-- MIB file created 03-Mar-2006 10:47:53, by
--   SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com

CISCO-NDE-MIB DEFINITIONS ::= BEGIN

-- From file: "CISCO-NDE-MIB.my"
-- Compile options "4 7 F H N O W 03 06 0B 0G 0N 0T"

IMPORTS
    ciscoMgmt
            FROM CISCO-SMI
    InetAddressType, InetAddress
            FROM INET-ADDRESS-MIB
    RowStatus
            FROM SNMPv2-TC-v1
    Gauge
            FROM RFC1155-SMI
    OBJECT-TYPE
            FROM RFC-1212;

ciscoNDEMIB OBJECT IDENTIFIER ::= { ciscoMgmt 226 }
-- MODULE-IDENTITY
--  LastUpdated
--    200603010000Z
--  OrgName
--    Cisco Systems, Inc.
--  ContactInfo
--    Cisco Systems 
--     Customer Service 
--     Postal: 170 W Tasman Drive 
--     San Jose, CA  95134 
--     USA 
--     Tel: +1 800 553-NETS 
--    
--     E-mail: cs-snmp@cisco.com
--  Descr
--    The Netflow Data Export (NDE) MIB provides instrumentation for 
--    configuration and operation of the Netflow Data Export feature. 
--    
--    A network flow is defined as an unidirectional sequence of  
--    packets between a given source and destination endpoints. 
--    Network flows are highly granular; flow endpoints are  
--    identified both by IP address  as well as by transport layer 
--    application port numbers. NetFlow also utilizes the IP 
--    Protocol type, Type of Service (ToS) and the input interface 
--    identifier to uniquely identify flows. 
--    
--    Netflow Data Export refers to the export of Netflow Data using  
--    UDP packets to Netflow Data Collector(s). A NetFlow Data  
--    Collector (NDC) captures, filters, aggregates, and stores the 
--    data from multiple NetFlow enabled devices. NDCs provide fast, 
--    scalable, and economical Netflow data.
--  RevDate
--    200603010000Z
--  RevDescr
--    Moved cndeCollectorStatus and cndeCollectorAddress from 
--     OBJECT clause to DESCRIPTION clause of MODULE COMPLIANCE.
--  RevDate
--    200512060000Z
--  RevDescr
--    Imported Unsigned32 from SNMPv2-SMI instead of CISCO-TC
--  RevDate
--    200108080000Z
--  RevDescr
--    Initial version of this MIB module.

ciscoNDEMIBObjects OBJECT IDENTIFIER ::= { ciscoNDEMIB 1 }
cndeCollectorConfiguration OBJECT IDENTIFIER ::= { ciscoNDEMIBObjects 1 }
cndeMIBNotifications OBJECT IDENTIFIER ::= { ciscoNDEMIB 2 }
cndeMIBNotifs   OBJECT IDENTIFIER ::= { ciscoNDEMIB 0 }
cndeMIBConformance OBJECT IDENTIFIER ::= { ciscoNDEMIB 3 }
cndeMIBCompliances OBJECT IDENTIFIER ::= { cndeMIBConformance 1 }
cndeMIBGroups   OBJECT IDENTIFIER ::= { cndeMIBConformance 2 }

cndeMaxCollectors OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Maximum number of entries allowed in the cndeCollectorTable. 
         A zero indicates unlimitted number of entries. 
         The agent should set this value during initialization, and 
         the vaule for this object cannot be changed during the  
         system's operation"
    ::= { cndeCollectorConfiguration 1 }

cndeCollectorTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CndeCollectorEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A control table to configure the NDE collectors.  
         The maximum number of entries is limited by cndeMaxCollectors. 
         The agent sends the NDE packets to each address configured 
         in this table."
    ::= { cndeCollectorConfiguration 2 }

cndeCollectorEntry OBJECT-TYPE
    SYNTAX CndeCollectorEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A conceptual row in the cndeCollectorEntry."
    INDEX { cndeCollectorAddressType, cndeCollectorAddress, cndeCollectorPort }
    ::= { cndeCollectorTable 1 }

CndeCollectorEntry ::= SEQUENCE {
    cndeCollectorAddressType InetAddressType,
    cndeCollectorAddress InetAddress,
    cndeCollectorPort INTEGER,
    cndeCollectorStatus RowStatus
    }

cndeCollectorAddressType OBJECT-TYPE
    SYNTAX InetAddressType
--    Rsyntax INTEGER {
--        ?? enum value of zero may cause problems
--        unknown(0),
--        ipv4(1),
--        ipv6(2),
--        ipv4z(3),
--        ipv6z(4),
--        dns(16)
--        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The type of Internet address used by this entry"
    ::= { cndeCollectorEntry 1 }

cndeCollectorAddress OBJECT-TYPE
    SYNTAX InetAddress(SIZE(1..64))
--    Rsyntax OCTET STRING(SIZE(1..64))
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The Internet address of the collector. This is the  
        address which the Netflow data is exported to."
    ::= { cndeCollectorEntry 2 }

cndeCollectorPort OBJECT-TYPE
    SYNTAX INTEGER(1..65535)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The transport port of the collector which the  
         Netflow data is exported to."
    ::= { cndeCollectorEntry 3 }

cndeCollectorStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The status object used to manage the rows in this table."
    ::= { cndeCollectorEntry 4 }

cndeCollectorConfigurationGroup OBJECT IDENTIFIER ::= { cndeMIBGroups 1 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects for configuring the Netflow Data 
--     Export Collectors and ports.
--  objects
--    cndeMaxCollectors, cndeCollectorStatus

cndeMIBCompliance OBJECT IDENTIFIER ::= { cndeMIBCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    The compliance statement for the CISCO-NDE-MIB. 
--    
--    Objects used in an INDEX clause normally have a MAX-ACCESS 
--    of 'not-accessible', and the SMIv2 does not allow 
--    'not-accessible' objects to be included in a GROUP clause. 
--    Consequently, a minimum syntax cannot be specified for them 
--    in an OBJECT clause.  So, the following minimum compliance 
--    is specified within this DESCRIPTION clause: 
--      
--    
--    ==OBJECT cndeCollectorAddressType 
--    ==SYNTAX InetAddressType { ipv4(1) } 
--    ==DESCRIPTION 
--    ==    An implementation is only required to support IPv4 
--    ==    addresses. 
--     
--    ==OBJECT cndeCollectorAddress 
--    ==SYNTAX InetAddress { SIZE(4) } 
--    ==DESCRIPTION 
--    ==    An implementation is only required to support IPv4 
--    ==    addresses. 
--  Module
--    >>current<<
--   MandGroup
--    cndeCollectorConfigurationGroup
--   ObjVar
--    cndeCollectorStatus


END