-- MIB file created 12-May-2006 08:27:36, by -- SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com CISCO-FTP-CLIENT-MIB DEFINITIONS ::= BEGIN -- From file: "CISCO-FTP-CLIENT-MIB.my" -- Compile options "4 7 F H N O W 03 06 0B 0G 0N 0T" IMPORTS TimeStamp, RowStatus, DisplayString FROM SNMPv2-TC-v1 ciscoMgmt FROM CISCO-SMI Counter, Gauge FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212; ciscoFtpClientMIB OBJECT IDENTIFIER ::= { ciscoMgmt 80 } -- MODULE-IDENTITY -- LastUpdated -- 200603310000Z -- OrgName -- Cisco Systems, Inc. -- ContactInfo -- Cisco Systems -- Customer Service -- -- Postal: 170 W Tasman Drive -- San Jose, CA 95134 -- USA -- -- Tel: +1 800 553-NETS -- -- E-mail: cs-snmp@cisco.com -- Descr -- The MIB module for invoking Internet File Transfer Protocol -- (FTP) operations for network management purposes. -- RevDate -- 200603310000Z -- RevDescr -- Updated the imports such that Unsigned32 is imported from -- SNMPv2-SMI instead of CISCO-TC. -- RevDate -- 199710091700Z -- RevDescr -- Initial version. ciscoFtpClientMIBObjects OBJECT IDENTIFIER ::= { ciscoFtpClientMIB 1 } cfcRequest OBJECT IDENTIFIER ::= { ciscoFtpClientMIBObjects 1 } ciscoFtpClientMIBConformance OBJECT IDENTIFIER ::= { ciscoFtpClientMIB 3 } ciscoFtpClientMIBCompliances OBJECT IDENTIFIER ::= { ciscoFtpClientMIBConformance 1 } ciscoFtpClientMIBGroups OBJECT IDENTIFIER ::= { ciscoFtpClientMIBConformance 2 } cfcRequestMaximum OBJECT-TYPE SYNTAX Gauge(0..4294967295) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of requests this system can hold in cfcRequestTable. A value of 0 indicates no configured limit. This object may be read-only on some systems. When an attempt is made to create a new entry but the table is full, the oldest completed entry is bumped out and cfcRequestsBumped is incremented. Changing this number does not disturb existing requests that are not completed and bumps completed requests as necessary." ::= { cfcRequest 1 } cfcRequests OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The current number of requests in cfcRequestTable." ::= { cfcRequest 2 } cfcRequestsHigh OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The highest number of requests in cfcRequestTable since this system was last initialized." ::= { cfcRequest 3 } cfcRequestsBumped OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of requests in cfcRequestTable that were bumped out to make room for a new request." ::= { cfcRequest 4 } cfcRequestTable OBJECT-TYPE SYNTAX SEQUENCE OF CfcRequestEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of FTP client requests." ::= { cfcRequest 5 } cfcRequestEntry OBJECT-TYPE SYNTAX CfcRequestEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about an FTP client request. Management applications use cfcRequestEntryStatus to control entry modification, creation, and deletion. Setting cfcRequestEntryStatus to 'active' from any state including 'active' causes the operation to be started. The entry may be modified only when cfcRequestOperationState is 'stopped'. The value of cfcRequestEntryStatus may be set to 'destroy' at any time. Doing so will abort a running request. Entries may not be created without explicitly setting cfcRequestEntryStatus to either 'createAndGo' or 'createAndWait'." INDEX { cfcRequestIndex } ::= { cfcRequestTable 1 } CfcRequestEntry ::= SEQUENCE { cfcRequestIndex Gauge, cfcRequestOperation INTEGER, cfcRequestLocalFile DisplayString, cfcRequestRemoteFile DisplayString, cfcRequestServer DisplayString, cfcRequestUser DisplayString, cfcRequestPassword DisplayString, cfcRequestResult INTEGER, cfcRequestCompletionTime TimeStamp, cfcRequestStop INTEGER, cfcRequestOperationState INTEGER, cfcRequestEntryStatus RowStatus } cfcRequestIndex OBJECT-TYPE SYNTAX Gauge(1..4294967295) ACCESS not-accessible STATUS mandatory DESCRIPTION "An arbitrary integer to uniquely identify this entry. To create an entry a management application should pick a random number." ::= { cfcRequestEntry 1 } cfcRequestOperation OBJECT-TYPE SYNTAX INTEGER { putBinary(1), putASCII(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The FTP operation to be performed." DEFVAL { putBinary } ::= { cfcRequestEntry 2 } cfcRequestLocalFile OBJECT-TYPE SYNTAX DisplayString(SIZE(1..255)) -- Rsyntax OCTET STRING(SIZE(1..255)) ACCESS read-write STATUS mandatory DESCRIPTION "The local file on which the operation is to be performed." ::= { cfcRequestEntry 3 } cfcRequestRemoteFile OBJECT-TYPE SYNTAX DisplayString(SIZE(1..255)) -- Rsyntax OCTET STRING(SIZE(1..255)) ACCESS read-write STATUS mandatory DESCRIPTION "The remote file on which the operation is to be performed." ::= { cfcRequestEntry 4 } cfcRequestServer OBJECT-TYPE SYNTAX DisplayString(SIZE(1..64)) -- Rsyntax OCTET STRING(SIZE(1..64)) ACCESS read-write STATUS mandatory DESCRIPTION "The domain name or IP address of the FTP server to use." ::= { cfcRequestEntry 5 } cfcRequestUser OBJECT-TYPE SYNTAX DisplayString(SIZE(1..32)) -- Rsyntax OCTET STRING(SIZE(1..32)) ACCESS read-write STATUS mandatory DESCRIPTION "The user name to use at the FTP server." ::= { cfcRequestEntry 6 } cfcRequestPassword OBJECT-TYPE SYNTAX DisplayString(SIZE(0..16)) -- Rsyntax OCTET STRING(SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "The password to use at the FTP server. When read this object always returns a zero-length string." DEFVAL { ''H } ::= { cfcRequestEntry 7 } cfcRequestResult OBJECT-TYPE SYNTAX INTEGER { pending(1), success(2), aborted(3), fileOpenFailLocal(4), fileOpenFailRemote(5), badDomainName(6), unreachableIpAddress(7), linkFailed(8), fileReadFailed(9), fileWriteFailed(10) } ACCESS read-only STATUS mandatory DESCRIPTION "The result of the FTP operation." ::= { cfcRequestEntry 8 } cfcRequestCompletionTime OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime when the operation completed. For an incomplete operation this value is zero." ::= { cfcRequestEntry 9 } cfcRequestStop OBJECT-TYPE SYNTAX INTEGER { ready(1), stop(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The action control to stop a running request. Setting this to 'stop' will begin the process of stopping the request. Setting it to 'ready' or setting it to 'stop' more than once have no effect. When read this object always returns ready." ::= { cfcRequestEntry 10 } cfcRequestOperationState OBJECT-TYPE SYNTAX INTEGER { running(1), stopping(2), stopped(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The operational state of the file transfer. To short-terminate the transfer set cfcRequestStop to 'stop'." ::= { cfcRequestEntry 11 } cfcRequestEntryStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "The control that allows modification, creation, and deletion of entries. For detailed rules see the DESCRIPTION for cfcRequestEntry." ::= { cfcRequestEntry 12 } ciscoFtpClientRequestGroup OBJECT IDENTIFIER ::= { ciscoFtpClientMIBGroups 1 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- FTP client request management. -- objects -- cfcRequestMaximum, cfcRequests, cfcRequestsHigh, -- cfcRequestsBumped, cfcRequestOperation, cfcRequestLocalFile, -- cfcRequestRemoteFile, cfcRequestServer, cfcRequestUser, -- cfcRequestPassword, cfcRequestResult, -- cfcRequestCompletionTime, cfcRequestStop, -- cfcRequestOperationState, cfcRequestEntryStatus ciscoFtpClientMIBCompliance OBJECT IDENTIFIER ::= { ciscoFtpClientMIBCompliances 1 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- The compliance statement for entities which implement -- the Cisco FTP Client MIB. Implementation of this MIB -- is based on individual product needs. -- Module -- >>current<< -- MandGroup -- ciscoFtpClientRequestGroup END