-- MIB file created 19-Mar-2002 14:48:00, by -- SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com INT-SERV-MIB DEFINITIONS ::= BEGIN -- From file: "INT-SERV-MIB.my" -- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T" IMPORTS mib-2 FROM SNMPv2-SMI-v1 RowStatus, TruthValue, TestAndIncr FROM SNMPv2-TC-v1 ifIndex, InterfaceIndex FROM IF-MIB Counter, Gauge FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212; intSrv OBJECT IDENTIFIER ::= { mib-2 52 } -- MODULE-IDENTITY -- LastUpdated -- 9710030642Z -- OrgName -- IETF Integrated Services Working Group -- ContactInfo -- Fred Baker -- Postal: Cisco Systems -- 519 Lado Drive -- Santa Barbara, California 93111 -- Tel: +1 805 681 0115 -- E-Mail: fred@cisco.com -- -- John Krawczyk -- Postal: ArrowPoint Communications -- 235 Littleton Road -- Westford, Massachusetts 01886 -- Tel: +1 508 692 5875 -- E-Mail: jjk@tiac.net -- Descr -- The MIB module to describe the Integrated Services -- Protocol intSrvObjects OBJECT IDENTIFIER ::= { intSrv 1 } intSrvGenObjects OBJECT IDENTIFIER ::= { intSrv 2 } intSrvNotifications OBJECT IDENTIFIER ::= { intSrv 3 } intSrvConformance OBJECT IDENTIFIER ::= { intSrv 4 } intSrvGroups OBJECT IDENTIFIER ::= { intSrvConformance 1 } intSrvCompliances OBJECT IDENTIFIER ::= { intSrvConformance 2 } SessionNumber ::= INTEGER(0..2147483647) -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- The Session Number convention is used for -- numbers identifying sessions or saved PATH or -- RESV information. It is a number in the range -- returned by a TestAndIncr variable, having no -- protocol meaning whatsoever but serving instead -- as simple identifier. -- -- The alternative was a very complex instance or -- instance object that became unwieldy. Protocol ::= INTEGER(1..255) -- TEXTUAL-CONVENTION -- DspHint -- d -- Status -- mandatory -- Descr -- The value of the IP Protocol field of an IP -- Datagram Header. This identifies the protocol -- layer above IP. For example, the value 6 is -- used for TCP and the value 17 is used for UDP. -- The values of this field are defined in the As- -- signed Numbers RFC. SessionType ::= INTEGER(1..255) -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- The value of the C-Type field of a Session ob- -- ject, as defined in the RSVP specification. -- This value determines the lengths of octet -- strings and use of certain objects such as the -- 'port' variables. If the C-Type calls for an -- IP6 address, one would expect all source, des- -- tination, and next/previous hop addresses to be -- 16 bytes long, and for the ports to be UDP/TCP -- port numbers, for example. Port ::= OCTET STRING(SIZE(2..4)) -- TEXTUAL-CONVENTION -- DspHint -- d -- Status -- mandatory -- Descr -- The value of the UDP or TCP Source or Destina- -- tion Port field, a virtual destination port or -- generalized port identifier used with the IPSEC -- Authentication Header or Encapsulating Security -- Payload, or other session discriminator. If it -- is not used, the value should be of length 0. -- This pair, when coupled with the IP Addresses -- of the source and destination system and the IP -- protocol field, uniquely identifies a data -- stream. MessageSize ::= INTEGER(0..2147483647) -- TEXTUAL-CONVENTION -- DspHint -- d -- Status -- mandatory -- Descr -- The size of a message in bytes. This is used -- to specify the minimum and maximum size of a -- message along an integrated services route. BitRate ::= INTEGER(0..2147483647) -- TEXTUAL-CONVENTION -- DspHint -- d -- Status -- mandatory -- Descr -- The rate, in bits/second, that data may move -- in the context. Applicable contexts minimally -- include the speed of an interface or virtual -- circuit, the data rate of a (potentially aggre- -- gated) data flow, or the data rate to be allo- -- cated for use by a flow. BurstSize ::= INTEGER(0..2147483647) -- TEXTUAL-CONVENTION -- DspHint -- d -- Status -- mandatory -- Descr -- The number of octets of IP Data, including IP -- Headers, that a stream may send without concern -- for policing. QosService ::= INTEGER { bestEffort(1), guaranteedDelay(2), controlledLoad(5) } -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- The class of service in use by a flow. intSrvIfAttribTable OBJECT-TYPE SYNTAX SEQUENCE OF IntSrvIfAttribEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The reservable attributes of the system's in- terfaces." ::= { intSrvObjects 1 } intSrvIfAttribEntry OBJECT-TYPE SYNTAX IntSrvIfAttribEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The reservable attributes of a given inter- face." INDEX { ifIndex } ::= { intSrvIfAttribTable 1 } IntSrvIfAttribEntry ::= SEQUENCE { intSrvIfAttribAllocatedBits BitRate, intSrvIfAttribMaxAllocatedBits BitRate, intSrvIfAttribAllocatedBuffer BurstSize, intSrvIfAttribFlows Gauge, intSrvIfAttribPropagationDelay INTEGER, intSrvIfAttribStatus RowStatus } intSrvIfAttribAllocatedBits OBJECT-TYPE SYNTAX BitRate -- Rsyntax INTEGER(0..2147483647) -- Units -- Bits per second ACCESS read-only STATUS mandatory DESCRIPTION "The number of bits/second currently allocated to reserved sessions on the interface." ::= { intSrvIfAttribEntry 1 } intSrvIfAttribMaxAllocatedBits OBJECT-TYPE SYNTAX BitRate -- Rsyntax INTEGER(0..2147483647) -- Units -- Bits per second ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of bits/second that may be allocated to reserved sessions on the inter- face." ::= { intSrvIfAttribEntry 2 } intSrvIfAttribAllocatedBuffer OBJECT-TYPE SYNTAX BurstSize -- Rsyntax INTEGER(0..2147483647) -- Units -- Bytes ACCESS read-only STATUS mandatory DESCRIPTION "The amount of buffer space required to hold the simultaneous burst of all reserved flows on the interface." ::= { intSrvIfAttribEntry 3 } intSrvIfAttribFlows OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of reserved flows currently active on this interface. A flow can be created ei- ther from a reservation protocol (such as RSVP or ST-II) or via configuration information." ::= { intSrvIfAttribEntry 4 } intSrvIfAttribPropagationDelay OBJECT-TYPE SYNTAX INTEGER -- Units -- microseconds ACCESS read-write STATUS mandatory DESCRIPTION "The amount of propagation delay that this in- terface introduces in addition to that intro- diced by bit propagation delays." DEFVAL { 0 } ::= { intSrvIfAttribEntry 5 } intSrvIfAttribStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "'active' on interfaces that are configured for RSVP." ::= { intSrvIfAttribEntry 6 } intSrvFlowTable OBJECT-TYPE SYNTAX SEQUENCE OF IntSrvFlowEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information describing the reserved flows us- ing the system's interfaces." ::= { intSrvObjects 2 } intSrvFlowEntry OBJECT-TYPE SYNTAX IntSrvFlowEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information describing the use of a given in- terface by a given flow. The counter intSrvFlowPoliced starts counting at the in- stallation of the flow." INDEX { intSrvFlowNumber } ::= { intSrvFlowTable 1 } IntSrvFlowEntry ::= SEQUENCE { intSrvFlowNumber SessionNumber, intSrvFlowType SessionType, intSrvFlowOwner INTEGER, intSrvFlowDestAddr OCTET STRING, intSrvFlowSenderAddr OCTET STRING, intSrvFlowDestAddrLength INTEGER, intSrvFlowSenderAddrLength INTEGER, intSrvFlowProtocol Protocol, intSrvFlowDestPort Port, intSrvFlowPort Port, intSrvFlowFlowId INTEGER, intSrvFlowInterface InterfaceIndex, intSrvFlowIfAddr OCTET STRING, intSrvFlowRate BitRate, intSrvFlowBurst BurstSize, intSrvFlowWeight INTEGER, intSrvFlowQueue INTEGER, intSrvFlowMinTU MessageSize, intSrvFlowMaxTU MessageSize, intSrvFlowBestEffort Counter, intSrvFlowPoliced Counter, intSrvFlowDiscard TruthValue, intSrvFlowService QosService, intSrvFlowOrder INTEGER, intSrvFlowStatus RowStatus } intSrvFlowNumber OBJECT-TYPE SYNTAX SessionNumber -- Rsyntax INTEGER(0..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "The number of this flow. This is for SNMP In- dexing purposes only and has no relation to any protocol value." ::= { intSrvFlowEntry 1 } intSrvFlowType OBJECT-TYPE SYNTAX SessionType -- Rsyntax INTEGER(1..255) ACCESS read-write STATUS mandatory DESCRIPTION "The type of session (IP4, IP6, IP6 with flow information, etc)." ::= { intSrvFlowEntry 2 } intSrvFlowOwner OBJECT-TYPE SYNTAX INTEGER { other(1), rsvp(2), management(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The process that installed this flow in the queue policy database." ::= { intSrvFlowEntry 3 } intSrvFlowDestAddr OBJECT-TYPE SYNTAX OCTET STRING(SIZE(4..16)) ACCESS read-write STATUS mandatory DESCRIPTION "The destination address used by all senders in this session. This object may not be changed when the value of the RowStatus object is 'ac- tive'." ::= { intSrvFlowEntry 4 } intSrvFlowSenderAddr OBJECT-TYPE SYNTAX OCTET STRING(SIZE(4..16)) ACCESS read-write STATUS mandatory DESCRIPTION "The source address of the sender selected by this reservation. The value of all zeroes in- dicates 'all senders'. This object may not be changed when the value of the RowStatus object is 'active'." ::= { intSrvFlowEntry 5 } intSrvFlowDestAddrLength OBJECT-TYPE SYNTAX INTEGER(0..128) ACCESS read-write STATUS mandatory DESCRIPTION "The length of the destination address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 32 bits. This object may not be changed when the value of the RowStatus object is 'active'." ::= { intSrvFlowEntry 6 } intSrvFlowSenderAddrLength OBJECT-TYPE SYNTAX INTEGER(0..128) ACCESS read-write STATUS mandatory DESCRIPTION "The length of the sender's address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 32 bits. This object may not be changed when the value of the RowStatus object is 'active'." ::= { intSrvFlowEntry 7 } intSrvFlowProtocol OBJECT-TYPE SYNTAX Protocol -- Rsyntax INTEGER(1..255) ACCESS read-write STATUS mandatory DESCRIPTION "The IP Protocol used by a session. This ob- ject may not be changed when the value of the RowStatus object is 'active'." ::= { intSrvFlowEntry 8 } intSrvFlowDestPort OBJECT-TYPE SYNTAX Port -- Rsyntax OCTET STRING(SIZE(2..4)) ACCESS read-write STATUS mandatory DESCRIPTION "The UDP or TCP port number used as a destina- tion port for all senders in this session. If the IP protocol in use, specified by intSrvResvFwdProtocol, is 50 (ESP) or 51 (AH), this represents a virtual destination port number. A value of zero indicates that the IP protocol in use does not have ports. This ob- ject may not be changed when the value of the RowStatus object is 'active'." ::= { intSrvFlowEntry 9 } intSrvFlowPort OBJECT-TYPE SYNTAX Port -- Rsyntax OCTET STRING(SIZE(2..4)) ACCESS read-write STATUS mandatory DESCRIPTION "The UDP or TCP port number used as a source port for this sender in this session. If the IP protocol in use, specified by intSrvResvFwdProtocol is 50 (ESP) or 51 (AH), this represents a generalized port identifier (GPI). A value of zero indicates that the IP protocol in use does not have ports. This ob- ject may not be changed when the value of the RowStatus object is 'active'." ::= { intSrvFlowEntry 10 } intSrvFlowFlowId OBJECT-TYPE SYNTAX INTEGER(0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "The flow ID that this sender is using, if this is an IPv6 session." ::= { intSrvFlowEntry 11 } intSrvFlowInterface OBJECT-TYPE SYNTAX InterfaceIndex -- Rsyntax INTEGER(1..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The ifIndex value of the interface on which this reservation exists." ::= { intSrvFlowEntry 12 } intSrvFlowIfAddr OBJECT-TYPE SYNTAX OCTET STRING(SIZE(4..16)) ACCESS read-write STATUS mandatory DESCRIPTION "The IP Address on the ifEntry on which this reservation exists. This is present primarily to support those interfaces which layer multi- ple IP Addresses on the interface." ::= { intSrvFlowEntry 13 } intSrvFlowRate OBJECT-TYPE SYNTAX BitRate -- Rsyntax INTEGER(0..2147483647) -- Units -- bits per second ACCESS read-write STATUS mandatory DESCRIPTION "The Reserved Rate of the sender's data stream. If this is a Controlled Load service flow, this rate is derived from the Tspec rate parameter (r). If this is a Guaranteed service flow, this rate is derived from the Rspec clearing rate parameter (R)." ::= { intSrvFlowEntry 14 } intSrvFlowBurst OBJECT-TYPE SYNTAX BurstSize -- Rsyntax INTEGER(0..2147483647) -- Units -- bytes ACCESS read-write STATUS mandatory DESCRIPTION "The size of the largest burst expected from the sender at a time. If this is less than the sender's advertised burst size, the receiver is asking the network to provide flow pacing beyond what would be provided under normal circumstances. Such pac- ing is at the network's option." ::= { intSrvFlowEntry 15 } intSrvFlowWeight OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The weight used to prioritize the traffic. Note that the interpretation of this object is implementation-specific, as implementations vary in their use of weighting procedures." ::= { intSrvFlowEntry 16 } intSrvFlowQueue OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of the queue used by this traffic. Note that the interpretation of this object is implementation-specific, as implementations vary in their use of queue identifiers." ::= { intSrvFlowEntry 17 } intSrvFlowMinTU OBJECT-TYPE SYNTAX MessageSize -- Rsyntax INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The minimum message size for this flow. The policing algorithm will treat smaller messages as though they are this size." ::= { intSrvFlowEntry 18 } intSrvFlowMaxTU OBJECT-TYPE SYNTAX MessageSize -- Rsyntax INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum datagram size for this flow that will conform to the traffic specification. This value cannot exceed the MTU of the interface." ::= { intSrvFlowEntry 19 } intSrvFlowBestEffort OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets that were remanded to best effort service." ::= { intSrvFlowEntry 20 } intSrvFlowPoliced OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets policed since the incep- tion of the flow's service." ::= { intSrvFlowEntry 21 } intSrvFlowDiscard OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "If 'true', the flow is to incur loss when traffic is policed. If 'false', policed traff- ic is treated as best effort traffic." DEFVAL { false } ::= { intSrvFlowEntry 22 } intSrvFlowService OBJECT-TYPE SYNTAX QosService -- Rsyntax INTEGER { -- bestEffort(1), -- guaranteedDelay(2), -- controlledLoad(5) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The QoS service being applied to this flow." ::= { intSrvFlowEntry 23 } intSrvFlowOrder OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "In the event of ambiguity, the order in which the classifier should make its comparisons. The row with intSrvFlowOrder=0 is tried first, and comparisons proceed in the order of in- creasing value. Non-serial implementations of the classifier should emulate this behavior." ::= { intSrvFlowEntry 24 } intSrvFlowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "'active' for all active flows. This object may be used to install static classifier infor- mation, delete classifier information, or au- thorize such." ::= { intSrvFlowEntry 25 } intSrvFlowNewIndex OBJECT-TYPE SYNTAX TestAndIncr -- Rsyntax INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to assign values to intSrvFlowNumber as described in 'Textual Con- ventions for SNMPv2'. The network manager reads the object, and then writes the value back in the SET that creates a new instance of intSrvFlowEntry. If the SET fails with the code 'inconsistentValue', then the process must be repeated; If the SET succeeds, then the ob- ject is incremented, and the new instance is created according to the manager's directions." ::= { intSrvGenObjects 1 } intSrvIfAttribGroup OBJECT IDENTIFIER ::= { intSrvGroups 1 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- These objects are required for Systems sup- -- porting the Integrated Services Architecture. -- objects -- intSrvIfAttribAllocatedBits, intSrvIfAttribMaxAllocatedBits, -- intSrvIfAttribAllocatedBuffer, intSrvIfAttribFlows, -- intSrvIfAttribPropagationDelay, intSrvIfAttribStatus intSrvFlowsGroup OBJECT IDENTIFIER ::= { intSrvGroups 2 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- These objects are required for Systems sup- -- porting the Integrated Services Architecture. -- objects -- intSrvFlowType, intSrvFlowOwner, intSrvFlowDestAddr, -- intSrvFlowSenderAddr, intSrvFlowDestAddrLength, -- intSrvFlowSenderAddrLength, intSrvFlowProtocol, -- intSrvFlowDestPort, intSrvFlowPort, intSrvFlowFlowId, -- intSrvFlowInterface, intSrvFlowBestEffort, intSrvFlowRate, -- intSrvFlowBurst, intSrvFlowWeight, intSrvFlowQueue, -- intSrvFlowMinTU, intSrvFlowMaxTU, intSrvFlowDiscard, -- intSrvFlowPoliced, intSrvFlowService, intSrvFlowIfAddr, -- intSrvFlowOrder, intSrvFlowStatus intSrvGenObjectsGroup OBJECT IDENTIFIER ::= { intSrvGroups 3 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- These objects are required for Systems sup- -- porting the Integrated Services Architecture. -- objects -- intSrvFlowNewIndex intSrvCompliance OBJECT IDENTIFIER ::= { intSrvCompliances 1 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- The compliance statement -- Module -- >>current<< -- MandGroup -- intSrvIfAttribGroup -- MandGroup -- intSrvFlowsGroup -- MandGroup -- intSrvGenObjectsGroup -- ObjVar -- intSrvFlowType -- ObjVar -- intSrvFlowOwner -- ObjVar -- intSrvFlowDestAddr -- ObjVar -- intSrvFlowSenderAddr -- ObjVar -- intSrvFlowDestAddrLength -- ObjVar -- intSrvFlowSenderAddrLength -- ObjVar -- intSrvFlowProtocol -- ObjVar -- intSrvFlowDestPort -- ObjVar -- intSrvFlowPort -- ObjVar -- intSrvFlowFlowId -- ObjVar -- intSrvFlowInterface -- ObjVar -- intSrvFlowRate -- ObjVar -- intSrvFlowBurst -- ObjVar -- intSrvFlowWeight -- ObjVar -- intSrvFlowQueue -- ObjVar -- intSrvFlowMinTU -- ObjVar -- intSrvFlowMaxTU -- ObjVar -- intSrvFlowStatus END