-- MIB file created 24-Mar-2009 12:26:54, by
--   SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com

DOCS-TEST-MIB DEFINITIONS ::= BEGIN

-- From file: "DOCS-TEST-MIB.my"
-- Compile options "4 7 F H N O W 03 06 0B 0G 0N 0T"

IMPORTS
    enterprises
            FROM SNMPv2-SMI-v1
    TruthValue
            FROM SNMPv2-TC-v1
    OBJECT-TYPE
            FROM RFC-1212;

docsTestMIB OBJECT IDENTIFIER ::= { clabProjDocsis 12 }
-- MODULE-IDENTITY
--  LastUpdated
--    0203150000Z
--  OrgName
--    DOCSIS 2.0 ATP Working Group
--  ContactInfo
--            David Raftus
--     Postal: Terayon Canada Ltd
--             340 Terry Fox Drive, Suite 202
--             Ottawa Ontario
--             Canada
--     Phone:  +1 613 592 1052
--     E-mail: david.raftus@terayon.com
--    
--     DOCSIS 2.0 ATP Working Group
--     General Discussion: docsis-20@cablelabs.com,
--     docsis-20-atp@cablelabs.com
--  Descr
--    This is the MIB Module supporting programmable test features
--     for DOCSIS 2.0 compliant Cable Modems (CM) and Cable Modem
--     Termination Systems (CMTS).

cableLabs       OBJECT IDENTIFIER ::= { enterprises 4491 }
clabFunction    OBJECT IDENTIFIER ::= { cableLabs 1 }
clabFuncMib2    OBJECT IDENTIFIER ::= { clabFunction 1 }
clabFuncProprietary OBJECT IDENTIFIER ::= { clabFunction 2 }
clabProject     OBJECT IDENTIFIER ::= { cableLabs 2 }
clabProjDocsis  OBJECT IDENTIFIER ::= { clabProject 1 }
clabProjPacketCable OBJECT IDENTIFIER ::= { clabProject 2 }
clabProjOpenCable OBJECT IDENTIFIER ::= { clabProject 3 }
clabProjCableHome OBJECT IDENTIFIER ::= { clabProject 4 }
docsTestMibObjects OBJECT IDENTIFIER ::= { docsTestMIB 1 }
docsTestBaseObjects OBJECT IDENTIFIER ::= { docsTestMibObjects 1 }
docsTestSetupObjects OBJECT IDENTIFIER ::= { docsTestMibObjects 2 }
docsTestConformance OBJECT IDENTIFIER ::= { docsTestMIB 2 }
docsTestCompliances OBJECT IDENTIFIER ::= { docsTestConformance 1 }
docsTestGroups  OBJECT IDENTIFIER ::= { docsTestConformance 2 }

docsTestCapability OBJECT-TYPE
    SYNTAX OCTET STRING
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the ability of this device to support the
         programmable features identified by the TYPE field from
         the CM/CMTS TLV table in [17].
         Each octet within this octet string represents eight tests.
         For example, the first octet represents tests one through eight
         (with the msb representing test one) as identified by the TYPE
         field."
    ::= { docsTestBaseObjects 1 }

docsTestStatus OBJECT-TYPE
    SYNTAX OCTET STRING
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the current operating status of tests initiated
         through the docsTestSetupObjects. The octet representation is
         identical to that used by docsTestCapability. A bit representation
         of one indicates that a test is currently active, while zero
         indicates the test is inactive or has completed."
    ::= { docsTestBaseObjects 2 }

docsTestType OBJECT-TYPE
    SYNTAX INTEGER(0..1023)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Corresponds to the TYPE field from the CM/CMTS TLV Table
         in [17]. The default value of zero indicates
         no test has yet been initiated.
         A WrongValueError should be returned in response to a write
         request for a test not supported by the device. A read request
         will return the docsTestType value last successfully written,
         whether that test is active or inactive."
    DEFVAL { 0 }
    ::= { docsTestSetupObjects 1 }

docsTestData OBJECT-TYPE
    SYNTAX OCTET STRING
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The OCTET STRING length and value correspond to the
         LENGTH and VALUE fields from the CM/CMTS TLV
         Table in [17]. A read request will return the
         docsTestData value last successfully written, whether that test
         is active or inactive."
    ::= { docsTestSetupObjects 2 }

docsTestEnable OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Used to initiate or stop the tests setup through the docsTestType
         and docsTestData objects.
         A CommitFailedError should be returned in response to a TRUE
         Write request if the values in docsTestType and docsTestData are
         incompatible, or a test could not be initiated for any other
         reason."
    ::= { docsTestSetupObjects 3 }

docsTestGroup OBJECT IDENTIFIER ::= { docsTestGroups 1 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    Group of objects implemented in both Cable Modems and
--     Cable Modem Termination Systems.
--  objects
--    docsTestCapability, docsTestStatus, docsTestType, 
--    docsTestData, docsTestEnable

docsTestBasicCompliance OBJECT IDENTIFIER ::= { docsTestCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    The compliance statement for devices that implement
--     the DOCSIS compliant programmable test features.
--  Module
--    >>current<<
--   MandGroup
--    docsTestGroup


END