-- MIB file created 22-Jan-2006 21:00:53, by
--   SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com

CISCO-PROXY-CONTROL-MIB DEFINITIONS ::= BEGIN

-- From file: "CISCO-PROXY-CONTROL-MIB.my"
-- Compile options "4 7 F H N O W 03 06 0B 0G 0N 0T"

IMPORTS
    CvcGUid
            FROM CISCO-VOICE-COMMON-DIAL-CONTROL-MIB
    callActiveSetupTime, callActiveIndex, AbsoluteCounter32
            FROM DIAL-CONTROL-MIB
    cCallHistoryIndex
            FROM CISCO-DIAL-CONTROL-MIB
    ciscoExperiment
            FROM CISCO-SMI
    IpAddress
            FROM RFC1155-SMI
    OBJECT-TYPE
            FROM RFC-1212;

ciscoProxyControlMIB OBJECT IDENTIFIER ::= { ciscoExperiment 57 }
-- MODULE-IDENTITY
--  LastUpdated
--    200503060000Z
--  OrgName
--    Cisco Systems, Inc.
--  ContactInfo
--           Cisco Systems, Inc. 
--            Customer Service 
--    
--    Postal: 170 W. Tasman Drive 
--            San Jose, CA  95134 
--            USA 
--    
--    Tel: +1 800 553-NETS 
--    
--    E-mail: cs-voice@cisco.com
--  Descr
--    This MIB module enhances the IETF Dial Control MIB 
--     (RFC2128) by providing Proxy management information.
--  RevDate
--    200503060000Z
--  RevDescr
--    Added gsmAmrNb enum to CProxyAudioCodec textual 
--     convention.
--  RevDate
--    200002040000Z
--  RevDescr
--    First release of this MIB.

ciscoProxyControlMIBObjects OBJECT IDENTIFIER ::= { ciscoProxyControlMIB 1 }
cProxyCallActive OBJECT IDENTIFIER ::= { ciscoProxyControlMIBObjects 1 }
cProxyCallHistory OBJECT IDENTIFIER ::= { ciscoProxyControlMIBObjects 2 }
ciscoProxyControlMIBNotificationPrefix OBJECT IDENTIFIER ::= { ciscoProxyControlMIB 2 }
ciscoProxyControlMIBNotifications OBJECT IDENTIFIER ::= { ciscoProxyControlMIBNotificationPrefix 0 }
ciscoProxyControlMIBConformance OBJECT IDENTIFIER ::= { ciscoProxyControlMIB 3 }
ciscoProxyControlMIBCompliances OBJECT IDENTIFIER ::= { ciscoProxyControlMIBConformance 1 }
ciscoProxyControlMIBGroups OBJECT IDENTIFIER ::= { ciscoProxyControlMIBConformance 2 }

CProxyEndptType ::= INTEGER {
        --?? enum value of zero may cause problems
        other(0),
        proxy(1),
        gateway(2)
        }
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    A tag to identify the type of end point that the Proxy 
--     is connected to.

CProxyAudioCodec ::= INTEGER {
        --?? enum value of zero may cause problems
        other(0),
        nonStandard(1),
        g711Alawr64k(2),
        g711Alawr56k(3),
        g711Ulawr64k(4),
        g711Ulawr56k(5),
        g722r64k(6),
        g722r56k(7),
        g722r48k(8),
        g7231(9),
        g728(10),
        g729(11),
        g729AnnexA(12),
        is11172(13),
        is13818(14),
        g729AnnexB(15),
        g729AnnexAB(16),
        g729AnnexC(17),
        gsmFullRate(18),
        gsmHalfRate(19),
        gsmEnhancedFullRate(20),
        gsmAmrNb(21)
        }
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    A tag to identify the type of encoding used to compress 
--     the voice data of the call.

CProxyVideoCodec ::= INTEGER {
        --?? enum value of zero may cause problems
        other(0),
        nonStandard(1),
        h261(2),
        h262(3),
        h263(4),
        is11172(5)
        }
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    A tag to identify the type of encoding used to compress 
--     the video data of the call.

cProxyCallActiveTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CProxyCallActiveEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table is the Proxy extension to the call Active 
         table of IETF Dial Control MIB. It contains Proxy call 
         leg information about specific proxied calls."
    REFERENCE
        "IETF Dial Control MIB (RFC2128)"
    ::= { cProxyCallActive 1 }

cProxyCallActiveEntry OBJECT-TYPE
    SYNTAX CProxyCallActiveEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The information regarding a single proxied call leg. 
         An entry of this table is created when its associated call 
         Active entry in the IETF Dial Control MIB is created and 
         the call Active entry contains information for the call 
         establishment to the peer on the data network. 
         This entry is deleted when its associated Call Active 
         entry in the IETF Dial Control MIB is deleted."
    INDEX { callActiveSetupTime, callActiveIndex }
    ::= { cProxyCallActiveTable 1 }

CProxyCallActiveEntry ::= SEQUENCE {
    cProxyCallActiveConnectionId CvcGUid,
    cProxyCallActiveRemoteIPAddress IpAddress,
    cProxyCallActiveAudioUDPPort INTEGER,
    cProxyCallActiveVideoUDPPort INTEGER,
    cProxyCallActiveT120TCPPort1 INTEGER,
    cProxyCallActiveT120TCPPort2 INTEGER,
    cProxyCallActiveT120TCPPort3 INTEGER,
    cProxyCallActiveT120TCPPort4 INTEGER,
    cProxyCallActiveEndpointType CProxyEndptType,
    cProxyCallActiveEndpointVendor INTEGER,
    cProxyCallActiveRequestBandwidth INTEGER,
    cProxyCallActiveActualBandwidth INTEGER,
    cProxyCallActiveAudioCoderRate CProxyAudioCodec,
    cProxyCallActiveVideoCoderRate CProxyVideoCodec,
    cProxyCallActiveRxAudioPackets AbsoluteCounter32,
    cProxyCallActiveRxAudioBytes AbsoluteCounter32,
    cProxyCallActiveTxAudioPackets AbsoluteCounter32,
    cProxyCallActiveTxAudioBytes AbsoluteCounter32,
    cProxyCallActiveRxVideoPackets AbsoluteCounter32,
    cProxyCallActiveRxVideoBytes AbsoluteCounter32,
    cProxyCallActiveTxVideoPackets AbsoluteCounter32,
    cProxyCallActiveTxVideoBytes AbsoluteCounter32,
    cProxyCallActiveRxT120Packets AbsoluteCounter32,
    cProxyCallActiveRxT120Bytes AbsoluteCounter32,
    cProxyCallActiveTxT120Packets AbsoluteCounter32,
    cProxyCallActiveTxT120Bytes AbsoluteCounter32
    }

cProxyCallActiveConnectionId OBJECT-TYPE
    SYNTAX CvcGUid
--    Rsyntax OCTET STRING(SIZE(0..16))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The global call identifier for the Proxy call."
    ::= { cProxyCallActiveEntry 1 }

cProxyCallActiveRemoteIPAddress OBJECT-TYPE
    SYNTAX IpAddress
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Remote system IP address for the call."
    ::= { cProxyCallActiveEntry 2 }

cProxyCallActiveAudioUDPPort OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Remote system UDP listener port to which to transmit 
         voice packets for the call. A value of zero indicates 
         that no port was used."
    ::= { cProxyCallActiveEntry 3 }

cProxyCallActiveVideoUDPPort OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Remote system UDP listener port to which to transmit  
         video packets for the call. A value of zero indicates 
         that no port was used."
    ::= { cProxyCallActiveEntry 4 }

cProxyCallActiveT120TCPPort1 OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "First remote system UDP listener port to which to transmit 
         T120 packets for the call.  A value of zero indicates that 
         no port was used."
    ::= { cProxyCallActiveEntry 5 }

cProxyCallActiveT120TCPPort2 OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Second remote system UDP listener port to which to 
         transmit T120 packets for the call.  A value of zero 
         indicates that no port was used."
    ::= { cProxyCallActiveEntry 6 }

cProxyCallActiveT120TCPPort3 OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Third remote system UDP listener port to which to transmit 
         T120 packets for the call.  A value of zero indicates that 
         no port was used."
    ::= { cProxyCallActiveEntry 7 }

cProxyCallActiveT120TCPPort4 OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Fourth remote system UDP listener port to which to transmit 
         T120 packets for the call.  A value of zero indicates that 
         no port was used."
    ::= { cProxyCallActiveEntry 8 }

cProxyCallActiveEndpointType OBJECT-TYPE
    SYNTAX CProxyEndptType
--    Rsyntax INTEGER {
--        ?? enum value of zero may cause problems
--        other(0),
--        proxy(1),
--        gateway(2)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The type of end point this proxy call leg is connected to."
    ::= { cProxyCallActiveEntry 9 }

cProxyCallActiveEndpointVendor OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The H225 Manufacturers code for this endpoint. 
         Zero indicates unknown vendor."
    ::= { cProxyCallActiveEntry 10 }

cProxyCallActiveRequestBandwidth OBJECT-TYPE
    SYNTAX INTEGER(0..10000000)
--  Units
--    kilobits per second
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The requested bandwidth for this proxied call leg."
    ::= { cProxyCallActiveEntry 11 }

cProxyCallActiveActualBandwidth OBJECT-TYPE
    SYNTAX INTEGER(0..10000000)
--  Units
--    kilobits per second
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The actual bandwidth used by the proxied call."
    ::= { cProxyCallActiveEntry 12 }

cProxyCallActiveAudioCoderRate OBJECT-TYPE
    SYNTAX CProxyAudioCodec
--    Rsyntax INTEGER {
--        ?? enum value of zero may cause problems
--        other(0),
--        nonStandard(1),
--        g711Alawr64k(2),
--        g711Alawr56k(3),
--        g711Ulawr64k(4),
--        g711Ulawr56k(5),
--        g722r64k(6),
--        g722r56k(7),
--        g722r48k(8),
--        g7231(9),
--        g728(10),
--        g729(11),
--        g729AnnexA(12),
--        is11172(13),
--        is13818(14),
--        g729AnnexB(15),
--        g729AnnexAB(16),
--        g729AnnexC(17),
--        gsmFullRate(18),
--        gsmHalfRate(19),
--        gsmEnhancedFullRate(20),
--        gsmAmrNb(21)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The negotiated coder rate. It specifies the transmit 
         rate of audio compression to its associated call leg 
         for the call."
    ::= { cProxyCallActiveEntry 13 }

cProxyCallActiveVideoCoderRate OBJECT-TYPE
    SYNTAX CProxyVideoCodec
--    Rsyntax INTEGER {
--        ?? enum value of zero may cause problems
--        other(0),
--        nonStandard(1),
--        h261(2),
--        h262(3),
--        h263(4),
--        is11172(5)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The negotiated coder rate. It specifies the transmit 
         rate of video compression to its associated call leg 
         for the call."
    ::= { cProxyCallActiveEntry 14 }

cProxyCallActiveRxAudioPackets OBJECT-TYPE
    SYNTAX AbsoluteCounter32
--    Rsyntax Gauge
--  Units
--    packets
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of audio packets received from the remote 
         end for this call."
    ::= { cProxyCallActiveEntry 15 }

cProxyCallActiveRxAudioBytes OBJECT-TYPE
    SYNTAX AbsoluteCounter32
--    Rsyntax Gauge
--  Units
--    bytes
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of audio bytes received from the remote 
         end for this call."
    ::= { cProxyCallActiveEntry 16 }

cProxyCallActiveTxAudioPackets OBJECT-TYPE
    SYNTAX AbsoluteCounter32
--    Rsyntax Gauge
--  Units
--    packets
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of audio packets transmitted to the remote 
         end for this call."
    ::= { cProxyCallActiveEntry 17 }

cProxyCallActiveTxAudioBytes OBJECT-TYPE
    SYNTAX AbsoluteCounter32
--    Rsyntax Gauge
--  Units
--    bytes
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of audio bytes transmitted to the remote 
         end for this call."
    ::= { cProxyCallActiveEntry 18 }

cProxyCallActiveRxVideoPackets OBJECT-TYPE
    SYNTAX AbsoluteCounter32
--    Rsyntax Gauge
--  Units
--    packets
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of video packets received from the remote 
         end for this call."
    ::= { cProxyCallActiveEntry 19 }

cProxyCallActiveRxVideoBytes OBJECT-TYPE
    SYNTAX AbsoluteCounter32
--    Rsyntax Gauge
--  Units
--    bytes
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of video bytes received from the remote 
         end for this call."
    ::= { cProxyCallActiveEntry 20 }

cProxyCallActiveTxVideoPackets OBJECT-TYPE
    SYNTAX AbsoluteCounter32
--    Rsyntax Gauge
--  Units
--    packets
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of video packets transmitted to the remote 
         end for this call."
    ::= { cProxyCallActiveEntry 21 }

cProxyCallActiveTxVideoBytes OBJECT-TYPE
    SYNTAX AbsoluteCounter32
--    Rsyntax Gauge
--  Units
--    bytes
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of video bytes transmitted to the remote 
         end for this call."
    ::= { cProxyCallActiveEntry 22 }

cProxyCallActiveRxT120Packets OBJECT-TYPE
    SYNTAX AbsoluteCounter32
--    Rsyntax Gauge
--  Units
--    packets
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of T120 data packets received from the 
         remote end for this call."
    ::= { cProxyCallActiveEntry 23 }

cProxyCallActiveRxT120Bytes OBJECT-TYPE
    SYNTAX AbsoluteCounter32
--    Rsyntax Gauge
--  Units
--    bytes
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of T120 data bytes received from the remote 
         end of this call."
    ::= { cProxyCallActiveEntry 24 }

cProxyCallActiveTxT120Packets OBJECT-TYPE
    SYNTAX AbsoluteCounter32
--    Rsyntax Gauge
--  Units
--    packets
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of T120 data packets transmitted to the remote 
         end for this call."
    ::= { cProxyCallActiveEntry 25 }

cProxyCallActiveTxT120Bytes OBJECT-TYPE
    SYNTAX AbsoluteCounter32
--    Rsyntax Gauge
--  Units
--    bytes
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of T120 data bytes transmitted to the remote 
         end of this call."
    ::= { cProxyCallActiveEntry 26 }

cProxyCallHistoryTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CProxyCallHistoryEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table is the Proxy extension to the History call table 
         of IETF Dial Control MIB. It contains PROXY call leg 
         information about proxied call."
    REFERENCE
        "IETF Dial Control MIB (RFC2128)"
    ::= { cProxyCallHistory 1 }

cProxyCallHistoryEntry OBJECT-TYPE
    SYNTAX CProxyCallHistoryEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The information regarding a single proxied call leg. 
         An entry of this table is created when its associated call 
         History entry in the IETF Dial Control MIB is created. The 
         call History entry contains information for the call 
         establishment to the peer on the data network backbone via 
         a voice over PROXY peer. 
         The entry is deleted when its associated call History entry 
         in the IETF Dial Control MIB is deleted."
    INDEX { cCallHistoryIndex }
    ::= { cProxyCallHistoryTable 1 }

CProxyCallHistoryEntry ::= SEQUENCE {
    cProxyCallHistoryConnectionId CvcGUid,
    cProxyCallHistoryRemoteIPAddress IpAddress,
    cProxyCallHistoryAudioUDPPort INTEGER,
    cProxyCallHistoryVideoUDPPort INTEGER,
    cProxyCallHistoryT120TCPPort1 INTEGER,
    cProxyCallHistoryT120TCPPort2 INTEGER,
    cProxyCallHistoryT120TCPPort3 INTEGER,
    cProxyCallHistoryT120TCPPort4 INTEGER,
    cProxyCallHistoryEndpointType CProxyEndptType,
    cProxyCallHistoryEndpointVendor INTEGER,
    cProxyCallHistoryRequestBandwidth INTEGER,
    cProxyCallHistoryActualBandwidth INTEGER,
    cProxyCallHistoryAudioCoderRate CProxyAudioCodec,
    cProxyCallHistoryVideoCoderRate CProxyVideoCodec,
    cProxyCallHistoryRxAudioPackets AbsoluteCounter32,
    cProxyCallHistoryRxAudioBytes AbsoluteCounter32,
    cProxyCallHistoryTxAudioPackets AbsoluteCounter32,
    cProxyCallHistoryTxAudioBytes AbsoluteCounter32,
    cProxyCallHistoryRxVideoPackets AbsoluteCounter32,
    cProxyCallHistoryRxVideoBytes AbsoluteCounter32,
    cProxyCallHistoryTxVideoPackets AbsoluteCounter32,
    cProxyCallHistoryTxVideoBytes AbsoluteCounter32,
    cProxyCallHistoryRxT120Packets AbsoluteCounter32,
    cProxyCallHistoryRxT120Bytes AbsoluteCounter32,
    cProxyCallHistoryTxT120Packets AbsoluteCounter32,
    cProxyCallHistoryTxT120Bytes AbsoluteCounter32
    }

cProxyCallHistoryConnectionId OBJECT-TYPE
    SYNTAX CvcGUid
--    Rsyntax OCTET STRING(SIZE(0..16))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The global call identifier for the Proxy call."
    ::= { cProxyCallHistoryEntry 1 }

cProxyCallHistoryRemoteIPAddress OBJECT-TYPE
    SYNTAX IpAddress
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Remote system IP address for the call."
    ::= { cProxyCallHistoryEntry 2 }

cProxyCallHistoryAudioUDPPort OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Remote system UDP listener port to which to transmit  
         voice packets for the call. A value of zero indicates 
         that no port was used."
    ::= { cProxyCallHistoryEntry 3 }

cProxyCallHistoryVideoUDPPort OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Remote system UDP listener port to which to transmit  
         video packets for the call. A value of zero indicates 
         that no port was used."
    ::= { cProxyCallHistoryEntry 4 }

cProxyCallHistoryT120TCPPort1 OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "First remote system UDP listener port to which to  
         transmit T120 packets for the call.  A value of zero 
         indicates that no port was used."
    ::= { cProxyCallHistoryEntry 5 }

cProxyCallHistoryT120TCPPort2 OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Second remote system UDP listener port to which to 
         transmit T120 packets for the call.  A value of zero 
         indicates that no port was used."
    ::= { cProxyCallHistoryEntry 6 }

cProxyCallHistoryT120TCPPort3 OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Third remote system UDP listener port to which to 
         transmit T120 packets for the call.  A value of zero 
         indicates that no port was used."
    ::= { cProxyCallHistoryEntry 7 }

cProxyCallHistoryT120TCPPort4 OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Fourth remote system UDP listener port to which to 
         transmit T120 packets for the call.  A value of zero 
         indicates that no port was used."
    ::= { cProxyCallHistoryEntry 8 }

cProxyCallHistoryEndpointType OBJECT-TYPE
    SYNTAX CProxyEndptType
--    Rsyntax INTEGER {
--        ?? enum value of zero may cause problems
--        other(0),
--        proxy(1),
--        gateway(2)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The type of end point this proxy call leg is connected to."
    ::= { cProxyCallHistoryEntry 9 }

cProxyCallHistoryEndpointVendor OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The H225 Manufacturers code for this endpoint. 
         Zero indicates unknown vendor."
    ::= { cProxyCallHistoryEntry 10 }

cProxyCallHistoryRequestBandwidth OBJECT-TYPE
    SYNTAX INTEGER(0..10000000)
--  Units
--    kilobits per second
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The requested bandwidth for this proxied call leg."
    ::= { cProxyCallHistoryEntry 11 }

cProxyCallHistoryActualBandwidth OBJECT-TYPE
    SYNTAX INTEGER(0..10000000)
--  Units
--    kilobits per second
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The actual bandwidth used by the proxied call."
    ::= { cProxyCallHistoryEntry 12 }

cProxyCallHistoryAudioCoderRate OBJECT-TYPE
    SYNTAX CProxyAudioCodec
--    Rsyntax INTEGER {
--        ?? enum value of zero may cause problems
--        other(0),
--        nonStandard(1),
--        g711Alawr64k(2),
--        g711Alawr56k(3),
--        g711Ulawr64k(4),
--        g711Ulawr56k(5),
--        g722r64k(6),
--        g722r56k(7),
--        g722r48k(8),
--        g7231(9),
--        g728(10),
--        g729(11),
--        g729AnnexA(12),
--        is11172(13),
--        is13818(14),
--        g729AnnexB(15),
--        g729AnnexAB(16),
--        g729AnnexC(17),
--        gsmFullRate(18),
--        gsmHalfRate(19),
--        gsmEnhancedFullRate(20),
--        gsmAmrNb(21)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The negotiated coder rate. It specifies the transmit 
         rate of audio compression to its associated call leg 
         for the call."
    ::= { cProxyCallHistoryEntry 13 }

cProxyCallHistoryVideoCoderRate OBJECT-TYPE
    SYNTAX CProxyVideoCodec
--    Rsyntax INTEGER {
--        ?? enum value of zero may cause problems
--        other(0),
--        nonStandard(1),
--        h261(2),
--        h262(3),
--        h263(4),
--        is11172(5)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The negotiated coder rate. It specifies the transmit 
         rate of video compression to its associated call leg 
         for the call."
    ::= { cProxyCallHistoryEntry 14 }

cProxyCallHistoryRxAudioPackets OBJECT-TYPE
    SYNTAX AbsoluteCounter32
--    Rsyntax Gauge
--  Units
--    packets
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of audio packets received from the remote 
         end for this call."
    ::= { cProxyCallHistoryEntry 15 }

cProxyCallHistoryRxAudioBytes OBJECT-TYPE
    SYNTAX AbsoluteCounter32
--    Rsyntax Gauge
--  Units
--    bytes
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of audio bytes received from the remote 
         end for this call."
    ::= { cProxyCallHistoryEntry 16 }

cProxyCallHistoryTxAudioPackets OBJECT-TYPE
    SYNTAX AbsoluteCounter32
--    Rsyntax Gauge
--  Units
--    packets
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of audio packets transmitted to the remote 
         end for this call."
    ::= { cProxyCallHistoryEntry 17 }

cProxyCallHistoryTxAudioBytes OBJECT-TYPE
    SYNTAX AbsoluteCounter32
--    Rsyntax Gauge
--  Units
--    bytes
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of audio bytes transmitted to the remote 
         end for this call."
    ::= { cProxyCallHistoryEntry 18 }

cProxyCallHistoryRxVideoPackets OBJECT-TYPE
    SYNTAX AbsoluteCounter32
--    Rsyntax Gauge
--  Units
--    packets
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of video packets received from the remote 
         end for this call."
    ::= { cProxyCallHistoryEntry 19 }

cProxyCallHistoryRxVideoBytes OBJECT-TYPE
    SYNTAX AbsoluteCounter32
--    Rsyntax Gauge
--  Units
--    bytes
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of video bytes received from the remote 
         end for this call."
    ::= { cProxyCallHistoryEntry 20 }

cProxyCallHistoryTxVideoPackets OBJECT-TYPE
    SYNTAX AbsoluteCounter32
--    Rsyntax Gauge
--  Units
--    packets
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of video packets transmitted to the remote 
         end for this call."
    ::= { cProxyCallHistoryEntry 21 }

cProxyCallHistoryTxVideoBytes OBJECT-TYPE
    SYNTAX AbsoluteCounter32
--    Rsyntax Gauge
--  Units
--    bytes
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of video bytes transmitted to the remote end for 
         this call."
    ::= { cProxyCallHistoryEntry 22 }

cProxyCallHistoryRxT120Packets OBJECT-TYPE
    SYNTAX AbsoluteCounter32
--    Rsyntax Gauge
--  Units
--    packets
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of T120 data packets received from the remote 
         end for this call."
    ::= { cProxyCallHistoryEntry 23 }

cProxyCallHistoryRxT120Bytes OBJECT-TYPE
    SYNTAX AbsoluteCounter32
--    Rsyntax Gauge
--  Units
--    bytes
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of T120 data bytes received from the remote 
         end for this call."
    ::= { cProxyCallHistoryEntry 24 }

cProxyCallHistoryTxT120Packets OBJECT-TYPE
    SYNTAX AbsoluteCounter32
--    Rsyntax Gauge
--  Units
--    packets
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of T120 data packets transmitted to the remote 
         end for this call."
    ::= { cProxyCallHistoryEntry 25 }

cProxyCallHistoryTxT120Bytes OBJECT-TYPE
    SYNTAX AbsoluteCounter32
--    Rsyntax Gauge
--  Units
--    bytes
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of T120 data bytes transmitted to the remote 
         end for this call."
    ::= { cProxyCallHistoryEntry 26 }

cProxyCallActiveGroup OBJECT IDENTIFIER ::= { ciscoProxyControlMIBGroups 1 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects providing the PROXY Call Active 
--     entry capability.
--  objects
--    cProxyCallActiveConnectionId, cProxyCallActiveRemoteIPAddress, 
--    cProxyCallActiveAudioUDPPort, cProxyCallActiveVideoUDPPort, 
--    cProxyCallActiveT120TCPPort1, cProxyCallActiveT120TCPPort2, 
--    cProxyCallActiveT120TCPPort3, cProxyCallActiveT120TCPPort4, 
--    cProxyCallActiveEndpointType, cProxyCallActiveEndpointVendor, 
--    cProxyCallActiveRequestBandwidth, 
--    cProxyCallActiveActualBandwidth, 
--    cProxyCallActiveAudioCoderRate, 
--    cProxyCallActiveVideoCoderRate, 
--    cProxyCallActiveRxAudioPackets, cProxyCallActiveRxAudioBytes, 
--    cProxyCallActiveTxAudioPackets, cProxyCallActiveTxAudioBytes, 
--    cProxyCallActiveRxVideoPackets, cProxyCallActiveRxVideoBytes, 
--    cProxyCallActiveTxVideoPackets, cProxyCallActiveTxVideoBytes, 
--    cProxyCallActiveRxT120Packets, cProxyCallActiveRxT120Bytes, 
--    cProxyCallActiveTxT120Packets, cProxyCallActiveTxT120Bytes

cProxyCallHistoryGroup OBJECT IDENTIFIER ::= { ciscoProxyControlMIBGroups 2 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects providing the PROXY Call Active 
--     entry capability.
--  objects
--    cProxyCallHistoryConnectionId, 
--    cProxyCallHistoryRemoteIPAddress, 
--    cProxyCallHistoryAudioUDPPort, cProxyCallHistoryVideoUDPPort, 
--    cProxyCallHistoryT120TCPPort1, cProxyCallHistoryT120TCPPort2, 
--    cProxyCallHistoryT120TCPPort3, cProxyCallHistoryT120TCPPort4, 
--    cProxyCallHistoryEndpointType, 
--    cProxyCallHistoryEndpointVendor, 
--    cProxyCallHistoryRequestBandwidth, 
--    cProxyCallHistoryActualBandwidth, 
--    cProxyCallHistoryAudioCoderRate, 
--    cProxyCallHistoryVideoCoderRate, 
--    cProxyCallHistoryRxAudioPackets, 
--    cProxyCallHistoryRxAudioBytes, 
--    cProxyCallHistoryTxAudioPackets, 
--    cProxyCallHistoryTxAudioBytes, 
--    cProxyCallHistoryRxVideoPackets, 
--    cProxyCallHistoryRxVideoBytes, 
--    cProxyCallHistoryTxVideoPackets, 
--    cProxyCallHistoryTxVideoBytes, cProxyCallHistoryRxT120Packets, 
--    cProxyCallHistoryRxT120Bytes, cProxyCallHistoryTxT120Packets, 
--    cProxyCallHistoryTxT120Bytes

ciscoProxyControlMIBCompliance OBJECT IDENTIFIER ::= { ciscoProxyControlMIBCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    The compliance statement for entities which 
--     implement the CISCO PROXY CONTROL MIB
--  Module
--    >>current<<
--   MandGroup
--    cProxyCallActiveGroup
--   MandGroup
--    cProxyCallHistoryGroup


END