-- MIB created 6/25/99 12:57:42, by
--   SMIC (the next generation) version 1.6.29, November 22, 1994.

CISCO-TCPOFFLOAD-MIB DEFINITIONS ::= BEGIN

-- From file: "CISCO-TCPOFFLOAD-MIB.my"

IMPORTS
    IpAddress
            FROM SNMPv2-SMI-v1
    OBJECT-TYPE
            FROM RFC-1212
    DisplayString, RowStatus, TruthValue
            FROM SNMPv2-TC-v1
    ciscoMgmt
            FROM CISCO-SMI
    cipCardEntryIndex, cipCardDtrBrdIndex, cipCardSubChannelIndex
            FROM CISCO-CHANNEL-MIB;

ciscoTcpOffloadMIB OBJECT IDENTIFIER ::= { ciscoMgmt 31 }
-- MODULE-IDENTITY
--  LastUpdated
--    9503300000Z
--  OrgName
--    cisco IBM engineering Working Group
--  ContactInfo
--     Cisco Systems
--     Customer Service
--    
--    Postal: 170 W Tasman Drive
--     San Jose, CA  95134
--     USA
--    
--       Tel: +1 800 553-NETS
--    
--    E-mail: cs-snmp@cisco.com
--  Descr
--    This is the MIB module for objects used to manage
--    the cisco tcp offload feature.
--        
--    The IBM mainframe (host) supports TCP/IP. As a way to
--    save cycles on the host, the TCP/IP stack can be run 
--    on the 3172. This offloads the host from the protocol 
--    processing and is known as TCP-OFFLOAD. This mib 
--    identifies the manageable objects for the TCP-OFFLOAD
--    feature in the Cisco router.
--  RevDate
--    9801060000Z
--  RevDescr
--    With the addition of Cisco's new Channel Port
--                   Adapter cards, all the references to CIP in the
--                   MIB description and object descriptions are changed
--                   to CMCC (Cisco Mainframe Channel Connection). The
--                   object names in the form of cip... or cipCard...
--                   will remain the same, but will be valid objects
--                   for the Channel Port Adapter cards.
--  RevDate
--    9504270000Z
--  RevDescr
--    Initial version of this MIB module.

tcpOffloadObjects OBJECT IDENTIFIER ::= { ciscoTcpOffloadMIB 1 }
cipCardOffloadConfig OBJECT IDENTIFIER ::= { tcpOffloadObjects 1 }
ciscoTcpOffloadMibConformance OBJECT IDENTIFIER ::= { ciscoTcpOffloadMIB 2 }
ciscoTcpOffloadMibCompliances OBJECT IDENTIFIER ::= { ciscoTcpOffloadMibConformance 1 }
ciscoTcpOffloadMibGroups OBJECT IDENTIFIER ::= { ciscoTcpOffloadMibConformance 2 }

cipCardOffloadConfigTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CipCardOffloadConfigEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table contains configuration information for
         the TCP offload feature on the CMCC card.
         Changing these parameters will take effect immediately.
        
         The management station can create an entry in this table
         by setting the appropriate value in cipCardOffloadConfigRowStatus.
         All the objects in this table must be supplied for a successful
         create/set."
    ::= { cipCardOffloadConfig 1 }

cipCardOffloadConfigEntry OBJECT-TYPE
    SYNTAX CipCardOffloadConfigEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A list of OFFLOAD configuration values."
    INDEX { cipCardEntryIndex, cipCardDtrBrdIndex, cipCardSubChannelIndex }
    ::= { cipCardOffloadConfigTable 1 }

CipCardOffloadConfigEntry ::= SEQUENCE {
    cipCardOffloadConfigPath OCTET STRING(SIZE(2)),
    cipCardOffloadConfigDevice OCTET STRING(SIZE(2)),
    cipCardOffloadConfigIpAddr IpAddress,
    cipCardOffloadConfigHostName DisplayString(SIZE(1..10)),
    cipCardOffloadConfigRouterName DisplayString(SIZE(1..10)),
    cipCardOffloadConfigLinkHostAppl DisplayString(SIZE(1..10)),
    cipCardOffloadConfigLinkRouterAppl DisplayString(SIZE(1..10)),
    cipCardOffloadConfigAPIHostAppl DisplayString(SIZE(1..10)),
    cipCardOffloadConfigAPIRouterAppl DisplayString(SIZE(1..10)),
    cipCardOffloadConfigBroadcastEnable TruthValue,
    cipCardOffloadConfigRowStatus RowStatus
    }

cipCardOffloadConfigPath OBJECT-TYPE
    SYNTAX OCTET STRING(SIZE(2))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Hex path identifier for the escon director switch port
         containing the fiber from the channel on the host to 
         which this CMCC CLAW task connects. 
                           
         This is a concatenation of the switch port number, the 
         channel logical address (used by the host to associate 
         an logical partition (LPAR) with the control unit), and 
         the control unit logical address (address of a logical 
         control unit used by the host to associate a group of 
         physical devices). 
                           
         For a directly connected channel, the switch port number 
         is usually 01."
    ::= { cipCardOffloadConfigEntry 1 }

cipCardOffloadConfigDevice OBJECT-TYPE
    SYNTAX OCTET STRING(SIZE(2))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Two digit hex device address for the device the SNA host will
         use to communicate with the offload task on the CMCC. The address
         must be even."
    ::= { cipCardOffloadConfigEntry 2 }

cipCardOffloadConfigIpAddr OBJECT-TYPE
    SYNTAX IpAddress
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "IP address of the host application for the offload task as
         specified in the HOME statement of the PROFILE TCPIP."
    ::= { cipCardOffloadConfigEntry 3 }

cipCardOffloadConfigHostName OBJECT-TYPE
    SYNTAX DisplayString(SIZE(1..10))
--    Rsyntax OCTET STRING(SIZE(1..10))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Host name parameter as specified in the DEVICE statement
         of the PROFILE TCPIP."
    ::= { cipCardOffloadConfigEntry 4 }

cipCardOffloadConfigRouterName OBJECT-TYPE
    SYNTAX DisplayString(SIZE(1..10))
--    Rsyntax OCTET STRING(SIZE(1..10))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Workstation name parameter as specified in the DEVICE 
         statement of the mainframe PROFILE TCPIP."
    ::= { cipCardOffloadConfigEntry 5 }

cipCardOffloadConfigLinkHostAppl OBJECT-TYPE
    SYNTAX DisplayString(SIZE(1..10))
--    Rsyntax OCTET STRING(SIZE(1..10))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Name of the application providing the IP link services, 
         as specified in the mainframe configuration."
    ::= { cipCardOffloadConfigEntry 6 }

cipCardOffloadConfigLinkRouterAppl OBJECT-TYPE
    SYNTAX DisplayString(SIZE(1..10))
--    Rsyntax OCTET STRING(SIZE(1..10))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Name of the router application providing the IP link
         services, as specified in the mainframe configuration."
    ::= { cipCardOffloadConfigEntry 7 }

cipCardOffloadConfigAPIHostAppl OBJECT-TYPE
    SYNTAX DisplayString(SIZE(1..10))
--    Rsyntax OCTET STRING(SIZE(1..10))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Name of the mainframe application providing the API
         services, as specified in the mainframe configuration."
    ::= { cipCardOffloadConfigEntry 8 }

cipCardOffloadConfigAPIRouterAppl OBJECT-TYPE
    SYNTAX DisplayString(SIZE(1..10))
--    Rsyntax OCTET STRING(SIZE(1..10))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Name of the router application providing the API services,
         as specified in the mainframe configuration."
    ::= { cipCardOffloadConfigEntry 9 }

cipCardOffloadConfigBroadcastEnable OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Control processing of broadcast frames for the 
        path/device this instance of OFFLOAD is configured
        on. Enable turns broadcast processing on."
    ::= { cipCardOffloadConfigEntry 10 }

cipCardOffloadConfigRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object is used by a management station to
         create or delete the row entry in
         cipCardOffloadConfigTable following the RowStatus
         textual convention."
    ::= { cipCardOffloadConfigEntry 11 }

ciscoTcpOffloadGroup OBJECT IDENTIFIER ::= { ciscoTcpOffloadMibGroups 1 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects providing configuration capability.
--  objects
--    cipCardOffloadConfigPath, cipCardOffloadConfigDevice, 
--    cipCardOffloadConfigIpAddr, cipCardOffloadConfigHostName, 
--    cipCardOffloadConfigRouterName, 
--    cipCardOffloadConfigLinkHostAppl, 
--    cipCardOffloadConfigLinkRouterAppl, 
--    cipCardOffloadConfigAPIHostAppl, 
--    cipCardOffloadConfigAPIRouterAppl, 
--    cipCardOffloadConfigBroadcastEnable, 
--    cipCardOffloadConfigRowStatus

ciscoTcpOffloadMibCompliance OBJECT IDENTIFIER ::= { ciscoTcpOffloadMibCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    The compliance statement for the TcpIP Offload feature.
--  Module
--    >>current<<
--   MandGroup
--    ciscoTcpOffloadGroup


END