-- MIB created 9/05/100 11:41:19, by -- SMIC (the next generation) version 1.6.29, November 22, 1994. CISCO-VOICE-ENABLED-LINK-MIB DEFINITIONS ::= BEGIN -- From file: "CISCO-VOICE-ENABLED-LINK-MIB.my" IMPORTS OBJECT-TYPE FROM RFC-1212 DisplayString, MacAddress FROM SNMPv2-TC-v1 ciscoExperiment FROM CISCO-SMI; ciscoVoiceEnabledLinkMIB OBJECT IDENTIFIER ::= { ciscoExperiment 53 } -- MODULE-IDENTITY -- LastUpdated -- 9905070000Z -- OrgName -- Cisco Systems, Inc. -- ContactInfo -- Cisco Systems -- Customer Service -- -- Postal: 170 W. Tasman Drive -- San Jose, CA 95134 -- USA -- -- Tel: +1 800 553-NETS -- -- E-mail: cs-voice@cisco.com -- Descr -- This MIB module provides information about Voice Enabled -- ATM and Frame Relay Links used by the Cisco Switched -- voice protocol. -- The Cisco Switched voice protocol passes the default MAC -- address for its node to the next node in the path, in both -- call setup messages and keepalive requests and responses. -- This MAC address is stored at the remote node to identify -- where the incoming pvc originates. This information is then -- used by the Cisco Voice Manager Application to determine -- the voice network topology. cvenabledlinkMIBObjects OBJECT IDENTIFIER ::= { ciscoVoiceEnabledLinkMIB 1 } cvEnabledLink OBJECT IDENTIFIER ::= { cvenabledlinkMIBObjects 1 } ciscoVoiceEnabledLinkMIBNotificationPrefix OBJECT IDENTIFIER ::= { ciscoVoiceEnabledLinkMIB 2 } ciscoVoiceEnabledLinkMIBNotifications OBJECT IDENTIFIER ::= { ciscoVoiceEnabledLinkMIBNotificationPrefix 0 } ciscoVoiceEnabledlinkMIBConformance OBJECT IDENTIFIER ::= { ciscoVoiceEnabledLinkMIB 3 } ciscoVoiceEnabledlinkMIBCompliances OBJECT IDENTIFIER ::= { ciscoVoiceEnabledlinkMIBConformance 1 } ciscoVoiceEnabledlinkMIBGroups OBJECT IDENTIFIER ::= { ciscoVoiceEnabledlinkMIBConformance 2 } cvEnabledDefaultMacAddr OBJECT-TYPE SYNTAX MacAddress -- Rsyntax OCTET STRING(SIZE(6)) ACCESS read-only STATUS mandatory DESCRIPTION "This item defines the Default MAC Address used by this node in call set up messages, keepalive requests and responses." ::= { cvEnabledLink 1 } cvEnabledLinkTable OBJECT-TYPE SYNTAX SEQUENCE OF CvEnabledLinkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains information about ATM and Frame Relay Links used by voice over ATM and voice over Frame Relay calls." ::= { cvEnabledLink 2 } cvEnabledLinkEntry OBJECT-TYPE SYNTAX CvEnabledLinkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The information regarding a single ATM or Frame Relay Link. An entry of this table is created when its associated pvc is enabled for carrying Cisco Switched voice traffic. The entry is deleted when its associated pvc is no longer enabled for Cisco Switched voice traffic." INDEX { cvEnabledLinkIndex } ::= { cvEnabledLinkTable 1 } CvEnabledLinkEntry ::= SEQUENCE { cvEnabledLinkIndex INTEGER, cvEnabledLinkType INTEGER, cvEnabledLinkInterfaceName DisplayString, cvEnabledLinkVpiDlci INTEGER, cvEnabledLinkVci INTEGER, cvEnabledLinkRemoteMacAddr MacAddress } cvEnabledLinkIndex OBJECT-TYPE SYNTAX INTEGER(0..2147483648) ACCESS read-only STATUS mandatory DESCRIPTION "A monotonically increasing number, starting from zero, that is assigned to each link that is currently configured to carry Cisco Switched voice traffic. If a link is later unconfigured for voice traffic, the number assigned to it will not be reused. When the maximum value is reached, the value will wrap to zero and use a currently unassigned value." ::= { cvEnabledLinkEntry 1 } cvEnabledLinkType OBJECT-TYPE SYNTAX INTEGER { atm(1), framerelay(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The object defines the type of link, either ATM or Frame Relay." ::= { cvEnabledLinkEntry 2 } cvEnabledLinkInterfaceName OBJECT-TYPE SYNTAX DisplayString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The object specifies the iFName of the peer interface that is used for the voice over ATM/FR call. A zero length string indicates that the value is unavailable." ::= { cvEnabledLinkEntry 3 } cvEnabledLinkVpiDlci OBJECT-TYPE SYNTAX INTEGER(0..4095) ACCESS read-only STATUS mandatory DESCRIPTION "The VPI or DLCI used for this ATM/Frame Relay connection." ::= { cvEnabledLinkEntry 4 } cvEnabledLinkVci OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The VCI used, if it is an ATM connection." ::= { cvEnabledLinkEntry 5 } cvEnabledLinkRemoteMacAddr OBJECT-TYPE SYNTAX MacAddress -- Rsyntax OCTET STRING(SIZE(6)) ACCESS read-only STATUS mandatory DESCRIPTION "The default MAC address of the node at the other end of the link." ::= { cvEnabledLinkEntry 6 } cvEnabledMacAddrGroup OBJECT IDENTIFIER ::= { ciscoVoiceEnabledlinkMIBGroups 1 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing the Default Mac -- Address capability. -- objects -- cvEnabledDefaultMacAddr cvEnabledLinkGroup OBJECT IDENTIFIER ::= { ciscoVoiceEnabledlinkMIBGroups 2 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing the Voice Enabled Link -- entry capability. -- objects -- cvEnabledLinkIndex, cvEnabledLinkType, -- cvEnabledLinkInterfaceName, cvEnabledLinkVpiDlci, -- cvEnabledLinkVci, cvEnabledLinkRemoteMacAddr ciscoVoiceEnabledlinkMIBCompliance OBJECT IDENTIFIER ::= { ciscoVoiceEnabledlinkMIBCompliances 1 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- The compliance statement for entities which -- implement the CISCO VOICE ENABLED LINK MIB -- Module -- >>current<< -- MandGroup -- cvEnabledMacAddrGroup -- MandGroup -- cvEnabledLinkGroup END