-- MIB file created 22-Oct-2003 15:49:32, by -- SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com CISCO-L2-DEV-MONITORING-MIB DEFINITIONS ::= BEGIN -- From file: "CISCO-L2-DEV-MONITORING-MIB.my" -- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T" IMPORTS MacAddress, TruthValue, RowStatus FROM SNMPv2-TC-v1 InterfaceIndex FROM IF-MIB ciscoMgmt FROM CISCO-SMI Gauge FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215; ciscoL2DevMonMIB OBJECT IDENTIFIER ::= { ciscoMgmt 271 } -- MODULE-IDENTITY -- LastUpdated -- 200307220000Z -- OrgName -- Cisco System Inc. -- ContactInfo -- Cisco Systems -- Customer Service -- -- Postal: 170 West Tasman Drive, -- San Jose CA 95134-1706. -- USA -- -- Tel: +1 800 553-NETS -- -- E-mail: cs-snmp@cisco.com -- Descr -- This MIB module is for monitoring of active -- layer 2 devices by hot standby layer 2 devices -- and the configuration of hot standby switch-over -- parameters. -- RevDate -- 200307220000Z -- RevDescr -- Added cl2DevMonActiveRadioMacType to identify -- to the device radio MAC protocol type and -- cl2DevMonActiveLocalRadioIndex to identify -- the local radio used for monitoring. -- RevDate -- 200109270000Z -- RevDescr -- Initial version of this MIB module. ciscoL2DevMonMIBObjects OBJECT IDENTIFIER ::= { ciscoL2DevMonMIB 1 } cl2DevMonConfig OBJECT IDENTIFIER ::= { ciscoL2DevMonMIBObjects 1 } ciscoL2DevMonMIBNotifications OBJECT IDENTIFIER ::= { ciscoL2DevMonMIB 0 } ciscoL2DevMonMIBConformance OBJECT IDENTIFIER ::= { ciscoL2DevMonMIB 2 } ciscoL2DevMonMIBCompliances OBJECT IDENTIFIER ::= { ciscoL2DevMonMIBConformance 1 } ciscoL2DevMonMIBGroups OBJECT IDENTIFIER ::= { ciscoL2DevMonMIBConformance 2 } cl2DevMonInStandbyMode OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "If the value of this variable is TRUE, this device is in monitoring or standby mode and it will poll for the health of the devices on the cl2DevMonActiveTable. If the value of cl2DevMonInStandbyMode is FALSE, it only can be set back to TRUE using command line interface or SNMP request. The value can be set to FALSE only by the device itself because force switch over from standby mode to active mode is not allowed." DEFVAL { false } ::= { cl2DevMonConfig 1 } cl2DevMonNotifEnabled OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether cl2DevMonSwitchover notifications will or will not be sent by the device when it changes its cl2DevMonInStandbyMode to FALSE and becomes an active unit." DEFVAL { false } ::= { cl2DevMonConfig 2 } cl2DevMonActiveTable OBJECT-TYPE SYNTAX SEQUENCE OF Cl2DevMonActiveEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table for active devices on the network being monitored by the hot standby monitoring unit. This table is on the hot standby monitoring unit. All entries on this table will only be added, deleted, modified using command user interface or SNMP request." ::= { cl2DevMonConfig 3 } cl2DevMonActiveEntry OBJECT-TYPE SYNTAX Cl2DevMonActiveEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the cl2DevMonActiveTable table." INDEX { cl2DevMonActiveMacAddress } ::= { cl2DevMonActiveTable 1 } Cl2DevMonActiveEntry ::= SEQUENCE { cl2DevMonActiveMacAddress MacAddress, cl2DevMonActivePollingFrequency Gauge, cl2DevMonActivePollingTimeOut Gauge, cl2DevMonActiveRowStatus RowStatus, cl2DevMonActiveRadioMacType INTEGER, cl2DevMonActiveLocalRadioIndex InterfaceIndex } cl2DevMonActiveMacAddress OBJECT-TYPE SYNTAX MacAddress -- Rsyntax OCTET STRING(SIZE(6)) ACCESS not-accessible STATUS mandatory DESCRIPTION "Mac address of the active unit to be monitored by this hot standby monitoring unit." ::= { cl2DevMonActiveEntry 1 } cl2DevMonActivePollingFrequency OBJECT-TYPE SYNTAX Gauge(1..30) -- Units -- seconds ACCESS read-write STATUS mandatory DESCRIPTION "The frequency, in seconds, the active unit specified by cl2DevMonActiveMacAddress is polled for its health." DEFVAL { 5 } ::= { cl2DevMonActiveEntry 2 } cl2DevMonActivePollingTimeOut OBJECT-TYPE SYNTAX Gauge(1..600) -- Units -- seconds ACCESS read-write STATUS mandatory DESCRIPTION "The total time, in seconds, the standby monitoring unit can tolerate the failure of polling of the active unit. After this duration, one more failure of the polling will trigger this hot standby monitoring unit to take over and become an active unit. It then will stop monitoring other active units and set value of cl2DevMonInStandbyMode to FALSE." DEFVAL { 5 } ::= { cl2DevMonActiveEntry 3 } cl2DevMonActiveRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "The status column used for creating, modifying, and deleting instances of the columnar objects in the cl2DevMonActiveTable table. Creation of rows must be done via 'createAndGo' and all columns are mandatory. This object will become 'active' if the NMS performs a multivarbind set including this object. Any object in a row can be modified any time when the row is in the 'active' state. Removal of a row can be done via setting this object to 'destroy'." ::= { cl2DevMonActiveEntry 4 } cl2DevMonActiveRadioMacType OBJECT-TYPE SYNTAX INTEGER { ieee802dot11a(1), ieee802dot11b(2), ieee802dot11g(3) } ACCESS read-write STATUS mandatory DESCRIPTION "If the device being monitored is a IEEE 802.11 Wireless device, cl2DevMonActiveMacAddress is the remote device radio MAC address and this is the type of IEEE 802.11 Standard applies that radio: ieee802dot11a(1) - IEEE 802.11a Standard, ieee802dot11b(2) - IEEE 802.11b Standard, ieee802dot11g(3) - IEEE 802.11g Standard. If the device being monitored is not a IEEE 802.11 Wireless device, the default value for this object is '0'." REFERENCE "IEEE P802.11g (expected June 2003), Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Higher Speed Physical Layer (PHY) Extension to IEEE 802.11b." ::= { cl2DevMonActiveEntry 5 } cl2DevMonActiveLocalRadioIndex OBJECT-TYPE SYNTAX InterfaceIndex -- Rsyntax INTEGER(1..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "If the device being monitored is a IEEE 802.11 Wireless LAN device, this is the ifIndex of a local radio of ifType ieee80211(71) used for the monitoring. If the local radio only supports to monitor only one remote radio, adding or updating multiple rows to the same ifIndex is not allowed." ::= { cl2DevMonActiveEntry 6 } cl2DevMonSwitchover TRAP-TYPE -- Reverse mappable trap ENTERPRISE ciscoL2DevMonMIB VARIABLES { cl2DevMonActivePollingFrequency, cl2DevMonActivePollingTimeOut } -- Status -- mandatory DESCRIPTION "This cl2DevMonSwitchover notification will only be sent when this device changes its cl2DevMonInStandbyMode to FALSE and becomes an active unit. The sending of these notifications can be enabled/disabled via the cl2DevMonNotifEnabled object." ::= 1 ciscoL2DevMonConfigGroup OBJECT IDENTIFIER ::= { ciscoL2DevMonMIBGroups 1 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- Management information to support operation of -- L2 monitoring and hot standby. -- objects -- cl2DevMonInStandbyMode, cl2DevMonNotifEnabled, -- cl2DevMonActivePollingFrequency, -- cl2DevMonActivePollingTimeOut, cl2DevMonActiveRowStatus ciscoL2DevMonRadioConfigGroup OBJECT IDENTIFIER ::= { ciscoL2DevMonMIBGroups 3 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- Management information to identify the MAC type -- of a IEEE 802.11 Wireless LAN device and local -- radio ifIndex. -- objects -- cl2DevMonActiveRadioMacType, cl2DevMonActiveLocalRadioIndex ciscoL2DevMonNotificationGroup OBJECT IDENTIFIER ::= { ciscoL2DevMonMIBGroups 2 } -- NOTIFICATION-GROUP -- Status -- mandatory -- Descr -- The notifications for the -- CISCO-L2-DEV-MONITORING-MIB -- notifications -- cl2DevMonSwitchover ciscoL2DevMonCompliance OBJECT IDENTIFIER ::= { ciscoL2DevMonMIBCompliances 1 } -- MODULE-COMPLIANCE -- Status -- deprecated -- Descr -- The compliance statement for the -- ciscoL2DevMonConfig group. -- Module -- >>current<< -- MandGroup -- ciscoL2DevMonConfigGroup -- MandGroup -- ciscoL2DevMonNotificationGroup ciscoL2DevMonComplianceRev1 OBJECT IDENTIFIER ::= { ciscoL2DevMonMIBCompliances 2 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- The compliance statement for the -- ciscoL2DevMonConfig group. -- Module -- >>current<< -- MandGroup -- ciscoL2DevMonConfigGroup -- MandGroup -- ciscoL2DevMonNotificationGroup -- OptGroup -- ciscoL2DevMonRadioConfigGroup END