-- MIB file created 23-Jan-2006 10:01:50, by -- SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com CISCO-POP-MGMT-MIB DEFINITIONS ::= BEGIN -- From file: "CISCO-POP-MGMT-MIB.my" -- Compile options "4 7 F H N O W 03 06 0B 0G 0N 0T" IMPORTS DisplayString, TimeStamp, TruthValue FROM SNMPv2-TC-v1 InterfaceIndexOrZero FROM IF-MIB dsx1LineStatus, dsx1LineIndex FROM DS1-MIB ciscoExperiment FROM CISCO-SMI Counter, Gauge, IpAddress, TimeTicks FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215; ciscoPopMgmtMIB OBJECT IDENTIFIER ::= { ciscoExperiment 19 } -- MODULE-IDENTITY -- LastUpdated -- 200512210000Z -- OrgName -- Cisco Systems, Inc. -- ContactInfo -- Cisco Systems -- Customer Service -- -- Postal: 170 W Tasman Drive -- San Jose, CA 95134 -- USA -- -- Tel: +1 800 553-NETS -- -- E-mail: cs-apm@cisco.com -- Descr -- Cisco Point Of Presence Management MIB to provide DSX1 -- and DSX0 facilities management and call summaries. -- RevDate -- 200512210000Z -- RevDescr -- Imported dsx1LineIndex from DS1-MIB instead of -- RFC1406-MIB -- -- Changed SYNTAX of -- cpmDS1SlotIndex -- cpmDS1PortIndex -- cpmChannelIndex -- cpmDS1UsageSlotIndex -- cpmDS1UsagePortIndex -- cpmActiveCallSummaryIndex -- cpmCallHistorySummaryIndex -- -- cpmActiveModemSlot -- cpmActiveModemPort -- cpmActiveEntrySlot -- cpmActiveEntryPort -- cpmActiveEntryChannel -- -- from Integer32 to Integer32 (0..2147483647) -- -- Imported Unsigned32 from SNMPv2-SMI instead of -- CISCO-TC. -- RevDate -- 200212260000Z -- RevDescr -- Added voice(6) to object cpmCallType. -- Added Notification Group cpmNotificationGroupRev1 -- RevDate -- 200011290000Z -- RevDescr -- Added cpmCallVolume with objects: -- cpmCallVolSuccISDNDigital -- cpmCallVolAnalogCallClearedNormally -- RevDate -- 200003030000Z -- RevDescr -- Extended cpmDs1DS0UsageTable with objects: -- cpmDS1TotalAnalogCalls -- cpmDS1TotalDigitalCalls -- cpmDS1TotalV110Calls -- cpmDS1TotalV120Calls -- cpmDS1TotalCalls -- cpmDS1TotalTimeInUse -- cpmDS1CurrentIdle -- cpmDS1CurrentOutOfService -- cpmDS1CurrentBusyout -- cpmDS1InOctets -- cpmDS1OutOctets -- cpmDS1InPackets -- cpmDS1OutPackets -- -- Added system level summary objects: -- cpmISDNCfgActiveDChannels -- cpmISDNCfgBChannelsTimeInUse -- cpmISDNCfgBChannelsTimeInUseAnalog -- cpmISDNCfgBChannelCalls -- cpmISDNCfgBChannelAnalogCalls -- cpmTotalISDNSyncPPPCalls -- -- Added DS0StatusTable with objects: -- cpmDS0OperStatus -- cpmDS0BusyoutAdminStatus -- cpmDS0BusyoutAllow -- cpmDS0BusyoutStatus -- cpmDS0BusyoutSource -- cpmDS0BusyoutTime -- cpmDS0ConfigFunction -- cpmDS0InterfaceIndex -- -- Added busyout notification and -- notification enable object: -- cpmDS0BusyoutNotification -- cpmDS0BusyoutNotifyEnable -- cpmDS1LoopbackNotifyConfig -- cpmDS1LoopbackNotifyEnable -- cpmDS1LoopbackNotification -- RevDate -- 9802020000Z -- RevDescr -- Added objects: -- cpmISDNCfgBChanInUseForVoice -- cpmCASCfgBChanInUseForVoice -- Added enumeration-type: -- voice -- RevDate -- 9710210000Z -- RevDescr -- Added objects: -- cpmDS1DS0UsageTable -- cpmActiveDS0sHighWaterMark -- cpmSW56CfgBChannelsInUse -- RevDate -- 9705010000Z -- RevDescr -- Initial version of this MIB module. ciscoPopMgmtMIBObjects OBJECT IDENTIFIER ::= { ciscoPopMgmtMIB 1 } cpmDS0Usage OBJECT IDENTIFIER ::= { ciscoPopMgmtMIBObjects 1 } cpmCallFailure OBJECT IDENTIFIER ::= { ciscoPopMgmtMIBObjects 2 } cpmActiveCallSummary OBJECT IDENTIFIER ::= { ciscoPopMgmtMIBObjects 3 } cpmCallHistorySummary OBJECT IDENTIFIER ::= { ciscoPopMgmtMIBObjects 4 } cpmDS0Status OBJECT IDENTIFIER ::= { ciscoPopMgmtMIBObjects 5 } cpmDS1LoopbackNotifyConfig OBJECT IDENTIFIER ::= { ciscoPopMgmtMIBObjects 6 } cpmCallVolume OBJECT IDENTIFIER ::= { ciscoPopMgmtMIBObjects 7 } cPopMgmtMIBNotificationPrefix OBJECT IDENTIFIER ::= { ciscoPopMgmtMIB 2 } cpmNotifications OBJECT IDENTIFIER ::= { cPopMgmtMIBNotificationPrefix 0 } cpmMIBConformance OBJECT IDENTIFIER ::= { ciscoPopMgmtMIB 3 } cpmMIBCompliances OBJECT IDENTIFIER ::= { cpmMIBConformance 1 } cpmMIBGroups OBJECT IDENTIFIER ::= { cpmMIBConformance 2 } cpmDS0UsageTable OBJECT-TYPE SYNTAX SEQUENCE OF CpmDS0UsageEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The DS0 usage table is for hardware and software objects not used as interfaces, and not covered in rfc1213. These objects include analog calls coming over ISDN, Channelized T1, and Channelized E1. This table is created for every DS1 line in the device." ::= { cpmDS0Usage 1 } cpmDS0UsageEntry OBJECT-TYPE SYNTAX CpmDS0UsageEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the DS0 Usage table." INDEX { cpmDS1SlotIndex, cpmDS1PortIndex, cpmChannelIndex } ::= { cpmDS0UsageTable 1 } CpmDS0UsageEntry ::= SEQUENCE { cpmDS1SlotIndex INTEGER, cpmDS1PortIndex INTEGER, cpmChannelIndex INTEGER, cpmConfiguredType INTEGER, cpmDS0CallType INTEGER, cpmL2Encapsulation INTEGER, cpmCallCount Counter, cpmTimeInUse TimeTicks, cpmInOctets Counter, cpmOutOctets Counter, cpmInPackets Counter, cpmOutPackets Counter, cpmAssociatedInterface InterfaceIndexOrZero } cpmDS1SlotIndex OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "The slot index indicates the slot number on the device where the DS1 card resides." ::= { cpmDS0UsageEntry 1 } cpmDS1PortIndex OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "The port index indicates the port number of a specific DS1 on the DS1 card in the slot" ::= { cpmDS0UsageEntry 2 } cpmChannelIndex OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "The channel index that distinguishes the DS0 timeslot of the DS1 port. The range of the channel index is based on the number of T1/E1 channels: 1-24(T1) and 1-31(E1)." ::= { cpmDS0UsageEntry 3 } cpmConfiguredType OBJECT-TYPE SYNTAX INTEGER { unknown(1), isdn(2), ct1(3), ce1(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The configured technology for the channel: ISDN(2), Channelized T1 (3) or Channelized E1 (4)." ::= { cpmDS0UsageEntry 4 } cpmDS0CallType OBJECT-TYPE SYNTAX INTEGER { idle(1), unknown(2), analog(3), digital(4), v110(5), v120(6), voice(7) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of the current call carried by this DS0. idle - This DS0 is currently idle. unknown - The data type of the call currently occupying this DS0 is not one of the types listed here. analog - The data type of the call currently occupying this DS0 is analog, i.e. a modem call. digital - The data type of the call currently occupying this DS0 is digital. v110 - The call currently occupying this DS0 is a V110 call. v120 - The call currently occupying this DS0 is a V120 call. voice - The call currently occupying this DS0 is a voice call." ::= { cpmDS0UsageEntry 5 } cpmL2Encapsulation OBJECT-TYPE SYNTAX INTEGER { idle(1), unknown(2), ppp(3), slip(4), arap(5), hdlc(6), exec(7), voice(8) } ACCESS read-only STATUS mandatory DESCRIPTION "The data link encapsulation of the call currently occuppying this DS0: idle - This DS0 is currently idle. unknown - The encapsulation of the currently active call on this DS0 is not one of the options following. PPP - slip - arap - hdlc - exec - voice - voice encapsulation; IANA type voiceEncap(103)" ::= { cpmDS0UsageEntry 6 } cpmCallCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of calls that have occupied this DS0." ::= { cpmDS0UsageEntry 7 } cpmTimeInUse OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The amount of time that this DS0 has been in use. This is computed by summing up the call durations of all past calls that have occupied this DS0." ::= { cpmDS0UsageEntry 8 } cpmInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of octets received on this DS0 for data calls (cpmDS0CallType has the value 'analog(3)' or 'digital(4)' or 'v110(5)' or 'v120(6)'). All the received 'raw' octets are counted, including any protocol headers which may or may not be present, depending on the service type of data call." ::= { cpmDS0UsageEntry 9 } cpmOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of octets transmitted on this DS0 for data calls (cpmDS0CallType has the value 'analog(3)' or 'digital(4)' or 'v110(5)' or 'v120(6)'). All the transmitted 'raw' octets are counted, including any protocol headers which may or may not be present, depending on the service type of data call." ::= { cpmDS0UsageEntry 10 } cpmInPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets received on this DS0 for data calls (cpmDS0CallTyp has the value 'analog(3)' or 'digital(4)' or 'v110(5)' or 'v120(6)')." ::= { cpmDS0UsageEntry 11 } cpmOutPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets transmitted on this DS0 for data calls (cpmDS0CallTyp has the value 'analog(3)' or 'digital(4)' or 'v110(5)' or 'v120(6)')." ::= { cpmDS0UsageEntry 12 } cpmAssociatedInterface OBJECT-TYPE SYNTAX InterfaceIndexOrZero -- Rsyntax INTEGER(0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is the value of ifIndex when the specific channel has an active call with a corresponding interface in the ifTable. For example, a digital ISDN call has a value pointing to the B-Channel entry in the ifTable. A modem call over ISDN or CT1/CE1 has a value pointing to the async interface of the modem assigned to this call. If the channel is idle, this value is 0." ::= { cpmDS0UsageEntry 13 } cpmISDNCfgBChanInUseForAnalog OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of configured ISDN B-Channels that are currently occupied by analog calls." ::= { cpmDS0Usage 2 } cpmISDNCfgBChannelsInUse OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of configured ISDN B-Channels that are currently occupied by both Digital and Analog calls." ::= { cpmDS0Usage 3 } cpmActiveDS0s OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of DS0s that are currently in use." ::= { cpmDS0Usage 4 } cpmPPPCalls OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The current number of active PPP calls received by the managed device" ::= { cpmDS0Usage 5 } cpmV120Calls OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The current number of active V.120 calls received by the managed device" ::= { cpmDS0Usage 6 } cpmV110Calls OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The current number of active V.110 calls received by the managed device" ::= { cpmDS0Usage 7 } cpmActiveDS0sHighWaterMark OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The high water mark for number of DS0s that are active simultaneously" ::= { cpmDS0Usage 8 } cpmDS1DS0UsageTable OBJECT-TYPE SYNTAX SEQUENCE OF CpmDS1DS0UsageEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The DS1-DS0-usage table is for hardware and software objects not used as interfaces, and not covered in rfc1213. These objects provide information on timeslots usage for a particular DS1." ::= { cpmDS0Usage 9 } cpmDS1DS0UsageEntry OBJECT-TYPE SYNTAX CpmDS1DS0UsageEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the DS0 Usage table." INDEX { cpmDS1UsageSlotIndex, cpmDS1UsagePortIndex } ::= { cpmDS1DS0UsageTable 1 } CpmDS1DS0UsageEntry ::= SEQUENCE { cpmDS1UsageSlotIndex INTEGER, cpmDS1UsagePortIndex INTEGER, cpmDS1ActiveDS0s Gauge, cpmDS1ActiveDS0sHighWaterMark Counter, cpmDS1TotalAnalogCalls Counter, cpmDS1TotalDigitalCalls Counter, cpmDS1TotalV110Calls Counter, cpmDS1TotalV120Calls Counter, cpmDS1TotalCalls Counter, cpmDS1TotalTimeInUse Gauge, cpmDS1CurrentIdle Gauge, cpmDS1CurrentOutOfService Gauge, cpmDS1CurrentBusyout Gauge, cpmDS1InOctets Counter, cpmDS1OutOctets Counter, cpmDS1InPackets Counter, cpmDS1OutPackets Counter } cpmDS1UsageSlotIndex OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "The slot index indicates the slot number on the device where the DS1 card resides. The slot index of the first slot is starting from 0 and increment by 1 for the next slot in the device." ::= { cpmDS1DS0UsageEntry 1 } cpmDS1UsagePortIndex OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "The port index indicates the port number of a specific DS1 on the DS1 card in the slot. The port index of the first port is starting from 0 and increment by 1 for the next port on the DS1 card." ::= { cpmDS1DS0UsageEntry 2 } cpmDS1ActiveDS0s OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of DS0s that are currently in use for a particular DS1." ::= { cpmDS1DS0UsageEntry 3 } cpmDS1ActiveDS0sHighWaterMark OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The highest number of simultaneously actived DS0s on a specified DS1." ::= { cpmDS1DS0UsageEntry 4 } cpmDS1TotalAnalogCalls OBJECT-TYPE SYNTAX Counter -- Units -- calls ACCESS read-only STATUS mandatory DESCRIPTION "The accumulated number of analog data calls (cpmDS0CallType has the value 'analog(3)') on all ds0s within this DS1 since system startup. The object includes active and terminated calls." ::= { cpmDS1DS0UsageEntry 5 } cpmDS1TotalDigitalCalls OBJECT-TYPE SYNTAX Counter -- Units -- calls ACCESS read-only STATUS mandatory DESCRIPTION "The accumulated number of digital data calls (cpmDS0CallType has the value 'digital(4)') on all ds0s within this DS1 since system startup. The object includes active and terminated calls." ::= { cpmDS1DS0UsageEntry 6 } cpmDS1TotalV110Calls OBJECT-TYPE SYNTAX Counter -- Units -- calls ACCESS read-only STATUS mandatory DESCRIPTION "The accumulated number of v.110 data calls (cpmDS0CallType has the value 'v110(5)') on all ds0s within this DS1 since system startup. The object includes active and terminated calls." ::= { cpmDS1DS0UsageEntry 7 } cpmDS1TotalV120Calls OBJECT-TYPE SYNTAX Counter -- Units -- calls ACCESS read-only STATUS mandatory DESCRIPTION "The accumulated number of v.120 data calls (cpmDS0CallType has the value 'v120(6)') on all ds0s within this DS1 since system startup. The object includes active and terminated calls." ::= { cpmDS1DS0UsageEntry 8 } cpmDS1TotalCalls OBJECT-TYPE SYNTAX Counter -- Units -- calls ACCESS read-only STATUS mandatory DESCRIPTION "The total number of calls on all the DS0s within this DS1 since last system re-initialization. The object includes active and terminated calls. This only includes DS0s configured as bearer channels, not those configured for signaling, such as PRI D-channel." ::= { cpmDS1DS0UsageEntry 9 } cpmDS1TotalTimeInUse OBJECT-TYPE SYNTAX Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "The total call duration on all the DS0s within this DS1 since last system re-initialization. This only includes DS0s configured as bearer channels, not those configured for signaling, such as PRI D-channel." ::= { cpmDS1DS0UsageEntry 10 } cpmDS1CurrentIdle OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The total number of DS0s currently in idle state within this DS1. This only includes DS0s configured as bearer and CAS channels, not those configured for signaling, such as PRI D-channel. See cpmDS0OperStatus in the cpmDS0StatusTable for individual DS0s." ::= { cpmDS1DS0UsageEntry 11 } cpmDS1CurrentOutOfService OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The total number of DS0s in this DS1 currently placed out of service. This only includes DS0s configured as bearer and CAS channels, not those configured for signaling, such as PRI D-channel. See cpmDS0OperStatus in the cpmDS0StatusTable for individual DS0s." ::= { cpmDS1DS0UsageEntry 12 } cpmDS1CurrentBusyout OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The total number of DS0s in this DS1 which currently have been requested to be busied out, but are not yet out of service. When an active call on a busied out DS0 terminates, the DS0 will be out of service, this object will be decremented and cpmDS1TotalOutOfService will be incremented. This only includes DS0s configured as bearer channels, not those configured for signaling, such as PRI D-channel. See cpmDS0AdminStatus in the cpmDS0StatusTable for individual DS0s." ::= { cpmDS1DS0UsageEntry 13 } cpmDS1InOctets OBJECT-TYPE SYNTAX Counter -- Units -- octets ACCESS read-only STATUS mandatory DESCRIPTION "The total number of octets received over all the DS0 bearer channels within this DS1 since last system re-initialization. This value is a sum of all the cpmInOctets objects in the cpmDS0UsageTable for this DS1." ::= { cpmDS1DS0UsageEntry 14 } cpmDS1OutOctets OBJECT-TYPE SYNTAX Counter -- Units -- octets ACCESS read-only STATUS mandatory DESCRIPTION "The total number of octets transmitted over all the DS0 bearer channels within this DS1 since last system re-initialization. This value is a sum of all the cpmOutOctets objects in the cpmDS0UsageTable for this DS1." ::= { cpmDS1DS0UsageEntry 15 } cpmDS1InPackets OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "The total number of data packets received over all the DS0 bearer channels within this DS1 since last system re-initialization. This value is a sum of all the cpmInPackets objects in the cpmDS0UsageTable for this DS1. It consists of PPP or PCM voice data packets." ::= { cpmDS1DS0UsageEntry 16 } cpmDS1OutPackets OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "The total number of data packets transmitted over all the DS0 bearer channels within this DS1 since last system re-initialization. This value is a sum of all the cpmOutPackets objects in the cpmDS0UsageTable for this DS1. It consists of PPP or PCM voice data packets." ::= { cpmDS1DS0UsageEntry 17 } cpmSW56CfgBChannelsInUse OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of configured SW56 B-Channels that are currently occupied by Digital calls." ::= { cpmDS0Usage 10 } cpmISDNCfgBChanInUseForVoice OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of configured ISDN B-Channels that are currently occupied by Voice calls." ::= { cpmDS0Usage 11 } cpmCASCfgBChanInUseForVoice OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of configured CAS Channels that are currently occupied by Voice calls." ::= { cpmDS0Usage 12 } cpmISDNCfgActiveDChannels OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of ISDN signaling channels which are active." ::= { cpmDS0Usage 13 } cpmISDNCfgBChannelsTimeInUse OBJECT-TYPE SYNTAX Counter -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "The total call duration on all the ISDN B-channels since last system re-initialization." ::= { cpmDS0Usage 14 } cpmISDNCfgBChannelsTimeInUseAnlg OBJECT-TYPE SYNTAX Counter -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "The total analog call duration on all the ISDN B-channels since last system re-initialization. Analog call type is identified in cpmDS0CallType." ::= { cpmDS0Usage 15 } cpmISDNCfgBChannelCalls OBJECT-TYPE SYNTAX Counter -- Units -- calls ACCESS read-only STATUS mandatory DESCRIPTION "The total number of calls on all the ISDN B-channels since last system re-initialization." ::= { cpmDS0Usage 16 } cpmISDNCfgBChannelAnalogCalls OBJECT-TYPE SYNTAX Counter -- Units -- calls ACCESS read-only STATUS mandatory DESCRIPTION "The total number of analog calls on all the ISDN B-channels since last system re-initialization. Analog call type is identified in cpmDS0CallType." ::= { cpmDS0Usage 17 } cpmTotalISDNSyncPPPCalls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of ISDN-sync PPP calls received by the managed device since last system re-initialization." ::= { cpmDS0Usage 18 } cpmDS0BusyoutNotifyEnable OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This variable controls generation of cpmDS0BusyoutNotification. When this variable is 'true(1)', generation of cpmDS0BusyoutNotification is enabled. When this variable is 'false(2)', generation of cpmDS0BusyoutNotification is disabled. The default value is 'false(2)'. " ::= { cpmDS0Status 1 } cpmDS0StatusTable OBJECT-TYPE SYNTAX SEQUENCE OF CpmDS0StatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The DS0 Status Table provides additional DS0 level information and configuration. This table is an extension of the cpmDS0UsageTable. " ::= { cpmDS0Status 2 } cpmDS0StatusEntry OBJECT-TYPE SYNTAX CpmDS0StatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Status for an individual DS0. This entry AUGMENTS the cpmDS0UsageEntry. An entry exists for each configured DS0 in the system. " INDEX { cpmDS1SlotIndex, cpmDS1PortIndex, cpmChannelIndex } -- Augments cpmDS0UsageEntry ::= { cpmDS0StatusTable 1 } CpmDS0StatusEntry ::= SEQUENCE { cpmDS0OperStatus INTEGER, cpmDS0BusyoutAdminStatus INTEGER, cpmDS0BusyoutAllow TruthValue, cpmDS0BusyoutStatus INTEGER, cpmDS0BusyoutSource INTEGER, cpmDS0BusyoutTime TimeStamp, cpmDS0ConfigFunction INTEGER, cpmDS0InterfaceIndex InterfaceIndexOrZero } cpmDS0OperStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), down(2), idle(3), setup(4), connected(5), test(6) } ACCESS read-only STATUS mandatory DESCRIPTION "The operational state of the DSO. This object provides more detailed information than the IF-MIB ifOperStatus. unknown - The DSO is in an unknown state down - The DS0 is out of service idle - This DS0 is currently idle setup - A new connection is in the process of being established connected - A active connection exists test - The DSO is undergoing internal testing " ::= { cpmDS0StatusEntry 1 } cpmDS0BusyoutAdminStatus OBJECT-TYPE SYNTAX INTEGER { noBusyout(1), busyout(2), busyoutImmediate(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The administratively requested busyout state of the DSO. This object represents the desired busyout state of the DS0, which may or may not be reflected in the operation state, cpmDS0OperStatus. This object may be set via SNMP or the system console. noBusyout - No administrative busyout has been requested busyout - The DS0 will be shutdown when it next transitions to idle(2) cpmDS0OperStatus busyoutImmediate - Immediately transition the DS0 to down(2), terminating any current activity The effect of setting this object to busyout or busyoutImmediate is constrained by the value of cpmDS0BusyoutAllowed. If cpmDS0BusyoutAllowed has a value of false, attempting to set this object to busyout or busyoutImmediate will fail. This object provides more busyout information not available from the IF-MIB ifAdminStatus. This object reflects busyout requests configured on the local system as defined for the object cpmDS0BusyoutSource. " ::= { cpmDS0StatusEntry 2 } cpmDS0BusyoutAllow OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The object indicates if busyout requests for this DSO will be allowed. true - Setting cpmDS0BusyoutAdminStatus to busyout(2) or busyoutImmediate(3) will be accepted false - Busyout requests for this DS0 are not allowed The default value is true(1). If cpmDS0BusyoutAllowed has a value of false(2), attempting to set cpmDS0BusyoutAdminStatus to busyout or busyoutImmediate will fail. This object only constrains setting the value of cpmDS0BusyoutAdminStatus when cpmDS0BusyoutAdminStatus is set via SNMP. " ::= { cpmDS0StatusEntry 3 } cpmDS0BusyoutStatus OBJECT-TYPE SYNTAX INTEGER { noBusyout(1), busyoutPending(2), busiedOut(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The busyout status of the DSO. noBusyout - The DS0 is not busied out nor has a busyout pending. busyoutPending - The DS0 has a busyout request pending. It will shutdown when it next transitions to idle(2) cpmDS0OperStatus. busiedOut - The DS0 is out of service due to a busyout request. This object is needed to reflect busyouts initiated other than administrativly, as described in cpmDS0BusyoutSource. " ::= { cpmDS0StatusEntry 4 } cpmDS0BusyoutSource OBJECT-TYPE SYNTAX INTEGER { none(1), local(2), internal(3), remote(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The source of the busyout request either pending or active for the DSO. none - The DS0 is not busied out nor has a busyout request pending local - The DS0 is busied out or has a pending request due to an adminstrative command issued locally. internal - The DS0 is busied out or has a pending request due to internal system processing. remote - The DS0 is busied out or has a pending request due to a request from the peer switch. " ::= { cpmDS0StatusEntry 5 } cpmDS0BusyoutTime OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Value of sysUpTime when the most recent busyout request was issued for this DS0. The value is zero indicates no busyout request has been issued. " ::= { cpmDS0StatusEntry 6 } cpmDS0ConfigFunction OBJECT-TYPE SYNTAX INTEGER { unknown(1), t1CcsSignallingChan(2), t1CcsBearerChan(3), e1CcsSignallingChan(4), e1CcsBearerChan(5), t1CasChan(6), e1CasChan(7) } ACCESS read-only STATUS mandatory DESCRIPTION "The object indicates the function this DSO is configured to provide. This object provides more detail than cpmConfiguredType. unknown - Unknown configuration t1SignallingChan - DS0 is configured as a T1 common channel signalling (CCS) such as ISDN PRI D-channel t1CcsBearerChan - DS0 is configured as a T1 common channel signalling (CCS) bearer channel e1SignallingChan - DS0 is configured as a E1 common channel signalling (CCS) such as ISDN PRI D-channel e1CcsBearerChan - DS0 is configured as a E1 common channel signalling (CCS) bearer channel t1CasChan - DS0 is configured as a T1 channel associated signalling channel e1CasChan - DS0 is configured as a E1 channel associated signalling channel " ::= { cpmDS0StatusEntry 7 } cpmDS0InterfaceIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero -- Rsyntax INTEGER(0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is the value of ifIndex in the ifTable for this DS0." ::= { cpmDS0StatusEntry 8 } cpmISDNCallsRejected OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of rejected ISDN calls in this managed device." ::= { cpmCallFailure 1 } cpmModemCallsRejected OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of rejected modem calls in this managed device." ::= { cpmCallFailure 2 } cpmISDNCallsClearedAbnormally OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of connected ISDN calls that have been abnormally cleared, that is, they were cleared by some event other than the following: a - The transmission of a normal disconnect message by the local end. b - The reception of a normal disconnect message from the remote end." ::= { cpmCallFailure 3 } cpmModemCallsClearedAbnormally OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of connected modem calls that have been abnormally cleared, that is, they were not cleared with the proper modem protocol handshakes." ::= { cpmCallFailure 4 } cpmISDNNoResource OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ISDN calls that have been rejected because there is no B-Channel available to handle the call." ::= { cpmCallFailure 5 } cpmModemNoResource OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of modem calls that have been rejected because there is no modem available to handle the call." ::= { cpmCallFailure 6 } cpmCallVolSuccISDNDigital OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of incoming and outgoing successful ISDN digital data calls (cpmDS0CallType has the value 'digital(4)'), since system startup. A successful call is a terminated call that has a disconnect cause of 'normal call clearing(16)'." ::= { cpmCallVolume 1 } cpmCallVolAnalogCallClearedNormally OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of incoming and outgoing successful analog data calls which use modem resource (cpmDS0CallType has the value 'analog(3)'), since system startup. A successful call is a terminated call who is cleared by the proper modem protocol handshake." ::= { cpmCallVolume 2 } cpmActiveCallSummaryTable OBJECT-TYPE SYNTAX SEQUENCE OF CpmActiveCallSummaryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The active call summary table is needed to track currently active calls. This table is needed because modem calls are not in CALL-HISTORY-MIB, and the DIAL-CONTROL_MIB is not yet available." ::= { cpmActiveCallSummary 1 } cpmActiveCallSummaryEntry OBJECT-TYPE SYNTAX CpmActiveCallSummaryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Call Summary table." INDEX { cpmActiveCallStartTimeIndex, cpmActiveCallSummaryIndex } ::= { cpmActiveCallSummaryTable 1 } CpmActiveCallSummaryEntry ::= SEQUENCE { cpmActiveCallStartTimeIndex TimeStamp, cpmActiveCallSummaryIndex INTEGER, cpmActiveUserID DisplayString, cpmActiveUserIpAddr IpAddress, cpmActiveCallType INTEGER, cpmActiveModemSlot INTEGER, cpmActiveModemPort INTEGER, cpmActiveCallDuration TimeTicks, cpmActiveEntrySlot INTEGER, cpmActiveEntryPort INTEGER, cpmActiveEntryChannel INTEGER, cpmActiveRemotePhoneNumber DisplayString, cpmActiveLocalPhoneNumber DisplayString, cpmActiveTTYNumber INTEGER } cpmActiveCallStartTimeIndex OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS not-accessible STATUS mandatory DESCRIPTION "The start time of the current call." ::= { cpmActiveCallSummaryEntry 1 } cpmActiveCallSummaryIndex OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "Arbitrary small integer to distinguish calls that occured at the same time tick." ::= { cpmActiveCallSummaryEntry 2 } cpmActiveUserID OBJECT-TYPE SYNTAX DisplayString(SIZE(0..255)) -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The User login ID or zero length string if unavailable." ::= { cpmActiveCallSummaryEntry 3 } cpmActiveUserIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP address of the call or 0.0.0.0 if unavailable. This object comes directly from IOS." ::= { cpmActiveCallSummaryEntry 4 } cpmActiveCallType OBJECT-TYPE SYNTAX INTEGER { unknown(1), analog(2), digital(3), v110(4), v120(5), voice(6) } ACCESS read-only STATUS mandatory DESCRIPTION "The call type: unknown - None of the following analog - Modem call digital - Digital call v110 - V110 Call v120 - V120 Call voice - Voice Call" ::= { cpmActiveCallSummaryEntry 5 } cpmActiveModemSlot OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "Identification of modem resource allocated to call. This is the value of cmSlotIndex from CISCO-MODEM-MGMT-MIB. This value along with cpmActiveModemPort uniquely identifies a modem. Value is -1 if call does not utilize a modem." ::= { cpmActiveCallSummaryEntry 6 } cpmActiveModemPort OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "Identification of modem resource allocated to call. This is the value of cmPortIndex from CISCO-MODEM-MGMT-MIB. This value along with cpmActiveModemSlot uniquely identifies a modem. Value is -1 if call does not utilize a modem." ::= { cpmActiveCallSummaryEntry 7 } cpmActiveCallDuration OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The duration of the current call." ::= { cpmActiveCallSummaryEntry 8 } cpmActiveEntrySlot OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The logical slot in which the DS1 line that the user connected on resides." ::= { cpmActiveCallSummaryEntry 9 } cpmActiveEntryPort OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The logical port for the DS1 line that the user connected on." ::= { cpmActiveCallSummaryEntry 10 } cpmActiveEntryChannel OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The channel within the DS1 that is allocated to the call." ::= { cpmActiveCallSummaryEntry 11 } cpmActiveRemotePhoneNumber OBJECT-TYPE SYNTAX DisplayString(SIZE(0..255)) -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The remote telephone number. For a call into the device, this is the originating number. For a call out of the device, this is the dialed number. If not available the string length is zero." ::= { cpmActiveCallSummaryEntry 12 } cpmActiveLocalPhoneNumber OBJECT-TYPE SYNTAX DisplayString(SIZE(0..255)) -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The local telephone number. For a call into the device, this is the dialed number. For a call out of the device, this is the originating number. If not available the string length is zero." ::= { cpmActiveCallSummaryEntry 13 } cpmActiveTTYNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The TTY number associated with this call. This information comes from the IOS 'show line' command." ::= { cpmActiveCallSummaryEntry 14 } cpmCallHistorySummaryTableMaxLength OBJECT-TYPE SYNTAX INTEGER(0..500) ACCESS read-write STATUS mandatory DESCRIPTION "The upper limit on the number of entries that the cpmCallHistoryTable may contain. A value of 0 will prevent any history from being retained. When this table is full, the oldest entry will be deleted and the new one will be created." DEFVAL { 100 } ::= { cpmCallHistorySummary 1 } cpmCallHistorySummaryRetainTimer OBJECT-TYPE SYNTAX INTEGER(0..500) -- Units -- minutes ACCESS read-write STATUS mandatory DESCRIPTION "The minimum amount of time that an cpmCallHistoryEntry will be maintained before being deleted. A value of 0 will prevent any history from being retained, but will not prevent callCompletion traps being genarated." DEFVAL { 15 } ::= { cpmCallHistorySummary 2 } cpmCallHistorySummaryTable OBJECT-TYPE SYNTAX SEQUENCE OF CpmCallHistorySummaryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The call history summary table is needed to track ended active calls. This table is needed because modem calls are not in CALL-HISTORY-MIB; the CISCO-ISDN-MIB objects do not contain information about the active calls; and the DIAL-CONTROL_MIB is not yet available." ::= { cpmCallHistorySummary 3 } cpmCallHistorySummaryEntry OBJECT-TYPE SYNTAX CpmCallHistorySummaryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Call Summary table." INDEX { cpmCallDisconnectTimeIndex, cpmCallStartTimeIndex, cpmCallHistorySummaryIndex } ::= { cpmCallHistorySummaryTable 1 } CpmCallHistorySummaryEntry ::= SEQUENCE { cpmCallDisconnectTimeIndex TimeStamp, cpmCallStartTimeIndex TimeStamp, cpmCallHistorySummaryIndex INTEGER, cpmUserID DisplayString, cpmUserIpAddr IpAddress, cpmCallType INTEGER, cpmModemSlot INTEGER, cpmModemPort INTEGER, cpmCallDuration TimeTicks, cpmEntrySlot INTEGER, cpmEntryPort INTEGER, cpmEntryChannel INTEGER, cpmRemotePhoneNumber DisplayString, cpmLocalPhoneNumber DisplayString, cpmTTYNumber INTEGER } cpmCallDisconnectTimeIndex OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS not-accessible STATUS mandatory DESCRIPTION "The disconnect time of the call." ::= { cpmCallHistorySummaryEntry 1 } cpmCallStartTimeIndex OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS not-accessible STATUS mandatory DESCRIPTION "The start time of the current call." ::= { cpmCallHistorySummaryEntry 2 } cpmCallHistorySummaryIndex OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "Arbitrary small integer to distinguish calls that occured at the same time tick." ::= { cpmCallHistorySummaryEntry 3 } cpmUserID OBJECT-TYPE SYNTAX DisplayString(SIZE(0..255)) -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The User login ID or zero length string if unavailable. This object comes directly from IOS." ::= { cpmCallHistorySummaryEntry 4 } cpmUserIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP address of the call or 0.0.0.0 if unavailable. This object comes directly from IOS." ::= { cpmCallHistorySummaryEntry 5 } cpmCallType OBJECT-TYPE SYNTAX INTEGER { unknown(1), analog(2), digital(3), v110(4), v120(5), voice(6) } ACCESS read-only STATUS mandatory DESCRIPTION "The call type: unknown - None of the following analog - Modem call digital - Digital call v110 - V110 Call v120 - V120 Call voice - Voice Call" ::= { cpmCallHistorySummaryEntry 6 } cpmModemSlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Identification of modem resource allocated to call. This is the value of cmSlotIndex from CISCO-MODEM-MGMT-MIB. This value along with cpmModemPort uniquely identifies a modem. Value is -1 if call does not utilize a modem." ::= { cpmCallHistorySummaryEntry 7 } cpmModemPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Identification of modem resource allocated to call. This is the value of cmPortIndex from CISCO-MODEM-MGMT-MIB. This value along with cpmModemSlot uniquely identifies a modem. Value is -1 if call does not utilize a modem." ::= { cpmCallHistorySummaryEntry 8 } cpmCallDuration OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The duration of the current call." ::= { cpmCallHistorySummaryEntry 9 } cpmEntrySlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The physical system slot in which the DS1 line that the user connected on resides." ::= { cpmCallHistorySummaryEntry 10 } cpmEntryPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The logical port for the DS1 line that the user connected on." ::= { cpmCallHistorySummaryEntry 11 } cpmEntryChannel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The channel within the DS1 that is allocated to the call." ::= { cpmCallHistorySummaryEntry 12 } cpmRemotePhoneNumber OBJECT-TYPE SYNTAX DisplayString(SIZE(0..255)) -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The remote telephone number. For a call into the device, this is the originating number. For a call out of the device, this is the dialed number. If not available the string length is zero." ::= { cpmCallHistorySummaryEntry 13 } cpmLocalPhoneNumber OBJECT-TYPE SYNTAX DisplayString(SIZE(0..255)) -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The local telephone number. For a call into the device, this is the dialed number. For a call out of the device, this is the originating number. If not available the string length is zero." ::= { cpmCallHistorySummaryEntry 14 } cpmTTYNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The TTY number associated with this call. This information comes from the IOS 'show line' command." ::= { cpmCallHistorySummaryEntry 15 } cpmDS1LoopbackNotifyEnable OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This variable controls the generation of cpmDS1LoopbackNotification When this variable is 'true(1)', generation of these notification is enabled. When this variable is 'false(2)', generation is disabled The default value is 'false(2)'. " ::= { cpmDS1LoopbackNotifyConfig 1 } cpmDS0BusyoutNotification TRAP-TYPE -- Reverse mappable trap ENTERPRISE cPopMgmtMIBNotificationPrefix VARIABLES { cpmDS0BusyoutStatus, cpmDS0BusyoutTime, cpmDS0BusyoutSource, cpmDS0InterfaceIndex } -- Status -- mandatory DESCRIPTION "This notification is sent when there is a state change in cpmDS0BusyoutStatus object." ::= 1 cpmDS1LoopbackNotification TRAP-TYPE -- Reverse mappable trap ENTERPRISE cPopMgmtMIBNotificationPrefix VARIABLES { dsx1LineStatus, dsx1LineIndex } -- Status -- mandatory DESCRIPTION "This notification is sent when there is a state change in dsx1LineStatus object of RFC1406-MIB." ::= 2 cpmDS0UsageGroup OBJECT IDENTIFIER ::= { cpmMIBGroups 1 } -- OBJECT-GROUP -- Status -- obsolete -- Descr -- A collection of objects providing the analog and -- digital statistics for a DS1. -- objects -- cpmConfiguredType, cpmDS0CallType, cpmL2Encapsulation, -- cpmCallCount, cpmTimeInUse, cpmInOctets, cpmOutOctets, -- cpmInPackets, cpmOutPackets, cpmAssociatedInterface, -- cpmISDNCfgBChanInUseForAnalog, cpmISDNCfgBChannelsInUse, -- cpmActiveDS0s, cpmPPPCalls, cpmV120Calls, cpmV110Calls cpmCallFailureGroup OBJECT IDENTIFIER ::= { cpmMIBGroups 2 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing aggregate -- totals of call failures -- objects -- cpmISDNCallsRejected, cpmModemCallsRejected, -- cpmISDNCallsClearedAbnormally, cpmModemCallsClearedAbnormally, -- cpmISDNNoResource, cpmModemNoResource cpmActiveCallSummaryGroup OBJECT IDENTIFIER ::= { cpmMIBGroups 3 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing the summary of the -- currently active calls. -- objects -- cpmActiveUserID, cpmActiveCallType, cpmActiveUserIpAddr, -- cpmActiveModemSlot, cpmActiveModemPort, cpmActiveCallDuration, -- cpmActiveEntrySlot, cpmActiveEntryPort, cpmActiveEntryChannel, -- cpmActiveRemotePhoneNumber, cpmActiveLocalPhoneNumber, -- cpmActiveTTYNumber cpmCallHistorySummaryGroup OBJECT IDENTIFIER ::= { cpmMIBGroups 4 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing the summary of calls -- that were recently terminated. -- objects -- cpmCallHistorySummaryTableMaxLength, -- cpmCallHistorySummaryRetainTimer, cpmUserID, cpmUserIpAddr, -- cpmCallType, cpmModemSlot, cpmModemPort, cpmCallDuration, -- cpmEntrySlot, cpmEntryPort, cpmEntryChannel, -- cpmRemotePhoneNumber, cpmLocalPhoneNumber, cpmTTYNumber cpmDS0UsageGroupRev1 OBJECT IDENTIFIER ::= { cpmMIBGroups 5 } -- OBJECT-GROUP -- Status -- obsolete -- Descr -- A collection of objects providing the analog and -- digital statistics for a DS1. -- objects -- cpmConfiguredType, cpmDS0CallType, cpmL2Encapsulation, -- cpmCallCount, cpmTimeInUse, cpmInOctets, cpmOutOctets, -- cpmInPackets, cpmOutPackets, cpmAssociatedInterface, -- cpmISDNCfgBChanInUseForAnalog, cpmISDNCfgBChannelsInUse, -- cpmActiveDS0s, cpmPPPCalls, cpmV120Calls, cpmV110Calls, -- cpmActiveDS0sHighWaterMark, cpmDS1ActiveDS0s, -- cpmDS1ActiveDS0sHighWaterMark, cpmSW56CfgBChannelsInUse cpmDS0UsageGroupRev2 OBJECT IDENTIFIER ::= { cpmMIBGroups 6 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing the analog and -- digital statistics for a DS1. -- objects -- cpmConfiguredType, cpmDS0CallType, cpmL2Encapsulation, -- cpmCallCount, cpmTimeInUse, cpmInOctets, cpmOutOctets, -- cpmInPackets, cpmOutPackets, cpmAssociatedInterface, -- cpmISDNCfgBChanInUseForAnalog, cpmISDNCfgBChannelsInUse, -- cpmActiveDS0s, cpmPPPCalls, cpmV120Calls, cpmV110Calls, -- cpmActiveDS0sHighWaterMark, cpmDS1ActiveDS0s, -- cpmDS1ActiveDS0sHighWaterMark, cpmSW56CfgBChannelsInUse, -- cpmISDNCfgBChanInUseForVoice, cpmCASCfgBChanInUseForVoice cpmDS1UsageGroup OBJECT IDENTIFIER ::= { cpmMIBGroups 7 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing statistics aggregation -- across DS0s within a DS1. -- objects -- cpmDS1TotalAnalogCalls, cpmDS1TotalDigitalCalls, -- cpmDS1TotalV110Calls, cpmDS1TotalV120Calls, cpmDS1TotalCalls, -- cpmDS1TotalTimeInUse, cpmDS1CurrentIdle, -- cpmDS1CurrentOutOfService, cpmDS1CurrentBusyout, -- cpmDS1InOctets, cpmDS1OutOctets, cpmDS1InPackets, -- cpmDS1OutPackets cpmSystemGroup OBJECT IDENTIFIER ::= { cpmMIBGroups 8 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing statistics aggregation -- for the entire system. -- objects -- cpmISDNCfgActiveDChannels, cpmISDNCfgBChannelsTimeInUse, -- cpmISDNCfgBChannelsTimeInUseAnlg, cpmISDNCfgBChannelCalls, -- cpmISDNCfgBChannelAnalogCalls, cpmTotalISDNSyncPPPCalls cpmDS0StatusGroup OBJECT IDENTIFIER ::= { cpmMIBGroups 9 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing the status for a DS0. -- objects -- cpmDS0BusyoutNotifyEnable, cpmDS0OperStatus, -- cpmDS0BusyoutAdminStatus, cpmDS0BusyoutAllow, -- cpmDS0BusyoutStatus, cpmDS0BusyoutSource, cpmDS0BusyoutTime, -- cpmDS0ConfigFunction, cpmDS0InterfaceIndex cpmDS1LoopbackNotifyConfigGroup OBJECT IDENTIFIER ::= { cpmMIBGroups 11 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing the -- notification configuration -- objects -- cpmDS1LoopbackNotifyEnable cpmCallVolumeGroup OBJECT IDENTIFIER ::= { cpmMIBGroups 12 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing aggregate -- totals of call successfully completed -- objects -- cpmCallVolSuccISDNDigital, -- cpmCallVolAnalogCallClearedNormally cpmNotificationGroup OBJECT IDENTIFIER ::= { cpmMIBGroups 10 } -- NOTIFICATION-GROUP -- Status -- deprecated -- Descr -- The collection of notifications -- notifications -- cpmDS0BusyoutNotification cpmNotificationGroupRev1 OBJECT IDENTIFIER ::= { cpmMIBGroups 13 } -- NOTIFICATION-GROUP -- Status -- mandatory -- Descr -- The collection of notifications -- notifications -- cpmDS0BusyoutNotification, cpmDS1LoopbackNotification cpmMIBCompliance OBJECT IDENTIFIER ::= { cpmMIBCompliances 1 } -- MODULE-COMPLIANCE -- Status -- obsolete -- Descr -- The compliance statement used in a PoPM Stack, -- which implement the Cisco PoP Management MIB -- Module -- >>current<< -- MandGroup -- cpmDS0UsageGroup -- MandGroup -- cpmCallFailureGroup -- MandGroup -- cpmActiveCallSummaryGroup -- MandGroup -- cpmCallHistorySummaryGroup cpmMIBComplianceRev1 OBJECT IDENTIFIER ::= { cpmMIBCompliances 2 } -- MODULE-COMPLIANCE -- Status -- obsolete -- Descr -- The compliance statement used in a PoPM Stack, -- which implement the Cisco PoP Management MIB -- Module -- >>current<< -- MandGroup -- cpmDS0UsageGroupRev1 -- MandGroup -- cpmCallFailureGroup -- MandGroup -- cpmActiveCallSummaryGroup -- MandGroup -- cpmCallHistorySummaryGroup cpmComplianceRev2 OBJECT IDENTIFIER ::= { cpmMIBCompliances 3 } -- MODULE-COMPLIANCE -- Status -- obsolete -- Descr -- The compliance statement used in a PoPM Stack, -- which implement the Cisco PoP Management MIB -- Module -- >>current<< -- MandGroup -- cpmDS0UsageGroupRev2 -- MandGroup -- cpmCallFailureGroup -- MandGroup -- cpmActiveCallSummaryGroup -- MandGroup -- cpmCallHistorySummaryGroup cpmMIBComplianceRev3 OBJECT IDENTIFIER ::= { cpmMIBCompliances 4 } -- MODULE-COMPLIANCE -- Status -- deprecated -- Descr -- The compliance statement used in a PoPM Stack, -- which implement the Cisco PoP Management MIB -- Module -- >>current<< -- MandGroup -- cpmDS0UsageGroupRev2 -- MandGroup -- cpmCallFailureGroup -- MandGroup -- cpmActiveCallSummaryGroup -- MandGroup -- cpmCallHistorySummaryGroup -- OptGroup -- cpmDS0StatusGroup -- OptGroup -- cpmDS1UsageGroup -- OptGroup -- cpmSystemGroup -- OptGroup -- cpmNotificationGroup cpmMIBComplianceRev4 OBJECT IDENTIFIER ::= { cpmMIBCompliances 5 } -- MODULE-COMPLIANCE -- Status -- deprecated -- Descr -- The compliance statement used in a PoPM Stack, -- which implement the Cisco PoP Management MIB -- Module -- >>current<< -- MandGroup -- cpmDS0UsageGroupRev2 -- MandGroup -- cpmCallFailureGroup -- MandGroup -- cpmActiveCallSummaryGroup -- MandGroup -- cpmCallHistorySummaryGroup -- MandGroup -- cpmCallVolumeGroup -- OptGroup -- cpmDS0StatusGroup -- OptGroup -- cpmDS1UsageGroup -- OptGroup -- cpmSystemGroup cpmMIBComplianceRev5 OBJECT IDENTIFIER ::= { cpmMIBCompliances 6 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- The compliance statement used in a PoPM Stack, -- which implement the Cisco PoP Management MIB -- Module -- >>current<< -- MandGroup -- cpmDS0UsageGroupRev2 -- MandGroup -- cpmCallFailureGroup -- MandGroup -- cpmActiveCallSummaryGroup -- MandGroup -- cpmCallHistorySummaryGroup -- MandGroup -- cpmCallVolumeGroup -- OptGroup -- cpmDS0StatusGroup -- OptGroup -- cpmDS1UsageGroup -- OptGroup -- cpmSystemGroup -- OptGroup -- cpmDS1LoopbackNotifyConfigGroup -- OptGroup -- cpmNotificationGroupRev1 END