-- MIB created 6/25/99 12:57:30, by
--   SMIC (the next generation) version 1.6.29, November 22, 1994.

CISCO-QLLC01-MIB DEFINITIONS ::= BEGIN

-- From file: "CISCO-QLLC01-MIB.my"

IMPORTS
    Counter32, Integer32
            FROM SNMPv2-SMI-v1
    OBJECT-TYPE
            FROM RFC-1212
    ciscoExperiment
            FROM CISCO-SMI;

snaqllc01 OBJECT IDENTIFIER ::= { ciscoExperiment 6 }
-- MODULE-IDENTITY
--  LastUpdated
--    9411090000Z
--  OrgName
--    Cisco Systems, Inc.
--  ContactInfo
--     Cisco Systems
--    Customer Service
--    
--    Postal: 170 W. Tasman Drive
--    San Jose, CA  95134
--    USA
--    
--     Tel: +1 800 553-NETS
--    
--    E-mail: cs-snmp@cisco.com
--  Descr
--    This is the MIB module for objects used to 
--     manage the QLLC protocol.

qllc            OBJECT IDENTIFIER ::= { snaqllc01 1 }
qllcMibConformance OBJECT IDENTIFIER ::= { snaqllc01 2 }
qllcMibCompliances OBJECT IDENTIFIER ::= { qllcMibConformance 1 }
qllcMibGroups   OBJECT IDENTIFIER ::= { qllcMibConformance 2 }

IfIndexType ::= INTEGER(0..2147483647)

X121Address ::= OCTET STRING(SIZE(0..17))

qllcLSAdminTable OBJECT-TYPE
    SYNTAX SEQUENCE OF QllcLSAdminEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table contains objects that can be changed
         for each qllc entry. Changing one of these parameters
         will take effect in the operating LS immediately.
                       Each qllc connection will have an entry in this table."
    ::= { qllc 1 }

qllcLSAdminEntry OBJECT-TYPE
    SYNTAX QllcLSAdminEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Configured parameter values for a specific qllc."
    INDEX { qllcLSAdminIfIndex, qllcLSAdminLciVcIndex }
    ::= { qllcLSAdminTable 1 }

QllcLSAdminEntry ::= SEQUENCE {
    qllcLSAdminIfIndex IfIndexType,
    qllcLSAdminLciVcIndex IfIndexType,
    qllcLSAdminCircuitType INTEGER,
    qllcLSAdminRole INTEGER,
    qllcLSAdminX25Add X121Address,
    qllcLSAdminModulo INTEGER,
    qllcLSAdminLgX25 Integer32
    }

qllcLSAdminIfIndex OBJECT-TYPE
    SYNTAX IfIndexType
--    Rsyntax INTEGER(0..2147483647)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Interface Index value for the qllc connection. "
    ::= { qllcLSAdminEntry 1 }

qllcLSAdminLciVcIndex OBJECT-TYPE
    SYNTAX IfIndexType
--    Rsyntax INTEGER(0..2147483647)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The virtual circuit number for the logical
         channel identifier or PVC number depending on the 
         type of circuit on this interface. "
    ::= { qllcLSAdminEntry 2 }

qllcLSAdminCircuitType OBJECT-TYPE
    SYNTAX INTEGER {
        switchedVC(1),
        permanentVC(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The circuit type on this interface."
    ::= { qllcLSAdminEntry 3 }

qllcLSAdminRole OBJECT-TYPE
    SYNTAX INTEGER {
        primary(1),
        secondary(2),
        peerToPeer(3)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The role that the QLLC link station shall assume."
    ::= { qllcLSAdminEntry 4 }

qllcLSAdminX25Add OBJECT-TYPE
    SYNTAX X121Address
--    Rsyntax OCTET STRING(SIZE(0..17))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The X.25 address associated with the qllc 
                       connection. "
    ::= { qllcLSAdminEntry 5 }

qllcLSAdminModulo OBJECT-TYPE
    SYNTAX INTEGER {
        modulo8(1),
        modulo128(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The modulus for QLLC link station. 
                       It determines the size of the rotating
         ACK window and can take values of 8 and 128. "
    DEFVAL { modulo8 }
    ::= { qllcLSAdminEntry 6 }

qllcLSAdminLgX25 OBJECT-TYPE
    SYNTAX Integer32
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The largest QLLC packet allowed to go out 
                       on the QLLC/X.25 side. "
    ::= { qllcLSAdminEntry 7 }

qllcLSOperTable OBJECT-TYPE
    SYNTAX SEQUENCE OF QllcLSOperEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table contains an entry for each qllc 
                       connection."
    ::= { qllc 2 }

qllcLSOperEntry OBJECT-TYPE
    SYNTAX QllcLSOperEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Parameter values for a specific qllc connection."
    INDEX { qllcLSOperIfIndex, qllcLSOperLciVcIndex }
    ::= { qllcLSOperTable 1 }

QllcLSOperEntry ::= SEQUENCE {
    qllcLSOperIfIndex IfIndexType,
    qllcLSOperLciVcIndex IfIndexType,
    qllcLSOperCircuitType INTEGER,
    qllcLSOperRole INTEGER,
    qllcLSOperX25Add X121Address,
    qllcLSOperModulo INTEGER,
    qllcLSOperState INTEGER,
    qllcLSOperLgX25 Integer32
    }

qllcLSOperIfIndex OBJECT-TYPE
    SYNTAX IfIndexType
--    Rsyntax INTEGER(0..2147483647)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Interface Index value for the qllc connection."
    ::= { qllcLSOperEntry 1 }

qllcLSOperLciVcIndex OBJECT-TYPE
    SYNTAX IfIndexType
--    Rsyntax INTEGER(0..2147483647)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The virtual circuit number for the logical
         channel identifier on this interface. "
    ::= { qllcLSOperEntry 2 }

qllcLSOperCircuitType OBJECT-TYPE
    SYNTAX INTEGER {
        switchedVC(1),
        permanentVC(2)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The circuit type on this interface."
    ::= { qllcLSOperEntry 3 }

qllcLSOperRole OBJECT-TYPE
    SYNTAX INTEGER {
        primary(1),
        secondary(2),
        peerToPeer(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The role the QLLC link station."
    ::= { qllcLSOperEntry 4 }

qllcLSOperX25Add OBJECT-TYPE
    SYNTAX X121Address
--    Rsyntax OCTET STRING(SIZE(0..17))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The remote X.25 address associated with the 
                       qllc connection. "
    ::= { qllcLSOperEntry 5 }

qllcLSOperModulo OBJECT-TYPE
    SYNTAX INTEGER {
        modulo8(1),
        modulo128(2)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The modulus for QLLC link station. It determines 
                       the size of the rotating ACK window and can take 
                       values of 8 and 128. "
    DEFVAL { modulo8 }
    ::= { qllcLSOperEntry 6 }

qllcLSOperState OBJECT-TYPE
    SYNTAX INTEGER {
        lsStateInop(1),
        lsStateClosed(2),
        lsStateOpening(3),
        lsStateClosing(4),
        lsStateRecovery(5),
        lsStateOpened(6)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The state of a particular QLLC connection. 
                       Inop, closed, opening, closing,
         recovery and opened are states defined in the IBM
         document SC30-3409-1 The X.25 1984/1988 DTE/DCE 
         and DTE/DTE Interface Architecture Reference."
    ::= { qllcLSOperEntry 7 }

qllcLSOperLgX25 OBJECT-TYPE
    SYNTAX Integer32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The largest QLLC packet allowed to go out on 
                       the QLLC/X.25 side. "
    ::= { qllcLSOperEntry 8 }

qllcLSStatsTable OBJECT-TYPE
    SYNTAX SEQUENCE OF QllcLSStatsEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table defines link station statistics kept
        for each qllc connection."
    ::= { qllc 3 }

qllcLSStatsEntry OBJECT-TYPE
    SYNTAX QllcLSStatsEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Link station statistics."
    INDEX { qllcLSStatsIfIndex, qllcLSStatsLciVcIndex }
    ::= { qllcLSStatsTable 1 }

QllcLSStatsEntry ::= SEQUENCE {
    qllcLSStatsIfIndex IfIndexType,
    qllcLSStatsLciVcIndex IfIndexType,
    qllcLSStatsXidIn Counter32,
    qllcLSStatsXidOut Counter32,
    qllcLSStatsTestIn Counter32,
    qllcLSStatsTestOut Counter32,
    qllcLSStatsQuenchOff Counter32,
    qllcLSStatsQuenchOn Counter32,
    qllcLSStatsInPaks Counter32,
    qllcLSStatsOutPaks Counter32,
    qllcLSStatsInBytes Counter32,
    qllcLSStatsOutBytes Counter32,
    qllcLSStatsNumRcvQsms Counter32,
    qllcLSStatsNumSndQsms Counter32,
    qllcLSStatsNumRcvDiscs Counter32,
    qllcLSStatsNumSndDiscs Counter32,
    qllcLSStatsNumRcvDms Counter32,
    qllcLSStatsNumSndDms Counter32,
    qllcLSStatsNumRcvFrmrs Counter32,
    qllcLSStatsNumSndFrmrs Counter32,
    qllcLSStatsNumDrops Counter32,
    qllcLSStatsNumErrs Counter32
    }

qllcLSStatsIfIndex OBJECT-TYPE
    SYNTAX IfIndexType
--    Rsyntax INTEGER(0..2147483647)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Interface Index value for the qllc connection.  "
    ::= { qllcLSStatsEntry 1 }

qllcLSStatsLciVcIndex OBJECT-TYPE
    SYNTAX IfIndexType
--    Rsyntax INTEGER(0..2147483647)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The virtual circuit number for the logical
         channel identifier on this interface. "
    ::= { qllcLSStatsEntry 2 }

qllcLSStatsXidIn OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of XIDs received from the LS on 
                       this VC."
    ::= { qllcLSStatsEntry 3 }

qllcLSStatsXidOut OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of XIDs sent to the LS on this VC."
    ::= { qllcLSStatsEntry 4 }

qllcLSStatsTestIn OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of TEST packets received from the LS
                       on this VC."
    ::= { qllcLSStatsEntry 5 }

qllcLSStatsTestOut OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of TEST packets sent to the LS from
                       this VC."
    ::= { qllcLSStatsEntry 6 }

qllcLSStatsQuenchOff OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of times the connection Quenched off
                       for this connection. "
    ::= { qllcLSStatsEntry 7 }

qllcLSStatsQuenchOn OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of times the connection Quenched on for
                       this connection. "
    ::= { qllcLSStatsEntry 8 }

qllcLSStatsInPaks OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of information packets received on
                       this interfaces. "
    ::= { qllcLSStatsEntry 9 }

qllcLSStatsOutPaks OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of information packets sent
                       on this interfaces. "
    ::= { qllcLSStatsEntry 10 }

qllcLSStatsInBytes OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of bytes in the information
                       packets received on this connection. "
    ::= { qllcLSStatsEntry 11 }

qllcLSStatsOutBytes OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of bytes in the information
                       packets sent on this connection. "
    ::= { qllcLSStatsEntry 12 }

qllcLSStatsNumRcvQsms OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of QSMs received on this connection. "
    ::= { qllcLSStatsEntry 13 }

qllcLSStatsNumSndQsms OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of QSMs sent on this connection. "
    ::= { qllcLSStatsEntry 14 }

qllcLSStatsNumRcvDiscs OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of DISCs received on this connection. "
    ::= { qllcLSStatsEntry 15 }

qllcLSStatsNumSndDiscs OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of DISCs sent on this connection. "
    ::= { qllcLSStatsEntry 16 }

qllcLSStatsNumRcvDms OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of DMs received on this connection. "
    ::= { qllcLSStatsEntry 17 }

qllcLSStatsNumSndDms OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of DMs sent on this connection. "
    ::= { qllcLSStatsEntry 18 }

qllcLSStatsNumRcvFrmrs OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of FRMRs received on this connection. "
    ::= { qllcLSStatsEntry 19 }

qllcLSStatsNumSndFrmrs OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of FRMRs sent on this connection. "
    ::= { qllcLSStatsEntry 20 }

qllcLSStatsNumDrops OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of packets dropped due to buffer
                       allocation or other internal problems."
    ::= { qllcLSStatsEntry 21 }

qllcLSStatsNumErrs OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of HDLC protocol errors detected."
    ::= { qllcLSStatsEntry 22 }

qllcLSAdminGroup OBJECT IDENTIFIER ::= { qllcMibGroups 1 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects providing configuration capability.
--  objects
--    qllcLSAdminIfIndex, qllcLSAdminLciVcIndex, qllcLSAdminRole, 
--    qllcLSAdminCircuitType, qllcLSAdminX25Add, qllcLSAdminModulo, 
--    qllcLSAdminLgX25

qllcLSOperGroup OBJECT IDENTIFIER ::= { qllcMibGroups 2 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects providing operational control
--     capability.
--  objects
--    qllcLSOperIfIndex, qllcLSOperLciVcIndex, 
--    qllcLSOperCircuitType, qllcLSOperRole, qllcLSOperX25Add, 
--    qllcLSOperModulo, qllcLSOperState, qllcLSOperLgX25

qllcLSStatsGroup OBJECT IDENTIFIER ::= { qllcMibGroups 3 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects providing statistics.
--  objects
--    qllcLSStatsIfIndex, qllcLSStatsLciVcIndex, qllcLSStatsXidIn, 
--    qllcLSStatsXidOut, qllcLSStatsTestIn, qllcLSStatsTestOut, 
--    qllcLSStatsQuenchOff, qllcLSStatsQuenchOn, qllcLSStatsInPaks, 
--    qllcLSStatsOutPaks, qllcLSStatsInBytes, qllcLSStatsOutBytes, 
--    qllcLSStatsNumRcvQsms, qllcLSStatsNumSndQsms, 
--    qllcLSStatsNumRcvDiscs, qllcLSStatsNumSndDiscs, 
--    qllcLSStatsNumRcvDms, qllcLSStatsNumSndDms, 
--    qllcLSStatsNumRcvFrmrs, qllcLSStatsNumSndFrmrs, 
--    qllcLSStatsNumDrops, qllcLSStatsNumErrs

qllcMibCompliance OBJECT IDENTIFIER ::= { qllcMibCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    The compliance statement for QLLC nodes.
--  Module
--    >>current<<
--   MandGroup
--    qllcLSAdminGroup
--   MandGroup
--    qllcLSOperGroup
--   MandGroup
--    qllcLSStatsGroup
--   ObjVar
--    qllcLSAdminIfIndex
--   ObjVar
--    qllcLSAdminLciVcIndex
--   ObjVar
--    qllcLSAdminRole
--   ObjVar
--    qllcLSAdminCircuitType
--   ObjVar
--    qllcLSAdminX25Add
--   ObjVar
--    qllcLSAdminModulo
--   ObjVar
--    qllcLSAdminLgX25


END