-- MIB file created 09-Jun-2015 13:22:07, by
--   SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com

CISCO-TC DEFINITIONS ::= BEGIN

-- From file: "CISCO-TC.my"
-- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T"

IMPORTS
    ciscoModules
            FROM CISCO-SMI
    Gauge, Counter
            FROM RFC1155-SMI;

ciscoTextualConventions OBJECT IDENTIFIER ::= { ciscoModules 1 }
-- MODULE-IDENTITY
--  LastUpdated
--    201506090000Z
--  OrgName
--    Cisco Systems, Inc.
--  ContactInfo
--    Cisco Systems
--    Customer Service
--    
--    Postal: 170 W Tasman Drive
--    San Jose, CA  95134
--    USA
--    
--    Tel: +1 800 553-NETS
--    
--    E-mail: cs-snmp@cisco.com
--  Descr
--    This module defines textual conventions used throughout
--    cisco enterprise mibs.
--  RevDate
--    201506090000Z
--  RevDescr
--    Added the following enumerations for IfOperStatusReason:
--    physicalPortHotStandBy,
--    wimaxModemUnattached,
--    wpanModemUnattached,
--    rbhModulo,
--    fpcMinLinkNotMet,
--    misCabling,
--    rcvSrpOnNonFcoeFex,
--    acessPortOnBd,
--    lacpMisConfig,
--    fortyGMemberPort,
--    goldLoopBackTest,
--    edpError,
--    vpcCompCheckFailed,
--    aclQosNoResource,
--    vpcShutdown,
--    notPcMember,
--    systemIntfShut,
--    speedGroupConfigMisMatch,
--    dot1qMisConfig,
--    mdMisMatch,
--    vpcPeerLinkShut,
--    notAvailable
--  RevDate
--    201407230000Z
--  RevDescr
--    -Added the textual-convention CiscoAbsZeroBasedCounter64.
--  RevDate
--    201208060000Z
--  RevDescr
--    -Added the following enums for IfOperStatusReason:
--    ficonNoPortSwapLogicalPort,
--    ficonInvalidPortNum,
--    remotePortInL2vpnDown,
--    suspendedDueToNoLacpPdus,
--    fcotValidationFailedAtDriver,
--    unsupportedTransceiverMd5DigestNotSame,
--    unsupportedTransceiver,
--    adminStateConfigChange,
--    vlanAllowedList,
--    vlanAllowedListOverride,
--    vlanAllowedListAdd,
--    vlanAllowedRemove,
--    vlanCfgStateChange,
--    vlanCfgDelete,
--    pppPeerNotResponding,
--    pppAuthFailed,
--    xcvrAuthFailed,
--    badFramesRcvdFromLink
--  RevDate
--    201202010000Z
--  RevDescr
--    Added CiscoVlanIndex TC.
--  RevDate
--    201111110000Z
--  RevDescr
--    Added CiscoEntityIndexList TC.
--  RevDate
--    201106170000Z
--  RevDescr
--    -Added the following enums for FcIfOperStatusReason:
--    fcRedirectIsolation,
--    portActLicenseNotAvailable,
--    sdmIsolation,
--    fcidAllocationFailed,
--    unavailableNPVUpstreamPort,
--    unavailableNPVPrefUpstreamPort,
--    sfpReadError,
--    stickyDownOnLinkFailure,
--    tooManyLinkFlapsErr,
--    unidirectionalUDLD,
--    txRxLoopUDLD,
--    neighborMismatchUDLD,
--    authzPending,
--    hotStdbyInBundle,
--    incompleteConfig,
--    incompleteTunnelCfg,
--    hwProgrammingFailed,
--    tunnelDstUnreachable,
--    suspendByMtu,
--    sfpInvalid,
--    sfpAbsent,
--    portCapabilitiesUnknown,
--    channelErrDisabled,
--    vrfMismatch,
--    vrfForwardReferencing,
--    dupTunnelConfigDetected,
--    primaryVLANDown,
--    vrfUnusable,
--    errDisableHandShkFailure,
--    errDisabledBPDUGuard,
--    dot1xSecViolationErrDisabled,
--    emptyEchoUDLD,
--    vfTaggingCapErr,
--    portDisabled,
--    tunnelModeNotConfigured,
--    tunnelSrcNotConfigured,
--    tunnelDstNotConfigured,
--    tunnelUnableToResolveSrcIP
--    tunnelUnableToResolveDstIP,
--    tunnelVrfDown,
--    sifAdminDown,
--    phyIntfDown,
--    ifSifLimitExceeded,
--    sifHoldDown,
--    noFcoe,
--    dcxCompatMismatch,
--    isolateBundleLimitExceeded,
--    sifNotBound,
--    errDisabledLacpMiscfg,
--    satFabricIfDown,
--    invalidSatFabricIf,
--    noRemoteChassis,
--    vicEnableNotReceived,
--    vicDisableReceived,
--    vlanVsanMappingNotEnabled,
--    stpNotFwdingInFcoeMappedVlan,
--    moduleOffline,
--    udldAggModeLinkFailure,
--    stpInconsVpcPeerDisabled,
--    setPortStateFailed,
--    suspendedByVpc,
--    vpcCfgInProgress,
--    vpcPeerLinkDown,
--    vpcNoRspFromPeer,
--    protoPortSuspend,
--    tunnelSrcDown,
--    cdpInfoUnavailable,
--    fexSfpInvalid,
--    errDisabledIpConflict,
--    fcotClkRateMismatch,
--    portGuardTrustSecViolation,
--    sdpTimeout,
--    satIncompatTopo,
--    waitForFlogi,
--    satNotConfigured,
--    npivNotEnabledInUpstream,
--    vsanMismatchWithUpstreamSwPort,
--    portGuardBitErrRate,
--    portGuardSigLoss,
--    portGuardSyncLoss,
--    portGuardLinkReset,
--    portGuardCreditLoss,
--    bitErrorRate,
--    signalLoss,
--    syncLoss,
--    linkReset,
--    creditLoss,
--    ipQosMgrPolicyAppFailure,
--    pauseRateLimitErrDisabled,
--    lstGrpUplinkDown,
--    stickyDnLinkFailure,
--    routerMacFailure,
--    dcxMultipleMsapIds,
--    dcxHundredPdusRcvdNoAck,
--    enmSatIncompatibleUplink,
--    enmLoopDetected,
--    nonStickyExternallyDisabled,
--    subGroupIdNotAssigned,
--    vemUnlicensed,
--    profileNotFound,
--    nonExistentVlan,
--    vlanInvalidType,
--    vlanDown,
--    vpcPeerUpgrade,
--    ipQosDcbxpCompatFailure,
--    nonCiscoHbaVfTag,
--    domainIdConfigMismatch,
--    sfpSpeedMismatch,
--    xcvrInitializing,
--    xcvrAbsent,
--    xcvrInvalid,
--    vfcBindingInvalid,
--    vlanNotFcoeEnabled,
--    pvlanNativeVlanErr,
--    ethL2VlanDown,
--    ethIntfInvalidBinding,
--    pmonFailure,
--    l3NotReady,
--    speedMismatch,
--    flowControlMismatch,
--    vdcMode,
--    suspendedDueToMinLinks,
--    enmPinFailLinkDown,
--    inactiveM1PortFpathActiveVlan,
--    parentPortDown,
--    moduleRemoved,
--    corePortMct,
--    nonCorePortMct,
--    ficonInorderNotActive,
--    invalidEncapsulation,
--    modemLineDeasserted,
--    ipSecHndshkInProgress,
--    sfpEthCompliantErr,
--    cellularModemUnattached,
--    outOfGlblRxBuffers,
--    sfpFcCompliantErr,
--    ethIntfNotLicensed,
--    domainIdsInvalid,
--    fabricNameInvalid.
--  RevDate
--    201002240000Z
--  RevDescr
--    Added CiscoURLStringOrEmpty textual convention.
--  RevDate
--    200906180000Z
--  RevDescr
--    Added the new textual convention CiscoVrfName
--  RevDate
--    200903100000Z
--  RevDescr
--    Added the new textual convention CiscoInterfaceIndexList
--  RevDate
--    200902260000Z
--  RevDescr
--    Added the new textual convention Cisco2KVlanList
--  RevDate
--    200804020000Z
--  RevDescr
--    Added the new textual convention CiscoBridgeDomain.
--  RevDate
--    200702150000Z
--  RevDescr
--    Added following textual conventions:
--    CiscoVlanList,
--    CiscoCosList, 
--    CiscoPbbServiceIdentifier
--  RevDate
--    200607060000Z
--  RevDescr
--    Added the following enums to IfOperStatusReason:
--    - elpFailureAllZeroPeerWWNRcvd,
--    - preferredPathIsolation.
--  RevDate
--    200604130000Z
--  RevDescr
--    Added enumeration to IfOperStatusReason from 113-131
--    ('dpvmVsanSuspended' to 'domainOther').
--  RevDate
--    200506240000Z
--  RevDescr
--    Added CvE164Address textual convention.
--  RevDate
--    200506160000Z
--  RevDescr
--    Added following textual conventions:
--    CiscoURLString
--    CiscoHTTPResponseStatusCode
--    EntLogicalIndexOrZero.
--  RevDate
--    200410110000Z
--  RevDescr
--    Added IfOperStatusReason textual convention.
--  RevDate
--    200406080000Z
--  RevDescr
--    Added CiscoPortListRange textual convention.
--  RevDate
--    200404140000Z
--  RevDescr
--    Added CiscoPortList textual convention.
--    Removed Unsigned32 textual convention.
--  RevDate
--    200212180000Z
--  RevDescr
--    Changed MilliSeconds TC to CiscoMilliSeconds as it was
--    overlapping with the one in a standard MIB.
--  RevDate
--    200212121600Z
--  RevDescr
--    Added the 'http' enumeration to CiscoNetworkProtocol.
--  RevDate
--    200212020000Z
--  RevDescr
--    Added Unsigned64 textual convention.
--  RevDate
--    200209220000Z
--  RevDescr
--    Added ListIndex, ListIndexOrZero, TimeIntervalSec,
--    TimeintervalMin, MicroSeconds and MicroSeconds TC from 
--    Andiamo's TC MIB .
--  RevDate
--    200209170000Z
--  RevDescr
--    Added ConfigIterator & BulkConfigResult textual
--    convention for bulk provisioning.
--    Added CountryCodeITU textual convention for ITU-T defined
--    country codes for non-standard facilities.
--  RevDate
--    200204160000Z
--  RevDescr
--    Added PerfHighIntervalCount TEXTUAL-CONVENTION.
--  RevDate
--    200107070000Z
--  RevDescr
--    Added enumerations to CiscoNetworkProtocol
--  RevDate
--    200101180000Z
--  RevDescr
--    Added CiscoAlarmSeverity textual convention.
--    Changed SAPType display hint to d.  Changed
--    INTEGER to Integer32 in CiscoPort and
--    CiscoIpProtocol TCs.  Changed SnmpAdminString
--    to OCTET STRING in CiscoLocationSpecifier.
--    Removed IMPORTs for ciscoProducts and
--    SnmpAdminString.
--  RevDate
--    200011210000Z
--  RevDescr
--    Added CiscoLocationClass, CiscoLocationSpecifier
--    CiscoInetAddressMask, CiscoAbsZeroBasedCounter32, 
--    CiscoSnapShotAbsCounter32 textual conventions.
--  RevDate
--    9810280000Z
--  RevDescr
--    Added CiscoRowOperStatus, EntPhysicalIndexOrZero,
--    Port and IpProtocol textual conventions.
--  RevDate
--    9703130000Z
--  RevDescr
--    Added SAPType, CountryCode textual convention.
--  RevDate
--    9608140000Z
--  RevDescr
--    Added InterfaceIndexOrZero textual convention.
--  RevDate
--    9607080000Z
--  RevDescr
--    Added new CiscoNetworkProtocol enumerations.
--  RevDate
--    9602220000Z
--  RevDescr
--    Added Unsigned32 textual conventions.
--  RevDate
--    9506070000Z
--  RevDescr
--    Miscellaneous updates/corrections, including making
--    CiscoNetworkProtocol enumerations contiguous.

Layer2Cos ::= INTEGER(0..7)
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    An integer that is in the range of the layer 2 CoS values. It
--    corresponds to the IEEE 802.1P CoS value which defines eight
--    (2^3) user priority levels.
--    Note: the IEEE 802.1P has been merged into IEEE 802.1D.
--  Refer
--    IEEE 802.1D, 2004 Edition, Annex G User priorities and traffic
--        classes.

CiscoNetworkProtocol ::= INTEGER {
        ip(1),
        decnet(2),
        pup(3),
        chaos(4),
        xns(5),
        x121(6),
        appletalk(7),
        clns(8),
        lat(9),
        vines(10),
        cons(11),
        apollo(12),
        stun(13),
        novell(14),
        qllc(15),
        snapshot(16),
        atmIlmi(17),
        bstun(18),
        x25pvc(19),
        ipv6(20),
        cdm(21),
        nbf(22),
        bpxIgx(23),
        clnsPfx(24),
        http(25),
        unknown(65535)
        }
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    Represents the different types of network layer protocols.

CiscoNetworkAddress ::= OCTET STRING
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    Represents a network layer address.  The length and format of
--    the address is protocol dependent as follows:
--    ip        4 octets
--    decnet    2 octets
--    pup       obsolete
--    chaos     2 octets
--    xns       10 octets
--              first 4 octets are the net number
--              last 6 octets are the host number
--    x121    
--    appletalk 3 octets
--              first 2 octets are the net number
--              last octet is the host number
--    clns
--    lat
--    vines     6 octets
--              first 4 octets are the net number
--              last 2 octets are the host number
--    cons
--    apollo    10 octets
--              first 4 octets are the net number
--              last 6 octets are the host number
--    stun      8 octets
--    novell    10 octets
--              first 4 octets are the net number
--              last 6 octets are the host number
--    qllc      6 octets
--    bstun     1 octet - bi-sync serial tunnel 
--    snapshot  1 octet
--    atmIlmi   4 octets
--    x25 pvc   2 octets (12 bits)
--    ipv6      16 octets
--    cdm
--    nbf
--    bgpIgx
--    clnsPfx  upto 20 octets
--    http     upto 70 octets
--             first 4 octets are the IPv4 host 
--             address
--             next 2 octets are the TCP port 
--             number
--             remaining(1 upto 64) octets are 
--             the URI

Unsigned64 ::= --?? syntax is not convertable to SMIv1
        Counter
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    An unsigned 64 bit integer. We use SYNTAX Counter for the
--    encoding rules.

InterfaceIndexOrZero ::= INTEGER(0..2147483647)
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    Either the value 0, or the ifIndex value of an
--    interface in the ifTable.

SAPType ::= INTEGER(0..254)
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    Service Access Point - is a term that denotes the means
--    by which a user entity in layer n+1 accesses a service
--    of a provider entity in layer n.

CountryCode ::= OCTET STRING(SIZE(0|2))
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    Represents a case-insensitive 2-letter country code taken
--    from ISO-3166. Unrecognized countries are represented as 
--    empty string.

CountryCodeITU ::= Gauge(0..255)
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    This textual convention represents a country or area code for
--    non-standard facilities in telematic services.
--  Refer
--    ITU-T T.35 - Section 3.1 Country Code

EntPhysicalIndexOrZero ::= INTEGER(0..2147483647)
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    This textual convention is an extension of entPhysicalIndex.
--    If non-zero, the object is an entPhysicalIndex. If zero, no
--    appropriate entPhysicalIndex exists. Any additional semantics
--    are object specific.

CiscoRowOperStatus ::= INTEGER {
        active(1),
        activeDependencies(2),
        inactiveDependency(3),
        missingDependency(4)
        }
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    Represents the operational status of an table entry.
--    This textual convention allows explicitly representing
--    the states of rows dependent on rows in other tables.
--    
--    active(1) -
--        Indicates this entry's RowStatus is active
--        and the RowStatus for each dependency is active.
--    
--    activeDependencies(2) -
--        Indicates that the RowStatus for each dependency
--        is active, but the entry's RowStatus is not active.
--    
--    inactiveDependency(3) -
--        Indicates that the RowStatus for at least one
--        dependency is not active.
--    
--    missingDependency(4) -
--        Indicates that at least one dependency does
--        not exist in it's table.

CiscoPort ::= INTEGER(0..65535)
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    The TCP or UDP port number range.
--  Refer
--    Transmission Control Protocol. J. Postel. RFC793,
--        User Datagram Protocol. J. Postel. RFC768

CiscoIpProtocol ::= INTEGER(0..255)
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    IP protocol number range.
--  Refer
--    Internet Protocol. J. Postel. RFC791

CiscoLocationClass ::= INTEGER {
        chassis(1),
        shelf(2),
        slot(3),
        subSlot(4),
        port(5),
        subPort(6),
        channel(7),
        subChannel(8)
        }
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    An enumerated value which provides an indication of
--    the general location type of a particular physical and/or
--    logical interface.
--    chassis - a system framework for mounting one or more 
--              shelves/slots/cards.
--    shelf - a cabinet that holds one or more slots.
--    slot -  card or subSlot holder.
--    subSlot - daughter-card holder.
--    port - a physical port (e.g., a DS1 or DS3 physical port).
--    subPort - a logical port on a physical port (e.g., a DS1 
--              subPort on a DS3 physical port).
--    channel - a logical interface (e.g., a DS0 channel, signaling
--              channel, ATM port, other virtual interfaces).
--    subChannel - a sub-channel on a logical interface.

CiscoLocationSpecifier ::= OCTET STRING(SIZE(0..255))
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    Use this TC to define objects that indicate the
--    physical entity and/or logical interface location 
--    of a managed entity on a managed device. In SNMP, a 
--    standard mechanism for indicating the physical location
--    of entities is via the ENTITY-MIB. However, that approach
--    is not satisfactory in some cases because:
--    
--    1. The entity requiring a location-based naming may be 
--       associated with an entity which can not be represented 
--       as a physical entity in the ENTITY-MIB,
--    2. NMS applications may desire a more direct 
--       name/representation of a physical entity than is 
--       available via the ENTITY-MIB, e.g., a physical entity
--       which is named via a hierarchy of levels in the ENTITY-MIB.
--    
--    The value of an object defined using this TC is an ASCII 
--    string consisting of zero or more elements separated by 
--    commas. Each element is of the form  = . 
--    
--    An example of this syntax is 'slot=5,port=3'.
--    
--    The syntax of the string is formally specified using
--    ABNF notation (with one exception, noted below), as
--    follows:                 
--    
--    location-specifier =  elem *(',' elem) 
--                   ; subject to 
--                   ; size restriction specified in the SYNTAX
--                   ; clause below
--    
--    elem    =   loctype '=' number
--    
--    number  = %x00-FFFFFFFF / %d0-4294967295
--    
--    loctype = 1*32VCHAR 
--    
--    It is recommended that loctype use one of the enumerated
--    labels defined for CiscoLocationClass.
--    
--    (NOTE: To conform to ABNF notation as defined in RFC2234, 
--     substitute the single-quote symbol with a double-quote 
--     symbol in the above rules.)
--    
--    A zero length of CiscoLocationSpecifier is object-specific
--    and must be defined as part of the description of any object
--    which uses this syntax.
--  Refer
--    RFC2234, Augmented BNF for syntax specifications: ABNF

CiscoInetAddressMask ::= Gauge(0..128)
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    Denotes a generic Internet subnet address mask.
--    The Internet subnet address mask is represented as the
--    number of contiguous 1-bit from MSB (most significant bit)
--    of the Internet subnet address mask.
--    A CiscoInetAddressMask value is always interpreted within
--    the context of an InetAddressType value. The 
--    InetAddressType only object or InetAddressType with
--    InetAddress objects which define the context must be
--    registered immediately before the object which uses the
--    CiscoInetAddressMask textual convention.  In other words,
--    the object identifiers for the InetAddressType object and
--    the CiscoInetAddressMask object MUST have the same length
--    and the last sub-identifier of the InetAddressType object
--    MUST be 1 less than the last sub-identifier of the 
--    CiscoInetAddressMask object and MUST be 2 less than the
--    last sub-identifier of the CiscoInetAddressMask object if
--    an InetAddress object is defined between InetAddressType
--    and CiscoInetAddressMask objects.
--    The maximum value of the CiscoInetAddressMask TC is 32 for
--    the value 'ipv4(1)' in InetAddressType object and 128 for
--    the value 'ipv6(2)' in InetAddressType object.
--    The value zero is object-specific and must therefore be
--    defined as part of the description of any object which
--    uses this syntax.  Examples of the usage of zero might
--    include situations where Internet subnet mask was unknown,
--    or when none subnet masks need to be referenced.
--  Refer
--    RFC2851, Textual Conventions for Internet Network Addresses.

CiscoAbsZeroBasedCounter32 ::= Gauge
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    This TC describes an object which counts events with the
--    following semantics: objects of this type will be set to
--    zero(0) on creation and will thereafter count appropriate
--    events, it locks at the maximum value of 4,294,967,295 if
--    the counter overflows.
--    This TC may be used only in situations where wrapping is
--    not possible or extremely unlikely situation.

CiscoSnapShotAbsCounter32 ::= Gauge
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    This TC describes an object which stores a snap-shot value
--    with the following semantics: objects of this type will
--    take a snap-shot value from their associated
--    CiscoAbsZeroBasedCounter32 type objects on creation.

CiscoAlarmSeverity ::= INTEGER {
        cleared(1),
        indeterminate(2),
        critical(3),
        major(4),
        minor(5),
        warning(6),
        info(7)
        }
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    Represents the perceived alarm severity associated
--    with a service or safety affecting condition and/or
--    event.  These are based on ITU severities, except
--    that info(7) is added.
--    
--        cleared(1) -
--            Indicates a previous alarm condition has been
--            cleared.  It is not required (unless specifically
--            stated elsewhere on a case by case basis) that an
--            alarm condition that has been cleared will produce
--            a notification or other event containing an
--            alarm severity with this value.
--    
--        indeterminate(2) -
--            Indicates that the severity level cannot be
--            determined. 
--    
--        critical(3) -
--            Indicates that a service or safety affecting
--            condition has occurred and an immediate
--            corrective action is required.
--    
--        major(4) -
--            Indicates that a service affecting condition has
--            occurred and an urgent corrective action is
--            required.
--    
--        minor(5) -
--            Indicates the existence of a non-service affecting
--            condition and that corrective action should be
--            taken in order to prevent a more serious (for
--            example, service or safety affecting) condition.
--    
--        warning(6) -
--            Indicates the detection of a potential or impending
--            service or safety affecting condition, before any
--            significant effects have been felt.
--    
--        info(7) -
--            Indicates an alarm condition that does not
--            meet any other severity definition.  This can
--            include important, but non-urgent, notices or
--            informational events.
--  Refer
--    ITU-X.733

PerfHighIntervalCount ::= --?? syntax is not convertable to SMIv1
        Counter
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    A 64 bit counter associated with a
--    performance measurement in a previous
--    15 minute measurement interval. In the
--    case where the agent has no valid data
--    available for a particular interval the
--    corresponding object instance is not
--    available and upon a retrieval request
--    a corresponding error message shall be
--    returned to indicate that this instance
--    does not exist (for example, a noSuchName
--    error for SNMPv1 and a noSuchInstance for
--    SNMPv2 GET operation).
--    In a system supporting
--    a history of n intervals with
--    IntervalCount(1) and IntervalCount(n) the
--    most and least recent intervals
--    respectively, the following applies at
--    the end of a 15 minute interval:
--        - discard the value of IntervalCount(n)
--        - the value of IntervalCount(i) becomes that
--          of IntervalCount(i-1) for n >= i > 1
--        - the value of IntervalCount(1) becomes that
--          of CurrentCount
--        - the TotalCount, if supported, is adjusted.
--    
--    This definition is based on CounterBasedGauge64 TEXTUAL
--    CONVENTION  defined in RFC2856. The PerfHighIntervalCount
--    type represents a non-negative
--    integer, which may increase or decrease, but shall never
--    exceed a maximum value, nor fall below a minimum value. The
--    maximum value can not be greater than 2^64-1
--    (18446744073709551615 decimal), and the minimum value can
--    not be smaller than 0.  The value of a PerfHighIntervalCount,
--    has its maximum value whenever the information being modeled
--    is greater than or equal to its maximum value, and has its
--    minimum value whenever the information being modeled is
--    smaller than or equal to its minimum value.  If the
--    information being modeled subsequently decreases below
--    (increases above) the maximum (minimum) value, the
--    PerfHighIntervalCount also decreases (increases).
--    
--    Note that this TC is not strictly supported in SMIv2,
--    because the 'always increasing' and 'counter wrap' semantics
--    associated with the Counter base type are not preserved.
--    It is possible that management applications which rely
--    solely upon the (Counter64) ASN.1 tag to determine object
--    semantics will mistakenly operate upon objects of this type
--    as they would for Counter objects.
--    
--    This textual convention represents a limited and short-term
--    solution, and may be deprecated as a long term solution is
--    defined and deployed to replace it.
--  Refer
--    RFC 2856(HCNUM-TC MIB).
--        RFC 2493(PerfHist-TC-MIB).

ConfigIterator ::= Gauge(1..4294967295)
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    This object type is a control object type which applies to
--    writable objects in the same SNMP PDU related to the
--    same table containing those objects. It controls an 
--    operation which repeatedly applies the specified 
--    configuration data to more than one rows in a table. 
--    The operation starts from the row specified by the index 
--    of the instance and repeats for the number of rows as 
--    the value of the object. 
--    
--    ConfigIterator object needs to be accompanied by one set of
--    writable objects which are of the same instance to apply to.
--    
--    For example, a SNMP PDU contains 
--       { objectA.10 = 1, 
--         objectB.10 = 'E1',
--         objectC.10 = 44,
--         objectRepetition.10 = 100 }
--    
--    The SYNTAX of objectRepetition is ConfigIterator.
--    This will apply value 1 to objectA, value 'E1' to objectB,
--    value 44 to objectC in the table starting from row 10 
--    repeatedly for 100 rows.
--    
--    The iteration is based on the number of rows, not based on
--    the value of the index. For sparse tables, the index 10, 
--    20, 30, 110, and 120 counts for 5 rows, the operation will 
--    go beyond index 100 in the previous SNMP PDU example.
--    
--    The iteration will stop prematurely when it comes to the 
--    following situations:
--    (1) When the number of the rows in the table is less than
--        the designated row indicated by the ConfigIterator 
--        object. 
--    (2) When it encounters the first error in any row, the 
--        operation won't continue to next row.
--    
--    The operation of ConfigIterator object applies only to
--    the writable objects having the same index as the
--    ConfigIterator object in one SNMP PDU.
--    
--    For example, a SNMP PDU contains
--       { objectD.5 = 38,
--         objectE.6 = 'T1',
--         objectF.5 = 'false',
--         objectIterator.5 = 10 }
--    
--    The SYNTAX of objectIterator is ConfigIterator.
--    This will apply value 38 to objectD, value 'false' to 
--    objectF in the table starting from row 5 repeatedly 
--    for 10 rows. Since the object objectE.6 has different
--    index (6) from the index of objectIterator, the 
--    repetition won't be applied to it. However the value 
--    of objectE in the row 6 will be set to 'T1' according
--    to regular SNMP SET orperation. 
--    
--    If there is row overlapping of the iteration in a SNMP PDU,
--    it will be operated as they are in two different SNMP PDUs.
--    
--    For example, a SNMP PDU contains
--       { objectD.5 = 38,
--         objectD.6 = 40,
--         objectE.6 = 'T1',
--         objectF.5 = 'false',
--         objectIterator.5 = 10
--         objectIterator.6 = 10 }
--    
--    This will apply value 38 to objectD, value 'false' to 
--    objectF starting from row 5 repeatedly for 10 rows, and
--    apply value 40 to objectD, value 'T1' to objectE starting
--    from row 6 repeatedly for 10 rows. The final value of 
--    objectD.6 can be 38 or 40, it depends on the SNMP stack of
--    the system starts SNMP SET for the row 5 before the row 6 
--    or the other way around.
--    
--    The object defined as ConfigIterator will be set to value 1 
--    after the iteration operation is kick-off regardless the 
--    system has completed the operation to the designated rows 
--    or not. Therefore retrieving the value of this object 
--    is meaningless. It acts as the one time operation for 
--    bulk configuration.
--    
--    The object defined as ConfigIterator has no meaning by itself,
--    it has to be combined with one or more than one writable 
--    objects from the same table and within the same SNMP PDU
--    for the repetition operation.
--    
--    For example, a SNMP PDU contains
--       { objectG.2 = 49,
--         objectH.2 = 'AE'h
--         objectIterator.4 = 20 }
--    
--    The SYNTAX of objectIterator is ConfigIterator. Since
--    there are no objects having the same index as the index
--    of objectIterator in the PDU, the result of this SNMP 
--    operation will set value 49 to objectG and value 0xAE 
--    to objectH of the row 2 only as regular SNMP SET operation.
--    
--    The index of the instance indicates the starting row for the
--    iteration. 
--    The order of the iteration depends, for instance, on: 
--    (1) physical hardware position, or
--    (2) logical index.
--    
--    It depends on the characters of the table which contains
--    the ConfigIterator object.
--    
--    Iteration can be done through some or all the components
--    of the index for a table. The description of the iterator
--    object in that table should describe which part of the 
--    index the iteration is applied to.
--    
--    The operation for this object type is based on the best
--    effort. When the agent receives a SNMP PDU containing this 
--    data type, the return status of the SNMP request reflects 
--    only the result of the SET operation has applied to the 
--    starting row. It may return a SNMP response with SUCCESS 
--    status regardless the number of rows for the data actually 
--    been deployed later on. Therefore it is possible the data 
--    might not be completely deployed to the number of rows
--    designated by the ConfigIterator and the operation stops 
--    prematurely due to an error it first encounters after 
--    n rows (n < the value of ConfigIterator object).
--    
--    Usually the error report mechanism for this type of operation
--    is accomplished by combining this type of object with the
--    other two objects in the same table:
--    
--    (1) An OwnerString object
--    (2) An object indicates the result of the operation.
--    
--    When issuing this bulk configuration request, the SNMP 
--    manager should provide its identifier in (1) object.
--    After issuing the request, it should check the value of (1) 
--    object if it is the same with it own name.
--    If they are the same, then the value of the object presents
--    in (2) is the result from the previous operation from this
--    manager. Otherwise, another SNMP manager might issue
--    the bulk configuration to the same table before the previous
--    bulk operation has been completed. These two objects will 
--    represent the last bulk operation in the table.

BulkConfigResult ::= OCTET STRING(SIZE(0..255))
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    This textual convention defines the format of the
--    displayable textual result from the bulk configuration
--    operation specified as ConfigIterator type.
--    
--    The format should be: 
--    'COMPLETION=          error occured>/,
--     ERROR=/:
--     '
--    
--    For example:
--    'COMPLETION=22/100,ERROR=38/44:Invalid Ds1 line coding 
--     for the line type'

ListIndex ::= INTEGER(1..2147483647)
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    A unique value greater than zero, for each of the
--    list that is defined. The object using this 
--    convention should give all the object specific 
--    details including the list type.

ListIndexOrZero ::= INTEGER(0..2147483647)
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    This textual convention is an extension of the
--    ListIndex. In addition to the ListIndex range, 
--    this also includes 0 in its range of values. 
--    This value could be object specific and 
--    should be given the description of that object. 
--    In most cases, a value 0 means that the it does 
--    not represent any lists.

TimeIntervalSec ::= Gauge
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    A period of time, measured in units of 1 second.

TimeIntervalMin ::= Gauge
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    A period of time, measured in units of 1 minute.

CiscoMilliSeconds ::= Gauge
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    Represents time unit value in milliseconds.

MicroSeconds ::= Gauge
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    Represents time unit value in microseconds.

CiscoPortList ::= OCTET STRING(SIZE(0..256))
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    Each octet within this value specifies a set of eight
--    ports. The object defined by this textual convention
--    can specify a port range of 2k ports in its description.
--    Example: 1 - 2048, 2049 - 4096, etc. The first octet 
--    represents the first 8 ports of the range of ports
--    specified by the object, the second octet represents 
--    the next 8 ports, etc. When a port range is not
--    specified, a default port range of '1 - 2048' is assumed.
--    
--    Within each octet, the most significant bit represents
--    the lowest numbered port, and the least significant bit
--    represents the highest numbered port. Thus, each port
--    of the bridge is represented by a single bit within the
--    value of this object.  If that bit has a value of '1'
--    then that port is included in the set of ports; the port
--    is not included if its bit has a value of '0'.
--    
--    Note that if the length of this string is less than
--    256 octets, any 'missing' octets are assumed to contain
--    the value zero. An NMS may omit any zero-valued octets
--    from the end of this string in order to reduce SetPDU size,
--    and the agent may also omit zero-valued trailing octets,
--    to reduce the size of GetResponse PDUs.

CiscoPortListRange ::= INTEGER {
        oneto2k(1),
        twoKto4K(2),
        fourKto6K(3),
        sixKto8K(4),
        eightKto10K(5),
        tenKto12K(6),
        twelveKto14K(7),
        fourteenKto16K(8)
        }
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    Indicates the port range.
--    
--    oneto2K(1) indicates that the port number range is
--    from 1 to 2048.
--    
--    twoKto4K(2) indicates that the port number range is
--    from 2049 to 4096.
--    
--    fourKto6K(3) indicates that the port number range is
--    from 4097 to 6144.
--    
--    sixKto8K(4) indicates that the port number range is
--    from 6145 to 8192.
--    
--    eightKto10K(5) indicates that the port number range is
--    from 8193 to 10240.
--    
--    tenKto12K(6) indicates that the port number range is
--    from 10241 to 12288.
--    
--    twelveKto14K(7) indicates that the port number range is
--    from 12289 to 14336.
--    
--    fourteenKto16K(8) indicates that the port number range is
--    from 14337 to 16384.
--    
--    When an object is defined with this textual convention,
--    it must be accompanied by an object of CiscoPortList
--    syntax.

IfOperStatusReason ::= INTEGER {
        other(1),
        none(2),
        hwFailure(3),
        loopbackDiagFailure(4),
        errorDisabled(5),
        swFailure(6),
        linkFailure(7),
        offline(8),
        nonParticipating(9),
        initializing(10),
        vsanInactive(11),
        adminDown(12),
        channelAdminDown(13),
        channelOperSuspended(14),
        channelConfigurationInProgress(15),
        rcfInProgress(16),
        elpFailureIsolation(17),
        escFailureIsolation(18),
        domainOverlapIsolation(19),
        domainAddrAssignFailureIsolation(20),
        domainOtherSideEportIsolation(21),
        domainInvalidRcfReceived(22),
        domainManagerDisabled(23),
        zoneMergeFailureIsolation(24),
        vsanMismatchIsolation(25),
        parentDown(26),
        srcPortNotBound(27),
        interfaceRemoved(28),
        fcotNotPresent(29),
        fcotVendorNotSupported(30),
        incompatibleAdminMode(31),
        incompatibleAdminSpeed(32),
        suspendedByMode(33),
        suspendedBySpeed(34),
        suspendedByWWN(35),
        domainMaxReTxFailure(36),
        eppFailure(37),
        portVsanMismatchIsolation(38),
        loopbackIsolation(39),
        upgradeInProgress(40),
        incompatibleAdminRxBbCredit(41),
        incompatibleAdminRxBufferSize(42),
        portChannelMembersDown(43),
        zoneRemoteNoRespIsolation(44),
        firstPortUpAsEport(45),
        firstPortNotUp(46),
        peerFCIPPortClosedConnection(47),
        peerFCIPPortResetConnection(48),
        fcipPortMaxReTx(49),
        fcipPortKeepAliveTimerExpire(50),
        fcipPortPersistTimerExpire(51),
        fcipPortSrcLinkDown(52),
        fcipPortSrcAdminDown(53),
        fcipPortAdminCfgChange(54),
        fcipSrcPortRemoved(55),
        fcipSrcModuleNotOnline(56),
        invalidConfig(57),
        portBindFailure(58),
        portFabricBindFailure(59),
        noCommonVsanIsolation(60),
        ficonVsanDown(61),
        invalidAttachment(62),
        portBlocked(63),
        incomAdminRxBbCreditPerBuf(64),
        tooManyInvalidFlogis(65),
        deniedDueToPortBinding(66),
        elpFailureRevMismatch(67),
        elpFailureClassFParamErr(68),
        elpFailureClassNParamErr(69),
        elpFailureUnknownFlowCtlCode(70),
        elpFailureInvalidFlowCtlParam(71),
        elpFailureInvalidPortName(72),
        elpFailureInvalidSwitchName(73),
        elpFailureRatovEdtovMismatch(74),
        elpFailureLoopbackDetected(75),
        elpFailureInvalidTxBbCredit(76),
        elpFailureInvalidPayloadSize(77),
        bundleMisCfg(78),
        bitErrRuntimeThreshExceeded(79),
        linkFailLinkReset(80),
        linkFailPortInitFail(81),
        linkFailPortUnusable(82),
        linkFailLossOfSignal(83),
        linkFailLossOfSync(84),
        linkFailNosRcvd(85),
        linkFailOLSRcvd(86),
        linkFailDebounceTimeout(87),
        linkFailLrRcvd(88),
        linkFailCreditLoss(89),
        linkFailRxQOverflow(90),
        linkFailTooManyInterrupts(91),
        linkFailLipRcvdBb(92),
        linkFailBbCreditLoss(93),
        linkFailOpenPrimSignalTimeout(94),
        linkFailOpenPrimSignalReturned(95),
        linkFailLipF8Rcvd(96),
        linkFailLineCardPortShutdown(97),
        fcspAuthenfailure(98),
        fcotChecksumError(99),
        ohmsExtLoopbackTest(100),
        invalidFabricBindExchange(101),
        tovMismatch(102),
        ficonNotEnabled(103),
        ficonNoPortNumber(104),
        ficonBeingEnabled(105),
        ePortProhibited(106),
        portGracefulShutdown(107),
        trunkNotFullyActive(108),
        fabricBindingSwitchWwnNotFound(109),
        fabricBindingDomainInvalid(110),
        fabricBindingDbMismatch(111),
        fabricBindingNoRspFromPeer(112),
        dpvmVsanSuspended(113),
        dpvmVsanNotFound(114),
        trackedPortDown(115),
        ecSuspendedOnLoop(116),
        isolateBundleMisCfg(117),
        noPeerBundleSupport(118),
        portBringupIsolation(119),
        domainNotAllowedIsolated(120),
        virtualIvrDomainOverlapIsolation(121),
        outOfService(122),
        portAuthFailed(123),
        bundleStandby(124),
        portConnectorTypeErr(125),
        errorDisabledReInitLmtReached(126),
        ficonDupPortNum(127),
        localRcf(128),
        twoSwitchesWithSameWWN(129),
        invalidOtherSidePrincEFPReqRecd(130),
        domainOther(131),
        elpFailureAllZeroPeerWWNRcvd(132),
        preferredPathIsolation(133),
        fcRedirectIsolation(134),
        portActLicenseNotAvailable(135),
        sdmIsolation(136),
        fcidAllocationFailed(137),
        externallyDisabled(138),
        unavailableNPVUpstreamPort(139),
        unavailableNPVPrefUpstreamPort(140),
        sfpReadError(141),
        stickyDownOnLinkFailure(142),
        tooManyLinkFlapsErr(143),
        unidirectionalUDLD(144),
        txRxLoopUDLD(145),
        neighborMismatchUDLD(146),
        authzPending(147),
        hotStdbyInBundle(148),
        incompleteConfig(149),
        incompleteTunnelCfg(150),
        hwProgrammingFailed(151),
        tunnelDstUnreachable(152),
        suspendByMtu(153),
        sfpInvalid(154),
        sfpAbsent(155),
        portCapabilitiesUnknown(156),
        channelErrDisabled(157),
        vrfMismatch(158),
        vrfForwardReferencing(159),
        dupTunnelConfigDetected(160),
        primaryVLANDown(161),
        vrfUnusable(162),
        errDisableHandShkFailure(163),
        errDisabledBPDUGuard(164),
        dot1xSecViolationErrDisabled(165),
        emptyEchoUDLD(166),
        vfTaggingCapErr(167),
        portDisabled(168),
        tunnelModeNotConfigured(169),
        tunnelSrcNotConfigured(170),
        tunnelDstNotConfigured(171),
        tunnelUnableToResolveSrcIP(172),
        tunnelUnableToResolveDstIP(173),
        tunnelVrfDown(174),
        sifAdminDown(175),
        phyIntfDown(176),
        ifSifLimitExceeded(177),
        sifHoldDown(178),
        noFcoe(179),
        dcxCompatMismatch(180),
        isolateBundleLimitExceeded(181),
        sifNotBound(182),
        errDisabledLacpMiscfg(183),
        satFabricIfDown(184),
        invalidSatFabricIf(185),
        noRemoteChassis(186),
        vicEnableNotReceived(187),
        vicDisableReceived(188),
        vlanVsanMappingNotEnabled(189),
        stpNotFwdingInFcoeMappedVlan(190),
        moduleOffline(191),
        udldAggModeLinkFailure(192),
        stpInconsVpcPeerDisabled(193),
        setPortStateFailed(194),
        suspendedByVpc(195),
        vpcCfgInProgress(196),
        vpcPeerLinkDown(197),
        vpcNoRspFromPeer(198),
        protoPortSuspend(199),
        tunnelSrcDown(200),
        cdpInfoUnavailable(201),
        fexSfpInvalid(202),
        errDisabledIpConflict(203),
        fcotClkRateMismatch(204),
        portGuardTrustSecViolation(205),
        sdpTimeout(206),
        satIncompatTopo(207),
        waitForFlogi(208),
        satNotConfigured(209),
        npivNotEnabledInUpstream(210),
        vsanMismatchWithUpstreamSwPort(211),
        portGuardBitErrRate(212),
        portGuardSigLoss(213),
        portGuardSyncLoss(214),
        portGuardLinkReset(215),
        portGuardCreditLoss(216),
        ipQosMgrPolicyAppFailure(217),
        pauseRateLimitErrDisabled(218),
        lstGrpUplinkDown(219),
        stickyDnLinkFailure(220),
        routerMacFailure(221),
        dcxMultipleMsapIds(222),
        dcxHundredPdusRcvdNoAck(223),
        enmSatIncompatibleUplink(224),
        enmLoopDetected(225),
        nonStickyExternallyDisabled(226),
        subGroupIdNotAssigned(227),
        vemUnlicensed(228),
        profileNotFound(229),
        nonExistentVlan(230),
        vlanInvalidType(231),
        vlanDown(232),
        vpcPeerUpgrade(233),
        ipQosDcbxpCompatFailure(234),
        nonCiscoHbaVfTag(235),
        domainIdConfigMismatch(236),
        sfpSpeedMismatch(237),
        xcvrInitializing(238),
        xcvrAbsent(239),
        xcvrInvalid(240),
        vfcBindingInvalid(241),
        vlanNotFcoeEnabled(242),
        pvlanNativeVlanErr(243),
        ethL2VlanDown(244),
        ethIntfInvalidBinding(245),
        pmonFailure(246),
        l3NotReady(247),
        speedMismatch(248),
        flowControlMismatch(249),
        vdcMode(250),
        suspendedDueToMinLinks(251),
        enmPinFailLinkDown(252),
        inactiveM1PortFpathActiveVlan(253),
        parentPortDown(254),
        moduleRemoved(255),
        corePortMct(256),
        nonCorePortMct(257),
        ficonInorderNotActive(258),
        invalidEncapsulation(259),
        modemLineDeasserted(260),
        ipSecHndshkInProgress(261),
        sfpEthCompliantErr(262),
        cellularModemUnattached(263),
        outOfGlblRxBuffers(264),
        sfpFcCompliantErr(265),
        ethIntfNotLicensed(266),
        domainIdsInvalid(267),
        fabricNameInvalid(268),
        ficonNoPortSwapLogicalPort(269),
        ficonInvalidPortNum(270),
        remotePortInL2vpnDown(271),
        suspendedDueToNoLacpPdus(272),
        fcotValidationFailedAtDriver(273),
        unsupportedTransceiverMd5DigestNotSame(274),
        unsupportedTransceiver(275),
        adminStateConfigChange(276),
        vlanAllowedList(277),
        vlanAllowedListOverride(278),
        vlanAllowedListAdd(279),
        vlanAllowedRemove(280),
        vlanCfgStateChange(281),
        vlanCfgDelete(282),
        pppPeerNotResponding(283),
        pppAuthFailed(284),
        xcvrAuthFailed(285),
        badFramesRcvdFromLink(286),
        physicalPortHotStandBy(287),
        wimaxModemUnattached(288),
        wpanModemUnattached(289),
        rbhModulo(290),
        fpcMinLinkNotMet(291),
        misCabling(292),
        rcvSrpOnNonFcoeFex(293),
        acessPortOnBd(294),
        lacpMisConfig(295),
        fortyGMemberPort(300),
        goldLoopBackTest(301),
        edpError(302),
        vpcCompCheckFailed(303),
        aclQosNoResource(304),
        vpcShutdown(305),
        notPcMember(306),
        systemIntfShut(307),
        speedGroupConfigMisMatch(308),
        dot1qMisConfig(310),
        mdMisMatch(311),
        vpcPeerLinkShut(312),
        notAvailable(313)
        }
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    The cause of current operational state of the
--    interface.
--    
--    GLOSSARY:
--    
--            BB        - Buffer-to-Buffer.
--    
--    BB_Credit - Buffer-to-Buffer credit, a link level flow
--                control mechanism.
--    
--    B_Port    - A Fibre Channel, Bridging port.
--    
--    BPDU      - Bridge Protocol Data Unit.
--    
--    CDP       - Cisco Discovery Protocol.
--    
--    Class F   - A connectionless service with notification on 
--                non-delivery between E_Ports, used for control, 
--                coordination, and configuration of the Fabric.
--    
--    Class N   - Refers to any class of service (different types
--                of frame delivery services) other than Class F.
--    
--    E_D_TOV   - Error Detect Timeout Value.
--    
--    EDP       - Error Disabled Policy.
--    
--    ENM       - Egress Non-Multicast.
--    
--    ELP       - Exchange Link Parameter.
--    
--    E-mode    - A fibre channel port providing E_Port 
--                functionality. 
--    
--    E_Port    - A Fabric Expansion Port.  
--    
--    EPP       - Exchange Peer Parameters.
--    
--    ESC       - Exchange Switch Capabilities.
--    
--    Fabric    - The set of physically connected fibre channel
--                switches.
--    
--    FEX       - Fabric EXtender.
--    
--    FC-FS     - Fibre Channel Framing and Signaling.
--    
--    FCIP      - Fibre Channel over IP protocol.
--    
--    FCID      - Fibre Channel Domain ID.
--    
--    FCOE      - Fibre Channel Over Ethernet.
--    
--    FCOT      - Fibre channel optical transmitter.
--    
--    FC-PH     - The Fibre Channel Physical and Signaling 
--                standard.
--    
--    FCSP      - Fibre Channel Security Protocol. 
--    
--    Fibre Channel - The primary protocol for building SANs. 
--    
--    FICON     - An I\O protocol used between IBM (and compatible) 
--                mainframes and storage.
--    
--    FLOGI     - Fabric Login, used by a node port to establish a
--                session with the fabric.
--    
--    FPC       - Fabric Port Channel.
--    
--    GBIC      - Gigabit Interface Converter; a removable 
--                transceiver module permitting Fibre Channel and 
--                Gigabit Ethernet physical-layer transport.
--    
--    Interconnect_Ports - Switch Ports that assume either the
--                E_Port or B_Port mode are generally referred to 
--                as Interconnect_Ports.
--    
--    LACP      - Link Access Control Protocol.
--    
--    LIP       - Loop Initialization Primitive sequence.
--    
--    LR        - Link Reset, the FC-PH defined primitive sequence 
--                used to initiate a link reset.
--    
--    MTU       - Maximun transmission unit. 
--    
--    NOS       - Not Operational Sequence, the FC-PH defined 
--                primitive sequence to indicate that the 
--                transmitting port has detected a link failure (or)
--                offline condition.
--    
--    VIC       - Virtual Interface Card.
--    
--    VPC       - Virtual Port Channel.
--    
--    NPIV      - N Port Identifier Virtualization.
--    
--    NPV       - NPort Virtualizer.
--    
--    Nx_Port   - A Fiber Channel Node Port. 
--    
--    OLS       - Offline Sequence, the FC-PH defined primitive 
--                sequence to indicate that the port is entering
--                into offline state.
--    
--    OHMS      - Online Health Management System.
--    
--    PMON      - Port Monitor.
--    
--    QoS       - Quality of Service.
--    
--    R_A_TOV   - Resource Allocation Timeout Value.
--    
--    RBH       - Resource Bundle Hash.
--    
--    RCF       - Reconfigure Fabric. 
--    
--    Rxbbcredit - Receive BB credit value configured for 
--                 a FC interface.
--    
--    SAN       - Storage Area Network; a network linking computing 
--                devices to disk or tape arrays and other devices 
--                over Fibre Channel.
--    
--    SIF       - Service Information Field.
--    
--    SDM       - Security Device Manager.
--    
--    SDP       - Secure Device Provisioning.
--    
--    SFP       - Small Formfactor Pluggable.
--    
--    SRP       - Spatial Reuse Protocol.
--    
--    TE_Port   - Trunking E_Port.
--    
--    TOV       - Time out value.
--    
--    UDLD      - Uni Directional Link Detection.
--    
--    VDC       - Virtual Device Context.
--    
--    VEM       - Virtual Ethernet Module.
--    
--    VFC       - Virtual Fibre Channel.
--    
--    VRF       - VPN Routing and Forwarding.
--    
--    VSAN      - Virtual Storage Area Network.
--    
--    WiMAX     - Worldwide Interoperability for Microwave Access.
--    
--    WPAN      - Wireless Personal Area Network.
--    
--    WWN       - World Wide Name.
--    
--    xE_Port   - A Fiber channel port that can assume either 
--                E_Port or TE_Port mode.
--    
--    The enumerated values which provides the cause of the current
--    operational state of the interface are,
--    
--       'other(1)' - reasons other than defined here.
--    
--       'none(2)' - no failure.
--    
--       'hwFailure(3)' - hardware failure.  
--    
--       'loopbackDiagFailure(4)' - loopback diagnostics failure.
--    
--       'errorDisabled(5)' - the port is not operational due to 
--           some error conditions that require administrative 
--           attention.
--    
--       'swFailure(6)' - software failure.
--    
--       'linkFailure(7)' - physical link failure.
--    
--       'offline(8)' -  physical link is in offline state as 
--           defined in the FC-FS standards.
--    
--       'nonParticipating(9)' - during loop initialization, the 
--           port is not allowed to participate in loop operations.
--    
--       'initializing(10)' - port is being initialized. 
--    
--       'vsanInactive(11)'- port VSAN is inactive. The port becomes 
--           operational again when the port VSAN is active. 
--    
--       'adminDown(12)' - ifAdminStatus is 'down'.
--    
--       'channelAdminDown(13)' - this port is a member of a port 
--           channel and that port channel's ifAdminStatus is 
--           'down'. 
--    
--       'channelOperSuspended(14)' - this port is a member of a 
--           port channel and its operational parameters are 
--           incompatible with the port channel parameters.  
--    
--       'channelConfigurationInProgress(15)' - this port is 
--           undergoing a port channel configuration.
--    
--       'rcfInProgress(16)' - an isolated xE_port is transmitting 
--           an reconfigure fabric, requesting a disruptive 
--           reconfiguration in an attempt to build a single, 
--           non-isolated fabric. Only the Interconnect_Ports can 
--           become isolated. 
--    
--       'elpFailureIsolation(17)' - during a port initialization 
--           the prospective Interconnect_Ports find incompatible 
--           link parameters.
--    
--       'escFailureIsolation(18) - during a port initialization the 
--           prospective Interconnect_Ports are unable to proceed 
--           with initialization as a result of ESC.
--    
--       'domainOverlapIsolation(19)' - there is a overlap in 
--           domains while attempting to connect two existing 
--           fabrics.
--    
--       'domainAddrAssignFailureIsolation(20)' - the elected 
--           principal switch is not capable of performing domain 
--           address manager functions so no Nx_port traffic can be 
--           forwarded across switches, hence all Interconnect_Ports 
--           in the switch are isolated.
--    
--       'domainOtherSideEportIsolation(21)' - the peer E_port is 
--           isolated.
--    
--       'domainInvalidRcfReceived(22)' - invalid RCF received.
--    
--       'domainManagerDisabled(23) - domain manager is disabled.
--    
--       'zoneMergeFailureIsolation(24)' - the two Interconnect_Ports 
--           cannot merge zoning configuration after having exchanged 
--           merging request for zoning.
--    
--       'vsanMismatchIsolation(25)' - this VSAN is not configured 
--           on both sides of a trunk port.
--    
--       'parentDown(26)' - the physical port to which this interface 
--           is bound is down.
--    
--       'srcPortNotBound(27)'- no source port is specified for this 
--           interface.
--    
--       'interfaceRemoved(28)' - interface is being removed.
--    
--       'fcotNotPresent(29)' - FCOT (GBIC) not present.
--    
--       'fcotVendorNotSupported(30)' - FCOT (GBIC) vendor is not 
--           supported. 
--    
--       'incompatibleAdminMode(31)' - port administrative mode is 
--           incompatible with port capabilities. 
--    
--       'incompatibleAdminSpeed(32)' - port speed is incompatible 
--           with port capabilities. 
--    
--       'suspendedByMode(33)' - port that belongs to a port channel
--           is suspended due to incompatible operational mode.
--    
--       'suspendedBySpeed(34)' - port that belongs to a port channel
--           is suspended due to incompatible operational speed.
--    
--       'suspendedByWwn(35)' - port that belongs to a port channel 
--           is suspended due to incompatible remote switch WWN.
--    
--       'domainMaxReTxFailure(36)' - domain manager failure after 
--           maximum retries.
--    
--       'eppFailure(37)' - trunk negotiation protocol failure after 
--           maximum retries.
--    
--       'portVsanMismatchIsolation(38)' - an attempt is made to 
--           connect two switches using non-trunking ports having 
--           different port VSANs. 
--    
--       'loopbackIsolation(39)' - port is connected to another port 
--           in the same switch.
--    
--       'upgradeInProgress(40)' - linecard upgrade in progress.
--    
--       'incompatibleAdminRxBbCredit(41)' - receive BB credit is 
--           incompatible.
--    
--       'incompatibleAdminRxBufferSize(42)' - receive buffer size 
--           is incompatible.
--    
--       'portChannelMembersDown(43)' - no operational members.
--    
--       'zoneRemoteNoRespIsolation(44)' - isolation due to remote 
--           zone server not responding.
--    
--       'firstPortUpAsEport(45)' - in a over subscribed line card, 
--           when the first port in a group is up in E-mode, other 
--           ports in that group cannot be brought up.
--    
--       'firstPortNotUp(46)' - in a over subscribed line card, 
--           first port cannot be brought up in E-mode when the 
--           other ports in the group are up.
--    
--       'peerFcipPortClosedConnection(47)' - port went down because 
--           peer FCIP port closed TCP connection.    
--    
--       'peerFcipPortResetConnection(48)' - port went down because 
--           the TCP connection was reset by the peer FCIP port.
--    
--       'fcipPortMaxReTx(49)' - FCIP port went down due to maximum 
--           TCP re-transmissions reached the configured limit.
--    
--       'fcipPortKeepAliveTimerExpire(50)' - FCIP port went down 
--           due to TCP keep alive timer expired.
--    
--       'fcipPortPersistTimerExpire(51)' - FCIP port went down due 
--           to TCP persist timer expired.
--    
--       'fcipPortSrcLinkDown(52)' - FCIP port went down due to 
--           Ethernet link down.
--    
--       'fcipPortSrcAdminDown(53)' - FCIP port went down because 
--           the source Ethernet link was administratively shutdown.
--    
--       'fcipPortAdminCfgChange(54)' - FCIP port went down due to 
--           configuration change. 
--    
--       'fcipSrcPortRemoved(55)' - FCIP port went down due to source 
--           port removal.
--    
--       'fcipSrcModuleNotOnline(56)' - FCIP port went down due to 
--           source module not online.
--    
--       'invalidConfig(57)' - this port has a misconfiguration with 
--           respect to port channels.
--    
--       'portBindFailure(58)' - port got isolated due to port bind 
--           failure.  
--    
--       'portFabricBindFailure(59)' - port got isolated due to 
--           fabric bind failure.    
--    
--       'noCommonVsanIsolation(60)' - trunk is isolated because 
--           there are no common VSANs with peer.
--    
--       'ficonVsanDown (61)' - FICON VSAN down.
--    
--       'invalidAttachment (62)' -  invalid attachment.
--    
--       'portBlocked (63)' - port blocked due to FICON. 
--    
--       'incomAdminRxBbCreditPerBuf (64)' - disabled due to 
--           incompatible administrative port rxbbcredit, 
--           performance buffers.
--    
--       'tooManyInvalidFlogis (65)' - suspended due to too many 
--           invalid FLOGIs. 
--    
--       'deniedDueToPortBinding (66)' - suspended due to port 
--           binding.
--    
--       'elpFailureRevMismatch (67)' - isolated for ELP failure due 
--           to revision mismatch.
--    
--       'elpFailureClassFParamErr (68)' - isolated for ELP failure 
--           due to Class F parameter error.
--    
--       'elpFailureClassNParamErr (69)' - isolated for ELP failure 
--           due to Class N parameter error.
--    
--       'elpFailureUnknownFlowCtlCode (70)' - isolated for ELP 
--           failure due to invalid flow control code.
--    
--       'elpFailureInvalidFlowCtlParam (71)' - isolated for ELP 
--           failure due to invalid flow control parameter.
--    
--       'elpFailureInvalidPortName(72)' - isolated for ELP failure 
--           due to invalid port name.
--    
--       'elpFailureInvalidSwitchName (73)' - isolated for ELP 
--           failure due to invalid switch name.
--    
--       'elpFailureRatovEdtovMismatch (74)' - isolated for ELP 
--           failure due to R_A_TOV or E_D_TOV mismatch.
--    
--       'elpFailureLoopbackDetected (75)' - isolated for ELP 
--           failure due to loopback detected.
--    
--       'elpFailureInvalidTxBbCredit (76)' - isolated for ELP 
--           failure due to invalid transmit BB credit.
--    
--       'elpFailureInvalidPayloadSize (77)' - isolated for ELP 
--           failure due to invalid payload size.
--    
--       'bundleMisCfg (78)' - misconfiguration in port channel 
--           membership detected.
--    
--       'bitErrRuntimeThreshExceeded (79)' - bit error rate too 
--           high. It has exceeded the run time threshold.
--    
--       'linkFailLinkReset (80)' - link failure due to link reset.
--    
--       'linkFailPortInitFail (81)' - link failure due to port 
--           initialization failure.
--    
--       'linkFailPortUnusable (82)' - link failure due to port 
--           unusable.
--    
--       'linkFailLossOfSignal (83)' - link failure due to loss of 
--           signal. 
--    
--       'linkFailLossOfSync (84)' - link failure due to loss of 
--           sync.
--    
--       'linkFailNosRcvd (85)' - link failure due to non-operational 
--           sequences received.
--    
--       'linkFailOLSRcvd (86)' - link failure due to offline 
--           sequences received.
--    
--       'linkFailDebounceTimeout (87)' - link failure due to 
--           re-negotiation failed.
--    
--       'linkFailLrRcvd (88)' - link failure when link reset(LR) 
--           operation fails due to non-empty receive queue.  
--    
--       'linkFailCreditLoss (89)' - link failure due to excessive 
--           credit loss indications.
--    
--       'linkFailRxQOverflow (90)' - link failure due to receive 
--           queue overflow.
--    
--       'linkFailTooManyInterrupts (91)' - link failure due to 
--           excessive port interrupts.
--    
--       'linkFailLipRcvdBb (92)' - link failure when loop 
--           initialization(LIP) operation fails due to non empty 
--           receive queue.
--    
--       'linkFailBbCreditLoss (93)' - link failure when link 
--           reset(LR) operation fails due to queue not empty.
--    
--       'linkFailOpenPrimSignalTimeout (94)' - link failure due to
--           open primitive signal timeout while receive queue
--           not empty.
--    
--       'linkFailOpenPrimSignalReturned (95)' - link failure due to
--           open primitive signal returned while receive queue 
--           not empty. 
--    
--       'linkFailLipF8Rcvd (96)' - link failure due to F8 LIP 
--           received.
--    
--       'linkFailLineCardPortShutdown (97)' - link failure due to 
--           port shutdown.
--    
--       'fcspAuthenFailure (98)' - fibre channel security protocol 
--           authorization fail.
--    
--       'fcotChecksumError (99)' - FCOT SPROM checksum error. 
--    
--       'ohmsExtLoopbackTest (100)' - link suspended due to external 
--           loopback diagnostics failure.
--    
--       'invalidFabricBindExchange (101)' - invalid fabric binding 
--           exchange.
--    
--       'tovMismatch (102)' - link isolation due to TOV mismatch.
--    
--       'ficonNotEnabled (103)' - FICON not enabled.
--    
--       'ficonNoPortNumber (104)' - no FICON port number.
--    
--       'ficonBeingEnabled (105)' - FICON is being enabled.
--    
--       'ePortProhibited (106)' - port down because FICON prohibit 
--           mask in place for E/TE port.
--    
--       'portGracefulShutdown (107)' - port has been shutdown 
--           gracefully.
--    
--       'trunkNotFullyActive (108)' - some of the VSANs which are 
--           common with the peer are not up.
--    
--       'fabricBindingSwitchWwnNotFound (109)' - peer switch WWN not 
--           found in fabric binding active database.
--    
--       'fabricBindingDomainInvalid (110)' - peer domain ID is 
--           invalid in fabric binding active database.
--    
--       'fabricBindingDbMismatch (111)' - fabric binding active 
--           database mismatch with peer. 
--    
--       'fabricBindingNoRspFromPeer (112)' - fabric binding no 
--           response from peer.
--    
--       'dpvmVsanSuspended (113)' - dpvm vsan is suspended.
--    
--       'dpvmVsanNotFound (114)' - dpvm vsan not found.
--    
--       'trackedPortDown (115)' - port down because tracked
--           port is down.
--    
--       'ecSuspendedOnLoop (116)' - port suspended because extended
--           BB credits are configured on loop port.
--    
--       'isolateBundleMisCfg (117)' - port isolated due to bundle
--           mis-configuration.
--    
--       'noPeerBundleSupport (118)' - peer port does not support
--           bundle.
--    
--       'portBringupIsolation (119)' - trunk port isolated during 
--           bringup time.
--    
--       'domainNotAllowedIsolated (120)' - port isolated due to
--           domain not allowed.
--    
--       'virtualIvrDomainOverlapIsolation (121)' - port isolated
--                  due to virtual IVR domain overlap.
--    
--       'outOfService (122)' - port is in out of service state.
--    
--       'portAuthFailed (123)' - port has encountered an 802.1x 
--        authentication failure.
--    
--       'bundleStandby (124)' - port cannot be brought up in 
--               a bundle, since the bundle has max members.
--    
--       'portConnectorTypeErr (125)' - Error in the port connector 
--        type (SFP).
--    
--       'errorDisabledReInitLmtReached (126)' - the port is not 
--        operational after trying to initialize the port multiple 
--        times due to some erorrs.
--    
--       'ficonDupPortNum (127)' - the ficon vsan has a duplicate 
--        port number.
--    
--       'localRcf (128)' - fcdomain applied a locally disruptive
--        reconfiguration (the local domain became invalid; no 
--        RCF frames have been sent outside the local switch).
--    
--        'twoSwitchesWithSameWWN (129)' - merge attempt between
--        VSANs containing the same WWN. If the user attempts to 
--        merge two different VSANs and both have at least one 
--        switch with the same WWN then the link in between the 
--        VSANs is isolated.
--    
--        'invalidOtherSidePrincEFPReqRecd (130)' - EFP request frame
--        indicating a principal switch other than the locally 
--        known one.
--    
--        'domainOther (131)' - other domain manager reasons not 
--        defined here.
--    
--        'elpFailureAllZeroPeerWWNRcvd (132)' - isolated for ELP 
--        failure due to peer WWN is received with all zeros.
--    
--        'preferredPathIsolation (133)' - port isolated due to
--         preferred path not able to program the routes.
--    
--        'fcRedirectIsolation (134)' - port isolated due to
--                FC Redirect not being able to program routes.
--    
--         'portActLicenseNotAvailable (135)' - port not brought up
--            due to lack of port activation licenses.
--    
--         'sdmIsolation (136)' - port isolated due to SDM 
--            (Security Device Manager) not being
--            able to program routes.
--    
--         'fcidAllocationFailed (137)' - port down due to failure
--            in FCID (Fibre Channel Domain ID) allocation.   
--    
--         'externallyDisabled (138)' - port externally disabled.
--    
--         'unavailableNPVUpstreamPort (139)' - NPV 
--                 (NPort Virtualizer) upstream port not available.
--    
--         'unavailableNPVPrefUpstreamPort (140)' - NPV 
--            (NPort Virtualizer) preferred 
--            upstream port not available.
--    
--         'sfpReadError (141)' - the port is not operational due to 
--                 SFP (Small Formfactor Pluggable) read error.
--    
--         'stickyDownOnLinkFailure (142)' - the port is 
--                 not operational due to link failure 
--                 in the sticky down mode.
--    
--         'tooManyLinkFlapsErr (143)' - too many link flaps 
--                 on the port in a short interval.
--    
--         'unidirectionalUDLD (144)' - unidirectional UDLD 
--            (Uni Directional Link Detection) detected.
--    
--         'txRxLoopUDLD (145)' - UDLD (Uni Directional 
--                 Link Detection) Tx Rx loop.
--    
--         'neighborMismatchUDLD (146)' - UDLD 
--            (Uni Directional Link Detection) neighbor mismatch.
--    
--         'authzPending (147)' - authorization pending.
--    
--         'hotStdbyInBundle (148)' - hot standby in bundle.
--    
--         'incompleteConfig (149)' - all parameters on the port 
--                          have not been configured.
--    
--         'incompleteTunnelCfg (150)' - incomplete tunnel config.
--    
--         'hwProgrammingFailed (151)' - hardware programming failed.
--    
--         'tunnelDstUnreachable (152)' - no route to 
--                 tunnel destination address.
--    
--         'suspendByMtu (153)' - MTU allocation failed.
--    
--         'sfpInvalid (154)' - SFP (Small Formfactor Pluggable) 
--            is not Cisco certified.
--    
--         'sfpAbsent (155)' - SFP (Small Formfactor 
--                 Pluggable) is absent.
--    
--        'portCapabilitiesUnknown (156)' - the capabilities of the 
--                port are unknown.
--    
--         'channelErrDisabled (157)' - the port-channel to which 
--                 the port belongs is in error disabled state.
--    
--         'vrfMismatch (158)' - Mismatch in source and transport VRF
--                    (VPN Routing and Forwarding).
--    
--         'vrfForwardReferencing (159)' - Forward referencing 
--                 transport VRF (VPN Routing and Forwarding).
--    
--         'dupTunnelConfigDetected (160)' - two tunnel interfaces 
--                 with same configuration is not allowed.
--    
--         'primaryVLANDown (161)' - primary VLAN is in down state.
--    
--         'vrfUnusable (162)' - VRF (VPN Routing and Forwarding) 
--                is unusable.
--    
--         'errDisableHandShkFailure (163)' - port is not operational 
--                         due to an internal handshake failure.
--    
--         'errDisabledBPDUGuard (164)' - BPDUGuard 
--         (Bridge Protocol Data Unit) triggered 
--         error disable on the port.
--    
--         'dot1xSecViolationErrDisabled (165)' - error disabled 
--               due to dot1x security violation.
--    
--         'emptyEchoUDLD (166)' - UDLD (Uni Directional 
--                 Link Detection) empty echo.
--    
--         'vfTaggingCapErr (167)' - VF Tagging capability 
--                 mismatch error.
--    
--         'portDisabled (168)' - Port disabled.
--    
--         'tunnelModeNotConfigured (169)' - Tunnel Mode is not 
--                         configured.
--    
--         'tunnelSrcNotConfigured (170)' - Tunnel Source is not 
--                         configured. 
--    
--         'tunnelDstNotConfigured (171)' - Tunnel Destination 
--                         is not configured.
--    
--         'tunnelUnableToResolveSrcIP (172)' - Unable to resolve 
--                         tunnel source IP address. 
--    
--         'tunnelUnableToResolveDstIP (173)' - Unable to resolve 
--                         tunnel destination IP address.
--    
--         'tunnelVrfDown (174)' - Tunnel VRF down.
--    
--         'sifAdminDown (175)' - SIF (Service Information Field) 
--            is admin down.
--    
--         'phyIntfDown (176)' - Physical interface is down.
--    
--         'ifSifLimitExceeded (177)' - Interface SIF 
--         (Service Information Field)limit is exceeded.
--    
--         'sifHoldDown (178)' - SIF (Service Information Field) 
--                 hold down.
--    
--         'noFcoe (179)' - No FCOE (Fibre Channel Over Ethernet) 
--            configuration.
--    
--         'dcxCompatMismatch (180)' - DCX Compatibility Mismatch.
--    
--         'isolateBundleLimitExceeded (181)' - Isolation due to 
--                     bundle limit exceeded.
--    
--         'sifNotBound (182)' - SIF (ervice Information Field) 
--                 is not bound.
--    
--         'errDisabledLacpMiscfg (183)' - Error Disabled due to 
--                 LACP (Link Access Control Protocol) misconfig.
--    
--         'satFabricIfDown (184)' - Satellite fabric interface down.
--    
--         'invalidSatFabricIf (185)' - Invalid satellite fabric 
--                         interface.
--    
--         'noRemoteChassis (186)' - No remote chassis.
--    
--         'vicEnableNotReceived (187)' - VIC enable not received.
--    
--         'vicDisableReceived (188)' - VIC disable received.
--    
--         'vlanVsanMappingNotEnabled (189)' - VLAN VSAN mapping not 
--                         enabled.
--    
--         'stpNotFwdingInFcoeMappedVlan (190)' - STP not forwarding 
--                         in FCOE Mapped Vlan.
--    
--         'moduleOffline (191)' - Module Offline.
--    
--         'udldAggModeLinkFailure (192)' - UDLD (Uni Directional Link
--            Detection) aggresive mode link failure.
--    
--         'stpInconsVpcPeerDisabled (193)' - STP inconsistent 
--                 VPC (Virtual Port Channel) peer disabled. 
--    
--         'setPortStateFailed (194)' - Set port state failed.
--    
--         'suspendedByVpc (195)' - Suspended by VPC 
--                 (Virtual Port Channel).
--    
--         'vpcCfgInProgress (196)' - VPC (Virtual Port Channel)
--             configuration in progress.
--    
--         'vpcPeerLinkDown (197)' - VPC (Virtual Port Channel)
--             peer link down.
--    
--         'vpcNoRspFromPeer (198)' - VPC (Virtual Port Channel) 
--            no response from peer.
--    
--         'protoPortSuspend (199)' - Proto port suspend.
--    
--         'tunnelSrcDown (200)' - Tunnel source down.
--    
--         'cdpInfoUnavailable (201)' - CDP 
--         (Cisco Discovery Protocol) information unavailable.
--    
--         'fexSfpInvalid (202)' - FEX (Fabric Extender) 
--         SFP (Small Formfactor Pluggable) invalid.
--    
--         'errDisabledIpConflict (203)' - Error Disabled due to IP
--                          conflict.
--    
--         'fcotClkRateMismatch (204)' - FCOT CLK rate mismatch.
--    
--         'portGuardTrustSecViolation (205)' - Error disabled due 
--             to port guard (Cisco Trusted Security Violation).
--    
--         'sdpTimeout (206)' - SDP (Secure Device Provisioning)
--                  timeout.
--    
--         'satIncompatTopo (207)' - Satellite incompatible topology.
--    
--         'waitForFlogi (208)' - Wait for FLOGI.
--    
--         'satNotConfigured (209)' - Satellite not configured.
--    
--         'npivNotEnabledInUpstream (210)' - NPIV (N Port Identifier
--            Virtualization) not enabled in upstream.
--    
--         'vsanMismatchWithUpstreamSwPort (211)' - VSAN 
--                 mismatch with upstream switch port.
--    
--         'portGuardBitErrRate (212)' - Error disabled due to port 
--                         guard (Bit Error Rate).
--    
--         'portGuardSigLoss (213)' - Error disabled due to 
--                 port guard (Signal Loss).
--    
--         'portGuardSyncLoss (214)' - Error disabled due to port 
--                         guard (Sync Loss).
--    
--         'portGuardLinkReset (215)' - Error disabled due to port
--                         guard (Link Reset).
--    
--         'portGuardCreditLoss (216)' - Error disabled due to port
--                         guard (Credit Loss).
--    
--         'ipQosMgrPolicyAppFailure (217)' - IP QOS Manager policy 
--                      application failure.
--    
--         'pauseRateLimitErrDisabled (218)' - Port error disabled due
--                                    to pause rate limit condition.
--    
--         'lstGrpUplinkDown (219)' - EthPM LSTGRP downstream link 
--                         down due to upstream link down.
--    
--         'stickyDnLinkFailure (220)' - Port kept in error disabled
--                                     state due to Link Failure.
--    
--         'routerMacFailure (221)' - Router MAC failure.
--    
--         'dcxMultipleMsapIds (222)' - Port error disabled due to
--                                    multiple MSAP IDs (DCX).
--    
--         'dcxHundredPdusRcvdNoAck (223)' - Hundred PDUs received 
--                         without ACK (DCX).
--    
--         'enmSatIncompatibleUplink (224)' - Satellite Incompatible 
--                         Uplink.
--    
--         'enmLoopDetected (225)' - Loop Detected (ENM).
--    
--         'nonStickyExternallyDisabled (226)' - Disabled by VPD 
--                         Manager with shut/no shut allowed.
--    
--         'nonStickyExternallyDisabled (227)' - Sub-group ID 
--                         not assigned.
--    
--         'vemUnlicensed (228)' - VEM Unlicensed.
--    
--         'profileNotFound (229)' - Profile not found.
--    
--         'nonExistentVlan (230)' - VLAN does not exist.
--    
--         'vlanInvalidType (231)' - Invalid VLAN type.
--    
--         'vlanDown (232)' - VLAN down.
--    
--         'vpcPeerUpgrade (233)' - VPC Peer Upgrade.
--    
--         'ipQosDcbxpCompatFailure (234)' - IPQOS DCBXP compatibility
--                       failure.
--    
--         'nonCiscoHbaVfTag (235)' - Error Disabled due to Non-Cisco 
--                         HBA VF Tag.
--    
--         'domainIdConfigMismatch (236)' - Domain ID config mismatch.
--    
--         'sfpSpeedMismatch (237)' - SFP (Small Formfactor Pluggable)
--             speed mismatch.
--         'xcvrInitializing (238)' - Transceiver initializing.
--    
--         'xcvrAbsent (239)' - Transceiver absent.
--    
--         'xcvrInvalid (240)' - Transceiver invalid.
--    
--         'vfcBindingInvalid (241)' - Invalid VFC Binding.
--    
--         'vlanNotFcoeEnabled (242)' - VLAN down due to FCOE 
--                         disabled.
--    
--         'pvlanNativeVlanErr (243)' - Private VLAN 
--                         Native VLAN error.
--    
--         'ethL2VlanDown (244)' - Ethernet L2 VLAN down.
--    
--         'ethIntfInvalidBinding (245)' - Invalid Binding 
--                 to Ethernet Interface.
--    
--         'pmonFailure (246)' - PMON Failure.
--    
--         'l3NotReady (247)' - L3 not ready.
--    
--         'speedMismatch (248)' - Speed Mismatch.
--    
--         'flowControlMismatch (249)' - Flow Control Mismatch.
--    
--         'vdcMode (250)' - VDC mode 
--    
--         'suspendedDueToMinLinks (251)' - Suspended due 
--                         to Min Links.
--    
--         'enmPinFailLinkDown (252)' - ENM Pin Fail Link Down.
--    
--         'inactiveM1PortFpathActiveVlan (253)' - Inactive M1 Port
--                                F Path Active VLAN.
--    
--         'parentPortDown (254)' - Parent Port Down.
--    
--         'moduleRemoved (255)' - Module Removed.
--    
--         'corePortMct (256)' - Core Port MCT.
--    
--         'nonCorePortMct (257)' - Non Core port MCT.
--    
--         'ficonInorderNotActive (258)'- FICON Inorder Not Active.
--    
--         'invalidEncapsulation (259)' - Invalid Encapsulation.
--    
--         'modemLineDeasserted (260)' - Modem line Deasserted.
--    
--         'ipSecHndshkInProgress (261)' - IP Sec Handshake in 
--                                 progress.
--    
--         'sfpEthCompliantErr (262)' - Sfp Ethernet compliant error.
--    
--         'cellularModemUnattached (263)' - Cellular Modem 
--                         unattached.
--    
--         'outOfGlblRxBuffers (264)' - Out of Global Rx Buffers.
--    
--         'sfpFcCompliantErr (265)' - Sfp Fc compliant Error.
--    
--         'ethIntfNotLicensed (266)' - Ethernet Interface Not 
--                                         Licensed.
--    
--         'domainIdsInvalid (267)' - Domain IDs Invalid.
--    
--         'fabricNameInvalid (268)' - Fabric Name Invalid.
--    
--         'ficonNoPortSwapLogicalPort (269)' - Ficon No Port Swap Logical Port.
--    
--         'ficonInvalidPortNum (270)' - Ficon Invalid Port Number.
--    
--         'remotePortInL2vpnDown (271)' - Remote Port in L2VPN Down.
--    
--         'suspendedDueToNoLacpPdus (272)' - Suspended due to no LACP PDUs.
--    
--         'fcotValidationFailedAtDriver (273)' - Fcot validation failed at driver.
--    
--         'unsupportedTransceiverMd5DigestNotSame (274)' - Unsupported transceiver MD5 digest not Same.
--    
--         'unsupportedTransceiver (275)' - Unsupport transceiver.
--    
--         'adminStateConfigChange (276)' - Admin state config change.
--    
--         'vlanAllowedList (277)' - Allowed Vlan list configured on the port.
--    
--         'vlanAllowedListOverride (278)' - Allowed Vlan list changed on the port.
--    
--         'vlanAllowedListAdd (279)' - Vlan has been added to the allowed Vlan list on the port.
--    
--         'vlanAllowedListRemove  (280)' - Vlan has been removed from the allowed Vlan list on the port.
--    
--         'vlanCfgStateChange (281)' - Port affected due to Vlan state change.
--    
--         'vlanCfgDelete (282)' - Port affected due to Vlan delete.
--    
--         'pppPeerNotResponding (283)' - ppp peer not responding.
--    
--         'pppAuthFailed (284)' - ppp authentication failed.
--    
--         'xcvrAuthFailed (285)' - Transceiver authentication failed.
--    
--         'badFramesRcvdFromLink (286)' - Excessive bad frames received from link.
--    
--         'physicalPortHotStandBy (287)'
--              - Physical Port in Hot-StandBy State.
--    
--         'wimaxModemUnattached (288)'
--              - Modem Disconnected from WiMAX network.
--    
--         'wpanModemUnattached (289)'
--              - Modem Disconnected from WPAN network.
--    
--         'rbhModulo (290)'
--              - Down due to RBH modulo load-balance feature toggle.
--    
--         'fpcMinLinkNotMet (291)'
--              - Suspended as the FPC min-link requirement has not
--                been met.
--    
--         'misCabling (292)'
--              - Miscabling detected.
--    
--         'rcvSrpOnNonFcoeFex (293)'
--              - Down due to received SRP for a non-FCOE capable FEX 
--    
--         'acessPortOnBd (294)'
--              - Inactive due to access port is configured with a
--                Bridge-Domain ID.
--    
--         'lacpMisConfig (295)'
--              - LACP port suspended due to misconfiguration.
--    
--         'fortyGMemberPort (300)'
--              - Port is a member of a 40G interface.
--    
--         'goldLoopBackTest (301)'
--              - Suspended due to Loopback diagnostics.
--    
--         'edpError (302)'
--              - Down due to EDP enforcement.
--    
--         'vpcCompCheckFailed (303)'
--              - VPC down because compatibility check failed.
--    
--         'aclQosNoResource (304)'
--              - Not enough free entries in TCAM bank for QoS.
--    
--         'vpcShutdown (305)'
--              - VPC shutdown.
--    
--         'notPcMember (306)'
--              - Port is not a member of a port channel.
--    
--         'systemIntfShut (307)'
--              - System interface shutdown.
--    
--         'speedGroupConfigMisMatch (308)'
--              - Speed-Group config does not match type of transceiver.
--    
--         'dot1qMisConfig (310)'
--              - Dot1q-tunnel misconfiguration.
--    
--         'mdMisMatch (311)'
--              - Mobility Domain Config Mismatch.
--    
--         'vpcPeerLinkShut (312)'
--              - Suspended because VPC peer link had been shut down.
--    
--         'notAvailable (313)'
--              - Port Operation Status is currently not available.
--         

EntLogicalIndexOrZero ::= INTEGER(0..2147483647)
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    This textual convention is an extension of entLogicalIndex.
--    If non-zero, the semantic is same as entLogicalIndex object.
--    If zero, no appropriate entLogicalIndex exists.  Any additional 
--    semantics must be defined as part of the description of any 
--    object which uses this syntax.

CiscoURLString ::= OCTET STRING(SIZE(1..255))
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    This textual convention defines the URL string.
--    The  Universal Resource Locator(URL). The URL strings
--    are compact string representation for a resource
--    available via internet. This is the address location 
--    of the page to load. The string should represent a
--    fully qualifying string with the format 
--    'protocol:/server/page'. In general the string should 
--    point to any value that can be saved/loaded.
--    Any limitation for the URL must be defined as part of
--    the description of any object which uses this syntax.
--  Refer
--    Uniform Resource Locators. RFC 1738.

CiscoURLStringOrEmpty ::= OCTET STRING(SIZE(0..255))
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    This textual convention is an extension of CiscoURLString.
--    This extension permits the additional value of empty (zero
--    length) string.  The description of any object which uses this
--    syntax must specifically describe the meaning of empty string
--    value.
--  Refer
--    Uniform Resource Locators. RFC 1738.

CiscoHTTPResponseStatusCode ::= Gauge(100..599)
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    This corresponds to the HTTP Status code.
--    The Status-Code element in HTTP response is 
--    a 3-digit integer result code of the attempt
--    to understand and satisfy the HTTP request
--    The Status-Code is intended for use by automata.
--    
--    The first digit of the Status-Code defines the class of 
--    response.  The last two digits do not have any 
--    categorization role. There are 5 values for the first digit:
--    
--     - 1xx: Informational - Request received, continuing process
--    
--     - 2xx: Success - The action was successfully received,
--            understood, and accepted
--    
--     - 3xx: Redirection - Further action must be taken in order 
--            to complete the request
--    
--     - 4xx: Client Error - The request contains bad syntax 
--            or cannot be fulfilled
--    
--     - 5xx: Server Error - The server failed to fulfill an 
--            apparently valid request.
--  Refer
--    RFC 2616 Section 6.1.1 Status Code and Reason Phrase.

CvE164Address ::= OCTET STRING(SIZE(1..128))
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    A UTF-8 string limited to the character set defined for
--    E.164, '0123456789*#,'.
--    Note that  represents the double quote which
--    cannot be contained in a SMI description clause.
--         OR
--    An IA5String limited to the character set '0123456789*#,.'
--  Refer
--    ITU-T E.164, Q.931 chapter 4.5.10
--     ITU-H H.225.0 Annex H

CiscoVlanList ::= OCTET STRING(SIZE(0..128))
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    Each octet within this value specifies a set of eight
--    VLANs. The object defined by this textual convention
--    can specify a VLAN range of 1k VLANs in its description.
--    Example: 0 - 1023, 1024 - 2047, etc. The first octet
--    represents the first 8 VLANs of the range of VLANs
--    specified by the object, the second octet represents
--    the next 8 VLANs, etc. When a VLAN range is not
--    specified, a default VLAN range of '0 - 1023' is assumed.
--    
--    Within each octet, the most significant bit represents
--    the lowest numbered VLAN, and the least significant bit
--    represents the highest numbered VLAN. Thus, each VLAN
--    of the device is represented by a single bit within the
--    value of this object.  If that bit has a value of '1'
--    then that VLAN is included in the set of VLANs; the VLAN
--    is not included if its bit has a value of '0'.
--    
--    Note that if the length of this string is less than
--    128 octets, any 'missing' octets are assumed to contain
--    the value zero. An NMS may omit any zero-valued octets
--    from the end of this string in order to reduce SetPDU size,
--    and the agent may also omit zero-valued trailing octets,
--    to reduce the size of GetResponse PDUs.

CiscoCosList ::= OCTET STRING(SIZE(1..2))
        -- BITS are:
        --   cos0(0)
        --   cos1(1)
        --   cos2(2)
        --   cos3(3)
        --   cos4(4)
        --   cos5(5)
        --   cos6(6)
        --   cos7(7)
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    Each bit represents a CoS value (0 through 7).

CiscoPbbServiceIdentifier ::= Gauge(1..16777216)
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    An integer-value which identifies the service instance of
--    the Provider Backbone Bridge frame.
--  Refer
--    IEEE P802.1ah/D3.3 chapter 9.8, December 2006

CiscoBridgeDomain ::= Gauge(1..65535)
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    An object with this syntax contains a bridge domain number
--    which is used to distinguish between multiple bridge domains. A
--    bridge domain represents a set of (logical) Ethernet segments
--    which are interconnected by 802.1D bridges. 802.1Q allows for a
--    maximum of 4095 VLANs within a bridge domain. Some devices can
--    be connected to multiple bridge domains, e.g., routers with
--    some of their interfaces in one bridge domain and other
--    interfaces in other bridge domain. In such devices, the
--    combination of bridge-domain-number and VLAN-id can be used to
--    uniquely identify any VLAN across all interfaces.

Cisco2KVlanList ::= OCTET STRING(SIZE(0..256))
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    Each octet within this value specifies a set of eight VLANs.
--    The object defined by this textual convention can specify a VLAN
--    range of 2k VLANs in its description. Example: 0 - 2047, 2048 -
--    4095, etc. The first octet represents the first 8 VLANs of the
--    range of VLANs specified by the object, the second octet
--    represents the next 8 VLANs, etc.
--    
--    Within each octet, the most significant bit represents the
--    lowest numbered VLAN, and the least significant bit represents
--    the highest numbered VLAN. Thus, each VLAN of the device is
--    represented by a single bit within the value of this object. If
--    that bit has a value of '1' then that VLAN is included in the
--    set of VLANs; the VLAN is not included if its bit has a value of
--    '0'.
--    
--    Note that if the length of this string is less than 256 octets,
--    any 'missing' octets are assumed to contain the value zero. An
--    NMS may omit any zero-valued octets from the end of this string
--    in order to reduce SetPDU size, and the agent may also omit
--    zero-valued trailing octets, to reduce the size of GetResponse
--    PDUs.

CiscoInterfaceIndexList ::= OCTET STRING(SIZE(0..256))
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    This textual convention contains a list of ifIndex values.
--    
--    Each ifIndex value is represented by four octets.
--    Every set of four octets represents a value of an instance
--    of ifIndex object, defined in IF-MIB, corresponding to a
--    particular interface.
--    
--    For example, the first octet to the fourth octet represent a 
--    value of the instance of ifIndex object for the first 
--    interface in the list.  The fifth octet to the eighth octet 
--    represent a value of the instance of ifIndex object for
--    the second interface in the list.
--    
--    Up to 64 interfaces can be represented by this textual 
--    convention.

CiscoVrfName ::= OCTET STRING(SIZE(0..32))
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    The name of the Virtual Private Network Routing and
--    Forwarding (VRF) domain.
--    
--    Semantics of a zero length CiscoVrfName are object-specific
--    and must be defined as part of the description of any object
--    which uses this syntax.

CiscoEntityIndexList ::= OCTET STRING(SIZE(0..256))
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    This text convention contains a list of entPhysicalIndex
--    values.
--    
--    Each entPhysicalIndex value is represented by four
--    octets. Every set of four octets represents a value of an
--    instance of entPhysicalIndex object, defined in ENTITY-MIB,
--    corresponding to a particular physical entity.
--    
--    For example, the first octet to the fourth octet
--    represents a value of the instance of entPhysicalIndex object
--    for the first physical entity in the list. The fifth octet to
--    the eighth octet represents a value of the instance of
--    entPhysicalIndex object for the second physical entity in the
--    list.
--    
--    Up to 64 physical entities can be represented by this
--    textual convention.

CiscoVlanIndex ::= INTEGER(0..4095)
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    The VLAN-id of a VLAN on ISL or 802.1q trunks.
--    
--    
--    For a new object which needs the vlan-id of a VLAN as 
--    its SYNTAX, it is suggested to import VlanIndex or VlanId 
--    from Q-BRIDGE-MIB instead of importing this TC. 
--    
--    
--    For a existing MIB which have the import of VlanIndex 
--    from CISCO-VTP-MIB, it is suggested to import this TC.

CiscoAbsZeroBasedCounter64 ::= --?? syntax is not convertable to SMIv1
        Counter
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    This TC describes an object which counts events with
--    the following semantics: objects of this type will be 
--    set to zero(0) on creation and will thereafter count 
--    appropriate events, it locks at the maximum value of 
--    2^64-1 (18446744073709551615 decimal) if the counter 
--    overflows. This TC may be used only in situations where
--    wrapping is not possible or extremely unlikely situation.


END