-- MIB created 6/25/99 12:58:02, by
--   SMIC (the next generation) version 1.6.29, November 22, 1994.

LANOPTICS-SYSTEM-MIB DEFINITIONS ::= BEGIN

-- From file: "LANOPTICS-SYSTEM-MIB.my"

IMPORTS
    OBJECT-TYPE
            FROM RFC-1212
    enterprises, IpAddress
            FROM RFC1155-SMI
    DisplayString
            FROM RFC1213-MIB;

lanOptics       OBJECT IDENTIFIER ::= { enterprises 224 }
lanOpticsSystem OBJECT IDENTIFIER ::= { lanOptics 2 }
lanOpticsSystemCMOS OBJECT IDENTIFIER ::= { lanOpticsSystem 3 }
lanOpticsSystemCMOSIp OBJECT IDENTIFIER ::= { lanOpticsSystemCMOS 1 }
lanOpticsSystemCMOSHub OBJECT IDENTIFIER ::= { lanOpticsSystemCMOS 2 }
lanOpticsSystemCMOSRPL OBJECT IDENTIFIER ::= { lanOpticsSystemCMOS 3 }
lanOpticsSystemCMOSSerial OBJECT IDENTIFIER ::= { lanOpticsSystemCMOS 4 }
lanOpticsSystemCMOSSRAM OBJECT IDENTIFIER ::= { lanOpticsSystemCMOS 5 }
lanOpticsSystemCMOSSNMP OBJECT IDENTIFIER ::= { lanOpticsSystemCMOS 6 }
lanOpticsSystemCMOSACCESS OBJECT IDENTIFIER ::= { lanOpticsSystemCMOS 7 }
lanOpticsSystemCMOSBRDG OBJECT IDENTIFIER ::= { lanOpticsSystemCMOS 8 }

snSysDirectory OBJECT-TYPE
    SYNTAX DisplayString
--    Rsyntax OCTET STRING
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Gives the agent directory content
                       (make DOS DIR command on agent directory)."
    ::= { lanOpticsSystem 1 }

snAgentVersion OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Gives the agent major version in the high order word
                    and the minor version in low order word."
    ::= { lanOpticsSystem 2 }

snSysCMOSIpInterfaceTable OBJECT-TYPE
    SYNTAX SEQUENCE OF SnSysCMOSIpInterfaceEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A list of network interfaces."
    ::= { lanOpticsSystemCMOSIp 1 }

snSysCMOSIpInterfaceEntry OBJECT-TYPE
    SYNTAX SnSysCMOSIpInterfaceEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An interface entry containing the Ipaddress and net-mask."
    INDEX { INTEGER }
    ::= { snSysCMOSIpInterfaceTable 1 }

SnSysCMOSIpInterfaceEntry ::= SEQUENCE {
    snSysCMOSIpIpAddr IpAddress,
    snSysCMOSIpNetMask IpAddress
    }

snSysCMOSIpIpAddr OBJECT-TYPE
    SYNTAX IpAddress
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Gives the interface's IpAddress"
    ::= { snSysCMOSIpInterfaceEntry 1 }

snSysCMOSIpNetMask OBJECT-TYPE
    SYNTAX IpAddress
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Gives the interfaces's netmask"
    ::= { snSysCMOSIpInterfaceEntry 2 }

snSysCMOSIpDefGw OBJECT-TYPE
    SYNTAX IpAddress
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Gives the agent's default gateway."
    ::= { lanOpticsSystemCMOSIp 2 }

snSysCMOSIpTFTPOp OBJECT-TYPE
    SYNTAX INTEGER {
        noTFTP(1),
        limited(2),
        continuous(3)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Gives the TFTP policy:
                     1 - No TFTP, 2 - Optional, 3 - Always"
    ::= { lanOpticsSystemCMOSIp 3 }

snSysCMOSIpTFTPAddr OBJECT-TYPE
    SYNTAX IpAddress
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Gives the TFTP server Ip address."
    ::= { lanOpticsSystemCMOSIp 4 }

snSysCMOSIpTFTPFileName OBJECT-TYPE
    SYNTAX DisplayString
--    Rsyntax OCTET STRING
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Gives the boot file name at the server (full path)."
    ::= { lanOpticsSystemCMOSIp 5 }

snSysCMOSIpTFTPDrive OBJECT-TYPE
    SYNTAX INTEGER {
        driveA(41),
        driveB(42),
        driveC(43),
        driveD(44)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Gives the TFTP operation destination drive 
                   (value of ASCII character)."
    ::= { lanOpticsSystemCMOSIp 6 }

snSysCMOSHubSlotConfigTable OBJECT-TYPE
    SYNTAX SEQUENCE OF SnSysCMOSHubSlotConfigEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A list of slots entries. Each entry in this table, 
         contains the last 20 operations performed on the slot."
    ::= { lanOpticsSystemCMOSHub 1 }

snSysCMOSHubSlotConfigEntry OBJECT-TYPE
    SYNTAX SnSysCMOSHubSlotConfigEntry
    ACCESS not-accessible
    STATUS mandatory
    INDEX { INTEGER }
    ::= { snSysCMOSHubSlotConfigTable 1 }

SnSysCMOSHubSlotConfigEntry ::= SEQUENCE {
    snSysSlotLastOperations OCTET STRING,
    snSysResetSlotQueue INTEGER
    }

snSysSlotLastOperations OBJECT-TYPE
    SYNTAX OCTET STRING
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        " A description of last 20 operations performed,
          on the slot"
    ::= { snSysCMOSHubSlotConfigEntry 1 }

snSysResetSlotQueue OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        " Resets the last 20 operations queue."
    ::= { snSysCMOSHubSlotConfigEntry 2 }

snSysCMOSHubSaveHubFunctions OBJECT-TYPE
    SYNTAX INTEGER {
        not-saved(1),
        saved(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Save (2) /Do not Save (1) Hub managment functions in 
         non-volatile memory."
    ::= { lanOpticsSystemCMOSHub 2 }

snSysCMOSRPLMode OBJECT-TYPE
    SYNTAX INTEGER {
        rpl-off(1),
        rpl-on(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Determine if the image will be loaded 
                    through RPL at next boot: RPL off - 1, RPL on - 2."
    ::= { lanOpticsSystemCMOSRPL 1 }

snSysCMOSFlashMode OBJECT-TYPE
    SYNTAX INTEGER {
        flash-off(1),
        flash-on(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Determine if the image will be loaded 
                    from flash memory at next boot :
                    flash on - 2, flash off - 1."
    ::= { lanOpticsSystemCMOSRPL 2 }

snSysCMOSSerialMode OBJECT-TYPE
    SYNTAX INTEGER {
        proprietary(1),
        slip(2),
        none(3)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Determine the serial port usage mode :
                    Proprietary - 1, SLIP - 2, None - 3."
    ::= { lanOpticsSystemCMOSSerial 1 }

snSysCMOSSerialComSelect OBJECT-TYPE
    SYNTAX INTEGER {
        sr-COM1(1),
        sr-COM2(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Determine which COM port is used. "
    ::= { lanOpticsSystemCMOSSerial 2 }

snSysCMOSSerialBaudRate OBJECT-TYPE
    SYNTAX INTEGER {
        baud1200(1),
        baud2400(2),
        baud4800(3),
        baud9600(4),
        baud19200(5),
        baud38300(6),
        baud57600(7)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Determine the serial port baud rate :
                   1200 - 1, 2400 - 2, 4800 - 3, 9600 - 4,
                   19200 - 5, 38300 - 6, 57600 - 7 "
    ::= { lanOpticsSystemCMOSSerial 3 }

snSysCMOSSerialWordLength OBJECT-TYPE
    SYNTAX INTEGER {
        bits-7(1),
        bits-8(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Determine the data bits length : 7 Bits - 1, 8 Bits -2 "
    ::= { lanOpticsSystemCMOSSerial 4 }

snSysCMOSSerialStopBits OBJECT-TYPE
    SYNTAX INTEGER {
        bits-1(1),
        bits-15(2),
        bits-2(3)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Determine the number of stop bits;
                   values allowed : 1 Bit - 1, 1.5 Bits - 2, 2 Bits - 3."
    ::= { lanOpticsSystemCMOSSerial 5 }

snSysCMOSSerialParityCheck OBJECT-TYPE
    SYNTAX INTEGER {
        even(1),
        odd(2),
        none(3)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Determine the parity check policy :
                   Even - 1, Odd - 2, None - 3."
    ::= { lanOpticsSystemCMOSSerial 6 }

snSysCMOSSRAMKeepAliveSecInterval OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Determine the interval of the keep alive frame in seconds "
    ::= { lanOpticsSystemCMOSSRAM 1 }

snSysCMOSSNMPCommunitiesNum OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Keeps the number of communities."
    ::= { lanOpticsSystemCMOSSNMP 1 }

snSysCMOSSNMPTrapManagersNum OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Keeps the number of managers that traps are send to."
    ::= { lanOpticsSystemCMOSSNMP 2 }

snSysCMOSSNMPCommunitiesTable OBJECT-TYPE
    SYNTAX SEQUENCE OF SnSysCMOSSNMPCommunitiesEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A table containing the SNMP communities"
    ::= { lanOpticsSystemCMOSSNMP 3 }

snSysCMOSSNMPCommunitiesEntry OBJECT-TYPE
    SYNTAX SnSysCMOSSNMPCommunitiesEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry community info"
    INDEX { INTEGER }
    ::= { snSysCMOSSNMPCommunitiesTable 1 }

SnSysCMOSSNMPCommunitiesEntry ::= SEQUENCE {
    snSysCMOSSNMPCommunityName DisplayString,
    snSysCMOSSNMPCommunityPrivs INTEGER
    }

snSysCMOSSNMPCommunityName OBJECT-TYPE
    SYNTAX DisplayString
--    Rsyntax OCTET STRING
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This variable will give the community name."
    ::= { snSysCMOSSNMPCommunitiesEntry 1 }

snSysCMOSSNMPCommunityPrivs OBJECT-TYPE
    SYNTAX INTEGER {
        read-Only(1),
        read-Write(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This variable will give the community privilages:
                     Read Only - 1, Read/Write - 2."
    ::= { snSysCMOSSNMPCommunitiesEntry 2 }

snSysCMOSSNMPTrapCommunitiesTable OBJECT-TYPE
    SYNTAX SEQUENCE OF SnSysCMOSSNMPTrapCommunitiesEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A table containing the SNMP communities"
    ::= { lanOpticsSystemCMOSSNMP 4 }

snSysCMOSSNMPTrapCommunitiesEntry OBJECT-TYPE
    SYNTAX SnSysCMOSSNMPTrapCommunitiesEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry of trap IP destinations."
    INDEX { INTEGER }
    ::= { snSysCMOSSNMPTrapCommunitiesTable 1 }

SnSysCMOSSNMPTrapCommunitiesEntry ::= SEQUENCE {
    snSysCMOSSNMPTrapCommunityIpAddr IpAddress
    }

snSysCMOSSNMPTrapCommunityIpAddr OBJECT-TYPE
    SYNTAX IpAddress
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This variable gives a manager IP address for traps destination."
    ::= { snSysCMOSSNMPTrapCommunitiesEntry 1 }

snSysCMOSACCESSOffset OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Gives the offset in the CMOS array. 
                     For internal use only"
    ::= { lanOpticsSystemCMOSACCESS 1 }

snSysCMOSACCESSLength OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Gives the length (max 512) in the CMOS array. 
                     For internal use only,"
    ::= { lanOpticsSystemCMOSACCESS 2 }

snSysCMOSACCESSSequence OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Gives a sequnce of bytes from CMOS array. 
                     For internal use only"
    ::= { lanOpticsSystemCMOSACCESS 3 }

snSysCMOSBRDGradius OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Sets the discovery radius. 
                     Value = 0-7. 0=disable bridge."
    ::= { lanOpticsSystemCMOSBRDG 1 }

snSysCMOSBRDGlinkNumber OBJECT-TYPE
    SYNTAX INTEGER(0..3)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Sets the Link number. 
                     Value = 0-3. "
    ::= { lanOpticsSystemCMOSBRDG 2 }

snSysCMOSBRDGpassword OBJECT-TYPE
    SYNTAX DisplayString
--    Rsyntax OCTET STRING
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Sets the bridge password. 
                    8 characters . "
    ::= { lanOpticsSystemCMOSBRDG 3 }


END