-- MIB file created 02-Nov-2001 14:10:33, by -- SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com MPLS-LSR-MIB DEFINITIONS ::= BEGIN -- From file: "MPLS-LSR-MIB.my" -- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T" IMPORTS experimental FROM SNMPv2-SMI-v1 TruthValue, RowStatus, StorageType, RowPointer, TimeStamp FROM SNMPv2-TC-v1 InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB AddressFamilyNumbers FROM IANA-ADDRESS-FAMILY-NUMBERS-MIB InetAddressIPv4, InetAddressIPv6, InetAddressType FROM INET-ADDRESS-MIB Counter, Gauge FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215; mplsLsrMIB OBJECT IDENTIFIER ::= { experimental 96 } -- MODULE-IDENTITY -- LastUpdated -- 200004261200Z -- OrgName -- Multiprotocol Label Switching (MPLS) Working Group -- ContactInfo -- Cheenu Srinivasan -- Postal: Tachion Networks, Inc. -- Monmouth Park Corporate Center I -- Building C, 185 Monmouth Parkway -- West Long Branch, NJ 07764 -- Tel: +1-732-542-7750 x1234 -- Email: cheenu@tachion.com -- -- Arun Viswanathan -- Postal: Force10 Networks, Inc. -- 1440 McCarthy Blvd -- Milpitas, CA 95035 -- Tel: +1-408-571-3516 -- Email: arun@force10networks.com -- -- Thomas D. Nadeau -- Postal: Cisco Systems, Inc. -- 250 Apollo Drive -- Chelmsford, MA 01824 -- Tel: +1-978-244-3051 -- Email: tnadeau@cisco.com -- Descr -- This MIB contains managed object definitions for the -- Multiprotocol Label Switching (MPLS) Router as -- defined in: Rosen, E., Viswanathan, A., and R. -- Callon, Multiprotocol Label Switching Architecture, -- Internet Draft , -- February 2000. -- RevDate -- 199906161200Z -- RevDescr -- Initial draft version. -- RevDate -- 200002161200Z -- RevDescr -- Second draft version. -- RevDate -- 200003061200Z -- RevDescr -- Third draft version. -- RevDate -- 200004211200Z -- RevDescr -- Fourth draft version. Made corrections from WG Last -- Call comments. -- RevDate -- 200004261200Z -- RevDescr -- Fifth draft version. Made minor typographical corrections -- noted from WG mailing list. mplsLsrObjects OBJECT IDENTIFIER ::= { mplsLsrMIB 1 } mplsLsrNotifications OBJECT IDENTIFIER ::= { mplsLsrMIB 2 } mplsLsrConformance OBJECT IDENTIFIER ::= { mplsLsrMIB 3 } mplsLsrGroups OBJECT IDENTIFIER ::= { mplsLsrConformance 1 } mplsLsrCompliances OBJECT IDENTIFIER ::= { mplsLsrConformance 2 } MplsLSPID ::= OCTET STRING(SIZE(0..31)) -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- An identifier that is assigned to each LSP and is -- used to uniquely identify it. This is assigned at -- the head end of the LSP and can be used by all LSRs -- to identify this LSP. This value is piggybacked by -- the signaling protocol when this LSP is signaled -- within the network. This identifier can then be -- used at each LSR to identify which labels are being -- swapped to other labels for this LSP. For IPv4 -- addresses this results in a 6-octet long cookie. MplsLabel ::= Gauge(0..4294967295) -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- This value represents an MPLS label. Note that the -- contents of a label field are interpreted in an -- interface-type specific fashion. For example, the -- 20-bit wide label carried in the MPLS shim header is -- contained in bits 0-19 and bits 20-31 must be zero. -- The frame relay label can be either 10 or 23 bits -- wide depending on the size of the DLCI field and -- bits 10-31, or 23-31 must be zero, respectively. -- For an ATM interface, bits 0-15 must be interpreted -- as the VCI, bits 16-23 as the VPI and bits 24-31 -- must be zero. Note that the permissible label -- values are also a function of the interface type. -- For example, the value 3 has special semantics in -- the control plane for an MPLS shim header label and -- is not a valid label value in the data path. -- Refer -- 1. MPLS Label Stack Encoding, Rosen et al, draft- -- ietf-mpls-label-encaps-07.txt, March 2000. -- 2. Use of Label Switching on Frame Relay Networks, -- Conta et al, draft-ietf-mpls-fr-03.txt, Nov. -- 1998. -- 3. MPLS using LDP and ATM VC switching, Davie et al, -- draft-ietf-mpls-atm-02.txt, April 1999. MplsBitRate ::= INTEGER(1..2147483647) -- TEXTUAL-CONVENTION -- DspHint -- d -- Status -- mandatory -- Descr -- An estimate of bandwidth in units of 1,000 bits per -- second. If this object reports a value of 'n' then -- the rate of the object is somewhere in the range of -- 'n-500' to 'n+499'. For objects which do not vary in -- bitrate, or for those where no accurate estimation -- can be made, this object should contain the nominal -- bitrate. MplsBurstSize ::= INTEGER(1..2147483647) -- TEXTUAL-CONVENTION -- DspHint -- d -- Status -- mandatory -- Descr -- The number of octets of MPLS data that the stream -- may send back-to-back without concern for policing. MplsBufferSize ::= INTEGER(1..2147483647) -- TEXTUAL-CONVENTION -- DspHint -- d -- Status -- mandatory -- Descr -- Size of buffer in octets of MPLS data. MplsObjectOwner ::= INTEGER { other(1), snmp(2), ldp(3), rsvp(4), policyAgent(5), unknown(6) } -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- The entity which owns the object in question. mplsInterfaceConfTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsInterfaceConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table specifies per-interface MPLS capability and associated information." ::= { mplsLsrObjects 1 } mplsInterfaceConfEntry OBJECT-TYPE SYNTAX MplsInterfaceConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in this table is created by an LSR for every interface capable of supporting MPLS. The entry with index 0 represents the per-platform label space and contains parameters that apply to all interfaces that participate in the per-platform label space. Other entries defined in this table represent additional MPLS interfaces that may participate in either the per-platform or per- interface label spaces, or both. Additional information about label space participation of an interface is provided in the description clause of mplsInterfaceLabelParticipationType." INDEX { mplsInterfaceConfIndex } ::= { mplsInterfaceConfTable 1 } MplsInterfaceConfEntry ::= SEQUENCE { mplsInterfaceConfIndex InterfaceIndexOrZero, mplsInterfaceLabelMinIn MplsLabel, mplsInterfaceLabelMaxIn MplsLabel, mplsInterfaceLabelMinOut MplsLabel, mplsInterfaceLabelMaxOut MplsLabel, mplsInterfaceTotalBandwidth MplsBitRate, mplsInterfaceAvailableBandwidth MplsBitRate, mplsInterfaceTotalBuffer MplsBufferSize, mplsInterfaceAvailableBuffer MplsBufferSize, mplsInterfaceLabelParticipationType OCTET STRING, mplsInterfaceConfStorageType StorageType } mplsInterfaceConfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero -- Rsyntax INTEGER(0..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a unique index for an entry in the MplsInterfaceConfTable. A non-zero index for an entry indicates the ifIndex for the corresponding interface entry in of the MPLS-layer in the ifTable. Note that the per-platform label space may apply to several interfaces, and therefore the configuration of the per-platform label space interface parameters will apply to all of the interfaces that are participating in the per-platform label space." REFERENCE "RFC 2233 - The Interfaces Group MIB using SMIv2, McCloghrie, K., and F. Kastenholtz, Nov. 1997" ::= { mplsInterfaceConfEntry 1 } mplsInterfaceLabelMinIn OBJECT-TYPE SYNTAX MplsLabel -- Rsyntax Gauge(0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This is the minimum value of an MPLS label that this LSR is willing to receive on this interface." ::= { mplsInterfaceConfEntry 2 } mplsInterfaceLabelMaxIn OBJECT-TYPE SYNTAX MplsLabel -- Rsyntax Gauge(0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This is the maximum value of an MPLS label that this LSR is willing to receive on this interface." ::= { mplsInterfaceConfEntry 3 } mplsInterfaceLabelMinOut OBJECT-TYPE SYNTAX MplsLabel -- Rsyntax Gauge(0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This is the minimum value of an MPLS label that this LSR is willing to send on this interface." ::= { mplsInterfaceConfEntry 4 } mplsInterfaceLabelMaxOut OBJECT-TYPE SYNTAX MplsLabel -- Rsyntax Gauge(0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This is the maximum value of an MPLS label that this LSR is willing to send on this interface." ::= { mplsInterfaceConfEntry 5 } mplsInterfaceTotalBandwidth OBJECT-TYPE SYNTAX MplsBitRate -- Rsyntax INTEGER(1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the total amount of usable bandwidth on this interface and is specified in kilobits per second (Kbps). This variable is not applicable when applied to the interface with index 0." ::= { mplsInterfaceConfEntry 6 } mplsInterfaceAvailableBandwidth OBJECT-TYPE SYNTAX MplsBitRate -- Rsyntax INTEGER(1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the total amount of available bandwidth available on this interface and is specified in kilobits per second (Kbps). This value is calculated as the difference between the amount of bandwidth currently in use and that specified in mplsInterfaceTotalBandwidth. This variable is not applicable when applied to the interface with index 0." ::= { mplsInterfaceConfEntry 7 } mplsInterfaceTotalBuffer OBJECT-TYPE SYNTAX MplsBufferSize -- Rsyntax INTEGER(1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the total amount of buffer space allocated for this interface. This variable is not applicable when applied to the interface with index 0." ::= { mplsInterfaceConfEntry 8 } mplsInterfaceAvailableBuffer OBJECT-TYPE SYNTAX MplsBufferSize -- Rsyntax INTEGER(1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This value reflects the total amount of buffer space available on this interface. This variable is not applicable when applied to the interface with index 0." ::= { mplsInterfaceConfEntry 9 } mplsInterfaceLabelParticipationType OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..2)) -- BITS are: -- perPlatform(0) -- perInterface(1) ACCESS read-only STATUS mandatory DESCRIPTION "Either the perPlatform(0) or perInterface(1) bit MUST be set. If the value of the mplsInterfaceConfIndex for this entry is zero, then only the perPlatform(0) bit MUST be set and the perInterface(1) bit is meaningless. If the perInterface(1) bit is set then the value of mplsInterfaceLabelMinIn, mplsInterfaceLabelMaxIn, mplsInterfaceLabelMinOut, and mplsInterfaceLabelMaxOut for this entry reflect the label ranges for this interface. If only the perPlatform(0) bit is set, then the value of mplsInterfaceLabelMinIn, mplsInterfaceLabelMaxIn, mplsInterfaceLabelMinOut, and mplsInterfaceLabelMaxOut for this entry must be identical to the instance of these objects with index 0." REFERENCE "Multiprotocol Label Switching, Rosen et al, draft-ietf-mpls- arch-06.txt, August 1999." ::= { mplsInterfaceConfEntry 10 } mplsInterfaceConfStorageType OBJECT-TYPE SYNTAX StorageType -- Rsyntax INTEGER { -- other(1), -- volatile(2), -- nonVolatile(3), -- permanent(4), -- readOnly(5) -- } ACCESS read-write STATUS mandatory DESCRIPTION "The storage type for this entry." ::= { mplsInterfaceConfEntry 11 } mplsInterfacePerfTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsInterfacePerfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table provides MPLS performance information on a per-interface basis." ::= { mplsLsrObjects 2 } mplsInterfacePerfEntry OBJECT-TYPE SYNTAX MplsInterfacePerfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in this table is created by the LSR for every interface capable of supporting MPLS. Its is an extension to the mplsInterfaceConfEntry table." INDEX { mplsInterfaceConfIndex } -- Augments mplsInterfaceConfEntry ::= { mplsInterfacePerfTable 1 } MplsInterfacePerfEntry ::= SEQUENCE { mplsInterfaceInLabelsUsed Gauge, mplsInterfaceInPackets Counter, mplsInterfaceInDiscards Counter, mplsInterfaceFailedLabelLookup Counter, mplsInterfaceOutLabelsUsed Gauge, mplsInterfaceOutPackets Counter, mplsInterfaceOutDiscards Counter, mplsInterfaceOutFragments Counter } mplsInterfaceInLabelsUsed OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the specific number of labels that are in use at this point in time on this interface in the incoming direction." ::= { mplsInterfacePerfEntry 1 } mplsInterfaceInPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This variable reflects the number of labeled packets that have been received on this interface." ::= { mplsInterfacePerfEntry 2 } mplsInterfaceInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of inbound labeled packets, which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a labeled packet could be to free up buffer space." ::= { mplsInterfacePerfEntry 3 } mplsInterfaceFailedLabelLookup OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the number of labeled packets that have been received on this interface and were discarded because there were no matching entries found for them in mplsInSegmentTable." ::= { mplsInterfacePerfEntry 4 } mplsInterfaceOutLabelsUsed OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of top-most labels in the outgoing label stacks that are in use at this point in time on this interface." ::= { mplsInterfacePerfEntry 5 } mplsInterfaceOutPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This variable contains the number of labeled packets that have been transmitted on this interface." ::= { mplsInterfacePerfEntry 6 } mplsInterfaceOutDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of outbound labeled packets, which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a labeled packet could be to free up buffer space." ::= { mplsInterfacePerfEntry 7 } mplsInterfaceOutFragments OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the number of outgoing MPLS packets that required fragmentation before transmission on this interface." ::= { mplsInterfacePerfEntry 8 } mplsInSegmentTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsInSegmentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains a collection of incoming segments to an LSR." ::= { mplsLsrObjects 3 } mplsInSegmentEntry OBJECT-TYPE SYNTAX MplsInSegmentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in this table represents one incoming segment. An entry can be created by a network administrator or an SNMP agent, or an MPLS signaling protocol. The creator of the entry is denoted by mplsInSegmentOwner. An entry in this table is indexed by the ifIndex of the incoming interface and the (top) label." INDEX { mplsInSegmentIfIndex, mplsInSegmentLabel } ::= { mplsInSegmentTable 1 } MplsInSegmentEntry ::= SEQUENCE { mplsInSegmentIfIndex InterfaceIndexOrZero, mplsInSegmentLabel MplsLabel, mplsInSegmentNPop INTEGER, mplsInSegmentAddrFamily AddressFamilyNumbers, mplsInSegmentXCIndex INTEGER, mplsInSegmentOwner MplsObjectOwner, mplsInSegmentTrafficParamPtr RowPointer, mplsInSegmentRowStatus RowStatus, mplsInSegmentStorageType StorageType, mplsInSegmentAdminStatus INTEGER, mplsInSegmentOperStatus INTEGER } mplsInSegmentIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero -- Rsyntax INTEGER(0..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a unique index for an entry in the MplsInSegmentTable. This value represents the interface index for the incoming MPLS interface. A value of zero represents an incoming label from the per-platform label space. In this case, the mplsInSegmentLabel is interpreted to be an MPLS-type label." ::= { mplsInSegmentEntry 1 } mplsInSegmentLabel OBJECT-TYPE SYNTAX MplsLabel -- Rsyntax Gauge(0..4294967295) ACCESS not-accessible STATUS mandatory DESCRIPTION "The incoming label for this segment." ::= { mplsInSegmentEntry 2 } mplsInSegmentNPop OBJECT-TYPE SYNTAX INTEGER(1..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The number of labels to pop from the incoming packet. Normally only the top label is popped from the packet and used for all switching decisions for that packet. Note that technologies which do not support label popping should set this value to its default value of 1." DEFVAL { 1 } ::= { mplsInSegmentEntry 3 } mplsInSegmentAddrFamily OBJECT-TYPE SYNTAX AddressFamilyNumbers -- Rsyntax INTEGER { -- ?? enum value of zero may cause problems -- other(0), -- ipV4(1), -- ipV6(2), -- nsap(3), -- hdlc(4), -- bbn1822(5), -- all802(6), -- e163(7), -- e164(8), -- f69(9), -- x121(10), -- ipx(11), -- appletalk(12), -- decnetIV(13), -- banyanVines(14), -- e164withNsap(15), -- dns(16), -- distinguishedname(17), -- asnumber(18), -- xtpoveripv4(19), -- xtpoveripv6(20), -- xtpnativemodextp(21), -- reserved(65535) -- } ACCESS read-write STATUS mandatory DESCRIPTION "The IANA address family [IANAFamily] of the incoming packet. A value of other(0) indicates that the family type is either unknown or undefined." DEFVAL { other } ::= { mplsInSegmentEntry 4 } mplsInSegmentXCIndex OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "Index into mplsXCTable which identifies which cross- connect entry this segment is part of. A value of zero indicates that this entry is not referred to by any cross-connect entry. When a cross-connect entry is created which this in-segment is a part of, this object is automatically updated to reflect the value of mplsXCIndex of that cross-connect entry." DEFVAL { 0 } ::= { mplsInSegmentEntry 5 } mplsInSegmentOwner OBJECT-TYPE SYNTAX MplsObjectOwner -- Rsyntax INTEGER { -- other(1), -- snmp(2), -- ldp(3), -- rsvp(4), -- policyAgent(5), -- unknown(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "Denotes the entity that created and is responsible for managing this segment." DEFVAL { unknown } ::= { mplsInSegmentEntry 6 } mplsInSegmentTrafficParamPtr OBJECT-TYPE SYNTAX RowPointer -- Rsyntax OBJECT IDENTIFIER ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents a pointer to the traffic parameter specification for this in-segment. This value may point at an entry in the mplsTrafficParamTable to indicate which mplsTrafficParamEntry is to be assigned to this segment. This value may optionally point at an externally defined traffic parameter specification table. A value of zero-dot-zero indicates best-effort treatment. By having the same value of this object, two or more segments can indicate resource sharing." ::= { mplsInSegmentEntry 7 } mplsInSegmentRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used to create, modify, and/or delete a row in this table." ::= { mplsInSegmentEntry 8 } mplsInSegmentStorageType OBJECT-TYPE SYNTAX StorageType -- Rsyntax INTEGER { -- other(1), -- volatile(2), -- nonVolatile(3), -- permanent(4), -- readOnly(5) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the storage type for this object." ::= { mplsInSegmentEntry 9 } mplsInSegmentAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This value is used to represent the manager’s desired operational status of this segment." ::= { mplsInSegmentEntry 10 } mplsInSegmentOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3), unknown(4), dormant(5), notPresent(6), lowerLayerDown(7) } ACCESS read-only STATUS mandatory DESCRIPTION "This value represents the actual operational status of this segment." ::= { mplsInSegmentEntry 11 } mplsInSegmentPerfTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsInSegmentPerfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains statistical information for incoming MPLS segments to an LSR." ::= { mplsLsrObjects 4 } mplsInSegmentPerfEntry OBJECT-TYPE SYNTAX MplsInSegmentPerfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in this table contains statistical information about one incoming segment which was configured in the mplsInSegmentTable. The counters in this entry should behave in a manner similar to that of the interface." INDEX { mplsInSegmentIfIndex, mplsInSegmentLabel } -- Augments mplsInSegmentEntry ::= { mplsInSegmentPerfTable 1 } MplsInSegmentPerfEntry ::= SEQUENCE { mplsInSegmentOctets Counter, mplsInSegmentPackets Counter, mplsInSegmentErrors Counter, mplsInSegmentDiscards Counter, mplsInSegmentHCOctets Counter, mplsInSegmentPerfDiscontinuityTime TimeStamp } mplsInSegmentOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This value represents the total number of octets received by this segment." ::= { mplsInSegmentPerfEntry 1 } mplsInSegmentPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of packets received by this segment." ::= { mplsInSegmentPerfEntry 2 } mplsInSegmentErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of errored packets received on this segment." ::= { mplsInSegmentPerfEntry 3 } mplsInSegmentDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of labeled packets received on this in- segment, which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a labeled packet could be to free up buffer space." ::= { mplsInSegmentPerfEntry 4 } mplsInSegmentHCOctets OBJECT-TYPE SYNTAX --?? syntax is not convertable to SMIv1 Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of octets received. This is the 64 bit version of mplsInSegmentOctets." ::= { mplsInSegmentPerfEntry 5 } mplsInSegmentPerfDiscontinuityTime OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime on the most recent occasion at which any one or more of this segment's Counter32 or Counter64 suffered a discontinuity. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value." ::= { mplsInSegmentPerfEntry 6 } mplsOutSegmentIndexNext OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the next appropriate value to be used for mplsOutSegmentIndex when creating entries in the mplsOutSegmentTable. If the number of unassigned entries is exhausted, this object will take on the value of 0. To obtain the mplsOutSegmentIndex value for a new entry, the manager must first issue a management protocol retrieval operation to obtain the current value of this object. The agent should modify the value to reflect the next unassigned index after each retrieval operation. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse." ::= { mplsLsrObjects 5 } mplsOutSegmentTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsOutSegmentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains a representation of the outgoing segments from an LSR." ::= { mplsLsrObjects 6 } mplsOutSegmentEntry OBJECT-TYPE SYNTAX MplsOutSegmentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in this table represents one outgoing segment. An entry can be created by a network administrator or an SNMP agent, or an MPLS signaling protocol. The object mplsOutSegmentOwner indicates the creator of this entry." INDEX { mplsOutSegmentIndex } ::= { mplsOutSegmentTable 1 } MplsOutSegmentEntry ::= SEQUENCE { mplsOutSegmentIndex INTEGER, mplsOutSegmentIfIndex InterfaceIndex, mplsOutSegmentPushTopLabel TruthValue, mplsOutSegmentTopLabel MplsLabel, mplsOutSegmentNextHopIpAddrType InetAddressType, mplsOutSegmentNextHopIpv4Addr InetAddressIPv4, mplsOutSegmentNextHopIpv6Addr InetAddressIPv6, mplsOutSegmentXCIndex INTEGER, mplsOutSegmentOwner MplsObjectOwner, mplsOutSegmentTrafficParamPtr RowPointer, mplsOutSegmentRowStatus RowStatus, mplsOutSegmentStorageType StorageType, mplsOutSegmentAdminStatus INTEGER, mplsOutSegmentOperStatus INTEGER } mplsOutSegmentIndex OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This value contains a unique index for this row. While a value of 0 is not valid as an index for this row it can be supplied as a valid value to index mplsXCTable to access entries for which no out- segment has been configured." ::= { mplsOutSegmentEntry 1 } mplsOutSegmentIfIndex OBJECT-TYPE SYNTAX InterfaceIndex -- Rsyntax INTEGER(1..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "This value contains the interface index of the outgoing interface." ::= { mplsOutSegmentEntry 2 } mplsOutSegmentPushTopLabel OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This value indicates whether or not a top label should be pushed onto the outgoing packet's label stack. The value of this variable must be set to true if the outgoing interface does not support pop- and-go (for example an ATM interface) or if it is a tunnel origination. Note that it is considered an error in the case that mplsOutSegmentPushTopLabel is set to false, but the cross-connect entry which refers to this out-segment has a non-zero mplsLabelStackIndex. The LSR MUST ensure that this situation does not happen " ::= { mplsOutSegmentEntry 3 } mplsOutSegmentTopLabel OBJECT-TYPE SYNTAX MplsLabel -- Rsyntax Gauge(0..4294967295) ACCESS read-write STATUS mandatory DESCRIPTION "If mplsOutSegmentPushTopLabel is true then this represents the label that should be pushed onto the top of the outgoing packet's label stack." ::= { mplsOutSegmentEntry 4 } mplsOutSegmentNextHopIpAddrType OBJECT-TYPE SYNTAX InetAddressType -- Rsyntax INTEGER { -- ?? enum value of zero may cause problems -- unknown(0), -- ipv4(1), -- ipv6(2), -- dns(16) -- } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the next hop address is IPv4 or IPv6. Note that a value of unknown (0) is valid only when the outgoing interface is of type point-to- point." -- DEFVAL { unknown } ::= { mplsOutSegmentEntry 5 } mplsOutSegmentNextHopIpv4Addr OBJECT-TYPE SYNTAX InetAddressIPv4 -- Rsyntax OCTET STRING(SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "IPv4 Address of the next hop. Its value is significant only when mplsOutSegmentNextHopIpAddrType is ipV4 (1), otherwise it should return a value of 0." ::= { mplsOutSegmentEntry 6 } mplsOutSegmentNextHopIpv6Addr OBJECT-TYPE SYNTAX InetAddressIPv6 -- Rsyntax OCTET STRING(SIZE(16|20)) ACCESS read-write STATUS mandatory DESCRIPTION "IPv6 address of the next hop. Its value is significant only when mplsOutSegmentNextHopIpAddrType is ipV6 (2), otherwise it should return a value of 0." ::= { mplsOutSegmentEntry 7 } mplsOutSegmentXCIndex OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "Index into mplsXCTable which identifies which cross- connect entry this segment is part of. A value of zero indicates that this entry is not referred to by any cross-connect entry. When a cross-connect entry is created which this out-segment is a part of, this object is automatically updated to reflect the value of mplsXCIndex of that cross-connect entry." DEFVAL { 0 } ::= { mplsOutSegmentEntry 8 } mplsOutSegmentOwner OBJECT-TYPE SYNTAX MplsObjectOwner -- Rsyntax INTEGER { -- other(1), -- snmp(2), -- ldp(3), -- rsvp(4), -- policyAgent(5), -- unknown(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "Denotes the entity which created and is responsible for managing this segment." DEFVAL { unknown } ::= { mplsOutSegmentEntry 9 } mplsOutSegmentTrafficParamPtr OBJECT-TYPE SYNTAX RowPointer -- Rsyntax OBJECT IDENTIFIER ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents a pointer to the traffic parameter specification for this out-segment. This value may point at an entry in the mplsTrafficParamTable to indicate which mplsTrafficParamEntry is to be assigned to this segment. This value may optionally point at an externally defined traffic parameter specification table. A value of zero-dot-zero indicates best- effort treatment. By having the same value of this object, two or more segments can indicate resource sharing." ::= { mplsOutSegmentEntry 10 } mplsOutSegmentRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "For creating, modifying, and deleting this row." ::= { mplsOutSegmentEntry 11 } mplsOutSegmentStorageType OBJECT-TYPE SYNTAX StorageType -- Rsyntax INTEGER { -- other(1), -- volatile(2), -- nonVolatile(3), -- permanent(4), -- readOnly(5) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the storage type for this object." ::= { mplsOutSegmentEntry 12 } mplsOutSegmentAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired operational status of this segment." ::= { mplsOutSegmentEntry 13 } mplsOutSegmentOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3), unknown(4), dormant(5), notPresent(6), lowerLayerDown(7) } ACCESS read-only STATUS mandatory DESCRIPTION "The actual operational status of this segment." ::= { mplsOutSegmentEntry 14 } mplsOutSegmentPerfTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsOutSegmentPerfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains statistical information about outgoing segments from an LSR. The counters in this entry should behave in a manner similar to that of the interface." ::= { mplsLsrObjects 7 } mplsOutSegmentPerfEntry OBJECT-TYPE SYNTAX MplsOutSegmentPerfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in this table contains statistical information about one outgoing segment configured in mplsOutSegmentTable." INDEX { mplsOutSegmentIndex } -- Augments mplsOutSegmentEntry ::= { mplsOutSegmentPerfTable 1 } MplsOutSegmentPerfEntry ::= SEQUENCE { mplsOutSegmentOctets Counter, mplsOutSegmentPackets Counter, mplsOutSegmentErrors Counter, mplsOutSegmentDiscards Counter, mplsOutSegmentHCOctets Counter, mplsOutSegmentPerfDiscontinuityTime TimeStamp } mplsOutSegmentOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This value contains the total number of octets sent on this segment." ::= { mplsOutSegmentPerfEntry 1 } mplsOutSegmentPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This value contains the total number of packets sent on this segment." ::= { mplsOutSegmentPerfEntry 2 } mplsOutSegmentErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of packets that could not be sent due to errors on this segment." ::= { mplsOutSegmentPerfEntry 3 } mplsOutSegmentDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of labeled packets received on this out- segment, which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a labeled packet could be to free up buffer space." ::= { mplsOutSegmentPerfEntry 4 } mplsOutSegmentHCOctets OBJECT-TYPE SYNTAX --?? syntax is not convertable to SMIv1 Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of octets sent. This is the 64 bit version of mplsOutSegmentOctets." ::= { mplsOutSegmentPerfEntry 5 } mplsOutSegmentPerfDiscontinuityTime OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime on the most recent occasion at which any one or more of this segment's Counter32 or Counter64 suffered a discontinuity. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value." ::= { mplsOutSegmentPerfEntry 6 } mplsXCIndexNext OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains an appropriate value to be used for mplsXCIndex when creating entries in the mplsXCTable. The value 0 indicates that no unassigned entries are available. To obtain the value of mplsXCIndex for a new entry in the mplsXCTable, the manager issues a management protocol retrieval operation to obtain the current value of mplsXCIndex. After each retrieval operation, the agent should modify the value to reflect the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse." ::= { mplsLsrObjects 8 } mplsXCTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsXCEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table specifies information for switching between LSP segments. It supports point-to-point, point-to-multipoint and multipoint-to-point connections. mplsLabelStackTable specifies the label stack information for a cross-connect LSR and is referred to from mplsXCTable." ::= { mplsLsrObjects 9 } mplsXCEntry OBJECT-TYPE SYNTAX MplsXCEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row in this table represents one cross-connect entry. The following objects index it: - cross-connect index mplsXCIndex that uniquely identifies a group of cross-connect entries - interface index of the in-segment, mplsInSegmentIfIndex - incoming label(s), mplsInSegmentLabel - out-segment index, mplsOutSegmentIndex Originating LSPs: These are represented by using the special combination of values mplsInSegmentIfIndex=0 and mplsInSegmentLabel=0 as indexes. In this case the mplsOutSegmentIndex MUST be non-zero. Terminating LSPs: These are represented by using the special value mplsOutSegmentIndex=0 as index. Special labels: Entries indexed by reserved MPLS label values 0 through 15 imply terminating LSPs and MUST have mplsOutSegmentIfIndex = 0. Note that situations where LSPs are terminated with incoming label equal to 0, should have mplsInSegmentIfIndex = 0 as well, but can be distinguished from originating LSPs because the mplsOutSegmentIfIndex = 0. The mplsOutSegmentIfIndex MUST only be set to 0 in cases of terminating LSPs. An entry can be created by a network administrator or by an SNMP agent as instructed by an MPLS signaling protocol." INDEX { mplsXCIndex, mplsInSegmentIfIndex, mplsInSegmentLabel, mplsOutSegmentIndex } ::= { mplsXCTable 1 } MplsXCEntry ::= SEQUENCE { mplsXCIndex INTEGER, mplsXCLspId MplsLSPID, mplsXCLabelStackIndex INTEGER, mplsXCIsPersistent TruthValue, mplsXCOwner MplsObjectOwner, mplsXCRowStatus RowStatus, mplsXCStorageType StorageType, mplsXCAdminStatus INTEGER, mplsXCOperStatus INTEGER } mplsXCIndex OBJECT-TYPE SYNTAX INTEGER(1..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "Primary index for the row identifying a group of cross-connect segments." ::= { mplsXCEntry 1 } mplsXCLspId OBJECT-TYPE SYNTAX MplsLSPID -- Rsyntax OCTET STRING(SIZE(0..31)) ACCESS read-write STATUS mandatory DESCRIPTION "This value identifies the label switched path that this cross-connect entry belongs to." ::= { mplsXCEntry 2 } mplsXCLabelStackIndex OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "Primary index into mplsLabelStackTable identifying a stack of labels to be pushed beneath the top label. Note that the top label identified by the out- segment ensures that all the components of a multipoint-to-point connection have the same outgoing label. A value of 0 indicates that no labels are to be stacked beneath the top label." ::= { mplsXCEntry 3 } mplsXCIsPersistent OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "Denotes whether or not this cross-connect entry and associated in- and out-segments should be restored automatically after failures. This value MUST be set to false in cases where this cross-connect entry was created by a signaling protocol." DEFVAL { false } ::= { mplsXCEntry 4 } mplsXCOwner OBJECT-TYPE SYNTAX MplsObjectOwner -- Rsyntax INTEGER { -- other(1), -- snmp(2), -- ldp(3), -- rsvp(4), -- policyAgent(5), -- unknown(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "Denotes the entity that created and is responsible for managing this cross-connect." ::= { mplsXCEntry 5 } mplsXCRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "For creating, modifying, and deleting this row." ::= { mplsXCEntry 6 } mplsXCStorageType OBJECT-TYPE SYNTAX StorageType -- Rsyntax INTEGER { -- other(1), -- volatile(2), -- nonVolatile(3), -- permanent(4), -- readOnly(5) -- } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the storage type for this object." ::= { mplsXCEntry 7 } mplsXCAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired operational status of this segment." ::= { mplsXCEntry 8 } mplsXCOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3), unknown(4), dormant(5), notPresent(6), lowerLayerDown(7) } ACCESS read-only STATUS mandatory DESCRIPTION "The actual operational status of this cross- connect." ::= { mplsXCEntry 9 } mplsMaxLabelStackDepth OBJECT-TYPE SYNTAX INTEGER(1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The maximum stack depth supported by this LSR." ::= { mplsLsrObjects 10 } mplsLabelStackIndexNext OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains an appropriate value to be used for mplsLabelStackIndex when creating entries in the mplsLabelStackTable. The value 0 indicates that no unassigned entries are available. To obtain an mplsLabelStackIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval operation, the agent should modify the value to reflect the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse." ::= { mplsLsrObjects 11 } mplsLabelStackTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsLabelStackEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table specifies the label stack to be pushed onto a packet, beneath the top label. Entries into this table are referred to from mplsXCTable." ::= { mplsLsrObjects 12 } mplsLabelStackEntry OBJECT-TYPE SYNTAX MplsLabelStackEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in this table represents one label which is to be pushed onto an outgoing packet, beneath the top label. An entry can be created by a network administrator or by an SNMP agent as instructed by an MPLS signaling protocol." INDEX { mplsLabelStackIndex, mplsLabelStackLabelIndex } ::= { mplsLabelStackTable 1 } MplsLabelStackEntry ::= SEQUENCE { mplsLabelStackIndex INTEGER, mplsLabelStackLabelIndex INTEGER, mplsLabelStackLabel MplsLabel, mplsLabelStackRowStatus RowStatus, mplsLabelStackStorageType StorageType } mplsLabelStackIndex OBJECT-TYPE SYNTAX INTEGER(1..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "Primary index for this row identifying a stack of labels to be pushed on an outgoing packet, beneath the top label." ::= { mplsLabelStackEntry 1 } mplsLabelStackLabelIndex OBJECT-TYPE SYNTAX INTEGER(1..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "Secondary index for this row identifying one label of the stack. Note that an entry with a smaller mplsLabelStackLabelIndex would refer to a label higher up the label stack and would be popped at a downstream LSR before a label represented by a higher mplsLabelStackLabelIndex at a downstream LSR." ::= { mplsLabelStackEntry 2 } mplsLabelStackLabel OBJECT-TYPE SYNTAX MplsLabel -- Rsyntax Gauge(0..4294967295) ACCESS read-write STATUS mandatory DESCRIPTION "The label to pushed." ::= { mplsLabelStackEntry 3 } mplsLabelStackRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "For creating, modifying, and deleting this row." ::= { mplsLabelStackEntry 4 } mplsLabelStackStorageType OBJECT-TYPE SYNTAX StorageType -- Rsyntax INTEGER { -- other(1), -- volatile(2), -- nonVolatile(3), -- permanent(4), -- readOnly(5) -- } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the storage type for this object." ::= { mplsLabelStackEntry 5 } mplsTrafficParamIndexNext OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains an appropriate value which will be used for mplsTrafficParamIndex when creating entries in the mplsTrafficParamTable. The value 0 indicates that no unassigned entries are available. To obtain the mplsTrafficParamIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval operation, the agent should modify the value to reflect the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse." ::= { mplsLsrObjects 13 } mplsTrafficParamTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTrafficParamEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table specifies the Traffic Parameter objects for in and out-segments." ::= { mplsLsrObjects 14 } mplsTrafficParamEntry OBJECT-TYPE SYNTAX MplsTrafficParamEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in this table represents the TrafficParam objects for one or more in or out segments. A single entry can be pointed to by multiple segments indicating resource sharing." INDEX { mplsTrafficParamIndex } ::= { mplsTrafficParamTable 1 } MplsTrafficParamEntry ::= SEQUENCE { mplsTrafficParamIndex INTEGER, mplsTrafficParamMaxRate MplsBitRate, mplsTrafficParamMeanRate MplsBitRate, mplsTrafficParamMaxBurstSize MplsBurstSize, mplsTrafficParamRowStatus RowStatus, mplsTrafficParamStorageType StorageType } mplsTrafficParamIndex OBJECT-TYPE SYNTAX INTEGER(1..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "Uniquely identifies this row of the table. Note that zero represents an invalid index." ::= { mplsTrafficParamEntry 1 } mplsTrafficParamMaxRate OBJECT-TYPE SYNTAX MplsBitRate -- Rsyntax INTEGER(1..2147483647) -- Units -- kilobits per second ACCESS read-write STATUS mandatory DESCRIPTION "Maximum rate in kilobits/second." ::= { mplsTrafficParamEntry 2 } mplsTrafficParamMeanRate OBJECT-TYPE SYNTAX MplsBitRate -- Rsyntax INTEGER(1..2147483647) -- Units -- kilobits per second ACCESS read-write STATUS mandatory DESCRIPTION "Mean rate in kilobits/second." ::= { mplsTrafficParamEntry 3 } mplsTrafficParamMaxBurstSize OBJECT-TYPE SYNTAX MplsBurstSize -- Rsyntax INTEGER(1..2147483647) -- Units -- bytes ACCESS read-write STATUS mandatory DESCRIPTION "Maximum burst size in bytes." ::= { mplsTrafficParamEntry 4 } mplsTrafficParamRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "For creating, modifying, and deleting this row." ::= { mplsTrafficParamEntry 5 } mplsTrafficParamStorageType OBJECT-TYPE SYNTAX StorageType -- Rsyntax INTEGER { -- other(1), -- volatile(2), -- nonVolatile(3), -- permanent(4), -- readOnly(5) -- } ACCESS read-write STATUS mandatory DESCRIPTION "The storage type for this object." ::= { mplsTrafficParamEntry 6 } mplsInSegmentTrapEnable OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "If this object is true, then it enables the generation of mplsInSegmentUp and mplsInSegmentDown traps, otherwise these traps are not emitted." DEFVAL { false } ::= { mplsLsrObjects 15 } mplsOutSegmentTrapEnable OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "If this object is true, then it enables the generation of mplsOutSegmentUp and mplsOutSegmentDown traps, otherwise these traps are not emitted." DEFVAL { false } ::= { mplsLsrObjects 16 } mplsXCTrapEnable OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "If this object is true, then it enables the generation of mplsXCUp and mplsXCDown traps, otherwise these traps are not emitted." DEFVAL { false } ::= { mplsLsrObjects 17 } mplsInSegmentUp TRAP-TYPE --?? Non-reverse mappable trap ENTERPRISE mplsLsrNotifications VARIABLES { mplsInSegmentIfIndex, mplsInSegmentLabel, mplsInSegmentAdminStatus, mplsInSegmentOperStatus } -- Status -- mandatory DESCRIPTION "This notification is generated when a mplsInSegmentOperStatus object for one of the configured in-segments is about to leave the down state and transition into some other state (but not into the notPresent state). This other state is indicated by the included value of mplsInSegmentOperStatus." ::= 1 mplsInSegmentDown TRAP-TYPE --?? Non-reverse mappable trap ENTERPRISE mplsLsrNotifications VARIABLES { mplsInSegmentIfIndex, mplsInSegmentLabel, mplsInSegmentAdminStatus, mplsInSegmentOperStatus } -- Status -- mandatory DESCRIPTION "This notification is generated when a mplsInSegmentOperStatus object for one of the configured in-segments is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of mplsInSegmentOperStatus." ::= 2 mplsOutSegmentUp TRAP-TYPE --?? Non-reverse mappable trap ENTERPRISE mplsLsrNotifications VARIABLES { mplsOutSegmentIndex, mplsInSegmentAdminStatus, mplsInSegmentOperStatus } -- Status -- mandatory DESCRIPTION "This notification is generated when a mplsOutSegmentOperStatus object for one of the configured out-segments is about to leave the down state and transition into some other state (but not into the notPresent state). This other state is indicated by the included value of mplsOutSegmentOperStatus." ::= 3 mplsOutSegmentDown TRAP-TYPE --?? Non-reverse mappable trap ENTERPRISE mplsLsrNotifications VARIABLES { mplsOutSegmentIndex, mplsInSegmentAdminStatus, mplsInSegmentOperStatus } -- Status -- mandatory DESCRIPTION "This notification is generated when a mplsOutSegmentOperStatus object for one of the configured out-segments is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of mplsOutSegmentOperStatus." ::= 4 mplsXCUp TRAP-TYPE --?? Non-reverse mappable trap ENTERPRISE mplsLsrNotifications VARIABLES { mplsXCIndex, mplsInSegmentIfIndex, mplsInSegmentLabel, mplsOutSegmentIndex, mplsXCAdminStatus, mplsXCOperStatus } -- Status -- mandatory DESCRIPTION "This notification is generated when a mplsXCOperStatus object for one of the configured cross-connect entries is about to leave the down state and transition into some other state (but not into the notPresent state). This other state is indicated by the included value of mplsXCOperStatus." ::= 5 mplsXCDown TRAP-TYPE --?? Non-reverse mappable trap ENTERPRISE mplsLsrNotifications VARIABLES { mplsXCIndex, mplsInSegmentIfIndex, mplsInSegmentLabel, mplsOutSegmentIndex, mplsXCAdminStatus, mplsXCOperStatus } -- Status -- mandatory DESCRIPTION "This notification is generated when a mplsXCOperStatus object for one of the configured cross-connect entries is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of mplsXCOperStatus." ::= 6 mplsInterfaceGroup OBJECT IDENTIFIER ::= { mplsLsrGroups 1 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- Collection of objects needed for MPLS interface -- configuration and performance information. -- objects -- mplsInterfaceLabelMinIn, mplsInterfaceLabelMaxIn, -- mplsInterfaceLabelMinOut, mplsInterfaceLabelMaxOut, -- mplsInterfaceTotalBandwidth, mplsInterfaceAvailableBandwidth, -- mplsInterfaceTotalBuffer, mplsInterfaceAvailableBuffer, -- mplsInterfaceLabelParticipationType, -- mplsInterfaceConfStorageType mplsInSegmentGroup OBJECT IDENTIFIER ::= { mplsLsrGroups 2 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- Collection of objects needed to implement an in- -- segment. -- objects -- mplsInSegmentNPop, mplsInSegmentAddrFamily, -- mplsInSegmentXCIndex, mplsInSegmentOctets, -- mplsInSegmentDiscards, mplsInSegmentOwner, -- mplsInSegmentAdminStatus, mplsInSegmentOperStatus, -- mplsInSegmentRowStatus, mplsInSegmentTrapEnable, -- mplsInSegmentStorageType, mplsInSegmentTrafficParamPtr mplsOutSegmentGroup OBJECT IDENTIFIER ::= { mplsLsrGroups 3 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- Collection of objects needed to implement an out- -- segment. -- objects -- mplsOutSegmentIndexNext, mplsOutSegmentIfIndex, -- mplsOutSegmentPushTopLabel, mplsOutSegmentTopLabel, -- mplsOutSegmentNextHopIpAddrType, -- mplsOutSegmentNextHopIpv4Addr, mplsOutSegmentNextHopIpv6Addr, -- mplsOutSegmentXCIndex, mplsOutSegmentOwner, -- mplsOutSegmentOctets, mplsOutSegmentDiscards, -- mplsOutSegmentErrors, mplsOutSegmentAdminStatus, -- mplsOutSegmentOperStatus, mplsOutSegmentRowStatus, -- mplsOutSegmentTrapEnable, mplsOutSegmentStorageType, -- mplsOutSegmentTrafficParamPtr mplsXCGroup OBJECT IDENTIFIER ::= { mplsLsrGroups 4 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- Collection of objects needed to implement a -- cross-connect entry. -- objects -- mplsXCIndexNext, mplsXCLspId, mplsXCLabelStackIndex, -- mplsXCOwner, mplsXCAdminStatus, mplsXCOperStatus, -- mplsXCRowStatus, mplsXCTrapEnable, mplsXCStorageType mplsPerfGroup OBJECT IDENTIFIER ::= { mplsLsrGroups 5 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- Collection of objects providing performance -- information -- about an LSR. -- objects -- mplsInSegmentOctets, mplsInSegmentPackets, -- mplsInSegmentErrors, mplsInSegmentDiscards, -- mplsOutSegmentOctets, mplsOutSegmentPackets, -- mplsOutSegmentDiscards, mplsInterfaceInLabelsUsed, -- mplsInterfaceInPackets, mplsInterfaceInDiscards, -- mplsInterfaceFailedLabelLookup, mplsInterfaceOutPackets, -- mplsInterfaceOutDiscards, mplsInterfaceOutFragments, -- mplsInterfaceOutLabelsUsed mplsHCInSegmentPerfGroup OBJECT IDENTIFIER ::= { mplsLsrGroups 6 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- Object(s) providing performance information -- specific to out-segments for which the object -- mplsInterfaceInOctets wraps around too quickly. -- objects -- mplsInSegmentHCOctets mplsHCOutSegmentPerfGroup OBJECT IDENTIFIER ::= { mplsLsrGroups 7 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- Object(s) providing performance information -- specific to out-segments for which the object -- mplsInterfaceOutOctets wraps around too -- quickly. -- objects -- mplsOutSegmentHCOctets mplsTrafficParamGroup OBJECT IDENTIFIER ::= { mplsLsrGroups 8 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- Object(s) required for supporting QoS resource -- reservation. -- objects -- mplsTrafficParamIndexNext, mplsTrafficParamMaxRate, -- mplsTrafficParamMeanRate, mplsTrafficParamMaxBurstSize, -- mplsTrafficParamRowStatus, mplsTrafficParamStorageType mplsXCIsPersistentGroup OBJECT IDENTIFIER ::= { mplsLsrGroups 9 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- Objects needed to support persistent cross- -- connects. -- objects -- mplsXCIsPersistent mplsXCIsNotPersistentGroup OBJECT IDENTIFIER ::= { mplsLsrGroups 10 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- Objects needed to support non-persistent cross- -- connects. -- objects -- mplsXCIsPersistent mplsLabelStackGroup OBJECT IDENTIFIER ::= { mplsLsrGroups 11 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- Objects needed to support label stacking. -- objects -- mplsLabelStackLabel, mplsLabelStackRowStatus, -- mplsLabelStackStorageType, mplsMaxLabelStackDepth, -- mplsLabelStackIndexNext mplsSegmentDiscontinuityGroup OBJECT IDENTIFIER ::= { mplsLsrGroups 12 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing information -- specific to segment discontinuities.. -- objects -- mplsInSegmentPerfDiscontinuityTime, -- mplsOutSegmentPerfDiscontinuityTime mplsLsrNotificationGroup OBJECT IDENTIFIER ::= { mplsLsrGroups 13 } -- NOTIFICATION-GROUP -- Status -- mandatory -- Descr -- Set of notifications implemented in this module. -- None is mandatory. -- notifications -- mplsInSegmentUp, mplsInSegmentDown, mplsOutSegmentUp, -- mplsOutSegmentDown, mplsXCUp, mplsXCDown mplsLsrModuleCompliance OBJECT IDENTIFIER ::= { mplsLsrCompliances 1 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- Compliance statement for agents that support the -- MPLS LSR MIB. -- Module -- >>current<< -- MandGroup -- mplsInSegmentGroup -- MandGroup -- mplsOutSegmentGroup -- MandGroup -- mplsXCGroup -- MandGroup -- mplsInterfaceGroup -- MandGroup -- mplsPerfGroup -- MandGroup -- mplsSegmentDiscontinuityGroup -- OptGroup -- mplsHCInSegmentPerfGroup -- OptGroup -- mplsHCOutSegmentPerfGroup -- OptGroup -- mplsTrafficParamGroup -- OptGroup -- mplsXCIsPersistentGroup -- OptGroup -- mplsXCIsNotPersistentGroup -- ObjVar -- mplsInterfaceConfStorageType -- ObjVar -- mplsInSegmentXCIndex -- ObjVar -- mplsInSegmentNPop -- ObjVar -- mplsInSegmentAddrFamily -- ObjVar -- mplsInSegmentAdminStatus -- ObjVar -- mplsInSegmentOperStatus -- ObjVar -- mplsInSegmentStorageType -- ObjVar -- mplsOutSegmentIfIndex -- ObjVar -- mplsOutSegmentPushTopLabel -- ObjVar -- mplsOutSegmentTopLabel -- ObjVar -- mplsOutSegmentNextHopIpAddrType -- ObjVar -- mplsOutSegmentNextHopIpv4Addr -- ObjVar -- mplsOutSegmentNextHopIpv6Addr -- ObjVar -- mplsOutSegmentAdminStatus -- ObjVar -- mplsOutSegmentOperStatus -- ObjVar -- mplsOutSegmentRowStatus -- ObjVar -- mplsOutSegmentStorageType -- ObjVar -- mplsXCLabelStackIndex -- ObjVar -- mplsXCIsPersistent -- ObjVar -- mplsXCAdminStatus -- ObjVar -- mplsXCOperStatus -- ObjVar -- mplsXCRowStatus -- ObjVar -- mplsXCStorageType END