-- MIB file created 15-Mar-2001 10:54:40, by -- SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com APPN-DLUR-MIB DEFINITIONS ::= BEGIN -- From file: "DLUR-MIB.my" -- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T" IMPORTS DisplayString, TruthValue FROM SNMPv2-TC-v1 snanauMIB FROM SNA-NAU-MIB SnaControlPointName FROM APPN-MIB Gauge FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212; dlurMIB OBJECT IDENTIFIER ::= { snanauMIB 5 } -- MODULE-IDENTITY -- LastUpdated -- 9705101500Z -- OrgName -- IETF SNA NAU MIB WG / AIW APPN/HPR MIBs SIG -- ContactInfo -- -- Bob Clouston -- Cisco Systems -- 7025 Kit Creek Road -- P.O. Box 14987 -- Research Triangle Park, NC 27709, USA -- Tel: 1 919 472 2333 -- E-mail: clouston@cisco.com -- -- Bob Moore -- IBM Corporation -- 800 Park Offices Drive -- RHJA/664 -- P.O. Box 12195 -- Research Triangle Park, NC 27709, USA -- Tel: 1 919 254 4436 -- E-mail: remoore@ralvm6.vnet.ibm.com -- Descr -- This is the MIB module for objects used to manage -- network devices with DLUR capabilities. This MIB -- contains information that is useful for managing an APPN -- product that implements a DLUR (Dependent Logical Unit -- Requester). The DLUR product has a client/server -- relationship with an APPN product that implements a DLUS -- (Dependent Logical Unit Server). dlurObjects OBJECT IDENTIFIER ::= { dlurMIB 1 } dlurNodeInfo OBJECT IDENTIFIER ::= { dlurObjects 1 } dlurNodeCapabilities OBJECT IDENTIFIER ::= { dlurNodeInfo 1 } dlurPuInfo OBJECT IDENTIFIER ::= { dlurObjects 2 } dlurDlusInfo OBJECT IDENTIFIER ::= { dlurObjects 3 } dlurConformance OBJECT IDENTIFIER ::= { dlurMIB 2 } dlurCompliances OBJECT IDENTIFIER ::= { dlurConformance 1 } dlurGroups OBJECT IDENTIFIER ::= { dlurConformance 2 } dlurNodeCpName OBJECT-TYPE SYNTAX SnaControlPointName -- Rsyntax OCTET STRING(SIZE(3..17)) ACCESS read-only STATUS mandatory DESCRIPTION "Administratively assigned network name for the APPN node where this DLUR implementation resides. If this object has the same value as the appnNodeCpName object in the APPN MIB, then the two objects are referring to the same APPN node." ::= { dlurNodeCapabilities 1 } dlurReleaseLevel OBJECT-TYPE SYNTAX DisplayString(SIZE(2)) -- Rsyntax OCTET STRING(SIZE(2)) ACCESS read-only STATUS mandatory DESCRIPTION "The DLUR release level of this implementation. This is the value that is encoded in the DLUR/DLUS Capabilites (CV 51). To insure consistent display, this one-byte value is encoded here as two displayable characters that are equivalent to a hexadecimal display. For example, if the one-byte value as encoded in CV51 is X'01', this object will contain the displayable string '01'." ::= { dlurNodeCapabilities 2 } dlurAnsSupport OBJECT-TYPE SYNTAX INTEGER { continueOrStop(1), stopOnly(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Automatic Network Shutdown (ANS) capability of this node. - 'continueOrStop' indicates that the DLUR implementation supports either ANS value (continue or stop) as specified by the DLUS on ACTPU for each PU. - 'stopOnly' indicates that the DLUR implementation only supports the ANS value of stop. ANS = continue means that the DLUR node will keep LU-LU sessions active even if SSCP-PU and SSCP-LU control sessions are interrupted. ANS = stop means that LU-LU sessions will be interrupted when the SSCP-PU and SSCP-LU sessions are interrupted." ::= { dlurNodeCapabilities 3 } dlurMultiSubnetSupport OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indication of whether this DLUR implementation can support CPSVRMGR sessions that cross NetId boundaries." ::= { dlurNodeCapabilities 4 } dlurDefaultDefPrimDlusName OBJECT-TYPE SYNTAX SnaControlPointName -- Rsyntax OCTET STRING(SIZE(3..17)) ACCESS read-only STATUS mandatory DESCRIPTION "The SNA name of the defined default primary DLUS for all of the PUs served by this DLUR. This can be overridden for a particular PU by a defined primary DLUS for that PU, represented by the dlurPuDefPrimDlusName object." ::= { dlurNodeCapabilities 5 } dlurNetworkNameForwardingSupport OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indication of whether this DLUR implementation supports forwarding of Network Name control vectors on ACTPUs and ACTLUs to DLUR-served PUs and their associated LUs. This object corresponds to byte 9. bit 3 of cv51." ::= { dlurNodeCapabilities 6 } dlurNondisDlusDlurSessDeactSup OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indication of whether this DLUR implementation supports nondisruptive deactivation of its DLUR-DLUS sessions. Upon receiving from a DLUS an UNBIND for the CPSVRMGR pipe with sense data X'08A0 000B', a DLUR that supports this option immediately begins attempting to activate a CPSVRMGR pipe with a DLUS other than the one that sent the UNBIND. This object corresponds to byte 9. bit 4 of cv51." ::= { dlurNodeCapabilities 7 } dlurDefaultDefBackupDlusTable OBJECT-TYPE SYNTAX SEQUENCE OF DlurDefaultDefBackupDlusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains an ordered list of defined backup DLUSs for all of the PUs served by this DLUR. These can be overridden for a particular PU by a list of defined backup DLUSs for that PU, represented by the dlurPuDefBackupDlusNameTable. Entries in this table are ordered from most preferred default backup DLUS to least preferred." ::= { dlurNodeInfo 2 } dlurDefaultDefBackupDlusEntry OBJECT-TYPE SYNTAX DlurDefaultDefBackupDlusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is indexed by an integer-valued index, which orders the entries from most preferred default backup DLUS to least preferred." INDEX { dlurDefaultDefBackupDlusIndex } ::= { dlurDefaultDefBackupDlusTable 1 } DlurDefaultDefBackupDlusEntry ::= SEQUENCE { dlurDefaultDefBackupDlusIndex Gauge, dlurDefaultDefBackupDlusName SnaControlPointName } dlurDefaultDefBackupDlusIndex OBJECT-TYPE SYNTAX Gauge(1..4294967295) ACCESS not-accessible STATUS mandatory DESCRIPTION "Index for this table. The index values start at 1, which identifies the most preferred default backup DLUS." ::= { dlurDefaultDefBackupDlusEntry 1 } dlurDefaultDefBackupDlusName OBJECT-TYPE SYNTAX SnaControlPointName -- Rsyntax OCTET STRING(SIZE(3..17)) ACCESS read-only STATUS mandatory DESCRIPTION "Fully qualified name of a default backup DLUS for PUs served by this DLUR." ::= { dlurDefaultDefBackupDlusEntry 2 } dlurPuTable OBJECT-TYPE SYNTAX SEQUENCE OF DlurPuEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about the PUs supported by this DLUR." ::= { dlurPuInfo 1 } dlurPuEntry OBJECT-TYPE SYNTAX DlurPuEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry in a table of PU information, indexed by PU name." INDEX { dlurPuName } ::= { dlurPuTable 1 } DlurPuEntry ::= SEQUENCE { dlurPuName DisplayString, dlurPuSscpSuppliedName DisplayString, dlurPuStatus INTEGER, dlurPuAnsSupport INTEGER, dlurPuLocation INTEGER, dlurPuLsName DisplayString, dlurPuDlusSessnStatus INTEGER, dlurPuActiveDlusName DisplayString, dlurPuDefPrimDlusName DisplayString } dlurPuName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..17)) -- Rsyntax OCTET STRING(SIZE(1..17)) ACCESS not-accessible STATUS mandatory DESCRIPTION "Locally administered name of the PU." ::= { dlurPuEntry 1 } dlurPuSscpSuppliedName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..17)) -- Rsyntax OCTET STRING(SIZE(0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "The SNA name of the PU. This value is supplied to a PU by the SSCP that activated it. If a value has not been supplied, a zero-length string is returned." ::= { dlurPuEntry 2 } dlurPuStatus OBJECT-TYPE SYNTAX INTEGER { reset(1), pendReqActpuRsp(2), pendActpu(3), pendActpuRsp(4), active(5), pendLinkact(6), pendDactpuRsp(7), pendInop(8), pendInopActpu(9) } ACCESS read-only STATUS mandatory DESCRIPTION "Status of the DLUR-supported PU. The following values are defined: reset(1) - reset pendReqActpuRsp(2) - pending a response from the DLUS to a Request ACTPU pendActpu(3) - pending an ACTPU from the DLUS pendActpuRsp(4) - pending an ACTPU response from the PU active(5) - active pendLinkact(6) - pending activation of the link to a downstream PU pendDactpuRsp(7) - pending a DACTPU response from the PU pendInop(8) - the CPSVRMGR pipe became inoperative while the DLUR was pending an ACTPU response from the PU pendInopActpu(9) - when the DLUR was in the pendInop state, a CPSVRMGR pipe became active and a new ACTPU was received over it, before a response to the previous ACTPU was received from the PU." ::= { dlurPuEntry 3 } dlurPuAnsSupport OBJECT-TYPE SYNTAX INTEGER { continue(1), stop(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The Automatic Network Shutdown (ANS) support configured for this PU. This value (as configured by the network administrator) is sent by DLUS with ACTPU for each PU. - 'continue' means that the DLUR node will attempt to keep LU-LU sessions active even if SSCP-PU and SSCP-LU control sessions are interrupted. - 'stop' means that LU-LU sessions will be interrupted when the SSCP-PU and SSCP-LU sessions are interrupted." ::= { dlurPuEntry 4 } dlurPuLocation OBJECT-TYPE SYNTAX INTEGER { internal(1), downstream(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Location of the DLUR-support PU: internal(1) - internal to the APPN node itself (no link) downstream(2) - downstream of the APPN node (connected via a link)." ::= { dlurPuEntry 5 } dlurPuLsName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..10)) -- Rsyntax OCTET STRING(SIZE(0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "Administratively assigned name of the link station through which a downstream PU is connected to this DLUR. A zero-length string is returned for internal PUs. If this object has the same value as the appnLsName object in the APPN MIB, then the two are identifying the same link station." ::= { dlurPuEntry 6 } dlurPuDlusSessnStatus OBJECT-TYPE SYNTAX INTEGER { reset(1), pendingActive(2), active(3), pendingInactive(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Status of the control session to the DLUS identified in dlurPuActiveDlusName. This is a combination of the separate states for the contention-winner and contention-loser sessions: reset(1) - none of the cases below pendingActive(2) - either contention-winner session or contention-loser session is pending active active(3) - contention-winner and contention-loser sessions are both active pendingInactive(4) - either contention-winner session or contention-loser session is pending inactive - this test is made AFTER the 'pendingActive' test. The following matrix provides a different representation of how the values of this object are related to the individual states of the contention-winner and contention-loser sessions: Conwinner | pA | pI | A | X = !(pA | pI | A) C ++++++++++++++++++++++++++++++++++ o pA | 2 | 2 | 2 | 2 n ++++++++++++++++++++++++++++++++++ l pI | 2 | 4 | 4 | 4 o ++++++++++++++++++++++++++++++++++ s A | 2 | 4 | 3 | 1 e ++++++++++++++++++++++++++++++++++ r X | 2 | 4 | 1 | 1 ++++++++++++++++++++++++++++++++++" ::= { dlurPuEntry 7 } dlurPuActiveDlusName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..17)) -- Rsyntax OCTET STRING(SIZE(0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "The SNA name of the active DLUS for this PU. If its length is not zero, this name follows the SnaControlPointName textual convention. A zero-length string indicates that the PU does not currently have an active DLUS." ::= { dlurPuEntry 8 } dlurPuDefPrimDlusName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..17)) -- Rsyntax OCTET STRING(SIZE(0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "The SNA name of the defined primary DLUS for this PU, if one has been defined. If present, this name follows the SnaControlPointName textual convention. A zero-length string indicates that no primary DLUS has been defined for this PU, in which case the global default represented by the dlurDefaultDefPrimDlusName object is used." ::= { dlurPuEntry 9 } dlurPuDefBackupDlusTable OBJECT-TYPE SYNTAX SEQUENCE OF DlurPuDefBackupDlusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains an ordered list of defined backup DLUSs for those PUs served by this DLUR that have their own defined backup DLUSs. PUs that have no entries in this table use the global default backup DLUSs for the DLUR, represented by the dlurDefaultDefBackupDlusNameTable. Entries in this table are ordered from most preferred backup DLUS to least preferred for each PU." ::= { dlurPuInfo 2 } dlurPuDefBackupDlusEntry OBJECT-TYPE SYNTAX DlurPuDefBackupDlusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is indexed by PU name and by an integer-valued index, which orders the entries from most preferred backup DLUS for the PU to least preferred." INDEX { dlurPuDefBackupDlusPuName, dlurPuDefBackupDlusIndex } ::= { dlurPuDefBackupDlusTable 1 } DlurPuDefBackupDlusEntry ::= SEQUENCE { dlurPuDefBackupDlusPuName DisplayString, dlurPuDefBackupDlusIndex Gauge, dlurPuDefBackupDlusName SnaControlPointName } dlurPuDefBackupDlusPuName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..17)) -- Rsyntax OCTET STRING(SIZE(1..17)) ACCESS not-accessible STATUS mandatory DESCRIPTION "Locally administered name of the PU. If this object has the same value as the dlurPuName object, then the two are identifying the same PU." ::= { dlurPuDefBackupDlusEntry 1 } dlurPuDefBackupDlusIndex OBJECT-TYPE SYNTAX Gauge(1..4294967295) ACCESS not-accessible STATUS mandatory DESCRIPTION "Secondary index for this table. The index values start at 1, which identifies the most preferred backup DLUS for the PU." ::= { dlurPuDefBackupDlusEntry 2 } dlurPuDefBackupDlusName OBJECT-TYPE SYNTAX SnaControlPointName -- Rsyntax OCTET STRING(SIZE(3..17)) ACCESS read-only STATUS mandatory DESCRIPTION "Fully qualified name of a backup DLUS for this PU." ::= { dlurPuDefBackupDlusEntry 3 } dlurDlusTable OBJECT-TYPE SYNTAX SEQUENCE OF DlurDlusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about DLUS control sessions." ::= { dlurDlusInfo 1 } dlurDlusEntry OBJECT-TYPE SYNTAX DlurDlusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry is indexed by the name of the DLUS." INDEX { dlurDlusName } ::= { dlurDlusTable 1 } DlurDlusEntry ::= SEQUENCE { dlurDlusName SnaControlPointName, dlurDlusSessnStatus INTEGER } dlurDlusName OBJECT-TYPE SYNTAX SnaControlPointName -- Rsyntax OCTET STRING(SIZE(3..17)) ACCESS not-accessible STATUS mandatory DESCRIPTION "The SNA name of a DLUS with which this DLUR currently has a CPSVRMGR pipe established." ::= { dlurDlusEntry 1 } dlurDlusSessnStatus OBJECT-TYPE SYNTAX INTEGER { reset(1), pendingActive(2), active(3), pendingInactive(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Status of the CPSVRMGR pipe between the DLUR and this DLUS. This is a combination of the separate states for the contention-winner and contention-loser sessions: reset(1) - none of the cases below pendingActive(2) - either contention-winner session or contention-loser session is pending active active(3) - contention-winner and contention-loser sessions are both active pendingInactive(4) - either contention-winner session or contention-loser session is pending inactive - this test is made AFTER the 'pendingActive' test. The following matrix provides a different representation of how the values of this object are related to the individual states of the contention-winner and contention-loser sessions: Conwinner | pA | pI | A | X = !(pA | pI | A) C ++++++++++++++++++++++++++++++++++ o pA | 2 | 2 | 2 | 2 n ++++++++++++++++++++++++++++++++++ l pI | 2 | 4 | 4 | 4 o ++++++++++++++++++++++++++++++++++ s A | 2 | 4 | 3 | 1 e ++++++++++++++++++++++++++++++++++ r X | 2 | 4 | 1 | 1 ++++++++++++++++++++++++++++++++++" ::= { dlurDlusEntry 2 } dlurConfGroup OBJECT IDENTIFIER ::= { dlurGroups 1 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing information on an -- implementation of APPN DLUR. -- objects -- dlurNodeCpName, dlurReleaseLevel, dlurAnsSupport, -- dlurMultiSubnetSupport, dlurNetworkNameForwardingSupport, -- dlurNondisDlusDlurSessDeactSup, dlurDefaultDefPrimDlusName, -- dlurDefaultDefBackupDlusName, dlurPuSscpSuppliedName, -- dlurPuStatus, dlurPuAnsSupport, dlurPuLocation, dlurPuLsName, -- dlurPuDlusSessnStatus, dlurPuActiveDlusName, -- dlurPuDefPrimDlusName, dlurPuDefBackupDlusName, -- dlurDlusSessnStatus dlurCompliance OBJECT IDENTIFIER ::= { dlurCompliances 1 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- The compliance statement for the SNMPv2 entities which -- implement the DLUR MIB. -- Module -- >>current<< -- MandGroup -- dlurConfGroup END