-- MIB file created 30-Dec-2001 22:12:01, by
--   SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com

CISCO-SWITCH-USAGE-MIB DEFINITIONS ::= BEGIN

-- From file: "CISCO-SWITCH-USAGE-MIB.my"
-- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T"

IMPORTS
    ifIndex
            FROM IF-MIB
    ciscoMgmt
            FROM CISCO-SMI
    Counter
            FROM RFC1155-SMI
    OBJECT-TYPE
            FROM RFC-1212;

ciscoSwitchUsageMIB OBJECT IDENTIFIER ::= { ciscoMgmt 201 }
-- MODULE-IDENTITY
--  LastUpdated
--    200105020000Z
--  OrgName
--    Cisco Systems, Inc.
--  ContactInfo
--           Cisco Systems
--            Customer Service
--    
--    Postal: 170 W Tasman Drive
--            San Jose, CA  95134
--            USA
--    
--    Tel: +1 800 553-NETS
--    
--    E-mail: cs-switch-usage-mib@cisco.com
--  Descr
--    This MIB defines objects related to statistics 
--    for the usage of switch fabric. The switch fabric
--    is used by the incoming packets from the line/network
--    to a interface. Such packets are called ingress packets.
--    Counters are maintained for number of ingress packets/
--    octets switched by the switch fabric for each 
--    interface.
--    NOTE: These counters are not counting the total number 
--    of incoming packets and octets for a particular 
--    interface. Instead only the counts of packets and 
--    octets that actually use the switch-fabric are being
--    accounted for by this MIB.  Therefore, the counters in 
--    this MIB are distinctly different from packet and octet 
--    counters found in the IF-MIB.
--  RevDate
--    200105020000Z
--  RevDescr
--    Initial version of this MIB module.

ciscoSwitchUsageMIBObjects OBJECT IDENTIFIER ::= { ciscoSwitchUsageMIB 1 }
ciscoSwitchUsageStats OBJECT IDENTIFIER ::= { ciscoSwitchUsageMIBObjects 1 }
ciscoSwitchUsageMIBNotifyPrefix OBJECT IDENTIFIER ::= { ciscoSwitchUsageMIB 2 }
ciscoSwitchUsageMIBNotifications OBJECT IDENTIFIER ::= { ciscoSwitchUsageMIBNotifyPrefix 0 }
ciscoSwitchUsageMIBConformance OBJECT IDENTIFIER ::= { ciscoSwitchUsageMIB 3 }
ciscoSwitchUsageMIBCompliances OBJECT IDENTIFIER ::= { ciscoSwitchUsageMIBConformance 1 }
ciscoSwitchUsageMIBGroups OBJECT IDENTIFIER ::= { ciscoSwitchUsageMIBConformance 2 }

cswitchUsageStatTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CswitchUsageStatEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A list of switch resouce usage statistics 
        entries. The statistics will give information 
        on the switch usage by each interface."
    ::= { ciscoSwitchUsageStats 1 }

cswitchUsageStatEntry OBJECT-TYPE
    SYNTAX CswitchUsageStatEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Entry contains information of a particular 
        interface in terms of how much switch resource 
        it has used.
        An entry in this table exists for each ifEntry 
        with an ifType of fastEther(62) for FastEthernet
        interface and gigabitEthernet (117) for Gigabit
        interface."
    INDEX { ifIndex }
    ::= { cswitchUsageStatTable 1 }

CswitchUsageStatEntry ::= SEQUENCE {
    cswitchUsageByIngrsIntfPkts Counter,
    cswitchUsageByIngrsIntfHCPkts Counter,
    cswitchUsageByIngrsIntfOctets Counter,
    cswitchUsageByIngrsIntfHCOctets Counter
    }

cswitchUsageByIngrsIntfPkts OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of ingress packets of a interface 
        which use the switch resource."
    ::= { cswitchUsageStatEntry 1 }

cswitchUsageByIngrsIntfHCPkts OBJECT-TYPE
    SYNTAX --?? syntax is not convertable to SMIv1
           Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of ingress packets of a interface
        which use the switch resource.
        
        This is a 64 bit (High Capacity) version of
        the cswitchUsageByIngrsIntfPkts counter for
        use with SNMP v2c or v3 Managers."
    ::= { cswitchUsageStatEntry 2 }

cswitchUsageByIngrsIntfOctets OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of ingress octets of a interface 
        which use the switch resource."
    ::= { cswitchUsageStatEntry 3 }

cswitchUsageByIngrsIntfHCOctets OBJECT-TYPE
    SYNTAX --?? syntax is not convertable to SMIv1
           Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of ingress octets of a interface
        which use the switch resource.
        This is a 64 bit (High Capacity) version of
        the cswitchUsageByIngrsIntfOctets counter for
        use with SNMP v2c or v3 Managers."
    ::= { cswitchUsageStatEntry 4 }

ciscoSwitchUsageMIBGroup OBJECT IDENTIFIER ::= { ciscoSwitchUsageMIBGroups 1 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    The Object Group for switch usage statistics
--  objects
--    cswitchUsageByIngrsIntfPkts, cswitchUsageByIngrsIntfHCPkts, 
--    cswitchUsageByIngrsIntfOctets, 
--    cswitchUsageByIngrsIntfHCOctets

ciscoSwitchUsageMIBCompliance OBJECT IDENTIFIER ::= { ciscoSwitchUsageMIBCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    The compliance statement for the switch usage 
--    statistics group.
--  Module
--    >>current<<
--   MandGroup
--    ciscoSwitchUsageMIBGroup


END