-- MIB file created 07-Apr-2003 18:16:58, by -- SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com CISCO-MGX82XX-DSX1-MIB DEFINITIONS ::= BEGIN -- From file: "CISCO-MGX82XX-DSX1-MIB.my" -- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T" IMPORTS dsx1Line FROM BASIS-MIB ciscoWan FROM CISCOWAN-SMI Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212; ciscoMgx82xxDsx1MIB OBJECT IDENTIFIER ::= { ciscoWan 58 } -- MODULE-IDENTITY -- LastUpdated -- 200303310000Z -- OrgName -- Cisco Systems, Inc. -- ContactInfo -- Cisco Systems -- Customer Service -- -- Postal: 170 W Tasman Drive -- San Jose, CA 95134 -- USA -- -- Tel: +1 800 553-NETS -- -- E-mail: cs-wanatm@cisco.com -- Descr -- The MIB module to configure DS1/E1 interface -- objects. This mib also contains the alarm -- configuration of DS1/E1 interfaces. This mib -- is supported in T1/E1 service modules. -- RevDate -- 200303310000Z -- RevDescr -- Initial version of the MIB. -- -- The content of this MIB was originally available -- in SMIv1 version. The MIB has been converted to -- SMIv2 version and descriptions of some of the objects -- have been modified. dsx1CnfGrp OBJECT IDENTIFIER ::= { dsx1Line 1 } dsx1AlmCnfGrp OBJECT IDENTIFIER ::= { dsx1Line 2 } dsx1AlmGrp OBJECT IDENTIFIER ::= { dsx1Line 3 } dsx1CntGrp OBJECT IDENTIFIER ::= { dsx1Line 4 } cmDsx1MIBConformance OBJECT IDENTIFIER ::= { ciscoMgx82xxDsx1MIB 2 } cmDsx1MIBGroups OBJECT IDENTIFIER ::= { cmDsx1MIBConformance 1 } cmDsx1MIBCompliances OBJECT IDENTIFIER ::= { cmDsx1MIBConformance 2 } dsx1CnfGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF Dsx1CnfGrpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The DS1/E1 Configuration table. The table size is given by the value of lineNumofValidEntries" ::= { dsx1CnfGrp 1 } dsx1CnfGrpEntry OBJECT-TYPE SYNTAX Dsx1CnfGrpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the DS1 Configuration table." INDEX { lineNum } ::= { dsx1CnfGrpTable 1 } Dsx1CnfGrpEntry ::= SEQUENCE { lineNum INTEGER, lineConnectorType INTEGER, lineEnable INTEGER, lineType INTEGER, lineCoding INTEGER, lineLength INTEGER, lineXmtClockSource INTEGER, lineLoopbackCommand INTEGER, lineSendCode INTEGER, lineLoopbackCodeDetection INTEGER, lineUsedTimeslotsBitMap INTEGER, lineBERTEnable INTEGER, lineBERTPattern INTEGER, lineBERTResult INTEGER, bERTResultClrButton INTEGER } lineNum OBJECT-TYPE SYNTAX INTEGER(1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object is the identifier of a DS1/E1 Interface on a managed device. If there is an ifEntry that is directly associated with this and only this DS1/E1 interface, it should have the same value as ifIndex. Otherwise, number the ds1LineIndices with an unique identifier following the rules of choosing a number that is greater than ifNumber and numbering the inside interfaces (e.g., equipment side) with even numbers and outside interfaces (e.g, network side) with odd numbers. The supported ranges depend upon the type of the card(4 port/8 port etc): For 4 port card : 1 - 4 For 8 port card : 1 - 8 For 2 Port Channelized card : 56 (28*2)." ::= { dsx1CnfGrpEntry 1 } lineConnectorType OBJECT-TYPE SYNTAX INTEGER { db15(1), bnc(2), rj48(3), unused(4), smb(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the connector as well as the backcard type. 1 = T1; 2 = E1. This field is set to unused(4) for FRSM-VHS cards." ::= { dsx1CnfGrpEntry 2 } lineEnable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2), modify(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable disables, enables or modifies a line 1 - disable 2 - enable 3 - modify In FRSM-2CT3, if the DS3 line is enabled, then the DS1 channels for that line will all be automatically enabled. No independent enable/disable is allowed for each of the 28 DS1 lines in FRSM-2CT3." DEFVAL { disable } ::= { dsx1CnfGrpEntry 3 } lineType OBJECT-TYPE SYNTAX INTEGER { dsx1ESF(1), dsx1D4(2), dsx1E1(3), dsx1E1CRC(4), dsx1E1MF(5), dsx1E1CRC-MF(6), dsx1E1clearchannel(7), dsx1E1Q50(8), dsx1E1Q50CRC(9) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the variety of DS1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reasonably carry, as well as the interpretation of the usage and error statistics. The values, in sequence, describe: TITLE: SPECIFICATION: dsx1ESF Extended SuperFrame DS1 dsx1D4 AT&T D4 format DS1 dsx1E1 CCITT Recommendation G.704 (Table 4a) dsx1E1-CRC CCITT Recommendation G.704 (Table 4b) dsxE1-MF G.704 (Table 4a) with TS16 multiframing enabled dsx1E1-CRC-MF G.704 (Table 4b) with TS16 multiframing enabled dsx1E1clearchannel E1 clear channel, all DS0s can be used dsx1E1Q50 G.704 (table 14) In TS16 bits 5,7,8 will be set to 100 for all other cases bits 5,7,8 will have a value of 111. dsx1E1Q50CRC same as dsx1E1Q50 but with CRC. NOTE: All E1, E1-CRC, E1-MF or E1-CRC-MF are using DS0 on slot 1 for signaling and E1-MF or E1-CRC-MF use DS0 on slot 17 for synchronization. (Slot 1 and 16 is based on index 1 to 32 DS0) All DS0s can be used for any port when lineType is dsx1E1clearchannel. On a CESM card, only 'dsx1E1clearchannel' option is supported. When the lineType is dsx1E1Q50 the bits 5,7,8 of TS16 of frame zero will be forced to 100 else it will be 111. The default value for T1 is 'dsx1ESF' and for E1 is 'dsx1E1CCS'." ::= { dsx1CnfGrpEntry 4 } lineCoding OBJECT-TYPE SYNTAX INTEGER { dsx1JBZS(1), dsx1B8ZS(2), dsx1HDB3(3), dsx1AMI(4), unused(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its characteristics. dsx1JBZS(1): refers the Jammed Bit Zero suppression in which the AT&T specification of at least one pulse every 8 bit periods is literally implemented by forcing a pulse in bit 8 of each channel. Thus, only seven bits per chan- nel, or 1.344 Mbps, is available for data. dsx1B8ZS(2): refers to the use of a specified pattern of normal bits and bipolar violations which are used to replace a sequence of eight zero bits. E1 links, with or without CRC, use dsx1HDB3 or dsx1AMI. dsx1AMI(4): refers to a mode wherein no zero code suppression is present and the line encoding does not solve the problem directly. In this application, the higher layer must provide data which meets or exceeds the pulse density requirements, such as inverting HDLC data. The default value for T1 is 'dsx1JBZS' and for E1 is 'dsx1HDB3'. This field is not applicable for FRSM-VHS cards and is set to notUsed(5)." ::= { dsx1CnfGrpEntry 5 } lineLength OBJECT-TYPE SYNTAX INTEGER { lineLength0To110Feet(1), lineLength110To220Feet(2), lineLength220To330Feet(3), lineLength330To440Feet(4), lineLength440To550Feet(5), lineLength550To660Feet(6), lineLength660FeetPlus(7), lineLength-75-Ohm(8), lineLength-120-Ohm(9), lineLength0To131Feet(10), lineLength131To262Feet(11), lineLength262To393Feet(12), lineLength393To524Feet(13), lineLength524To655Feet(14), lineLength655FeetPlus(15), notRequired(16) } ACCESS read-write STATUS mandatory DESCRIPTION "This is not a standard RFC 1407 DS1 variable, it is specific to BASIS implementation. It specifies the line length: 1 - 0 to 110 ft (T1 line only) 2 - 110 to 220 ft (T1 line only) 3 - 220 to 330 ft (T1 line only) 4 - 330 to 440 ft (T1 line only) 5 - 440 to 550 ft (T1 line only) 6 - 550 to 660 ft (T1 line only) 7 - greater than 660 ft (T1 line only) 8 - 75 ohms (E1 line only (BNC)) 9 - 120 ohms (E1 line only (DB-15)) The default value for T1 is 1, for E1, if the connector type is DB15 then the default is 9, if BNC, it's 8. For FRSM-2CT3, the line length of DS1 has no meaning as there are no physical DS1 lines. So, for this card, the value is set to notRequired (16)." ::= { dsx1CnfGrpEntry 6 } lineXmtClockSource OBJECT-TYPE SYNTAX INTEGER { loopTiming(1), localTiming(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The source of Transmit Clock. loopTiming(1): indicates that the recovered receive clock is used as the transmit clock. localTiming(2): indicates that a local clock source is used." DEFVAL { loopTiming } ::= { dsx1CnfGrpEntry 7 } lineLoopbackCommand OBJECT-TYPE SYNTAX INTEGER { dsx1NoLoop(1), dsx1RemoteLoop(2), dsx1LocalLoop(3), dsx1PayloadLoop(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents the loopback confi- guration of the DS1 interface. Agents support- ing read/write access should return badValue in response to a requested loopback state that the interface does not support. The values mean: dsx1NoLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as it's value. dsx1RemoteLoop The received signal at this interface is looped through the device. Typically the received signal is looped back for retransmission after it has passed through the device's framing function. dsx1LocalLoop The local data is looped back dsx1PayloadLoop This will loop only the payload and not framing/sync bit." DEFVAL { dsx1NoLoop } ::= { dsx1CnfGrpEntry 8 } lineSendCode OBJECT-TYPE SYNTAX INTEGER { dsx1SendNoCode(1), dsx1SendLineCode(2), dsx1SendPayloadCode(3), dsx1SendResetCode(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates what type of code is being sent across the DS1 interface by the dev- ice. The values mean: dsx1SendNoCode sending looped or normal data dsx1SendLineCode sending a request for a line loopback dsx1SendPayloadCode sending a request for a payload loopback dsx1SendResetCode sending a loopback termination request " DEFVAL { dsx1SendNoCode } ::= { dsx1CnfGrpEntry 9 } lineUsedTimeslotsBitMap OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "Bit map of used DS0 for this line." ::= { dsx1CnfGrpEntry 10 } lineLoopbackCodeDetection OBJECT-TYPE SYNTAX INTEGER { codeDetectDisabled(1), codeDetectEnabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable detection of line Loopback Codes" DEFVAL { codeDetectDisabled } ::= { dsx1CnfGrpEntry 11 } lineBERTEnable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable enables Bit Error Rate Testing(BERT)." DEFVAL { disable } ::= { dsx1CnfGrpEntry 12 } lineBERTPattern OBJECT-TYPE SYNTAX INTEGER { allZeros(1), allOnes(2), alternateONeZero(3), doubleOneZero(4), userOneWords(5), userTwoWords(6), userThreeWords(7), userFourWords(8), fifteenBit(9), twentyBit(10), twentyBitQRSS(11), twentythreeBit(12) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable determines BERT pattern to transmit" DEFVAL { allZeros } ::= { dsx1CnfGrpEntry 13 } lineBERTResult OBJECT-TYPE SYNTAX INTEGER { failed(1), passed(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This shows the result of the BERT." DEFVAL { failed } ::= { dsx1CnfGrpEntry 14 } bERTResultClrButton OBJECT-TYPE SYNTAX INTEGER { noaction(1), clear(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This clears the result of the BERT." DEFVAL { noaction } ::= { dsx1CnfGrpEntry 15 } lineNumofValidEntries OBJECT-TYPE SYNTAX INTEGER(0..128) ACCESS read-only STATUS mandatory DESCRIPTION "The number of DS1 configuration entries (regardless of their current configuration) in the dsx1CnfGrpTable." ::= { dsx1CnfGrp 2 } dsx1CntGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF Dsx1CntGrpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The DS1 Counter table. This table contains statistics since the system was up or last re-initialization." ::= { dsx1CntGrp 1 } dsx1CntGrpEntry OBJECT-TYPE SYNTAX Dsx1CntGrpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the DS1 counter table." INDEX { cntLineNum } ::= { dsx1CntGrpTable 1 } Dsx1CntGrpEntry ::= SEQUENCE { cntLineNum INTEGER, rcvLOSCount Counter, rcvOOFCount Counter, rcvRAICount Counter, rcvFECount Counter, counterClearButton INTEGER } cntLineNum OBJECT-TYPE SYNTAX INTEGER(1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the DS1/E1 interface. The value for this object must be same as the value of lineNum from dsx1CnfGrpTable." ::= { dsx1CntGrpEntry 1 } rcvLOSCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the Loss of Signal was detected with or without integrating to LOS alarm." ::= { dsx1CntGrpEntry 2 } rcvOOFCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the Out of Frame was detected with or without integrating to OOF alarm." ::= { dsx1CntGrpEntry 3 } rcvRAICount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times Yellow Alarms was detected with or without integrating to RAI alarm." ::= { dsx1CntGrpEntry 4 } rcvFECount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of Framing Pattern Errors encountered by a DS1 interface." ::= { dsx1CntGrpEntry 5 } counterClearButton OBJECT-TYPE SYNTAX INTEGER { noaction(1), clear(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used to clear all the counters." ::= { dsx1CntGrpEntry 6 } dsx1AlmCnfGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF Dsx1AlmCnfGrpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The DS1 interface alarm configuration table." ::= { dsx1AlmCnfGrp 1 } dsx1AlmCnfGrpEntry OBJECT-TYPE SYNTAX Dsx1AlmCnfGrpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the DS1 Alarm Configuration table." INDEX { almCnfLineNum } ::= { dsx1AlmCnfGrpTable 1 } Dsx1AlmCnfGrpEntry ::= SEQUENCE { almCnfLineNum INTEGER, redSeverity INTEGER, rAISeverity INTEGER, nEAlarmUpCount INTEGER, nEAlarmDownCount INTEGER, nEAlarmThreshold INTEGER, fEAlarmUpCount INTEGER, fEAlarmDownCount INTEGER, fEAlarmThreshold INTEGER, statisticalAlarmSeverity INTEGER, lCV15MinThreshold INTEGER, lCV24HrThreshold INTEGER, lES15MinThreshold INTEGER, lES24HrThreshold INTEGER, lSES15MinThreshold INTEGER, lSES24HrThreshold INTEGER, cRC15MinThreshold INTEGER, cRC24HrThreshold INTEGER, cRCES15MinThreshold INTEGER, cRCES24HrThreshold INTEGER, cRCSES15MinThreshold INTEGER, cRCSES24HrThreshold INTEGER, sEFS15MinThreshold INTEGER, sEFS24HrThreshold INTEGER, aISS15MinThreshold INTEGER, aISS24HrThreshold INTEGER, uAS15MinThreshold INTEGER, uAS24HrThreshold INTEGER } almCnfLineNum OBJECT-TYPE SYNTAX INTEGER(1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the DS1/E1 interface. The value for this object must be same as the value of lineNum from dsx1CnfGrpTable." ::= { dsx1AlmCnfGrpEntry 1 } redSeverity OBJECT-TYPE SYNTAX INTEGER { minor(1), major(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used to setup the severity of RED alarm. So when RED alarm is detected by the card, an alarm with appropriate severity status will be sent." DEFVAL { major } ::= { dsx1AlmCnfGrpEntry 2 } rAISeverity OBJECT-TYPE SYNTAX INTEGER { minor(1), major(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used to setup the severity of RAI alarm. So when LOS alarm is detected the card, an alarm with appropriate severity status will be sent." DEFVAL { minor } ::= { dsx1AlmCnfGrpEntry 3 } nEAlarmUpCount OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter specifies the integration counter, the local alarms are LOS and LOF. Default value is 6 and update counter every 10 ms to reach the threshold set in threshold object. This is the up counter." DEFVAL { 6 } ::= { dsx1AlmCnfGrpEntry 4 } nEAlarmDownCount OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter specifies the integration counter, the Near-End alarms are LOS and LOF. Default value is 1 and update counter every 10 ms to reach 0. This is the down counter." DEFVAL { 1 } ::= { dsx1AlmCnfGrpEntry 5 } nEAlarmThreshold OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The value set in this object determines the value to declare Near-End alarm. A count of 1500 gives 2.5 sec to declare LOS with an up count value of 6." DEFVAL { 1500 } ::= { dsx1AlmCnfGrpEntry 6 } fEAlarmUpCount OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter specifies the integration counter, the Far-End alarms are AIS and YEL. Default value is 6 and update counter 10 ms to reach the threshold set in threshold object. This is the up counter." DEFVAL { 6 } ::= { dsx1AlmCnfGrpEntry 7 } fEAlarmDownCount OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter specifies the integration counter, the Far-End alarms are AIS and YEL. Default value is 1 and update counter every 10 ms to reach 0. This is the down counter." DEFVAL { 1 } ::= { dsx1AlmCnfGrpEntry 8 } fEAlarmThreshold OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The value set in this object determines the value to declare Far-End alarm. A count of 1500 gives 2.5 secs to declare LOS with an up count value of 6." DEFVAL { 1500 } ::= { dsx1AlmCnfGrpEntry 9 } statisticalAlarmSeverity OBJECT-TYPE SYNTAX INTEGER { minor(1), major(2), inhibit(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used to setup the severity of Statistical alarm. So when any statistical alarm is detected by the card, an alarm with appropriate severity status will be sent." ::= { dsx1AlmCnfGrpEntry 10 } lCV15MinThreshold OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "Code Violation - is the occurrence of a received CRC-6 code that is not identical to the corresponding locally. calculated code. The value set in this object determines the value which when exceeded in a 15 minute window causes a statistical alarm to be declared." DEFVAL { 14 } ::= { dsx1AlmCnfGrpEntry 11 } lCV24HrThreshold OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "Code Violation - is the occurence of a received CRC-6 code that is not identical to the corresponding locally. The value set in this object determines the value which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is checked every 15 minutes for the preceding 24 hour interval" DEFVAL { 134 } ::= { dsx1AlmCnfGrpEntry 12 } lES15MinThreshold OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "Errored Second - is any second with at least one code violation. The value set in this object determines the value which when exceeded in a 15 minute window causes a statistical alarm to be declared." DEFVAL { 12 } ::= { dsx1AlmCnfGrpEntry 13 } lES24HrThreshold OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "Errored Second - is any second with at least one code violation. The value set in this object determines the value which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is checked every 15 minutes for the preceding 24 hour interval" DEFVAL { 121 } ::= { dsx1AlmCnfGrpEntry 14 } lSES15MinThreshold OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "Severely Errored Second - is any second with 15 or more code violations. The value set in this object determines the value which when exceeded in a 15 minute window causes a statistical alarm to be declared." DEFVAL { 10 } ::= { dsx1AlmCnfGrpEntry 15 } lSES24HrThreshold OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "Severely Errored Second - is any second with 15 or more code violations. The value set in this object determines the value which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is checked every 15 minutes for the preceding 24 hour interval" DEFVAL { 100 } ::= { dsx1AlmCnfGrpEntry 16 } cRC15MinThreshold OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The value set in this object determines the value which when exceeded in a 15 minute window causes a statistical alarm to be declared." DEFVAL { 14 } ::= { dsx1AlmCnfGrpEntry 17 } cRC24HrThreshold OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The value set in this object determines the value which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is checked every 15 minutes for the preceding 24 hour interval" DEFVAL { 134 } ::= { dsx1AlmCnfGrpEntry 18 } cRCES15MinThreshold OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The value set in this object determines the value which when exceeded in a 15 minute window causes a statistical alarm to be declared." DEFVAL { 12 } ::= { dsx1AlmCnfGrpEntry 19 } cRCES24HrThreshold OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The value set in this object determines the value which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is checked every 15 minutes for the preceding 24 hour interval" DEFVAL { 121 } ::= { dsx1AlmCnfGrpEntry 20 } cRCSES15MinThreshold OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The value set in this object determines the value which when exceeded in a 15 minute window causes a statistical alarm to be declared." DEFVAL { 10 } ::= { dsx1AlmCnfGrpEntry 21 } cRCSES24HrThreshold OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The value set in this object determines the value when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is checked every 15 minutes for the preceding 24 hour interval" DEFVAL { 100 } ::= { dsx1AlmCnfGrpEntry 22 } sEFS15MinThreshold OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "Severely Errored Framing Second - is a count of one-second intervals containing one or more SEF events. The value set in this object determines the value which when exceeded in a 15 minute window causes a statistical alarm to be declared." DEFVAL { 2 } ::= { dsx1AlmCnfGrpEntry 23 } sEFS24HrThreshold OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "Severely Errored Framing Second - is a count of one-second intervals containing one or more SEF events. The value set in this object determines the value which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is checked every 15 minutes for the preceding 24 hour interval" DEFVAL { 17 } ::= { dsx1AlmCnfGrpEntry 24 } aISS15MinThreshold OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "Alarm Indication Signal Second - is a count of one-second intervals containing one or more incoming AIS. The value set in this object determines the value which when exceeded in a 15 minute window causes a statistical alarm to be declared." DEFVAL { 2 } ::= { dsx1AlmCnfGrpEntry 25 } aISS24HrThreshold OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "Alarm Indication Signal Second - is a count of one-second intervals containing one or more incoming AIS. The value set in this object determines the value which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is checked every 15 minutes for the preceding 24 hour interval" DEFVAL { 17 } ::= { dsx1AlmCnfGrpEntry 26 } uAS15MinThreshold OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "Unavailable Second - is a count of seconds during which the DS1 Layer service is unavailable. The value set in this object determines the value which when exceeded in a 15 minute window causes a statistical alarm to be declared." DEFVAL { 10 } ::= { dsx1AlmCnfGrpEntry 27 } uAS24HrThreshold OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "Unavailable Second - is a count of seconds during which the DS1 Layer service is unavailable. The value set in this object determines the value which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is checked every 15 minutes for the preceding 24 hour interval" DEFVAL { 10 } ::= { dsx1AlmCnfGrpEntry 28 } dsx1AlmGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF Dsx1AlmGrpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The DS1 interface alarm configuration table." ::= { dsx1AlmGrp 1 } dsx1AlmGrpEntry OBJECT-TYPE SYNTAX Dsx1AlmGrpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the DS1 Alarm table. Each entry represents the current, 15 minute and 24 Hour bucket intervals for different performance parameters." INDEX { almLineNum } ::= { dsx1AlmGrpTable 1 } Dsx1AlmGrpEntry ::= SEQUENCE { almLineNum INTEGER, lineAlarmState INTEGER, lineStatisticalAlarmState INTEGER, lCVCurrent Counter, lCV15MinBucket Counter, lCV24HrBucket Counter, lESCurrent Counter, lES15MinBucket Counter, lES24HrBucket Counter, lSESCurrent Counter, lSES15MinBucket Counter, lSES24HrBucket Counter, cRCCurrent Counter, cRC15MinBucket Counter, cRC24HrBucket Counter, cRCESCurrent Counter, cRCES15MinBucket Counter, cRCES24HrBucket Counter, cRCSESCurrent Counter, cRCSES15MinBucket Counter, cRCSES24HrBucket Counter, sEFSCurrent Counter, sEFS15MinBucket Counter, sEFS24HrBucket Counter, aISSCurrent Counter, aISS15MinBucket Counter, aISS24HrBucket Counter, uASCurrent Counter, uAS15MinBucket Counter, uAS24HrBucket Counter, percentEFS INTEGER, alarmClrButton INTEGER } almLineNum OBJECT-TYPE SYNTAX INTEGER(1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the DS1/E1 interface. The value for this object must be same as the value of lineNum from dsx1CnfGrpTable." ::= { dsx1AlmGrpEntry 1 } lineAlarmState OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This variable is a bitmap of the DSX1 Line Alarms. A value of zero indicates no alarms. Itemized below are the individual bits: BitPosition Alarm ----------- ----- 0 Receiving RAI 1 Transmitting RAI 2 Receiving AIS 3 Transmitting AIS 4 Receiving OOF 5 Receiving LOS 6 Near End Local Loopback in effect 7 Near End Remote Loopback in effect 8 Near End Remote Payload Loopback 9 Receiving CRC MF OOF (E1) 10 Receiving Sig MF OOF (E1) 11 Receiving MF RAI (E1) 12 Receiving MF AIS (E1) 13 BERT in effect 14 Far End Remote Loopback in effect 15 Detected Near End Remote Loopback in effect" ::= { dsx1AlmGrpEntry 2 } lineStatisticalAlarmState OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This variable is a bitmap of the DSX1 Line Statistical Alarms. A value of zero indicates no alarms. Itemized below are the individual alarm bits: BitPosition Alarm ----------- ----- 0 LCV 15 minute threshold exceeded 1 LCV 24 hour threshold exceeded 2 LES 15 minute threshold exceeded 3 LES 24 hour threshold exceeded 4 LSES 15 minute threshold exceeded 5 LSES 24 hour threshold exceeded 6 CRC 15 minute threshold exceeded 7 CRC 24 hour threshold exceeded 8 CRCES 15 minute threshold exceeded 9 CRCES 24 hour threshold exceeded 10 CRCSES 15 minute threshold exceeded 11 CRCSES 24 hour threshold exceeded 12 SEFS 15 minute threshold exceeded 13 SEFS 24 hour threshold exceeded 14 AISS 15 minute threshold exceeded 15 AISS 24 hour threshold exceeded 16 UAS 15 minute threshold exceeded 17 UAS 24 hour threshold exceeded." ::= { dsx1AlmGrpEntry 3 } lCVCurrent OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This counter counts the number of Line code violations encountered by the interface." ::= { dsx1AlmGrpEntry 4 } lCV15MinBucket OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Line code violations in the last 15 minute period encountered by the interface." ::= { dsx1AlmGrpEntry 5 } lCV24HrBucket OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Line code violations in the last 24 hour period encountered by the interface." ::= { dsx1AlmGrpEntry 6 } lESCurrent OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This counter counts the number of Line code violations Errored Seconds encountered by the interface." ::= { dsx1AlmGrpEntry 7 } lES15MinBucket OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This counter counts the number of Line code violations Errored Seconds in the last 15 minutes encountered by the interface." ::= { dsx1AlmGrpEntry 8 } lES24HrBucket OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This counter counts the number of Line code violations Errored Seconds in the last 24 hours encountered by the interface." ::= { dsx1AlmGrpEntry 9 } lSESCurrent OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This counter counts the number of Line code violations Severely Errored Seconds encountered by the interface." ::= { dsx1AlmGrpEntry 10 } lSES15MinBucket OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This counter counts the number of LCV Severely Errored Seconds in the last 15 minutes encountered by the interface." ::= { dsx1AlmGrpEntry 11 } lSES24HrBucket OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This counter counts the number of LCV Severely Errored Seconds in the last 24 hours encountered by the interface." ::= { dsx1AlmGrpEntry 12 } cRCCurrent OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This counter counts the number of P Bit code violations encountered by the interface." ::= { dsx1AlmGrpEntry 13 } cRC15MinBucket OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This counter counts the number of P Bit code violations in the last 15 minutes encountered by the interface." ::= { dsx1AlmGrpEntry 14 } cRC24HrBucket OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This counter counts the number of P Bit code violations in the last 24 hours encountered by the interface." ::= { dsx1AlmGrpEntry 15 } cRCESCurrent OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This counter counts the number of PCV Errored Seconds encountered by the interface." ::= { dsx1AlmGrpEntry 16 } cRCES15MinBucket OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This counter counts the number of PCV Errored Seconds in the last 15 minutes encountered by the interface." ::= { dsx1AlmGrpEntry 17 } cRCES24HrBucket OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This counter counts the number of PCV Errored Seconds in the last 24 hours encountered by the interface." ::= { dsx1AlmGrpEntry 18 } cRCSESCurrent OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This counter counts the number of P Bit code violations Severely Errored Seconds encountered by the interface." ::= { dsx1AlmGrpEntry 19 } cRCSES15MinBucket OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This counter counts the number of PCV Severely Errored Seconds in the last 15 minutes encountered by the interface." ::= { dsx1AlmGrpEntry 20 } cRCSES24HrBucket OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This counter counts the number of PCV Severely Errored Seconds in the last 24 hours encountered by the interface." ::= { dsx1AlmGrpEntry 21 } sEFSCurrent OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This counter counts the number of Severely Errored Framing Seconds encountered by the interface." ::= { dsx1AlmGrpEntry 22 } sEFS15MinBucket OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This counter counts the number of Severely Errored Framing Seconds in the last 15 minutes encountered by the interface." ::= { dsx1AlmGrpEntry 23 } sEFS24HrBucket OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This counter counts the number of Severely Errored Framing Seconds in the last 24 hours encountered by the interface." ::= { dsx1AlmGrpEntry 24 } aISSCurrent OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This counter counts the number of AIS Severely Errored Seconds encountered by the interface." ::= { dsx1AlmGrpEntry 25 } aISS15MinBucket OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This counter counts the number of AIS Severely Errored Seconds in the last 15 minutes encountered by the interface." ::= { dsx1AlmGrpEntry 26 } aISS24HrBucket OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This counter counts the number of AIS Severely Errored Seconds in the last 24 hours encountered by the interface." ::= { dsx1AlmGrpEntry 27 } uASCurrent OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This counter counts the number of Unavailable Seconds encountered by the interface." ::= { dsx1AlmGrpEntry 28 } uAS15MinBucket OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This counter counts the number of Unavailable Seconds in the last 15 minutes encountered by the interface." ::= { dsx1AlmGrpEntry 29 } uAS24HrBucket OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This counter counts the number of Unavailable Seconds in the last 24 hours encountered by the interface." ::= { dsx1AlmGrpEntry 30 } percentEFS OBJECT-TYPE SYNTAX INTEGER(0..100) ACCESS read-only STATUS mandatory DESCRIPTION "This counter counts the %LCV Error Free Seconds." ::= { dsx1AlmGrpEntry 31 } alarmClrButton OBJECT-TYPE SYNTAX INTEGER { noaction(1), clear(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used to clear all the alarms for the line. 1 = No action 2 = Clear alarm" ::= { dsx1AlmGrpEntry 32 } cmDsx1GeneralGroup OBJECT IDENTIFIER ::= { cmDsx1MIBGroups 1 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- The collection of objects used for -- DS1/E1 interfaces. -- objects -- lineNumofValidEntries cmDsx1ConfGroup OBJECT IDENTIFIER ::= { cmDsx1MIBGroups 2 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- The collection of objects used for -- DS1/E1 interface configuration. -- objects -- lineNum, lineConnectorType, lineEnable, lineType, lineCoding, -- lineLength, lineXmtClockSource, lineLoopbackCommand, -- lineSendCode, lineLoopbackCodeDetection, -- lineUsedTimeslotsBitMap, lineBERTEnable, lineBERTPattern, -- lineBERTResult, bERTResultClrButton cmDsx1CountGroup OBJECT IDENTIFIER ::= { cmDsx1MIBGroups 3 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- The collection of objects related to -- DS1/E1 statistics. -- objects -- cntLineNum, rcvLOSCount, rcvOOFCount, rcvRAICount, rcvFECount, -- counterClearButton cmDsx1AlarmConfGroup OBJECT IDENTIFIER ::= { cmDsx1MIBGroups 4 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- The collection of objects used for -- DS1/E1 Alarm threshold configuration. -- objects -- almCnfLineNum, redSeverity, rAISeverity, nEAlarmUpCount, -- nEAlarmDownCount, nEAlarmThreshold, fEAlarmUpCount, -- fEAlarmDownCount, fEAlarmThreshold, statisticalAlarmSeverity, -- lCV15MinThreshold, lCV24HrThreshold, lES15MinThreshold, -- lES24HrThreshold, lSES15MinThreshold, lSES24HrThreshold, -- cRC15MinThreshold, cRC24HrThreshold, cRCES15MinThreshold, -- cRCES24HrThreshold, cRCSES15MinThreshold, cRCSES24HrThreshold, -- sEFS15MinThreshold, sEFS24HrThreshold, aISS15MinThreshold, -- aISS24HrThreshold, uAS15MinThreshold, uAS24HrThreshold cmDsx1AlarmGroup OBJECT IDENTIFIER ::= { cmDsx1MIBGroups 5 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- The collection of objects used for -- DS1/E1 Alarm configuration. -- objects -- almLineNum, lineAlarmState, lineStatisticalAlarmState, -- lCVCurrent, lCV15MinBucket, lCV24HrBucket, lESCurrent, -- lES15MinBucket, lES24HrBucket, lSESCurrent, lSES15MinBucket, -- lSES24HrBucket, cRCCurrent, cRC15MinBucket, cRC24HrBucket, -- cRCESCurrent, cRCES15MinBucket, cRCES24HrBucket, -- cRCSESCurrent, cRCSES15MinBucket, cRCSES24HrBucket, -- sEFSCurrent, sEFS15MinBucket, sEFS24HrBucket, aISSCurrent, -- aISS15MinBucket, aISS24HrBucket, uASCurrent, uAS15MinBucket, -- uAS24HrBucket, percentEFS, alarmClrButton cmDsx1Compliance OBJECT IDENTIFIER ::= { cmDsx1MIBCompliances 1 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- The compliance statement for objects related -- to DS1/E1 mib. -- Module -- >>current<< -- MandGroup -- cmDsx1GeneralGroup -- MandGroup -- cmDsx1ConfGroup -- MandGroup -- cmDsx1CountGroup -- MandGroup -- cmDsx1AlarmConfGroup -- MandGroup -- cmDsx1AlarmGroup END