-- MIB file created 30-Jan-2003 22:49:50, by
--   SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com

CISCO-PSA-MICROCODE-MIB DEFINITIONS ::= BEGIN

-- From file: "CISCO-PSA-MICROCODE-MIB.my"
-- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T"

IMPORTS
    TruthValue
            FROM SNMPv2-TC-v1
    entPhysicalIndex, entPhysicalDescr, entPhysicalName
            FROM ENTITY-MIB
    ciscoMgmt
            FROM CISCO-SMI
    OBJECT-TYPE
            FROM RFC-1212
    TRAP-TYPE
            FROM RFC-1215;

ciscoPsaMicrocodeMIB OBJECT IDENTIFIER ::= { ciscoMgmt 259 }
-- MODULE-IDENTITY
--  LastUpdated
--    200206180000Z
--  OrgName
--    Cisco Systems, Inc.
--  ContactInfo
--           Cisco Systems
--            Customer Service
--    
--    Postal: 170 W. Tasman Drive
--            San Jose, CA  95134-1706
--            USA
--    
--       Tel: +1 800 553-NETS
--    
--    E-mail: gsr-netman@cisco.com
--  Descr
--    Cisco PSA Microcode MIB - Overview
--    
--    The PSA is the Packet Switching ASIC used 
--    in module like engine 2(E2) line cards in GSR
--    for IP and MPLS packets forwarding. The PSA 
--    performs IP and MPLS packet forwarding at 4 Mpps. 
--    
--    The list of features supported by the PSA 
--    includes (but is not limited to):
--    - Input and Output ACLs
--    - Frame Relay Switching
--    - PIRC
--    - MPLS VPN
--    - BGP policy accounting
--    - IP packet coloring
--    - Sampled Net flow
--    - ATM over MPLS.
--    - Source MAC Accounting.
--    - Unicast RPF
--    
--    Note that all the features are not 
--    supported simultaneously on a module. 
--    Each microcode bundle/set can support 
--    one or a limited number of the features 
--    listed above. Each feature has a priority.  
--    When a feature (ACL, Sampled NetFlow) is 
--    enabled through the CLI, the higher 
--    priority feature will take precedence 
--    over the lower priority feature.  The 
--    microcode for the lower priority is 
--    removed and cleaned up.  The higher 
--    priority microcode will be loaded.  
--    Later, if the higher priority feature 
--    is removed, the lower priority microcode 
--    will be loaded again.
--    
--    This MIB contains information about the microcode 
--    bundles on modules like  E2 Line Cards(LC) in GSR.
--    Since microcode reload is a service interrupting 
--    event, this MIB also defines a notification to
--    inform management stations that such an event has
--    taken place.
--  RevDate
--    200206180000Z
--  RevDescr
--    Initial version of this MIB module.

ciscoPsaMicrocodeMIBNotifs OBJECT IDENTIFIER ::= { ciscoPsaMicrocodeMIB 0 }
ciscoPsaMicrocodeMIBObjects OBJECT IDENTIFIER ::= { ciscoPsaMicrocodeMIB 1 }
ciscoPsaMicrocodeMIBConformance OBJECT IDENTIFIER ::= { ciscoPsaMicrocodeMIB 2 }
cpmcModulePsa   OBJECT IDENTIFIER ::= { ciscoPsaMicrocodeMIBObjects 1 }
cpmcBundle      OBJECT IDENTIFIER ::= { ciscoPsaMicrocodeMIBObjects 2 }
cpmcNotif       OBJECT IDENTIFIER ::= { ciscoPsaMicrocodeMIBObjects 3 }
ciscoPsaMicrocodeMIBCompliances OBJECT IDENTIFIER ::= { ciscoPsaMicrocodeMIBConformance 1 }
ciscoPsaMicrocodeMIBGroups OBJECT IDENTIFIER ::= { ciscoPsaMicrocodeMIBConformance 2 }

PsaMicrocodeBundleId ::= INTEGER {
        unknown(1),
        none(2),
        vanillaPOS(3),
        vanillaGE(4),
        vanillaInuit(5),
        vanillaTaz(6),
        pircPOS(7),
        pircGE(8),
        uRPFPOS(9),
        vrfSelectionPOS(10),
        bgppaPOS(11),
        bgppaGE(12),
        ipColorPOS(13),
        inputAcl128POS(14),
        inputAcl128GE(15),
        outputAcl128POS(16),
        outputAcl128GE(17),
        inputAcl448POS(18),
        inputAcl448GE(19),
        outputAcl448POS(20),
        outputAcl448GE(21),
        serverCard(22),
        eoMplsGE(23),
        frtpPOS(24),
        outputAclATM(25),
        inputAcl128Taz(26),
        vrfSelectionGE(27),
        uRPFGE(28),
        cscGE(29),
        linkBundleSMPOS(30),
        linkBundleDMPOS(31),
        linkBundleSMGE(32),
        linkBundleDMGE(33)
        }
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    The identity of a PSA microcode bundle.
--     The current microcode bundles are:
--     
--     unknown(1): Unknown Bundle. There will be
--                 no entry associated with this
--                 value in the cpmcBundleTable.
--    
--     none(2): This value is used by 
--              cpmcModulePsaPrevBundleId object
--              till the first micrcode reload
--              occurs on the psa. There will be 
--              no entry associated with this 
--              value in the cpmcBundleTable.
--    
--     vanillaPOS(3): POS Vanilla
--    
--     vanillaGE(4):  GE Vanilla
--    
--     vanillaInuit(5): Inuit Vanilla
--    
--     vanillaTaz(6): TAZ Vanilla
--    
--     pircPOS(7): POS Per Interface Rate Control
--    
--     pircGE(8): GE Per Interface Rate Control
--    
--     uRPFPOS(9): POS Unicast Reverse Path Forwarding
--    
--     vrfSelectionPOS(10): POS VRF Selection
--                 
--     bgppaPOS(11): POS BGP Policy Accounting
--    
--     bgppaGE(12):  GE BGP Policy Accounting
--    
--     ipColorPOS(13): POS IP Coloring
--    
--     inputAcl128POS(14): POS 128 Line Input ACL
--    
--     inputAcl128GE(15): GE 128 Line Input ACL
--                      
--     outputAcl128POS(16): POS 128 Line Output ACL
--     
--     outputAcl128GE(17): GE 128 Line Output ACL
--    
--     inputAcl448POS(18): POS 448 Line Input ACL
--    
--     inputAcl448GE(19): GE 448 Line Input ACL
--    
--     outputAcl448POS(20): POS 448 Line Output ACL
--    
--     outputAcl448GE(21): GE 448 Line Output ACL
--    
--     serverCard(22): Server Card
--    
--     eoMplsGE(23): GE Ethernet over MPLS
--    
--     frtpPOS(24): POS Frame Relay Traffic Policing
--    
--     outputAclATM(25): ATM Output ACL
--    
--     inputAcl128Taz(26): TAZ 128 Line Input ACL
--    
--     vrfSelectionGE(27): GE VRF Selection
--    
--     uRPFGE(28): GE Unicast Reverse Path Forwarding
--    
--     cscGE(29): GE Carrier Supporting Carriers
--    
--     linkBundleSMPOS(30): POS Link Bundle Single Mode
--    
--     linkBundleDMPOS(31): POS Link Bundle Double Mode
--    
--     linkBundleSMGE(32): GE Link Bundle Single Mode
--    
--     linkBundleDMGE(33): GE Link Bundle Double Mode
--     

PsaMicrocodeFeatures ::= OCTET STRING(SIZE(1..4))
        -- BITS are:
        --   basicIpForwarding(0)
        --   basicMplsSwitching(1)
        --   frameRelaySwitching(2)
        --   eAFrSwitching(3)
        --   frtp(4)
        --   pirc(5)
        --   vrfSelection(6)
        --   uRPF(7)
        --   inputAcl128(8)
        --   outputAcl128(9)
        --   inputAcl448(10)
        --   outputAcl448(11)
        --   sampledNetflow(12)
        --   ipMarking(13)
        --   bgppa(14)
        --   uti(15)
        --   mplsVpn(16)
        --   eoMpls(17)
        --   atmoMpls(18)
        --   csc(19)
        --   multicast(20)
        --   perPacketLoadBalancing(21)
        --   sourceMacAccounting(22)
        --   frSubVrf(23)
        --   serverCard(24)
        --   mplsSNF(25)
        --   linkBundle(26)
        --   atomDisposition(27)
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    The list of features supported on a PSA microcode
--    bundle.
--    
--    The current list of features are:
--    
--    basicIpForwarding(0): Basic IP Forwarding
--    
--    basicMplsSwitching(1): Basic MPLS Switching
--    
--    frameRelaySwitching(2): Frame Relay Switching
--    
--    eAFrSwitching(3): Extended Addressing FR Switching
--    
--    frtp(4): Frame Relay Traffic Policing
--    
--    pirc(5): PIRC
--    
--    vrfSelection(6): VRF Selection
--    
--    uRPF(7): Unicast RPF
--    
--    inputAcl128(8): 128 Line Input ACLs
--    
--    outputAcl128(9): 128 Line Output ACLs
--    
--    inputAcl448(10): 448  Line Input ACLs
--    
--    outputAcl448(11): 448  Line Output ACLs.
--    
--    sampledNetflow(12): Sampled Netflow
--    
--    ipMarking(13): IP Marking
--    
--    bgppa(14): BGP Policy Accounting
--    
--    uti(15): Universal Transport Interface
--    
--    mplsVpn(16): MPLS VPN
--    
--    eoMpls(17): Ethernet over MPLS
--    
--    atmoMpls(18): ATM over MPLS
--    
--    csc(19): Carrier Supporting Carriers
--    
--    multicast(20): Multicast
--    
--    perPacketLoadBalancing(21): Per Packet Load Balancing
--    
--    sourceMacAccounting(22): Source MAC Accounting
--    
--    frSubVrf(23): FR per-subinterface VRF processing
--    
--    serverCard(24): Server Card
--    
--    mplsSNF(25): MPLS aware Sampled Netflow
--    
--    linkBundle(26): Link Bundle
--    
--    atomDisposition(27): AToM Disposition

cpmcModulePsaTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CpmcModulePsaEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A table providing the microcode bundle information
        of those modules which contains PSA (Ex: engine 2
        line cards in GSR)."
    ::= { cpmcModulePsa 1 }

cpmcModulePsaEntry OBJECT-TYPE
    SYNTAX CpmcModulePsaEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Entries providing PSA microcode bundle information
        of those entities of type PhysicalClass module(9)
        and contain PSA."
    INDEX { entPhysicalIndex }
    ::= { cpmcModulePsaTable 1 }

CpmcModulePsaEntry ::= SEQUENCE {
    cpmcModulePsaCurrBundleId PsaMicrocodeBundleId,
    cpmcModulePsaPrevBundleId PsaMicrocodeBundleId,
    cpmcModulePsaFeaturesEnabled PsaMicrocodeFeatures,
    cpmcModulePsaFeaturesDisabled PsaMicrocodeFeatures
    }

cpmcModulePsaCurrBundleId OBJECT-TYPE
    SYNTAX PsaMicrocodeBundleId
--    Rsyntax INTEGER {
--        unknown(1),
--        none(2),
--        vanillaPOS(3),
--        vanillaGE(4),
--        vanillaInuit(5),
--        vanillaTaz(6),
--        pircPOS(7),
--        pircGE(8),
--        uRPFPOS(9),
--        vrfSelectionPOS(10),
--        bgppaPOS(11),
--        bgppaGE(12),
--        ipColorPOS(13),
--        inputAcl128POS(14),
--        inputAcl128GE(15),
--        outputAcl128POS(16),
--        outputAcl128GE(17),
--        inputAcl448POS(18),
--        inputAcl448GE(19),
--        outputAcl448POS(20),
--        outputAcl448GE(21),
--        serverCard(22),
--        eoMplsGE(23),
--        frtpPOS(24),
--        outputAclATM(25),
--        inputAcl128Taz(26),
--        vrfSelectionGE(27),
--        uRPFGE(28),
--        cscGE(29),
--        linkBundleSMPOS(30),
--        linkBundleDMPOS(31),
--        linkBundleSMGE(32),
--        linkBundleDMGE(33)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The identity of the microcode bundle currently
        loaded on the PSA of the module identified by
        entPhysicalIndex."
    ::= { cpmcModulePsaEntry 1 }

cpmcModulePsaPrevBundleId OBJECT-TYPE
    SYNTAX PsaMicrocodeBundleId
--    Rsyntax INTEGER {
--        unknown(1),
--        none(2),
--        vanillaPOS(3),
--        vanillaGE(4),
--        vanillaInuit(5),
--        vanillaTaz(6),
--        pircPOS(7),
--        pircGE(8),
--        uRPFPOS(9),
--        vrfSelectionPOS(10),
--        bgppaPOS(11),
--        bgppaGE(12),
--        ipColorPOS(13),
--        inputAcl128POS(14),
--        inputAcl128GE(15),
--        outputAcl128POS(16),
--        outputAcl128GE(17),
--        inputAcl448POS(18),
--        inputAcl448GE(19),
--        outputAcl448POS(20),
--        outputAcl448GE(21),
--        serverCard(22),
--        eoMplsGE(23),
--        frtpPOS(24),
--        outputAclATM(25),
--        inputAcl128Taz(26),
--        vrfSelectionGE(27),
--        uRPFGE(28),
--        cscGE(29),
--        linkBundleSMPOS(30),
--        linkBundleDMPOS(31),
--        linkBundleSMGE(32),
--        linkBundleDMGE(33)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The identity of the microcode bundle previously
        loaded on the PSA of the module identified by 
        entPhysicalIndex. Till the first microcode reload
        is performed on the module, the value will be
        'none(2)'."
    ::= { cpmcModulePsaEntry 2 }

cpmcModulePsaFeaturesEnabled OBJECT-TYPE
    SYNTAX PsaMicrocodeFeatures
--    Rsyntax OCTET STRING(SIZE(1..4))
--         BITS are:
--           basicIpForwarding(0)
--           basicMplsSwitching(1)
--           frameRelaySwitching(2)
--           eAFrSwitching(3)
--           frtp(4)
--           pirc(5)
--           vrfSelection(6)
--           uRPF(7)
--           inputAcl128(8)
--           outputAcl128(9)
--           inputAcl448(10)
--           outputAcl448(11)
--           sampledNetflow(12)
--           ipMarking(13)
--           bgppa(14)
--           uti(15)
--           mplsVpn(16)
--           eoMpls(17)
--           atmoMpls(18)
--           csc(19)
--           multicast(20)
--           perPacketLoadBalancing(21)
--           sourceMacAccounting(22)
--           frSubVrf(23)
--           serverCard(24)
--           mplsSNF(25)
--           linkBundle(26)
--           atomDisposition(27)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The list of features newly enabled due to the 
        loading of the microcode bundle identified by
        cpmcModulePsaCurrBundleId. "
    ::= { cpmcModulePsaEntry 3 }

cpmcModulePsaFeaturesDisabled OBJECT-TYPE
    SYNTAX PsaMicrocodeFeatures
--    Rsyntax OCTET STRING(SIZE(1..4))
--         BITS are:
--           basicIpForwarding(0)
--           basicMplsSwitching(1)
--           frameRelaySwitching(2)
--           eAFrSwitching(3)
--           frtp(4)
--           pirc(5)
--           vrfSelection(6)
--           uRPF(7)
--           inputAcl128(8)
--           outputAcl128(9)
--           inputAcl448(10)
--           outputAcl448(11)
--           sampledNetflow(12)
--           ipMarking(13)
--           bgppa(14)
--           uti(15)
--           mplsVpn(16)
--           eoMpls(17)
--           atmoMpls(18)
--           csc(19)
--           multicast(20)
--           perPacketLoadBalancing(21)
--           sourceMacAccounting(22)
--           frSubVrf(23)
--           serverCard(24)
--           mplsSNF(25)
--           linkBundle(26)
--           atomDisposition(27)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The list of features disabled because of the
        unloading of microcode bundle identified by
        cpmcModulePsaPrevBundleId and loading of the
        microcode bundle identified by
        cpmcModulePsaCurrBundleId."
    ::= { cpmcModulePsaEntry 4 }

cpmcBundleTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CpmcBundleEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A table of PSA microcode bundle features."
    ::= { cpmcBundle 1 }

cpmcBundleEntry OBJECT-TYPE
    SYNTAX CpmcBundleEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Details the features of a microcode bundle."
    INDEX { cpmcBundleId }
    ::= { cpmcBundleTable 1 }

CpmcBundleEntry ::= SEQUENCE {
    cpmcBundleId PsaMicrocodeBundleId,
    cpmcBundleFeatures PsaMicrocodeFeatures
    }

cpmcBundleId OBJECT-TYPE
    SYNTAX PsaMicrocodeBundleId
--    Rsyntax INTEGER {
--        unknown(1),
--        none(2),
--        vanillaPOS(3),
--        vanillaGE(4),
--        vanillaInuit(5),
--        vanillaTaz(6),
--        pircPOS(7),
--        pircGE(8),
--        uRPFPOS(9),
--        vrfSelectionPOS(10),
--        bgppaPOS(11),
--        bgppaGE(12),
--        ipColorPOS(13),
--        inputAcl128POS(14),
--        inputAcl128GE(15),
--        outputAcl128POS(16),
--        outputAcl128GE(17),
--        inputAcl448POS(18),
--        inputAcl448GE(19),
--        outputAcl448POS(20),
--        outputAcl448GE(21),
--        serverCard(22),
--        eoMplsGE(23),
--        frtpPOS(24),
--        outputAclATM(25),
--        inputAcl128Taz(26),
--        vrfSelectionGE(27),
--        uRPFGE(28),
--        cscGE(29),
--        linkBundleSMPOS(30),
--        linkBundleDMPOS(31),
--        linkBundleSMGE(32),
--        linkBundleDMGE(33)
--        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The identity of the PSA microcode bundle. This
        object value can't be unknown(1) or none(2)."
    ::= { cpmcBundleEntry 1 }

cpmcBundleFeatures OBJECT-TYPE
    SYNTAX PsaMicrocodeFeatures
--    Rsyntax OCTET STRING(SIZE(1..4))
--         BITS are:
--           basicIpForwarding(0)
--           basicMplsSwitching(1)
--           frameRelaySwitching(2)
--           eAFrSwitching(3)
--           frtp(4)
--           pirc(5)
--           vrfSelection(6)
--           uRPF(7)
--           inputAcl128(8)
--           outputAcl128(9)
--           inputAcl448(10)
--           outputAcl448(11)
--           sampledNetflow(12)
--           ipMarking(13)
--           bgppa(14)
--           uti(15)
--           mplsVpn(16)
--           eoMpls(17)
--           atmoMpls(18)
--           csc(19)
--           multicast(20)
--           perPacketLoadBalancing(21)
--           sourceMacAccounting(22)
--           frSubVrf(23)
--           serverCard(24)
--           mplsSNF(25)
--           linkBundle(26)
--           atomDisposition(27)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The list of features supported by microcode bundle
        identified by cpmcBundleId."
    ::= { cpmcBundleEntry 2 }

cpmcNotifEnables OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This variable indicates whether the system
         produces the ciscoPsaMicrocodeReload notification.
         A false value will prevent PSA microcode reload
         notifications from being generated by the system."
    DEFVAL { false }
    ::= { cpmcNotif 1 }

ciscoPsaMicrocodeReload TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE ciscoPsaMicrocodeMIB
    VARIABLES {
        entPhysicalName, entPhysicalDescr, 
        cpmcModulePsaCurrBundleId, cpmcModulePsaPrevBundleId, 
        cpmcModulePsaFeaturesEnabled, cpmcModulePsaFeaturesDisabled }
--  Status
--    mandatory
    DESCRIPTION
        "A ciscoPsaMicrocodeReload notification is generated 
        when a PSA microcode reload occurs.."
    ::= 1

ciscoPsaMicrocodeParamsGroup OBJECT IDENTIFIER ::= { ciscoPsaMicrocodeMIBGroups 1 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects providing PSA microcode 
--    monitoring.
--  objects
--    cpmcModulePsaCurrBundleId, cpmcModulePsaPrevBundleId, 
--    cpmcModulePsaFeaturesEnabled, cpmcModulePsaFeaturesDisabled, 
--    cpmcBundleFeatures, cpmcNotifEnables

ciscoPsaMicrocodeNotifGroup OBJECT IDENTIFIER ::= { ciscoPsaMicrocodeMIBGroups 2 }
-- NOTIFICATION-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of notifications generated by 
--     the devices supporting this MIB.
--  notifications
--    ciscoPsaMicrocodeReload

ciscoPsaMicrocodeMIBCompliance OBJECT IDENTIFIER ::= { ciscoPsaMicrocodeMIBCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    The compliance statement for entities which implement
--     the CISCO-PSA-MICROCODE-MIB.
--  Module
--    >>current<<
--   MandGroup
--    ciscoPsaMicrocodeParamsGroup
--   MandGroup
--    ciscoPsaMicrocodeNotifGroup


END