-- MIB file created 21-Dec-2010 17:40:30, by -- SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com LLDP-EXT-MED-MIB DEFINITIONS ::= BEGIN -- From file: "LLDP-MED-MIB.my" -- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T" IMPORTS TruthValue FROM SNMPv2-TC-v1 lldpExtensions, lldpLocPortNum, lldpRemTimeMark, lldpRemLocalPortNum, lldpRemIndex, lldpPortConfigPortNum, lldpRemChassisIdSubtype, lldpRemChassisId FROM LLDP-MIB Dscp FROM DIFFSERV-DSCP-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB Gauge FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215; lldpXMedMIB OBJECT IDENTIFIER ::= { lldpExtensions 4795 } -- MODULE-IDENTITY -- LastUpdated -- 200507280000Z -- OrgName -- TIA TR41.4 Working Group -- ContactInfo -- WG-URL: http://www.tiaonline.org/standards/sfg/scope.cfm#TR-41.4 -- WG-EMail: tr41@tiacomm.org -- Contact: Chair, TIA TR-41 -- Postal: Telecommunications Industry Association -- 2500 Wilson Blvd., Suite 300 -- Arlington, VA 22201 USA -- Tel: (703) 907-7700 -- E-mail: tr41@tiacomm.org -- Descr -- The LLDP Management Information Base extension module for -- TIA-TR41.4 media endpoint discovery information. -- -- In order to assure the uniqueness of the LLDP-MIB, -- lldpXMedMIB is branched from lldpExtensions using the TIA OUI -- value as the node. An OUI/'company_id' is a 24 bit globally -- unique assigned number referenced by various standards. -- -- Copyright (C) TIA (2005). This version of this MIB module -- is published as Section 13.3 of ANSI/TIA-1057. -- -- See the standard itself for full legal notices. -- RevDate -- 200507280000Z -- RevDescr -- Published as part of ANSI/TIA-1057. lldpXMedNotifications OBJECT IDENTIFIER ::= { lldpXMedMIB 0 } lldpXMedObjects OBJECT IDENTIFIER ::= { lldpXMedMIB 1 } lldpXMedConfig OBJECT IDENTIFIER ::= { lldpXMedObjects 1 } lldpXMedLocalData OBJECT IDENTIFIER ::= { lldpXMedObjects 2 } lldpXMedRemoteData OBJECT IDENTIFIER ::= { lldpXMedObjects 3 } lldpXMedConformance OBJECT IDENTIFIER ::= { lldpXMedMIB 2 } lldpXMedCompliances OBJECT IDENTIFIER ::= { lldpXMedConformance 1 } lldpXMedGroups OBJECT IDENTIFIER ::= { lldpXMedConformance 2 } LldpXMedDeviceClass ::= INTEGER { --?? enum value of zero may cause problems -- notDefined(0), endpointClass1(1), endpointClass2(2), endpointClass3(3), networkConnectivity(4) } -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- Device Class to which the device is a member. -- -- A value of notDefined(0) indicates that the device -- has capabilities not covered by any of the LLDP-MED classes. -- -- A value of endpointClass1(1) indicates that the device -- has endpoint class 1 capabilities. -- -- A value of endpointClass2(2) indicates that the device -- has endpoint class 2 capabilities. -- -- A value of endpointClass3(3) indicates that the device -- has endpoint class 3 capabilities. -- -- A value of networkConnectivity(4) indicates that the device -- has network connectivity device capabilities. LldpXMedCapabilities ::= OCTET STRING(SIZE(1..2)) -- BITS are: -- capabilities(0) -- networkPolicy(1) -- location(2) -- extendedPSE(3) -- extendedPD(4) -- inventory(5) -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- Bitmap that includes the MED organizationally defined set of LLDP -- TLVs the device is capable of and whose transmission is allowed on -- the local LLDP agent by network management. -- -- Each bit in the bitmap corresponds to an LLDP-MED subtype associated -- with a specific TIA TR41.4 MED TLV. -- -- Having the bit 'capabilities(0)' set indicates that the LLDP -- agent refers to the Capabilities TLVs. -- -- Having the bit 'networkPolicy(1)' set indicates that the LLDP -- agent refers to the Network Policy TLVs. -- -- Having the bit 'location(2)' set indicates that -- the LLDP agent refers to the Emergency Communications -- System Location TLVs. -- -- Having the bit 'extendedPSE(3)' set indicates that -- the LLDP agent refers to the Extended PoE TLVs with PSE -- capabilities. -- -- Having the bit 'extendedPD(4)' set indicates that -- the LLDP agent refers to the Extended PoE TLVs with PD -- capabilities. -- -- Having the bit 'inventory(5)' set indicates that -- the LLDP agent refers to the Hardware Revision, Firmware -- Revision, Software Revision, Serial Number, Manufacturer Name, -- Model Name, and Asset ID TLVs. LocationSubtype ::= INTEGER { unknown(1), coordinateBased(2), civicAddress(3), elin(4) } -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- The location subtype advertised by the remote endpoint. -- -- A value coordinateBased(2) indicates that the location subtype -- advertised by the endpoint is defined to use the relevant sub- -- fields of the DHCP option for Coordinate LCI as specified in -- ANSI/TIA-1057, Section 10.2.4.3.1. -- -- A value civicAddress(3) indicates that the location subtype -- advertised by the endpoint is defined to use the relevant sub- -- fields of the DHCP option for Civic Address as specified in -- ANSI/TIA-1057, Section 10.2.4.3.2. -- -- A value elin(4) indicates that the location subtype -- advertised by the endpoint is defined to use the Emergency -- Location Information Number (ELIN) as specified in -- ANSI/TIA-1057, Section 10.2.4.3.3. PolicyAppType ::= OCTET STRING(SIZE(1..2)) -- BITS are: -- unknown(0) -- voice(1) -- voiceSignaling(2) -- guestVoice(3) -- guestVoiceSignaling(4) -- softPhoneVoice(5) -- videoconferencing(6) -- streamingVideo(7) -- videoSignaling(8) -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- The media type that defines the primary function of the -- application for the policy advertised by an endpoint. -- -- Having the bit voice(1) set indicates that the media type defining -- a primary function of the application for the policy advertised on -- the local port is voice. -- -- Having the bit voiceSignaling(3) set indicates that the media type -- defining a primary function of the application for the policy -- advertised on the local port is voice signaling. -- -- Having the bit guestVoice(4) set indicates that the media type -- Defining a primary function of the application for the policy -- advertised on the local port is guest voice. -- -- Having the bit guestVoiceSignaling(5) set indicates that the media -- type defining a primary function of the application for the policy -- advertised on the local port is guest voice signaling. -- -- Having the bit softPhoneVoice(6) set indicates that the media type -- Defining a primary function of the application for the policy -- advertised on the local port is softphone voice. -- -- Having the bit videoConferencing(7) set indicates that the media -- type defining a primary function of the application for the policy -- advertised on the local port is voice. -- -- Having the bit streamingVideo(8) set indicates that the media type -- defining a primary function of the application for the policy -- advertised on the local port is streaming video. -- -- Having the bit videoSignaling(2) set indicates that the media type -- defining a primary function of the application for the policy -- advertised on the local port is video signaling. lldpXMedLocDeviceClass OBJECT-TYPE SYNTAX LldpXMedDeviceClass -- Rsyntax INTEGER { -- ?? enum value of zero may cause problems -- notDefined(0), -- endpointClass1(1), -- endpointClass2(2), -- endpointClass3(3), -- networkConnectivity(4) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Local Device Class." REFERENCE " ANSI/TIA-1057, Section 10.2.2.2" ::= { lldpXMedConfig 1 } lldpXMedPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF LldpXMedPortConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that controls selection of LLDP TLVs to be transmitted on individual ports." ::= { lldpXMedConfig 2 } lldpXMedPortConfigEntry OBJECT-TYPE SYNTAX LldpXMedPortConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "LLDP configuration information that controls the transmission of the MED organizationally defined TLVs on LLDP transmission capable ports. This configuration object augments the lldpPortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpPortConfigEntry entry. Each active lldpXMedPortConfigEntry must be stored and retrieved from non-volatile storage (along with the corresponding lldpPortConfigEntry) after a re-initialization of the management system." INDEX { lldpPortConfigPortNum } -- Augments lldpPortConfigEntry FROM LLDP-MIB ::= { lldpXMedPortConfigTable 1 } LldpXMedPortConfigEntry ::= SEQUENCE { lldpXMedPortCapSupported LldpXMedCapabilities, lldpXMedPortConfigTLVsTxEnable LldpXMedCapabilities, lldpXMedPortConfigNotifEnable TruthValue } lldpXMedPortCapSupported OBJECT-TYPE SYNTAX LldpXMedCapabilities -- Rsyntax OCTET STRING(SIZE(1..2)) -- BITS are: -- capabilities(0) -- networkPolicy(1) -- location(2) -- extendedPSE(3) -- extendedPD(4) -- inventory(5) ACCESS read-only STATUS mandatory DESCRIPTION "The bitmap includes the MED organizationally defined set of LLDP TLVs whose transmission is possible for the respective port on the LLDP agent of the device. Each bit in the bitmap corresponds to an LLDP-MED subtype associated with a specific TIA TR41.4 MED optional TLV. If the bit is set, the agent supports the corresponding TLV." REFERENCE "ANSI/TIA-1057, Section 10.2.2.3" ::= { lldpXMedPortConfigEntry 1 } lldpXMedPortConfigTLVsTxEnable OBJECT-TYPE SYNTAX LldpXMedCapabilities -- Rsyntax OCTET STRING(SIZE(1..2)) -- BITS are: -- capabilities(0) -- networkPolicy(1) -- location(2) -- extendedPSE(3) -- extendedPD(4) -- inventory(5) ACCESS read-write STATUS mandatory DESCRIPTION "The lldpXMedPortConfigTLVsTxEnable, defined as a bitmap, includes the MED organizationally defined set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management. Each bit in the bitmap corresponds to an LLDP-MED subtype associated with a specific TIA TR41.4 MED optional TLV. If the bit is set, the agent will send the corresponding TLV if the respective capability is supported per port. Setting a bit with in this object for a non-supported capability shall have no functional effect and will result in an inconsistent value error returned to the management application. There are other rules and restrictions that prevent arbitrary combinations of TLVs to be enabled on LLDP-MED devices according to the device classes. These rules are defined in Section 10.2.1, Tables 5 - 9 of ANSI/TIA-1057. In case a management application attempts to set this object to a value that does not follow the rules, the set operation shall have and will result in an inconsistent value error returned to the management application. Setting this object to an empty set is valid and effectively disables LLDP-MED on a per-port basis by disabling transmission of all MED organizational TLVs. In this case the remote tables objects in the LLDP-MED MIB corresponding to the respective port will not be populated. The default value for lldpXMedPortConfigTLVsTxEnable object is an empty set, which means no enumerated values are set. The value of this object must be restored from non-volatile storage after a re-initialization of the management system." REFERENCE "ANSI/TIA-1057, Section 10.2.2.3" DEFVAL { '00'h } ::= { lldpXMedPortConfigEntry 2 } lldpXMedPortConfigNotifEnable OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "A value of 'true(1)' enables sending the topology change traps on this port. A value of 'false(2)' disables sending the topology change traps on this port." REFERENCE " ANSI/TIA-1057, Section 12.3" DEFVAL { false } ::= { lldpXMedPortConfigEntry 3 } lldpXMedFastStartRepeatCount OBJECT-TYPE SYNTAX Gauge(1..10) ACCESS read-write STATUS mandatory DESCRIPTION "The number of times the fast start LLDPDU are being sent during the activation of the fast start mechanism defined by LLDP-MED." REFERENCE " ANSI/TIA-1057, Section 11.2.1" DEFVAL { 3 } ::= { lldpXMedConfig 3 } lldpXMedLocMediaPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF LldpXMedLocMediaPolicyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains one row per policy type per port of media policy information (as a part of the MED organizational extension) on the local system known to this agent." ::= { lldpXMedLocalData 1 } lldpXMedLocMediaPolicyEntry OBJECT-TYPE SYNTAX LldpXMedLocMediaPolicyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a particular policy on a specific port component." INDEX { lldpLocPortNum, lldpXMedLocMediaPolicyAppType } ::= { lldpXMedLocMediaPolicyTable 1 } LldpXMedLocMediaPolicyEntry ::= SEQUENCE { lldpXMedLocMediaPolicyAppType PolicyAppType, lldpXMedLocMediaPolicyVlanID INTEGER, lldpXMedLocMediaPolicyPriority INTEGER, lldpXMedLocMediaPolicyDscp Dscp, lldpXMedLocMediaPolicyUnknown TruthValue, lldpXMedLocMediaPolicyTagged TruthValue } lldpXMedLocMediaPolicyAppType OBJECT-TYPE SYNTAX PolicyAppType -- Rsyntax OCTET STRING(SIZE(1..2)) -- BITS are: -- unknown(0) -- voice(1) -- voiceSignaling(2) -- guestVoice(3) -- guestVoiceSignaling(4) -- softPhoneVoice(5) -- videoconferencing(6) -- streamingVideo(7) -- videoSignaling(8) ACCESS not-accessible STATUS mandatory DESCRIPTION "The media type that defines the primary function of the application for the policy advertised by an endpoint." REFERENCE "ANSI/TIA-1057, Section 10.2.3.1" ::= { lldpXMedLocMediaPolicyEntry 1 } lldpXMedLocMediaPolicyVlanID OBJECT-TYPE SYNTAX INTEGER(0|1..4094|4095) ACCESS read-only STATUS mandatory DESCRIPTION "An extension of the VLAN Identifier for the port, as defined in IEEE 802.1P-1998. A value of 1 through 4094 is used to define a valid PVID. A value of 0 shall be used if the device is using priority tagged frames, meaning that only the 802.1p priority level is significant and the default VID of the ingress port is being used instead. A value of 4095 is reserved for implementation use." REFERENCE " ANSI/TIA-1057, Section 10.2.3.5" ::= { lldpXMedLocMediaPolicyEntry 2 } lldpXMedLocMediaPolicyPriority OBJECT-TYPE SYNTAX INTEGER(0..7) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the value of the 802.1p priority which is associated with the given port on the local system." REFERENCE " ANSI/TIA-1057, Section 10.2.3.6 " ::= { lldpXMedLocMediaPolicyEntry 3 } lldpXMedLocMediaPolicyDscp OBJECT-TYPE SYNTAX Dscp -- Rsyntax INTEGER(0..63) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the value of the Differentiated Service Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 which is associated with the given port on the local system." REFERENCE " ANSI/TIA-1057, Section 10.2.3.7" ::= { lldpXMedLocMediaPolicyEntry 4 } lldpXMedLocMediaPolicyUnknown OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "A value of 'true' indicates that the network policy for the specified application type is currently unknown. In this case, the VLAN ID, the layer 2 priority and the DSCP value fields are ignored. A value of 'false' indicates that this network policy is defined " REFERENCE " ANSI/TIA-1057, Section 10.2.3.2" ::= { lldpXMedLocMediaPolicyEntry 5 } lldpXMedLocMediaPolicyTagged OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "A value of 'true' indicates that the application is using a tagged VLAN. A value of 'false' indicates that for the specific application the device either is using an untagged VLAN or does not support port based VLAN operation. In this case, both the VLAN ID and the Layer 2 priority fields are ignored and only the DSCP value has relevance " REFERENCE " ANSI/TIA-1057, Section 10.2.3.3" ::= { lldpXMedLocMediaPolicyEntry 6 } lldpXMedLocHardwareRev OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(0..32)) -- Rsyntax OCTET STRING(SIZE(0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The vendor-specific hardware revision string as advertised by the endpoint." REFERENCE " ANSI/TIA-1057, Section 10.2.6.1" ::= { lldpXMedLocalData 2 } lldpXMedLocFirmwareRev OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(0..32)) -- Rsyntax OCTET STRING(SIZE(0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The vendor-specific firmware revision string as advertised by the endpoint." REFERENCE " ANSI/TIA-1057, Section 10.2.6.2" ::= { lldpXMedLocalData 3 } lldpXMedLocSoftwareRev OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(0..32)) -- Rsyntax OCTET STRING(SIZE(0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The vendor-specific software revision string as advertised by the endpoint." REFERENCE " ANSI/TIA-1057, Section 10.2.6.3" ::= { lldpXMedLocalData 4 } lldpXMedLocSerialNum OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(0..32)) -- Rsyntax OCTET STRING(SIZE(0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The vendor-specific serial number as advertised by the endpoint." REFERENCE " ANSI/TIA-1057, Section 10.2.6.4" ::= { lldpXMedLocalData 5 } lldpXMedLocMfgName OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(0..32)) -- Rsyntax OCTET STRING(SIZE(0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The vendor-specific manufacturer name as advertised by the endpoint." REFERENCE " ANSI/TIA-1057, Section 10.2.6.5" ::= { lldpXMedLocalData 6 } lldpXMedLocModelName OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(0..32)) -- Rsyntax OCTET STRING(SIZE(0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The vendor-specific model name as advertised by the endpoint." REFERENCE " ANSI/TIA-1057, Section 10.2.6.6" ::= { lldpXMedLocalData 7 } lldpXMedLocAssetID OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(0..32)) -- Rsyntax OCTET STRING(SIZE(0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The vendor-specific asset tracking identifier as advertised by the endpoint." REFERENCE " ANSI/TIA-1057, Section 10.2.6.7" ::= { lldpXMedLocalData 8 } lldpXMedLocLocationTable OBJECT-TYPE SYNTAX SEQUENCE OF LldpXMedLocLocationEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains Location information as advertised by the local system. The information may be configured per port by a Location Information Server (LIS) or other management application. Multiple Location TLVs of different subtypes may be transmitted in the same PDU. The information in this table MUST be stored in non-volatile-memory and persist over restart/reboot sequences." ::= { lldpXMedLocalData 9 } lldpXMedLocLocationEntry OBJECT-TYPE SYNTAX LldpXMedLocLocationEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about Location information for the local device." INDEX { lldpLocPortNum, lldpXMedLocLocationSubtype } ::= { lldpXMedLocLocationTable 1 } LldpXMedLocLocationEntry ::= SEQUENCE { lldpXMedLocLocationSubtype LocationSubtype, lldpXMedLocLocationInfo OCTET STRING } lldpXMedLocLocationSubtype OBJECT-TYPE SYNTAX LocationSubtype -- Rsyntax INTEGER { -- unknown(1), -- coordinateBased(2), -- civicAddress(3), -- elin(4) -- } ACCESS not-accessible STATUS mandatory DESCRIPTION "The location subtype advertised by the local device." REFERENCE "ANSI/TIA-1057, Section 10.2.4.2" ::= { lldpXMedLocLocationEntry 1 } lldpXMedLocLocationInfo OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..256)) ACCESS read-write STATUS mandatory DESCRIPTION "The location information. Parsing of this information is dependent upon the location subtype, as defined by the value of the lldpXMedLocLocationSubtype object. " REFERENCE "ANSI/TIA-1057, Section 10.2.4.3" DEFVAL { "" } ::= { lldpXMedLocLocationEntry 2 } lldpXMedLocXPoEDeviceType OBJECT-TYPE SYNTAX INTEGER { unknown(1), pseDevice(2), pdDevice(3), none(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Defines the type of Power-via-MDI (Power over Ethernet) advertised by the local device. A value pseDevice(2) indicates that the device is advertised as a Power Sourcing Entity (PSE). A value pdDevice(3) indicates that the device is advertised as a Powered Device (PD). A value of none(4) indicates that the device does not support PoE." REFERENCE "ANSI/TIA-1057, Section 10.2.5.1" ::= { lldpXMedLocalData 10 } lldpXMedLocXPoEPSEPortTable OBJECT-TYPE SYNTAX SEQUENCE OF LldpXMedLocXPoEPSEPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains one row per port of PSE PoE information on the local system known to this agent." ::= { lldpXMedLocalData 11 } lldpXMedLocXPoEPSEPortEntry OBJECT-TYPE SYNTAX LldpXMedLocXPoEPSEPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a particular port PoE information." INDEX { lldpLocPortNum } ::= { lldpXMedLocXPoEPSEPortTable 1 } LldpXMedLocXPoEPSEPortEntry ::= SEQUENCE { lldpXMedLocXPoEPSEPortPowerAv Gauge, lldpXMedLocXPoEPSEPortPDPriority INTEGER } lldpXMedLocXPoEPSEPortPowerAv OBJECT-TYPE SYNTAX Gauge(0..1023) -- Units -- tenth of watt ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the value of the power available from the PSE via this port expressed in units of 0.1 watts." REFERENCE " ANSI/TIA-1057, Section 10.2.5.4 " ::= { lldpXMedLocXPoEPSEPortEntry 1 } lldpXMedLocXPoEPSEPortPDPriority OBJECT-TYPE SYNTAX INTEGER { unknown(1), critical(2), high(3), low(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Reflects the PD power priority that is being advertised on this PSE port. If both locally configure priority and ldpXMedRemXPoEPDPowerPriority are available on this port, it is a matter of local policy which one takes precedence. This object reflects the active value on this port. If the priority is not configured or known by the PD, the value unknown(1) will be returned. A value critical(2) indicates that the device advertises its power Priority as critical, as per RFC 3621. A value high(3) indicates that the device advertises its power Priority as high, as per RFC 3621. A value low(4) indicates that the device advertises its power Priority as low, as per RFC 3621." REFERENCE "ANSI/TIA-1057, Section 10.2.5.3" ::= { lldpXMedLocXPoEPSEPortEntry 2 } lldpXMedLocXPoEPSEPowerSource OBJECT-TYPE SYNTAX INTEGER { unknown(1), primary(2), backup(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Defines the type of PSE Power Source advertised by the local device. A value primary(2) indicates that the device advertises its power source as primary. A value backup(3) indicates that the device advertises its power Source as backup." REFERENCE "ANSI/TIA-1057, Section 10.2.5.2" ::= { lldpXMedLocalData 12 } lldpXMedLocXPoEPDPowerReq OBJECT-TYPE SYNTAX Gauge(0..1023) -- Units -- tenth of watt ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the value of the power required by a PD expressed in units of 0.1 watts." REFERENCE " ANSI/TIA-1057, Section 10.2.4.3 " ::= { lldpXMedLocalData 13 } lldpXMedLocXPoEPDPowerSource OBJECT-TYPE SYNTAX INTEGER { unknown(1), fromPSE(2), local(3), localAndPSE(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Defines the type of Power Source advertised as being used by the local device. A value fromPSE(2) indicates that the device advertises its power source as received from a PSE. A value local(3) indicates that the device advertises its power source as local. A value localAndPSE(4) indicates that the device advertises its power source as using both local and PSE power." REFERENCE "ANSI/TIA-1057, Section 10.2.5.2" ::= { lldpXMedLocalData 14 } lldpXMedLocXPoEPDPowerPriority OBJECT-TYPE SYNTAX INTEGER { unknown(1), critical(2), high(3), low(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Defines the priority advertised as being required by this PD. A value critical(2) indicates that the device advertises its power Priority as critical, as per RFC 3621. A value high(3) indicates that the device advertises its power Priority as high, as per RFC 3621. A value low(4) indicates that the device advertises its power Priority as low, as per RFC 3621." REFERENCE "ANSI/TIA-1057, Section 10.2.5.3" ::= { lldpXMedLocalData 15 } lldpXMedRemCapabilitiesTable OBJECT-TYPE SYNTAX SEQUENCE OF LldpXMedRemCapabilitiesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that displays LLDP-MED capabilities of remote devices connected to individual ports." ::= { lldpXMedRemoteData 1 } lldpXMedRemCapabilitiesEntry OBJECT-TYPE SYNTAX LldpXMedRemCapabilitiesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "LLDP-MED capabilities of remote devices connected to the device ports and communicating via LLDP-MED. The remote tables in the LLDP-MED MIB excepting this table may be sparsely populate. An entry in one of these table is meaningful and shall be populated by the agent only if the corresponding bits for the respective function are set in the objects in this table. " INDEX { lldpRemTimeMark, lldpRemLocalPortNum, lldpRemIndex } ::= { lldpXMedRemCapabilitiesTable 1 } LldpXMedRemCapabilitiesEntry ::= SEQUENCE { lldpXMedRemCapSupported LldpXMedCapabilities, lldpXMedRemCapCurrent LldpXMedCapabilities, lldpXMedRemDeviceClass LldpXMedDeviceClass } lldpXMedRemCapSupported OBJECT-TYPE SYNTAX LldpXMedCapabilities -- Rsyntax OCTET STRING(SIZE(1..2)) -- BITS are: -- capabilities(0) -- networkPolicy(1) -- location(2) -- extendedPSE(3) -- extendedPD(4) -- inventory(5) ACCESS read-only STATUS mandatory DESCRIPTION "The bitmap includes the MED organizationally defined set of LLDP TLVs whose transmission is possible on the LLDP agent of the remote device connected to this port. Each bit in the bitmap corresponds to an LLDP-MED subtype associated with a specific TIA TR41.4 MED optional TLV. If the bit is set, the agent has the capability to support the corresponding TLV." REFERENCE "ANSI/TIA-1057, Sections 10.2.2.1" ::= { lldpXMedRemCapabilitiesEntry 1 } lldpXMedRemCapCurrent OBJECT-TYPE SYNTAX LldpXMedCapabilities -- Rsyntax OCTET STRING(SIZE(1..2)) -- BITS are: -- capabilities(0) -- networkPolicy(1) -- location(2) -- extendedPSE(3) -- extendedPD(4) -- inventory(5) ACCESS read-only STATUS mandatory DESCRIPTION "The bitmap includes the MED organizationally defined set of LLDP TLVs whose transmission is possible on the LLDP agent of the remote device connected to this port. Each bit in the bitmap corresponds to an LLDP-MED subtype associated with a specific TIA TR41.4 MED optional TLV. If the bit is set, the agent currently supports the corresponding TLV." REFERENCE "ANSI/TIA-1057, Sections 10.2.2.1" ::= { lldpXMedRemCapabilitiesEntry 2 } lldpXMedRemDeviceClass OBJECT-TYPE SYNTAX LldpXMedDeviceClass -- Rsyntax INTEGER { -- ?? enum value of zero may cause problems -- notDefined(0), -- endpointClass1(1), -- endpointClass2(2), -- endpointClass3(3), -- networkConnectivity(4) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Device Class as advertised by the device remotely connected to the port." REFERENCE " ANSI/TIA-1057, Section 10.2.2.2" ::= { lldpXMedRemCapabilitiesEntry 3 } lldpXMedRemMediaPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF LldpXMedRemMediaPolicyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains media policy information as advertised by the remote system. This table may be sparsely populated. Entries in this table are relevant only if the networkPolicy(0) bits in the lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the corresponding ports are set." ::= { lldpXMedRemoteData 2 } lldpXMedRemMediaPolicyEntry OBJECT-TYPE SYNTAX LldpXMedRemMediaPolicyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about the per port per policy type policy information for a particular physical network connection." INDEX { lldpRemTimeMark, lldpRemLocalPortNum, lldpRemIndex, lldpXMedRemMediaPolicyAppType } ::= { lldpXMedRemMediaPolicyTable 1 } LldpXMedRemMediaPolicyEntry ::= SEQUENCE { lldpXMedRemMediaPolicyAppType PolicyAppType, lldpXMedRemMediaPolicyVlanID INTEGER, lldpXMedRemMediaPolicyPriority INTEGER, lldpXMedRemMediaPolicyDscp Dscp, lldpXMedRemMediaPolicyUnknown TruthValue, lldpXMedRemMediaPolicyTagged TruthValue } lldpXMedRemMediaPolicyAppType OBJECT-TYPE SYNTAX PolicyAppType -- Rsyntax OCTET STRING(SIZE(1..2)) -- BITS are: -- unknown(0) -- voice(1) -- voiceSignaling(2) -- guestVoice(3) -- guestVoiceSignaling(4) -- softPhoneVoice(5) -- videoconferencing(6) -- streamingVideo(7) -- videoSignaling(8) ACCESS not-accessible STATUS mandatory DESCRIPTION "The media type that defines the primary function of the application for the policy advertised by the endpoint connected remotely to this port." REFERENCE "ANSI/TIA-1057, Section 10.2.3.1" ::= { lldpXMedRemMediaPolicyEntry 1 } lldpXMedRemMediaPolicyVlanID OBJECT-TYPE SYNTAX INTEGER(0|1..4094|4095) ACCESS read-only STATUS mandatory DESCRIPTION "An extension of the VLAN Identifier for the remote system connected to this port, as defined in IEEE 802.1P-1998. A value of 1 through 4094 is used to define a valid PVID. A value of 0 shall be used if the device is using priority tagged frames, meaning that only the 802.1p priority level is significant and the default VID of the ingress port is being used instead. A value of 4095 is reserved for implementation use." REFERENCE " ANSI/TIA-1057, Section 10.2.3.5" ::= { lldpXMedRemMediaPolicyEntry 2 } lldpXMedRemMediaPolicyPriority OBJECT-TYPE SYNTAX INTEGER(0..7) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the value of the 802.1p priority which is associated with the remote system connected at given port." REFERENCE " ANSI/TIA-1057, Section 10.2.3.6" ::= { lldpXMedRemMediaPolicyEntry 3 } lldpXMedRemMediaPolicyDscp OBJECT-TYPE SYNTAX Dscp -- Rsyntax INTEGER(0..63) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the value of the Differentiated Service Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 which is associated with remote system connected at the port." REFERENCE " ANSI/TIA-1057, Section 10.2.3.7" ::= { lldpXMedRemMediaPolicyEntry 4 } lldpXMedRemMediaPolicyUnknown OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "A value of 'true' indicates that the network policy for the specified application type is currently unknown. In this case, the VLAN ID, the layer 2 priority and the DSCP value fields are ignored. A value of 'false' indicates that this network policy is defined." REFERENCE " ANSI/TIA-1057, Section 10.2.3.2" ::= { lldpXMedRemMediaPolicyEntry 5 } lldpXMedRemMediaPolicyTagged OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "A value of 'true' indicates that the application is using a tagged VLAN. A value of 'false' indicates that for the specific application the device either is using an untagged VLAN or does not support port based VLAN operation. In this case, both the VLAN ID and the Layer 2 priority fields are ignored and only the DSCP value has relevance " REFERENCE " ANSI/TIA-1057, Section 10.2.3.3" ::= { lldpXMedRemMediaPolicyEntry 6 } lldpXMedRemInventoryTable OBJECT-TYPE SYNTAX SEQUENCE OF LldpXMedRemInventoryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains inventory information as advertised by the remote system. This table may be sparsely populated. Entries in this table are relevant only if the inventory(2) bits in the lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the corresponding ports are set " ::= { lldpXMedRemoteData 3 } lldpXMedRemInventoryEntry OBJECT-TYPE SYNTAX LldpXMedRemInventoryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about inventory information for the remote devices connected to the ports." INDEX { lldpRemTimeMark, lldpRemLocalPortNum, lldpRemIndex } ::= { lldpXMedRemInventoryTable 1 } LldpXMedRemInventoryEntry ::= SEQUENCE { lldpXMedRemHardwareRev SnmpAdminString, lldpXMedRemFirmwareRev SnmpAdminString, lldpXMedRemSoftwareRev SnmpAdminString, lldpXMedRemSerialNum SnmpAdminString, lldpXMedRemMfgName SnmpAdminString, lldpXMedRemModelName SnmpAdminString, lldpXMedRemAssetID SnmpAdminString } lldpXMedRemHardwareRev OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(0..32)) -- Rsyntax OCTET STRING(SIZE(0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The vendor-specific hardware revision string as advertised by the remote endpoint." REFERENCE " ANSI/TIA-1057, Section 10.2.6.1" ::= { lldpXMedRemInventoryEntry 1 } lldpXMedRemFirmwareRev OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(0..32)) -- Rsyntax OCTET STRING(SIZE(0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The vendor-specific firmware revision string as advertised by the remote endpoint." REFERENCE " ANSI/TIA-1057, Section 10.2.6.2" ::= { lldpXMedRemInventoryEntry 2 } lldpXMedRemSoftwareRev OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(0..32)) -- Rsyntax OCTET STRING(SIZE(0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The vendor-specific software revision string as advertised by the remote endpoint." REFERENCE " ANSI/TIA-1057, Section 10.2.6.3" ::= { lldpXMedRemInventoryEntry 3 } lldpXMedRemSerialNum OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(0..32)) -- Rsyntax OCTET STRING(SIZE(0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The vendor-specific serial number as advertised by the remote endpoint." REFERENCE " ANSI/TIA-1057, Section 10.2.6.4" ::= { lldpXMedRemInventoryEntry 4 } lldpXMedRemMfgName OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(0..32)) -- Rsyntax OCTET STRING(SIZE(0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The vendor-specific manufacturer name as advertised by the remote endpoint." REFERENCE " ANSI/TIA-1057, Section 10.2.6.5" ::= { lldpXMedRemInventoryEntry 5 } lldpXMedRemModelName OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(0..32)) -- Rsyntax OCTET STRING(SIZE(0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The vendor-specific model name as advertised by the remote endpoint." REFERENCE " ANSI/TIA-1057, Section 10.2.6.6" ::= { lldpXMedRemInventoryEntry 6 } lldpXMedRemAssetID OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(0..32)) -- Rsyntax OCTET STRING(SIZE(0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The vendor-specific asset tracking identifier as advertised by the remote endpoint." REFERENCE " ANSI/TIA-1057, Section 10.2.6.7" ::= { lldpXMedRemInventoryEntry 7 } lldpXMedRemLocationTable OBJECT-TYPE SYNTAX SEQUENCE OF LldpXMedRemLocationEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains Location information as advertised by the remote system. This table may be sparsely populated. Entries in this table are relevant only if the Location(3) bits in the lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the corresponding ports are set " ::= { lldpXMedRemoteData 4 } lldpXMedRemLocationEntry OBJECT-TYPE SYNTAX LldpXMedRemLocationEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about Location information for the remote devices connected to the ports." INDEX { lldpRemTimeMark, lldpRemLocalPortNum, lldpRemIndex, lldpXMedRemLocationSubtype } ::= { lldpXMedRemLocationTable 1 } LldpXMedRemLocationEntry ::= SEQUENCE { lldpXMedRemLocationSubtype LocationSubtype, lldpXMedRemLocationInfo OCTET STRING } lldpXMedRemLocationSubtype OBJECT-TYPE SYNTAX LocationSubtype -- Rsyntax INTEGER { -- unknown(1), -- coordinateBased(2), -- civicAddress(3), -- elin(4) -- } ACCESS not-accessible STATUS mandatory DESCRIPTION "The location subtype advertised by the remote endpoint." REFERENCE "ANSI/TIA-1057, Section 10.2.4.2 " ::= { lldpXMedRemLocationEntry 1 } lldpXMedRemLocationInfo OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..256)) ACCESS read-only STATUS mandatory DESCRIPTION "The location information advertised by the remote endpoint. Parsing of this information is dependent upon the location subtype, as defined by the value of the corresponding lldpXMedRemLocationSubType object. " REFERENCE "ANSI/TIA-1057, Section 10.2.4.3 " ::= { lldpXMedRemLocationEntry 2 } lldpXMedRemXPoETable OBJECT-TYPE SYNTAX SEQUENCE OF LldpXMedRemXPoEEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains information about the PoE device type as advertised by the remote system. This table is densely populated." ::= { lldpXMedRemoteData 5 } lldpXMedRemXPoEEntry OBJECT-TYPE SYNTAX LldpXMedRemXPoEEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about PoE type of the remote devices connected to the ports." INDEX { lldpRemTimeMark, lldpRemLocalPortNum, lldpRemIndex } ::= { lldpXMedRemXPoETable 1 } LldpXMedRemXPoEEntry ::= SEQUENCE { lldpXMedRemXPoEDeviceType INTEGER } lldpXMedRemXPoEDeviceType OBJECT-TYPE SYNTAX INTEGER { unknown(1), pseDevice(2), pdDevice(3), none(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Defines the type of Power-via-MDI (Power over Ethernet) advertised by the remote device. A value pseDevice(2) indicates that the device is advertised as a Power Sourcing Entity (PSE). A value pdDevice(3) indicates that the device is advertised as a Powered Device (PD). A value none(4) indicates that the device does not support PoE." REFERENCE "ANSI/TIA-1057, Section 10.2.5.1" ::= { lldpXMedRemXPoEEntry 1 } lldpXMedRemXPoEPSETable OBJECT-TYPE SYNTAX SEQUENCE OF LldpXMedRemXPoEPSEEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains extended PoE information as advertised by the remote devices of PSE type. This table may be sparsely populated. Entries in this table are relevant only if the extendedPSE(4) bits in the lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the corresponding ports are set " ::= { lldpXMedRemoteData 6 } lldpXMedRemXPoEPSEEntry OBJECT-TYPE SYNTAX LldpXMedRemXPoEPSEEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about Extended PoE PSE information for the remote devices connected to the ports." INDEX { lldpRemTimeMark, lldpRemLocalPortNum, lldpRemIndex } ::= { lldpXMedRemXPoEPSETable 1 } LldpXMedRemXPoEPSEEntry ::= SEQUENCE { lldpXMedRemXPoEPSEPowerAv Gauge, lldpXMedRemXPoEPSEPowerSource INTEGER, lldpXMedRemXPoEPSEPowerPriority INTEGER } lldpXMedRemXPoEPSEPowerAv OBJECT-TYPE SYNTAX Gauge(0..1023) -- Units -- tenth of watt ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the value of the power available from the PSE via this port expressed in units of 0.1 watts on the remote device." REFERENCE " ANSI/TIA-1057, Section 10.2.5.4" ::= { lldpXMedRemXPoEPSEEntry 1 } lldpXMedRemXPoEPSEPowerSource OBJECT-TYPE SYNTAX INTEGER { unknown(1), primary(2), backup(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Defines the type of PSE Power Source advertised by the remote device. A value primary(2) indicates that the device advertises its power source as primary. A value backup(3) indicates that the device advertises its power Source as backup." REFERENCE "ANSI/TIA-1057, Section 10.2.5.2" ::= { lldpXMedRemXPoEPSEEntry 2 } lldpXMedRemXPoEPSEPowerPriority OBJECT-TYPE SYNTAX INTEGER { unknown(1), critical(2), high(3), low(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the value of the PSE power priority advertised by the remote device. A value critical(2) indicates that the device advertises its power priority as critical, as per RFC 3621. A value high(3) indicates that the device advertises its power priority as high, as per RFC 3621. A value low(4) indicates that the device advertises its power priority as low, as per RFC 3621." REFERENCE "ANSI/TIA-1057, Section 10.2.5.3" ::= { lldpXMedRemXPoEPSEEntry 3 } lldpXMedRemXPoEPDTable OBJECT-TYPE SYNTAX SEQUENCE OF LldpXMedRemXPoEPDEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains extended PoE information as advertised by the remote devices of PD type. This table may be sparsely populated. Entries in this table are relevant only if the extendedPD(5) bits in the lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the corresponding ports are set " ::= { lldpXMedRemoteData 7 } lldpXMedRemXPoEPDEntry OBJECT-TYPE SYNTAX LldpXMedRemXPoEPDEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about XPoEPD information for the remote devices connected to the ports." INDEX { lldpRemTimeMark, lldpRemLocalPortNum, lldpRemIndex } ::= { lldpXMedRemXPoEPDTable 1 } LldpXMedRemXPoEPDEntry ::= SEQUENCE { lldpXMedRemXPoEPDPowerReq Gauge, lldpXMedRemXPoEPDPowerSource INTEGER, lldpXMedRemXPoEPDPowerPriority INTEGER } lldpXMedRemXPoEPDPowerReq OBJECT-TYPE SYNTAX Gauge(0..1023) -- Units -- tenth of watt ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the value of the power required by a PD connected remotely to the port expressed in units of 0.1 watts." REFERENCE " ANSI/TIA-1057, Section 10.2.5.4 " ::= { lldpXMedRemXPoEPDEntry 1 } lldpXMedRemXPoEPDPowerSource OBJECT-TYPE SYNTAX INTEGER { unknown(1), fromPSE(2), local(3), localAndPSE(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Defines the type of Power Source advertised as being used by the device connected remotely to the port. A value fromPSE(2) indicates that the device advertises its power source as received from a PSE. A value local(3) indicates that the device advertises its power source as local. A value localAndPSE(4) indicates that the device advertises its power source as using both local and PSE power." REFERENCE "ANSI/TIA-1057, Section 10.2.5.2" ::= { lldpXMedRemXPoEPDEntry 2 } lldpXMedRemXPoEPDPowerPriority OBJECT-TYPE SYNTAX INTEGER { unknown(1), critical(2), high(3), low(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Defines the priority advertised as being required by the PD connected remotely to the port. A value critical(2) indicates that the device advertises its power Priority as critical, as per RFC 3621. A value high(3) indicates that the device advertises its power Priority as high, as per RFC 3621. A value low(4) indicates that the device advertises its power Priority as low, as per RFC 3621." REFERENCE "ANSI/TIA-1057, Section 10.2.5.3" ::= { lldpXMedRemXPoEPDEntry 3 } lldpXMedTopologyChangeDetected TRAP-TYPE -- Reverse mappable trap ENTERPRISE lldpXMedMIB VARIABLES { lldpRemChassisIdSubtype, lldpRemChassisId, lldpXMedRemDeviceClass } -- Status -- mandatory DESCRIPTION "A notification generated by the local device sensing a change in the topology that indicates that a new remote device attached to a local port, or a remote device disconnected or moved from one port to another." ::= 1 lldpXMedConfigGroup OBJECT IDENTIFIER ::= { lldpXMedGroups 1 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- The collection of objects which are used to configure or -- describe the configuration or behavior of the LLDP-MED -- organizational extension implementation. -- objects -- lldpXMedPortCapSupported, lldpXMedPortConfigTLVsTxEnable, -- lldpXMedPortConfigNotifEnable, lldpXMedFastStartRepeatCount, -- lldpXMedLocXPoEDeviceType, lldpXMedLocDeviceClass lldpXMedOptMediaPolicyGroup OBJECT IDENTIFIER ::= { lldpXMedGroups 2 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- The collection of objects which are used to represent LLDP -- MED organizational extensions for Media Policy Information. -- objects -- lldpXMedLocMediaPolicyVlanID, lldpXMedLocMediaPolicyPriority, -- lldpXMedLocMediaPolicyDscp, lldpXMedLocMediaPolicyUnknown, -- lldpXMedLocMediaPolicyTagged lldpXMedOptInventoryGroup OBJECT IDENTIFIER ::= { lldpXMedGroups 3 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- The collection of objects which are used to represent LLDP -- MED organizational extension for inventory Information. -- objects -- lldpXMedLocHardwareRev, lldpXMedLocFirmwareRev, -- lldpXMedLocSoftwareRev, lldpXMedLocSerialNum, -- lldpXMedLocMfgName, lldpXMedLocModelName, lldpXMedLocAssetID lldpXMedOptLocationGroup OBJECT IDENTIFIER ::= { lldpXMedGroups 4 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- The collection of objects which are used to represent LLDP -- MED organizational extension for Location Information. -- objects -- lldpXMedLocLocationInfo lldpXMedOptPoEPSEGroup OBJECT IDENTIFIER ::= { lldpXMedGroups 5 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- The collection of objects which are used to represent LLDP -- MED organizational extensions for PoE PSE Information. -- objects -- lldpXMedLocXPoEPSEPortPowerAv, -- lldpXMedLocXPoEPSEPortPDPriority, -- lldpXMedLocXPoEPSEPowerSource lldpXMedOptPoEPDGroup OBJECT IDENTIFIER ::= { lldpXMedGroups 6 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- The collection of objects which are used to represent LLDP -- MED organizational extensions for PoE PD Information. -- objects -- lldpXMedLocXPoEPDPowerReq, lldpXMedLocXPoEPDPowerSource, -- lldpXMedLocXPoEPDPowerPriority lldpXMedRemSysGroup OBJECT IDENTIFIER ::= { lldpXMedGroups 7 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- The collection of objects which are used to represent LLDP- -- MED organizational extension Remote Device Information. -- objects -- lldpXMedRemCapSupported, lldpXMedRemCapCurrent, -- lldpXMedRemDeviceClass, lldpXMedRemMediaPolicyVlanID, -- lldpXMedRemMediaPolicyPriority, lldpXMedRemMediaPolicyDscp, -- lldpXMedRemMediaPolicyUnknown, lldpXMedRemMediaPolicyTagged, -- lldpXMedRemHardwareRev, lldpXMedRemFirmwareRev, -- lldpXMedRemSoftwareRev, lldpXMedRemSerialNum, -- lldpXMedRemMfgName, lldpXMedRemModelName, lldpXMedRemAssetID, -- lldpXMedRemLocationInfo, lldpXMedRemXPoEDeviceType, -- lldpXMedRemXPoEPSEPowerAv, lldpXMedRemXPoEPSEPowerSource, -- lldpXMedRemXPoEPSEPowerPriority, lldpXMedRemXPoEPDPowerReq, -- lldpXMedRemXPoEPDPowerSource, lldpXMedRemXPoEPDPowerPriority lldpXMedNotificationsGroup OBJECT IDENTIFIER ::= { lldpXMedGroups 8 } -- NOTIFICATION-GROUP -- Status -- mandatory -- Descr -- Notifications sent by an LLDP-MED agent. -- notifications -- lldpXMedTopologyChangeDetected lldpXMedCompliance OBJECT IDENTIFIER ::= { lldpXMedCompliances 1 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- The compliance statement for SNMP entities which implement -- the LLDP MED extension MIB. -- Module -- >>current<< -- MandGroup -- lldpXMedConfigGroup -- MandGroup -- lldpXMedRemSysGroup -- MandGroup -- lldpXMedNotificationsGroup -- OptGroup -- lldpXMedOptMediaPolicyGroup -- OptGroup -- lldpXMedOptInventoryGroup -- OptGroup -- lldpXMedOptLocationGroup -- OptGroup -- lldpXMedOptPoEPSEGroup -- OptGroup -- lldpXMedOptPoEPDGroup END