-- MIB file created 21-Jan-2006 22:36:05, by
--   SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com

CISCO-VOICE-ATM-DIAL-CONTROL-MIB DEFINITIONS ::= BEGIN

-- From file: "CISCO-VOICE-ATM-DIAL-CONTROL-MIB.my"
-- Compile options "4 7 F H N O W 03 06 0B 0G 0N 0T"

IMPORTS
    DisplayString, TruthValue
            FROM SNMPv2-TC-v1
    CvcSpeechCoderRate, CvcFaxTransmitRate, CvcGUid, 
    CvcInBandSignaling
            FROM CISCO-VOICE-COMMON-DIAL-CONTROL-MIB
    callActiveSetupTime, callActiveIndex
            FROM DIAL-CONTROL-MIB
    cCallHistoryIndex
            FROM CISCO-DIAL-CONTROL-MIB
    ifIndex
            FROM IF-MIB
    ciscoExperiment
            FROM CISCO-SMI
    OBJECT-TYPE
            FROM RFC-1212;

ciscoVoiceAtmDialControlMIB OBJECT IDENTIFIER ::= { ciscoExperiment 35 }
-- MODULE-IDENTITY
--  LastUpdated
--    200211170000Z
--  OrgName
--    Cisco Systems, Inc.
--  ContactInfo
--           Cisco Systems
--            Customer Service
--    
--    Postal: 170 W. Tasman Drive
--            San Jose, CA  95134
--            USA
--    
--    Tel: +1 800 553-NETS
--    
--    E-mail: cs-voice@cisco.com
--  Descr
--    This MIB module enhances the IETF Dial Control MIB
--     (RFC2128) by providing ATM management information over a
--     data network.
--  RevDate
--    200211170000Z
--  RevDescr
--    Modify the following objects:
--     [1] Add a new enum definition in CvAtmSessionProtocol
--     [2] Change the default value in
--         cvAtmPeerCfgInBandSignaling
--  RevDate
--    9903200000Z
--  RevDescr
--    Add new objects for handling the following:
--     [1] Call History object ids 6-17 to bring MIB inline with
--         stored Call History record.
--     [2] Added Call Active Entry objects
--     [3] Added Dialpeer Objects for VoATM 

ciscoVoiceAtmDialControlMIBObjects OBJECT IDENTIFIER ::= { ciscoVoiceAtmDialControlMIB 1 }
cvAtmCallHistory OBJECT IDENTIFIER ::= { ciscoVoiceAtmDialControlMIBObjects 1 }
cvAtmCallActive OBJECT IDENTIFIER ::= { ciscoVoiceAtmDialControlMIBObjects 2 }
cvAtmDialPeer   OBJECT IDENTIFIER ::= { ciscoVoiceAtmDialControlMIBObjects 3 }
ciscoVoiceAtmDialControlMIBNotificationPrefix OBJECT IDENTIFIER ::= { ciscoVoiceAtmDialControlMIB 2 }
ciscoVoiceAtmDialControlMIBNotifications OBJECT IDENTIFIER ::= { ciscoVoiceAtmDialControlMIBNotificationPrefix 0 }
ciscoVoiceAtmDialControlMIBConformance OBJECT IDENTIFIER ::= { ciscoVoiceAtmDialControlMIB 3 }
ciscoVoiceAtmDialControlMIBCompliances OBJECT IDENTIFIER ::= { ciscoVoiceAtmDialControlMIBConformance 1 }
ciscoVoiceAtmDialControlMIBGroups OBJECT IDENTIFIER ::= { ciscoVoiceAtmDialControlMIBConformance 2 }

CvAtmSessionProtocol ::= INTEGER {
        other(1),
        ciscoSwitched(2),
        aal2Trunk(3)
        }
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    Represents a Session Protocol used by Voice calls between a
--     local and remote router via the ATM backbone.
--    
--     other          - none of the following.
--     ciscoSwitched  - cisco proprietary ATM session protocol.

cvAtmCallHistoryTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CvAtmCallHistoryEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table is the ATM extension to the call history
         table of IETF Dial Control MIB. It contains ATM call
         leg information about specific voice over ATM call."
    ::= { cvAtmCallHistory 1 }

cvAtmCallHistoryEntry OBJECT-TYPE
    SYNTAX CvAtmCallHistoryEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The information regarding a single ATM call leg.
         An entry of this table is created when its associated call
         history entry in the IETF Dial Control MIB is created and
         the call history entry contains information for the call
         establishment to the peer on the data network backbone via
         a voice over ATM peer.
         Th the IETF Dial Control MIB is deleted."
    INDEX { cCallHistoryIndex }
    ::= { cvAtmCallHistoryTable 1 }

CvAtmCallHistoryEntry ::= SEQUENCE {
    cvAtmCallHistoryConnectionId CvcGUid,
    cvAtmCallHistoryVpi INTEGER,
    cvAtmCallHistoryVci INTEGER,
    cvAtmCallHistoryLowerIfName DisplayString,
    cvAtmCallHistorySessionTarget DisplayString,
    cvAtmCallHistorySubchannelID INTEGER,
    cvAtmCallHistorySessionProtocol CvAtmSessionProtocol,
    cvAtmCallHistoryCalledNumber DisplayString,
    cvAtmCallHistoryDtmfRelay TruthValue,
    cvAtmCallHistoryUseSeqNumbers TruthValue
    }

cvAtmCallHistoryConnectionId OBJECT-TYPE
    SYNTAX CvcGUid
--    Rsyntax OCTET STRING(SIZE(0..16))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The global call identifier for the ATM call."
    ::= { cvAtmCallHistoryEntry 1 }

cvAtmCallHistoryVpi OBJECT-TYPE
    SYNTAX INTEGER(0..4095)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The VPI used for this ATM connection."
    ::= { cvAtmCallHistoryEntry 2 }

cvAtmCallHistoryVci OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The VCI used for this ATM connection."
    ::= { cvAtmCallHistoryEntry 3 }

cvAtmCallHistoryLowerIfName OBJECT-TYPE
    SYNTAX DisplayString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The ifName of the ATM interface associated with this
         call."
    ::= { cvAtmCallHistoryEntry 4 }

cvAtmCallHistorySessionTarget OBJECT-TYPE
    SYNTAX DisplayString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The object indicates the session target of the peer that
         was used for the voice over ATM call. A zero length string
         indicates that the value is unavailable."
    ::= { cvAtmCallHistoryEntry 5 }

cvAtmCallHistorySubchannelID OBJECT-TYPE
    SYNTAX INTEGER(0..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The subchannel used for this ATM connection."
    ::= { cvAtmCallHistoryEntry 6 }

cvAtmCallHistorySessionProtocol OBJECT-TYPE
    SYNTAX CvAtmSessionProtocol
--    Rsyntax INTEGER {
--        other(1),
--        ciscoSwitched(2),
--        aal2Trunk(3)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the session protocol used on this call."
    ::= { cvAtmCallHistoryEntry 7 }

cvAtmCallHistoryCalledNumber OBJECT-TYPE
    SYNTAX DisplayString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the called party number for trunk connection
         calls. A zero length string indicates that this data is
         unavailable."
    ::= { cvAtmCallHistoryEntry 8 }

cvAtmCallHistoryDtmfRelay OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates if Dtmf Relay was enabled for the call."
    ::= { cvAtmCallHistoryEntry 9 }

cvAtmCallHistoryUseSeqNumbers OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates if Sequence Numbers were used on the voice
         data packets."
    ::= { cvAtmCallHistoryEntry 10 }

cvAtmCallActiveTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CvAtmCallActiveEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table is the ATM extension to the active call
         table of IETF Dial Control MIB. It contains ATM call
         leg information about specific voice over ATM call."
    ::= { cvAtmCallActive 1 }

cvAtmCallActiveEntry OBJECT-TYPE
    SYNTAX CvAtmCallActiveEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The information regarding a single ATM call leg.
         An entry of this table is created when its associated call
         active entry in the IETF Dial Control MIB is created. The
         call active entry contains information for the call
         establishment to the peer on the data network backbone via
         a voice over ATM peer.
         The entry is deleted when its associated call active entry
         in the IETF Dial Control MIB is deleted."
    INDEX { callActiveSetupTime, callActiveIndex }
    ::= { cvAtmCallActiveTable 1 }

CvAtmCallActiveEntry ::= SEQUENCE {
    cvAtmCallActiveConnectionId CvcGUid,
    cvAtmCallActiveVpi INTEGER,
    cvAtmCallActiveVci INTEGER,
    cvAtmCallActiveLowerIfName DisplayString,
    cvAtmCallActiveSessionTarget DisplayString,
    cvAtmCallActiveSubchannelID INTEGER,
    cvAtmCallActiveSessionProtocol CvAtmSessionProtocol,
    cvAtmCallActiveCalledNumber DisplayString,
    cvAtmCallActiveDtmfRelay TruthValue,
    cvAtmCallActiveUseSeqNumbers TruthValue
    }

cvAtmCallActiveConnectionId OBJECT-TYPE
    SYNTAX CvcGUid
--    Rsyntax OCTET STRING(SIZE(0..16))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The global call identifier for the ATM call."
    ::= { cvAtmCallActiveEntry 1 }

cvAtmCallActiveVpi OBJECT-TYPE
    SYNTAX INTEGER(0..4095)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The VPI used for this ATM connection."
    ::= { cvAtmCallActiveEntry 2 }

cvAtmCallActiveVci OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The VCI used for this ATM connection."
    ::= { cvAtmCallActiveEntry 3 }

cvAtmCallActiveLowerIfName OBJECT-TYPE
    SYNTAX DisplayString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The ifName of the ATM interface associated  with this
         call."
    ::= { cvAtmCallActiveEntry 4 }

cvAtmCallActiveSessionTarget OBJECT-TYPE
    SYNTAX DisplayString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The object indicates the session target of the peer
         that is used for the voice over ATM call. A null string
         indicates that the value is unavailable."
    ::= { cvAtmCallActiveEntry 5 }

cvAtmCallActiveSubchannelID OBJECT-TYPE
    SYNTAX INTEGER(0..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The subchannel used for this ATM connection."
    ::= { cvAtmCallActiveEntry 6 }

cvAtmCallActiveSessionProtocol OBJECT-TYPE
    SYNTAX CvAtmSessionProtocol
--    Rsyntax INTEGER {
--        other(1),
--        ciscoSwitched(2),
--        aal2Trunk(3)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the session protocol being used on this call."
    ::= { cvAtmCallActiveEntry 7 }

cvAtmCallActiveCalledNumber OBJECT-TYPE
    SYNTAX DisplayString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the called party number for trunk connection
         calls. A null string indicates that this data is
         unavailable."
    ::= { cvAtmCallActiveEntry 8 }

cvAtmCallActiveDtmfRelay OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates if Dtmf Relay is enabled for the call."
    ::= { cvAtmCallActiveEntry 9 }

cvAtmCallActiveUseSeqNumbers OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates if Sequence Numbers are used on the voice data
         packets."
    ::= { cvAtmCallActiveEntry 10 }

cvAtmPeerCfgTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CvATMPeerCfgEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The table contains the Voice over ATM (ATM) peer specific
         information that is required to accept or place voice calls
         via the ATM backbone with the session protocol specified
         in cvAtmPeerCfgSessionProtocol."
    ::= { cvAtmDialPeer 1 }

cvAtmPeerCfgEntry OBJECT-TYPE
    SYNTAX CvATMPeerCfgEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A single ATM specific Peer. One entry per ATM
         encapsulation. The entry is created when its associated
         'voiceOverATM(152)' encapsulation ifEntry is created.
         This entry is deleted when its associated ifEntry
         is deleted."
    INDEX { ifIndex }
    ::= { cvAtmPeerCfgTable 1 }

CvATMPeerCfgEntry ::= SEQUENCE {
    cvAtmPeerCfgSessionProtocol CvAtmSessionProtocol,
    cvAtmPeerCfgInterfaceName DisplayString,
    cvAtmPeerCfgVpi INTEGER,
    cvAtmPeerCfgVci INTEGER,
    cvAtmPeerCfgVcName DisplayString,
    cvAtmPeerCfgCoderRate CvcSpeechCoderRate,
    cvAtmPeerCfgCodecBytes INTEGER,
    cvAtmPeerCfgFaxRate CvcFaxTransmitRate,
    cvAtmPeerCfgFaxBytes INTEGER,
    cvAtmPeerCfgInBandSignaling CvcInBandSignaling,
    cvAtmPeerCfgVADEnable TruthValue,
    cvAtmPeerCfgUseSeqNumbers TruthValue,
    cvAtmPeerCfgDtmfRelay TruthValue
    }

cvAtmPeerCfgSessionProtocol OBJECT-TYPE
    SYNTAX CvAtmSessionProtocol
--    Rsyntax INTEGER {
--        other(1),
--        ciscoSwitched(2),
--        aal2Trunk(3)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The object specifies the session protocol to be used
         for Internet call between local and remote router via
         ATM backbone."
    DEFVAL { ciscoSwitched }
    ::= { cvAtmPeerCfgEntry 1 }

cvAtmPeerCfgInterfaceName OBJECT-TYPE
    SYNTAX DisplayString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The object specifies the ifName on which the call will go
         out.
         A zero length string indicates that no interface has been
         assigned."
    DEFVAL { "" }
    ::= { cvAtmPeerCfgEntry 2 }

cvAtmPeerCfgVpi OBJECT-TYPE
    SYNTAX INTEGER(0..4095)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The VPI used for this ATM connection."
    DEFVAL { 0 }
    ::= { cvAtmPeerCfgEntry 3 }

cvAtmPeerCfgVci OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The VCI used for this ATM connection."
    DEFVAL { 0 }
    ::= { cvAtmPeerCfgEntry 4 }

cvAtmPeerCfgVcName OBJECT-TYPE
    SYNTAX DisplayString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The VC Name used for this ATM connection."
    DEFVAL { "" }
    ::= { cvAtmPeerCfgEntry 5 }

cvAtmPeerCfgCoderRate OBJECT-TYPE
    SYNTAX CvcSpeechCoderRate
--    Rsyntax INTEGER {
--        g729r8000(1),
--        g729Ar8000(2),
--        g726r16000(3),
--        g726r24000(4),
--        g726r32000(5),
--        g711ulawr64000(6),
--        g711Alawr64000(7),
--        g728r16000(8),
--        g723r6300(9),
--        g723r5300(10),
--        gsmr13200(11),
--        g729Br8000(12),
--        g729ABr8000(13),
--        g723Ar6300(14),
--        g723Ar5300(15),
--        g729IETFr8000(16),
--        gsmeEr12200(17),
--        clearChannel(18),
--        g726r40000(19),
--        llcc(20),
--        gsmAmrNb(21)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the default voice coder rate of
         speech for the ATM peer."
    DEFVAL { g729Ar8000 }
    ::= { cvAtmPeerCfgEntry 6 }

cvAtmPeerCfgCodecBytes OBJECT-TYPE
    SYNTAX INTEGER(0..240)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the payload size for the voice
         packets to be transmitted during the call."
    DEFVAL { 30 }
    ::= { cvAtmPeerCfgEntry 7 }

cvAtmPeerCfgFaxRate OBJECT-TYPE
    SYNTAX CvcFaxTransmitRate
--    Rsyntax INTEGER {
--        none(1),
--        voiceRate(2),
--        fax2400(3),
--        fax4800(4),
--        fax7200(5),
--        fax9600(6),
--        fax14400(7),
--        fax12000(8)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the default transmit rate of FAX
         for the ATM peer. If the value of this object is 'none',
         then the Fax relay feature is disabled; otherwise the
         Fax relay feature is enabled."
    DEFVAL { voiceRate }
    ::= { cvAtmPeerCfgEntry 8 }

cvAtmPeerCfgFaxBytes OBJECT-TYPE
    SYNTAX INTEGER(0..240)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the payload size for the fax
         packets to be transmitted during the call."
    DEFVAL { 30 }
    ::= { cvAtmPeerCfgEntry 9 }

cvAtmPeerCfgInBandSignaling OBJECT-TYPE
    SYNTAX CvcInBandSignaling
--    Rsyntax INTEGER {
--        cas(1),
--        none(2),
--        cept(3),
--        transparent(4),
--        gr303(5)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the type of in-band signaling
         used between the two end points of the call and is used
         by the router to determine how to interpret the ABCD
         signaling bits sent as part of the voice payload data."
    DEFVAL { cas }
    ::= { cvAtmPeerCfgEntry 10 }

cvAtmPeerCfgVADEnable OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies whether or not VAD (Voice Activity
         Detection) is enabled. If the object value is 'false',
         then the voice data is continuously transmitted to
         ATM backbone."
    DEFVAL { true }
    ::= { cvAtmPeerCfgEntry 11 }

cvAtmPeerCfgUseSeqNumbers OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies whether or not Sequence Numbers are
         generated on voice packets."
    DEFVAL { false }
    ::= { cvAtmPeerCfgEntry 12 }

cvAtmPeerCfgDtmfRelay OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies whether or not Dtmf Relay is enabled.
         If it is then dtmf digits are transported as FRF11 Annex
         C packets, instead of being encoded as speech."
    DEFVAL { false }
    ::= { cvAtmPeerCfgEntry 13 }

cvAtmCallHistoryGroup OBJECT IDENTIFIER ::= { ciscoVoiceAtmDialControlMIBGroups 1 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects providing the ATM Call History
--     entry capability.
--  objects
--    cvAtmCallHistoryConnectionId, cvAtmCallHistoryVpi, 
--    cvAtmCallHistoryVci, cvAtmCallHistoryLowerIfName, 
--    cvAtmCallHistorySessionTarget, cvAtmCallHistorySubchannelID, 
--    cvAtmCallHistorySessionProtocol, cvAtmCallHistoryCalledNumber, 
--    cvAtmCallHistoryDtmfRelay, cvAtmCallHistoryUseSeqNumbers

cvAtmCallActiveGroup OBJECT IDENTIFIER ::= { ciscoVoiceAtmDialControlMIBGroups 2 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects providing the ATM Call Active
--     entry capability.
--  objects
--    cvAtmCallActiveConnectionId, cvAtmCallActiveVpi, 
--    cvAtmCallActiveVci, cvAtmCallActiveLowerIfName, 
--    cvAtmCallActiveSessionTarget, cvAtmCallActiveSubchannelID, 
--    cvAtmCallActiveSessionProtocol, cvAtmCallActiveCalledNumber, 
--    cvAtmCallActiveDtmfRelay, cvAtmCallActiveUseSeqNumbers

cvAtmPeerCfgGroup OBJECT IDENTIFIER ::= { ciscoVoiceAtmDialControlMIBGroups 3 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects providing the ATM Dialpeer
--     capability. These objects have been implemented as
--     read-only.
--  objects
--    cvAtmPeerCfgSessionProtocol, cvAtmPeerCfgInterfaceName, 
--    cvAtmPeerCfgVpi, cvAtmPeerCfgVci, cvAtmPeerCfgVcName, 
--    cvAtmPeerCfgCoderRate, cvAtmPeerCfgCodecBytes, 
--    cvAtmPeerCfgFaxRate, cvAtmPeerCfgFaxBytes, 
--    cvAtmPeerCfgInBandSignaling, cvAtmPeerCfgVADEnable, 
--    cvAtmPeerCfgUseSeqNumbers, cvAtmPeerCfgDtmfRelay

ciscoVoiceAtmDialControlMIBCompliance OBJECT IDENTIFIER ::= { ciscoVoiceAtmDialControlMIBCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    The compliance statement for entities which
--     implement the CISCO VOICE ATM DIAL CONTROL MIB
--  Module
--    >>current<<
--   MandGroup
--    cvAtmCallHistoryGroup
--   MandGroup
--    cvAtmCallActiveGroup
--   MandGroup
--    cvAtmPeerCfgGroup
--   ObjVar
--    cvAtmPeerCfgSessionProtocol
--   ObjVar
--    cvAtmPeerCfgInterfaceName
--   ObjVar
--    cvAtmPeerCfgVpi
--   ObjVar
--    cvAtmPeerCfgVci
--   ObjVar
--    cvAtmPeerCfgVcName
--   ObjVar
--    cvAtmPeerCfgCoderRate
--   ObjVar
--    cvAtmPeerCfgCodecBytes
--   ObjVar
--    cvAtmPeerCfgFaxRate
--   ObjVar
--    cvAtmPeerCfgFaxBytes
--   ObjVar
--    cvAtmPeerCfgInBandSignaling
--   ObjVar
--    cvAtmPeerCfgVADEnable
--   ObjVar
--    cvAtmPeerCfgUseSeqNumbers
--   ObjVar
--    cvAtmPeerCfgDtmfRelay


END