-- MIB file created 18-Sep-2013 11:38:17, by
--   SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com

CISCO-MEMORY-POOL-MIB DEFINITIONS ::= BEGIN

-- From file: "CISCO-MEMORY-POOL-MIB.my"
-- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T"

IMPORTS
    DisplayString, TruthValue
            FROM SNMPv2-TC-v1
    Percent
            FROM CISCO-QOS-PIB-MIB
    ciscoMgmt
            FROM CISCO-SMI
    Gauge
            FROM RFC1155-SMI
    OBJECT-TYPE
            FROM RFC-1212
    TRAP-TYPE
            FROM RFC-1215;

ciscoMemoryPoolMIB OBJECT IDENTIFIER ::= { ciscoMgmt 48 }
-- MODULE-IDENTITY
--  LastUpdated
--    201309180000Z
--  OrgName
--    Cisco Systems, Inc.
--  ContactInfo
--    Postal: Cisco Systems, Inc.
--    170 West Tasman Drive
--    San Jose, CA 95134-1706
--    USA
--    
--    Tel: +1 408 526 4000
--    
--    E-mail: cs-snmp@cisco.com
--  Descr
--    MIB module for monitoring memory pools
--  RevDate
--    201309180000Z
--  RevDescr
--    Added new notification ciscoMemoryPoolLowMemoryNotif.
--    Added new notification ciscoMemoryPoolLowMemoryRecoveryNotif.
--    Added new object ciscoMemoryPoolLowMemoryNotifEnable.
--    Added new object ciscoMemoryPoolLowMemoryNotifThreshold.
--    Added new group ciscoMemoryPoolGroupRev1 which deprecates 
--    ciscoMemoryPoolGroup.
--    Added new compliance ciscoMemoryPoolComplianceRev2 which
--    deprecates ciscoMemoryPoolComplianceRev1.
--  RevDate
--    200107310000Z
--  RevDescr
--    Added a new table, ciscoMemoryPoolUtilizationTable, which
--    provides information about memory utilization.
--  RevDate
--    199602010000Z
--  RevDescr
--    Initial version of this MIB module.

ciscoMemoryPoolObjects OBJECT IDENTIFIER ::= { ciscoMemoryPoolMIB 1 }
ciscoMemoryPoolNotifications OBJECT IDENTIFIER ::= { ciscoMemoryPoolMIB 2 }
ciscoMemoryPoolMIBNotificationPrefix OBJECT IDENTIFIER ::= { ciscoMemoryPoolNotifications 0 }
ciscoMemoryPoolConformance OBJECT IDENTIFIER ::= { ciscoMemoryPoolMIB 3 }
ciscoMemoryPoolCompliances OBJECT IDENTIFIER ::= { ciscoMemoryPoolConformance 1 }
ciscoMemoryPoolGroups OBJECT IDENTIFIER ::= { ciscoMemoryPoolConformance 2 }

CiscoMemoryPoolTypes ::= INTEGER(1..65535)
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    Represents the different types of memory pools that
--    may be present in a managed device.  Memory pools can
--    be roughly categorized into two groups, predefined
--    pools and dynamic pools.  The following pool types
--    are currently predefined:
--        1:  processor memory
--        2:  i/o memory
--        3:  pci memory
--        4:  fast memory
--        5:  multibus memory
--    
--    Dynamic pools will have a pool type value greater than
--    any of the predefined types listed above.
--    
--    Note that only the processor pool is required to be
--    supported by all devices.  Support for other pool types
--    is dependent on the device being managed.

ciscoMemoryPoolTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CiscoMemoryPoolEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A table of memory pool monitoring entries."
    ::= { ciscoMemoryPoolObjects 1 }

ciscoMemoryPoolEntry OBJECT-TYPE
    SYNTAX CiscoMemoryPoolEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry in the memory pool monitoring table."
    INDEX { ciscoMemoryPoolType }
    ::= { ciscoMemoryPoolTable 1 }

CiscoMemoryPoolEntry ::= SEQUENCE {
    ciscoMemoryPoolType CiscoMemoryPoolTypes,
    ciscoMemoryPoolName DisplayString,
    ciscoMemoryPoolAlternate INTEGER,
    ciscoMemoryPoolValid TruthValue,
    ciscoMemoryPoolUsed Gauge,
    ciscoMemoryPoolFree Gauge,
    ciscoMemoryPoolLargestFree Gauge,
    ciscoMemoryPoolLowMemoryNotifThreshold Percent
    }

ciscoMemoryPoolType OBJECT-TYPE
    SYNTAX CiscoMemoryPoolTypes
--    Rsyntax INTEGER(1..65535)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The type of memory pool for which this entry
        contains information."
    ::= { ciscoMemoryPoolEntry 1 }

ciscoMemoryPoolName OBJECT-TYPE
    SYNTAX DisplayString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "A textual name assigned to the memory pool.  This
        object is suitable for output to a human operator,
        and may also be used to distinguish among the various
        pool types, especially among dynamic pools."
    ::= { ciscoMemoryPoolEntry 2 }

ciscoMemoryPoolAlternate OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates whether or not this memory pool has an
        alternate pool configured.  Alternate pools are
        used for fallback when the current pool runs out
        of memory.
        
        If an instance of this object has a value of zero,
        then this pool does not have an alternate.  Otherwise
        the value of this object is the same as the value of
        ciscoMemoryPoolType of the alternate pool."
    ::= { ciscoMemoryPoolEntry 3 }

ciscoMemoryPoolValid OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates whether or not the remaining objects in
        this entry contain accurate data.  If an instance
        of this object has the value false (which in and of
        itself indicates an internal error condition), the
        values of the remaining objects in the conceptual row
        may contain inaccurate information (specifically, the
        reported values may be less than the actual values)."
    ::= { ciscoMemoryPoolEntry 4 }

ciscoMemoryPoolUsed OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    bytes
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the number of bytes from the memory pool
        that are currently in use by applications on the
        managed device."
    ::= { ciscoMemoryPoolEntry 5 }

ciscoMemoryPoolFree OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    bytes
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the number of bytes from the memory pool
        that are currently unused on the managed device.
        
        Note that the sum of ciscoMemoryPoolUsed and
        ciscoMemoryPoolFree is the total amount of memory
        in the pool"
    ::= { ciscoMemoryPoolEntry 6 }

ciscoMemoryPoolLargestFree OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    bytes
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the largest number of contiguous bytes
        from the memory pool that are currently unused on
        the managed device."
    ::= { ciscoMemoryPoolEntry 7 }

ciscoMemoryPoolLowMemoryNotifThreshold OBJECT-TYPE
    SYNTAX Percent
--    Rsyntax INTEGER(0..100)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object is used to indicate the threshold value in
        percentage of free memory remaining in a memory pool.
        If the free memory available goes below this threshold value and
        if ciscoMemoryPoolLowMemoryNotifEnable is set to 'true',
        ciscoMemoryPoolLowMemoryNotif will be generated. When the
        available free memory comes back to the threshold value
        ciscoMemoryPoolLowMemoryRecoveryNotif will be generated."
    ::= { ciscoMemoryPoolEntry 8 }

ciscoMemoryPoolUtilizationTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CiscoMemoryPoolUtilizationEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A table of memory pool utilization entries. Each of the
        objects provides a general idea of how much of the memory
        pool has been used over a given period of time. It is
        determined as a weighted decaying average."
    ::= { ciscoMemoryPoolObjects 2 }

ciscoMemoryPoolUtilizationEntry OBJECT-TYPE
    SYNTAX CiscoMemoryPoolUtilizationEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry in the memory pool utilization table."
    INDEX { ciscoMemoryPoolType }
-- Augments ciscoMemoryPoolEntry
    ::= { ciscoMemoryPoolUtilizationTable 1 }

CiscoMemoryPoolUtilizationEntry ::= SEQUENCE {
    ciscoMemoryPoolUtilization1Min Percent,
    ciscoMemoryPoolUtilization5Min Percent,
    ciscoMemoryPoolUtilization10Min Percent
    }

ciscoMemoryPoolUtilization1Min OBJECT-TYPE
    SYNTAX Percent
--    Rsyntax INTEGER(0..100)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This is the memory pool utilization for 1 minute."
    ::= { ciscoMemoryPoolUtilizationEntry 1 }

ciscoMemoryPoolUtilization5Min OBJECT-TYPE
    SYNTAX Percent
--    Rsyntax INTEGER(0..100)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This is the memory pool utilization for 5 minutes."
    ::= { ciscoMemoryPoolUtilizationEntry 2 }

ciscoMemoryPoolUtilization10Min OBJECT-TYPE
    SYNTAX Percent
--    Rsyntax INTEGER(0..100)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This is the memory pool utilization for 10 minutes."
    ::= { ciscoMemoryPoolUtilizationEntry 3 }

ciscoMemoryPoolLowMemoryNotifEnable OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object is used to enable or disable the generation of
        notification when the available memory in the system has fallen
        below ciscoMemoryPoolLowMemoryNotifThreshold and on recovery.
        
        Setting this object to 'true' will generate
        ciscoMemoryPoolLowMemoryNotif and 
        ciscoMemoryPoolLowMemoryRecoveryNotif. 
        
        Setting this object to 'false' will disable the generation of
        ciscoMemoryPoolLowMemoryNotif and
        ciscoMemoryPoolLowMemoryRecoveryNotif."
    ::= { ciscoMemoryPoolObjects 3 }

ciscoMemoryPoolLowMemoryNotif TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE ciscoMemoryPoolNotifications
    VARIABLES {
        ciscoMemoryPoolName, ciscoMemoryPoolUsed }
--  Status
--    mandatory
    DESCRIPTION
        "This notification is generated when the percentage of free
        memory in the system has fallen below
        ciscoMemoryPoolLowMemoryNotifThreshold and when the value of
        ciscoMemoryPoolLowMemoryNotifEnable is set to 'true'.
        
        ciscoMemoryPoolName indicates the name of the memory pool for
        which the notification is being generated.
        
        ciscoMemoryPoolUsed indicates the used memory in bytes for the
        memory pool."
    ::= 1

ciscoMemoryPoolLowMemoryRecoveryNotif TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE ciscoMemoryPoolNotifications
    VARIABLES {
        ciscoMemoryPoolName, ciscoMemoryPoolUsed }
--  Status
--    mandatory
    DESCRIPTION
        "This notification is generated when the percentage of free
        memory in the system has returned to
        ciscoMemoryPoolLowMemoryNotifThreshold after suffering from a
        low memory. This notification is generated when the value of
        ciscoMemoryPoolLowMemoryNotifEnable is set to 'true'. This
        notification is generated as a recovery notification for
        ciscoMemoryPoolLowMemoryNotif.
        
        ciscoMemoryPoolName indicates the name of the memory pool for
        which the notification is being generated.
        
        ciscoMemoryPoolUsed indicates the used memory in bytes for the
        memory pool."
    ::= 2

ciscoMemoryPoolGroup OBJECT IDENTIFIER ::= { ciscoMemoryPoolGroups 1 }
-- OBJECT-GROUP
--  Status
--    deprecated
--  Descr
--    A collection of objects providing memory pool monitoring.
--  objects
--    ciscoMemoryPoolName, ciscoMemoryPoolAlternate, 
--    ciscoMemoryPoolValid, ciscoMemoryPoolUsed, 
--    ciscoMemoryPoolFree, ciscoMemoryPoolLargestFree

ciscoMemoryPoolUtilizationGroup OBJECT IDENTIFIER ::= { ciscoMemoryPoolGroups 2 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    An optional group providing a collection of memory pool
--    utilization objects.
--  objects
--    ciscoMemoryPoolUtilization1Min, 
--    ciscoMemoryPoolUtilization5Min, 
--    ciscoMemoryPoolUtilization10Min

ciscoMemoryPoolNotificationCtrlGroup OBJECT IDENTIFIER ::= { ciscoMemoryPoolGroups 4 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of all the notification control objects.
--  objects
--    ciscoMemoryPoolLowMemoryNotifEnable

ciscoMemoryPoolGroupRev1 OBJECT IDENTIFIER ::= { ciscoMemoryPoolGroups 5 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects providing memory pool monitoring.
--  objects
--    ciscoMemoryPoolName, ciscoMemoryPoolAlternate, 
--    ciscoMemoryPoolValid, ciscoMemoryPoolUsed, 
--    ciscoMemoryPoolFree, ciscoMemoryPoolLargestFree, 
--    ciscoMemoryPoolLowMemoryNotifThreshold

ciscoMemoryPoolNotificationGroup OBJECT IDENTIFIER ::= { ciscoMemoryPoolGroups 3 }
-- NOTIFICATION-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of all the notifications supported in the
--    CISCO-MEMORY-POOL-MIB.
--  notifications
--    ciscoMemoryPoolLowMemoryNotif, 
--    ciscoMemoryPoolLowMemoryRecoveryNotif

ciscoMemoryPoolCompliance OBJECT IDENTIFIER ::= { ciscoMemoryPoolCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    deprecated
--  Descr
--    The compliance statement for entities which implement
--    the Cisco Memory Pool MIB
--  Module
--    >>current<<
--   MandGroup
--    ciscoMemoryPoolGroup

ciscoMemoryPoolComplianceRev1 OBJECT IDENTIFIER ::= { ciscoMemoryPoolCompliances 2 }
-- MODULE-COMPLIANCE
--  Status
--    deprecated
--  Descr
--    The compliance statement for entities which implement
--    the Cisco Memory Pool MIB
--  Module
--    >>current<<
--   MandGroup
--    ciscoMemoryPoolGroup
--   OptGroup
--    ciscoMemoryPoolUtilizationGroup

ciscoMemoryPoolComplianceRev2 OBJECT IDENTIFIER ::= { ciscoMemoryPoolCompliances 3 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    The compliance statement for entities which implement
--    the Cisco Memory Pool MIB
--  Module
--    >>current<<
--   MandGroup
--    ciscoMemoryPoolGroupRev1
--   OptGroup
--    ciscoMemoryPoolUtilizationGroup
--   OptGroup
--    ciscoMemoryPoolNotificationGroup
--   OptGroup
--    ciscoMemoryPoolNotificationCtrlGroup


END