-- MIB created 8/30/100 21:10:09, by -- SMIC (the next generation) version 1.6.29, November 22, 1994. CISCO-IPSEC-MIB DEFINITIONS ::= BEGIN -- From file: "CISCO-IPSEC-MIB.my" IMPORTS Counter32, Gauge32, Integer32 FROM SNMPv2-SMI-v1 OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215 DisplayString, TruthValue FROM SNMPv2-TC-v1 ifIndex FROM IF-MIB ciscoExperiment FROM CISCO-SMI; ciscoIPsecMIB OBJECT IDENTIFIER ::= { ciscoExperiment 62 } -- MODULE-IDENTITY -- LastUpdated -- 200008071139Z -- OrgName -- Cisco Systems, Inc. -- ContactInfo -- Cisco Systems -- Enterprise Business Management Unit -- -- Postal: 170 W Tasman Drive -- San Jose, CA 95134 -- USA -- -- Tel: +1 800 553-NETS -- -- E-mail: cs-ipsecurity@cisco.com -- Descr -- The MIB module for modeling Cisco-specific -- IPsec attributes -- -- Overview of Cisco IPsec MIB -- -- MIB description -- -- This MIB models the Cisco implementation-specific -- attributes of a Cisco entity that implements IPsec. -- This MIB is complementary to the standard IPsec MIB -- proposed jointly by Tivoli and Cisco. -- -- The ciscoIPsec MIB provides the operational information -- on Cisco's IPsec tunnelling implementation. -- The following entities are managed: -- 1) ISAKMP Group: -- a) ISAKMP global parameters -- b) ISAKMP Policy Table -- -- 2) IPSec Group: -- a) IPSec Global Parameters -- b) IPSec Global Traffic Parameters -- c) Cryptomap Group -- - Cryptomap Set Table -- - Cryptomap Table -- - CryptomapSet Binding Table -- -- 3) System Capacity & Capability Group: -- a) Capacity Parameters -- b) Capability Parameters -- -- 4) Trap Control Group -- 5) Notifications Group ciscoIPsecMIBObjects OBJECT IDENTIFIER ::= { ciscoIPsecMIB 1 } ciscoIPsecMIBNotificationPrefix OBJECT IDENTIFIER ::= { ciscoIPsecMIB 2 } ciscoIPsecMIBConformance OBJECT IDENTIFIER ::= { ciscoIPsecMIB 3 } cipsIsakmpGroup OBJECT IDENTIFIER ::= { ciscoIPsecMIBObjects 1 } cipsIPsecGroup OBJECT IDENTIFIER ::= { ciscoIPsecMIBObjects 2 } cipsIPsecGlobals OBJECT IDENTIFIER ::= { cipsIPsecGroup 1 } cipsIPsecStatistics OBJECT IDENTIFIER ::= { cipsIPsecGroup 2 } cipsCryptomapGroup OBJECT IDENTIFIER ::= { cipsIPsecGroup 3 } cipsSysCapacityGroup OBJECT IDENTIFIER ::= { ciscoIPsecMIBObjects 3 } cipsTrapCntlGroup OBJECT IDENTIFIER ::= { ciscoIPsecMIBObjects 4 } cipsMIBNotifications OBJECT IDENTIFIER ::= { ciscoIPsecMIBNotificationPrefix 0 } cipsMIBConformances OBJECT IDENTIFIER ::= { ciscoIPsecMIBConformance 1 } cipsMIBGroups OBJECT IDENTIFIER ::= { ciscoIPsecMIBConformance 2 } CIPsecLifetime ::= Gauge32(120..86400) -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- Value in units of seconds CIPsecLifesize ::= Gauge32(2560..536870912) -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- Value in units of kilobytes CIPsecNumCryptoMaps ::= Gauge32(0..2147483647) -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- Integral units representing count of cryptomaps CryptomapType ::= INTEGER { -- cryptomapTypeNONE(0), cryptomapTypeMANUAL(1), cryptomapTypeISAKMP(2), cryptomapTypeCET(3), cryptomapTypeDYNAMIC(4), cryptomapTypeDYNAMICDISCOVERY(5) } -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- The type of a cryptomap entry. Cryptomap -- is a unit of IOS IPSec policy specification. CryptomapSetBindStatus ::= INTEGER { -- unknown(0), attached(1), detached(2) } -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- The status of the binding of a cryptomap set -- to the specified interface. The value qhen queried -- is always 'attached'. When set to 'detached', the -- cryptomap set if detached from the specified interface. -- Setting the value to 'attached' will result in -- SNMP General Error. IPSIpAddress ::= OCTET STRING(SIZE(4 | 16)) -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- An IP V4 or V6 Address. IkeHashAlgo ::= INTEGER { none(1), md5(2), sha(3) } -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- The hash algorithm used in IPsec Phase-1 -- IKE negotiations. IkeAuthMethod ::= INTEGER { none(1), preSharedKey(2), rsaSig(3), rsaEncrypt(4), revPublicKey(5) } -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- The authentication method used in IPsec Phase-1 IKE -- negotiations. IkeIdentityType ::= INTEGER { -- isakmpIdTypeUNKNOWN(0), isakmpIdTypeADDRESS(1), isakmpIdTypeHOSTNAME(2) } -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- The type of identity used by the local entity to -- identity itself to the peer with which it performs -- IPSec Main Mode negotiations. This type decides the -- content of the Identification payload in the -- Main Mode of IPSec tunnel setup. DiffHellmanGrp ::= INTEGER { none(1), dhGroup1(2), dhGroup2(3) } -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- The Diffie Hellman Group used in negotiations. EncryptAlgo ::= INTEGER { none(1), des(2), des3(3) } -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- The encryption algorithm used in negotiations. TrapStatus ::= INTEGER { enabled(1), disabled(2) } -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- The administrative status for sending a TRAP. cipsIsakmpEnabled OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object is TRUE if ISAKMP has been enabled on the managed entity. Otherise the value of this object is FALSE." ::= { cipsIsakmpGroup 1 } cipsIsakmpIdentity OBJECT-TYPE SYNTAX IkeIdentityType -- Rsyntax INTEGER { -- isakmpIdTypeUNKNOWN(0), -- isakmpIdTypeADDRESS(1), -- isakmpIdTypeHOSTNAME(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object is shows the type of identity used by the managed entity in ISAKMP negotiations with another peer." ::= { cipsIsakmpGroup 2 } cipsIsakmpKeepaliveInterval OBJECT-TYPE SYNTAX Integer32(10..3600) -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object is time interval in seconds between successive ISAKMP keepalive heartbeats issued to the peers to which IKE tunnels have been setup." ::= { cipsIsakmpGroup 3 } cipsNumIsakmpPolicies OBJECT-TYPE SYNTAX Integer32(1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object is the number of ISAKMP policies that have been configured on the managed entity." ::= { cipsIsakmpGroup 4 } cipsIsakmpPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF CipsIsakmpPolicyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table containing the list of all ISAKMP policy entries configured by the operator." ::= { cipsIsakmpGroup 5 } cipsIsakmpPolicyEntry OBJECT-TYPE SYNTAX CipsIsakmpPolicyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains the attributes associated with a single ISAKMP Policy entry." INDEX { cipsIsakmpPolPriority } ::= { cipsIsakmpPolicyTable 1 } CipsIsakmpPolicyEntry ::= SEQUENCE { cipsIsakmpPolPriority Integer32, cipsIsakmpPolEncr EncryptAlgo, cipsIsakmpPolHash IkeHashAlgo, cipsIsakmpPolAuth IkeAuthMethod, cipsIsakmpPolGroup DiffHellmanGrp, cipsIsakmpPolLifetime Integer32 } cipsIsakmpPolPriority OBJECT-TYPE SYNTAX Integer32(0..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "The priotity of this ISAKMP Policy entry. This is also the index of this table." ::= { cipsIsakmpPolicyEntry 1 } cipsIsakmpPolEncr OBJECT-TYPE SYNTAX EncryptAlgo -- Rsyntax INTEGER { -- none(1), -- des(2), -- des3(3) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The encryption transform specified by this ISAKMP policy specification. The Internet Key Exchange (IKE) tunnels setup using this policy item would use the specified encryption transform to protect the ISAKMP PDUs." ::= { cipsIsakmpPolicyEntry 2 } cipsIsakmpPolHash OBJECT-TYPE SYNTAX IkeHashAlgo -- Rsyntax INTEGER { -- none(1), -- md5(2), -- sha(3) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The hash transform specified by this ISAKMP policy specification. The IKE tunnels setup using this policy item would use the specified hash transform to protect the ISAKMP PDUs." ::= { cipsIsakmpPolicyEntry 3 } cipsIsakmpPolAuth OBJECT-TYPE SYNTAX IkeAuthMethod -- Rsyntax INTEGER { -- none(1), -- preSharedKey(2), -- rsaSig(3), -- rsaEncrypt(4), -- revPublicKey(5) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The peer authentication mthod specified by this ISAKMP policy specification. If this policy entity is selected for negotiation with a peer, the local entity would authenticate the peer using the method specified by this object." ::= { cipsIsakmpPolicyEntry 4 } cipsIsakmpPolGroup OBJECT-TYPE SYNTAX DiffHellmanGrp -- Rsyntax INTEGER { -- none(1), -- dhGroup1(2), -- dhGroup2(3) -- } ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies the Oakley group used for Diffie Hellman exchange in the Main Mode. If this policy item is selected to negotiate Main Mode with an IKE peer, the local entity chooses the group specified by this object to perform Diffie Hellman exchange with the peer." ::= { cipsIsakmpPolicyEntry 5 } cipsIsakmpPolLifetime OBJECT-TYPE SYNTAX Integer32(60..86400) -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies the lifetime in seconds of the IKE tunnels generated using this policy specification." ::= { cipsIsakmpPolicyEntry 6 } cipsSALifetime OBJECT-TYPE SYNTAX CIPsecLifetime -- Rsyntax Gauge32(120..86400) -- Units -- Seconds ACCESS read-only STATUS mandatory DESCRIPTION "The default lifetime (in seconds) assigned to an SA as a global policy (maybe overridden in specific cryptomap definitions)." ::= { cipsIPsecGlobals 1 } cipsSALifesize OBJECT-TYPE SYNTAX CIPsecLifesize -- Rsyntax Gauge32(2560..536870912) -- Units -- KBytes ACCESS read-only STATUS mandatory DESCRIPTION "The default lifesize in KBytes assigned to an SA as a global policy (unless overridden in cryptomap definition)" ::= { cipsIPsecGlobals 2 } cipsNumStaticCryptomapSets OBJECT-TYPE SYNTAX CIPsecNumCryptoMaps -- Rsyntax Gauge32(0..2147483647) -- Units -- Integral Units ACCESS read-only STATUS mandatory DESCRIPTION "The number of Cryptomap Sets that are are fully configured. Statically defined cryptomap sets are ones where the operator has fully specified all the parameters required set up IPSec Virtual Private Networks (VPNs)." ::= { cipsIPsecGlobals 3 } cipsNumCETCryptomapSets OBJECT-TYPE SYNTAX CIPsecNumCryptoMaps -- Rsyntax Gauge32(0..2147483647) -- Units -- Integral Units ACCESS read-only STATUS mandatory DESCRIPTION "The number of static Cryptomap Sets that have at least one CET cryptomap element as a member of the set." ::= { cipsIPsecGlobals 4 } cipsNumDynamicCryptomapSets OBJECT-TYPE SYNTAX CIPsecNumCryptoMaps -- Rsyntax Gauge32(0..2147483647) -- Units -- Integral Units ACCESS read-only STATUS mandatory DESCRIPTION "The number of dynamic IPSec Policy templates (called 'dynamic cryptomap templates') configured on the managed entity." ::= { cipsIPsecGlobals 5 } cipsNumTEDCryptomapSets OBJECT-TYPE SYNTAX CIPsecNumCryptoMaps -- Rsyntax Gauge32(0..2147483647) -- Units -- Integral Units ACCESS read-only STATUS mandatory DESCRIPTION "The number of static Cryptomap Sets that have at least one dynamic cryptomap template bound to them which has the Tunnel Endpoint Discovery (TED) enabled." ::= { cipsIPsecGlobals 6 } cipsNumTEDProbesReceived OBJECT-TYPE SYNTAX Counter32 -- Units -- Integral Units ACCESS read-only STATUS mandatory DESCRIPTION "The number of TED probes that were received by this managed entity since bootup. Not affected by any CLI operation." ::= { cipsIPsecStatistics 1 } cipsNumTEDProbesSent OBJECT-TYPE SYNTAX Counter32 -- Units -- Integral Units ACCESS read-only STATUS mandatory DESCRIPTION "The number of TED probes that were dispatched by all the dynamic cryptomaps in this managed entity since bootup. Not affected by any CLI operation." ::= { cipsIPsecStatistics 2 } cipsNumTEDFailures OBJECT-TYPE SYNTAX Counter32 -- Units -- Integral Units ACCESS read-only STATUS mandatory DESCRIPTION "The number of TED probes that were dispatched by the local entity and that failed to locate crypto endpoint. Not affected by any CLI operation." ::= { cipsIPsecStatistics 3 } cipsMaxSAs OBJECT-TYPE SYNTAX INTEGER(0..65535) -- Units -- Integral Units ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of IPsec Security Associations that can be established on this managed entity. If no theoretical limit exists, this returns value 0. Not affected by any CLI operation." ::= { cipsSysCapacityGroup 1 } cips3DesCapable OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object is TRUE if the managed entity has the hardware nad software features to support 3DES encryption algorithm. Not affected by any CLI operation." ::= { cipsSysCapacityGroup 2 } cipsStaticCryptomapSetTable OBJECT-TYPE SYNTAX SEQUENCE OF CipsStaticCryptomapSetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table containing the list of all cryptomap sets that are fully specified and are not wild-carded. The operator may include different types of cryptomaps in such a set - manual, CET, ISAKMP or dynamic." ::= { cipsCryptomapGroup 1 } cipsStaticCryptomapSetEntry OBJECT-TYPE SYNTAX CipsStaticCryptomapSetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains the attributes associated with a single static cryptomap set." INDEX { cipsStaticCryptomapSetName } ::= { cipsStaticCryptomapSetTable 1 } CipsStaticCryptomapSetEntry ::= SEQUENCE { cipsStaticCryptomapSetName DisplayString, cipsStaticCryptomapSetSize Gauge32, cipsStaticCryptomapSetNumIsakmp Gauge32, cipsStaticCryptomapSetNumManual Gauge32, cipsStaticCryptomapSetNumCET Gauge32, cipsStaticCryptomapSetNumDynamic Gauge32, cipsStaticCryptomapSetNumDisc Gauge32, cipsStaticCryptomapSetNumSAs Gauge32 } cipsStaticCryptomapSetName OBJECT-TYPE SYNTAX DisplayString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS not-accessible STATUS mandatory DESCRIPTION "The index of the static cryptomap table. The value of the string is the name string assigned by the operator in defining the cryptomap set." ::= { cipsStaticCryptomapSetEntry 1 } cipsStaticCryptomapSetSize OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The total number of cryptomap entries contained in this cryptomap set. " ::= { cipsStaticCryptomapSetEntry 2 } cipsStaticCryptomapSetNumIsakmp OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of cryptomaps associated with this cryptomap set that use ISAKMP protocol to do key exchange." ::= { cipsStaticCryptomapSetEntry 3 } cipsStaticCryptomapSetNumManual OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of cryptomaps associated with this cryptomap set that require the operator to manually setup the keys and SPIs." ::= { cipsStaticCryptomapSetEntry 4 } cipsStaticCryptomapSetNumCET OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of cryptomaps of type 'ipsec-cisco' associated with this cryptomap set. Such cryptomap elements implement Cisco Encryption Technology based Virtual Private Networks." ::= { cipsStaticCryptomapSetEntry 5 } cipsStaticCryptomapSetNumDynamic OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of dynamic cryptomap templates linked to this cryptomap set." ::= { cipsStaticCryptomapSetEntry 6 } cipsStaticCryptomapSetNumDisc OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of dynamic cryptomap templates linked to this cryptomap set that have Tunnel Endpoint Discovery (TED) enabled." ::= { cipsStaticCryptomapSetEntry 7 } cipsStaticCryptomapSetNumSAs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of and IPsec Security Associations that are active and were setup using this cryptomap. " ::= { cipsStaticCryptomapSetEntry 8 } cipsDynamicCryptomapSetTable OBJECT-TYPE SYNTAX SEQUENCE OF CipsDynamicCryptomapSetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table containing the list of all dynamic cryptomaps that use IKE, defined on the managed entity." ::= { cipsCryptomapGroup 2 } cipsDynamicCryptomapSetEntry OBJECT-TYPE SYNTAX CipsDynamicCryptomapSetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains the attributes associated with a single dynamic cryptomap template." INDEX { cipsDynamicCryptomapSetName } ::= { cipsDynamicCryptomapSetTable 1 } CipsDynamicCryptomapSetEntry ::= SEQUENCE { cipsDynamicCryptomapSetName DisplayString, cipsDynamicCryptomapSetSize Gauge32, cipsDynamicCryptomapSetNumAssoc Gauge32 } cipsDynamicCryptomapSetName OBJECT-TYPE SYNTAX DisplayString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS not-accessible STATUS mandatory DESCRIPTION "The index of the dynamic cryptomap table. The value of the string is the one assigned by the operator in defining the cryptomap set." ::= { cipsDynamicCryptomapSetEntry 1 } cipsDynamicCryptomapSetSize OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of cryptomap entries in this cryptomap." ::= { cipsDynamicCryptomapSetEntry 2 } cipsDynamicCryptomapSetNumAssoc OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of static cryptomap sets with which this dynamic cryptomap is associated. " ::= { cipsDynamicCryptomapSetEntry 3 } cipsStaticCryptomapTable OBJECT-TYPE SYNTAX SEQUENCE OF CipsStaticCryptomapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table ilisting the member cryptomaps of the cryptomap sets that are configured on the managed entity." ::= { cipsCryptomapGroup 3 } cipsStaticCryptomapEntry OBJECT-TYPE SYNTAX CipsStaticCryptomapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains the attributes associated with a single static (fully specified) cryptomap entry. This table does not include the members of dynamic cryptomap sets that may be linked with the parent static cryptomap set." INDEX { cipsStaticCryptomapSetName, cipsStaticCryptomapPriority } ::= { cipsStaticCryptomapTable 1 } CipsStaticCryptomapEntry ::= SEQUENCE { cipsStaticCryptomapPriority Integer32, cipsStaticCryptomapType CryptomapType, cipsStaticCryptomapDescr DisplayString, cipsStaticCryptomapPeer IPSIpAddress, cipsStaticCryptomapNumPeers Integer32, cipsStaticCryptomapPfs DiffHellmanGrp, cipsStaticCryptomapLifetime Integer32, cipsStaticCryptomapLifesize Integer32, cipsStaticCryptomapLevelHost TruthValue } cipsStaticCryptomapPriority OBJECT-TYPE SYNTAX Integer32(0..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "The priority of the cryptomap entry in the cryptomap set. This is the second index component of this table." ::= { cipsStaticCryptomapEntry 1 } cipsStaticCryptomapType OBJECT-TYPE SYNTAX CryptomapType -- Rsyntax INTEGER { -- cryptomapTypeNONE(0), -- cryptomapTypeMANUAL(1), -- cryptomapTypeISAKMP(2), -- cryptomapTypeCET(3), -- cryptomapTypeDYNAMIC(4), -- cryptomapTypeDYNAMICDISCOVERY(5) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The type of the cryptomap entry. This can be an ISAKMP cryptomap, CET or manual. Dynamic cryptomaps are not counted in this table." ::= { cipsStaticCryptomapEntry 2 } cipsStaticCryptomapDescr OBJECT-TYPE SYNTAX DisplayString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The description string entered by the operatoir while creating this cryptomap. The string generally identifies a description and the purpose of this policy." ::= { cipsStaticCryptomapEntry 3 } cipsStaticCryptomapPeer OBJECT-TYPE SYNTAX IPSIpAddress -- Rsyntax OCTET STRING(SIZE(4 | 16)) ACCESS read-only STATUS mandatory DESCRIPTION "The IP address of the current peer associated with this IPSec policy item. Traffic that is protected by this cryptomap is protected by a tunnel that terminates at the device whose IP address is specified by this object." ::= { cipsStaticCryptomapEntry 4 } cipsStaticCryptomapNumPeers OBJECT-TYPE SYNTAX Integer32(0..40) ACCESS read-only STATUS mandatory DESCRIPTION "The number of peers associated with this cryptomap entry. The peers other than the one identified by 'cipsStaticCryptomapPeer' are backup peers. Manual cryptomaps may have only one peer." ::= { cipsStaticCryptomapEntry 5 } cipsStaticCryptomapPfs OBJECT-TYPE SYNTAX DiffHellmanGrp -- Rsyntax INTEGER { -- none(1), -- dhGroup1(2), -- dhGroup2(3) -- } ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies if the tunnels instantiated due to this policy item should use Perfect Forward Secrecy (PFS) and if so, what group of Oakley they should use." ::= { cipsStaticCryptomapEntry 6 } cipsStaticCryptomapLifetime OBJECT-TYPE SYNTAX Integer32(0 | 120..86400) ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the lifetime of the IPSec Security Associations (SA) created using this IPSec policy entry. If this value is zero, the lifetime assumes the value specified by the global lifetime parameter." ::= { cipsStaticCryptomapEntry 7 } cipsStaticCryptomapLifesize OBJECT-TYPE SYNTAX Integer32(0 | 2560..536870912) ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the lifesize (maximum traffic in bytes that may be carried) of the IPSec SAs created using this IPSec policy entry. If this value is zero, the lifetime assumes the value specified by the global lifesize parameter." ::= { cipsStaticCryptomapEntry 8 } cipsStaticCryptomapLevelHost OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the granularity of the IPSec SAs created using this IPSec policy entry. If this value is TRUE, distinct SA bundles are created for distinct hosts at the end of the application traffic." ::= { cipsStaticCryptomapEntry 9 } cipsCryptomapSetIfTable OBJECT-TYPE SYNTAX SEQUENCE OF CipsCryptomapSetIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table lists the binding of cryptomap sets to the interfaces of the managed entity." ::= { cipsCryptomapGroup 4 } cipsCryptomapSetIfEntry OBJECT-TYPE SYNTAX CipsCryptomapSetIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains the record of the association between an interface and a cryptomap set (static) that is defined on the managed entity. Note that the cryptomap set identified in this binding must static. Dynamic cryptomaps cannot be bound to interfaces." INDEX { ifIndex, cipsStaticCryptomapSetName } ::= { cipsCryptomapSetIfTable 1 } CipsCryptomapSetIfEntry ::= SEQUENCE { cipsCryptomapSetIfVirtual TruthValue, cipsCryptomapSetIfStatus CryptomapSetBindStatus } cipsCryptomapSetIfVirtual OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object identifies if the interface to which the cryptomap set is attached is a tunnel (such as a GRE or PPTP tunnel)." ::= { cipsCryptomapSetIfEntry 1 } cipsCryptomapSetIfStatus OBJECT-TYPE SYNTAX CryptomapSetBindStatus -- Rsyntax INTEGER { -- unknown(0), -- attached(1), -- detached(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object identifies the status of the binding of the specified cryptomap set with the specified interface. The value when queried is always 'attached'. When set to 'detached', the cryptomap set if detached from the specified interface. The effect of this is same as the CLI command config-if# no crypto map cryptomapSetName Setting the value to 'attached' will result in SNMP General Error." ::= { cipsCryptomapSetIfEntry 2 } cipsCntlIsakmpPolicyAdded OBJECT-TYPE SYNTAX TrapStatus -- Rsyntax INTEGER { -- enabled(1), -- disabled(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object defines the administrative state of sending the IOS IPsec ISAKMP Policy Add trap." DEFVAL { disabled } ::= { cipsTrapCntlGroup 1 } cipsCntlIsakmpPolicyDeleted OBJECT-TYPE SYNTAX TrapStatus -- Rsyntax INTEGER { -- enabled(1), -- disabled(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object defines the administrative state of sending the IOS IPsec ISAKMP Policy Delete trap." DEFVAL { disabled } ::= { cipsTrapCntlGroup 2 } cipsCntlCryptomapAdded OBJECT-TYPE SYNTAX TrapStatus -- Rsyntax INTEGER { -- enabled(1), -- disabled(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object defines the administrative state of sending the IOS IPsec Cryptomap Add trap." DEFVAL { disabled } ::= { cipsTrapCntlGroup 3 } cipsCntlCryptomapDeleted OBJECT-TYPE SYNTAX TrapStatus -- Rsyntax INTEGER { -- enabled(1), -- disabled(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object defines the administrative state of sending the IOS IPsec Cryptomap Delete trap." DEFVAL { disabled } ::= { cipsTrapCntlGroup 4 } cipsCntlCryptomapSetAttached OBJECT-TYPE SYNTAX TrapStatus -- Rsyntax INTEGER { -- enabled(1), -- disabled(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object defines the administrative state of sending the IOS IPsec trap that is issued when a cryptomap set is attached to an interface." DEFVAL { disabled } ::= { cipsTrapCntlGroup 5 } cipsCntlCryptomapSetDetached OBJECT-TYPE SYNTAX TrapStatus -- Rsyntax INTEGER { -- enabled(1), -- disabled(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object defines the administrative state of sending the IOS IPsec trap that is issued when a cryptomap set is detached from an interface. to which it was earlier bound." DEFVAL { disabled } ::= { cipsTrapCntlGroup 6 } cipsCntlTooManySAs OBJECT-TYPE SYNTAX TrapStatus -- Rsyntax INTEGER { -- enabled(1), -- disabled(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object defines the administrative state of sending the IOS IPsec trap that is issued when the number of SAs crosses the maximum number of SAs that may be supported on the managed entity." DEFVAL { disabled } ::= { cipsTrapCntlGroup 7 } cipsIsakmpPolicyAdded TRAP-TYPE -- Reverse mappable trap ENTERPRISE ciscoIPsecMIBNotificationPrefix VARIABLES { cipsNumIsakmpPolicies } -- Status -- mandatory DESCRIPTION "This trap is generated when a new ISAKMP policy element is defined on the managed entity. The context of the event includes the updated number of ISAKMP policy elements currently available." ::= 1 cipsIsakmpPolicyDeleted TRAP-TYPE -- Reverse mappable trap ENTERPRISE ciscoIPsecMIBNotificationPrefix VARIABLES { cipsNumIsakmpPolicies } -- Status -- mandatory DESCRIPTION "This trap is generated when an existing ISAKMP policy element is deleted on the managed entity. The context of the event includes the updated number of ISAKMP policy elements currently available." ::= 2 cipsCryptomapAdded TRAP-TYPE -- Reverse mappable trap ENTERPRISE ciscoIPsecMIBNotificationPrefix VARIABLES { cipsStaticCryptomapType, cipsStaticCryptomapSetSize } -- Status -- mandatory DESCRIPTION "This trap is generated when a new cryptomap is added to the specified cryptomap set." ::= 3 cipsCryptomapDeleted TRAP-TYPE -- Reverse mappable trap ENTERPRISE ciscoIPsecMIBNotificationPrefix VARIABLES { cipsStaticCryptomapSetSize } -- Status -- mandatory DESCRIPTION "This trap is generated when a cryptomap is removed from the specified cryptomap set." ::= 4 cipsCryptomapSetAttached TRAP-TYPE -- Reverse mappable trap ENTERPRISE ciscoIPsecMIBNotificationPrefix VARIABLES { cipsStaticCryptomapSetSize, cipsStaticCryptomapSetNumIsakmp, cipsStaticCryptomapSetNumDynamic } -- Status -- mandatory DESCRIPTION "A cryptomap set must be attached to an interface of the device in order for it to be operational. This trap is generated when the cryptomap set attached to an active interface of the managed entity. The context of the notification includes: Size of the attached cryptomap set, Number of ISAKMP cryptomaps in the set and Number of Dynamic cryptomaps in the set." ::= 5 cipsCryptomapSetDetached TRAP-TYPE -- Reverse mappable trap ENTERPRISE ciscoIPsecMIBNotificationPrefix VARIABLES { cipsStaticCryptomapSetSize } -- Status -- mandatory DESCRIPTION "This trap is generated when a cryptomap set is detached from an interafce to which it was bound earlier. The context of the event identifies the size of the cryptomap set." ::= 6 cipsTooManySAs TRAP-TYPE -- Reverse mappable trap ENTERPRISE ciscoIPsecMIBNotificationPrefix VARIABLES { cipsMaxSAs } -- Status -- mandatory DESCRIPTION "This trap is generated when a new SA is attempted to be setup while the number of currently active SAs equals the maximum configurable. The variables are: cipsMaxSAs" ::= 7 cipsMIBConfIsakmpGroup OBJECT IDENTIFIER ::= { cipsMIBGroups 1 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing Global -- ISAKMP policy monitoring capability to a -- Cisco IPsec capable VPN router. -- objects -- cipsIsakmpEnabled, cipsIsakmpIdentity, -- cipsIsakmpKeepaliveInterval, cipsNumIsakmpPolicies cipsMIBConfIPSecGlobalsGroup OBJECT IDENTIFIER ::= { cipsMIBGroups 2 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing Global -- IPSec policy monitoring capability to a -- Cisco IPsec capable VPN router. -- objects -- cipsSALifetime, cipsSALifesize cipsMIBConfCapacityGroup OBJECT IDENTIFIER ::= { cipsMIBGroups 3 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing IPsec -- System Capacity monitoring capability to -- a Cisco IPsec capable VPN router. -- objects -- cipsMaxSAs, cips3DesCapable cipsMIBStaticCryptomapGroup OBJECT IDENTIFIER ::= { cipsMIBGroups 4 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects instrumenting -- the properties of the Static (fully specified) -- Cryptomap Sets on an IPsec-capable -- IOS router. -- objects -- cipsStaticCryptomapSetSize, cipsStaticCryptomapSetNumIsakmp, -- cipsStaticCryptomapSetNumCET, cipsStaticCryptomapSetNumSAs cipsMIBManualCryptomapGroup OBJECT IDENTIFIER ::= { cipsMIBGroups 5 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects instrumenting -- the properties of the Manual Cryptomap entries -- on a Cisco IPsec capable IOS router. -- objects -- cipsStaticCryptomapSetNumManual cipsMIBDynamicCryptomapGroup OBJECT IDENTIFIER ::= { cipsMIBGroups 6 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects instrumenting -- the properties of the Dynamic Cryptomap group -- on a Cisco IPsec capable IOS router. -- objects -- cipsNumTEDProbesReceived, cipsNumTEDProbesSent, -- cipsNumTEDFailures, cipsStaticCryptomapSetNumDynamic, -- cipsStaticCryptomapSetNumDisc, cipsNumTEDCryptomapSets, -- cipsDynamicCryptomapSetSize, cipsDynamicCryptomapSetNumAssoc cipsMIBMandatoryNotifCntlGroup OBJECT IDENTIFIER ::= { cipsMIBGroups 7 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing IPsec -- Notification capability to a IPsec-capable -- IOS router. It is mandatory to implement -- this set of objects pertaining to -- IOS notifications about IPSec activity. -- objects -- cipsCntlIsakmpPolicyAdded, cipsCntlIsakmpPolicyDeleted, -- cipsCntlCryptomapAdded, cipsCntlCryptomapDeleted, -- cipsCntlCryptomapSetAttached, cipsCntlCryptomapSetDetached, -- cipsCntlTooManySAs cipsMIBCompliance OBJECT IDENTIFIER ::= { cipsMIBConformances 1 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- The compliance statement for entities which -- implement the Cisco IPsec MIB -- Module -- >>current<< -- MandGroup -- cipsMIBConfIsakmpGroup -- MandGroup -- cipsMIBConfIPSecGlobalsGroup -- MandGroup -- cipsMIBConfCapacityGroup -- MandGroup -- cipsMIBStaticCryptomapGroup -- MandGroup -- cipsMIBMandatoryNotifCntlGroup -- ObjVar -- cipsCntlIsakmpPolicyAdded -- ObjVar -- cipsCntlIsakmpPolicyDeleted -- ObjVar -- cipsCntlCryptomapAdded -- ObjVar -- cipsCntlCryptomapDeleted -- ObjVar -- cipsCntlCryptomapSetAttached -- ObjVar -- cipsCntlCryptomapSetDetached -- ObjVar -- cipsCntlTooManySAs END