-- MIB file created 27-Jan-2012 10:55:58, by
--   SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com

CISCO-SUBSCRIBER-SESSION-TC-MIB DEFINITIONS ::= BEGIN

-- From file: "CISCO-SUBSCRIBER-SESSION-TC-MIB.my"
-- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T"

IMPORTS
    ciscoMgmt
            FROM CISCO-SMI;

ciscoSubscriberSessionTcMIB OBJECT IDENTIFIER ::= { ciscoMgmt 785 }
-- MODULE-IDENTITY
--  LastUpdated
--    201201270000Z
--  OrgName
--    Cisco Systems, Inc.
--  ContactInfo
--    Cisco Systems
--    Customer Service
--    
--    Postal: 170 W Tasman Drive
--    San Jose, CA 95134
--    
--    Tel: +1 800 553-NETS
--    
--    E-mail: cs-snmp@cisco.com
--  Descr
--    This MIB module defines textual conventions describing
--    subscriber sessions.
--  RevDate
--    200709260000Z
--  RevDescr
--    The initial version of the MIB module.

SubSessionType ::= INTEGER {
        all(1),
        other(2),
        pppSubscriber(3),
        pppoeSubscriber(4),
        l2tpSubscriber(5),
        l2fSubscriber(6),
        ipInterfaceSubscriber(7),
        ipPktSubscriber(8),
        ipDhcpv4Subscriber(9),
        ipRadiusSubscriber(10),
        l2MacSubscriber(11),
        l2Dhcpv4Subscriber(12),
        l2RadiusSubscriber(13)
        }
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    An enumerated integer-value describing the type of subscriber
--    session.  This value has the intent of refining the interface
--    type assigned to a subscriber session.  The interface type
--    assigned to a subscriber session groups those types of
--    subscriber sessions with similar interface semantics.
--    
--    A PPP subscriber session consists of a PPP connection
--    (RFC-1661)
--    and has an interface type of 'ppp'.  The following subscriber
--    types refine PPP subscriber sessions:
--    
--        'pppSubscriber'
--            A PPP connection initiated over a circuit (e.g., an
--    ISDN
--            line or ATM VC) using the LCP (RFC-1661).
--    
--        'pppoeSubscriber'
--            A PPP connection over Ethernet (RFC-2516), initiated
--            by a PADI (PPPoE Active Discovery Initiation) packet.
--    
--        'l2tpSubscriber'
--            A PPP connection over an L2TP tunnel (RFC-2661),
--            initiated by an Incoming-Call-Request control message.
--    
--        'l2fSubscriber'
--            A PPP connection over an L2F tunnel (RFC-2341),
--            initiated by a L2F_OPEN message with a non-zero MID.
--    
--    An IP subscriber session consists of the routed traffic
--    associated with a subscriber IP address having an interface
--    type of 'ipSubscriber'.  Routed traffic describes IP traffic
--    that transits at least one router.  If a subscriber's IP
--    address
--    is not unique to the system, further distinguishing
--    characteristics, such as VRF or MAC address, form part of the
--    subscriber's identity.  The following subscriber types refine
--    IP
--    subscriber sessions:
--    
--        'ipInterfaceSubscriber'
--            An IP subcriber session provisioned by the system's
--            configuration which consists of all traffic received by
--            the interface to which the provisioning applies.
--    
--        'ipPktSubscriber'
--            An IP subscriber session initiated by the receipt of
--    the
--            first packet received with an unclassified source IP
--            address.
--    
--        'ipDhcpv4Subscriber'
--            An IP subscriber session initiated by the receipt of a
--            DHCPv4 DISCOVER packet (RFC-2131).
--    
--        'ipRadiusSubscriber'
--            An IP subscriber session initiated by the receipt of a
--            RADIUS Access-Request packet (RFC-2865).
--    
--    An L2 subscriber session consists of the non-routed traffic
--    associated with a subscriber IP address having an interface
--    type of 'l2Subscriber'.  Non-routed traffic describes IP
--    traffic
--    that doesn't transit a router, meaning that the subscriber must
--    be directly connected to the system or have a connection
--    through
--    an L2 access network (e.g., bridges, switches, and tunnels).
--    The
--    following subscriber types refine L2 subscriber sessions:
--    
--        'l2MacPacketSubscriber'
--            An L2 subscriber session initiated by the receipt of
--    the
--            first layer 2 packet with an unclassified source MAC
--            address.
--    
--        'l2Dhcpv4Subscriber'
--            An L2 subscriber session initiated by the receipt of a
--            DHCPv4 DISCOVER packet (RFC-2131).
--    
--        'l2RadiusSucriber'
--            An L2 subscriber session initiated by the receipt of a
--            RADIUS Access-Request packet (RFC-2865).
--    
--    The system should assign the value 'other' to any subscriber
--    session not recognized by the implementation of a MIB module
--    using this textual convention.
--    
--    The value 'all' represents a special value used to indicate all
--    subscriber session types.  For example, a scope of aggregation
--    that includes all subscriber session types uses this value to
--    indicate this fact.
--  Refer
--    W. Simpson, 'The Point-to-Point Protocol (PPP)',
--    RFC-1661,
--    July 1994.
--    
--    R. Droms, 'Dynamic Host Configuration Protocol', RFC-2131,
--    March
--    1997.
--    
--    A. Valencia, M. Littlewood, T. Kolar, 'Cisco Layer Two
--    Forwarding Protocol (L2F)', RFC-2341, May 1998.
--    
--    L. Mamakos, K. Lidl, J. Evarts, D. Carrel, D. Simone, and
--    R. Wheeler, 'A Method for Transmitting PPP Over Ethernet
--    (PPPoE)', RFC-2516, February 1999.
--    
--    W. Townsley, A. Valencia, A. Rubens, G. Pall, G. Zorn,
--    and
--    B. Palter, 'Layer Two Tunneling Protocol (L2TP)',
--    RFC-2661,
--    August 1999.
--    
--    C. Rigney, S. Willens, A. Rubens, and W. Simpson, 'Remote
--    Authentication Dial-In User Service (RADIUS)', RFC-2865,
--    June
--    2000.

SubSessionTypes ::= OCTET STRING(SIZE(1..2))
        -- BITS are:
        --   pppSubscriber(0)
        --   pppoeSubscriber(1)
        --   l2tpSubscriber(2)
        --   l2fSubscriber(3)
        --   ipInterfaceSubscriber(4)
        --   ipPktSubscriber(5)
        --   ipDhcpv4Subscriber(6)
        --   ipRadiusSubscriber(7)
        --   l2MacSubscriber(8)
        --   l2Dhcpv4Subscriber(9)
        --   l2RadiusSubscriber(10)
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    A bit string describing a set of subscriber session types:
--    
--    'pppSubscriber'
--        A PPP connection initiated over a circuit (e.g., an ISDN
--        line or ATM VC) using the LCP (RFC-1661).
--    
--    'pppoeSubscriber'
--        A PPP connection over Ethernet (RFC-2516), initiated
--        by a PADI (PPPoE Active Discovery Initiation) packet.
--    
--    'l2tpSubscriber'
--        A PPP connection over an L2TP tunnel (RFC-2661),
--        initiated by an Incoming-Call-Request control message.
--    
--    'l2fSubscriber'
--        A PPP connection over an L2F tunnel (RFC-2341),
--        initiated by a L2F_OPEN message with a non-zero MID.
--    
--    'ipInterfaceSubscriber'
--        An IP subcriber session provisioned by the system's
--        configuration which consists of all traffic received by
--        the interface the provisioning applies.
--    
--    'ipPktSubscriber'
--        An IP subscriber session initiated by the receipt of
--        the first packet received with an unclassified source IP
--        address.
--    
--    'ipDhcpv4Subscriber'
--        An IP subscriber session initiated by the receipt of a
--        DHCPv4 DISCOVER packet (RFC-2131).
--    
--    'ipRadiusSubscriber'
--        An IP subscriber session initiated by the receipt of a
--        RADIUS Access-Request packet (RFC-2865).
--    
--    'l2MacSubscriber'
--        An L2 subscriber session initiated by the receipt of the
--        first layer 2 packet with an unclassified source MAC
--        address.
--    
--    'l2Dhcpv4Subscriber'
--        An L2 subscriber session initiated by the receipt of a
--        DHCPv4 DISCOVER packet (RFC-2131).
--    
--    'l2RadiusSubscriber'
--        An L2 subscriber session initiated by the receipt of a
--        RADIUS Access-Request packet (RFC-2865).
--    
--    For more details regarding subscriber session types, see the
--    descriptive text associated with the SubSessionType textual
--    convention.
--  Refer
--    W. Simpson, 'The Point-to-Point Protocol (PPP)', RFC-1661,
--    July 1994.
--    
--    R. Droms, 'Dynamic Host Configuration Protocol', RFC-2131, March
--    1997.
--    
--    A. Valencia, M. Littlewood, T. Kolar, 'Cisco Layer Two
--    Forwarding Protocol (L2F)', RFC-2341, May 1998.
--    
--    L. Mamakos, K. Lidl, J. Evarts, D. Carrel, D. Simone, and
--    R. Wheeler, 'A Method for Transmitting PPP Over Ethernet
--    (PPPoE)', RFC-2516, February 1999.
--    
--    W. Townsley, A. Valencia, A. Rubens, G. Pall, G. Zorn, and
--    B. Palter, 'Layer Two Tunneling Protocol (L2TP)', RFC-2661,
--    August 1999.
--    
--    C. Rigney, S. Willens, A. Rubens, and W. Simpson, 'Remote
--    Authentication Dial-In User Service (RADIUS)', RFC-2865, June
--    2000.

SubSessionState ::= INTEGER {
        other(1),
        pending(2),
        up(3)
        }
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    An enumerated integer-value describing the state of a
--    subscriber session:
--    
--        'other'
--            The subscriber session is in a state not recognized by
--            the implementation of a MIB module using this textual
--            convention.
--    
--        'pending'
--            The subscriber session is in the PENDING state;
--            that is, the subscriber session has been initiated and
--            the system is in the process of establishing the
--            subscriber session.
--    
--        'up'
--            The subscriber session is in the UP state; that is, the
--            system has established the subscriber session.

SubSessionRedundancyMode ::= INTEGER {
        none(1),
        other(2),
        active(3),
        standby(4)
        }
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    An enumerated integer-value describing the redundancy mode in
--    which a subscriber session is operating:
--    
--        'none'
--            The subscriber session is not part of a redundant
--            configuration.
--    
--        'other'
--            The subscriber session is part of a redundant
--            configuration and is in a state not recognized by this
--            MIB module.
--    
--        'active'
--            The subscriber session is part of a redundant
--            configuration and is forwarding traffic from the
--            subscriber.
--    
--        'standby'
--            The subscriber session is part of a redundant
--            configuration and ready to become active in the case of
--            a fail-over event (e.g., linecard failure).


END