-- MIB file created 13-Feb-2013 02:17:38, by -- SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com CISCO-LWAPP-CDP-MIB DEFINITIONS ::= BEGIN -- From file: "CISCO-LWAPP-CDP-MIB.my" -- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T" IMPORTS DisplayString, TruthValue FROM SNMPv2-TC-v1 SnmpAdminString FROM SNMP-FRAMEWORK-MIB InetAddress, InetAddressType FROM INET-ADDRESS-MIB InterfaceIndexOrZero FROM IF-MIB cLApSysMacAddress FROM CISCO-LWAPP-AP-MIB CLCdpAdvtVersionType FROM CISCO-LWAPP-TC-MIB ciscoMgmt FROM CISCO-SMI Counter, Gauge FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212; ciscoLwappCdpMIB OBJECT IDENTIFIER ::= { ciscoMgmt 623 } -- MODULE-IDENTITY -- LastUpdated -- 200911230000Z -- OrgName -- Cisco Systems Inc. -- ContactInfo -- Cisco Systems, -- Customer Service -- -- Postal: 170 West Tasman Drive -- San Jose, CA 95134 -- USA -- -- Tel: +1 800 553-NETS -- -- Email: cs-wnbu-snmcp@cisco.com -- Descr -- This MIB is intended to be implemented on all those -- devices operating as Central Controllers (CC) that -- terminate the Light Weight Access Point Protocol -- tunnel from Light-weight LWAPP Access Points. -- -- This MIB provides configuration and status information -- about CDP neighbors of LWAPP APs. The MIB provides -- configuration of CDP feature on the LWAPP Access Points. -- The MIB can also be used to retrive the status of the -- CDP cache information on the various LWAPP LWAPP Access -- Points. -- -- The CDP MIB is also supported by Controller and provides -- configuration and status information about CDP neighbours -- of the controller. -- -- The relationship between CC and the LWAPP APs -- can be depicted as follows: -- -- +......+ +......+ +......+ +......+ -- + + + + + + + + -- + CC + + CC + + CC + + CC + -- + + + + + + + + -- +......+ +......+ +......+ +......+ -- .. . . . -- .. . . . -- . . . . . -- . . . . . -- . . . . . -- . . . . . -- +......+ +......+ +......+ +......+ +......+ -- + + + + + + + + + + -- + AP + + AP + + AP + + AP + + AP + -- + + + + + + + + + + -- +......+ +......+ +......+ +......+ +......+ -- . . . . -- . . . . . -- . . . . . -- . . . . . -- . . . . . -- +......+ +......+ +......+ +......+ +......+ -- + + + + + + + + + + -- + MN + + MN + + MN + + MN + + MN + -- + + + + + + + + + + -- +......+ +......+ +......+ +......+ +......+ -- -- -- The LWAPP tunnel exists between the controller and -- the APs. The MNs communicate with the APs through -- the protocol defined by the 802.11 standard. -- -- LWAPP APs, upon bootup, discover and join one of the -- controllers and the controller pushes the configuration, -- that includes the WLAN parameters, to the LWAPP APs. -- The APs then encapsulate all the 802.11 frames from -- wireless clients inside LWAPP frames and forward -- the LWAPP frames to the controller. -- -- GLOSSARY -- -- Access Point ( AP ) -- -- An entity that contains an 802.11 medium access -- control ( MAC ) and physical layer ( PHY ) interface -- and provides access to the distribution services via -- the wireless medium for associated clients. -- -- LWAPP APs encapsulate all the 802.11 frames in -- LWAPP frames and sends it to the controller to which -- it is logically connected. -- -- Basic Service Set Identifier (BSSID) -- -- The identifier for the service set comprising of -- all the 802.11 stations under the control of -- one coordinating Access Point. This identifier -- happens to be the MAC address of the dot11 radio -- interface of the Access Point. The wireless -- clients that associate with the Access Point -- get the wired uplink through this particular -- dot11 interface. -- -- Central Controller ( CC ) -- -- The central entity that terminates the LWAPP protocol -- tunnel from the LWAPP APs. Throughout this MIB, -- this entity also referred to as 'controller'. -- -- Light Weight Access Point Protocol ( LWAPP ) -- -- This is a generic protocol that defines the -- communication between the Access Points and the -- Central Controller. -- -- Cisco Discovery Protocol ( CDP ) -- -- Protocol for discovery of neighboring devices. -- -- -- REFERENCE -- -- [1] Part 11 Wireless LAN Medium Access Control ( MAC ) -- and Physical Layer ( PHY ) Specifications. -- -- [2] Draft-obara-capwap-lwapp-00.txt, IETF Light -- Weight Access Point Protocol. -- RevDate -- 200911230000Z -- RevDescr -- Added the variables clcCdpApCacheDuplex and -- clcCdpApCacheInterfaceSpeed to clcCdpApCacheTable. -- RevDate -- 200703280000Z -- RevDescr -- This is the initial version of this module. ciscoLwappCdpMIBNotifs OBJECT IDENTIFIER ::= { ciscoLwappCdpMIB 0 } ciscoLwappCdpMIBObjects OBJECT IDENTIFIER ::= { ciscoLwappCdpMIB 1 } ciscoLwappCdpMIBConform OBJECT IDENTIFIER ::= { ciscoLwappCdpMIB 2 } clcCdpTraffic OBJECT IDENTIFIER ::= { ciscoLwappCdpMIBObjects 1 } clcCdpGlobalConfig OBJECT IDENTIFIER ::= { ciscoLwappCdpMIBObjects 2 } clcCdpApCacheStatus OBJECT IDENTIFIER ::= { ciscoLwappCdpMIBObjects 3 } clcCdpApCacheConfig OBJECT IDENTIFIER ::= { ciscoLwappCdpMIBObjects 4 } ciscoLwappCdpMIBCompliances OBJECT IDENTIFIER ::= { ciscoLwappCdpMIBConform 1 } ciscoLwappCdpMIBGroups OBJECT IDENTIFIER ::= { ciscoLwappCdpMIBConform 2 } clcCdpInPackets OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "Count of total CDP packets received by the Controller." ::= { clcCdpTraffic 1 } clcCdpOutPackets OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "Count of total CDP packets sent by the Controller." ::= { clcCdpTraffic 2 } clcCdpChecksumErrorPackets OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CDP packets that experienced checksum error." ::= { clcCdpTraffic 3 } clcCdpNoMemoryPackets OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CDP packets that were dropped because of no memory availability." ::= { clcCdpTraffic 4 } clcCdpInvalidPackets OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CDP packets that were invalid." ::= { clcCdpTraffic 5 } clcCdpAdvtVersion OBJECT-TYPE SYNTAX CLCdpAdvtVersionType -- Rsyntax INTEGER { -- cdpv1(1), -- cdpv2(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "Cisco Discovery Protocol advertisement version." DEFVAL { cdpv1 } ::= { clcCdpGlobalConfig 1 } clcCdpMessageInterval OBJECT-TYPE SYNTAX Gauge(5..900) -- Units -- seconds ACCESS read-write STATUS mandatory DESCRIPTION "The interval (in seconds) at which CDP messages are to be generated." DEFVAL { 60 } ::= { clcCdpGlobalConfig 2 } clcCdpGlobalEnable OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This is a template variable to enable / disable CDP on all APs. When 'true' is set, then internally CDP is enabled on all APs associated with the Controller. When 'false' is set, then internally CDP is disabled on all APs associated with the Controller. However, setting this attribute has no effect when CDP is disabled globally, that is when the cdpGlobalRun from the CISCO-CDP-MIB is set to 'false'on the Controller." DEFVAL { false } ::= { clcCdpGlobalConfig 3 } clcCdpApTable OBJECT-TYPE SYNTAX SEQUENCE OF ClcCdpApEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The (conceptual) table containing the status of Cisco Discovery Protocol on LWAPP Access Points. An entry is added to the table when an Aceess Point joins a controller. An entry is deleted when the Access Point disassociates from the controller. This table is used to configure CDP feature per Access Point." ::= { clcCdpApCacheConfig 1 } clcCdpApEntry OBJECT-TYPE SYNTAX ClcCdpApEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (conceptual row) in the clcCdpApTable, containing the status of CDP on an AP. Consider a setup where two APs, 'AP1' and 'AP2' have been connected to a CISCO-3750 switch. Both the APs register with WLAN CONTROLLER 440x which is on LAN/Internet/Intranet. +.........................+ + + + WLAN CONTROLLER 4400 + + 10.14.2.11 + +.........................+ .. .. INTERNET .. LAN .. +...............+ + + + SWITCH-3750 + + 10.16.1.1 + +...............+ .. . . . . . . . . . . +......+ +......+ + + + + + AP1 + + AP2 + + + + + +......+ +......+ 00:12:CF:DA:29:11 23:43:CE:9A:66:76 10.16.1.43 10.16.1.45 Given the above example, the clcCdpApEntry on WLAN CONTROLLER 4400 looks like : ------------------------------------------------------------------ | MIB - ATTRIBUTES | ROW#1 | ROW#2 | ------------------------------------------------------------------ | cLApSysMacAddress | 00:12:CF:DA:29:11 | 23:43:CE:9A:66:76 | ------------------------------------------------------------------ | clcCdpApStatus | true | false | ------------------------------------------------------------------" INDEX { cLApSysMacAddress } ::= { clcCdpApTable 1 } ClcCdpApEntry ::= SEQUENCE { clcCdpApCdpEnable TruthValue } clcCdpApCdpEnable OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "An indication of whether the Cisco Discovery Protocol is currently running on this AP. When set to 'true', that means CDP is enabled on the AP denoted by MAC address cLApSysMacAddress. When set to 'false', that means CDP is disabled on the AP denoted by MAC address cLApSysMacAddress. This variable has no effect when CDP is globally disabled. That is when the cdpGlobalRun from the CISCO-CDP-MIB is set to 'false'." DEFVAL { false } ::= { clcCdpApEntry 1 } clcCdpApCacheTable OBJECT-TYPE SYNTAX SEQUENCE OF ClcCdpApCacheEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains the cached neighbor information obtained via receiving CDP messages on APs. Entries are added to this table when a CDP advertisement is received from a neighboring device. Entries get deleted when CDP is disabled on the interface or globally." ::= { clcCdpApCacheStatus 1 } clcCdpApCacheEntry OBJECT-TYPE SYNTAX ClcCdpApCacheEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the clcCdpApCacheTable, containing the information received via CDP on one interface from one device. Entries appear when a CDP advertisement is received from a neighbor device. Entries disappear when CDP is disabled on the interface or globally. Consider a setup where two APs, 'AP1' and 'AP2' have been connected to a CISCO-3750 switch. Both the APs register with WLAN CONTROLLER 4400 which is on LAN/Internet/Intranet. +.........................+ + + + WLAN CONTROLLER 4400 + + 10.14.2.11 + +.........................+ .. .. INTERNET .. LAN .. +...............+ + + + SWITCH-3750 + + 10.16.1.1 + +...............+ FE 0/13 .. FE 0/15 . . . . . . . . . . +......+ +......+ + + + + + AP1 + + AP2 + + + + + +......+ +......+ 00:12:CF:DA:29:11 23:43:CE:9A:66:76 10.16.1.43 10.16.1.45 Given the above example, the clcCdpApEntry on WLAN CONTROLLER 4400 looks like : ---------------------------------------------------------------------- | MIB - ATTRIBUTES | ROW#1 | ROW#2 | ---------------------------------------------------------------------- | cLApSysMacAddress | 00:12:CF:DA:29:11 | 23:43:CE:9A:66:76| ---------------------------------------------------------------------- | clcCdpApCacheDeviceIndex | 16 | 16 | ---------------------------------------------------------------------- | clcCdpApCacheApName | AP1 | AP2 | ---------------------------------------------------------------------- | clcCdpApCacheApAddressType | ip(1) | ip(1) | ---------------------------------------------------------------------- | clcCdpApCacheApAddress | 10.16.1.43 | 10.16.1.45 | ---------------------------------------------------------------------- | clcCdpApCacheLocalInterface | Port - 1 | Port -2 | ---------------------------------------------------------------------- | clcCdpApCacheNeighName | SWITCH-3750 | SWITCH-3750 | ---------------------------------------------------------------------- | clcCdpApCacheNeighAddressType| ip(1) | ip(1) | ---------------------------------------------------------------------- | clcCdpApCacheNeighAddress | 10.16.1.1 | 10.16.1.1 | ---------------------------------------------------------------------- | clcCdpApCacheNeighInterface | FE 0/13 | FE 0/45 | ---------------------------------------------------------------------- | clcCdpApCacheNeighVersion | IOS Ver2.2. ... | IOS Ver 2.2. ... | ---------------------------------------------------------------------- | clcCdpApCacheAdvtVersion | cdpv1(1) | cdpv2(2) | ---------------------------------------------------------------------- | clcCdpApCachePlatform | WS-C3750-24P | WS-C3750-24P | ---------------------------------------------------------------------- | clcCdpApCacheCapabilities | RSI | RSI | ---------------------------------------------------------------------- | clcCdpApCacheHoldtimeLeft | 179 | 165 | ---------------------------------------------------------------------- | clcCdpApCacheDuplex | fullduplex(3) | fullduplex(3) | ---------------------------------------------------------------------- | clcCdpApCacheInterfaceSpeed | hundredMbps(2) | hundredMbps(2) | ----------------------------------------------------------------------" INDEX { cLApSysMacAddress, clcCdpApCacheDeviceIndex } ::= { clcCdpApCacheTable 1 } ClcCdpApCacheEntry ::= SEQUENCE { clcCdpApCacheDeviceIndex Gauge, clcCdpApCacheApName SnmpAdminString, clcCdpApCacheApAddressType InetAddressType, clcCdpApCacheApAddress InetAddress, clcCdpApCacheLocalInterface InterfaceIndexOrZero, clcCdpApCacheNeighName DisplayString, clcCdpApCacheNeighAddressType InetAddressType, clcCdpApCacheNeighAddress InetAddress, clcCdpApCacheNeighInterface DisplayString, clcCdpApCacheNeighVersion DisplayString, clcCdpApCacheAdvtVersion CLCdpAdvtVersionType, clcCdpApCachePlatform DisplayString, clcCdpApCacheCapabilities OCTET STRING, clcCdpApCacheHoldtimeLeft Gauge, clcCdpApCacheDuplex INTEGER, clcCdpApCacheInterfaceSpeed INTEGER } clcCdpApCacheDeviceIndex OBJECT-TYPE SYNTAX Gauge(0..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "A unique value for each device from which CDP messages are being received." ::= { clcCdpApCacheEntry 1 } clcCdpApCacheApName OBJECT-TYPE SYNTAX SnmpAdminString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Name assigned to this AP. If an AP is not configured its factory default name will be ap:. eg. ap:af:12:be" ::= { clcCdpApCacheEntry 2 } clcCdpApCacheApAddressType OBJECT-TYPE SYNTAX InetAddressType -- Rsyntax INTEGER { -- ?? enum value of zero may cause problems -- unknown(0), -- ipv4(1), -- ipv6(2), -- ipv4z(3), -- ipv6z(4), -- dns(16) -- } ACCESS read-only STATUS mandatory DESCRIPTION "An indication of the type of address contained in the corresponding instance of clcCdpApCacheAddress for the AP." ::= { clcCdpApCacheEntry 3 } clcCdpApCacheApAddress OBJECT-TYPE SYNTAX InetAddress -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the address of the AP. For example, if the the corresponding instance of clcCdpApCacheApAddressType had the value 'ip(1)', then this object would be an IP-address." ::= { clcCdpApCacheEntry 4 } clcCdpApCacheLocalInterface OBJECT-TYPE SYNTAX InterfaceIndexOrZero -- Rsyntax INTEGER(0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is the local port on which LWAPP encapsulated CDP packets was received." ::= { clcCdpApCacheEntry 5 } clcCdpApCacheNeighName OBJECT-TYPE SYNTAX DisplayString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The Device-ID string as reported in the most recent CDP message. The zero-length string indicates no Device-ID field (TLV) was reported in the most recent CDP message." ::= { clcCdpApCacheEntry 6 } clcCdpApCacheNeighAddressType OBJECT-TYPE SYNTAX InetAddressType -- Rsyntax INTEGER { -- ?? enum value of zero may cause problems -- unknown(0), -- ipv4(1), -- ipv6(2), -- ipv4z(3), -- ipv6z(4), -- dns(16) -- } ACCESS read-only STATUS mandatory DESCRIPTION "An indication of the type of address contained in the corresponding instance of clcCdpApCacheAddress of Neighbor." ::= { clcCdpApCacheEntry 7 } clcCdpApCacheNeighAddress OBJECT-TYPE SYNTAX InetAddress -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The (first) network-layer address of the device's SNMP-agent as reported in the most recent CDP message. For example, if the the corresponding instance of clcCdpApCacheApAddressType had the value 'ip(1)', then this object would be an IP-address." ::= { clcCdpApCacheEntry 8 } clcCdpApCacheNeighInterface OBJECT-TYPE SYNTAX DisplayString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The Port-ID string as reported in the most recent CDP message. This will typically be the value of the ifName object (e.g., 'Ethernet0'). The zero-length string indicates no Port-ID field (TLV) was reported in the most recent CDP message." ::= { clcCdpApCacheEntry 9 } clcCdpApCacheNeighVersion OBJECT-TYPE SYNTAX DisplayString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The Version string refers to the software running on neighboring device." ::= { clcCdpApCacheEntry 10 } clcCdpApCacheAdvtVersion OBJECT-TYPE SYNTAX CLCdpAdvtVersionType -- Rsyntax INTEGER { -- cdpv1(1), -- cdpv2(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "Cisco Discovery Protocol advertisement version." DEFVAL { cdpv1 } ::= { clcCdpApCacheEntry 11 } clcCdpApCachePlatform OBJECT-TYPE SYNTAX DisplayString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The Device's Hardware Platform as reported in the most recent CDP message. The zero-length string indicates that no Platform field (TLV) was reported in the most recent CDP message." ::= { clcCdpApCacheEntry 12 } clcCdpApCacheCapabilities OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The Device's Functional Capabilities as reported in the most recent CDP message. For latest set of specific values, see the latest version of the CDP specification. The zero-length string indicates no Capabilities field (TLV) was reported in the most recent CDP message." ::= { clcCdpApCacheEntry 13 } clcCdpApCacheHoldtimeLeft OBJECT-TYPE SYNTAX Gauge(10..255) -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "The time left, in seconds, before the CDP neighbor entry gets aged-out." DEFVAL { 180 } ::= { clcCdpApCacheEntry 14 } clcCdpApCacheDuplex OBJECT-TYPE SYNTAX INTEGER { unknown(1), fullduplex(2), halfduplex(3), auto(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This object denotes the duplex mode of the Ethernet interface between the AP and it's neighboring CDP device, as reported in the most recent CDP message. The value unknown(1) indicates no duplex mode field (TLV) was reported in the most recent CDP message or the neighboring device is not connected to the AP though ethernet interface." ::= { clcCdpApCacheEntry 15 } clcCdpApCacheInterfaceSpeed OBJECT-TYPE SYNTAX INTEGER { none(1), tenMbps(2), hundredMbps(3), thousandMbps(4), auto(5) } -- Units -- Mbps ACCESS read-only STATUS mandatory DESCRIPTION "This variable denotes the speed of the Ethernet interface between the AP and it's neighboring CDP device. The unit is Mbps. This variable would be populated at AP join and periodically thereafter. The value none(1), would be shown if the interface is not an ethernet interface." ::= { clcCdpApCacheEntry 16 } clcCdpRev01ConfigGroup OBJECT IDENTIFIER ::= { ciscoLwappCdpMIBGroups 1 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- This is a collection of objects which can -- configured to control functional parameters -- of Cisco Discovery Protocol feature in -- WLAN controllers and LWAPP APs. -- objects -- clcCdpApCdpEnable, clcCdpAdvtVersion, clcCdpMessageInterval, -- clcCdpGlobalEnable clcCdpRev01StatusGroup OBJECT IDENTIFIER ::= { ciscoLwappCdpMIBGroups 2 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- This collection of objects represents the information -- about the general status attributes of Cisco Discovery -- Protocol in WLAN controllers and LWAPP APs. -- objects -- clcCdpApCacheApName, clcCdpApCacheApAddressType, -- clcCdpApCacheApAddress, clcCdpApCacheLocalInterface, -- clcCdpApCacheNeighName, clcCdpApCacheNeighAddressType, -- clcCdpApCacheNeighAddress, clcCdpApCacheNeighInterface, -- clcCdpApCacheNeighVersion, clcCdpApCacheAdvtVersion, -- clcCdpApCachePlatform, clcCdpApCacheCapabilities, -- clcCdpApCacheHoldtimeLeft, clcCdpInPackets, clcCdpOutPackets, -- clcCdpChecksumErrorPackets, clcCdpNoMemoryPackets, -- clcCdpInvalidPackets clcCdpRev02StatusGroup OBJECT IDENTIFIER ::= { ciscoLwappCdpMIBGroups 3 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- These are the additional objects which represent -- the information about the general status attributes -- of Cisco Discovery Protocol in WLAN controllers and LWAPP APs. -- objects -- clcCdpApCacheDuplex, clcCdpApCacheInterfaceSpeed ciscoLwappCdpMIBCompliance OBJECT IDENTIFIER ::= { ciscoLwappCdpMIBCompliances 1 } -- MODULE-COMPLIANCE -- Status -- deprecated -- Descr -- The compliance statement for the SNMP entities that -- implement the ciscoLwappCdpMIB module. -- Module -- >>current<< -- MandGroup -- clcCdpRev01ConfigGroup -- MandGroup -- clcCdpRev01StatusGroup ciscoLwappCdpMIBComplianceRev1 OBJECT IDENTIFIER ::= { ciscoLwappCdpMIBCompliances 2 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- The compliance statement for the SNMP entities that -- implement the ciscoLwappCdpMIB module. -- Module -- >>current<< -- MandGroup -- clcCdpRev01ConfigGroup -- MandGroup -- clcCdpRev01StatusGroup -- MandGroup -- clcCdpRev02StatusGroup END