-- MIB file created 27-Nov-2006 12:14:49, by
--   SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com

PCUBE-SE-MIB DEFINITIONS ::= BEGIN

-- From file: "PCUBE-SE-MIB.my"
-- Compile options "4 7 F H N O W 03 06 0B 0G 0N 0T"

IMPORTS
    pcubeWorkgroup, pcubeModules
            FROM PCUBE-SMI
    RowStatus
            FROM SNMPv2-TC-v1
    SnmpAdminString
            FROM SNMP-FRAMEWORK-MIB
    Counter, Gauge, IpAddress, TimeTicks
            FROM RFC1155-SMI
    OBJECT-TYPE
            FROM RFC-1212
    TRAP-TYPE
            FROM RFC-1215;

pcubeSeMIB OBJECT IDENTIFIER ::= { pcubeModules 3 }
-- MODULE-IDENTITY
--  LastUpdated
--    200611070000Z
--  OrgName
--    Cisco Systems, Inc.
--  ContactInfo
--    Cisco Systems
--     Customer Service
--    
--    Postal: 170 W Tasman Drive
--      San Jose, CA  95134
--      USA
--    
--    Tel: +1 800 553-NETS
--    
--    E-mail: cs-sce@cisco.com
--  Descr
--    Main SNMP MIB for Cisco's SCE OS products such as
--    SCE2000 and SE100. This MIB provides configuration and 
--    runtime status for chassis, control modules, and line 
--    modules on the SCOS systems.
--  RevDate
--    200611070000Z
--  RevDescr
--    - Increased the supported range of global 
--       controllers (globalControllersIndex) 
--       from (1..255) to (1..2147483647)
--     - Improved counter descriptions to reflect the counted 
--       layer for the following byte and bandwidth counters:
--       txQueuesBandwidth
--       txQueuesDroppedBytes
--       globalControllersBandwidth
--       globalControllersDroppedBytes
--  RevDate
--    200605100000Z
--  RevDescr
--    MIB revised as a part of integration into
--    Cisco SNMP MIB standard, 
--    main changes:
--    changed contaces,
--    added OBJECT-GROUPs,
--    added MODULE-COMPLIANCE,
--    renamed with a prefix 'p' the following
--    tables/objects to avoid conflict with 
--    existing Cisco MIbs:
--    moduleGrp,
--    moduleTable,
--    moduleIndex,                             
--    moduleType,                              
--    moduleNumTrafficProcessors,              
--    moduleSlotNum,                           
--    moduleHwVersion,                         
--    moduleNumPorts,                          
--    moduleNumLinks,                          
--    moduleConnectionMode,                    
--    moduleSerialNumber,                      
--    moduleUpStreamAttackFilteringTime,       
--    moduleUpStreamLastAttackFilteringTime,   
--    moduleDownStreamAttackFilteringTime,     
--    moduleDownStreamLastAttackFilteringTime, 
--    moduleAttackObjectsClearTime ,           
--    moduleAdminStatus,                       
--    moduleOperStatus,
--    chassisGrp
--    chassisSysType,
--    chassisPowerSupplyAlarm,
--    chassisFansAlarm, 
--    chassisTempAlarm,
--    chassisVoltageAlarm,
--    chassisNumSlots,
--    chassisSlotConfig,
--    chassisPsuType,
--    chassisLineFeedAlarm,
--    portGrp,
--    portTable,
--    portModuleIndex,
--    portIndex,
--    portType,      
--    portNumTxQueues,
--    portIfIndex, 
--    portAdminSpeed,
--    portAdminDuplex, 
--    portOperDuplex,
--    portLinkIndex, 
--    portOperStatus  
--    removed attackTypeTableClearTime counter, 
--    renamed Pcube to Cisco and SE to SCE.
--  RevDate
--    200602120000Z
--  RevDescr
--    Updates of OS version 3.0.3:
--     added mplsVpnAutoLearning group containing 
--     mplsVpnSoftwareCountersTable and added 
--     mplsVpnTotalHWMappingsThresholdExceededTrap.
--  RevDate
--    200508160000Z
--  RevDescr
--    Updates of OS version 3.0.0:
--    added vas group containing vasServerTable and added
--    vasServerOpertionalStatusChangeTrap.
--  RevDate
--    200412120000Z
--  RevDescr
--    Updates of OS version 2.5.5:
--    added rdrFormatterCategoryNumReportsQueued to the 
--    rdrFormatterCategoryTable in the RDR-formatter group,
--    added subscribersNumAnonymous and 
--    subscribersNumWithSessions to subscriber info,Added
--    the group attackGrp, containing attackTypeTable.
--  RevDate
--    200407010000Z
--  RevDescr
--    Updates of OS version 2.5:
--    added tpServiceLoss to traffic processor group,
--    added droppedBytes to Tx-Queue and global controller,
--    added TpIpRanges to subscriber info,deprecated 
--    telnetSession* traps, replaced by session* traps.
--  RevDate
--    200307020000Z
--  RevDescr
--    Updates of OS version 1.5:
--    added entries to the tpTable, 
--    added entries to the rdrFormatterGrp and
--    rdrFormatterDestTable,added entries to the portTable and
--    attack filter traps.
--  RevDate
--    200301050000Z
--  RevDescr
--    OS version 1.5 updates.

pcubeSEObjs     OBJECT IDENTIFIER ::= { pcubeWorkgroup 1 }
pcubeSeConformance OBJECT IDENTIFIER ::= { pcubeSeMIB 1 }
pcubeSeGroups   OBJECT IDENTIFIER ::= { pcubeSeConformance 1 }
pcubeSeCompliances OBJECT IDENTIFIER ::= { pcubeSeConformance 2 }
systemGrp       OBJECT IDENTIFIER ::= { pcubeSEObjs 1 }
pchassisGrp     OBJECT IDENTIFIER ::= { pcubeSEObjs 2 }
pmoduleGrp      OBJECT IDENTIFIER ::= { pcubeSEObjs 3 }
linkGrp         OBJECT IDENTIFIER ::= { pcubeSEObjs 4 }
diskGrp         OBJECT IDENTIFIER ::= { pcubeSEObjs 5 }
rdrFormatterGrp OBJECT IDENTIFIER ::= { pcubeSEObjs 6 }
loggerGrp       OBJECT IDENTIFIER ::= { pcubeSEObjs 7 }
subscribersGrp  OBJECT IDENTIFIER ::= { pcubeSEObjs 8 }
trafficProcessorGrp OBJECT IDENTIFIER ::= { pcubeSEObjs 9 }
pportGrp        OBJECT IDENTIFIER ::= { pcubeSEObjs 10 }
txQueuesGrp     OBJECT IDENTIFIER ::= { pcubeSEObjs 11 }
globalControllersGrp OBJECT IDENTIFIER ::= { pcubeSEObjs 12 }
applicationGrp  OBJECT IDENTIFIER ::= { pcubeSEObjs 13 }
trafficCountersGrp OBJECT IDENTIFIER ::= { pcubeSEObjs 14 }
attackGrp       OBJECT IDENTIFIER ::= { pcubeSEObjs 15 }
vasTrafficForwardingGrp OBJECT IDENTIFIER ::= { pcubeSEObjs 16 }
mplsVpnAutoLearnGrp OBJECT IDENTIFIER ::= { pcubeSEObjs 17 }
pcubeSeEvents   OBJECT IDENTIFIER ::= { pcubeWorkgroup 0 }

LinkModeType ::= INTEGER {
        other(1),
        bypass(2),
        forwarding(3),
        cutoff(4),
        sniffing(5)
        }
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    The various modes of a link.

sysOperationalStatus OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),
        boot(2),
        operational(3),
        warning(4),
        failure(5)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the operational status of the system."
    ::= { systemGrp 1 }

sysFailureRecovery OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),
        operational(2),
        nonOperational(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates if the system should enter a Failure mode
        after abnormal boot."
    ::= { systemGrp 2 }

sysVersion OBJECT-TYPE
    SYNTAX SnmpAdminString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The system version."
    ::= { systemGrp 3 }

pchassisSysType OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),
        sce1000(2),
        se100(3),
        sce2000(4)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The chassis system type."
    ::= { pchassisGrp 1 }

pchassisPowerSupplyAlarm OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),
        off(2),
        on(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates if the power supply to the chassis is normal.
        If the status is not 'ok' it means that one or more 
        power supplies are not functional."
    ::= { pchassisGrp 2 }

pchassisFansAlarm OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),
        off(2),
        on(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates if all the fans on the chassis are 
        functional."
    ::= { pchassisGrp 3 }

pchassisTempAlarm OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),
        off(2),
        on(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The chassis temperature alarm status."
    ::= { pchassisGrp 4 }

pchassisVoltageAlarm OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),
        off(2),
        on(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The chassis internal voltage alarm status.
        If the alarm is 'on' it indicates that the 
        voltage level of one or more HW units is not
        in the normal range."
    ::= { pchassisGrp 5 }

pchassisNumSlots OBJECT-TYPE
    SYNTAX INTEGER(0..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the number of slots in the chassis
        available for plug-in modules. This number 
        counts slots that are already occupied as well
        as empty slots."
    ::= { pchassisGrp 6 }

pchassisSlotConfig OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "An indication of which slots in the chassis have
        modules inserted. This is an integer value with 
        bits set to indicate configured modules.  
        It can be interpreted as a sum of f(x) as x goes
        from 1 to the number of slots, where f(x) = 0
        for no module inserted and f(x) = exp(2, x-1) for
        a module inserted."
    ::= { pchassisGrp 7 }

pchassisPsuType OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),
        ac(2),
        dc(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the type of the power supplies."
    ::= { pchassisGrp 8 }

pchassisLineFeedAlarm OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),
        off(2),
        on(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates if the line feed to the chassis is normal. 
        If the status is not 'ok' it means that one or more
        line feeds are not connected or have no power."
    ::= { pchassisGrp 10 }

pmoduleTable OBJECT-TYPE
    SYNTAX SEQUENCE OF PmoduleEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A list of module entries.  The number of entries is 
        the number of modules in the chassis."
    ::= { pmoduleGrp 1 }

pmoduleEntry OBJECT-TYPE
    SYNTAX PmoduleEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Entry containing information about one module in the 
        chassis."
    INDEX { pmoduleIndex }
    ::= { pmoduleTable 1 }

PmoduleEntry ::= SEQUENCE {
    pmoduleIndex INTEGER,
    pmoduleType INTEGER,
    pmoduleNumTrafficProcessors INTEGER,
    pmoduleSlotNum INTEGER,
    pmoduleHwVersion SnmpAdminString,
    pmoduleNumPorts INTEGER,
    pmoduleNumLinks INTEGER,
    pmoduleConnectionMode INTEGER,
    pmoduleSerialNumber SnmpAdminString,
    pmoduleUpStreamAttackFilteringTime TimeTicks,
    pmoduleUpStreamLastAttackFilteringTime TimeTicks,
    pmoduleDownStreamAttackFilteringTime TimeTicks,
    pmoduleDownStreamLastAttackFilteringTime TimeTicks,
    pmoduleAttackObjectsClearTime TimeTicks,
    pmoduleAdminStatus INTEGER,
    pmoduleOperStatus INTEGER
    }

pmoduleIndex OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "A unique value for each module within the chassis."
    ::= { pmoduleEntry 1 }

pmoduleType OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),
        gbe2Module(2),
        fe2Module(3),
        gbe4Module(4),
        fe4Module(5),
        oc124Module(6),
        fe8Module(7)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The type of module."
    ::= { pmoduleEntry 2 }

pmoduleNumTrafficProcessors OBJECT-TYPE
    SYNTAX INTEGER(0..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of traffic processors supported by this
        module."
    ::= { pmoduleEntry 3 }

pmoduleSlotNum OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This value is determined by the chassis slot number
        where this module is located.  Valid entries are 1 
        to the value of chassisNumSlots."
    ::= { pmoduleEntry 4 }

pmoduleHwVersion OBJECT-TYPE
    SYNTAX SnmpAdminString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The hardware version of the module."
    ::= { pmoduleEntry 5 }

pmoduleNumPorts OBJECT-TYPE
    SYNTAX INTEGER(0..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of ports supported by this module."
    ::= { pmoduleEntry 6 }

pmoduleNumLinks OBJECT-TYPE
    SYNTAX INTEGER(0..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of links carrying inband traffic that are
        supported by this module. Link is uniquely defined 
        by the two ports that are at its end-points."
    ::= { pmoduleEntry 7 }

pmoduleConnectionMode OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),
        inline(2),
        receiveOnly(3),
        inlineCascade(4),
        receiveOnlyCascade(5)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the connection mode of a module."
    ::= { pmoduleEntry 8 }

pmoduleSerialNumber OBJECT-TYPE
    SYNTAX SnmpAdminString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the serial number of the module."
    ::= { pmoduleEntry 9 }

pmoduleUpStreamAttackFilteringTime OBJECT-TYPE
    SYNTAX TimeTicks
--  Units
--    milliseconds
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the accumulated time which
        attack up-stream traffic was filtered."
    ::= { pmoduleEntry 10 }

pmoduleUpStreamLastAttackFilteringTime OBJECT-TYPE
    SYNTAX TimeTicks
--  Units
--    milliseconds
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the time since
        the previous attack was filtered 
        in the up-stream traffic."
    ::= { pmoduleEntry 11 }

pmoduleDownStreamAttackFilteringTime OBJECT-TYPE
    SYNTAX TimeTicks
--  Units
--    milliseconds
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the accumulated time 
        which attack down-stream 
        traffic was filtered."
    ::= { pmoduleEntry 12 }

pmoduleDownStreamLastAttackFilteringTime OBJECT-TYPE
    SYNTAX TimeTicks
--  Units
--    milliseconds
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the time  since 
        the previous attack was filtered 
        in the down-stream traffic."
    ::= { pmoduleEntry 13 }

pmoduleAttackObjectsClearTime OBJECT-TYPE
    SYNTAX TimeTicks
--  Units
--    milliseconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Indicates the time since
         the attack objects were cleared. Writing a 0 to this 
         object causes the counters to be cleared."
    ::= { pmoduleEntry 14 }

pmoduleAdminStatus OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),
        primary(2),
        secondary(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates configuration of a module in respect 
        to whether the module should handle traffic."
    ::= { pmoduleEntry 15 }

pmoduleOperStatus OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),
        active(2),
        standby(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates current module's role in respect to 
        whether the module handles traffic."
    ::= { pmoduleEntry 16 }

linkTable OBJECT-TYPE
    SYNTAX SEQUENCE OF LinkEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The Link table provides information regarding the
        configuration and status of the links 
        that pass through the SE and carry inband traffic.
        The number of entries in this table is 
        determined by the number of modules in 
        the chassis and the number of links 
        on each module."
    ::= { linkGrp 1 }

linkEntry OBJECT-TYPE
    SYNTAX LinkEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Entry containing information about the Link."
    INDEX { linkModuleIndex, linkIndex }
    ::= { linkTable 1 }

LinkEntry ::= SEQUENCE {
    linkModuleIndex INTEGER,
    linkIndex INTEGER,
    linkAdminModeOnActive LinkModeType,
    linkAdminModeOnFailure LinkModeType,
    linkOperMode LinkModeType,
    linkStatusReflectionEnable INTEGER,
    linkSubscriberSidePortIndex INTEGER,
    linkNetworkSidePortIndex INTEGER
    }

linkModuleIndex OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "An index value that uniquely identifies the module
        where this link is located."
    ::= { linkEntry 1 }

linkIndex OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "An index value that uniquely identifies this link 
        within a module.  
        Valid entries are 1 to the value of moduleNumLinks
        for this module."
    ::= { linkEntry 2 }

linkAdminModeOnActive OBJECT-TYPE
    SYNTAX LinkModeType
--    Rsyntax INTEGER {
--        other(1),
--        bypass(2),
--        forwarding(3),
--        cutoff(4),
--        sniffing(5)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The desired mode of the link when the module's 
        operating status is Active and the module
        is not in boot or failure.
        The possible modes are bypass, forwarding and sniffing.
        In bypass mode the traffic is forwarded 
        from one port to the other using an internal splitter.
        In forwarding mode the traffic is forwarded through the
        internal hardware and software modules of the SE.
        In sniffing mode the traffic is passed in the same 
        manner as in bypass mode, however a copy of the traffic
        is made and analyzed internally in the box."
    ::= { linkEntry 3 }

linkAdminModeOnFailure OBJECT-TYPE
    SYNTAX LinkModeType
--    Rsyntax INTEGER {
--        other(1),
--        bypass(2),
--        forwarding(3),
--        cutoff(4),
--        sniffing(5)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The desired mode of the link when the system's 
        operational status is Failure.
        The possible modes are Bypass and Cutoff.
        In Bypass mode the traffic is forwarded 
        from one port to the other using an internal splitter.
        In Cutoff mode the traffic is dropped by the SE."
    ::= { linkEntry 4 }

linkOperMode OBJECT-TYPE
    SYNTAX LinkModeType
--    Rsyntax INTEGER {
--        other(1),
--        bypass(2),
--        forwarding(3),
--        cutoff(4),
--        sniffing(5)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The operational mode of the link.
        In Bypass mode the traffic is forwarded from one port 
        to the other using an internal splitter.
        In Forwarding mode the traffic is forwarded through 
        the internal software and hardware modules of the SCE.
        In Sniffing mode the traffic is forwarded in the same 
        manner as in Bypass mode, however the traffic
        is passed through the internal software and 
        hardware modules of the SCE for analyzing.
        in Cutoff mode the traffic is dropped by 
        the SCE platform."
    ::= { linkEntry 5 }

linkStatusReflectionEnable OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates if failure of the physical link on one i/f 
        should trigger the failure of the link 
        on the other i/f."
    ::= { linkEntry 6 }

linkSubscriberSidePortIndex OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "An index value that uniquely identifies this link with 
        its related port that is connected to the subscriber 
        side."
    ::= { linkEntry 7 }

linkNetworkSidePortIndex OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "An index value that uniquely identifies this link with 
        its related port that is connected to
        the network side."
    ::= { linkEntry 8 }

diskNumUsedBytes OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
--  Units
--    bytes
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of used bytes."
    ::= { diskGrp 1 }

diskNumFreeBytes OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
--  Units
--    bytes
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of free bytes."
    ::= { diskGrp 2 }

rdrFormatterEnable OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates whether the RDR-formatter is enabled or 
        disabled. When the RDR-formatter is enabled, 
        it sends the reports it gets from the traffic processors
        to the Data Collector as defined in the rdrFormatterDestTable."
    ::= { rdrFormatterGrp 1 }

rdrFormatterDestTable OBJECT-TYPE
    SYNTAX SEQUENCE OF RdrFormatterDestEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The RDR-formatter destinations table (0 to 3 entries).
        This table lists the addresses of Data Collectors.
        If the RDR-formatter is enabled, the destination with
        the highest priority that a TCP connection to it can be
        established would receive the reports generated by the 
        traffic processors."
    ::= { rdrFormatterGrp 2 }

rdrFormatterDestEntry OBJECT-TYPE
    SYNTAX RdrFormatterDestEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A destination table entry."
    INDEX { rdrFormatterDestIPAddr, rdrFormatterDestPort }
    ::= { rdrFormatterDestTable 1 }

RdrFormatterDestEntry ::= SEQUENCE {
    rdrFormatterDestIPAddr IpAddress,
    rdrFormatterDestPort INTEGER,
    rdrFormatterDestPriority INTEGER,
    rdrFormatterDestStatus INTEGER,
    rdrFormatterDestConnectionStatus INTEGER,
    rdrFormatterDestNumReportsSent Gauge,
    rdrFormatterDestNumReportsDiscarded Gauge,
    rdrFormatterDestReportRate Gauge,
    rdrFormatterDestReportRatePeak Gauge,
    rdrFormatterDestReportRatePeakTime TimeTicks
    }

rdrFormatterDestIPAddr OBJECT-TYPE
    SYNTAX IpAddress
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The IP address of a Data Collector."
    ::= { rdrFormatterDestEntry 1 }

rdrFormatterDestPort OBJECT-TYPE
    SYNTAX INTEGER(1..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The TCP port on which the Data Collector listens."
    ::= { rdrFormatterDestEntry 2 }

rdrFormatterDestPriority OBJECT-TYPE
    SYNTAX INTEGER(1..100)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The priority given to the Data Collector.
        The active Data Collector is the Data Collector with
        the highest priority and a TCP connection that is up."
    ::= { rdrFormatterDestEntry 3 }

rdrFormatterDestStatus OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),
        active(2),
        standby(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "In 'redundancy(2)' and in 'simpleLoadBalancing(3)'
        rdrFormatterForwardingMode there can be only 
        one 'active' destination, which is where the 
        reports are currently being sent to.
        In 'multicast(4)' modes all destinations will
        receive the active(2) status."
    ::= { rdrFormatterDestEntry 4 }

rdrFormatterDestConnectionStatus OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),
        up(2),
        down(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the status of TCP connection
        to this destination."
    ::= { rdrFormatterDestEntry 5 }

rdrFormatterDestNumReportsSent OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the number of reports sent by the 
        RDR-formatter to this destination."
    ::= { rdrFormatterDestEntry 6 }

rdrFormatterDestNumReportsDiscarded OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        " Indicates the number of reports dropped by the 
          RDR-formatter on this destination."
    ::= { rdrFormatterDestEntry 7 }

rdrFormatterDestReportRate OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the rate of the reports 
        (in reports per second) currently sent to this
        destination."
    ::= { rdrFormatterDestEntry 8 }

rdrFormatterDestReportRatePeak OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the maximum report rate sent 
        to this destination."
    ::= { rdrFormatterDestEntry 9 }

rdrFormatterDestReportRatePeakTime OBJECT-TYPE
    SYNTAX TimeTicks
--  Units
--    milliseconds
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the time since
        the rdrFormatterDestReportRatePeak value occurred."
    ::= { rdrFormatterDestEntry 10 }

rdrFormatterNumReportsSent OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the number of reports sent by the 
        RDR-formatter."
    ::= { rdrFormatterGrp 3 }

rdrFormatterNumReportsDiscarded OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the number of reports dropped by the 
        RDR-formatter."
    ::= { rdrFormatterGrp 4 }

rdrFormatterClearCountersTime OBJECT-TYPE
    SYNTAX TimeTicks
--  Units
--    milliseconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The time since RDR-formatter counters
        were last cleared. Writing a 0 to this
        object causes the RDR-formatter counters
        to be cleared."
    ::= { rdrFormatterGrp 5 }

rdrFormatterReportRate OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the rate of the reports 
        (in reports per second) currently 
        sent to all of the destinations."
    ::= { rdrFormatterGrp 6 }

rdrFormatterReportRatePeak OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the maximum report rate sent to all
        of the destinations."
    ::= { rdrFormatterGrp 7 }

rdrFormatterReportRatePeakTime OBJECT-TYPE
    SYNTAX TimeTicks
--  Units
--    milliseconds
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the time since
        the rdrFormatterReportRatePeak value occurred."
    ::= { rdrFormatterGrp 8 }

rdrFormatterProtocol OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),
        rdrv1(2),
        rdrv2(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the RDR protocol currently in use."
    ::= { rdrFormatterGrp 9 }

rdrFormatterForwardingMode OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),
        redundancy(2),
        simpleLoadBalancing(3),
        multicast(4)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the mode of how the RDR formatter sends the 
        reports to its destinations."
    ::= { rdrFormatterGrp 10 }

rdrFormatterCategoryTable OBJECT-TYPE
    SYNTAX SEQUENCE OF RdrFormatterCategoryEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The RDR-formatter Category table. 
        Describes the different categories of RDRs and RDR
        destination groups."
    ::= { rdrFormatterGrp 11 }

rdrFormatterCategoryEntry OBJECT-TYPE
    SYNTAX RdrFormatterCategoryEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A category table entry."
    INDEX { rdrFormatterCategoryIndex }
    ::= { rdrFormatterCategoryTable 1 }

RdrFormatterCategoryEntry ::= SEQUENCE {
    rdrFormatterCategoryIndex INTEGER,
    rdrFormatterCategoryName SnmpAdminString,
    rdrFormatterCategoryNumReportsSent Gauge,
    rdrFormatterCategoryNumReportsDiscarded Gauge,
    rdrFormatterCategoryReportRate Gauge,
    rdrFormatterCategoryReportRatePeak Gauge,
    rdrFormatterCategoryReportRatePeakTime TimeTicks,
    rdrFormatterCategoryNumReportsQueued Gauge
    }

rdrFormatterCategoryIndex OBJECT-TYPE
    SYNTAX INTEGER(1..4)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The category number."
    ::= { rdrFormatterCategoryEntry 1 }

rdrFormatterCategoryName OBJECT-TYPE
    SYNTAX SnmpAdminString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The name given to this category."
    ::= { rdrFormatterCategoryEntry 2 }

rdrFormatterCategoryNumReportsSent OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the number of reports sent by the 
        RDR-formatter to this category."
    ::= { rdrFormatterCategoryEntry 3 }

rdrFormatterCategoryNumReportsDiscarded OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the number of reports dropped by the 
        RDR-formatter on this category."
    ::= { rdrFormatterCategoryEntry 4 }

rdrFormatterCategoryReportRate OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the rate of the reports 
        (in reports per second) currently sent 
        to this category."
    ::= { rdrFormatterCategoryEntry 5 }

rdrFormatterCategoryReportRatePeak OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the maximum report rate sent to this category."
    ::= { rdrFormatterCategoryEntry 6 }

rdrFormatterCategoryReportRatePeakTime OBJECT-TYPE
    SYNTAX TimeTicks
--  Units
--    milliseconds
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the time 
        since the rdrFormatterCategoryReportRatePeak 
        value occurred."
    ::= { rdrFormatterCategoryEntry 7 }

rdrFormatterCategoryNumReportsQueued OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the amount of pending reports in this 
        category."
    ::= { rdrFormatterCategoryEntry 8 }

rdrFormatterCategoryDestTable OBJECT-TYPE
    SYNTAX SEQUENCE OF RdrFormatterCategoryDestEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The RDR-formatter Category destinations table. 
        This table lists the addresses of Data Collectors.
        If the RDR-formatter is enabled, the destination with
        the highest priority that a TCP connection to it can be
        established would receive the reports generated by the
        traffic processors."
    ::= { rdrFormatterGrp 12 }

rdrFormatterCategoryDestEntry OBJECT-TYPE
    SYNTAX RdrFormatterCategoryDestEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A destination table entry."
    INDEX { rdrFormatterCategoryIndex, rdrFormatterDestIPAddr, rdrFormatterDestPort }
    ::= { rdrFormatterCategoryDestTable 1 }

RdrFormatterCategoryDestEntry ::= SEQUENCE {
    rdrFormatterCategoryDestPriority INTEGER,
    rdrFormatterCategoryDestStatus INTEGER
    }

rdrFormatterCategoryDestPriority OBJECT-TYPE
    SYNTAX INTEGER(1..100)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The priority given to the Data Collector for this 
        category. The active Data Collector is the Data 
        Collector with the highest priority and a TCP 
        connection that is up."
    ::= { rdrFormatterCategoryDestEntry 1 }

rdrFormatterCategoryDestStatus OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),
        active(2),
        standby(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "In modes 'redundancy(2)' and in 'simpleLoadBalancing(3)'
        there can be only one 'active' destination, 
        which is the destination to which reports are
        being sent. In 'multicast(4)' modes all destination 
        will receive the 'active(2)' status."
    ::= { rdrFormatterCategoryDestEntry 2 }

loggerUserLogEnable OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates whether the logging of user information is
        enabled or disabled."
    ::= { loggerGrp 1 }

loggerUserLogNumInfo OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the number of Info messages logged into the
        user log file since last reboot or last time the
        counter was cleared."
    ::= { loggerGrp 2 }

loggerUserLogNumWarning OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the number of Warning messages logged into
        the user log file since last reboot or last time the 
        counter was cleared."
    ::= { loggerGrp 3 }

loggerUserLogNumError OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the number of Error messages logged into the
        user log file since last reboot or last time the counter
        was cleared."
    ::= { loggerGrp 4 }

loggerUserLogNumFatal OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the number of Fatal messages logged into the 
         User-Log since last reboot or last time the counter
         was cleared."
    ::= { loggerGrp 5 }

loggerUserLogClearCountersTime OBJECT-TYPE
    SYNTAX TimeTicks
--  Units
--    milliseconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The time since user log
        counters were last cleared.  Writing a 0 to this 
        object causes the user log counters to be cleared."
    ::= { loggerGrp 6 }

subscribersInfoTable OBJECT-TYPE
    SYNTAX SEQUENCE OF SubscribersInfoEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The subscribers information table consists of 
        data regarding subscribers management operations
        performed."
    ::= { subscribersGrp 1 }

subscribersInfoEntry OBJECT-TYPE
    SYNTAX SubscribersInfoEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A SubscribersInfoEntry entry."
    INDEX { pmoduleIndex }
    ::= { subscribersInfoTable 1 }

SubscribersInfoEntry ::= SEQUENCE {
    subscribersNumIntroduced Gauge,
    subscribersNumFree Gauge,
    subscribersNumIpAddrMappings Gauge,
    subscribersNumIpAddrMappingsFree Gauge,
    subscribersNumIpRangeMappings Gauge,
    subscribersNumIpRangeMappingsFree Gauge,
    subscribersNumVlanMappings Gauge,
    subscribersNumVlanMappingsFree Gauge,
    subscribersNumActive Gauge,
    subscribersNumActivePeak Gauge,
    subscribersNumActivePeakTime TimeTicks,
    subscribersNumUpdates Gauge,
    subscribersCountersClearTime TimeTicks,
    subscribersNumTpIpRanges Gauge,
    subscribersNumTpIpRangesFree Gauge,
    subscribersNumAnonymous Gauge,
    subscribersNumWithSessions Gauge
    }

subscribersNumIntroduced OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the current number of subscribers
        introduced to the SCE.
        These subscribers may or may not have IP address
        or VLAN mappings. Subscribers who do not have mappings
        of any kind cannot be associated with traffic, 
        thus will be served by the SCE according to the
        default settings. "
    ::= { subscribersInfoEntry 1 }

subscribersNumFree OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the number of subscribers that may be
        introduced in addition to the subscribers that 
        are already introduced to the SCE
        (subscribersNumIntroduced)."
    ::= { subscribersInfoEntry 2 }

subscribersNumIpAddrMappings OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the current number of 'IP address
        to subscriber' mappings."
    ::= { subscribersInfoEntry 3 }

subscribersNumIpAddrMappingsFree OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the number of free 'IP address to
        subscriber' mappings that may 
        be used for defining new mappings."
    ::= { subscribersInfoEntry 4 }

subscribersNumIpRangeMappings OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the current number of 'IP-range
        to subscriber' mappings."
    ::= { subscribersInfoEntry 5 }

subscribersNumIpRangeMappingsFree OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the number of free 'IP-range to
        subscriber' mappings that may 
        be used for defining new mappings."
    ::= { subscribersInfoEntry 6 }

subscribersNumVlanMappings OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the current number of VLAN to 
        subscribers mappings."
    ::= { subscribersInfoEntry 7 }

subscribersNumVlanMappingsFree OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the number of free 'VLAN to 
        subscriber' mappings that may be used for
        defining new mappings."
    ::= { subscribersInfoEntry 8 }

subscribersNumActive OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the current number of active subscribers,
        these subscribers necessarily 
        have an IP address or VLAN mappings
        that define the traffic that should be associated 
        and served according to the subscriber 
        service agreement."
    ::= { subscribersInfoEntry 9 }

subscribersNumActivePeak OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the peak value of subscribersNumActive
        since the last time it was cleared or the
        system started."
    ::= { subscribersInfoEntry 10 }

subscribersNumActivePeakTime OBJECT-TYPE
    SYNTAX TimeTicks
--  Units
--    milliseconds
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the time since 
        the subscribersNumActivePeak value occurred."
    ::= { subscribersInfoEntry 11 }

subscribersNumUpdates OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the accumulated number of subscribers
        database updates received by the SCE."
    ::= { subscribersInfoEntry 12 }

subscribersCountersClearTime OBJECT-TYPE
    SYNTAX TimeTicks
--  Units
--    milliseconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Indicates the time since 
        the subscribers counters were cleared. Writing a 0 
        to this object causes the counters to be cleared."
    ::= { subscribersInfoEntry 13 }

subscribersNumTpIpRanges OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the current number of 'Traffic Processor
        IP ranges' used."
    ::= { subscribersInfoEntry 14 }

subscribersNumTpIpRangesFree OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the number of free 'Traffic Processor
        IP ranges'."
    ::= { subscribersInfoEntry 15 }

subscribersNumAnonymous OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the current number of anonymous subscribers."
    ::= { subscribersInfoEntry 16 }

subscribersNumWithSessions OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the current number of subscribers
        with open sessions."
    ::= { subscribersInfoEntry 17 }

tpInfoTable OBJECT-TYPE
    SYNTAX SEQUENCE OF TpInfoEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The Traffic Processor Info table consists of 
        data regarding traffic handled by the traffic
        processors by classification of packets and flows."
    ::= { trafficProcessorGrp 1 }

tpInfoEntry OBJECT-TYPE
    SYNTAX TpInfoEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A tpInfoTable entry."
    INDEX { tpModuleIndex, tpIndex }
    ::= { tpInfoTable 1 }

TpInfoEntry ::= SEQUENCE {
    tpModuleIndex INTEGER,
    tpIndex INTEGER,
    tpTotalNumHandledPackets Gauge,
    tpTotalNumHandledFlows Gauge,
    tpNumActiveFlows Gauge,
    tpNumActiveFlowsPeak Gauge,
    tpNumActiveFlowsPeakTime TimeTicks,
    tpNumTcpActiveFlows Gauge,
    tpNumTcpActiveFlowsPeak Gauge,
    tpNumTcpActiveFlowsPeakTime TimeTicks,
    tpNumUdpActiveFlows Gauge,
    tpNumUdpActiveFlowsPeak Gauge,
    tpNumUdpActiveFlowsPeakTime TimeTicks,
    tpNumNonTcpUdpActiveFlows Gauge,
    tpNumNonTcpUdpActiveFlowsPeak Gauge,
    tpNumNonTcpUdpActiveFlowsPeakTime TimeTicks,
    tpTotalNumBlockedPackets Gauge,
    tpTotalNumBlockedFlows Gauge,
    tpTotalNumDiscardedPacketsDueToBwLimit Gauge,
    tpTotalNumWredDiscardedPackets Gauge,
    tpTotalNumFragments Gauge,
    tpTotalNumNonIpPackets Gauge,
    tpTotalNumIpCrcErrPackets Gauge,
    tpTotalNumIpLengthErrPackets Gauge,
    tpTotalNumIpBroadcastPackets Gauge,
    tpTotalNumTtlErrPackets Gauge,
    tpTotalNumTcpUdpCrcErrPackets Gauge,
    tpClearCountersTime TimeTicks,
    tpHandledPacketsRate Gauge,
    tpHandledPacketsRatePeak Gauge,
    tpHandledPacketsRatePeakTime TimeTicks,
    tpHandledFlowsRate Gauge,
    tpHandledFlowsRatePeak Gauge,
    tpHandledFlowsRatePeakTime TimeTicks,
    tpCpuUtilization INTEGER,
    tpCpuUtilizationPeak INTEGER,
    tpCpuUtilizationPeakTime TimeTicks,
    tpFlowsCapacityUtilization INTEGER,
    tpFlowsCapacityUtilizationPeak INTEGER,
    tpFlowsCapacityUtilizationPeakTime TimeTicks,
    tpServiceLoss INTEGER
    }

tpModuleIndex OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "An index value that uniquely identifies the module
        where this traffic processor is located."
    ::= { tpInfoEntry 1 }

tpIndex OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "An index value that uniquely identifies this traffic
        processor within a module.
        The value is determined by the location of the traffic
        processor on the module.  
        Valid entries are 1 to the value of 
        moduleNumTrafficProcessors for this module."
    ::= { tpInfoEntry 2 }

tpTotalNumHandledPackets OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the accumulated number of packets handled by
        this traffic processor since last reboot or last time
        this counter was cleared."
    ::= { tpInfoEntry 3 }

tpTotalNumHandledFlows OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the accumulated number of flows handled by 
        this traffic Processor since last reboot or last time
        this counter was cleared."
    ::= { tpInfoEntry 4 }

tpNumActiveFlows OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the number of flows currently being handled
        by this traffic processor."
    ::= { tpInfoEntry 5 }

tpNumActiveFlowsPeak OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the peak value of tpNumActiveFlows since the
        last time it was cleared or the system started."
    ::= { tpInfoEntry 6 }

tpNumActiveFlowsPeakTime OBJECT-TYPE
    SYNTAX TimeTicks
--  Units
--    milliseconds
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the time since
        the tpNumActiveFlowsPeak value occurred."
    ::= { tpInfoEntry 7 }

tpNumTcpActiveFlows OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the number of TCP flows currently being
        handled by this traffic processor."
    ::= { tpInfoEntry 8 }

tpNumTcpActiveFlowsPeak OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the peak value of tpNumTcpActiveFlows since
        the last time it was cleared or the system started."
    ::= { tpInfoEntry 9 }

tpNumTcpActiveFlowsPeakTime OBJECT-TYPE
    SYNTAX TimeTicks
--  Units
--    milliseconds
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the time since
        the tpNumTcpActiveFlowsPeak value occurred."
    ::= { tpInfoEntry 10 }

tpNumUdpActiveFlows OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the number of UDP flows currently being
        handled by this traffic processor."
    ::= { tpInfoEntry 11 }

tpNumUdpActiveFlowsPeak OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the peak value of tpNumUdpActiveFlows since
        the last time it was cleared or the system started."
    ::= { tpInfoEntry 12 }

tpNumUdpActiveFlowsPeakTime OBJECT-TYPE
    SYNTAX TimeTicks
--  Units
--    milliseconds
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the time since
        the tpNumUdpActiveFlowsPeak value occurred."
    ::= { tpInfoEntry 13 }

tpNumNonTcpUdpActiveFlows OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the number of non TCP/UDP flows currently
        being handled by this traffic processor."
    ::= { tpInfoEntry 14 }

tpNumNonTcpUdpActiveFlowsPeak OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the peak value of tpNumNonTcpUdpActiveFlows 
        since the last time it was cleared or the system 
        started."
    ::= { tpInfoEntry 15 }

tpNumNonTcpUdpActiveFlowsPeakTime OBJECT-TYPE
    SYNTAX TimeTicks
--  Units
--    milliseconds
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the time since
        the tpNumNonTcpUdpActiveFlowsPeak value occurred."
    ::= { tpInfoEntry 16 }

tpTotalNumBlockedPackets OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the accumulated number of packets discarded
        by this traffic processor according to application
        blocking rules."
    ::= { tpInfoEntry 17 }

tpTotalNumBlockedFlows OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the accumulated number of flows discarded by
        this traffic processor according to application
        blocking rules."
    ::= { tpInfoEntry 18 }

tpTotalNumDiscardedPacketsDueToBwLimit OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the accumulated number of packets discarded
        by this traffic processor due to subscriber bandwidth 
        limitations."
    ::= { tpInfoEntry 19 }

tpTotalNumWredDiscardedPackets OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the accumulated number of packets discarded
        by this traffic processor due to congestion in the 
        queues."
    ::= { tpInfoEntry 20 }

tpTotalNumFragments OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the accumulated number of fragmented packets 
        handled by this traffic processor."
    ::= { tpInfoEntry 21 }

tpTotalNumNonIpPackets OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the accumulated number of non IP packets
        handled by this traffic processor."
    ::= { tpInfoEntry 22 }

tpTotalNumIpCrcErrPackets OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the accumulated number of packets with IP CRC
        error handled by this traffic processor."
    ::= { tpInfoEntry 23 }

tpTotalNumIpLengthErrPackets OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the accumulated number of packets with IP
        length error handled by this traffic processor."
    ::= { tpInfoEntry 24 }

tpTotalNumIpBroadcastPackets OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the accumulated number of IP broadcast
        packets handled by this traffic processor."
    ::= { tpInfoEntry 25 }

tpTotalNumTtlErrPackets OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the accumulated number of packets with TTL
        error handled by this traffic processor."
    ::= { tpInfoEntry 26 }

tpTotalNumTcpUdpCrcErrPackets OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the accumulated number of TCP/UDP packets
        with CRC error handled by this traffic processor."
    ::= { tpInfoEntry 27 }

tpClearCountersTime OBJECT-TYPE
    SYNTAX TimeTicks
--  Units
--    milliseconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Indicates the time since 
        the traffic processor statistics counters were last 
        cleared.  Writing a 0 to this object causes the traffic
        processor counters to be cleared."
    ::= { tpInfoEntry 28 }

tpHandledPacketsRate OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the rate in packets per second of 
        the packets handled by this traffic processor."
    ::= { tpInfoEntry 29 }

tpHandledPacketsRatePeak OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the peak value of tpHandledPacketsRate
        since the last time it was cleared or the system
        started."
    ::= { tpInfoEntry 30 }

tpHandledPacketsRatePeakTime OBJECT-TYPE
    SYNTAX TimeTicks
--  Units
--    milliseconds
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the time since
        the tpHandledPacketsRatePeak value occurred."
    ::= { tpInfoEntry 31 }

tpHandledFlowsRate OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the rate in flows opening per second of the
        flows handled by this traffic processor."
    ::= { tpInfoEntry 32 }

tpHandledFlowsRatePeak OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the peak value of tpHandledFlowsRate since
        the last time it was cleared or the system started."
    ::= { tpInfoEntry 33 }

tpHandledFlowsRatePeakTime OBJECT-TYPE
    SYNTAX TimeTicks
--  Units
--    milliseconds
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the time since
        the tpHandledFlowsRatePeakTime value occurred."
    ::= { tpInfoEntry 34 }

tpCpuUtilization OBJECT-TYPE
    SYNTAX INTEGER(0..100)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the percentage of CPU utilization, updated
        once every 2 minutes."
    ::= { tpInfoEntry 35 }

tpCpuUtilizationPeak OBJECT-TYPE
    SYNTAX INTEGER(0..100)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the peak value of tpCpuUtilization since the
        last time it was cleared or the system started."
    ::= { tpInfoEntry 36 }

tpCpuUtilizationPeakTime OBJECT-TYPE
    SYNTAX TimeTicks
--  Units
--    milliseconds
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the time since
        the tpCpuUtilizationPeak value occurred."
    ::= { tpInfoEntry 37 }

tpFlowsCapacityUtilization OBJECT-TYPE
    SYNTAX INTEGER(0..100)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the percentage of flows capacity utilization."
    ::= { tpInfoEntry 38 }

tpFlowsCapacityUtilizationPeak OBJECT-TYPE
    SYNTAX INTEGER(0..100)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the peak value of tpFlowsCapacityUtilization 
        since the last time it was cleared or the system 
        started."
    ::= { tpInfoEntry 39 }

tpFlowsCapacityUtilizationPeakTime OBJECT-TYPE
    SYNTAX TimeTicks
--  Units
--    milliseconds
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the time since
        the tpFlowsCapacityUtilizationPeak value occurred."
    ::= { tpInfoEntry 40 }

tpServiceLoss OBJECT-TYPE
    SYNTAX INTEGER(0..100000)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the relative amount of service loss 
        in this traffic Processor, in units of 0.001%, 
        since last reboot or last time this counter was
        cleared."
    ::= { tpInfoEntry 41 }

pportTable OBJECT-TYPE
    SYNTAX SEQUENCE OF PportEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A list of port entries.  The number of entries is 
        determined by the number of modules in the chassis
        and the number of ports on each module."
    ::= { pportGrp 1 }

pportEntry OBJECT-TYPE
    SYNTAX PportEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Entry containing information for a particular port 
        on a module."
    INDEX { pportModuleIndex, pportIndex }
    ::= { pportTable 1 }

PportEntry ::= SEQUENCE {
    pportModuleIndex INTEGER,
    pportIndex INTEGER,
    pportType INTEGER,
    pportNumTxQueues INTEGER,
    pportIfIndex INTEGER,
    pportAdminSpeed INTEGER,
    pportAdminDuplex INTEGER,
    pportOperDuplex INTEGER,
    pportLinkIndex INTEGER,
    pportOperStatus INTEGER
    }

pportModuleIndex OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "An index value that uniquely identifies the module where
        this port is located."
    ::= { pportEntry 1 }

pportIndex OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "An index value that uniquely identifies this port
        within a module.  
        The value is determined by the location of the 
        port on the module.  Valid entries are 1 to the value
        of moduleNumPorts for this module."
    ::= { pportEntry 2 }

pportType OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),
        e100BaseTX(11),
        e1000BaseT(15),
        e1000BaseSX(28)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The type of physical layer medium dependent interface
        on the port."
    ::= { pportEntry 3 }

pportNumTxQueues OBJECT-TYPE
    SYNTAX INTEGER(0..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of transmit queues supported by this port."
    ::= { pportEntry 4 }

pportIfIndex OBJECT-TYPE
    SYNTAX INTEGER(0..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The value of the instance of the ifIndex object, 
        defined in MIB-II, for this port."
    ::= { pportEntry 5 }

pportAdminSpeed OBJECT-TYPE
    SYNTAX INTEGER {
        autoNegotiation(1),
        s10000000(10000000),
        s100000000(100000000),
        s1000000000(1000000000)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The desired speed of the port.
        The current operational speed of the port can be
        determined from ifSpeed."
    ::= { pportEntry 6 }

pportAdminDuplex OBJECT-TYPE
    SYNTAX INTEGER {
        half(1),
        full(2),
        auto(4)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The desired duplex of the port."
    ::= { pportEntry 7 }

pportOperDuplex OBJECT-TYPE
    SYNTAX INTEGER {
        half(1),
        full(2)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates whether the port is operating in half-duplex 
        or full-duplex."
    ::= { pportEntry 8 }

pportLinkIndex OBJECT-TYPE
    SYNTAX INTEGER(-1..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the linkIndex of the link that this port 
        belongs to. Value of 0 indicates that this port is
        not associated with any link. Value of -1 indicates 
        that this port is associated to multiple links."
    ::= { pportEntry 9 }

pportOperStatus OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),
        up(2),
        reflectionForcingDown(3),
        redundancyForcingDown(4),
        otherDown(5)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the status of the port and if the port is 
        down indicates the reason."
    ::= { pportEntry 10 }

txQueuesTable OBJECT-TYPE
    SYNTAX SEQUENCE OF TxQueuesEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table consists of information on the SCE's transmit
        queues."
    ::= { txQueuesGrp 1 }

txQueuesEntry OBJECT-TYPE
    SYNTAX TxQueuesEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A txQueuesTable entry."
    INDEX { txQueuesModuleIndex, txQueuesPortIndex, txQueuesQueueIndex }
    ::= { txQueuesTable 1 }

TxQueuesEntry ::= SEQUENCE {
    txQueuesModuleIndex INTEGER,
    txQueuesPortIndex INTEGER,
    txQueuesQueueIndex INTEGER,
    txQueuesDescription SnmpAdminString,
    txQueuesBandwidth INTEGER,
    txQueuesUtilization INTEGER,
    txQueuesUtilizationPeak INTEGER,
    txQueuesUtilizationPeakTime TimeTicks,
    txQueuesClearCountersTime TimeTicks,
    txQueuesDroppedBytes Counter
    }

txQueuesModuleIndex OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "An index value that uniquely identifies the module
        where this queue is located."
    ::= { txQueuesEntry 1 }

txQueuesPortIndex OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "An index value that uniquely identifies the port where
        this queue is located."
    ::= { txQueuesEntry 2 }

txQueuesQueueIndex OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "An index value that uniquely identifies this queue 
        within a port.  The value is determined by the
        location of the queue on the port.  Valid entries 
        are 1 to the value of portNumTxQueues for this module."
    ::= { txQueuesEntry 3 }

txQueuesDescription OBJECT-TYPE
    SYNTAX SnmpAdminString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Description of the transmit queue."
    ::= { txQueuesEntry 4 }

txQueuesBandwidth OBJECT-TYPE
    SYNTAX INTEGER(1..1000000)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The bandwidth in L1 kbps configured for this queue."
    ::= { txQueuesEntry 5 }

txQueuesUtilization OBJECT-TYPE
    SYNTAX INTEGER(0..100)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The percentage of bandwidth utilization relative to the 
        configured rate."
    ::= { txQueuesEntry 6 }

txQueuesUtilizationPeak OBJECT-TYPE
    SYNTAX INTEGER(0..100)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the peak value of txQueuesUtilization 
        since the last time it was cleared or the system started."
    ::= { txQueuesEntry 7 }

txQueuesUtilizationPeakTime OBJECT-TYPE
    SYNTAX TimeTicks
--  Units
--    milliseconds
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the time since the 
        txQueuesUtilizationPeak value occurred."
    ::= { txQueuesEntry 8 }

txQueuesClearCountersTime OBJECT-TYPE
    SYNTAX TimeTicks
--  Units
--    milliseconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Indicates the time since the
        TX queues statistics counters were last cleared.
        Writing a 0 to this object causes the TX queues
        counters to be cleared."
    ::= { txQueuesEntry 9 }

txQueuesDroppedBytes OBJECT-TYPE
    SYNTAX --?? syntax is not convertable to SMIv1
           Counter
--  Units
--    bytes
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Amount of dropped L3 bytes. This is valid only if the 
        system is configured to count dropped bytes per 
        TX queue."
    ::= { txQueuesEntry 10 }

globalControllersTable OBJECT-TYPE
    SYNTAX SEQUENCE OF GlobalControllersEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table consists of information on the SCE's Global
        Controllers. note: the globalControllersIndex and the 
        SCE CLI configuration index have a offset of one i.e. 
        1 in the MIB refers to 0 in the CLI."
    ::= { globalControllersGrp 1 }

globalControllersEntry OBJECT-TYPE
    SYNTAX GlobalControllersEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A globalControllersTable entry."
    INDEX { globalControllersModuleIndex, globalControllersPortIndex, globalControllersIndex }
    ::= { globalControllersTable 1 }

GlobalControllersEntry ::= SEQUENCE {
    globalControllersModuleIndex INTEGER,
    globalControllersPortIndex INTEGER,
    globalControllersIndex INTEGER,
    globalControllersDescription SnmpAdminString,
    globalControllersBandwidth INTEGER,
    globalControllersUtilization INTEGER,
    globalControllersUtilizationPeak INTEGER,
    globalControllersUtilizationPeakTime TimeTicks,
    globalControllersClearCountersTime TimeTicks,
    globalControllersDroppedBytes Counter
    }

globalControllersModuleIndex OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "An index value that uniquely identifies the module where
        this controller is located."
    ::= { globalControllersEntry 1 }

globalControllersPortIndex OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "An index value that uniquely identifies the port where 
        this controller is located."
    ::= { globalControllersEntry 2 }

globalControllersIndex OBJECT-TYPE
    SYNTAX INTEGER(1..2147483647)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "An index value that uniquely identifies this 
        controller within a port."
    ::= { globalControllersEntry 3 }

globalControllersDescription OBJECT-TYPE
    SYNTAX SnmpAdminString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Description of the controller."
    ::= { globalControllersEntry 4 }

globalControllersBandwidth OBJECT-TYPE
    SYNTAX INTEGER(1..1000000)
--  Units
--    Kbps
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The L1 bandwidth configured for this controller."
    ::= { globalControllersEntry 5 }

globalControllersUtilization OBJECT-TYPE
    SYNTAX INTEGER(0..100)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The percentage of bandwidth utilization relative to the 
        configured rate."
    ::= { globalControllersEntry 6 }

globalControllersUtilizationPeak OBJECT-TYPE
    SYNTAX INTEGER(0..100)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the peak value of globalControllersUtilization 
        since the last time it was cleared or the system started."
    ::= { globalControllersEntry 7 }

globalControllersUtilizationPeakTime OBJECT-TYPE
    SYNTAX TimeTicks
--  Units
--    milliseconds
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the time since the 
        globalControllersUtilizationPeak value occurred."
    ::= { globalControllersEntry 8 }

globalControllersClearCountersTime OBJECT-TYPE
    SYNTAX TimeTicks
--  Units
--    milliseconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Indicates the time since the
        controllers statistics counters were last cleared.
        Writing a 0 to this object causes the controllers
        counters to be cleared."
    ::= { globalControllersEntry 9 }

globalControllersDroppedBytes OBJECT-TYPE
    SYNTAX --?? syntax is not convertable to SMIv1
           Counter
--  Units
--    bytes
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Amount of L3 dropped bytes. This is valid only if the 
        system is configured to count dropped bytes per 
        global controller."
    ::= { globalControllersEntry 10 }

appInfoTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AppInfoEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table consists of information on the 
        SCE's application."
    ::= { applicationGrp 1 }

appInfoEntry OBJECT-TYPE
    SYNTAX AppInfoEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A appInfoTable entry."
    INDEX { pmoduleIndex }
    ::= { appInfoTable 1 }

AppInfoEntry ::= SEQUENCE {
    appName SnmpAdminString,
    appDescription SnmpAdminString,
    appVersion SnmpAdminString
    }

appName OBJECT-TYPE
    SYNTAX SnmpAdminString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The application name."
    ::= { appInfoEntry 1 }

appDescription OBJECT-TYPE
    SYNTAX SnmpAdminString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The application description."
    ::= { appInfoEntry 2 }

appVersion OBJECT-TYPE
    SYNTAX SnmpAdminString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The application version."
    ::= { appInfoEntry 3 }

appPropertiesTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AppPropertiesEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The application properties table provides the list
        of properties available for the application.
        The table is cleared when the application is unloaded."
    ::= { applicationGrp 2 }

appPropertiesEntry OBJECT-TYPE
    SYNTAX AppPropertiesEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A appPropertiesTable entry."
    INDEX { pmoduleIndex, apIndex }
    ::= { appPropertiesTable 1 }

AppPropertiesEntry ::= SEQUENCE {
    apIndex INTEGER,
    apName SnmpAdminString,
    apType SnmpAdminString
    }

apIndex OBJECT-TYPE
    SYNTAX INTEGER(0..1000000)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "An index value that uniquely identify the property."
    ::= { appPropertiesEntry 1 }

apName OBJECT-TYPE
    SYNTAX SnmpAdminString(SIZE(1..128))
--    Rsyntax OCTET STRING(SIZE(1..128))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Application property name.
        Property can be either scalar or array type."
    ::= { appPropertiesEntry 2 }

apType OBJECT-TYPE
    SYNTAX SnmpAdminString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Application property type."
    ::= { appPropertiesEntry 3 }

appPropertiesValueTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AppPropertiesValueEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The applications properties value table is used to
        provide specific values 
        for the applications properties.
        An entry must be created by setting the entry's 
        apvRowStatus object with 
        createAndGo (4) before setting the name of the 
        property requested. To specify the 
        property set the apvPropertyName objects. 
        The apvPropertyName must be one of the 
        properties from the appPropertiesTable. 
        To remove an entry set the apvRowStatus object 
        with destroy (6).
        To poll the application property, poll the 
        apvPropertyStringValue, apvPropertyUintValue, 
        or apvPropertyCounter64Value object.
        The table is cleared when the application is unloaded."
    ::= { applicationGrp 3 }

appPropertiesValueEntry OBJECT-TYPE
    SYNTAX AppPropertiesValueEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A appPropertiesValueTable entry."
    INDEX { pmoduleIndex, apvIndex }
    ::= { appPropertiesValueTable 1 }

AppPropertiesValueEntry ::= SEQUENCE {
    apvIndex INTEGER,
    apvPropertyName SnmpAdminString,
    apvRowStatus RowStatus,
    apvPropertyStringValue SnmpAdminString,
    apvPropertyUintValue Gauge,
    apvPropertyCounter64Value Counter
    }

apvIndex OBJECT-TYPE
    SYNTAX INTEGER(1..1024)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Index to the table."
    ::= { appPropertiesValueEntry 1 }

apvPropertyName OBJECT-TYPE
    SYNTAX SnmpAdminString(SIZE(1..128))
--    Rsyntax OCTET STRING(SIZE(1..128))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "A name that uniquely identifies the application
        property. Array type properties may be accessed
        each element at a time in C like format, e.g. x[1],
        or y[1][2]."
    ::= { appPropertiesValueEntry 2 }

apvRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object controls creation of a table entry."
    ::= { appPropertiesValueEntry 3 }

apvPropertyStringValue OBJECT-TYPE
    SYNTAX SnmpAdminString(SIZE(0..128))
--    Rsyntax OCTET STRING(SIZE(0..128))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The value of the application property in display 
        string format."
    ::= { appPropertiesValueEntry 4 }

apvPropertyUintValue OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The value of the application property in 
        unsigned integer. If the property 
        can't be casted to unsigned integer this 
        object returns zero."
    ::= { appPropertiesValueEntry 5 }

apvPropertyCounter64Value OBJECT-TYPE
    SYNTAX --?? syntax is not convertable to SMIv1
           Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The value of the application property in Counter64 format.
        If the property can't be casted to Counter64, getting 
        this object returns zero."
    ::= { appPropertiesValueEntry 6 }

subscribersPropertiesTable OBJECT-TYPE
    SYNTAX SEQUENCE OF SubscribersPropertiesEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The subscribers properties table provides 
        the list of properties available for each subscriber."
    ::= { subscribersGrp 2 }

subscribersPropertiesEntry OBJECT-TYPE
    SYNTAX SubscribersPropertiesEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A subscribersPropertiesTable entry."
    INDEX { pmoduleIndex, spIndex }
    ::= { subscribersPropertiesTable 1 }

SubscribersPropertiesEntry ::= SEQUENCE {
    spIndex INTEGER,
    spName SnmpAdminString,
    spType SnmpAdminString
    }

spIndex OBJECT-TYPE
    SYNTAX INTEGER(0..1000000)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "An index value that uniquely identify the property."
    ::= { subscribersPropertiesEntry 1 }

spName OBJECT-TYPE
    SYNTAX SnmpAdminString(SIZE(1..128))
--    Rsyntax OCTET STRING(SIZE(1..128))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Subscriber property name."
    ::= { subscribersPropertiesEntry 2 }

spType OBJECT-TYPE
    SYNTAX SnmpAdminString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Subscriber application property type in respect to: 
        variable type (integer, boolean, string etc), number of
        elements (scalar or array) and restrictions 
        if any exist."
    ::= { subscribersPropertiesEntry 3 }

subscribersPropertiesValueTable OBJECT-TYPE
    SYNTAX SEQUENCE OF SubscribersPropertiesValueEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The subscribers properties value table
        is used to provide subscriber properties
        values for subscribers introduced into the SCE.
        An entry must be created by setting the entry's 
        spvRowStatus object with createAndGo (4) before
        setting any other of the entry's objects. 
        To specify the subscriber's property set the 
        spvSubName and spvPropertyName objects.
        The spvPropertyName must be one of the 
        properties from the subscribersPropertiesTable.
        To remove an entry set the spvRowStatus object
        with destroy (6).
        To poll the subscriber property the manager 
        need to poll the spvPropertyStringValue, 
        the spvPropertyUintValue or the 
        spvPropertyCounter64Value objects.
        The table is cleared when the application
        is unloaded."
    ::= { subscribersGrp 3 }

subscribersPropertiesValueEntry OBJECT-TYPE
    SYNTAX SubscribersPropertiesValueEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A subscribersPropertiesValueTable entry."
    INDEX { pmoduleIndex, spvIndex }
    ::= { subscribersPropertiesValueTable 1 }

SubscribersPropertiesValueEntry ::= SEQUENCE {
    spvIndex INTEGER,
    spvSubName SnmpAdminString,
    spvPropertyName SnmpAdminString,
    spvRowStatus RowStatus,
    spvPropertyStringValue SnmpAdminString,
    spvPropertyUintValue Gauge,
    spvPropertyCounter64Value Counter
    }

spvIndex OBJECT-TYPE
    SYNTAX INTEGER(1..4096)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A index to the table."
    ::= { subscribersPropertiesValueEntry 1 }

spvSubName OBJECT-TYPE
    SYNTAX SnmpAdminString(SIZE(1..40))
--    Rsyntax OCTET STRING(SIZE(1..40))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "A name that uniquely identifies the subscriber."
    ::= { subscribersPropertiesValueEntry 2 }

spvPropertyName OBJECT-TYPE
    SYNTAX SnmpAdminString(SIZE(1..128))
--    Rsyntax OCTET STRING(SIZE(1..128))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "A name that uniquely identifies the subscriber property. 
        Array type properties may be accessed each element 
        at a time  in C like format, e.g. x[1], or y[1][2]."
    ::= { subscribersPropertiesValueEntry 3 }

spvRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object controls creation of a table entry. 
        Only setting the createAndGo (4) and destroy (6)
        will change the status of the entry."
    ::= { subscribersPropertiesValueEntry 4 }

spvPropertyStringValue OBJECT-TYPE
    SYNTAX SnmpAdminString(SIZE(0..128))
--    Rsyntax OCTET STRING(SIZE(0..128))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The value of the subscriber property in  string format."
    ::= { subscribersPropertiesValueEntry 5 }

spvPropertyUintValue OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The value of the subscriber property in unsigned 
        integer. If the property can't be casted to
        unsigned integer this object returns zero."
    ::= { subscribersPropertiesValueEntry 6 }

spvPropertyCounter64Value OBJECT-TYPE
    SYNTAX --?? syntax is not convertable to SMIv1
           Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The value of the subscriber property in
        Counter64. If the property can't be casted
        to Counter64 this object returns zero."
    ::= { subscribersPropertiesValueEntry 7 }

trafficCountersTable OBJECT-TYPE
    SYNTAX SEQUENCE OF TrafficCountersEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The Traffic counters table provides information 
        regarding the value of different the traffic counters."
    ::= { trafficCountersGrp 1 }

trafficCountersEntry OBJECT-TYPE
    SYNTAX TrafficCountersEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Entry containing information about a traffic counter."
    INDEX { pmoduleIndex, trafficCounterIndex }
    ::= { trafficCountersTable 1 }

TrafficCountersEntry ::= SEQUENCE {
    trafficCounterIndex INTEGER,
    trafficCounterValue Counter,
    trafficCounterName SnmpAdminString,
    trafficCounterType INTEGER
    }

trafficCounterIndex OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "An index value that uniquely identifies the counter."
    ::= { trafficCountersEntry 1 }

trafficCounterValue OBJECT-TYPE
    SYNTAX --?? syntax is not convertable to SMIv1
           Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "A 64 bit counter value."
    ::= { trafficCountersEntry 2 }

trafficCounterName OBJECT-TYPE
    SYNTAX SnmpAdminString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The name given to this counter."
    ::= { trafficCountersEntry 3 }

trafficCounterType OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),
        bytes(2),
        packets(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Defines whether there the traffic counters counts by 
        'packets(3)' or by 'bytes(2)'."
    ::= { trafficCountersEntry 4 }

attackTypeTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AttackTypeEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The Attack type table provides information regarding 
        detected attacks, aggregated by attack type."
    ::= { attackGrp 1 }

attackTypeEntry OBJECT-TYPE
    SYNTAX AttackTypeEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Entry containing aggregated information about attacks
        of a given type."
    INDEX { pmoduleIndex, attackTypeIndex }
    ::= { attackTypeTable 1 }

AttackTypeEntry ::= SEQUENCE {
    attackTypeIndex INTEGER,
    attackTypeName SnmpAdminString,
    attackTypeCurrentNumAttacks Gauge,
    attackTypeTotalNumAttacks Gauge,
    attackTypeTotalNumFlows Counter,
    attackTypeTotalNumSeconds Gauge
    }

attackTypeIndex OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "An index value that uniquely identifies the attack type."
    ::= { attackTypeEntry 1 }

attackTypeName OBJECT-TYPE
    SYNTAX SnmpAdminString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The name of this attack type."
    ::= { attackTypeEntry 2 }

attackTypeCurrentNumAttacks OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The current amount of attacks detected of this type."
    ::= { attackTypeEntry 3 }

attackTypeTotalNumAttacks OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total amount of attacks detected of this type 
        since last clear."
    ::= { attackTypeEntry 4 }

attackTypeTotalNumFlows OBJECT-TYPE
    SYNTAX --?? syntax is not convertable to SMIv1
           Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total amount of flows in attacks detected of 
        this type since last clear."
    ::= { attackTypeEntry 5 }

attackTypeTotalNumSeconds OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
--  Units
--    Seconds
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total duration of attacks detected of this type
        since last clear."
    ::= { attackTypeEntry 6 }

vasServerTable OBJECT-TYPE
    SYNTAX SEQUENCE OF VasServerEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The VAS server Table provides information on each
        VAS server operational status."
    ::= { vasTrafficForwardingGrp 1 }

vasServerEntry OBJECT-TYPE
    SYNTAX VasServerEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Entry containing information about VAS server status."
    INDEX { pmoduleIndex, vasServerIndex }
    ::= { vasServerTable 1 }

VasServerEntry ::= SEQUENCE {
    vasServerIndex INTEGER,
    vasServerId INTEGER,
    vasServerAdminStatus INTEGER,
    vasServerOperStatus INTEGER
    }

vasServerIndex OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "An index value that uniquely identifies a VAS server."
    ::= { vasServerEntry 1 }

vasServerId OBJECT-TYPE
    SYNTAX INTEGER(0..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The ID of the VAS server."
    ::= { vasServerEntry 2 }

vasServerAdminStatus OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),
        up(2),
        down(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates only the administrative status of the 
        VAS sever, in order to activate a server it should
        be also configured with a VLAN and a group."
    ::= { vasServerEntry 3 }

vasServerOperStatus OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),
        up(2),
        down(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the operational status of the VAS sever."
    ::= { vasServerEntry 4 }

mplsVpnSoftwareCountersTable OBJECT-TYPE
    SYNTAX SEQUENCE OF MplsVpnSoftwareCountersEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The MPLS VPN software counters table 
        provides information on 
        various system software 
        counters related to MPLS VPN auto learn."
    ::= { mplsVpnAutoLearnGrp 1 }

mplsVpnSoftwareCountersEntry OBJECT-TYPE
    SYNTAX MplsVpnSoftwareCountersEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Entry containing information 
        about MPLS VPN auto learn SW counters."
    INDEX { pmoduleIndex }
    ::= { mplsVpnSoftwareCountersTable 1 }

MplsVpnSoftwareCountersEntry ::= SEQUENCE {
    mplsVpnMaxHWMappings INTEGER,
    mplsVpnCurrentHWMappings INTEGER
    }

mplsVpnMaxHWMappings OBJECT-TYPE
    SYNTAX INTEGER(0..1000000)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The maximum number of MPLS VPN
        mappings supported by HW (including all kinds
        of mappings)."
    ::= { mplsVpnSoftwareCountersEntry 1 }

mplsVpnCurrentHWMappings OBJECT-TYPE
    SYNTAX INTEGER(0..1000000)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The current number of HW MPLS
        VPN mappings in use."
    ::= { mplsVpnSoftwareCountersEntry 2 }

pcubeSeEventGenericString1 OBJECT-TYPE
    SYNTAX SnmpAdminString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Temporary string used for traps. Always returns 
        an empty string."
    ::= { pcubeSeEvents 23 }

pcubeSeEventGenericString2 OBJECT-TYPE
    SYNTAX SnmpAdminString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Temporary string used for traps. Always returns 
        an empty string."
    ::= { pcubeSeEvents 24 }

pullRequestNumber OBJECT-TYPE
    SYNTAX INTEGER(1..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Used only for traps to signify the number of pull
        requests issued so far for the anonymous subscriber given in
        the pullRequestRetryFailedTrap containing notification.
        A direct get will always returns 0."
    ::= { pcubeSeEvents 46 }

operationalStatusOperationalTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
    VARIABLES {
        sysOperationalStatus }
--  Status
--    mandatory
    DESCRIPTION
        "OperationalStatusOperational notification signifies that the
        agent entity has detected the sysOperationalStatus
        object in this MIB has changed to 'operational(3)'."
    ::= 1

operationalStatusWarningTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
    VARIABLES {
        sysOperationalStatus }
--  Status
--    mandatory
    DESCRIPTION
        "OperationalStatusWarning notification signifies that the agent
        entity has detected the sysOperationalStatus object
        in this MIB has changed to 'warning(4)'."
    ::= 2

operationalStatusFailureTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
    VARIABLES {
        sysOperationalStatus }
--  Status
--    mandatory
    DESCRIPTION
        "OperationalStatusFailure notification signifies that the agent
        entity has detected the sysOperationalStatus object in 
        this MIB has changed to 'failure(5)'."
    ::= 3

systemResetTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
--  Status
--    mandatory
    DESCRIPTION
        "A systemReset notification signifies that the agent entity
        is about to reset itself either per user's request or 
        due to a fatal event."
    ::= 4

chassisTempAlarmOnTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
    VARIABLES {
        pchassisTempAlarm }
--  Status
--    mandatory
    DESCRIPTION
        "A chassisTempAlarmOn notification signifies that the agent
        entity has detected the chassisTempAlarm object in this
        MIB has changed to the 'on(3)' state 
        (temperature is too high)."
    ::= 5

chassisTempAlarmOffTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
    VARIABLES {
        pchassisTempAlarm }
--  Status
--    mandatory
    DESCRIPTION
        "A chassisTempAlarmOff notification signifies that the agent
         entity has detected the chassisTempAlarm object in this
         MIB has changed to the 'off(2)' state 
         (temperature level is back to normal)."
    ::= 6

chassisVoltageAlarmOnTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
    VARIABLES {
        pchassisVoltageAlarm }
--  Status
--    mandatory
    DESCRIPTION
        "A chassisVoltageAlarmOn notification signifies that the agent
        entity has detected the chassisVoltageAlarm object in this
        MIB has changed to the 'on(3)' state
        (voltage level is too high)."
    ::= 7

chassisFansAlarmOnTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
    VARIABLES {
        pchassisFansAlarm }
--  Status
--    mandatory
    DESCRIPTION
        "A chassisFanStatusFailure notification signifies that the
        agent entity has detected the chassisFansAlarm object in this
        MIB has changed to the 'on(3)' state."
    ::= 8

chassisPowerSupplyAlarmOnTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
    VARIABLES {
        pchassisPowerSupplyAlarm }
--  Status
--    mandatory
    DESCRIPTION
        "A chassisPsuStatusFailure notification signifies that the
        agent entity has detected the chassisPowerSupplyAlarm object
        in this MIB has changed to the 'on(3)' state."
    ::= 9

rdrActiveConnectionTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
    VARIABLES {
        rdrFormatterDestIPAddr, rdrFormatterDestStatus }
--  Status
--    mandatory
    DESCRIPTION
        "RdrConnectionDestTypeActive notification signifies that 
        the agent entity has detected the rdrFormatterDestStatus 
        object in this MIB has changed to the 'active(2)' state."
    ::= 10

rdrNoActiveConnectionTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
--  Status
--    mandatory
    DESCRIPTION
        "A rdrNoActiveConnection notification signifies that the 
        agent entity has detected  there is no active 
        connection between the RDR-formatter and any 
        Data Collector."
    ::= 11

rdrConnectionUpTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
    VARIABLES {
        rdrFormatterDestIPAddr, rdrFormatterDestConnectionStatus }
--  Status
--    mandatory
    DESCRIPTION
        "RdrConnectionStatusUp notification signifies that the agent 
        entity has detected the rdrFormatterDestConnectionStatus 
        object in this MIB has changed to 'up(2)'."
    ::= 12

rdrConnectionDownTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
    VARIABLES {
        rdrFormatterDestIPAddr, rdrFormatterDestConnectionStatus }
--  Status
--    mandatory
    DESCRIPTION
        "RdrConnectionStatusDown notification signifies that the agent
        entity has detected the rdrFormatterDestConnectionStatus
        object in this MIB has changed to 'down(3)'."
    ::= 13

telnetSessionStartedTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
--  Status
--    deprecated
    DESCRIPTION
        "Replaced by the more generic sessionStartedTrap."
    ::= 14

telnetSessionEndedTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
--  Status
--    deprecated
    DESCRIPTION
        "Replaced by the more generic sessionEndedTrap."
    ::= 15

telnetSessionDeniedAccessTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
--  Status
--    deprecated
    DESCRIPTION
        "Replaced by the more generic sessionDeniedAccessTrap."
    ::= 16

telnetSessionBadLoginTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
--  Status
--    deprecated
    DESCRIPTION
        "Replaced by the more generic sessionBadLoginTrap."
    ::= 17

loggerUserLogIsFullTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
--  Status
--    mandatory
    DESCRIPTION
        "A loggerUserLogIsFull notification signifies that the agent 
        entity has detected the User log file is full.
        In such case the agent entity rolls to the next file."
    ::= 18

sntpClockDriftWarnTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
--  Status
--    mandatory
    DESCRIPTION
        "An sntpClockDriftWarn notification signifies that the entity's
        SNTP agent did not receive time update for 
        a long period, this may cause a time drift."
    ::= 19

linkModeBypassTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
    VARIABLES {
        linkOperMode }
--  Status
--    mandatory
    DESCRIPTION
        "A linkModeBypass notification signifies that the agent entity
        has detected that the linkOperMode object in this MIB 
        has changed to 'bypass(2)'."
    ::= 20

linkModeForwardingTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
    VARIABLES {
        linkOperMode }
--  Status
--    mandatory
    DESCRIPTION
        "A linkModeForwarding notification signifies that the agent
        entity has detected that the linkOperMode object
        in this MIB has changed to 'forwarding(3)'."
    ::= 21

linkModeCutoffTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
    VARIABLES {
        linkOperMode }
--  Status
--    mandatory
    DESCRIPTION
        "A linkModeCutoff notification signifies that the agent 
        entity has detected that the linkOperMode object
        in this MIB has changed to 'cutoff(4)'."
    ::= 22

moduleAttackFilterActivatedTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
    VARIABLES {
        pmoduleIndex, pcubeSeEventGenericString1 }
--  Status
--    mandatory
    DESCRIPTION
        "A moduleAttackFilterActivated notification signifies 
        that the agent entity's attack filter module has
        activated a filter. The pcubeSeEventGenericString1 
        is the type of attack-filter, which was activated."
    ::= 25

moduleAttackFilterDeactivatedTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
    VARIABLES {
        pmoduleIndex, pcubeSeEventGenericString1, 
        pcubeSeEventGenericString2 }
--  Status
--    mandatory
    DESCRIPTION
        "A portAttackFilterDeactivated notification signifies that the
        agent entity's attack filter module has removed a 
        filter that was previously activated.
        The pcubeSeEventGenericString1 is the attack-filter 
        type, which was sent in the corresponding 
        moduleAttackFilterActivatedTrap.
        the pcubeSeEventGenericString2 is the reason
        for deactivating the filter."
    ::= 26

moduleEmAgentGenericTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
    VARIABLES {
        pmoduleIndex, pcubeSeEventGenericString1, 
        pcubeSeEventGenericString2 }
--  Status
--    mandatory
    DESCRIPTION
        "A generic notification used by the P-Cube EM agent. 
        pcubeSeEventGenericString1 specifies what 
        notification is it, and pcubeSeEventGenericString2 
        is the relevant parameter."
    ::= 27

linkModeSniffingTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
    VARIABLES {
        linkOperMode }
--  Status
--    mandatory
    DESCRIPTION
        "A linkModeSniffing notification signifies that the 
        agent entity has detected  that the linkOperMode 
        object in this MIB has changed to 'sniffing(5)'."
    ::= 28

moduleRedundancyReadyTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
    VARIABLES {
        pmoduleIndex, pmoduleOperStatus }
--  Status
--    mandatory
    DESCRIPTION
        "A moduleRedundancyReady notification signifies that the module
        was able to connect and synchronize with a redundant entity, 
        and is now ready to handle fail-over if needed."
    ::= 29

moduleRedundantConfigurationMismatchTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
    VARIABLES {
        pmoduleIndex }
--  Status
--    mandatory
    DESCRIPTION
        "A moduleRedundantConfigurationMismatch notification signifies 
        that the module was not able to synchronize with a redundant 
        entity, due to a essential configuration parameters that are do
        not match between the
        module and the redundant entity."
    ::= 30

moduleLostRedundancyTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
    VARIABLES {
        pmoduleIndex, pmoduleOperStatus }
--  Status
--    mandatory
    DESCRIPTION
        "A moduleLostRedundancy notification signifies that the module
        has lost the ability to perform the fail-over procedure."
    ::= 31

moduleSmConnectionDownTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
    VARIABLES {
        pmoduleIndex }
--  Status
--    mandatory
    DESCRIPTION
        "A moduleSmConnectionDown notification signifies that the 
        module's virtual connection to the subscriber 
        manager is broken."
    ::= 32

moduleSmConnectionUpTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
    VARIABLES {
        pmoduleIndex }
--  Status
--    mandatory
    DESCRIPTION
        "A moduleSmConnectionUp notification signifies that 
        the module's virtual connection to the subscriber manager 
        is up and working."
    ::= 33

moduleOperStatusChangeTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
    VARIABLES {
        pmoduleIndex, pmoduleOperStatus }
--  Status
--    mandatory
    DESCRIPTION
        "A moduleOperStatusChangeTrap notification signifies
        that the moduleOperStatus has changed its value."
    ::= 34

portOperStatusChangeTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
    VARIABLES {
        pmoduleIndex, pportIndex, pportOperStatus }
--  Status
--    mandatory
    DESCRIPTION
        "A portOperStatusChangeTrap notification signifies 
        that the portOperStatus object of the portIndex has changed
        its value, i.e., the link was forced down or the force 
        down was released."
    ::= 35

chassisLineFeedAlarmOnTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
    VARIABLES {
        pchassisLineFeedAlarm }
--  Status
--    mandatory
    DESCRIPTION
        "A chassisLineFeedAlarmOn notification signifies that the agent
        entity has detected the chassisLineFeed object in this
        MIB has changed to the 'on(3)' state."
    ::= 36

rdrFormatterCategoryDiscardingReportsTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
    VARIABLES {
        rdrFormatterCategoryIndex }
--  Status
--    mandatory
    DESCRIPTION
        "rdrCategoryDiscardingReportsTrap notification signifies that
        the agent entity has detected that reports send to this
        category are being discarded. 
        The rdrFormatterCategoryNumReportsDiscarded object in 
        this MIB is counting the amount of discarded reports."
    ::= 37

rdrFormatterCategoryStoppedDiscardingReportsTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
    VARIABLES {
        rdrFormatterCategoryIndex }
--  Status
--    mandatory
    DESCRIPTION
        "rdrCategoryStoppedDiscardingReportsTrap notification signifies 
        that the agent entity has detected that reports send to this 
        category are not being discarded any more. 
        The rdrFormatterCategoryNumReportsDiscarded object in this
        MIB is counting the amount of discarded reports."
    ::= 38

sessionStartedTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
    VARIABLES {
        pcubeSeEventGenericString1 }
--  Status
--    mandatory
    DESCRIPTION
        "A sessionStarted notification signifies that the agent
        entity has accepted a new session. 
        The pcubeSeEventGenericString1 is the session 
        type (telnet/SSH) and client IP address."
    ::= 39

sessionEndedTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
    VARIABLES {
        pcubeSeEventGenericString1 }
--  Status
--    mandatory
    DESCRIPTION
        "A sessionEnded notification signifies that the agent
        entity has detected end of a session. 
        The pcubeSeEventGenericString1 is the session 
        type (telnet/SSH) and client IP address."
    ::= 40

sessionDeniedAccessTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
--  Status
--    mandatory
    DESCRIPTION
        "A sessionDeniedAccess notification signifies that the agent
        entity has refused a session from unauthorized source.
        The pcubeSeEventGenericString1 is the session type 
        (telnet/SSH) and client IP address."
    ::= 41

sessionBadLoginTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
--  Status
--    mandatory
    DESCRIPTION
        "A sessionBadLogin notification signifies that the agent
        entity has detected attempt to login with a wrong
        password. The pcubeSeEventGenericString1 
        is the session type (telnet/SSH) and client IP address."
    ::= 42

illegalSubscriberMappingTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
    VARIABLES {
        pmoduleIndex, pcubeSeEventGenericString1 }
--  Status
--    mandatory
    DESCRIPTION
        "A illegalSubscriberMappingTrap notification signifies that 
        some external entity has attempted to create illegal or 
        inconsistent subscriber mappings. 
        The pcubeSeEventGenericString1 contains a message 
        describing the problem."
    ::= 43

loggerLineAttackLogFullTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
--  Status
--    mandatory
    DESCRIPTION
        "Signifies that the agent entity has detected 
        the line-attack log file is full. In such case the 
        agent entity rolls to the next file."
    ::= 44

vasServerOpertionalStatusChangeTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
    VARIABLES {
        pmoduleIndex, vasServerIndex, vasServerId, 
        vasServerOperStatus }
--  Status
--    mandatory
    DESCRIPTION
        "Signifies that the agent entity has detected 
        that the vas server operational status has changed."
    ::= 45

pullRequestRetryFailedTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
    VARIABLES {
        pcubeSeEventGenericString1, pullRequestNumber }
--  Status
--    mandatory
    DESCRIPTION
        "Signifies that an unknown subscriber
        wasn't identified after a certain number of pull 
        requests. The value of pcubeSeEventGenericString1 is the
        subscriber id and the pullRequestNumber is the number of
        pull requests made on this sub."
    ::= 47

mplsVpnTotalHWMappingsThresholdExceededTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) pcube(5655) pcubeWorkgroup(4) }
    VARIABLES {
        mplsVpnCurrentHWMappings }
--  Status
--    mandatory
    DESCRIPTION
        "Sent when the value of mplsVpnCurrentHWMappings 
        exceeds the allowed threshold."
    ::= 48

pcubeSystemGroup OBJECT IDENTIFIER ::= { pcubeSeGroups 1 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    System related inforamation.
--  objects
--    sysOperationalStatus, sysFailureRecovery, sysVersion

pcubeChassisGroup OBJECT IDENTIFIER ::= { pcubeSeGroups 2 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    Chassis related information.
--  objects
--    pchassisSysType, pchassisPowerSupplyAlarm, pchassisFansAlarm, 
--    pchassisTempAlarm, pchassisVoltageAlarm, pchassisNumSlots, 
--    pchassisSlotConfig, pchassisPsuType, pchassisLineFeedAlarm

pcuebModuleGroup OBJECT IDENTIFIER ::= { pcubeSeGroups 3 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    Module related information.
--  objects
--    pmoduleIndex, pmoduleType, pmoduleNumTrafficProcessors, 
--    pmoduleSlotNum, pmoduleHwVersion, pmoduleNumPorts, 
--    pmoduleNumLinks, pmoduleConnectionMode, pmoduleSerialNumber, 
--    pmoduleUpStreamAttackFilteringTime, 
--    pmoduleUpStreamLastAttackFilteringTime, 
--    pmoduleDownStreamAttackFilteringTime, 
--    pmoduleDownStreamLastAttackFilteringTime, 
--    pmoduleAttackObjectsClearTime, pmoduleAdminStatus, 
--    pmoduleOperStatus

pcubeLinkGroup OBJECT IDENTIFIER ::= { pcubeSeGroups 4 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    Link related information.
--  objects
--    linkModuleIndex, linkIndex, linkAdminModeOnActive, 
--    linkAdminModeOnFailure, linkOperMode, 
--    linkStatusReflectionEnable, linkSubscriberSidePortIndex, 
--    linkNetworkSidePortIndex

pcubeDiskGroup OBJECT IDENTIFIER ::= { pcubeSeGroups 5 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    Disk related information.
--  objects
--    diskNumUsedBytes, diskNumFreeBytes

pcubeRdrFormatterGroup OBJECT IDENTIFIER ::= { pcubeSeGroups 6 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    RDR-Formatter related information.
--  objects
--    rdrFormatterEnable, rdrFormatterDestIPAddr, 
--    rdrFormatterDestPort, rdrFormatterDestPriority, 
--    rdrFormatterDestStatus, rdrFormatterDestConnectionStatus, 
--    rdrFormatterDestNumReportsSent, 
--    rdrFormatterDestNumReportsDiscarded, 
--    rdrFormatterDestReportRate, rdrFormatterDestReportRatePeak, 
--    rdrFormatterDestReportRatePeakTime, 
--    rdrFormatterNumReportsSent, rdrFormatterNumReportsDiscarded, 
--    rdrFormatterClearCountersTime, rdrFormatterReportRate, 
--    rdrFormatterReportRatePeak, rdrFormatterReportRatePeakTime, 
--    rdrFormatterProtocol, rdrFormatterForwardingMode, 
--    rdrFormatterCategoryDestPriority, 
--    rdrFormatterCategoryDestStatus, rdrFormatterCategoryIndex, 
--    rdrFormatterCategoryName, rdrFormatterCategoryNumReportsSent, 
--    rdrFormatterCategoryNumReportsDiscarded, 
--    rdrFormatterCategoryReportRate, 
--    rdrFormatterCategoryReportRatePeak, 
--    rdrFormatterCategoryReportRatePeakTime, 
--    rdrFormatterCategoryNumReportsQueued

pcubeLoggerGroup OBJECT IDENTIFIER ::= { pcubeSeGroups 7 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    Logger related information.
--  objects
--    loggerUserLogEnable, loggerUserLogNumInfo, 
--    loggerUserLogNumWarning, loggerUserLogNumError, 
--    loggerUserLogNumFatal, loggerUserLogClearCountersTime

pcubeSubscribersGroup OBJECT IDENTIFIER ::= { pcubeSeGroups 8 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    Subscriber related information.
--  objects
--    subscribersNumIntroduced, subscribersNumFree, 
--    subscribersNumIpAddrMappings, 
--    subscribersNumIpAddrMappingsFree, 
--    subscribersNumIpRangeMappings, 
--    subscribersNumIpRangeMappingsFree, subscribersNumVlanMappings, 
--    subscribersNumVlanMappingsFree, subscribersNumActive, 
--    subscribersNumActivePeak, subscribersNumActivePeakTime, 
--    subscribersNumUpdates, subscribersCountersClearTime, 
--    subscribersNumTpIpRanges, subscribersNumTpIpRangesFree, 
--    subscribersNumAnonymous, subscribersNumWithSessions, spIndex, 
--    spName, spType, spvSubName, spvPropertyName, spvRowStatus, 
--    spvPropertyStringValue, spvPropertyUintValue, 
--    spvPropertyCounter64Value

pcubeTrafficProcessorGroup OBJECT IDENTIFIER ::= { pcubeSeGroups 9 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    Traffic processors related information.
--  objects
--    tpModuleIndex, tpIndex, tpTotalNumHandledPackets, 
--    tpTotalNumHandledFlows, tpNumActiveFlows, 
--    tpNumActiveFlowsPeak, tpNumActiveFlowsPeakTime, 
--    tpNumTcpActiveFlows, tpNumTcpActiveFlowsPeak, 
--    tpNumTcpActiveFlowsPeakTime, tpNumUdpActiveFlows, 
--    tpNumUdpActiveFlowsPeak, tpNumUdpActiveFlowsPeakTime, 
--    tpNumNonTcpUdpActiveFlows, tpNumNonTcpUdpActiveFlowsPeak, 
--    tpNumNonTcpUdpActiveFlowsPeakTime, tpTotalNumBlockedPackets, 
--    tpTotalNumBlockedFlows, 
--    tpTotalNumDiscardedPacketsDueToBwLimit, 
--    tpTotalNumWredDiscardedPackets, tpTotalNumFragments, 
--    tpTotalNumNonIpPackets, tpTotalNumIpCrcErrPackets, 
--    tpTotalNumIpLengthErrPackets, tpTotalNumIpBroadcastPackets, 
--    tpTotalNumTtlErrPackets, tpTotalNumTcpUdpCrcErrPackets, 
--    tpClearCountersTime, tpHandledPacketsRate, 
--    tpHandledPacketsRatePeak, tpHandledPacketsRatePeakTime, 
--    tpHandledFlowsRate, tpHandledFlowsRatePeak, 
--    tpHandledFlowsRatePeakTime, tpCpuUtilization, 
--    tpCpuUtilizationPeak, tpCpuUtilizationPeakTime, 
--    tpFlowsCapacityUtilization, tpFlowsCapacityUtilizationPeak, 
--    tpFlowsCapacityUtilizationPeakTime, tpServiceLoss

pcubePortGroup OBJECT IDENTIFIER ::= { pcubeSeGroups 10 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    Ports related information.
--  objects
--    pportModuleIndex, pportIndex, pportType, pportNumTxQueues, 
--    pportIfIndex, pportAdminSpeed, pportAdminDuplex, 
--    pportOperDuplex, pportLinkIndex, pportOperStatus

pcubeTxQueuesGroup OBJECT IDENTIFIER ::= { pcubeSeGroups 11 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    Tx queue related information
--  objects
--    txQueuesModuleIndex, txQueuesPortIndex, txQueuesQueueIndex, 
--    txQueuesDescription, txQueuesBandwidth, txQueuesUtilization, 
--    txQueuesUtilizationPeak, txQueuesUtilizationPeakTime, 
--    txQueuesClearCountersTime, txQueuesDroppedBytes

pcubeGlobalControllersGroup OBJECT IDENTIFIER ::= { pcubeSeGroups 12 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    Global controllers related information.
--  objects
--    globalControllersModuleIndex, globalControllersPortIndex, 
--    globalControllersIndex, globalControllersDescription, 
--    globalControllersBandwidth, globalControllersUtilization, 
--    globalControllersUtilizationPeak, 
--    globalControllersUtilizationPeakTime, 
--    globalControllersClearCountersTime, 
--    globalControllersDroppedBytes

pcubeApplicationGroup OBJECT IDENTIFIER ::= { pcubeSeGroups 13 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    Application related information.
--  objects
--    appName, appDescription, appVersion, apIndex, apName, apType, 
--    apvPropertyName, apvRowStatus, apvPropertyStringValue, 
--    apvPropertyUintValue, apvPropertyCounter64Value

pcubeTrafficCountersGroup OBJECT IDENTIFIER ::= { pcubeSeGroups 14 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    Traffic counter related information.
--  objects
--    trafficCounterIndex, trafficCounterValue, trafficCounterName, 
--    trafficCounterType

pcubeAttackGroup OBJECT IDENTIFIER ::= { pcubeSeGroups 15 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    Attacks related information.
--  objects
--    attackTypeIndex, attackTypeName, attackTypeCurrentNumAttacks, 
--    attackTypeTotalNumAttacks, attackTypeTotalNumFlows, 
--    attackTypeTotalNumSeconds

pcubeVasTrafficForwardingGroup OBJECT IDENTIFIER ::= { pcubeSeGroups 16 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    VAS traffic forwarding related
--    information.
--  objects
--    vasServerIndex, vasServerId, vasServerAdminStatus, 
--    vasServerOperStatus

pcubeMplsVpnAutoLearnGroup OBJECT IDENTIFIER ::= { pcubeSeGroups 17 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    MPLS VPN auto learning related
--    information.
--  objects
--    mplsVpnMaxHWMappings, mplsVpnCurrentHWMappings

pcubeTrapObjectsGroup OBJECT IDENTIFIER ::= { pcubeSeGroups 18 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    Notifications' objects group.
--  objects
--    pcubeSeEventGenericString1, pcubeSeEventGenericString2, 
--    pullRequestNumber

pcubeSeEventsGroup OBJECT IDENTIFIER ::= { pcubeSeConformance 3 }
-- NOTIFICATION-GROUP
--  Status
--    deprecated
--  Descr
--    Pcube notifications. Contains deprecated objects.
--  notifications
--    operationalStatusOperationalTrap, 
--    operationalStatusWarningTrap, operationalStatusFailureTrap, 
--    systemResetTrap, chassisTempAlarmOnTrap, 
--    chassisTempAlarmOffTrap, chassisVoltageAlarmOnTrap, 
--    chassisFansAlarmOnTrap, chassisPowerSupplyAlarmOnTrap, 
--    rdrActiveConnectionTrap, rdrNoActiveConnectionTrap, 
--    rdrConnectionUpTrap, rdrConnectionDownTrap, 
--    telnetSessionStartedTrap, telnetSessionEndedTrap, 
--    telnetSessionDeniedAccessTrap, telnetSessionBadLoginTrap, 
--    loggerUserLogIsFullTrap, sntpClockDriftWarnTrap, 
--    linkModeBypassTrap, linkModeForwardingTrap, 
--    linkModeCutoffTrap, moduleAttackFilterActivatedTrap, 
--    moduleAttackFilterDeactivatedTrap, moduleEmAgentGenericTrap, 
--    linkModeSniffingTrap, moduleRedundancyReadyTrap, 
--    moduleRedundantConfigurationMismatchTrap, 
--    moduleLostRedundancyTrap, moduleSmConnectionDownTrap, 
--    moduleSmConnectionUpTrap, moduleOperStatusChangeTrap, 
--    portOperStatusChangeTrap, chassisLineFeedAlarmOnTrap, 
--    rdrFormatterCategoryDiscardingReportsTrap, 
--    rdrFormatterCategoryStoppedDiscardingReportsTrap, 
--    sessionStartedTrap, sessionEndedTrap, sessionDeniedAccessTrap, 
--    sessionBadLoginTrap, illegalSubscriberMappingTrap, 
--    loggerLineAttackLogFullTrap, 
--    vasServerOpertionalStatusChangeTrap, 
--    pullRequestRetryFailedTrap, 
--    mplsVpnTotalHWMappingsThresholdExceededTrap

pcubeSeEventsGroupRev1 OBJECT IDENTIFIER ::= { pcubeSeConformance 4 }
-- NOTIFICATION-GROUP
--  Status
--    mandatory
--  Descr
--    Pcube notifications.
--  notifications
--    operationalStatusOperationalTrap, 
--    operationalStatusWarningTrap, operationalStatusFailureTrap, 
--    systemResetTrap, chassisTempAlarmOnTrap, 
--    chassisTempAlarmOffTrap, chassisVoltageAlarmOnTrap, 
--    chassisFansAlarmOnTrap, chassisPowerSupplyAlarmOnTrap, 
--    rdrActiveConnectionTrap, rdrNoActiveConnectionTrap, 
--    rdrConnectionUpTrap, rdrConnectionDownTrap, 
--    loggerUserLogIsFullTrap, sntpClockDriftWarnTrap, 
--    linkModeBypassTrap, linkModeForwardingTrap, 
--    linkModeCutoffTrap, moduleAttackFilterActivatedTrap, 
--    moduleAttackFilterDeactivatedTrap, moduleEmAgentGenericTrap, 
--    linkModeSniffingTrap, moduleRedundancyReadyTrap, 
--    moduleRedundantConfigurationMismatchTrap, 
--    moduleLostRedundancyTrap, moduleSmConnectionDownTrap, 
--    moduleSmConnectionUpTrap, moduleOperStatusChangeTrap, 
--    portOperStatusChangeTrap, chassisLineFeedAlarmOnTrap, 
--    rdrFormatterCategoryDiscardingReportsTrap, 
--    rdrFormatterCategoryStoppedDiscardingReportsTrap, 
--    sessionStartedTrap, sessionEndedTrap, sessionDeniedAccessTrap, 
--    sessionBadLoginTrap, illegalSubscriberMappingTrap, 
--    loggerLineAttackLogFullTrap, 
--    vasServerOpertionalStatusChangeTrap, 
--    pullRequestRetryFailedTrap, 
--    mplsVpnTotalHWMappingsThresholdExceededTrap

pcubeCompliance OBJECT IDENTIFIER ::= { pcubeSeCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    deprecated
--  Descr
--    A compliance statement defined in this MIB module,
--    for SCE SNMP agents. with old deprectated groups.
--    This compliance includes deprecated groups.
--  Module
--    >>current<<
--   MandGroup
--    pcubeSystemGroup
--   MandGroup
--    pcubeChassisGroup
--   MandGroup
--    pcuebModuleGroup
--   MandGroup
--    pcubeLinkGroup
--   MandGroup
--    pcubeDiskGroup
--   MandGroup
--    pcubeRdrFormatterGroup
--   MandGroup
--    pcubeLoggerGroup
--   MandGroup
--    pcubeSubscribersGroup
--   MandGroup
--    pcubeTrafficProcessorGroup
--   MandGroup
--    pcubePortGroup
--   MandGroup
--    pcubeTxQueuesGroup
--   MandGroup
--    pcubeGlobalControllersGroup
--   MandGroup
--    pcubeApplicationGroup
--   MandGroup
--    pcubeTrafficCountersGroup
--   MandGroup
--    pcubeAttackGroup
--   MandGroup
--    pcubeVasTrafficForwardingGroup
--   MandGroup
--    pcubeTrapObjectsGroup
--   MandGroup
--    pcubeMplsVpnAutoLearnGroup
--   MandGroup
--    pcubeSeEventsGroup

pcubeComplianceRev1 OBJECT IDENTIFIER ::= { pcubeSeCompliances 2 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    A compliance statement defined in this MIB module,
--    for SCE SNMP agents.
--  Module
--    >>current<<
--   MandGroup
--    pcubeSystemGroup
--   MandGroup
--    pcubeChassisGroup
--   MandGroup
--    pcuebModuleGroup
--   MandGroup
--    pcubeLinkGroup
--   MandGroup
--    pcubeDiskGroup
--   MandGroup
--    pcubeRdrFormatterGroup
--   MandGroup
--    pcubeLoggerGroup
--   MandGroup
--    pcubeSubscribersGroup
--   MandGroup
--    pcubeTrafficProcessorGroup
--   MandGroup
--    pcubePortGroup
--   MandGroup
--    pcubeTxQueuesGroup
--   MandGroup
--    pcubeGlobalControllersGroup
--   MandGroup
--    pcubeApplicationGroup
--   MandGroup
--    pcubeTrafficCountersGroup
--   MandGroup
--    pcubeAttackGroup
--   MandGroup
--    pcubeVasTrafficForwardingGroup
--   MandGroup
--    pcubeTrapObjectsGroup
--   MandGroup
--    pcubeMplsVpnAutoLearnGroup
--   MandGroup
--    pcubeSeEventsGroupRev1


END