-- MIB file created 06-May-2015 00:24:32, by -- SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com NTPv4-MIB DEFINITIONS ::= BEGIN -- From file: "NTPv4-MIB.my" -- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T" IMPORTS mib-2 FROM SNMPv2-SMI-v1 DisplayString FROM SNMPv2-TC-v1 InetAddressType, InetAddress FROM INET-ADDRESS-MIB Utf8String FROM SYSAPPL-MIB Counter, Gauge, TimeTicks FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215; ntpSnmpMIB OBJECT IDENTIFIER ::= { mib-2 197 } -- MODULE-IDENTITY -- LastUpdated -- 201005170000Z -- OrgName -- The IETF NTP Working Group (ntpwg) -- ContactInfo -- WG Email: ntpwg@lists.ntp.isc.org -- Subscribe: -- https://lists.ntp.isc.org/mailman/listinfo/ntpwg -- -- Heiko Gerstung -- Meinberg Funkuhren Gmbh & Co. KG -- Lange Wand 9 -- Bad Pyrmont 31812 -- Germany -- -- Phone: +49 5281 9309 25 -- Email: heiko.gerstung@meinberg.de -- -- Chris Elliott -- 1516 Kent St. -- Durham, NC 27707 -- USA -- -- Phone: +1-919-308-1216 -- Email: chelliot@pobox.com -- -- Brian Haberman -- 11100 Johns Hopkins Road -- Laurel, MD 20723 -- USA -- -- Phone: +1-443-778-1319 -- Email: brian@innovationslab.net -- Descr -- The Management Information Base for NTP time entities. -- -- Copyright (c) 2010 IETF Trust and the persons identified as -- authors of the code. All rights reserved. -- -- Redistribution and use in source and binary forms, with or -- without modification, is permitted pursuant to, and subject -- to the license terms contained in, the Simplified BSD License -- set forth in Section 4.c of the IETF Trust's Legal Provisions -- Relating to IETF Documents -- (http://trustee.ietf.org/license-info). -- RevDate -- 201005170000Z -- RevDescr -- This revision of the MIB module is published as RFC 5907. ntpSnmpMIBObjects OBJECT IDENTIFIER ::= { ntpSnmpMIB 1 } ntpEntInfo OBJECT IDENTIFIER ::= { ntpSnmpMIBObjects 1 } ntpEntStatus OBJECT IDENTIFIER ::= { ntpSnmpMIBObjects 2 } ntpAssociation OBJECT IDENTIFIER ::= { ntpSnmpMIBObjects 3 } ntpEntControl OBJECT IDENTIFIER ::= { ntpSnmpMIBObjects 4 } ntpEntNotifObjects OBJECT IDENTIFIER ::= { ntpSnmpMIBObjects 5 } ntpEntNotifications OBJECT IDENTIFIER ::= { ntpSnmpMIB 0 } ntpEntConformance OBJECT IDENTIFIER ::= { ntpSnmpMIB 2 } ntpEntCompliances OBJECT IDENTIFIER ::= { ntpEntConformance 1 } ntpEntGroups OBJECT IDENTIFIER ::= { ntpEntConformance 2 } NtpStratum ::= Gauge(1..16) -- TEXTUAL-CONVENTION -- DspHint -- d -- Status -- mandatory -- Descr -- The NTP stratum, with 16 representing no stratum. NtpDateTime ::= OCTET STRING(SIZE(0|16)) -- TEXTUAL-CONVENTION -- DspHint -- 4d:4d:4d.4d -- Status -- mandatory -- Descr -- NTP date/time on the device, in 128-bit -- NTP date format. If time is not syncronized, this -- field shall be a zero-length string. -- -- This trusted certificate (TC) is not to be used for objects -- that are used to set the time of the node querying this -- object. NTP should be used for this == or at least SNTP. -- Refer -- RFC 5905, section 6 ntpEntSoftwareName OBJECT-TYPE SYNTAX Utf8String -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The product name of the running NTP version, e.g., 'ntpd'." ::= { ntpEntInfo 1 } ntpEntSoftwareVersion OBJECT-TYPE SYNTAX Utf8String -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The software version of the installed NTP implementation as a full version string, e.g., 'ntpd-4.2.0b@1.1433 ...'" ::= { ntpEntInfo 2 } ntpEntSoftwareVendor OBJECT-TYPE SYNTAX Utf8String -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The vendor/author of the installed NTP version." ::= { ntpEntInfo 3 } ntpEntSystemType OBJECT-TYPE SYNTAX Utf8String -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "General hardware/os platform information, e.g., 'Linux 2.6.12 / x86'." ::= { ntpEntInfo 4 } ntpEntTimeResolution OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The time resolution in integer format, where the resolution is represented as divisions of a second, e.g., a value of 1000 translates to 1.0 ms." ::= { ntpEntInfo 5 } ntpEntTimePrecision OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The entity's precision in integer format, shows the precision. A value of -5 would mean 2^-5 = 31.25 ms." ::= { ntpEntInfo 6 } ntpEntTimeDistance OBJECT-TYPE SYNTAX DisplayString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The distance from this NTP entity to the root time reference (stratum 0) source including the unit, e.g., '13.243 ms'." ::= { ntpEntInfo 7 } ntpEntStatusCurrentMode OBJECT-TYPE SYNTAX INTEGER { notRunning(1), notSynchronized(2), noneConfigured(3), syncToLocal(4), syncToRefclock(5), syncToRemoteServer(6), unknown(99) } ACCESS read-only STATUS mandatory DESCRIPTION "The current mode of the NTP. The definition of each possible value is: notRunning(1) - NTP is not running. notSynchronized(2) - NTP is not synchronized to any time source (stratum = 16). noneConfigured(3) - NTP is not synchronized and does not have a reference configured (stratum = 16). syncToLocal(4) - NTP is distributing time based on its local clock (degraded accuracy and/or reliability). syncToRefclock(5) - NTP is synchronized to a local hardware refclock (e.g., GPS). syncToRemoteServer(6) - NTP is synchronized to a remote NTP server ('upstream' server). unknown(99) - The state of NTP is unknown." ::= { ntpEntStatus 1 } ntpEntStatusStratum OBJECT-TYPE SYNTAX NtpStratum -- Rsyntax Gauge(1..16) ACCESS read-only STATUS mandatory DESCRIPTION "The NTP entity's own stratum value. Should be a stratum of syspeer + 1 (or 16 if no syspeer)." ::= { ntpEntStatus 2 } ntpEntStatusActiveRefSourceId OBJECT-TYPE SYNTAX Gauge(0..99999) ACCESS read-only STATUS mandatory DESCRIPTION "The association ID of the current syspeer." ::= { ntpEntStatus 3 } ntpEntStatusActiveRefSourceName OBJECT-TYPE SYNTAX Utf8String -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The hostname/descriptive name of the current reference source selected as syspeer, e.g., 'ntp1.ptb.de' or 'GPS' or 'DCFi', ..." ::= { ntpEntStatus 4 } ntpEntStatusActiveOffset OBJECT-TYPE SYNTAX DisplayString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The time offset to the current selected reference time source as a string including unit, e.g., '0.032 ms' or '1.232 s'." ::= { ntpEntStatus 5 } ntpEntStatusNumberOfRefSources OBJECT-TYPE SYNTAX Gauge(0..99) ACCESS read-only STATUS mandatory DESCRIPTION "The number of reference sources configured for NTP." ::= { ntpEntStatus 6 } ntpEntStatusDispersion OBJECT-TYPE SYNTAX DisplayString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The root dispersion of the running NTP entity, e.g., '6.927'." ::= { ntpEntStatus 7 } ntpEntStatusEntityUptime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The uptime of the NTP entity, (i.e., the time since ntpd was (re-)initialized not sysUptime!). The time is represented in hundreds of seconds since Jan 1, 1970 (00:00:00.000) UTC." ::= { ntpEntStatus 8 } ntpEntStatusDateTime OBJECT-TYPE SYNTAX NtpDateTime -- Rsyntax OCTET STRING(SIZE(0|16)) ACCESS read-only STATUS mandatory DESCRIPTION "The current NTP date/time on the device, in 128-bit NTP date format. If time is not syncronized, this field shall be a zero-length string. This object can be used to timestamp events on this node and allow a management station to correlate different time objects. For example, a management station could query this object and sysUpTime in the same operation to be able to relate sysUpTime to NTP time. This object is not to be used to set the time of the node querying this object. NTP should be used for this -- or at least SNTP." REFERENCE "RFC 5905, section 6" ::= { ntpEntStatus 9 } ntpEntStatusLeapSecond OBJECT-TYPE SYNTAX NtpDateTime -- Rsyntax OCTET STRING(SIZE(0|16)) ACCESS read-only STATUS mandatory DESCRIPTION "Date the next known leap second will occur. If there is no leap second announced, then this object should be 0." ::= { ntpEntStatus 10 } ntpEntStatusLeapSecDirection OBJECT-TYPE SYNTAX INTEGER(-1..1) ACCESS read-only STATUS mandatory DESCRIPTION "Direction of next known leap second. If there is no leap second announced, then this object should be 0." ::= { ntpEntStatus 11 } ntpEntStatusInPkts OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "The total number of NTP messages delivered to the NTP entity from the transport service. Discountinuities in the value of this counter can occur upon cold start or reinitialization of the NTP entity, the management system and at other times as indicated by discontinuities in the value of sysUpTime." ::= { ntpEntStatus 12 } ntpEntStatusOutPkts OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "The total number of NTP messages delivered to the transport service by this NTP entity. Discountinuities in the value of this counter can occur upon cold start or reinitialization of the NTP entity, the management system and at other times as indicated by discontinuities in the value of sysUpTime." ::= { ntpEntStatus 13 } ntpEntStatusBadVersion OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "The total number of NTP messages that were delivered to this NTP entity and were for an unsupported NTP version. Discountinuities in the value of this counter can occur upon cold start or reinitialization of the NTP entity, the management system and at other times as indicated by discontinuities in the value of sysUpTime." ::= { ntpEntStatus 14 } ntpEntStatusProtocolError OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "The total number of NTP messages that were delivered to this NTP entity and this entity was not able to process due to an NTP protocol error. Discountinuities in the value of this counter can occur upon cold start or reinitialization of the NTP entity, the management system and at other times as indicated by discontinuities in the value of sysUpTime." ::= { ntpEntStatus 15 } ntpEntStatusNotifications OBJECT-TYPE SYNTAX Counter -- Units -- notifications ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP notifications that this NTP entity has generated. Discountinuities in the value of this counter can occur upon cold start or reinitialization of the NTP entity, the management system and at other times as indicated by discontinuities in the value of sysUpTime." ::= { ntpEntStatus 16 } ntpEntStatPktModeTable OBJECT-TYPE SYNTAX SEQUENCE OF NtpEntStatPktModeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The number of packets sent and received by packet mode. One entry per packet mode." ::= { ntpEntStatus 17 } ntpEntStatPktModeEntry OBJECT-TYPE SYNTAX NtpEntStatPktModeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A statistical record of the number of packets sent and received for each packet mode." INDEX { ntpEntStatPktMode } ::= { ntpEntStatPktModeTable 1 } NtpEntStatPktModeEntry ::= SEQUENCE { ntpEntStatPktMode INTEGER, ntpEntStatPktSent Counter, ntpEntStatPktReceived Counter } ntpEntStatPktMode OBJECT-TYPE SYNTAX INTEGER { symetricactive(1), symetricpassive(2), client(3), server(4), broadcastserver(5), broadcastclient(6) } ACCESS not-accessible STATUS mandatory DESCRIPTION "The NTP packet mode." ::= { ntpEntStatPktModeEntry 1 } ntpEntStatPktSent OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "The number of NTP packets sent with this packet mode. Discountinuities in the value of this counter can occur upon cold start or reinitialization of the NTP entity, the management system and at other times as indicated by discontinuities in the value of sysUpTime." ::= { ntpEntStatPktModeEntry 2 } ntpEntStatPktReceived OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "The number of NTP packets received with this packet mode. Discountinuities in the value of this counter can occur upon cold start or reinitialization of the NTP entity, the management system and at other times as indicated by discontinuities in the value of sysUpTime." ::= { ntpEntStatPktModeEntry 3 } ntpAssociationTable OBJECT-TYPE SYNTAX SEQUENCE OF NtpAssociationEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of currently mobilized associations." ::= { ntpAssociation 1 } ntpAssociationEntry OBJECT-TYPE SYNTAX NtpAssociationEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table entry of currently mobilized associations." INDEX { ntpAssocId } ::= { ntpAssociationTable 1 } NtpAssociationEntry ::= SEQUENCE { ntpAssocId Gauge, ntpAssocName Utf8String, ntpAssocRefId DisplayString, ntpAssocAddressType InetAddressType, ntpAssocAddress InetAddress, ntpAssocOffset DisplayString, ntpAssocStratum NtpStratum, ntpAssocStatusJitter DisplayString, ntpAssocStatusDelay DisplayString, ntpAssocStatusDispersion DisplayString } ntpAssocId OBJECT-TYPE SYNTAX Gauge(1..99999) ACCESS not-accessible STATUS mandatory DESCRIPTION "The association ID. This is an internal, unique ID." ::= { ntpAssociationEntry 1 } ntpAssocName OBJECT-TYPE SYNTAX Utf8String -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The hostname or other descriptive name for the association." ::= { ntpAssociationEntry 2 } ntpAssocRefId OBJECT-TYPE SYNTAX DisplayString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The refclock driver ID, if available." ::= { ntpAssociationEntry 3 } ntpAssocAddressType OBJECT-TYPE SYNTAX InetAddressType -- Rsyntax INTEGER { -- ?? enum value of zero may cause problems -- unknown(0), -- ipv4(1), -- ipv6(2), -- ipv4z(3), -- ipv6z(4), -- dns(16) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The type of address of the association. Can be either IPv4 or IPv6 (both with or without zone index) and contains the type of address for unicast, multicast, and broadcast associations." ::= { ntpAssociationEntry 4 } ntpAssocAddress OBJECT-TYPE SYNTAX InetAddress(SIZE(4|8|16|20)) -- Rsyntax OCTET STRING(SIZE(4|8|16|20)) ACCESS read-only STATUS mandatory DESCRIPTION "The IP address (IPv4 or IPv6, with or without zone index) of the association. The type and size depends on the ntpAssocAddressType object. Represents the IP address of a uni/multi/broadcast association." ::= { ntpAssociationEntry 5 } ntpAssocOffset OBJECT-TYPE SYNTAX DisplayString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The time offset to the association as a string." ::= { ntpAssociationEntry 6 } ntpAssocStratum OBJECT-TYPE SYNTAX NtpStratum -- Rsyntax Gauge(1..16) ACCESS read-only STATUS mandatory DESCRIPTION "The association stratum value." ::= { ntpAssociationEntry 7 } ntpAssocStatusJitter OBJECT-TYPE SYNTAX DisplayString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The jitter in milliseconds as a string." ::= { ntpAssociationEntry 8 } ntpAssocStatusDelay OBJECT-TYPE SYNTAX DisplayString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The network delay in milliseconds as a string." ::= { ntpAssociationEntry 9 } ntpAssocStatusDispersion OBJECT-TYPE SYNTAX DisplayString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The root dispersion of the association." ::= { ntpAssociationEntry 10 } ntpAssociationStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF NtpAssociationStatisticsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of statistics for current associations." ::= { ntpAssociation 2 } ntpAssociationStatisticsEntry OBJECT-TYPE SYNTAX NtpAssociationStatisticsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table entry of statistics for current associations." INDEX { ntpAssocId } ::= { ntpAssociationStatisticsTable 1 } NtpAssociationStatisticsEntry ::= SEQUENCE { ntpAssocStatInPkts Counter, ntpAssocStatOutPkts Counter, ntpAssocStatProtocolError Counter } ntpAssocStatInPkts OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "The total number of NTP messages delivered to the NTP entity from this association. Discountinuities in the value of this counter can occur upon cold start or reinitialization of the NTP entity, the management system and at other times as indicated by discontinuities in the value of sysUpTime." ::= { ntpAssociationStatisticsEntry 1 } ntpAssocStatOutPkts OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "The total number of NTP messages delivered to the transport service by this NTP entity for this association. Discountinuities in the value of this counter can occur upon cold start or reinitialization of the NTP entity, the management system and at other times as indicated by discontinuities in the value of sysUpTime." ::= { ntpAssociationStatisticsEntry 2 } ntpAssocStatProtocolError OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "The total number of NTP messages that were delivered to this NTP entity from this association and this entity was not able to process due to an NTP protocol error. Discountinuities in the value of this counter can occur upon cold start or reinitialization of the NTP entity, the management system and at other times as indicated by discontinuities in the value of sysUpTime." ::= { ntpAssociationStatisticsEntry 3 } ntpEntHeartbeatInterval OBJECT-TYPE SYNTAX Gauge -- Units -- seconds ACCESS read-write STATUS mandatory DESCRIPTION "The interval at which the ntpEntNotifHeartbeat notification should be sent, in seconds. If set to 0 and the entNotifHeartbeat bit in ntpEntNotifBits is 1, then ntpEntNotifHeartbeat is sent once. This value is stored persistently and will be restored to its last set value upon cold start or restart." DEFVAL { 60 } ::= { ntpEntControl 1 } ntpEntNotifBits OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..2)) -- BITS are: -- notUsed(0) -- entNotifModeChange(1) -- entNotifStratumChange(2) -- entNotifSyspeerChanged(3) -- entNotifAddAssociation(4) -- entNotifRemoveAssociation(5) -- entNotifConfigChanged(6) -- entNotifLeapSecondAnnounced(7) -- entNotifHeartbeat(8) ACCESS read-write STATUS mandatory DESCRIPTION "A bit for each notification. A 1 for a particular bit enables that particular notification, a 0 disables it. This value is stored persistently and will be restored to its last set value upon cold start or restart." ::= { ntpEntControl 2 } ntpEntNotifMessage OBJECT-TYPE SYNTAX Utf8String -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS not-accessible STATUS mandatory DESCRIPTION "Used as a payload object for all notifications. Holds a cleartext event message." DEFVAL { "no event" } ::= { ntpEntNotifObjects 1 } ntpEntNotifModeChange TRAP-TYPE -- Reverse mappable trap ENTERPRISE ntpSnmpMIB VARIABLES { ntpEntStatusCurrentMode } -- Status -- mandatory DESCRIPTION "The notification to be sent when the NTP entity changes mode, including starting and stopping (if possible)." ::= 1 ntpEntNotifStratumChange TRAP-TYPE -- Reverse mappable trap ENTERPRISE ntpSnmpMIB VARIABLES { ntpEntStatusDateTime, ntpEntStatusStratum, ntpEntNotifMessage } -- Status -- mandatory DESCRIPTION "The notification to be sent when stratum level of NTP changes." ::= 2 ntpEntNotifSyspeerChanged TRAP-TYPE -- Reverse mappable trap ENTERPRISE ntpSnmpMIB VARIABLES { ntpEntStatusDateTime, ntpEntStatusActiveRefSourceId, ntpEntNotifMessage } -- Status -- mandatory DESCRIPTION "The notification to be sent when a (new) syspeer has been selected." ::= 3 ntpEntNotifAddAssociation TRAP-TYPE -- Reverse mappable trap ENTERPRISE ntpSnmpMIB VARIABLES { ntpEntStatusDateTime, ntpAssocName, ntpEntNotifMessage } -- Status -- mandatory DESCRIPTION "The notification to be sent when a new association is mobilized." ::= 4 ntpEntNotifRemoveAssociation TRAP-TYPE -- Reverse mappable trap ENTERPRISE ntpSnmpMIB VARIABLES { ntpEntStatusDateTime, ntpAssocName, ntpEntNotifMessage } -- Status -- mandatory DESCRIPTION "The notification to be sent when an association is demobilized." ::= 5 ntpEntNotifConfigChanged TRAP-TYPE -- Reverse mappable trap ENTERPRISE ntpSnmpMIB VARIABLES { ntpEntStatusDateTime, ntpEntNotifMessage } -- Status -- mandatory DESCRIPTION "The notification to be sent when the NTP configuration has changed, e.g., when the system connected to the Internet and was assigned a new IP address by the ISPs DHCP server." ::= 6 ntpEntNotifLeapSecondAnnounced TRAP-TYPE -- Reverse mappable trap ENTERPRISE ntpSnmpMIB VARIABLES { ntpEntStatusDateTime, ntpEntNotifMessage } -- Status -- mandatory DESCRIPTION "The notification to be sent when a leap second has been announced." ::= 7 ntpEntNotifHeartbeat TRAP-TYPE -- Reverse mappable trap ENTERPRISE ntpSnmpMIB VARIABLES { ntpEntStatusDateTime, ntpEntStatusCurrentMode, ntpEntHeartbeatInterval, ntpEntNotifMessage } -- Status -- mandatory DESCRIPTION "The notification to be sent periodically (as defined by ntpEntHeartbeatInterval) to indicate that the NTP entity is still alive." ::= 8 ntpEntObjectsGroup1 OBJECT IDENTIFIER ::= { ntpEntGroups 1 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects for the NTP MIB. -- objects -- ntpEntSoftwareName, ntpEntSoftwareVersion, -- ntpEntSoftwareVendor, ntpEntSystemType, -- ntpEntStatusEntityUptime, ntpEntStatusDateTime, ntpAssocName, -- ntpAssocRefId, ntpAssocAddressType, ntpAssocAddress ntpEntObjectsGroup2 OBJECT IDENTIFIER ::= { ntpEntGroups 2 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects for the NTP MIB. -- objects -- ntpEntTimeResolution, ntpEntTimePrecision, ntpEntTimeDistance, -- ntpEntStatusCurrentMode, ntpEntStatusStratum, -- ntpEntStatusActiveRefSourceId, -- ntpEntStatusActiveRefSourceName, ntpEntStatusActiveOffset, -- ntpEntStatusNumberOfRefSources, ntpEntStatusDispersion, -- ntpEntStatusLeapSecond, ntpEntStatusLeapSecDirection, -- ntpEntStatusInPkts, ntpEntStatusOutPkts, -- ntpEntStatusBadVersion, ntpEntStatusProtocolError, -- ntpEntStatusNotifications, ntpEntStatPktSent, -- ntpEntStatPktReceived, ntpAssocOffset, ntpAssocStratum, -- ntpAssocStatusJitter, ntpAssocStatusDelay, -- ntpAssocStatusDispersion, ntpAssocStatInPkts, -- ntpAssocStatOutPkts, ntpAssocStatProtocolError, -- ntpEntHeartbeatInterval, ntpEntNotifBits, ntpEntNotifMessage ntpEntNotifGroup OBJECT IDENTIFIER ::= { ntpEntGroups 3 } -- NOTIFICATION-GROUP -- Status -- mandatory -- Descr -- A collection of notifications for the NTP MIB -- notifications -- ntpEntNotifModeChange, ntpEntNotifStratumChange, -- ntpEntNotifSyspeerChanged, ntpEntNotifAddAssociation, -- ntpEntNotifRemoveAssociation, ntpEntNotifConfigChanged, -- ntpEntNotifLeapSecondAnnounced, ntpEntNotifHeartbeat ntpEntNTPCompliance OBJECT IDENTIFIER ::= { ntpEntCompliances 1 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- The compliance statement for SNMP entities that use NTP and -- implement the NTP MIB. -- Module -- >>current<< -- MandGroup -- ntpEntObjectsGroup1 ntpEntSNTPCompliance OBJECT IDENTIFIER ::= { ntpEntCompliances 2 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- The compliance statement for SNMP entities that use SNTP and -- implement the NTP MIB. -- Module -- >>current<< -- MandGroup -- ntpEntObjectsGroup1 -- OptGroup -- ntpEntObjectsGroup2 -- OptGroup -- ntpEntNotifGroup END