-- MIB file created 10-Jul-2014 20:16:51, by -- SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com LLDP-EXT-DOT3-MIB DEFINITIONS ::= BEGIN -- From file: "LLDP-EXT-DOT3-MIB.my" -- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T" IMPORTS TruthValue FROM SNMPv2-TC-v1 lldpExtensions, lldpLocPortNum, lldpRemTimeMark, lldpRemLocalPortNum, lldpRemIndex, lldpPortConfigPortNum FROM LLDP-MIB OBJECT-TYPE FROM RFC-1212; lldpXdot3MIB OBJECT IDENTIFIER ::= { lldpExtensions 4623 } -- MODULE-IDENTITY -- LastUpdated -- 200505060000Z -- OrgName -- IEEE 802.1 Working Group -- ContactInfo -- WG-URL: http://grouper.ieee.org/groups/802/1/index.html -- WG-EMail: stds-802-1@ieee.org -- -- Contact: Paul Congdon -- Postal: Hewlett-Packard Company -- 8000 Foothills Blvd. -- Roseville, CA 95747 -- USA -- Tel: +1-916-785-5753 -- E-mail: paul_congdon@hp.com -- Descr -- The LLDP Management Information Base extension module for -- IEEE 802.3 organizationally defined discovery information. -- -- In order to assure the uniqueness of the LLDP-MIB, -- lldpXdot3MIB is branched from lldpExtensions using OUI value -- as the node. An OUI/'company_id' is a 24 bit globally unique -- assigned number referenced by various standards. -- -- Copyright (C) IEEE (2005). This version of this MIB module -- is published as Annex G.6.1 of IEEE Std 802.1AB-2005; -- see the standard itself for full legal notices. -- RevDate -- 200505060000Z -- RevDescr -- Published as part of IEEE Std 802.1AB-2005 initial version. lldpXdot3Objects OBJECT IDENTIFIER ::= { lldpXdot3MIB 1 } lldpXdot3Config OBJECT IDENTIFIER ::= { lldpXdot3Objects 1 } lldpXdot3LocalData OBJECT IDENTIFIER ::= { lldpXdot3Objects 2 } lldpXdot3RemoteData OBJECT IDENTIFIER ::= { lldpXdot3Objects 3 } lldpXdot3Conformance OBJECT IDENTIFIER ::= { lldpXdot3MIB 2 } lldpXdot3Compliances OBJECT IDENTIFIER ::= { lldpXdot3Conformance 1 } lldpXdot3Groups OBJECT IDENTIFIER ::= { lldpXdot3Conformance 2 } LldpPowerPortClass ::= INTEGER { pClassPSE(1), pClassPD(2) } -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- This TC describes the Power over Ethernet (PoE) port class. LldpLinkAggStatusMap ::= OCTET STRING(SIZE(1..2)) -- BITS are: -- aggCapable(0) -- aggEnabled(1) -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- This TC describes the link aggregation status. -- -- The bit 'aggCapable(0)' indicates the link is capable of being -- aggregated. -- -- The bit 'aggEnabled(1)' indicates the link is currently in -- aggregation. lldpXdot3PortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF LldpXdot3PortConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that controls selection of LLDP TLVs to be transmitted on individual ports." ::= { lldpXdot3Config 1 } lldpXdot3PortConfigEntry OBJECT-TYPE SYNTAX LldpXdot3PortConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "LLDP configuration information that controls the transmission of IEEE 802.3 organizationally defined TLVs on LLDP transmission capable ports. This configuration object augments the lldpPortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpPortConfigEntry entry. Each active lldpXdot3PortConfigEntry must be from non-volatile storage (along with the corresponding lldpPortConfigEntry) after a re-initialization of the management system." INDEX { lldpPortConfigPortNum } -- Augments lldpPortConfigEntry FROM LLDP-MIB ::= { lldpXdot3PortConfigTable 1 } LldpXdot3PortConfigEntry ::= SEQUENCE { lldpXdot3PortConfigTLVsTxEnable OCTET STRING } lldpXdot3PortConfigTLVsTxEnable OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..2)) -- BITS are: -- macPhyConfigStatus(0) -- powerViaMDI(1) -- linkAggregation(2) -- maxFrameSize(3) ACCESS read-write STATUS mandatory DESCRIPTION "The lldpXdot3PortConfigTLVsTxEnable, defined as a bitmap, includes the IEEE 802.3 organizationally defined set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management. Each bit in the bitmap corresponds to an IEEE 802.3 subtype associated with a specific IEEE 802.3 optional TLV. The bit 0 is not used since there is no corresponding subtype. The bit 'macPhyConfigStatus(0)' indicates that LLDP agent should transmit 'MAC/PHY configuration/status TLV'. The bit 'powerViaMDI(1)' indicates that LLDP agent should transmit 'Power via MDI TLV'. The bit 'linkAggregation(2)' indicates that LLDP agent should transmit 'Link Aggregation TLV'. The bit 'maxFrameSize(3)' indicates that LLDP agent should transmit 'Maximum-frame-size TLV'. The default value for lldpXdot3PortConfigTLVsTxEnable object is an empty set, which means no enumerated values are set. The value of this object must be restored from non-volatile storage after a re-initialization of the management system." REFERENCE "IEEE 802.1AB-2005 10.2.1.1" DEFVAL { '00'h } ::= { lldpXdot3PortConfigEntry 1 } lldpXdot3LocPortTable OBJECT-TYPE SYNTAX SEQUENCE OF LldpXdot3LocPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains one row per port of Ethernet port information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent." ::= { lldpXdot3LocalData 1 } lldpXdot3LocPortEntry OBJECT-TYPE SYNTAX LldpXdot3LocPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a particular port component." INDEX { lldpLocPortNum } ::= { lldpXdot3LocPortTable 1 } LldpXdot3LocPortEntry ::= SEQUENCE { lldpXdot3LocPortAutoNegSupported TruthValue, lldpXdot3LocPortAutoNegEnabled TruthValue, lldpXdot3LocPortAutoNegAdvertisedCap OCTET STRING, lldpXdot3LocPortOperMauType INTEGER } lldpXdot3LocPortAutoNegSupported OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The truth value used to indicate whether the given port (associated with the local system) supports Auto-negotiation." REFERENCE "IEEE 802.1AB-2005 G.2.1" ::= { lldpXdot3LocPortEntry 1 } lldpXdot3LocPortAutoNegEnabled OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The truth value used to indicate whether port Auto-negotiation is enabled on the given port associated with the local system." REFERENCE "IEEE 802.1AB-2005 G.2.1" ::= { lldpXdot3LocPortEntry 2 } lldpXdot3LocPortAutoNegAdvertisedCap OBJECT-TYPE SYNTAX OCTET STRING(SIZE(2)) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the value (bitmap) of the ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which is associated with the given port on the local system." REFERENCE "IEEE 802.1AB-2005 G.2.2" ::= { lldpXdot3LocPortEntry 3 } lldpXdot3LocPortOperMauType OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "An integer value that indicates the operational MAU type of the given port on the local system. This object contains the integer value derived from the list position of the corresponding dot3MauType as listed in IETF RFC 3636 (or subsequent revisions) and is equal to the last number in the respective dot3MauType OID. For example, if the ifMauType object is dot3MauType1000BaseTHD which corresponds to {dot3MauType 29}, the numerical value of this field will be 29. For MAU types not listed in RFC 3636 (or subsequent revisions), the value of this field shall be set to zero." REFERENCE "IEEE 802.1AB-2005 G.2.3" ::= { lldpXdot3LocPortEntry 4 } lldpXdot3LocPowerTable OBJECT-TYPE SYNTAX SEQUENCE OF LldpXdot3LocPowerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains one row per port of power ethernet information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent." ::= { lldpXdot3LocalData 2 } lldpXdot3LocPowerEntry OBJECT-TYPE SYNTAX LldpXdot3LocPowerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a particular port component." INDEX { lldpLocPortNum } ::= { lldpXdot3LocPowerTable 1 } LldpXdot3LocPowerEntry ::= SEQUENCE { lldpXdot3LocPowerPortClass LldpPowerPortClass, lldpXdot3LocPowerMDISupported TruthValue, lldpXdot3LocPowerMDIEnabled TruthValue, lldpXdot3LocPowerPairControlable TruthValue, lldpXdot3LocPowerPairs INTEGER, lldpXdot3LocPowerClass INTEGER } lldpXdot3LocPowerPortClass OBJECT-TYPE SYNTAX LldpPowerPortClass -- Rsyntax INTEGER { -- pClassPSE(1), -- pClassPD(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The value that identifies the port Class of the given port associated with the local system." REFERENCE "IEEE 802.1AB-2005 G.3.1" ::= { lldpXdot3LocPowerEntry 1 } lldpXdot3LocPowerMDISupported OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The truth value used to indicate whether the MDI power is supported on the given port associated with the local system." REFERENCE "IEEE 802.1AB-2005 G.3.1" ::= { lldpXdot3LocPowerEntry 2 } lldpXdot3LocPowerMDIEnabled OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The truth value used to identify whether MDI power is enabled on the given port associated with the local system." REFERENCE "IEEE 802.1AB-2005 G.3.1" ::= { lldpXdot3LocPowerEntry 3 } lldpXdot3LocPowerPairControlable OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in IETF RFC 3621) and is used to indicate whether the pair selection can be controlled on the given port associated with the local system." REFERENCE "IEEE 802.1AB-2005 G.3.1" ::= { lldpXdot3LocPowerEntry 4 } lldpXdot3LocPowerPairs OBJECT-TYPE SYNTAX INTEGER(1|2) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the value of the pethPsePortPowerPairs object (defined in IETF RFC 3621) which is associated with the given port on the local system." REFERENCE "IEEE 802.1AB-2005 G.3.2" ::= { lldpXdot3LocPowerEntry 5 } lldpXdot3LocPowerClass OBJECT-TYPE SYNTAX INTEGER(1|2|3|4|5) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the value of the pethPsePortPowerClassifications object (defined in IETF RFC 3621) which is associated with the given port on the local system." REFERENCE "IEEE 802.1AB-2005 G.3.3" ::= { lldpXdot3LocPowerEntry 6 } lldpXdot3LocLinkAggTable OBJECT-TYPE SYNTAX SEQUENCE OF LldpXdot3LocLinkAggEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains one row per port of link aggregation information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent." ::= { lldpXdot3LocalData 3 } lldpXdot3LocLinkAggEntry OBJECT-TYPE SYNTAX LldpXdot3LocLinkAggEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Link Aggregation information about a particular port component." INDEX { lldpLocPortNum } ::= { lldpXdot3LocLinkAggTable 1 } LldpXdot3LocLinkAggEntry ::= SEQUENCE { lldpXdot3LocLinkAggStatus LldpLinkAggStatusMap, lldpXdot3LocLinkAggPortId INTEGER } lldpXdot3LocLinkAggStatus OBJECT-TYPE SYNTAX LldpLinkAggStatusMap -- Rsyntax OCTET STRING(SIZE(1..2)) -- BITS are: -- aggCapable(0) -- aggEnabled(1) ACCESS read-only STATUS mandatory DESCRIPTION "The bitmap value contains the link aggregation capabilities and the current aggregation status of the link." REFERENCE "IEEE 802.1AB-2005 G.4.1" ::= { lldpXdot3LocLinkAggEntry 1 } lldpXdot3LocLinkAggPortId OBJECT-TYPE SYNTAX INTEGER(0|1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the IEEE 802.3 aggregated port identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1), derived from the ifNumber of the ifIndex for the port component in link aggregation. If the port is not in link aggregation state and/or it does not support link aggregation, this value should be set to zero." REFERENCE "IEEE 802.1AB-2005 G.4.2" ::= { lldpXdot3LocLinkAggEntry 2 } lldpXdot3LocMaxFrameSizeTable OBJECT-TYPE SYNTAX SEQUENCE OF LldpXdot3LocMaxFrameSizeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains one row per port of maximum frame size information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent." ::= { lldpXdot3LocalData 4 } lldpXdot3LocMaxFrameSizeEntry OBJECT-TYPE SYNTAX LldpXdot3LocMaxFrameSizeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Maximum Frame Size information about a particular port component." INDEX { lldpLocPortNum } ::= { lldpXdot3LocMaxFrameSizeTable 1 } LldpXdot3LocMaxFrameSizeEntry ::= SEQUENCE { lldpXdot3LocMaxFrameSize INTEGER } lldpXdot3LocMaxFrameSize OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "An integer value indicating the maximum supported frame size in octets on the given port of the local system." REFERENCE "IEEE 802.1AB-2005 G.5.1" ::= { lldpXdot3LocMaxFrameSizeEntry 1 } lldpXdot3RemPortTable OBJECT-TYPE SYNTAX SEQUENCE OF LldpXdot3RemPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains Ethernet port information (as a part of the LLDP 802.3 organizational extension) of the remote system." ::= { lldpXdot3RemoteData 1 } lldpXdot3RemPortEntry OBJECT-TYPE SYNTAX LldpXdot3RemPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a particular physical network connection." INDEX { lldpRemTimeMark, lldpRemLocalPortNum, lldpRemIndex } ::= { lldpXdot3RemPortTable 1 } LldpXdot3RemPortEntry ::= SEQUENCE { lldpXdot3RemPortAutoNegSupported TruthValue, lldpXdot3RemPortAutoNegEnabled TruthValue, lldpXdot3RemPortAutoNegAdvertisedCap OCTET STRING, lldpXdot3RemPortOperMauType INTEGER } lldpXdot3RemPortAutoNegSupported OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The truth value used to indicate whether the given port (associated with remote system) supports Auto-negotiation." REFERENCE "IEEE 802.1AB-2005 G.2.1" ::= { lldpXdot3RemPortEntry 1 } lldpXdot3RemPortAutoNegEnabled OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The truth value used to indicate whether port Auto-negotiation is enabled on the given port associated with the remote system." REFERENCE "IEEE 802.1AB-2005 G.2.1" ::= { lldpXdot3RemPortEntry 2 } lldpXdot3RemPortAutoNegAdvertisedCap OBJECT-TYPE SYNTAX OCTET STRING(SIZE(2)) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the value (bitmap) of the ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which is associated with the given port on the remote system." REFERENCE "IEEE 802.1AB-2005 G.2.2" ::= { lldpXdot3RemPortEntry 3 } lldpXdot3RemPortOperMauType OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "An integer value that indicates the operational MAU type of the sending device. This object contains the integer value derived from the list position of the corresponding dot3MauType as listed in in IETF RFC 3636 (or subsequent revisions) and is equal to the last number in the respective dot3MauType OID. For example, if the ifMauType object is dot3MauType1000BaseTHD which corresponds to {dot3MauType 29}, the numerical value of this field will be 29. For MAU types not listed in RFC 3636 (or subsequent revisions), the value of this field shall be set to zero." REFERENCE "IEEE 802.1AB-2005 G.2.3" ::= { lldpXdot3RemPortEntry 4 } lldpXdot3RemPowerTable OBJECT-TYPE SYNTAX SEQUENCE OF LldpXdot3RemPowerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains Ethernet power information (as a part of the LLDP 802.3 organizational extension) of the remote system." ::= { lldpXdot3RemoteData 2 } lldpXdot3RemPowerEntry OBJECT-TYPE SYNTAX LldpXdot3RemPowerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a particular physical network connection." INDEX { lldpRemTimeMark, lldpRemLocalPortNum, lldpRemIndex } ::= { lldpXdot3RemPowerTable 1 } LldpXdot3RemPowerEntry ::= SEQUENCE { lldpXdot3RemPowerPortClass LldpPowerPortClass, lldpXdot3RemPowerMDISupported TruthValue, lldpXdot3RemPowerMDIEnabled TruthValue, lldpXdot3RemPowerPairControlable TruthValue, lldpXdot3RemPowerPairs INTEGER, lldpXdot3RemPowerClass INTEGER } lldpXdot3RemPowerPortClass OBJECT-TYPE SYNTAX LldpPowerPortClass -- Rsyntax INTEGER { -- pClassPSE(1), -- pClassPD(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The value that identifies the port Class of the given port associated with the remote system." REFERENCE "IEEE 802.1AB-2005 G.3.1" ::= { lldpXdot3RemPowerEntry 1 } lldpXdot3RemPowerMDISupported OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The truth value used to indicate whether the MDI power is supported on the given port associated with the remote system." REFERENCE "IEEE 802.1AB-2005 G.3.1" ::= { lldpXdot3RemPowerEntry 2 } lldpXdot3RemPowerMDIEnabled OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The truth value used to identify whether MDI power is enabled on the given port associated with the remote system." REFERENCE "IEEE 802.1AB-2005 G.3.1" ::= { lldpXdot3RemPowerEntry 3 } lldpXdot3RemPowerPairControlable OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in IETF RFC 3621) and is used to indicate whether the pair selection can be controlled on the given port associated with the remote system." REFERENCE "IEEE 802.1AB-2005 G.3.1" ::= { lldpXdot3RemPowerEntry 4 } lldpXdot3RemPowerPairs OBJECT-TYPE SYNTAX INTEGER(1|2) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the value of the pethPsePortPowerPairs object (defined in IETF RFC 3621) which is associated with the given port on the remote system." REFERENCE "IEEE 802.1AB-2005 G.3.2" ::= { lldpXdot3RemPowerEntry 5 } lldpXdot3RemPowerClass OBJECT-TYPE SYNTAX INTEGER(1|2|3|4|5) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the value of the pethPsePortPowerClassifications object (defined in IETF RFC 3621) which is associated with the given port on the remote system." REFERENCE "IEEE 802.1AB-2005 G.3.3" ::= { lldpXdot3RemPowerEntry 6 } lldpXdot3RemLinkAggTable OBJECT-TYPE SYNTAX SEQUENCE OF LldpXdot3RemLinkAggEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains port link aggregation information (as a part of the LLDP 802.3 organizational extension) of the remote system." ::= { lldpXdot3RemoteData 3 } lldpXdot3RemLinkAggEntry OBJECT-TYPE SYNTAX LldpXdot3RemLinkAggEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Link Aggregation information about remote system's port component." INDEX { lldpRemTimeMark, lldpRemLocalPortNum, lldpRemIndex } ::= { lldpXdot3RemLinkAggTable 1 } LldpXdot3RemLinkAggEntry ::= SEQUENCE { lldpXdot3RemLinkAggStatus LldpLinkAggStatusMap, lldpXdot3RemLinkAggPortId INTEGER } lldpXdot3RemLinkAggStatus OBJECT-TYPE SYNTAX LldpLinkAggStatusMap -- Rsyntax OCTET STRING(SIZE(1..2)) -- BITS are: -- aggCapable(0) -- aggEnabled(1) ACCESS read-only STATUS mandatory DESCRIPTION "The bitmap value contains the link aggregation capabilities and the current aggregation status of the link." REFERENCE "IEEE 802.1AB-2005 G.4.1" ::= { lldpXdot3RemLinkAggEntry 1 } lldpXdot3RemLinkAggPortId OBJECT-TYPE SYNTAX INTEGER(0|1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the IEEE 802.3 aggregated port identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1), derived from the ifNumber of the ifIndex for the port component associated with the remote system. If the remote port is not in link aggregation state and/or it does not support link aggregation, this value should be zero." REFERENCE "IEEE 802.1AB-2005 G.4.2" ::= { lldpXdot3RemLinkAggEntry 2 } lldpXdot3RemMaxFrameSizeTable OBJECT-TYPE SYNTAX SEQUENCE OF LldpXdot3RemMaxFrameSizeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains one row per port of maximum frame size information (as a part of the LLDP 802.3 organizational extension) of the remote system." ::= { lldpXdot3RemoteData 4 } lldpXdot3RemMaxFrameSizeEntry OBJECT-TYPE SYNTAX LldpXdot3RemMaxFrameSizeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Maximum Frame Size information about a particular port component." INDEX { lldpRemTimeMark, lldpRemLocalPortNum, lldpRemIndex } ::= { lldpXdot3RemMaxFrameSizeTable 1 } LldpXdot3RemMaxFrameSizeEntry ::= SEQUENCE { lldpXdot3RemMaxFrameSize INTEGER } lldpXdot3RemMaxFrameSize OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "An integer value indicating the maximum supported frame size in octets on the port component associated with the remote system." REFERENCE "IEEE 802.1AB-2005 G.5.1" ::= { lldpXdot3RemMaxFrameSizeEntry 1 } lldpXdot3ConfigGroup OBJECT IDENTIFIER ::= { lldpXdot3Groups 1 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- The collection of objects which are used to configure the -- LLDP 802.3 organizational extension implementation behavior. -- -- This group is mandatory for agents which implement the -- LLDP 802.3 organizational extension. -- objects -- lldpXdot3PortConfigTLVsTxEnable lldpXdot3LocSysGroup OBJECT IDENTIFIER ::= { lldpXdot3Groups 2 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- The collection of objects which are used to represent LLDP -- 802.3 organizational extension Local Device Information. -- -- This group is mandatory for agents which implement the -- LLDP 802.3 organizational extension in the TX mode. -- objects -- lldpXdot3LocPortAutoNegSupported, -- lldpXdot3LocPortAutoNegEnabled, -- lldpXdot3LocPortAutoNegAdvertisedCap, -- lldpXdot3LocPortOperMauType, lldpXdot3LocPowerPortClass, -- lldpXdot3LocPowerMDISupported, lldpXdot3LocPowerMDIEnabled, -- lldpXdot3LocPowerPairControlable, lldpXdot3LocPowerPairs, -- lldpXdot3LocPowerClass, lldpXdot3LocLinkAggStatus, -- lldpXdot3LocLinkAggPortId, lldpXdot3LocMaxFrameSize lldpXdot3RemSysGroup OBJECT IDENTIFIER ::= { lldpXdot3Groups 3 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- The collection of objects which are used to represent LLDP -- 802.3 organizational extension Local Device Information. -- -- This group is mandatory for agents which implement the -- LLDP 802.3 organizational extension in the RX mode. -- objects -- lldpXdot3RemPortAutoNegSupported, -- lldpXdot3RemPortAutoNegEnabled, -- lldpXdot3RemPortAutoNegAdvertisedCap, -- lldpXdot3RemPortOperMauType, lldpXdot3RemPowerPortClass, -- lldpXdot3RemPowerMDISupported, lldpXdot3RemPowerMDIEnabled, -- lldpXdot3RemPowerPairControlable, lldpXdot3RemPowerPairs, -- lldpXdot3RemPowerClass, lldpXdot3RemLinkAggStatus, -- lldpXdot3RemLinkAggPortId, lldpXdot3RemMaxFrameSize lldpXdot3Compliance OBJECT IDENTIFIER ::= { lldpXdot3Compliances 1 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- The compliance statement for SNMP entities which implement -- the LLDP 802.3 organizational extension MIB. -- Module -- >>current<< -- MandGroup -- lldpXdot3ConfigGroup -- MandGroup -- lldpXdot3LocSysGroup -- MandGroup -- lldpXdot3RemSysGroup END