-- MIB file created 07-Aug-2002 14:29:18, by -- SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com CISCO-RHINO-MIB DEFINITIONS ::= BEGIN -- From file: "CISCO-RHINO-MIB.my" -- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T" IMPORTS TimeStamp, DisplayString, TruthValue FROM SNMPv2-TC-v1 InterfaceIndex FROM IF-MIB ifIndex FROM RFC1213-MIB workgroup FROM CISCO-SMI -- Unsigned32 -- FROM CISCO-TC Counter, Gauge FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215; ciscoLS1010ChassisMIB OBJECT IDENTIFIER ::= { workgroup 11 } -- MODULE-IDENTITY -- LastUpdated -- 200103290000Z -- OrgName -- Cisco Systems, Inc. -- ContactInfo -- Cisco Systems -- Customer Service -- -- Postal: 170 W Tasman Drive -- San Jose, CA 95134 -- USA -- -- Tel: +1 800 553-NETS -- -- E-mail: cs-atm@cisco.com -- Descr -- -Added enum sixPortDS3 for ciscoLS1010SubModuleType. -- -Added enum nodeSwitchProcessor2ndGeneration for -- ciscoLS1010ModuleType. -- -Added enum ac175W for psType. -- -Added Group object for Notification objects. -- RevDate -- 200103290000Z -- RevDescr -- -Added enum ACL Daughter card SubModuleType for -- Cat8540. -- -Added enum for TS Carrier Module. -- -Added enum for medium SingleModeLRFiber for -- OC3 and OC12 ATM pams. -- RevDate -- 200102150000Z -- RevDescr -- -Added object for module hardware minor version. -- -Added objects for module and submodule serial -- number in string format. -- -Deprecated integer serial number objects for module -- and submodule. -- -Added enumeration to submodule type for -- NRP2 for 6400. -- -Reduce to single Module Compliance for clarity. -- RevDate -- 200007200000Z -- RevDescr -- Added enums XPIF GE, ATM, and POS SubModuleTypes for -- Cat8540c. Added enums cmpmCarrier ModuleType for -- Cat8540c. -- RevDate -- 200004110000Z -- RevDescr -- Added enums in ChassisSysType & ChassisBkplType for -- Cat4908g -- RevDate -- 200002070000Z -- RevDescr -- Added enums for OC48c LR, and Dual Slot modules. -- RevDate -- 9911300000Z -- RevDescr -- Added enums for OC48c and ARM modules. -- RevDate -- 9910040000Z -- RevDescr -- Added enums in ChassisSysType & ChassisBkplType for -- C2948. -- RevDate -- 9906290000Z -- RevDescr -- Added enums in subModuleType for the IMA & ATM25M4P -- PAMs. -- RevDate -- 9906170000Z -- RevDescr -- Added enumerations for Cat6k -- RevDate -- 9903120000Z -- RevDescr -- Added enumerations for TGX8750. -- RevDate -- 9812020000Z -- RevDescr -- Consolidate changes from C6400, C8500, FR-PAM, -- new modules. -- RevDate -- 9810260000Z -- RevDescr -- Added new enum c8510. Also new tables for enet -- ports and LEDs. -- RevDate -- 9807130000Z -- RevDescr -- Rhino ATM Switch Chassis MIB -- RevDate -- 9711200000Z -- RevDescr -- Added ciscoAtmInterceptEndToEndOamFlow. Editorial changes. -- RevDate -- 9707220000Z -- RevDescr -- Added clocking objects -- RevDate -- 9702040000Z -- RevDescr -- Added object ciscoLS1010SubModuleHwVersionMinor. -- RevDate -- 9610020000Z -- RevDescr -- Added a new PsType for -48 VDC. -- RevDate -- 9510020000Z -- RevDescr -- Initial version of this MIB module. ciscoLS1010ChassisMIBObjects OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIB 1 } ciscoLS1010ChassisGroup OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBObjects 1 } ciscoLS1010ModuleGroup OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBObjects 2 } ciscoLS1010SubModuleGroup OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBObjects 3 } ciscoLS1010PortGroup OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBObjects 4 } ciscoLS1010CpuSwitchGroup OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBObjects 5 } clsEnetPortGroup OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBObjects 6 } clsPortLedGroup OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBObjects 7 } ciscoLS1010ChassisMIBNotificationPrefix OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIB 2 } ciscoLS1010ChassisMIBNotifications OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBNotificationPrefix 0 } ciscoLS1010ChassisMIBConformance OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIB 3 } ciscoLS1010ChassisMIBCompliances OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBConformance 1 } ciscoLS1010ChassisMIBGroups OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBConformance 2 } PsType ::= INTEGER { --?? enum value of zero may cause problems powerone(0), astec(1), minus48VDC(2), empty(3), ac1100W(4), ac1200W(5), dc1200W(6), pem(7), ac1360W(8), dc1360W(9), ac2000W(10), dc2000W(11), acpem(12), ac175W(13) } -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- Power Supply type OperStatus ::= INTEGER { unknown(1), ok(2), fault(3), fanAlarm(4), partialFault(5), empty(6) } -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- Operational status of a chassis component. -- -- fanAlarm(4) is only applicable to the C5500 power supply. -- A fault(3) supercedes a fanAlarm(4). -- -- partialFault(5) & empty(6) are used by the Cisco6400 for the -- fan status to indicate partial fans failure & fan not present. -- A fault(3) value indicates total fans failure in the C6400. AdminStatus ::= INTEGER { enable(1), disable(2), reset(3) } -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- Admin status of a chassis component. Led ::= INTEGER { off(1), green(2), red(3), yellow(4), blinkgreen(5), blinkyellow(6), blinkred(7), unknown(8) } -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- LED status PcmciaType ::= INTEGER { unknown(1), empty(2), flash(3), disk(4) } -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- PCMCIA card type ciscoLS1010ChassisSysType OBJECT-TYPE SYNTAX INTEGER { other(1), ls1010(2), c8510(3), cisco6400(4), c8540(5), tgx8750(6), wsx6302(7), c2948g(8), c4908g(9) } ACCESS read-only STATUS mandatory DESCRIPTION "The chassis system type." ::= { ciscoLS1010ChassisGroup 1 } ciscoLS1010ChassisBkplType OBJECT-TYPE SYNTAX INTEGER { other(1), atm(2), c5500(3), cisco6400(4), c8510(5), c8540(6), tgx8750(7), cat6000(8), c2948g(9), c4908g(10) } ACCESS read-only STATUS mandatory DESCRIPTION "The chassis backplane type." ::= { ciscoLS1010ChassisGroup 2 } ciscoLS1010ChassisPs0Type OBJECT-TYPE SYNTAX PsType -- Rsyntax INTEGER { -- ?? enum value of zero may cause problems -- powerone(0), -- astec(1), -- minus48VDC(2), -- empty(3), -- ac1100W(4), -- ac1200W(5), -- dc1200W(6), -- pem(7), -- ac1360W(8), -- dc1360W(9), -- ac2000W(10), -- dc2000W(11), -- acpem(12), -- ac175W(13) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Type of power supply number 1." ::= { ciscoLS1010ChassisGroup 3 } ciscoLS1010ChassisPs0AdminStatus OBJECT-TYPE SYNTAX AdminStatus -- Rsyntax INTEGER { -- enable(1), -- disable(2), -- reset(3) -- } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable power supply 1." ::= { ciscoLS1010ChassisGroup 4 } ciscoLS1010ChassisPs0Status OBJECT-TYPE SYNTAX OperStatus -- Rsyntax INTEGER { -- unknown(1), -- ok(2), -- fault(3), -- fanAlarm(4), -- partialFault(5), -- empty(6) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Status of power supply number 1." ::= { ciscoLS1010ChassisGroup 5 } ciscoLS1010ChassisPs0Led OBJECT-TYPE SYNTAX Led -- Rsyntax INTEGER { -- off(1), -- green(2), -- red(3), -- yellow(4), -- blinkgreen(5), -- blinkyellow(6), -- blinkred(7), -- unknown(8) -- } ACCESS read-only STATUS mandatory DESCRIPTION "LED Status of power supply number 1." ::= { ciscoLS1010ChassisGroup 6 } ciscoLS1010ChassisPs1Type OBJECT-TYPE SYNTAX PsType -- Rsyntax INTEGER { -- ?? enum value of zero may cause problems -- powerone(0), -- astec(1), -- minus48VDC(2), -- empty(3), -- ac1100W(4), -- ac1200W(5), -- dc1200W(6), -- pem(7), -- ac1360W(8), -- dc1360W(9), -- ac2000W(10), -- dc2000W(11), -- acpem(12), -- ac175W(13) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Type of power supply number 2." ::= { ciscoLS1010ChassisGroup 7 } ciscoLS1010ChassisPs1AdminStatus OBJECT-TYPE SYNTAX AdminStatus -- Rsyntax INTEGER { -- enable(1), -- disable(2), -- reset(3) -- } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable power supply 2." ::= { ciscoLS1010ChassisGroup 8 } ciscoLS1010ChassisPs1Status OBJECT-TYPE SYNTAX OperStatus -- Rsyntax INTEGER { -- unknown(1), -- ok(2), -- fault(3), -- fanAlarm(4), -- partialFault(5), -- empty(6) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Status of power supply number 2." ::= { ciscoLS1010ChassisGroup 9 } ciscoLS1010ChassisPs1Led OBJECT-TYPE SYNTAX Led -- Rsyntax INTEGER { -- off(1), -- green(2), -- red(3), -- yellow(4), -- blinkgreen(5), -- blinkyellow(6), -- blinkred(7), -- unknown(8) -- } ACCESS read-only STATUS mandatory DESCRIPTION "LED Status of power supply number 2." ::= { ciscoLS1010ChassisGroup 10 } ciscoLS1010ChassisFanStatus OBJECT-TYPE SYNTAX OperStatus -- Rsyntax INTEGER { -- unknown(1), -- ok(2), -- fault(3), -- fanAlarm(4), -- partialFault(5), -- empty(6) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Status of the chassis fan." ::= { ciscoLS1010ChassisGroup 11 } ciscoLS1010ChassisFanLed OBJECT-TYPE SYNTAX Led -- Rsyntax INTEGER { -- off(1), -- green(2), -- red(3), -- yellow(4), -- blinkgreen(5), -- blinkyellow(6), -- blinkred(7), -- unknown(8) -- } ACCESS read-only STATUS mandatory DESCRIPTION "LED Status of fan." ::= { ciscoLS1010ChassisGroup 12 } ciscoLS1010ChassisCardStatusLed OBJECT-TYPE SYNTAX Led -- Rsyntax INTEGER { -- off(1), -- green(2), -- red(3), -- yellow(4), -- blinkgreen(5), -- blinkyellow(6), -- blinkred(7), -- unknown(8) -- } ACCESS read-only STATUS mandatory DESCRIPTION "LED Status of CPU card." ::= { ciscoLS1010ChassisGroup 13 } ciscoLS1010ChassisEnetLinkLed OBJECT-TYPE SYNTAX Led -- Rsyntax INTEGER { -- off(1), -- green(2), -- red(3), -- yellow(4), -- blinkgreen(5), -- blinkyellow(6), -- blinkred(7), -- unknown(8) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Ethernet link status LED of CPU card." ::= { ciscoLS1010ChassisGroup 14 } ciscoLS1010Chassis12VoltStatus OBJECT-TYPE SYNTAX INTEGER { ok(1), outOfTolerance(2), unknown(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The chassis 12V status." ::= { ciscoLS1010ChassisGroup 15 } ciscoLS1010ChassisTempStatus OBJECT-TYPE SYNTAX INTEGER { ok(1), overTemperature(2), minorWarning(3), majorWarning(4), criticalWarning(5) } ACCESS read-only STATUS mandatory DESCRIPTION "The chassis temperature status. The values of minorWarning(3), majorWarning(4) and criticalWarning(5) will be primarily used by C6400 to indicate the core temperature. C6400 will never report overTemperature(2) status. In C6400 there are two temperature sensors: core and inlet. C6400 use this object to represent the core temperature and the other object ciscoLS1010ChassisInletTempStatus to represent the inlet temperature." ::= { ciscoLS1010ChassisGroup 16 } ciscoLS1010ChassisPcmciaSlot0Type OBJECT-TYPE SYNTAX PcmciaType -- Rsyntax INTEGER { -- unknown(1), -- empty(2), -- flash(3), -- disk(4) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Type of PCMCIA slot 0 type." ::= { ciscoLS1010ChassisGroup 17 } ciscoLS1010ChassisPcmciaSlot1Type OBJECT-TYPE SYNTAX PcmciaType -- Rsyntax INTEGER { -- unknown(1), -- empty(2), -- flash(3), -- disk(4) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Type of PCMCIA slot 1 type." ::= { ciscoLS1010ChassisGroup 18 } ciscoLS1010ChassisNumSlots OBJECT-TYPE SYNTAX INTEGER(1..16) ACCESS read-only STATUS mandatory DESCRIPTION "The number of slots in the chassis for plug-in modules." ::= { ciscoLS1010ChassisGroup 19 } ciscoLS1010ChassisLastChange OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The last time chassis physical content get changed." ::= { ciscoLS1010ChassisGroup 20 } ciscoLS1010ChassisFailureAction OBJECT-TYPE SYNTAX INTEGER { nothing(1), sendTrap(2), shutdown(3), sendTrapAndShutdown(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The action to take when there is any chassis failure, which includes either power supply, voltage, temperature and fan failure." DEFVAL { sendTrapAndShutdown } ::= { ciscoLS1010ChassisGroup 21 } ciscoLS1010ChassisChangeAction OBJECT-TYPE SYNTAX INTEGER { nothing(1), sendTrap(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The action to take when there is any chassis change, which includes either power supply, fan and boards." DEFVAL { sendTrap } ::= { ciscoLS1010ChassisGroup 22 } ciscoLS1010ChassisClockingMode OBJECT-TYPE SYNTAX INTEGER { revertive(1), nonRevertive(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The clocking mode of the ls1010 system. By default, the mode is non-revertive, which means that the clock will stick to the current priority, even though higher priority clock is available." ::= { ciscoLS1010ChassisGroup 23 } ciscols1010SystemClockSourceStatus OBJECT-TYPE SYNTAX INTEGER { notSelected(1), selected(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The network clock source status of 'system' source: 'notSelected' indicates 'system' not selected as the network clock source. 'selected' indicates ASP freerunning(system) is selected as network clock source. " ::= { ciscoLS1010ChassisGroup 24 } ciscols1010SystemClockSourcePriority OBJECT-TYPE SYNTAX INTEGER { priority1(1), priority2(2), priority3(3), priority4(4), priority5(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The highest priority at which 'system' is configured as a network clock source. " ::= { ciscoLS1010ChassisGroup 25 } ciscoLS1010ChassisInletTempStatus OBJECT-TYPE SYNTAX INTEGER { ok(1), overTemperature(2), minorWarning(3), majorWarning(4), criticalWarning(5), unknown(6) } ACCESS read-only STATUS mandatory DESCRIPTION "C6400 has two temperature sensors: core and inlet. C6400 use this object to represent the inlet temperature and use the object ciscoLS1010ChassisTempStatus to represent the core temperature." ::= { ciscoLS1010ChassisGroup 26 } ciscoLS1010ModuleTable OBJECT-TYPE SYNTAX SEQUENCE OF CiscoLS1010ModuleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of module entries. The number of entries is given by the value of ciscoLS1010ChassisNumSlots." ::= { ciscoLS1010ModuleGroup 1 } ciscoLS1010ModuleEntry OBJECT-TYPE SYNTAX CiscoLS1010ModuleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing information about one module in a slot of the chassis." INDEX { ciscoLS1010ModuleIndex } ::= { ciscoLS1010ModuleTable 1 } CiscoLS1010ModuleEntry ::= SEQUENCE { ciscoLS1010ModuleIndex INTEGER, ciscoLS1010ModuleType INTEGER, ciscoLS1010ModuleSerialNumber INTEGER, ciscoLS1010ModuleHwVersion INTEGER, ciscoLS1010ModuleSwVersion INTEGER, ciscoLS1010ModuleDescr DisplayString, ciscoLS1010ModuleNumSubModules INTEGER, ciscoLS1010ModuleAdminStatus AdminStatus, ciscoLS1010ModuleOperStatus OperStatus, ciscoLS1010ModuleHwVersionMinor Gauge, ciscoLS1010ModuleSerialNumberString DisplayString } ciscoLS1010ModuleIndex OBJECT-TYPE SYNTAX INTEGER(0..15) ACCESS not-accessible STATUS mandatory DESCRIPTION "A unique value for each module." ::= { ciscoLS1010ModuleEntry 1 } ciscoLS1010ModuleType OBJECT-TYPE SYNTAX INTEGER { other(1), carrier(2), cpuSwitchAndFeature(3), cpuSwitchAndFeaturePFQ(4), superCarrier(5), cpuRoute(6), switch10GAndFC(7), switch10GNoFC(8), atmFabricIntegration(9), dualSlot(10), cmpmCarrier(11), tsCarrier(12), nodeSwitchProcessor2ndGeneration(13) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of module." ::= { ciscoLS1010ModuleEntry 2 } ciscoLS1010ModuleSerialNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The serial number of the module. Deprecated in favor of object ciscoLS1010ModuleSerialNumberString. This object returns 0 for modules using an alphanumeric numbering scheme." ::= { ciscoLS1010ModuleEntry 3 } ciscoLS1010ModuleHwVersion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The hardware version of the module." ::= { ciscoLS1010ModuleEntry 4 } ciscoLS1010ModuleSwVersion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The software version number." ::= { ciscoLS1010ModuleEntry 5 } ciscoLS1010ModuleDescr OBJECT-TYPE SYNTAX DisplayString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "A descriptive string used by the agent to describe the module." ::= { ciscoLS1010ModuleEntry 6 } ciscoLS1010ModuleNumSubModules OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The max number of sub-modules supported by this module." ::= { ciscoLS1010ModuleEntry 7 } ciscoLS1010ModuleAdminStatus OBJECT-TYPE SYNTAX AdminStatus -- Rsyntax INTEGER { -- enable(1), -- disable(2), -- reset(3) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object, when read, always returns a value of ok(1). Setting this object to one of the acceptable values gives the following results: reset: reset the module's control logic enable: enable the module disable: disable the module Setting this object to any other values results in an error." ::= { ciscoLS1010ModuleEntry 8 } ciscoLS1010ModuleOperStatus OBJECT-TYPE SYNTAX OperStatus -- Rsyntax INTEGER { -- unknown(1), -- ok(2), -- fault(3), -- fanAlarm(4), -- partialFault(5), -- empty(6) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Operational status of the module." ::= { ciscoLS1010ModuleEntry 9 } ciscoLS1010ModuleHwVersionMinor OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The minor hardware version of the module." ::= { ciscoLS1010ModuleEntry 10 } ciscoLS1010ModuleSerialNumberString OBJECT-TYPE SYNTAX DisplayString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The serial number of the module." ::= { ciscoLS1010ModuleEntry 11 } ciscoLS1010SubModuleTable OBJECT-TYPE SYNTAX SEQUENCE OF CiscoLS1010SubModuleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of sub-module entries. The number of entries is given by the value of ciscoLS1010SlotNumSubModules." ::= { ciscoLS1010SubModuleGroup 1 } ciscoLS1010SubModuleEntry OBJECT-TYPE SYNTAX CiscoLS1010SubModuleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing information about one sub-module in a sub-slot of the module." INDEX { ciscoLS1010ModuleIndex, ciscoLS1010SubModuleIndex } ::= { ciscoLS1010SubModuleTable 1 } CiscoLS1010SubModuleEntry ::= SEQUENCE { ciscoLS1010SubModuleIndex INTEGER, ciscoLS1010SubModuleType INTEGER, ciscoLS1010SubModuleSerialNumber INTEGER, ciscoLS1010SubModuleHwVersion INTEGER, ciscoLS1010SubModuleSwVersion INTEGER, ciscoLS1010SubModuleDescr DisplayString, ciscoLS1010SubModuleNumPorts INTEGER, ciscoLS1010SubModuleAdminStatus INTEGER, ciscoLS1010SubModuleHwVersionMinor INTEGER, ciscoLS1010SubModuleOperStatus OperStatus, ciscoLS1010SubModuleSerialNumberString DisplayString } ciscoLS1010SubModuleIndex OBJECT-TYPE SYNTAX INTEGER(0..15) ACCESS not-accessible STATUS mandatory DESCRIPTION "A unique value for each sub-module within the module. This value is determined by sub-slot number where the sub-module is inserted." ::= { ciscoLS1010SubModuleEntry 1 } ciscoLS1010SubModuleType OBJECT-TYPE SYNTAX INTEGER { other(1), oc3Utp5(2), oc3SingleModeFiber(3), oc3MultiModeFiber(4), oc12SingleModeFiber(5), oc12MultiModeFiber(6), ds3(7), e3(8), cpuSwitch(9), featureFpga(10), featureAsic(11), t1(12), e1(13), e1bnc(14), oc3Mixed(15), cbrt1(16), cbr120e1(17), cbr75e1(18), quadDs3(19), quadE3(20), dualDs3(21), dualE3(22), oc12Mixed(23), atm25(24), featurePVC(25), routerProcessorAlpha(26), dualOC3SingleModeIRFiber(27), dualOC3MultiModeIRFiber(28), routerProcessorBeta(29), fratm1CT3(30), fratm4CE1(31), oc3SingleModeLRFiber(35), oc12SingleModeLRFiber(36), sixPortDS3(37), feUTP8p16k(40), feUTP8p64k(41), feMMF8p16k(42), feMMF8p64k(43), feUTP16p16k(44), feUTP16p64k(45), feMMF16p16k(46), feMMF16p64k(47), geF1p16k(48), geF1p64k(49), geF2p16k(50), geF2p64k(51), feBridge4p(52), feUTP8p16kFullDup(53), feUTP8p64kFullDup(54), routeProc(55), switch10GProc(56), featureNetClock(57), featureABR(58), geF8p64k(59), featureLite(60), s16pOC3MM(61), s16pOC3SM(62), s4pOC12MM(63), s4pOC12SM(64), atmIma8pT1(65), atmIma8pE1(66), atm25m4p(67), s1pOC48cSM(68), s1pOC48cSMLR(69), atmFIMBridge(70), atmFIMoc12MM(71), arm1p64k(80), arm2p64k(81), xpif1pGE16k(82), xpif1pGE64k(83), xpif1pGE256k(84), xpifAtm1pOC12SMIR64k(85), xpifAtm1pOC12SMIR256k(86), xpifAtm1pOC12MM64k(87), xpifAtm1pOC12MM256k(88), xpifAtm1pOC3SMIR64k(89), xpifAtm1pOC3SMIR256k(90), xpifAtm1pOC3MM64k(91), xpifAtm1pOC3MM256k(92), xpifPos1pOC12SMIR64k(93), xpifPos1pOC12SMIR256k(94), xpifPos1pOC12SMLR64k(95), xpifPos1pOC12SMLR256k(96), xpifArm2p256k(97), aclDaughter(98) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of sub-module." ::= { ciscoLS1010SubModuleEntry 2 } ciscoLS1010SubModuleSerialNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The serial number of the sub-module. Deprecated in favor of object ciscoLS1010SubModuleSerialNumberString. This object returns 0 for submodules using an alphanumeric numbering scheme." ::= { ciscoLS1010SubModuleEntry 3 } ciscoLS1010SubModuleHwVersion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The major hardware version of the sub-module. Together with ciscoLS1010SubModuleHwVersionMinor, this completely specifies the hardware version of the sub-module." ::= { ciscoLS1010SubModuleEntry 4 } ciscoLS1010SubModuleSwVersion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The software version number." ::= { ciscoLS1010SubModuleEntry 5 } ciscoLS1010SubModuleDescr OBJECT-TYPE SYNTAX DisplayString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "A descriptive string used by the agent to describe the module." ::= { ciscoLS1010SubModuleEntry 6 } ciscoLS1010SubModuleNumPorts OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of ports supported by this sub-module." ::= { ciscoLS1010SubModuleEntry 7 } ciscoLS1010SubModuleAdminStatus OBJECT-TYPE SYNTAX INTEGER { reset(1), ok(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object can be read/written as reset or ok." ::= { ciscoLS1010SubModuleEntry 8 } ciscoLS1010SubModuleHwVersionMinor OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The minor hardware version of the sub-module. Together with ciscoLS1010SubModuleHwVersion, this completely specifies the hardware version of the sub-module." ::= { ciscoLS1010SubModuleEntry 9 } ciscoLS1010SubModuleOperStatus OBJECT-TYPE SYNTAX OperStatus -- Rsyntax INTEGER { -- unknown(1), -- ok(2), -- fault(3), -- fanAlarm(4), -- partialFault(5), -- empty(6) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Operational status of the submodule." ::= { ciscoLS1010SubModuleEntry 10 } ciscoLS1010SubModuleSerialNumberString OBJECT-TYPE SYNTAX DisplayString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The serial number of the sub-module." ::= { ciscoLS1010SubModuleEntry 11 } ciscoLS1010PortTable OBJECT-TYPE SYNTAX SEQUENCE OF CiscoLS1010PortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of port entries. The number of entries is determined by the number of modules in the chassis, the number of sub-module in the module and the number of ports on each sub-module." ::= { ciscoLS1010PortGroup 1 } ciscoLS1010PortEntry OBJECT-TYPE SYNTAX CiscoLS1010PortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing information for a particular port on a sub-module." INDEX { ciscoLS1010ModuleIndex, ciscoLS1010SubModuleIndex, ciscoLS1010PortIndex } ::= { ciscoLS1010PortTable 1 } CiscoLS1010PortEntry ::= SEQUENCE { ciscoLS1010PortIndex INTEGER, ciscoLS1010PortIfIndex InterfaceIndex } ciscoLS1010PortIndex OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS not-accessible STATUS mandatory DESCRIPTION "An index value that uniquely identifies this port within a sub-module. The value is determined by the location of the port on the sub-module. Valid entries are 1 to the value of subModuleNumPorts for this sub-module." ::= { ciscoLS1010PortEntry 1 } ciscoLS1010PortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex -- Rsyntax INTEGER(1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The ifIndex value assigned to this port." ::= { ciscoLS1010PortEntry 2 } clsEnetPortTable OBJECT-TYPE SYNTAX SEQUENCE OF ClsEnetPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of ethernet port entries. This table is mainly to support ethernet port only." ::= { clsEnetPortGroup 1 } clsEnetPortEntry OBJECT-TYPE SYNTAX ClsEnetPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry contains information of a particular ethernet port." INDEX { ifIndex } ::= { clsEnetPortTable 1 } ClsEnetPortEntry ::= SEQUENCE { clsEnetPortDuplex INTEGER, clsEnetPortAdminSpeed INTEGER, clsEnetPortType INTEGER, clsEnetPortLinkStatus INTEGER } clsEnetPortDuplex OBJECT-TYPE SYNTAX INTEGER { unknown(1), auto(2), half(3), full(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the port is operating in half-duplex, full-duplex, or auto mode. If the port could not agree with the far end on port duplex, the port will be in auto(2) mode. Unknown(1) indicates either the port does not support duplex mode, or the duplex mode is none of the defined." ::= { clsEnetPortEntry 1 } clsEnetPortAdminSpeed OBJECT-TYPE SYNTAX INTEGER { unknown(1), auto(2), e10Mbps(3), e100Mbps(4), e1000Mbps(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the desired speed of the port in bits per second. The current operational speed of the port is determined by ifSpeed. If the port could not agree with the far end on port speed, the port will be in auto(2) mode, which will force the port to transmit in speed whichever is lower. Unknown(1) indicates either the port does not support admin speed, or the admin speed is none of the defined." ::= { clsEnetPortEntry 2 } clsEnetPortType OBJECT-TYPE SYNTAX INTEGER { unknown(1), e100BaseTX(2), e100BaseFX(3), e1000BaseLX(4), e1000BaseSX(5), empty(6) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of physical layer medium-dependent interface on the port. unknown(1) indicates that the port type is none of those defined. empty(6) indicates that the port is not present." ::= { clsEnetPortEntry 3 } clsEnetPortLinkStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), autoNegotiate(2), forceUp(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates how the link status of the port came up. autoNegotiate(2) -- the port will try to negotiate the link with the partner port. If successful, the link will come up, otherwise the link will remain down. forceUp(3) -- the port will force the link up irrespective of its partner port. This will bring up the link in full duplex only. Default is autoNegotiate(2)." ::= { clsEnetPortEntry 4 } clsPortLedTable OBJECT-TYPE SYNTAX SEQUENCE OF ClsPortLedEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of LED entries associated with a port." ::= { clsPortLedGroup 1 } clsPortLedEntry OBJECT-TYPE SYNTAX ClsPortLedEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry contains information of a particular LED associated with a particular port which is identified by ifIndex." INDEX { ifIndex, clsPortLedIndex } ::= { clsPortLedTable 1 } ClsPortLedEntry ::= SEQUENCE { clsPortLedIndex INTEGER, clsPortLedType INTEGER, clsPortLedStatus INTEGER } clsPortLedIndex OBJECT-TYPE SYNTAX INTEGER(1..255) ACCESS not-accessible STATUS mandatory DESCRIPTION "An index that uniquely identifies this LED among all the LEDs associated with the port identified by ifIndex. This value is related to the physical location of the LED, and is in ascending order from top to bottom, left to right." ::= { clsPortLedEntry 1 } clsPortLedType OBJECT-TYPE SYNTAX INTEGER { ledTx(1), ledRx(2), ledLink(3), led100Mbps(4), ledRxLoss(5), ledRxFullOut(6), ledRxSync(7), ledFullDuplex(8), ledOptDetect(9) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the type or label of the LED." ::= { clsPortLedEntry 2 } clsPortLedStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), on(2), off(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the status of the LED. Unknown(1) indicates either the LED status is not supported or the status is none of the defined." ::= { clsPortLedEntry 3 } ciscoAtmCpuAdminStatus OBJECT-TYPE SYNTAX INTEGER { reset(1), ok(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Reset will reload the CPU board." ::= { ciscoLS1010CpuSwitchGroup 1 } ciscoAtmSwitchTotalBuffer OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The total cell buffer count in switch's shared memory." ::= { ciscoLS1010CpuSwitchGroup 2 } ciscoAtmSwitchFreeBuffer OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The free cell buffer count in switch's shared memory." ::= { ciscoLS1010CpuSwitchGroup 3 } ciscoAtmSwitchDiscardCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total discarded cells of the switch." ::= { ciscoLS1010CpuSwitchGroup 4 } ciscoAtmSwitchInvalidCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total invalid cells of the switch." ::= { ciscoLS1010CpuSwitchGroup 5 } ciscoAtmSwitchInvalidCellHeaderTable OBJECT-TYPE SYNTAX SEQUENCE OF CiscoAtmSwitchInvalidCellHeaderEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of invalid cell header entries." ::= { ciscoLS1010CpuSwitchGroup 6 } ciscoAtmSwitchInvalidCellHeaderEntry OBJECT-TYPE SYNTAX CiscoAtmSwitchInvalidCellHeaderEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "a entry of invalid cell header." INDEX { ciscoAtmSwitchInvalidCellHeaderIndex } ::= { ciscoAtmSwitchInvalidCellHeaderTable 1 } CiscoAtmSwitchInvalidCellHeaderEntry ::= SEQUENCE { ciscoAtmSwitchInvalidCellHeaderIndex INTEGER, ciscoAtmSwitchInvalidCellHeader OCTET STRING } ciscoAtmSwitchInvalidCellHeaderIndex OBJECT-TYPE SYNTAX INTEGER(1..64) ACCESS not-accessible STATUS mandatory DESCRIPTION "A sequence number that identifies a invalid cell header entry in the table." ::= { ciscoAtmSwitchInvalidCellHeaderEntry 1 } ciscoAtmSwitchInvalidCellHeader OBJECT-TYPE SYNTAX OCTET STRING(SIZE(5)) ACCESS read-only STATUS mandatory DESCRIPTION "The most recently received invalid cells header. octet 0 is port number (0-32), octet 1 bit 7-5 is PTI, octet 1 bit 4 is CLP, octet 1 bit 3-0 is GFC, octet 2 is VPI, octet 3 is high byte of VCI octet 4 is low byte of VCI." ::= { ciscoAtmSwitchInvalidCellHeaderEntry 2 } ciscoAtmCpuTerminateOamFlow OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS obsolete DESCRIPTION "Terminate all the incoming OAM cells to the CPU port." DEFVAL { false } ::= { ciscoLS1010CpuSwitchGroup 7 } ciscoAtmInterceptEndToEndOamFlow OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether incoming end-to-end OAM flow cells are sent to the switch CPU. If the value is 'true', all incoming end-to-end OAM flow cells, including those on transit connections, are sent to the switch CPU. This value may be modified at any time. The modified value will apply to all existing connections. Note that if the value is 'false', the switch can not use the ATM PING application for end-to-end loopback on transit connections, since the end-to-end OAM cells on such connections will not be seen by the switch CPU." DEFVAL { true } ::= { ciscoLS1010CpuSwitchGroup 8 } ciscoLS1010ChassisFailureNotification TRAP-TYPE -- Reverse mappable trap ENTERPRISE ciscoLS1010ChassisMIBNotificationPrefix VARIABLES { ciscoLS1010ChassisPs0Status, ciscoLS1010ChassisPs1Status, ciscoLS1010ChassisFanStatus, ciscoLS1010Chassis12VoltStatus, ciscoLS1010ChassisTempStatus } -- Status -- mandatory DESCRIPTION "Agent detects a change in the status of ps0, ps1, fan, 12V line, and/or chassis temperature. This notification will be generated when the status changes from no-fault to fault, and also when the status changes from fault to no-fault." ::= 1 ciscoLS1010ChassisChangeNotification TRAP-TYPE -- Reverse mappable trap ENTERPRISE ciscoLS1010ChassisMIBNotificationPrefix -- Status -- mandatory DESCRIPTION "Agent detects any hot-swap component change or changes in the chassis." ::= 2 ciscoLS1010ChassisMIBGroup OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBGroups 1 } -- OBJECT-GROUP -- Status -- obsolete -- Descr -- A collection of objects providing rhino chassis information -- objects -- ciscoLS1010ChassisSysType, ciscoLS1010ChassisBkplType, -- ciscoLS1010ChassisPs0Type, ciscoLS1010ChassisPs0AdminStatus, -- ciscoLS1010ChassisPs0Status, ciscoLS1010ChassisPs0Led, -- ciscoLS1010ChassisPs1Type, ciscoLS1010ChassisPs1AdminStatus, -- ciscoLS1010ChassisPs1Status, ciscoLS1010ChassisPs1Led, -- ciscoLS1010ChassisFanStatus, ciscoLS1010ChassisFanLed, -- ciscoLS1010ChassisCardStatusLed, -- ciscoLS1010ChassisEnetLinkLed, ciscoLS1010Chassis12VoltStatus, -- ciscoLS1010ChassisTempStatus, -- ciscoLS1010ChassisPcmciaSlot0Type, -- ciscoLS1010ChassisPcmciaSlot1Type, ciscoLS1010ChassisNumSlots, -- ciscoLS1010ChassisLastChange, ciscoLS1010ChassisFailureAction, -- ciscoLS1010ChassisChangeAction, -- ciscoLS1010ChassisInletTempStatus, ciscoLS1010ModuleType, -- ciscoLS1010ModuleSerialNumber, ciscoLS1010ModuleHwVersion, -- ciscoLS1010ModuleSwVersion, ciscoLS1010ModuleDescr, -- ciscoLS1010ModuleNumSubModules, ciscoLS1010ModuleAdminStatus, -- ciscoLS1010ModuleOperStatus, ciscoLS1010SubModuleType, -- ciscoLS1010SubModuleSerialNumber, -- ciscoLS1010SubModuleHwVersion, ciscoLS1010SubModuleSwVersion, -- ciscoLS1010SubModuleDescr, ciscoLS1010SubModuleNumPorts, -- ciscoLS1010SubModuleAdminStatus, ciscoLS1010PortIfIndex, -- ciscoAtmCpuAdminStatus, ciscoAtmSwitchTotalBuffer, -- ciscoAtmSwitchFreeBuffer, ciscoAtmSwitchDiscardCells, -- ciscoAtmSwitchInvalidCells, ciscoAtmSwitchInvalidCellHeader ciscoLS1010ChassisMIBObsoleteGroup OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBGroups 2 } -- OBJECT-GROUP -- Status -- obsolete -- Descr -- A collection of objects providing rhino chassis information -- which are obsolete. -- objects -- ciscoAtmCpuTerminateOamFlow ciscoLS1010ChassisMIBRev1Group OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBGroups 3 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects useful for reporting the hardware -- version of sub-modules in the chassis. -- objects -- ciscoLS1010SubModuleHwVersionMinor ciscoLS1010ChassisMIBClockingGroup OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBGroups 4 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects useful for managing clocking. -- objects -- ciscoLS1010ChassisClockingMode, -- ciscols1010SystemClockSourceStatus, -- ciscols1010SystemClockSourcePriority ciscoLS1010ChassisMIBGroup1 OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBGroups 5 } -- OBJECT-GROUP -- Status -- obsolete -- Descr -- A collection of objects for managing the LS1010 chassis. -- objects -- ciscoLS1010ChassisSysType, ciscoLS1010ChassisBkplType, -- ciscoLS1010ChassisPs0Type, ciscoLS1010ChassisPs0AdminStatus, -- ciscoLS1010ChassisPs0Status, ciscoLS1010ChassisPs0Led, -- ciscoLS1010ChassisPs1Type, ciscoLS1010ChassisPs1AdminStatus, -- ciscoLS1010ChassisPs1Status, ciscoLS1010ChassisPs1Led, -- ciscoLS1010ChassisFanStatus, ciscoLS1010ChassisFanLed, -- ciscoLS1010ChassisCardStatusLed, -- ciscoLS1010ChassisEnetLinkLed, ciscoLS1010Chassis12VoltStatus, -- ciscoLS1010ChassisTempStatus, -- ciscoLS1010ChassisPcmciaSlot0Type, -- ciscoLS1010ChassisPcmciaSlot1Type, ciscoLS1010ChassisNumSlots, -- ciscoLS1010ChassisLastChange, ciscoLS1010ChassisFailureAction, -- ciscoLS1010ChassisChangeAction, ciscoLS1010ModuleType, -- ciscoLS1010ModuleSerialNumber, ciscoLS1010ModuleHwVersion, -- ciscoLS1010ModuleSwVersion, ciscoLS1010ModuleDescr, -- ciscoLS1010ModuleNumSubModules, ciscoLS1010ModuleAdminStatus, -- ciscoLS1010SubModuleType, ciscoLS1010SubModuleSerialNumber, -- ciscoLS1010SubModuleHwVersion, ciscoLS1010SubModuleSwVersion, -- ciscoLS1010SubModuleDescr, ciscoLS1010SubModuleNumPorts, -- ciscoLS1010SubModuleAdminStatus, -- ciscoLS1010SubModuleOperStatus, -- ciscoLS1010SubModuleHwVersionMinor, ciscoLS1010PortIfIndex, -- ciscoAtmCpuAdminStatus, ciscoAtmSwitchTotalBuffer, -- ciscoAtmSwitchFreeBuffer, ciscoAtmSwitchDiscardCells, -- ciscoAtmSwitchInvalidCells, ciscoAtmSwitchInvalidCellHeader, -- ciscoAtmInterceptEndToEndOamFlow clsEnetPortGroup1 OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBGroups 6 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects for managing ethernet ports. -- objects -- clsEnetPortDuplex, clsEnetPortAdminSpeed, clsEnetPortType, -- clsEnetPortLinkStatus clsPortLedGroup1 OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBGroups 7 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects for showing port LEDs. -- objects -- clsPortLedType, clsPortLedStatus clsOperStatusGroup OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBGroups 8 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects for displaying operational status of -- modules and sub-modules in the chassis. -- objects -- ciscoLS1010ModuleOperStatus, ciscoLS1010SubModuleOperStatus clsInletTempGroup OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBGroups 9 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects for reporting inlet temperature. -- objects -- ciscoLS1010ChassisInletTempStatus ciscoLS1010ChassisMIBGroup2 OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBGroups 10 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects for managing the -- LS1010 chassis. -- objects -- ciscoLS1010ChassisSysType, ciscoLS1010ChassisBkplType, -- ciscoLS1010ChassisPs0Type, ciscoLS1010ChassisPs0AdminStatus, -- ciscoLS1010ChassisPs0Status, ciscoLS1010ChassisPs0Led, -- ciscoLS1010ChassisPs1Type, ciscoLS1010ChassisPs1AdminStatus, -- ciscoLS1010ChassisPs1Status, ciscoLS1010ChassisPs1Led, -- ciscoLS1010ChassisFanStatus, ciscoLS1010ChassisFanLed, -- ciscoLS1010ChassisCardStatusLed, -- ciscoLS1010ChassisEnetLinkLed, ciscoLS1010Chassis12VoltStatus, -- ciscoLS1010ChassisTempStatus, -- ciscoLS1010ChassisPcmciaSlot0Type, -- ciscoLS1010ChassisPcmciaSlot1Type, ciscoLS1010ChassisNumSlots, -- ciscoLS1010ChassisLastChange, ciscoLS1010ChassisFailureAction, -- ciscoLS1010ChassisChangeAction, ciscoLS1010ModuleType, -- ciscoLS1010ModuleHwVersion, ciscoLS1010ModuleSwVersion, -- ciscoLS1010ModuleDescr, ciscoLS1010ModuleNumSubModules, -- ciscoLS1010ModuleAdminStatus, ciscoLS1010SubModuleType, -- ciscoLS1010SubModuleHwVersion, ciscoLS1010SubModuleSwVersion, -- ciscoLS1010SubModuleDescr, ciscoLS1010SubModuleNumPorts, -- ciscoLS1010SubModuleAdminStatus, -- ciscoLS1010SubModuleOperStatus, -- ciscoLS1010SubModuleHwVersionMinor, ciscoLS1010PortIfIndex, -- ciscoAtmCpuAdminStatus, ciscoAtmSwitchTotalBuffer, -- ciscoAtmSwitchFreeBuffer, ciscoAtmSwitchDiscardCells, -- ciscoAtmSwitchInvalidCells, ciscoAtmSwitchInvalidCellHeader, -- ciscoAtmInterceptEndToEndOamFlow, -- ciscoLS1010ModuleHwVersionMinor, -- ciscoLS1010ModuleSerialNumberString, -- ciscoLS1010SubModuleSerialNumberString ciscoLS1010ChassisMIBDeprecatedGroup OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBGroups 11 } -- OBJECT-GROUP -- Status -- deprecated -- Descr -- A collection of objects providing rhino -- chassis information which are obsolete. -- objects -- ciscoLS1010ModuleSerialNumber, -- ciscoLS1010SubModuleSerialNumber ciscoLS1010ChassisMIBNotificationGroup OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBGroups 12 } -- NOTIFICATION-GROUP -- Status -- mandatory -- Descr -- A collection of notifications supported -- by LS1010 chassis. -- notifications -- ciscoLS1010ChassisFailureNotification, -- ciscoLS1010ChassisChangeNotification ciscoLS1010ChassisMIBCompliance OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBCompliances 1 } -- MODULE-COMPLIANCE -- Status -- obsolete -- Descr -- The compliance statement for entities which implement -- the Cisco LS1010 Chassis MIB. This statement was -- obsoleted by ciscoLS1010ChassisMIBComplianceRev1. -- Module -- >>current<< -- MandGroup -- ciscoLS1010ChassisMIBGroup ciscoLS1010ChassisMIBComplianceRev1 OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBCompliances 2 } -- MODULE-COMPLIANCE -- Status -- obsolete -- Descr -- The compliance statement for entities which implement -- the Cisco LS1010 Chassis MIB. This statement was -- obsoleted by ciscoLS1010ChassisMIBComplianceRev2. -- Module -- >>current<< -- MandGroup -- ciscoLS1010ChassisMIBGroup -- MandGroup -- ciscoLS1010ChassisMIBRev1Group ciscoLS1010ChassisMIBComplianceRev2 OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBCompliances 3 } -- MODULE-COMPLIANCE -- Status -- obsolete -- Descr -- The compliance statement for entities which implement -- the Cisco LS1010 Chassis MIB -- Module -- >>current<< -- MandGroup -- ciscoLS1010ChassisMIBGroup -- MandGroup -- ciscoLS1010ChassisMIBRev1Group -- MandGroup -- ciscoLS1010ChassisMIBClockingGroup ciscoLS1010ChassisMIBComplianceRev3 OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBCompliances 4 } -- MODULE-COMPLIANCE -- Status -- obsolete -- Descr -- The compliance statement for entities which implement -- the Cisco LS1010 Chassis MIB. -- Module -- >>current<< -- MandGroup -- ciscoLS1010ChassisMIBGroup1 -- MandGroup -- ciscoLS1010ChassisMIBClockingGroup ciscoLS1010ChassisMIBComplianceRev4 OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBCompliances 5 } -- MODULE-COMPLIANCE -- Status -- obsolete -- Descr -- The compliance statement for entities which implement -- the Cisco LS1010 Chassis MIB. -- Module -- >>current<< -- MandGroup -- ciscoLS1010ChassisMIBGroup1 -- MandGroup -- ciscoLS1010ChassisMIBClockingGroup -- MandGroup -- clsEnetPortGroup1 -- MandGroup -- clsPortLedGroup1 ciscoLS1010ChassisMIBComplianceRev5 OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBCompliances 6 } -- MODULE-COMPLIANCE -- Status -- obsolete -- Descr -- The compliance statement for the Cisco 6400 product. -- Module -- >>current<< -- MandGroup -- ciscoLS1010ChassisMIBGroup1 -- MandGroup -- ciscoLS1010ChassisMIBClockingGroup -- MandGroup -- clsOperStatusGroup -- MandGroup -- clsInletTempGroup ciscoLS1010ChassisMIBComplianceRev6 OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBCompliances 7 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- The compliance statement for this MIB. -- Module -- >>current<< -- MandGroup -- ciscoLS1010ChassisMIBGroup2 -- MandGroup -- ciscoLS1010ChassisMIBClockingGroup -- ObjVar -- ciscoLS1010ModuleSerialNumberString -- ObjVar -- ciscoLS1010SubModuleSerialNumberString END