-- MIB file created 13-Aug-2004 11:24:23, by
--   SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com

CISCO-MVPN-MIB DEFINITIONS ::= BEGIN

-- From file: "CISCO-MVPN-MIB.my"
-- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T"

IMPORTS
    TruthValue, RowStatus, TimeStamp, DisplayString, TimeInterval
            FROM SNMPv2-TC-v1
    ciscoExperiment
            FROM CISCO-SMI
    ifIndex
            FROM IF-MIB
    SnmpAdminString
            FROM SNMP-FRAMEWORK-MIB
    InetAddress, InetAddressType
            FROM INET-ADDRESS-MIB
    mplsVpnVrfName, MplsVpnRouteDistinguisher
            FROM MPLS-VPN-MIB
    Gauge
            FROM RFC1155-SMI
    OBJECT-TYPE
            FROM RFC-1212
    TRAP-TYPE
            FROM RFC-1215;

ciscoMvpnMIB OBJECT IDENTIFIER ::= { ciscoExperiment 113 }
-- MODULE-IDENTITY
--  LastUpdated
--    200402231200Z
--  OrgName
--    Cisco Systems, Inc.
--  ContactInfo
--     Cisco Systems, Inc.
--      170 Tasman Drive
--      San Jose, CA 95134
--      USA
--    
--      Tel: +1 800 553-NETS
--    
--      EMail: cs-ipmulticast@cisco.com
--  Descr
--    This MIB contains managed object definitions for
--     Cisco implementation of multicast in VPNs defined 
--     by the Internet draft: draft-rosen-vpn-mcast-05.txt. 
--     Note that this MIB works along with the 
--     L3VPN-MPLS-VPN-MIB.
--  RevDate
--    200402231200Z
--  RevDescr
--    Initial version.

ciscoMvpnNotifications OBJECT IDENTIFIER ::= { ciscoMvpnMIB 0 }
ciscoMvpnObjects OBJECT IDENTIFIER ::= { ciscoMvpnMIB 1 }
ciscoMvpnScalars OBJECT IDENTIFIER ::= { ciscoMvpnObjects 1 }
ciscoMvpnGeneric OBJECT IDENTIFIER ::= { ciscoMvpnObjects 2 }
ciscoMvpnConfig OBJECT IDENTIFIER ::= { ciscoMvpnObjects 3 }
ciscoMvpnProtocol OBJECT IDENTIFIER ::= { ciscoMvpnObjects 4 }
ciscoMvpnConformance OBJECT IDENTIFIER ::= { ciscoMvpnMIB 2 }
ciscoMvpnGroups OBJECT IDENTIFIER ::= { ciscoMvpnConformance 1 }
ciscoMvpnCompliances OBJECT IDENTIFIER ::= { ciscoMvpnConformance 2 }

ciscoMvpnMvrfNumber OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of MVRFs that are present in this device."
    ::= { ciscoMvpnScalars 1 }

ciscoMvpnNotificationEnable OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "If this object is TRUE, then the generation of 
         all notifications defined in this MIB is enabled."
    DEFVAL { false }
    ::= { ciscoMvpnScalars 2 }

ciscoMvpnGenericTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CiscoMvpnGenericEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table gives the generic information about the MVRFs 
         present in this device."
    ::= { ciscoMvpnGeneric 1 }

ciscoMvpnGenericEntry OBJECT-TYPE
    SYNTAX CiscoMvpnGenericEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry in this table is created for every MVRF in the 
         device. 
         Note that many implementations may have MVRF for global 
         VRF (VRF0) by default in the device.
         Also note that existence of the correspoding VRF in 
         L3VPN-MPLS-VPN-MIB is necessary for a row to exist in
         this table. Deletion of corresponding VRF in 
         L3VPN-MPLS-VPN-MIB also results in deletion of a row here. 
         But deletion of a row ie deletion of a MVRF here does not 
         result in the deletion of the corresponding VRF in 
         L3VPN-MPLS-VPN-MIB."
    INDEX { mplsVpnVrfName }
    ::= { ciscoMvpnGenericTable 1 }

CiscoMvpnGenericEntry ::= SEQUENCE {
    ciscoMvpnGenOperStatusChange INTEGER,
    ciscoMvpnGenOperChangeTime TimeStamp,
    ciscoMvpnGenAssociatedInterfaces Gauge,
    ciscoMvpnGenRowStatus RowStatus
    }

ciscoMvpnGenOperStatusChange OBJECT-TYPE
    SYNTAX INTEGER {
        createdMvrf(1),
        deletedMvrf(2),
        modifiedMvrfDefMdtConfig(3),
        modifiedMvrfDataMdtConfig(4)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object describes the last operational change that
         happened for the given MVRF. 
        
         createdMvrf - indicates that the MVRF was created in the 
         device.
        
         deletedMvrf - indicates that the MVRF was deleted from 
         the device. A row in this table will never have 
         ciscoMvpnGenOperStatusChange equal to deletedMvrf(2),
         because in that case the row itself will be deleted 
         from the table. This value for 
         ciscoMvpnGenOperStatusChange is defined mainly for use 
         in ciscoMvpnMvrfChange notification.
        
         modifiedMvrfDefMdtConfig - indicates that the default MDT 
         group for the MVRF was configured, deleted or changed.
        
         modifiedMvrfDataMdtConfig - indicates that the data MDT 
         group range or a associated variable (like the threshold) 
         for the MVRF was configured, deleted or changed."
    DEFVAL { createdMvrf }
    ::= { ciscoMvpnGenericEntry 1 }

ciscoMvpnGenOperChangeTime OBJECT-TYPE
    SYNTAX TimeStamp
--    Rsyntax TimeTicks
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The time at which the last operational change for the 
         MVRF in question took place. The last operational change
         is specified by ciscoMvpnGenOperStatusChange."
    ::= { ciscoMvpnGenericEntry 2 }

ciscoMvpnGenAssociatedInterfaces OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Total number of interfaces associated with this MVRF (including
         the MDT tunnel interface) with ifOperStatus = up(1)."
    ::= { ciscoMvpnGenericEntry 3 }

ciscoMvpnGenRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This variable is used to create or delete a row in this table."
    ::= { ciscoMvpnGenericEntry 4 }

ciscoMvpnMdtDefaultTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CiscoMvpnMdtDefaultEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table specifies the default MDT address and the 
         encapsulation type used for a MVRF instance."
    ::= { ciscoMvpnConfig 1 }

ciscoMvpnMdtDefaultEntry OBJECT-TYPE
    SYNTAX CiscoMvpnMdtDefaultEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry in this table is created for every MVRF for which 
         a default MDT group is configured. A MVRF which does not 
         have a default MDT group configured will not appear in 
         this table.
         Creation of a row in this table is the equivalent of 
         configuring default MDT address for the given MVRF. 
         Deletion of a row in this table is the equivalent of 
         deconfiguring default MDT address for the given MVRF."
    INDEX { mplsVpnVrfName }
    ::= { ciscoMvpnMdtDefaultTable 1 }

CiscoMvpnMdtDefaultEntry ::= SEQUENCE {
    ciscoMvpnMdtDefaultAddrType InetAddressType,
    ciscoMvpnMdtDefaultAddress InetAddress,
    ciscoMvpnMdtEncapsType INTEGER,
    ciscoMvpnMdtDefaultRowStatus RowStatus
    }

ciscoMvpnMdtDefaultAddrType OBJECT-TYPE
    SYNTAX InetAddressType
--    Rsyntax INTEGER {
--        ?? enum value of zero may cause problems
--        unknown(0),
--        ipv4(1),
--        ipv6(2),
--        ipv4z(3),
--        ipv6z(4),
--        dns(16)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The Internet address type of ciscoMvpnMdtDefaultAddress."
    ::= { ciscoMvpnMdtDefaultEntry 1 }

ciscoMvpnMdtDefaultAddress OBJECT-TYPE
    SYNTAX InetAddress
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The default MDT address to be used for the MVRF in question."
    ::= { ciscoMvpnMdtDefaultEntry 2 }

ciscoMvpnMdtEncapsType OBJECT-TYPE
    SYNTAX INTEGER {
        greIp(1),
        ipIp(2),
        mpls(3)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The encapsulation type to be used in the MVRF in question."
    ::= { ciscoMvpnMdtDefaultEntry 3 }

ciscoMvpnMdtDefaultRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This variable is used to create, modify or delete a 
         row in this table."
    ::= { ciscoMvpnMdtDefaultEntry 4 }

ciscoMvpnMdtDataTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CiscoMvpnMdtDataEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table specifies the range of data MDT addresses and 
         associated variables for a MVRF instance."
    ::= { ciscoMvpnConfig 2 }

ciscoMvpnMdtDataEntry OBJECT-TYPE
    SYNTAX CiscoMvpnMdtDataEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry in this table is created for every MVRF for which 
         a data MDT group range is configured. A MVRF which does
         not have a data MDT group range configured will not appear
         in this table. 
         Creation of a row in this table is the equivalent of 
         configuring data MDT addresses for the given MVRF. Deletion 
         of a row in this table is the equivalent of deconfiguring 
         data MDT address usage in the given MVRF. 
        
         Note that ciscoMvpnMdtDefaultEntry for a MVRF should be 
         present in the device before ciscoMvpnMdtDataEntry for 
         that MVRF can be created."
    INDEX { mplsVpnVrfName }
    ::= { ciscoMvpnMdtDataTable 1 }

CiscoMvpnMdtDataEntry ::= SEQUENCE {
    ciscoMvpnMdtDataRangeAddrType InetAddressType,
    ciscoMvpnMdtDataRangeAddress InetAddress,
    ciscoMvpnMdtDataWildcardType InetAddressType,
    ciscoMvpnMdtDataWildcardBits InetAddress,
    ciscoMvpnMdtDataThreshold Gauge,
    ciscoMvpnMdtDataRowStatus RowStatus
    }

ciscoMvpnMdtDataRangeAddrType OBJECT-TYPE
    SYNTAX InetAddressType
--    Rsyntax INTEGER {
--        ?? enum value of zero may cause problems
--        unknown(0),
--        ipv4(1),
--        ipv6(2),
--        ipv4z(3),
--        ipv6z(4),
--        dns(16)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The Internet address type of ciscoMvpnMdtDataRangeAddress."
    ::= { ciscoMvpnMdtDataEntry 1 }

ciscoMvpnMdtDataRangeAddress OBJECT-TYPE
    SYNTAX InetAddress
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The data MDT group range address for the given MVRF. 
         This along with ciscoMvpnMdtDataWildcardBits gives the 
         pool of data MDT addresses that can be used for
         encapsulation in the MVRF upon data MDT switchover."
    ::= { ciscoMvpnMdtDataEntry 2 }

ciscoMvpnMdtDataWildcardType OBJECT-TYPE
    SYNTAX InetAddressType
--    Rsyntax INTEGER {
--        ?? enum value of zero may cause problems
--        unknown(0),
--        ipv4(1),
--        ipv6(2),
--        ipv4z(3),
--        ipv6z(4),
--        dns(16)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The Internet address type of ciscoMvpnMdtDataWildcardBits."
    ::= { ciscoMvpnMdtDataEntry 3 }

ciscoMvpnMdtDataWildcardBits OBJECT-TYPE
    SYNTAX InetAddress
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Wildcard bits which when used along with data MDT range 
         address, give a pool of addresses to be used in a MVRF.
        
         For example, if ciscoMvpnMdtDataRangeAddress is 239.1.2.0 
         and ciscoMvpnMdtDataWildcardBits is 0.0.0.3, the possible 
         data MDT addresses are 239.1.2.0, 239.1.2.1, 239.1.2.2 
         and 239.1.2.3.
        
         Note that wild card bits should be right contiguous."
    ::= { ciscoMvpnMdtDataEntry 4 }

ciscoMvpnMdtDataThreshold OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
--  Units
--    kilobits per second
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The bandwidth threshold value which when exceeded for a 
         multicast routing entry in the given MVRF, triggers usage 
         of data MDT address instead of default MDT address for 
         encapsulation."
    ::= { ciscoMvpnMdtDataEntry 5 }

ciscoMvpnMdtDataRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This variable is used to create, modify or delete a 
         row in this table."
    ::= { ciscoMvpnMdtDataEntry 6 }

ciscoMvpnMrouteMdtTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CiscoMvpnMrouteMdtEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Given a multicast routing entry and the context MVRF, this 
         table provides information about the MDT group being used for 
         encapsulating the traffic for the multicast routing entry in 
         the provider network at the instance of querying. Note that
         this table is a read-only table and is the result of the 
         default MDT and data MDT configurations and the operational 
         conditions like the traffic rate and sometimes, the 
         implementation choices."
    ::= { ciscoMvpnProtocol 1 }

ciscoMvpnMrouteMdtEntry OBJECT-TYPE
    SYNTAX CiscoMvpnMrouteMdtEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry in this table exists for a multicast routing entry 
         the traffic for which is being encapsulated in a context 
         MVRF."
    INDEX { mplsVpnVrfName, ciscoMvpnMrouteMvrfGrpAddrType, ciscoMvpnMrouteMvrfGroup, ciscoMvpnMrouteMvrfSrcAddrType, ciscoMvpnMrouteMvrfSource, ciscoMvpnMrouteUpDownStreamInfo }
    ::= { ciscoMvpnMrouteMdtTable 1 }

CiscoMvpnMrouteMdtEntry ::= SEQUENCE {
    ciscoMvpnMrouteMvrfGrpAddrType InetAddressType,
    ciscoMvpnMrouteMvrfGroup InetAddress,
    ciscoMvpnMrouteMvrfSrcAddrType InetAddressType,
    ciscoMvpnMrouteMvrfSource InetAddress,
    ciscoMvpnMrouteUpDownStreamInfo INTEGER,
    ciscoMvpnMrouteMdtGrpAddrType InetAddressType,
    ciscoMvpnMrouteMdtGroup InetAddress,
    ciscoMvpnMrouteMdtType INTEGER
    }

ciscoMvpnMrouteMvrfGrpAddrType OBJECT-TYPE
    SYNTAX InetAddressType
--    Rsyntax INTEGER {
--        ?? enum value of zero may cause problems
--        unknown(0),
--        ipv4(1),
--        ipv6(2),
--        ipv4z(3),
--        ipv6z(4),
--        dns(16)
--        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The Internet address type of ciscoMvpnMrouteMvrfGroup."
    ::= { ciscoMvpnMrouteMdtEntry 1 }

ciscoMvpnMrouteMvrfGroup OBJECT-TYPE
    SYNTAX InetAddress(SIZE(4|16|20))
--    Rsyntax OCTET STRING(SIZE(4|16|20))
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Group adddress of multicast routing entry in question."
    ::= { ciscoMvpnMrouteMdtEntry 2 }

ciscoMvpnMrouteMvrfSrcAddrType OBJECT-TYPE
    SYNTAX InetAddressType
--    Rsyntax INTEGER {
--        ?? enum value of zero may cause problems
--        unknown(0),
--        ipv4(1),
--        ipv6(2),
--        ipv4z(3),
--        ipv6z(4),
--        dns(16)
--        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The Internet address type of ciscoMvpnMrouteMvrfSource."
    ::= { ciscoMvpnMrouteMdtEntry 3 }

ciscoMvpnMrouteMvrfSource OBJECT-TYPE
    SYNTAX InetAddress(SIZE(4|16|20))
--    Rsyntax OCTET STRING(SIZE(4|16|20))
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Source adddress of the multicast routing entry in question."
    ::= { ciscoMvpnMrouteMdtEntry 4 }

ciscoMvpnMrouteUpDownStreamInfo OBJECT-TYPE
    SYNTAX INTEGER {
        upstream(1),
        downstream(2)
        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Indicates if this PE is the upstream (sending) or the 
         downstream (receiving) router for the multicast routing entry 
         specified by ciscoMvpnMrouteMvrfSource and 
         ciscoMvpnMrouteMvrfGroup in the context MVRF specified by 
         mplsVpnVrfName.
         Note that there may be two rows for the same multicast 
         routing entry if the traffic is bi-directional, one row 
         for PE as an upstream router the other for PE as the 
         downstream router."
    ::= { ciscoMvpnMrouteMdtEntry 5 }

ciscoMvpnMrouteMdtGrpAddrType OBJECT-TYPE
    SYNTAX InetAddressType
--    Rsyntax INTEGER {
--        ?? enum value of zero may cause problems
--        unknown(0),
--        ipv4(1),
--        ipv6(2),
--        ipv4z(3),
--        ipv6z(4),
--        dns(16)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The Internet address type of ciscoMvpnMrouteMdtGroup."
    ::= { ciscoMvpnMrouteMdtEntry 6 }

ciscoMvpnMrouteMdtGroup OBJECT-TYPE
    SYNTAX InetAddress
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "MDT group address used to encapsulate the multicast routing 
         entry specified by ciscoMvpnMrouteMvrfSource and 
         ciscoMvpnMrouteMvrfGroup in the context MVRF specified by 
         mplsVpnVrfName."
    ::= { ciscoMvpnMrouteMdtEntry 7 }

ciscoMvpnMrouteMdtType OBJECT-TYPE
    SYNTAX INTEGER {
        mdtDefault(1),
        mdtData(2)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the type of MDT group used for encapsulation."
    ::= { ciscoMvpnMrouteMdtEntry 8 }

ciscoMvpnBgpMdtUpdateTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CiscoMvpnBgpMdtUpdateEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table has information about the BGP advertisement of the 
         the MDT groups. (These advertisements are generated 
         and used for source discovery when SSM is used.)"
    ::= { ciscoMvpnProtocol 2 }

ciscoMvpnBgpMdtUpdateEntry OBJECT-TYPE
    SYNTAX CiscoMvpnBgpMdtUpdateEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry in this table is created when a BGP advertisement of 
         the MDT group is received and cached in the PE device. 
         An entry in this table deleted when such a cached BGP MDT 
         update is withdrawn."
    INDEX { ciscoMvpnBgpMdtUpdGrpAddrType, ciscoMvpnBgpMdtUpdateGroup, ciscoMvpnBgpMdtUpdSrcAddrType, ciscoMvpnBgpMdtUpdateSource }
    ::= { ciscoMvpnBgpMdtUpdateTable 1 }

CiscoMvpnBgpMdtUpdateEntry ::= SEQUENCE {
    ciscoMvpnBgpMdtUpdGrpAddrType InetAddressType,
    ciscoMvpnBgpMdtUpdateGroup InetAddress,
    ciscoMvpnBgpMdtUpdateRd MplsVpnRouteDistinguisher,
    ciscoMvpnBgpMdtUpdSrcAddrType InetAddressType,
    ciscoMvpnBgpMdtUpdateSource InetAddress,
    ciscoMvpnBgpMdtUpdOrigAddrType InetAddressType,
    ciscoMvpnBgpMdtUpdateOriginator InetAddress,
    ciscoMvpnBgpMdtUpdNhAddrType InetAddressType,
    ciscoMvpnBgpMdtUpdateNexthop InetAddress
    }

ciscoMvpnBgpMdtUpdGrpAddrType OBJECT-TYPE
    SYNTAX InetAddressType
--    Rsyntax INTEGER {
--        ?? enum value of zero may cause problems
--        unknown(0),
--        ipv4(1),
--        ipv6(2),
--        ipv4z(3),
--        ipv6z(4),
--        dns(16)
--        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The Internet address type of ciscoMvpnBgpMdtUpdateGroup."
    ::= { ciscoMvpnBgpMdtUpdateEntry 1 }

ciscoMvpnBgpMdtUpdateGroup OBJECT-TYPE
    SYNTAX InetAddress(SIZE(4|16|20))
--    Rsyntax OCTET STRING(SIZE(4|16|20))
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "MDT group address in the BGP MDT advertisement."
    ::= { ciscoMvpnBgpMdtUpdateEntry 2 }

ciscoMvpnBgpMdtUpdateRd OBJECT-TYPE
    SYNTAX MplsVpnRouteDistinguisher
--    Rsyntax OCTET STRING(SIZE(0..256))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "RD (route distinguisher) in the BGP MDT advertisement. This 
         is the RD corresponding to the originator PE."
    ::= { ciscoMvpnBgpMdtUpdateEntry 3 }

ciscoMvpnBgpMdtUpdSrcAddrType OBJECT-TYPE
    SYNTAX InetAddressType
--    Rsyntax INTEGER {
--        ?? enum value of zero may cause problems
--        unknown(0),
--        ipv4(1),
--        ipv6(2),
--        ipv4z(3),
--        ipv6z(4),
--        dns(16)
--        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The Internet address type of ciscoMvpnBgpMdtUpdateSource."
    ::= { ciscoMvpnBgpMdtUpdateEntry 4 }

ciscoMvpnBgpMdtUpdateSource OBJECT-TYPE
    SYNTAX InetAddress(SIZE(4|16|20))
--    Rsyntax OCTET STRING(SIZE(4|16|20))
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "MDT source address in the BGP MDT advertisement."
    ::= { ciscoMvpnBgpMdtUpdateEntry 5 }

ciscoMvpnBgpMdtUpdOrigAddrType OBJECT-TYPE
    SYNTAX InetAddressType
--    Rsyntax INTEGER {
--        ?? enum value of zero may cause problems
--        unknown(0),
--        ipv4(1),
--        ipv6(2),
--        ipv4z(3),
--        ipv6z(4),
--        dns(16)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The Internet address type of ciscoMvpnBgpMdtUpdateOriginator."
    ::= { ciscoMvpnBgpMdtUpdateEntry 6 }

ciscoMvpnBgpMdtUpdateOriginator OBJECT-TYPE
    SYNTAX InetAddress
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The BGP peering address of the device that originated (or 
         advertized) the BGP MDT update."
    ::= { ciscoMvpnBgpMdtUpdateEntry 7 }

ciscoMvpnBgpMdtUpdNhAddrType OBJECT-TYPE
    SYNTAX InetAddressType
--    Rsyntax INTEGER {
--        ?? enum value of zero may cause problems
--        unknown(0),
--        ipv4(1),
--        ipv6(2),
--        ipv4z(3),
--        ipv6z(4),
--        dns(16)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The Internet address type of ciscoMvpnBgpMdtUpdateNexthop."
    ::= { ciscoMvpnBgpMdtUpdateEntry 8 }

ciscoMvpnBgpMdtUpdateNexthop OBJECT-TYPE
    SYNTAX InetAddress
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The next-hop address (address of the border router to be
         used to reach the destination network) in the BGP MDT 
         advertisement."
    ::= { ciscoMvpnBgpMdtUpdateEntry 9 }

ciscoMvpnMdtJnRcvTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CiscoMvpnMdtJnRcvEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table has information about the data MDT join TLVs 
         received by a device."
    ::= { ciscoMvpnProtocol 3 }

ciscoMvpnMdtJnRcvEntry OBJECT-TYPE
    SYNTAX CiscoMvpnMdtJnRcvEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry in this table is created or updated for every MDT 
         data join TLV received and cached in the device. The value of 
         mplsVpnVrfName in such an entry specifies the name of the 
         MVRF for which the data MDT groups from the TLVs are used."
    INDEX { mplsVpnVrfName, ciscoMvpnMdtJnRcvGrpAddrType, ciscoMvpnMdtJnRcvGroup, ciscoMvpnMdtJnRcvSrcAddrType, ciscoMvpnMdtJnRcvSource }
    ::= { ciscoMvpnMdtJnRcvTable 1 }

CiscoMvpnMdtJnRcvEntry ::= SEQUENCE {
    ciscoMvpnMdtJnRcvGrpAddrType InetAddressType,
    ciscoMvpnMdtJnRcvGroup InetAddress,
    ciscoMvpnMdtJnRcvSrcAddrType InetAddressType,
    ciscoMvpnMdtJnRcvSource InetAddress,
    ciscoMvpnMdtJnRcvUpTime TimeInterval,
    ciscoMvpnMdtJnRcvExpTime TimeInterval
    }

ciscoMvpnMdtJnRcvGrpAddrType OBJECT-TYPE
    SYNTAX InetAddressType
--    Rsyntax INTEGER {
--        ?? enum value of zero may cause problems
--        unknown(0),
--        ipv4(1),
--        ipv6(2),
--        ipv4z(3),
--        ipv6z(4),
--        dns(16)
--        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The Internet address type of ciscoMvpnMdtJnRcvGroup."
    ::= { ciscoMvpnMdtJnRcvEntry 1 }

ciscoMvpnMdtJnRcvGroup OBJECT-TYPE
    SYNTAX InetAddress(SIZE(4|16|20))
--    Rsyntax OCTET STRING(SIZE(4|16|20))
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Data MDT group address in the MDT join TLV."
    ::= { ciscoMvpnMdtJnRcvEntry 2 }

ciscoMvpnMdtJnRcvSrcAddrType OBJECT-TYPE
    SYNTAX InetAddressType
--    Rsyntax INTEGER {
--        ?? enum value of zero may cause problems
--        unknown(0),
--        ipv4(1),
--        ipv6(2),
--        ipv4z(3),
--        ipv6z(4),
--        dns(16)
--        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The Internet address type of ciscoMvpnMdtJnRcvSource."
    ::= { ciscoMvpnMdtJnRcvEntry 3 }

ciscoMvpnMdtJnRcvSource OBJECT-TYPE
    SYNTAX InetAddress(SIZE(4|16|20))
--    Rsyntax OCTET STRING(SIZE(4|16|20))
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Source address for the MDT multicast routing entry created 
         following the receipt of MDT join TLV."
    ::= { ciscoMvpnMdtJnRcvEntry 4 }

ciscoMvpnMdtJnRcvUpTime OBJECT-TYPE
    SYNTAX TimeInterval
--    Rsyntax INTEGER(0..2147483647)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The time since this MDT join TLV was first received by the 
         device."
    ::= { ciscoMvpnMdtJnRcvEntry 5 }

ciscoMvpnMdtJnRcvExpTime OBJECT-TYPE
    SYNTAX TimeInterval
--    Rsyntax INTEGER(0..2147483647)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The amount of time remaining before the cache corresponding 
         to this MDT join TLV is deleted from the device and the 
         corresponding  MDT multicast routing entry is marked as a 
         non-MDT entry.
         Note that multiple TLVs for a data MDT group may be received 
         by a device. Upon receipt, the expiry timer of an already 
         existing entry is restarted and so ciscoMvpnMdtJnRcvExpTime 
         is updated."
    ::= { ciscoMvpnMdtJnRcvEntry 6 }

ciscoMvpnMdtJnSendTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CiscoMvpnMdtJnSendEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table specifies the data MDT Join TLVs sent by a 
         device."
    ::= { ciscoMvpnProtocol 4 }

ciscoMvpnMdtJnSendEntry OBJECT-TYPE
    SYNTAX CiscoMvpnMdtJnSendEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Entries in this table exist for data MDT Join TLVs that are 
         being sent by this device to other PEs."
    INDEX { mplsVpnVrfName, ciscoMvpnMdtJnSendGrpAddrType, ciscoMvpnMdtJnSendGroup, ciscoMvpnMdtJnSendSrcAddrType, ciscoMvpnMdtJnSendSource }
    ::= { ciscoMvpnMdtJnSendTable 1 }

CiscoMvpnMdtJnSendEntry ::= SEQUENCE {
    ciscoMvpnMdtJnSendGrpAddrType InetAddressType,
    ciscoMvpnMdtJnSendGroup InetAddress,
    ciscoMvpnMdtJnSendSrcAddrType InetAddressType,
    ciscoMvpnMdtJnSendSource InetAddress,
    ciscoMvpnMdtJnSendMdtGrpAddrType InetAddressType,
    ciscoMvpnMdtJnSendMdtGroup InetAddress,
    ciscoMvpnMdtJnSendMdtRefCt Gauge
    }

ciscoMvpnMdtJnSendGrpAddrType OBJECT-TYPE
    SYNTAX InetAddressType
--    Rsyntax INTEGER {
--        ?? enum value of zero may cause problems
--        unknown(0),
--        ipv4(1),
--        ipv6(2),
--        ipv4z(3),
--        ipv6z(4),
--        dns(16)
--        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The Internet address type of ciscoMvpnMdtJnSendGroup."
    ::= { ciscoMvpnMdtJnSendEntry 1 }

ciscoMvpnMdtJnSendGroup OBJECT-TYPE
    SYNTAX InetAddress(SIZE(4|16|20))
--    Rsyntax OCTET STRING(SIZE(4|16|20))
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This indicates the address of a multicast group in the 
         MVRF specified by the column mplsVpnVrfName. This along 
         with ciscoMvpnMdtJnSendSource identifies the multicast 
         routing entry for which the MDT join TLV is sent."
    ::= { ciscoMvpnMdtJnSendEntry 2 }

ciscoMvpnMdtJnSendSrcAddrType OBJECT-TYPE
    SYNTAX InetAddressType
--    Rsyntax INTEGER {
--        ?? enum value of zero may cause problems
--        unknown(0),
--        ipv4(1),
--        ipv6(2),
--        ipv4z(3),
--        ipv6z(4),
--        dns(16)
--        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The Internet address type of ciscoMvpnMdtJnSendSource."
    ::= { ciscoMvpnMdtJnSendEntry 3 }

ciscoMvpnMdtJnSendSource OBJECT-TYPE
    SYNTAX InetAddress(SIZE(4|16|20))
--    Rsyntax OCTET STRING(SIZE(4|16|20))
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This indicates the address of a source in the MVRF 
         specified by the column mplsVpnVrfName. This, along with 
         ciscoMvpnMdtJnSendGroup identifies the multicast routing entry
         for which the MDT join TLV is sent."
    ::= { ciscoMvpnMdtJnSendEntry 4 }

ciscoMvpnMdtJnSendMdtGrpAddrType OBJECT-TYPE
    SYNTAX InetAddressType
--    Rsyntax INTEGER {
--        ?? enum value of zero may cause problems
--        unknown(0),
--        ipv4(1),
--        ipv6(2),
--        ipv4z(3),
--        ipv6z(4),
--        dns(16)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The Internet address type of ciscoMvpnMdtJnSendMdtGroup."
    ::= { ciscoMvpnMdtJnSendEntry 5 }

ciscoMvpnMdtJnSendMdtGroup OBJECT-TYPE
    SYNTAX InetAddress
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The data MDT group in the MDT Join TLV sent."
    ::= { ciscoMvpnMdtJnSendEntry 6 }

ciscoMvpnMdtJnSendMdtRefCt OBJECT-TYPE
    SYNTAX Gauge(0..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates how many multicast routing entries in the MVRF 
         specified by the column mplsVpnVrfName are using 
         ciscoMvpnMdtJnSendMdtGroup for encapsulation."
    ::= { ciscoMvpnMdtJnSendEntry 7 }

ciscoMvpnTunnelTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CiscoMvpnTunnelEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table gives information about the MVPN/MDT tunnels 
         present in the device."
    ::= { ciscoMvpnProtocol 5 }

ciscoMvpnTunnelEntry OBJECT-TYPE
    SYNTAX CiscoMvpnTunnelEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry in this table is created for every MVPN tunnel 
         interface present in the device. The ifType for a MVPN
         tunnel is 'tunnel' (131). 
         (A MVPN tunnel interface should have relevant generic 
         support in the IF-MIB and in the internet draft,
         draft-thaler-inet-tunnel-mib. Only MVPN specific aspects
         of such a tunnel interface are to be specified in this
         table.)"
    INDEX { ifIndex }
    ::= { ciscoMvpnTunnelTable 1 }

CiscoMvpnTunnelEntry ::= SEQUENCE {
    ciscoMvpnTunnelName DisplayString,
    ciscoMvpnTunnelMvrf SnmpAdminString
    }

ciscoMvpnTunnelName OBJECT-TYPE
    SYNTAX DisplayString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The canonical name assigned to the tunnel. The ifName of 
         this tunnel interface should have a value equal to 
         ciscoMvpnTunnelName."
    ::= { ciscoMvpnTunnelEntry 1 }

ciscoMvpnTunnelMvrf OBJECT-TYPE
    SYNTAX SnmpAdminString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Name of the MVRF that this tunnel is associated with.
         This object has the same value as mplsVpnVrfName
         for the MVRF."
    ::= { ciscoMvpnTunnelEntry 2 }

ciscoMvpnMvrfChange TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE ciscoMvpnMIB
    VARIABLES {
        ciscoMvpnGenOperStatusChange }
--  Status
--    mandatory
    DESCRIPTION
        "A ciscoMvpnMvrfChange notification signifies a change about
         a MVRF in the device. The change event can be creation of 
         the MVRF, deletion of the MVRF or an update on the default 
         or data MDT configuration of the MVRF. The change event 
         is indicated by ciscoMvpnGenOperStatusChange embedded in 
         the notification. The user can then query 
         ciscoMvpnGenericTable, ciscoMvpnMdtDefaultTable and/or 
         ciscoMvpnMdtDataTable to get the details of the change as 
         necessary.
        
         Note: Since the creation of a MVRF is often followed by 
         configuration of default and data MDT groups for the MVRF, 
         more than one (three at most) notifications for a MVRF may 
         be generated serially, and it is really not necessary to 
         generate all three of them. An agent may choose to generate a 
         notification for the last event only, that is for data MDT 
         configuration.
        
         Similarly, deletion of default or data MDT configuration on a 
         MVRF happens before a MVRF is deleted, it is recommended 
         that the agent send the notification for MVRF deletion 
         event only."
    ::= 2

ciscoMvpnScalarGroup OBJECT IDENTIFIER ::= { ciscoMvpnGroups 1 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    Collection of scalar objects required for MVPN management.
--  objects
--    ciscoMvpnMvrfNumber, ciscoMvpnNotificationEnable

ciscoMvpnMIBGenericGroup OBJECT IDENTIFIER ::= { ciscoMvpnGroups 2 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    Collection of objects needed for MVPN MVRF management.
--  objects
--    ciscoMvpnGenOperStatusChange, ciscoMvpnGenOperChangeTime, 
--    ciscoMvpnGenAssociatedInterfaces, ciscoMvpnGenRowStatus

ciscoMvpnMIBMdtDefaultGroup OBJECT IDENTIFIER ::= { ciscoMvpnGroups 3 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    Collection of objects needed for MVPN default MDT group 
--     management.
--  objects
--    ciscoMvpnMdtDefaultAddrType, ciscoMvpnMdtDefaultAddress, 
--    ciscoMvpnMdtEncapsType, ciscoMvpnMdtDefaultRowStatus

ciscoMvpnMIBMdtDataGroup OBJECT IDENTIFIER ::= { ciscoMvpnGroups 4 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    Collection of objects needed for MVPN data MDT group
--     management.
--  objects
--    ciscoMvpnMdtDataRangeAddrType, ciscoMvpnMdtDataRangeAddress, 
--    ciscoMvpnMdtDataWildcardType, ciscoMvpnMdtDataWildcardBits, 
--    ciscoMvpnMdtDataThreshold, ciscoMvpnMdtDataRowStatus

ciscoMvpnMIBMrouteMdtGroup OBJECT IDENTIFIER ::= { ciscoMvpnGroups 5 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    Collection of objects that list sources in a MVRF
--     and the corresponding MDT groups.
--  objects
--    ciscoMvpnMrouteMdtGrpAddrType, ciscoMvpnMrouteMdtGroup, 
--    ciscoMvpnMrouteMdtType

ciscoMvpnMIBBgpMdtUpdateGroup OBJECT IDENTIFIER ::= { ciscoMvpnGroups 6 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    Collection of objects needed for MVPN BGP MDT updates 
--     related information.
--  objects
--    ciscoMvpnBgpMdtUpdateRd, ciscoMvpnBgpMdtUpdOrigAddrType, 
--    ciscoMvpnBgpMdtUpdateOriginator, ciscoMvpnBgpMdtUpdNhAddrType, 
--    ciscoMvpnBgpMdtUpdateNexthop

ciscoMvpnMIBMdtJnRcvGroup OBJECT IDENTIFIER ::= { ciscoMvpnGroups 7 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    Collection of objects needed for management of MVPN MDT 
--     data joins received by a device.
--  objects
--    ciscoMvpnMdtJnRcvUpTime, ciscoMvpnMdtJnRcvExpTime

ciscoMvpnMIBMdtJnSendGroup OBJECT IDENTIFIER ::= { ciscoMvpnGroups 8 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    Collection of objects needed for management of MVPN MDT 
--     data joins received by a device.
--  objects
--    ciscoMvpnMdtJnSendMdtGrpAddrType, ciscoMvpnMdtJnSendMdtGroup, 
--    ciscoMvpnMdtJnSendMdtRefCt

ciscoMvpnTunnelGroup OBJECT IDENTIFIER ::= { ciscoMvpnGroups 9 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    Objects required for MDT tunnel interface management.
--  objects
--    ciscoMvpnTunnelName, ciscoMvpnTunnelMvrf

ciscoMvpnNotificationGroup OBJECT IDENTIFIER ::= { ciscoMvpnGroups 10 }
-- NOTIFICATION-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of MVPN notifications.
--  notifications
--    ciscoMvpnMvrfChange

ciscoMvpnModuleFullCompliance OBJECT IDENTIFIER ::= { ciscoMvpnCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    Compliance statement for agents that support read-create
--     so that both configuration and monitoring can be
--     accomplished via this MIB module.
--  Module
--    >>current<<
--   MandGroup
--    ciscoMvpnScalarGroup
--   MandGroup
--    ciscoMvpnMIBGenericGroup
--   MandGroup
--    ciscoMvpnMIBMdtDefaultGroup
--   MandGroup
--    ciscoMvpnMIBMdtDataGroup
--   MandGroup
--    ciscoMvpnMIBMrouteMdtGroup
--   MandGroup
--    ciscoMvpnMIBBgpMdtUpdateGroup
--   MandGroup
--    ciscoMvpnMIBMdtJnRcvGroup
--   MandGroup
--    ciscoMvpnMIBMdtJnSendGroup
--   MandGroup
--    ciscoMvpnTunnelGroup
--   MandGroup
--    ciscoMvpnNotificationGroup
--   ObjVar
--    ciscoMvpnGenRowStatus
--   ObjVar
--    ciscoMvpnMdtDefaultAddrType
--   ObjVar
--    ciscoMvpnMdtEncapsType
--   ObjVar
--    ciscoMvpnMdtDefaultRowStatus
--   ObjVar
--    ciscoMvpnMdtDataRangeAddrType
--   ObjVar
--    ciscoMvpnMdtDataWildcardType
--   ObjVar
--    ciscoMvpnMdtDataRowStatus
--   ObjVar
--    ciscoMvpnMrouteMdtGrpAddrType
--   ObjVar
--    ciscoMvpnBgpMdtUpdOrigAddrType
--   ObjVar
--    ciscoMvpnBgpMdtUpdNhAddrType
--   ObjVar
--    ciscoMvpnMdtJnSendMdtGrpAddrType

ciscoMvpnModuleReadOnlyCompliance OBJECT IDENTIFIER ::= { ciscoMvpnCompliances 2 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    Compliance statement for agents that support the
--     monitoring of MVRFs via this MIB module.
--  Module
--    >>current<<
--   MandGroup
--    ciscoMvpnScalarGroup
--   MandGroup
--    ciscoMvpnMIBGenericGroup
--   MandGroup
--    ciscoMvpnMIBMdtDefaultGroup
--   MandGroup
--    ciscoMvpnMIBMdtDataGroup
--   MandGroup
--    ciscoMvpnMIBMrouteMdtGroup
--   MandGroup
--    ciscoMvpnMIBBgpMdtUpdateGroup
--   MandGroup
--    ciscoMvpnMIBMdtJnRcvGroup
--   MandGroup
--    ciscoMvpnMIBMdtJnSendGroup
--   MandGroup
--    ciscoMvpnTunnelGroup
--   MandGroup
--    ciscoMvpnNotificationGroup
--   ObjVar
--    ciscoMvpnGenRowStatus
--   ObjVar
--    ciscoMvpnMdtDefaultAddrType
--   ObjVar
--    ciscoMvpnMdtDefaultAddress
--   ObjVar
--    ciscoMvpnMdtEncapsType
--   ObjVar
--    ciscoMvpnMdtDefaultRowStatus
--   ObjVar
--    ciscoMvpnMdtDataRangeAddrType
--   ObjVar
--    ciscoMvpnMdtDataRangeAddress
--   ObjVar
--    ciscoMvpnMdtDataWildcardType
--   ObjVar
--    ciscoMvpnMdtDataWildcardBits
--   ObjVar
--    ciscoMvpnMdtDataThreshold
--   ObjVar
--    ciscoMvpnMdtDataRowStatus
--   ObjVar
--    ciscoMvpnMrouteMdtGrpAddrType
--   ObjVar
--    ciscoMvpnBgpMdtUpdOrigAddrType
--   ObjVar
--    ciscoMvpnBgpMdtUpdNhAddrType
--   ObjVar
--    ciscoMvpnMdtJnSendMdtGrpAddrType


END