There is one entry in this table for each VLAN that is designated to transport FCoE traffic for a given fabric (VSAN)." INDEX { fcmInstanceIndex, fcmSwitchIndex, cfcoeVLANIndex, cfcoeFabricIndex } ::= { cfcoeVLANTable 1 } CfcoeVLANEntry ::= SEQUENCE { cfcoeVLANIndex VlanIndex, cfcoeFabricIndex T11FabricIndex, cfcoeVLANOperState INTEGER, cfcoeVLANRowStatus RowStatus } cfcoeVLANIndex OBJECT-TYPE SYNTAX VlanIndex -- Rsyntax Gauge ACCESS not-accessible STATUS mandatory DESCRIPTION "This object identifies the VLAN ID that FCoE FCF function is being enabled for." ::= { cfcoeVLANEntry 1 } cfcoeFabricIndex OBJECT-TYPE SYNTAX T11FabricIndex -- Rsyntax Gauge(0..4095) ACCESS not-accessible STATUS mandatory DESCRIPTION "This object identifies the Fabric Index of the VSAN traffic for which can be transported over the VLAN identified by cfcoeVLANIndex." ::= { cfcoeVLANEntry 2 } cfcoeVLANOperState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Operational state of this VLAN-VSAN association entry. The 'up' state is achieved when both the VSAN and VLAN are valid." ::= { cfcoeVLANEntry 3 } cfcoeVLANRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "The status of this conceptual row. The RowStatus becomes active on successful creation of an entry." ::= { cfcoeVLANEntry 4 } cfcoeStaticVfcTable OBJECT-TYPE SYNTAX SEQUENCE OF CfcoeStaticVfcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table facilitates the creation and deletion of static VFC interfaces. While VFCs can be dynamically created based on FIP FLOGI/ELP requests users may want to associate certain pre-configured policy for a particular ENode or a remote-FCF. In such cases static VFC creation becomes necessary. In addition to creating a static VFC it also needs to be associated to an ENode or remote-FCF. The VFC binding provides such an associaton. Binding may occur after a VFC is created." ::= { cfcoeConfig 3 } cfcoeStaticVfcEntry OBJECT-TYPE SYNTAX CfcoeStaticVfcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "There is one entry in this table for each statically created VFC Interface." INDEX { fcmInstanceIndex, fcmSwitchIndex, cfcoeStaticVfcIndex } ::= { cfcoeStaticVfcTable 1 } CfcoeStaticVfcEntry ::= SEQUENCE { cfcoeStaticVfcIndex Gauge, cfcoeStaticVfcFCFPriority Gauge, cfcoeStaticVfcBindType VfcBindType, cfcoeStaticVfcBindIfIndex InterfaceIndexOrZero, cfcoeStaticVfcBindMACAddress MacAddress, cfcoeStaticVfcIfIndex InterfaceIndex, cfcoeStaticVfcCreationTime TimeStamp, cfcoeStaticVfcFailureCause SnmpAdminString, cfcoeStaticVfcRowStatus RowStatus } cfcoeStaticVfcIndex OBJECT-TYPE SYNTAX Gauge(1..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "This index uniquely identifies a static VFC entry in this table." ::= { cfcoeStaticVfcEntry 1 } cfcoeStaticVfcFCFPriority OBJECT-TYPE SYNTAX Gauge(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "If this VFC is for a VF_Port this object is used to configure FCF priority to be advertised to the ENode associated with the VFC." DEFVAL { 128 } ::= { cfcoeStaticVfcEntry 2 } cfcoeStaticVfcBindType OBJECT-TYPE SYNTAX VfcBindType -- Rsyntax INTEGER { -- interfaceIndex(1), -- macAddress(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "The mechanism to identify the ENode associated with this VFC if it is of type VF_Port or to identify the remote-FCF associated with this VFC if it is of type VE_Port." ::= { cfcoeStaticVfcEntry 3 } cfcoeStaticVfcBindIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero -- Rsyntax INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "This object allows for configuration of ifIndex of the ethernet interface over which the FCF reaches the ENode or the remote-FCF that this VFC identifies. This object is to be used only when the ENode or the remote-FCF is directly connected to the FCF over a specific ethernet interface. If the ENode or remote-FCF is not directly connected to the FCF, this field must be set to zero." ::= { cfcoeStaticVfcEntry 4 } cfcoeStaticVfcBindMACAddress OBJECT-TYPE SYNTAX MacAddress -- Rsyntax OCTET STRING(SIZE(6)) ACCESS read-write STATUS mandatory DESCRIPTION "This object allows the user to configure MAC address of the ENode or the remote-FCF that this VFC interface identifies. An ENode or remote-FCF is associated to this VFC only if the source MAC address in the FIP frames matches with this object." ::= { cfcoeStaticVfcEntry 5 } cfcoeStaticVfcIfIndex OBJECT-TYPE SYNTAX InterfaceIndex -- Rsyntax INTEGER(1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The ifIndex of this virtual FC interface." ::= { cfcoeStaticVfcEntry 6 } cfcoeStaticVfcCreationTime OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The timestamp of this entry's creation time." ::= { cfcoeStaticVfcEntry 7 } cfcoeStaticVfcFailureCause OBJECT-TYPE SYNTAX SnmpAdminString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The cause of failure for the last bind operation. This object will be zero length if and only if the bind is successful." ::= { cfcoeStaticVfcEntry 8 } cfcoeStaticVfcRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "The status of this conceptual row. The RowStatus becomes active on successful creation of a virtual interface. The VFC must be bound before it can become operational." ::= { cfcoeStaticVfcEntry 9 } cfcoeFipSnoopingEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to enable or disable FIP Snooping on an Ethernet Bridge." ::= { cfcoeFipSnoopingObjects 1 } cfcoeFipSnoopingFcmap OBJECT-TYPE SYNTAX OCTET STRING(SIZE(3)) ACCESS read-write STATUS mandatory DESCRIPTION "This object configures the FC-MAP value associated with the FIP snooping Ethernet bridge." DEFVAL { '0EFC00'H } ::= { cfcoeFipSnoopingObjects 2 } cfcoeEnodeIntfTable OBJECT-TYPE SYNTAX SEQUENCE OF CfcoeEnodeIntfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The (conceptual) table containing the interfaces on an Ethernet bridge that are directly connected to ENodes. A FIP Snooping bridge will automatically configure ACLs on these interfaces based on FIP login requests and responses." ::= { cfcoeFipSnoopingObjects 3 } cfcoeEnodeIntfEntry OBJECT-TYPE SYNTAX CfcoeEnodeIntfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (conceptual row) in the cfcoeEnodeIntfTable, representing an interface directly connected to an ENode on the Ethernet Bridge." INDEX { cfcoeEnodeIntfIfIndex } ::= { cfcoeEnodeIntfTable 1 } CfcoeEnodeIntfEntry ::= SEQUENCE { cfcoeEnodeIntfIfIndex InterfaceIndex, cfcoeEnodeIntfRowStatus RowStatus } cfcoeEnodeIntfIfIndex OBJECT-TYPE SYNTAX InterfaceIndex -- Rsyntax INTEGER(1..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "The ifIndex of the interface on the Ethernet bridge connected to an Enode." ::= { cfcoeEnodeIntfEntry 1 } cfcoeEnodeIntfRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "The status of this conceptual row." ::= { cfcoeEnodeIntfEntry 2 } cfcoeCfgConformanceObjects OBJECT IDENTIFIER ::= { cFCoEMIBGroups 1 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects related to all implementations -- of FCoE. -- objects -- cfcoeCfgFcmap, cfcoeCfgDynamicVfcCreation, -- cfcoeCfgDynamicVfcAgeTimer, cfcoeCfgDefaultFCFPriority, -- cfcoeCfgDATov, cfcoeCfgAddressingMode cfcoeVLANConformanceObjects OBJECT IDENTIFIER ::= { cFCoEMIBGroups 2 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects related to implementation of -- FCoE VLANs. -- objects -- cfcoeVLANOperState, cfcoeVLANRowStatus cfcoeStaticVfcConformanceObjects OBJECT IDENTIFIER ::= { cFCoEMIBGroups 3 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects related to implementation of -- static VFC interfaces. -- objects -- cfcoeStaticVfcFCFPriority, cfcoeStaticVfcBindType, -- cfcoeStaticVfcBindIfIndex, cfcoeStaticVfcBindMACAddress, -- cfcoeStaticVfcIfIndex, cfcoeStaticVfcCreationTime, -- cfcoeStaticVfcFailureCause, cfcoeStaticVfcRowStatus cfcoeFipSnoopingConformanceObjects OBJECT IDENTIFIER ::= { cFCoEMIBGroups 4 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects related to implementation of -- FIP Snooping. -- objects -- cfcoeFipSnoopingEnable, cfcoeFipSnoopingFcmap cfcoeEnodeIntfObjects OBJECT IDENTIFIER ::= { cFCoEMIBGroups 5 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects related to implementation of -- ENode interfaces on a FIP snooping bridge. -- objects -- cfcoeEnodeIntfRowStatus cFCoEMIBCompliance OBJECT IDENTIFIER ::= { cFCoEMIBCompliances 1 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- The compliance statement for entities which implement the -- CISCO-FCOE-MIB mib. -- Module -- >>current<< -- MandGroup -- cfcoeCfgConformanceObjects -- MandGroup -- cfcoeVLANConformanceObjects -- MandGroup -- cfcoeStaticVfcConformanceObjects -- MandGroup -- cfcoeFipSnoopingConformanceObjects -- MandGroup -- cfcoeEnodeIntfObjects -- ObjVar -- cfcoeCfgFcmap -- ObjVar -- cfcoeVLANRowStatus -- ObjVar -- cfcoeFipSnoopingEnable -- ObjVar -- cfcoeFipSnoopingFcmap END