-- MIB file created 01-Jul-2008 10:20:12, by -- SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com CISCO-SERVICE-CONTROL-LINK-MIB DEFINITIONS ::= BEGIN -- From file: "CISCO-SERVICE-CONTROL-LINK-MIB.my" -- Compile options "4 7 F H N O W 03 06 0B 0G 0N 0T" IMPORTS PhysicalIndex, entPhysicalIndex FROM ENTITY-MIB TruthValue FROM SNMPv2-TC-v1 EntPhysicalIndexOrZero FROM CISCO-TC ciscoMgmt FROM CISCO-SMI OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215; ciscoServiceControlLinkMIB OBJECT IDENTIFIER ::= { ciscoMgmt 631 } -- MODULE-IDENTITY -- LastUpdated -- 200706260000Z -- OrgName -- Cisco Systems, Inc. -- ContactInfo -- Cisco Systems -- Customer Service -- -- Postal: 170 W Tasman Drive -- San Jose, CA 95134 -- USA -- -- Tel: +1 800 553-NETS -- -- E-mail: cs-excelsior-dev@cisco.com -- Descr -- This MIB module provides information about the status and -- configuration of links used by service control entities. -- -- The link on a service control entity is a contained entity that -- joins subscriber side port(s) to network side port(s). -- RevDate -- 200706260000Z -- RevDescr -- Initial version of this MIB module. ciscoSCLinkMIBNotifs OBJECT IDENTIFIER ::= { ciscoServiceControlLinkMIB 0 } ciscoSCLinkMIBObjects OBJECT IDENTIFIER ::= { ciscoServiceControlLinkMIB 1 } ciscoSCLinkMIBConform OBJECT IDENTIFIER ::= { ciscoServiceControlLinkMIB 2 } ciscoSCLinkMIBCompliances OBJECT IDENTIFIER ::= { ciscoSCLinkMIBConform 1 } ciscoSCLinkMIBObjectGroups OBJECT IDENTIFIER ::= { ciscoSCLinkMIBConform 2 } CsceLinkModeType ::= INTEGER { other(1), bypass(2), forwarding(3), cutoff(4), sniffing(5) } -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- An enumerated value which identifies the various modes of a -- link. -- 'other' -- None of the following. -- 'bypass' -- The traffic is forwarded from one port to the -- other using an internal splitter. -- 'forwarding' -- The traffic is forwarded through the internal -- hardware and software modules of the system. -- 'cutoff' -- The traffic is dropped by the system. -- 'sniffing' -- The traffic is passed in the same manner as in -- 'bypass' mode, however a copy of the traffic is -- made and analyzed internally in the box. cscLinkNotifsEnabled OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object controls whether the cServiceLinkModeChange notification is generated. A 'false' value will prevent notifications from being generated." ::= { ciscoSCLinkMIBObjects 1 } cscLinkStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF CscLinkStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table provides information regarding the configuration and status of the links that pass through the service control entity and carry inband traffic. The link is an entity and has an entry in the entPhysicalTable of the ENTITY-MIB with entPhysicalClass of 'other' and is contained in entity 'chassis' or 'module'. A link entity contains entities from the entPhysicalTable of entPhysicalClass 'port'. The number of entries in this table is determined by the number of service control entities in the entPhysicalTable and the number of links supported by each. Each Link entity contains at least a subscriber side port entity and a network side port entity." ::= { ciscoSCLinkMIBObjects 2 } cscLinkStatusEntry OBJECT-TYPE SYNTAX CscLinkStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (conceptual row) in the cscLinkStatusTable created by the agent for every link entity contained in the service control entity after initilization. entPhysicalIndex is index for this table which represents entities of 'other' entPhysicalClass." INDEX { entPhysicalIndex } ::= { cscLinkStatusTable 1 } CscLinkStatusEntry ::= SEQUENCE { cscLinkAdminModeOnActive CsceLinkModeType, cscLinkAdminModeOnFailure CsceLinkModeType, cscLinkOperMode CsceLinkModeType, cscLinkAdminReflectionEnable INTEGER, cscLinkSubscriberSidePortIndex EntPhysicalIndexOrZero, cscLinkNetworkSidePortIndex EntPhysicalIndexOrZero, cscLinkAdminReflectionState INTEGER } cscLinkAdminModeOnActive OBJECT-TYPE SYNTAX CsceLinkModeType -- Rsyntax INTEGER { -- other(1), -- bypass(2), -- forwarding(3), -- cutoff(4), -- sniffing(5) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates the desired mode of the link when the entity that contains this link has the operating status of active and the entity is not in boot or failure state." ::= { cscLinkStatusEntry 1 } cscLinkAdminModeOnFailure OBJECT-TYPE SYNTAX CsceLinkModeType -- Rsyntax INTEGER { -- other(1), -- bypass(2), -- forwarding(3), -- cutoff(4), -- sniffing(5) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates the desired mode of the link when the entity that contains this link has the operational status of failure." ::= { cscLinkStatusEntry 2 } cscLinkOperMode OBJECT-TYPE SYNTAX CsceLinkModeType -- Rsyntax INTEGER { -- other(1), -- bypass(2), -- forwarding(3), -- cutoff(4), -- sniffing(5) -- } ACCESS read-only STATUS mandatory DESCRIPTION "This object reflects the operational mode of the link." ::= { cscLinkStatusEntry 3 } cscLinkAdminReflectionEnable OBJECT-TYPE SYNTAX INTEGER { reflectionEnabled(1), reflectionOnAllPortsEnabled(2), reflectionDisabled(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates how the failure status of the physical link on one port should be reflected to the other port(s) of the link. 'reflectionEnabled' : Failure is reflected on the other port of the link. 'reflectionOnAllPortsEnabled': Failure of Physical Link is reflected on all other ports on all links. 'reflectionDisabled' : Port status is not reflected on the link." ::= { cscLinkStatusEntry 4 } cscLinkSubscriberSidePortIndex OBJECT-TYPE SYNTAX EntPhysicalIndexOrZero -- Rsyntax INTEGER(0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies the entPhysicalIndex value that uniquely identifies the port entity contained in this link entity in the entPhysicalTable. This port entity is connected to the subscriber side." ::= { cscLinkStatusEntry 5 } cscLinkNetworkSidePortIndex OBJECT-TYPE SYNTAX EntPhysicalIndexOrZero -- Rsyntax INTEGER(0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies the entPhysicalIndex value that uniquely identifies the port entity contained in this link entity in the entPhysicalTable. This port entity is connected to the network side." ::= { cscLinkStatusEntry 6 } cscLinkAdminReflectionState OBJECT-TYPE SYNTAX INTEGER { noLinkReflection(1), reflectingFailureToNetwork(2), reflectingFailureToSubscriber(3), reflectingFailureToBoth(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates how the link propagates the failure state between the ports on each end of the link. 'noLinkReflection' : No failure is currently being reflected. 'reflectingFailureToNetwork' : Link failure on subscriber side is reflected to the network side. 'reflectingFailureToSubscriber': Link failure on network side is reflected to the subscriber side. 'reflectingFailureToBoth' : Failure reflected to both sides of the link." ::= { cscLinkStatusEntry 7 } ciscoServiceControlLinkModeChange TRAP-TYPE -- Reverse mappable trap ENTERPRISE ciscoServiceControlLinkMIB VARIABLES { cscLinkOperMode } -- Status -- mandatory DESCRIPTION "This notification signifies that the agent entity has detected that the cscLinkOperMode object in this MIB has changed." ::= 1 cSCLinkMIBObjectGroup OBJECT IDENTIFIER ::= { ciscoSCLinkMIBObjectGroups 1 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- Collection of objects for link status. -- objects -- cscLinkAdminModeOnActive, cscLinkAdminModeOnFailure, -- cscLinkOperMode, cscLinkAdminReflectionEnable, -- cscLinkSubscriberSidePortIndex, cscLinkNetworkSidePortIndex, -- cscLinkAdminReflectionState cSCLinkNotifControlGroup OBJECT IDENTIFIER ::= { ciscoSCLinkMIBObjectGroups 3 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- This is a collection of objects that controls the -- enable/disable of notifications defined in this MIB. -- objects -- cscLinkNotifsEnabled cSCLinkMIBNotificationGroup OBJECT IDENTIFIER ::= { ciscoSCLinkMIBObjectGroups 2 } -- NOTIFICATION-GROUP -- Status -- mandatory -- Descr -- This group contains notifications of this MIB. -- notifications -- ciscoServiceControlLinkModeChange cServiceLinkMIBCompliance OBJECT IDENTIFIER ::= { ciscoSCLinkMIBCompliances 1 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- The compliance statement for SNMP Agents which implement this -- MIB. -- Module -- >>current<< -- MandGroup -- cSCLinkMIBObjectGroup -- MandGroup -- cSCLinkMIBNotificationGroup -- OptGroup -- cSCLinkNotifControlGroup END