-- MIB file created 17-Jan-2006 16:51:02, by -- SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com TN3270E-RT-MIB DEFINITIONS ::= BEGIN -- From file: "TN3270E-RT-MIB.my" -- Compile options "4 7 F H N O W 03 06 0B 0G 0N 0T" IMPORTS RowStatus, DateAndTime, TimeStamp, TestAndIncr FROM SNMPv2-TC-v1 tn3270eSrvrConfIndex, tn3270eClientGroupName, tn3270eResMapElementType FROM TN3270E-MIB IANATn3270eAddrType, IANATn3270eAddress FROM IANATn3270eTC-MIB snanauMIB FROM SNA-NAU-MIB Counter, Gauge FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215; tn3270eRtMIB OBJECT IDENTIFIER ::= { snanauMIB 9 } -- MODULE-IDENTITY -- LastUpdated -- 200601130000Z -- OrgName -- TN3270E Working Group -- ContactInfo -- Kenneth White (kennethw@vnet.ibm.com) -- IBM Corp. - Dept. BRQA/Bldg. 501/G114 -- P.O. Box 12195 -- 3039 Cornwallis -- RTP, NC 27709-2195 -- -- Robert Moore (remoore@us.ibm.com) -- IBM Corp. - Dept. BRQA/Bldg. 501/G114 -- P.O. Box 12195 -- 3039 Cornwallis -- RTP, NC 27709-2195 -- (919) 254-4436 -- Descr -- This module defines a portion of the management -- information base (MIB) that enables monitoring of -- TN3270 and TN3270E clients' response times by a -- TN3270E server. -- RevDate -- 200601130000Z -- RevDescr -- Removed the IMPORTing of Unsigned32 from CISCO-TC, -- by changing it back to be IMPORTed from SNMPv2-SMI -- (as in RFC 2562). -- RevDate -- 9807270000Z -- RevDescr -- Initial version, published as RFC 2562. tn3270eRtNotifications OBJECT IDENTIFIER ::= { tn3270eRtMIB 0 } tn3270eRtObjects OBJECT IDENTIFIER ::= { tn3270eRtMIB 1 } tn3270eRtConformance OBJECT IDENTIFIER ::= { tn3270eRtMIB 3 } tn3270eRtGroups OBJECT IDENTIFIER ::= { tn3270eRtConformance 1 } tn3270eRtCompliances OBJECT IDENTIFIER ::= { tn3270eRtConformance 2 } tn3270eRtCollCtlTable OBJECT-TYPE SYNTAX SEQUENCE OF Tn3270eRtCollCtlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The response time monitoring collection control table, which allows a management application to control the types of response time data being collected, and the clients for which it is being collected. This table is indexed by tn3270eSrvrConfIndex and tn3270eClientGroupName imported from the TN3270E-MIB. tn3270eSrvrConfIndex indicates within a host which TN3270E server an entry applies to. tn3270eClientGroupName it identifies the set of IP clients for which response time data is being collected. The particular IP clients making up the set are identified in the tn3270eClientGroupTable in the TN3270E-MIB." ::= { tn3270eRtObjects 1 } tn3270eRtCollCtlEntry OBJECT-TYPE SYNTAX Tn3270eRtCollCtlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the TN3270E response time monitoring collection control table. To handle the case of multiple TN3270E servers on the same host, the first index of this table is the tn3270eSrvrConfIndex from the TN3270E-MIB." INDEX { tn3270eSrvrConfIndex, tn3270eClientGroupName } ::= { tn3270eRtCollCtlTable 1 } Tn3270eRtCollCtlEntry ::= SEQUENCE { tn3270eRtCollCtlType OCTET STRING, tn3270eRtCollCtlSPeriod Gauge, tn3270eRtCollCtlSPMult Gauge, tn3270eRtCollCtlThreshHigh Gauge, tn3270eRtCollCtlThreshLow Gauge, tn3270eRtCollCtlIdleCount Gauge, tn3270eRtCollCtlBucketBndry1 Gauge, tn3270eRtCollCtlBucketBndry2 Gauge, tn3270eRtCollCtlBucketBndry3 Gauge, tn3270eRtCollCtlBucketBndry4 Gauge, tn3270eRtCollCtlRowStatus RowStatus } tn3270eRtCollCtlType OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1)) ACCESS read-write STATUS mandatory DESCRIPTION "This object controls what types of response time data to collect, whether to summarize the data across the members of a client group or keep it individually, whether to introduce dynamic definite responses, and whether to generate traps. aggregate(0) - Aggregate response time data for the client group as a whole. If this bit is set to 0, then maintain response time data separately for each member of the client group. excludeIpComponent(1) - Do not include the IP-network component in any response times. ddr(2) - Enable dynamic definite response. average(3) - Produce an average response time based on a specified collection interval. buckets(4) - Maintain tn3270eRtDataBucket values in a corresponding tn3270eRtDataEntry, based on the bucket boundaries specified in the tn3270eRtCollCtlBucketBndry objects . traps(5) - generate the notifications specified in this MIB module. The tn3270eRtExceeded and tn3270eRtOkay notifications are generated only if average(3) is also specified." ::= { tn3270eRtCollCtlEntry 2 } tn3270eRtCollCtlSPeriod OBJECT-TYPE SYNTAX Gauge(15..86400) -- Units -- seconds ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds that defines the sample period. The actual interval is defined as tn3270eRtCollCtlSPeriod times tn3270eRtCollCtlSPMult. The value of this object is used only if the corresponding tn3270eRtCollCtlType has the average(3) setting." DEFVAL { 20 } ::= { tn3270eRtCollCtlEntry 3 } tn3270eRtCollCtlSPMult OBJECT-TYPE SYNTAX Gauge(1..5760) -- Units -- period ACCESS read-write STATUS mandatory DESCRIPTION "The sample period multiplier; this value is multiplied by the sample period, tn3270eRtCollCtlSPeriod, to determine the collection interval. Sliding-window average calculation can, if necessary, be disabled, by setting the sample period multiplier, tn3270eRtCollCtlSPMult, to 1, and setting the sample period, tn3270eRtCollCtlSPeriod, to the required collection interval. The value of this object is used only if the corresponding tn3270eRtCollCtlType has the average(3) setting." DEFVAL { 30 } ::= { tn3270eRtCollCtlEntry 4 } tn3270eRtCollCtlThreshHigh OBJECT-TYPE SYNTAX Gauge -- Units -- seconds ACCESS read-write STATUS mandatory DESCRIPTION "The threshold for generating a tn3270eRtExceeded notification, signalling that a monitored total response time has exceeded the specified limit. A value of zero for this object suppresses generation of this notification. The value of this object is used only if the corresponding tn3270eRtCollCtlType has average(3) and traps(5) selected. A tn3270eRtExceeded notification is not generated again for a tn3270eRtDataEntry until an average response time falling below the low threshold tn3270eRtCollCtlThreshLow specified for the client group has occurred for the entry." DEFVAL { 0 } ::= { tn3270eRtCollCtlEntry 5 } tn3270eRtCollCtlThreshLow OBJECT-TYPE SYNTAX Gauge -- Units -- seconds ACCESS read-write STATUS mandatory DESCRIPTION "The threshold for generating a tn3270eRtOkay notification, signalling that a monitored total response time has fallen below the specified limit. A value of zero for this object suppresses generation of this notification. The value of this object is used only if the corresponding tn3270eRtCollCtlType has average(3) and traps(5) selected. A tn3270eRtOkay notification is not generated again for a tn3270eRtDataEntry until an average response time exceeding the high threshold tn3270eRtCollCtlThreshHigh specified for the client group has occurred for the entry." DEFVAL { 0 } ::= { tn3270eRtCollCtlEntry 6 } tn3270eRtCollCtlIdleCount OBJECT-TYPE SYNTAX Gauge -- Units -- transactions ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is used to determine whether a sample that yields an average response time exceeding the value of tn3270eRtCollCtlThreshHigh was a statistically valid one. If the following statement is true, then the sample was statistically valid, and so a tn3270eRtExceeded notification should be generated: AvgCountTrans * ((AvgRt/ThreshHigh - 1) ** 2) >= IdleCount This comparison is done only if the corresponding tn3270eRtCollCtlType has average(3) and traps(5) selected." DEFVAL { 1 } ::= { tn3270eRtCollCtlEntry 7 } tn3270eRtCollCtlBucketBndry1 OBJECT-TYPE SYNTAX Gauge -- Units -- tenths of seconds ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object defines the range of transaction response times counted in the Tn3270eRtDataBucket1Rts object: those less than or equal to this value." DEFVAL { 10 } ::= { tn3270eRtCollCtlEntry 8 } tn3270eRtCollCtlBucketBndry2 OBJECT-TYPE SYNTAX Gauge -- Units -- tenths of seconds ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object, together with that of the tn3270eRtCollCtlBucketBndry1 object, defines the range of transaction response times counted in the Tn3270eRtDataBucket2Rts object: those greater than the value of the tn3270eRtCollCtlBucketBndry1 object, and less than or equal to the value of this object." DEFVAL { 20 } ::= { tn3270eRtCollCtlEntry 9 } tn3270eRtCollCtlBucketBndry3 OBJECT-TYPE SYNTAX Gauge -- Units -- tenths of seconds ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object, together with that of the tn3270eRtCollCtlBucketBndry2 object, defines the range of transaction response times counted in the Tn3270eRtDataBucket3Rts object: those greater than the value of the tn3270eRtCollCtlBucketBndry2 object, and less than or equal to the value of this object." DEFVAL { 50 } ::= { tn3270eRtCollCtlEntry 10 } tn3270eRtCollCtlBucketBndry4 OBJECT-TYPE SYNTAX Gauge -- Units -- tenths of seconds ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object, together with that of the tn3270eRtCollCtlBucketBndry3 object, defines the range of transaction response times counted in the Tn3270eRtDataBucket4Rts object: those greater than the value of the tn3270eRtCollCtlBucketBndry3 object, and less than or equal to the value of this object. The value of this object also defines the range of transaction response times counted in the Tn3270eRtDataBucket5Rts object: those greater than the value of this object." DEFVAL { 100 } ::= { tn3270eRtCollCtlEntry 11 } tn3270eRtCollCtlRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object allows entries to be created and deleted in the tn3270eRtCollCtlTable. An entry in this table is deleted by setting this object to destroy(6). Deleting an entry in this table has the side-effect of removing all entries from the tn3270eRtDataTable that are associated with the entry being deleted." ::= { tn3270eRtCollCtlEntry 12 } tn3270eRtDataTable OBJECT-TYPE SYNTAX SEQUENCE OF Tn3270eRtDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The response time data table. Entries in this table are created based on entries in the tn3270eRtCollCtlTable." ::= { tn3270eRtObjects 2 } tn3270eRtDataEntry OBJECT-TYPE SYNTAX Tn3270eRtDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entries in this table are created based upon the tn3270eRtCollCtlTable. When the corresponding tn3270eRtCollCtlType has aggregate(0) specified, a single entry is created in this table, with a tn3270eRtDataClientAddrType of unknown(0), a zero-length octet string value for tn3270eRtDataClientAddress, and a tn3270eRtDataClientPort value of 0. When aggregate(0) is not specified, a separate entry is created for each client in the group. Note that the following objects defined within an entry in this table can wrap: tn3270eRtDataTotalRts tn3270eRtDataTotalIpRts tn3270eRtDataCountTrans tn3270eRtDataCountDrs tn3270eRtDataElapsRnTrpSq tn3270eRtDataElapsIpRtSq tn3270eRtDataBucket1Rts tn3270eRtDataBucket2Rts tn3270eRtDataBucket3Rts tn3270eRtDataBucket4Rts tn3270eRtDataBucket5Rts" INDEX { tn3270eSrvrConfIndex, tn3270eClientGroupName, tn3270eRtDataClientAddrType, tn3270eRtDataClientAddress, tn3270eRtDataClientPort } ::= { tn3270eRtDataTable 1 } Tn3270eRtDataEntry ::= SEQUENCE { tn3270eRtDataClientAddrType IANATn3270eAddrType, tn3270eRtDataClientAddress IANATn3270eAddress, tn3270eRtDataClientPort Gauge, tn3270eRtDataAvgRt Gauge, tn3270eRtDataAvgIpRt Gauge, tn3270eRtDataAvgCountTrans Gauge, tn3270eRtDataIntTimeStamp DateAndTime, tn3270eRtDataTotalRts Counter, tn3270eRtDataTotalIpRts Counter, tn3270eRtDataCountTrans Counter, tn3270eRtDataCountDrs Counter, tn3270eRtDataElapsRndTrpSq Gauge, tn3270eRtDataElapsIpRtSq Gauge, tn3270eRtDataBucket1Rts Counter, tn3270eRtDataBucket2Rts Counter, tn3270eRtDataBucket3Rts Counter, tn3270eRtDataBucket4Rts Counter, tn3270eRtDataBucket5Rts Counter, tn3270eRtDataRtMethod INTEGER, tn3270eRtDataDiscontinuityTime TimeStamp } tn3270eRtDataClientAddrType OBJECT-TYPE SYNTAX IANATn3270eAddrType -- Rsyntax INTEGER { -- ?? enum value of zero may cause problems -- unknown(0), -- ipv4(1), -- ipv6(2) -- } ACCESS not-accessible STATUS mandatory DESCRIPTION "Indicates the type of address represented by the value of tn3270eRtDataClientAddress. The value unknown(0) is used if aggregate data is being collected for the client group." ::= { tn3270eRtDataEntry 1 } tn3270eRtDataClientAddress OBJECT-TYPE SYNTAX IANATn3270eAddress -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS not-accessible STATUS mandatory DESCRIPTION "Contains the IP address of the TN3270 client being monitored. A zero-length octet string is used if aggregate data is being collected for the client group." ::= { tn3270eRtDataEntry 2 } tn3270eRtDataClientPort OBJECT-TYPE SYNTAX Gauge(0..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "Contains the client port number of the TN3270 client being monitored. The value 0 is used if aggregate data is being collected for the client group, or if the tn3270eRtDataClientAddrType identifies an address type that does not support ports." ::= { tn3270eRtDataEntry 3 } tn3270eRtDataAvgRt OBJECT-TYPE SYNTAX Gauge -- Units -- tenths of seconds ACCESS read-only STATUS mandatory DESCRIPTION "The average total response time measured over the last collection interval." DEFVAL { 0 } ::= { tn3270eRtDataEntry 4 } tn3270eRtDataAvgIpRt OBJECT-TYPE SYNTAX Gauge -- Units -- tenths of seconds ACCESS read-only STATUS mandatory DESCRIPTION "The average IP response time measured over the last collection interval." DEFVAL { 0 } ::= { tn3270eRtDataEntry 5 } tn3270eRtDataAvgCountTrans OBJECT-TYPE SYNTAX Gauge -- Units -- transactions ACCESS read-only STATUS mandatory DESCRIPTION "The sliding transaction count used for calculating the values of the tn3270eRtDataAvgRt and tn3270eRtDataAvgIpRt objects. The actual transaction count is available in the tn3270eRtDataCountTrans object. The initial value of this object, before any averages have been calculated, is 0." ::= { tn3270eRtDataEntry 6 } tn3270eRtDataIntTimeStamp OBJECT-TYPE SYNTAX DateAndTime -- Rsyntax OCTET STRING(SIZE(8|11)) ACCESS read-only STATUS mandatory DESCRIPTION "The date and time of the last interval that tn3270eRtDataAvgRt, tn3270eRtDataAvgIpRt, and tn3270eRtDataAvgCountTrans were calculated. Prior to the calculation of the first interval averages, this object returns the value 0x0000000000000000000000. When this value is returned, the remaining objects in the entry have no significance." ::= { tn3270eRtDataEntry 7 } tn3270eRtDataTotalRts OBJECT-TYPE SYNTAX Counter -- Units -- tenths of seconds ACCESS read-only STATUS mandatory DESCRIPTION "The count of the total response times collected. A management application can detect discontinuities in this counter by monitoring the tn3270eRtDataDiscontinuityTime object." ::= { tn3270eRtDataEntry 8 } tn3270eRtDataTotalIpRts OBJECT-TYPE SYNTAX Counter -- Units -- tenths of seconds ACCESS read-only STATUS mandatory DESCRIPTION "The count of the total IP-network response times collected. A management application can detect discontinuities in this counter by monitoring the tn3270eRtDataDiscontinuityTime object." ::= { tn3270eRtDataEntry 9 } tn3270eRtDataCountTrans OBJECT-TYPE SYNTAX Counter -- Units -- transactions ACCESS read-only STATUS mandatory DESCRIPTION "The count of the total number of transactions detected. A management application can detect discontinuities in this counter by monitoring the tn3270eRtDataDiscontinuityTime object." ::= { tn3270eRtDataEntry 10 } tn3270eRtDataCountDrs OBJECT-TYPE SYNTAX Counter -- Units -- definite responses ACCESS read-only STATUS mandatory DESCRIPTION "The count of the total number of definite responses detected. A management application can detect discontinuities in this counter by monitoring the tn3270eRtDataDiscontinuityTime object." ::= { tn3270eRtDataEntry 11 } tn3270eRtDataElapsRndTrpSq OBJECT-TYPE SYNTAX Gauge -- Units -- tenths of seconds squared ACCESS read-only STATUS mandatory DESCRIPTION "The sum of the elapsed round trip time squared. The sum of the squares is kept in order to enable calculation of a variance." DEFVAL { 0 } ::= { tn3270eRtDataEntry 12 } tn3270eRtDataElapsIpRtSq OBJECT-TYPE SYNTAX Gauge -- Units -- tenths of seconds squared ACCESS read-only STATUS mandatory DESCRIPTION "The sum of the elapsed IP round trip time squared. The sum of the squares is kept in order to enable calculation of a variance." DEFVAL { 0 } ::= { tn3270eRtDataEntry 13 } tn3270eRtDataBucket1Rts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of the response times falling into bucket 1. A management application can detect discontinuities in this counter by monitoring the tn3270eRtDataDiscontinuityTime object." ::= { tn3270eRtDataEntry 14 } tn3270eRtDataBucket2Rts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of the response times falling into bucket 2. A management application can detect discontinuities in this counter by monitoring the tn3270eRtDataDiscontinuityTime object." ::= { tn3270eRtDataEntry 15 } tn3270eRtDataBucket3Rts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of the response times falling into bucket 3. A management application can detect discontinuities in this counter by monitoring the tn3270eRtDataDiscontinuityTime object." ::= { tn3270eRtDataEntry 16 } tn3270eRtDataBucket4Rts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of the response times falling into bucket 4. A management application can detect discontinuities in this counter by monitoring the tn3270eRtDataDiscontinuityTime object." ::= { tn3270eRtDataEntry 17 } tn3270eRtDataBucket5Rts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of the response times falling into bucket 5. A management application can detect discontinuities in this counter by monitoring the tn3270eRtDataDiscontinuityTime object." ::= { tn3270eRtDataEntry 18 } tn3270eRtDataRtMethod OBJECT-TYPE SYNTAX INTEGER { --?? enum value of zero may cause problems none(0), responses(1), timingMark(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object indicates the method that was used in calculating the IP network time. The value 'none(0) indicates that response times were not calculated for the IP network." ::= { tn3270eRtDataEntry 19 } tn3270eRtDataDiscontinuityTime OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime on the most recent occasion at which one or more of this entry's counter objects suffered a discontinuity. This may happen if a TN3270E server is stopped and then restarted, and local methods are used to set up collection policy (tn3270eRtCollCtlTable entries)." ::= { tn3270eRtDataEntry 20 } tn3270eRtSpinLock OBJECT-TYPE SYNTAX TestAndIncr -- Rsyntax INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "An advisory lock used to allow cooperating TN3270E-RT-MIB applications to coordinate their use of the tn3270eRtCollCtlTable. When creating a new entry or altering an existing entry in the tn3270eRtCollCtlTable, an application should make use of tn3270eRtSpinLock to serialize application changes or additions. Since this is an advisory lock, the use of this lock is not enforced." ::= { tn3270eRtObjects 3 } tn3270eRtExceeded TRAP-TYPE -- Reverse mappable trap ENTERPRISE tn3270eRtMIB VARIABLES { tn3270eRtDataIntTimeStamp, tn3270eRtDataAvgRt, tn3270eRtDataAvgIpRt, tn3270eRtDataAvgCountTrans, tn3270eRtDataRtMethod } -- Status -- mandatory DESCRIPTION "This notification is generated when the average response time, tn3270eRtDataAvgRt, exceeds tn3270eRtCollCtlThresholdHigh at the end of a collection interval specified by tn3270eCollCtlSPeriod times tn3270eCollCtlSPMult. Note that the corresponding tn3270eCollCtlType must have traps(5) and average(3) set for this notification to be generated. In addition, tn3270eRtDataAvgCountTrans, tn3270eRtCollCtlThreshHigh, and tn3270eRtDataAvgRt are algorithmically compared to tn3270eRtCollCtlIdleCount for determination if this notification will be suppressed." ::= 1 tn3270eRtOkay TRAP-TYPE -- Reverse mappable trap ENTERPRISE tn3270eRtMIB VARIABLES { tn3270eRtDataIntTimeStamp, tn3270eRtDataAvgRt, tn3270eRtDataAvgIpRt, tn3270eRtDataAvgCountTrans, tn3270eRtDataRtMethod } -- Status -- mandatory DESCRIPTION "This notification is generated when the average response time, tn3270eRtDataAvgRt, falls below tn3270eRtCollCtlThresholdLow at the end of a collection interval specified by tn3270eCollCtlSPeriod times tn3270eCollCtlSPMult, after a tn3270eRtExceeded notification was generated. Note that the corresponding tn3270eCollCtlType must have traps(5) and average(3) set for this notification to be generated." ::= 2 tn3270eRtCollStart TRAP-TYPE -- Reverse mappable trap ENTERPRISE tn3270eRtMIB VARIABLES { tn3270eRtDataRtMethod, tn3270eResMapElementType } -- Status -- mandatory DESCRIPTION "This notification is generated when response time data collection is enabled for a member of a client group. In order for this notification to occur the corresponding tn3270eRtCollCtlType must have traps(5) selected. tn3270eResMapElementType contains a valid value only if tn3270eRtDataClientAddress contains a valid address (rather than a zero-length octet string)." ::= 3 tn3270eRtCollEnd TRAP-TYPE -- Reverse mappable trap ENTERPRISE tn3270eRtMIB VARIABLES { tn3270eRtDataDiscontinuityTime, tn3270eRtDataAvgRt, tn3270eRtDataAvgIpRt, tn3270eRtDataAvgCountTrans, tn3270eRtDataIntTimeStamp, tn3270eRtDataTotalRts, tn3270eRtDataTotalIpRts, tn3270eRtDataCountTrans, tn3270eRtDataCountDrs, tn3270eRtDataElapsRndTrpSq, tn3270eRtDataElapsIpRtSq, tn3270eRtDataBucket1Rts, tn3270eRtDataBucket2Rts, tn3270eRtDataBucket3Rts, tn3270eRtDataBucket4Rts, tn3270eRtDataBucket5Rts, tn3270eRtDataRtMethod } -- Status -- mandatory DESCRIPTION "This notification is generated when an tn3270eRtDataEntry is deleted after being active (actual data collected), in order to enable a management application monitoring an tn3270eRtDataEntry to get the entry's final values. Note that the corresponding tn3270eCollCtlType must have traps(5) set for this notification to be generated." ::= 4 tn3270eRtGroup OBJECT IDENTIFIER ::= { tn3270eRtGroups 1 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- This group is mandatory for all implementations that -- support the TN3270E-RT-MIB. -- objects -- tn3270eRtCollCtlType, tn3270eRtCollCtlSPeriod, -- tn3270eRtCollCtlSPMult, tn3270eRtCollCtlThreshHigh, -- tn3270eRtCollCtlThreshLow, tn3270eRtCollCtlIdleCount, -- tn3270eRtCollCtlBucketBndry1, tn3270eRtCollCtlBucketBndry2, -- tn3270eRtCollCtlBucketBndry3, tn3270eRtCollCtlBucketBndry4, -- tn3270eRtCollCtlRowStatus, tn3270eRtDataDiscontinuityTime, -- tn3270eRtDataAvgRt, tn3270eRtDataAvgIpRt, -- tn3270eRtDataAvgCountTrans, tn3270eRtDataIntTimeStamp, -- tn3270eRtDataTotalRts, tn3270eRtDataTotalIpRts, -- tn3270eRtDataCountTrans, tn3270eRtDataCountDrs, -- tn3270eRtDataElapsRndTrpSq, tn3270eRtDataElapsIpRtSq, -- tn3270eRtDataBucket1Rts, tn3270eRtDataBucket2Rts, -- tn3270eRtDataBucket3Rts, tn3270eRtDataBucket4Rts, -- tn3270eRtDataBucket5Rts, tn3270eRtDataRtMethod, -- tn3270eRtSpinLock tn3270eRtNotGroup OBJECT IDENTIFIER ::= { tn3270eRtGroups 2 } -- NOTIFICATION-GROUP -- Status -- mandatory -- Descr -- The notifications that must be supported when the -- TN3270E-RT-MIB is implemented. -- notifications -- tn3270eRtExceeded, tn3270eRtOkay, tn3270eRtCollStart, -- tn3270eRtCollEnd tn3270eRtCompliance OBJECT IDENTIFIER ::= { tn3270eRtCompliances 1 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- The compliance statement for agents that support the -- TN327E-RT-MIB. -- Module -- >>current<< -- MandGroup -- tn3270eRtGroup -- MandGroup -- tn3270eRtNotGroup -- ObjVar -- tn3270eRtCollCtlType -- ObjVar -- tn3270eRtCollCtlSPeriod -- ObjVar -- tn3270eRtCollCtlSPMult -- ObjVar -- tn3270eRtCollCtlThreshHigh -- ObjVar -- tn3270eRtCollCtlThreshLow -- ObjVar -- tn3270eRtCollCtlIdleCount -- ObjVar -- tn3270eRtCollCtlBucketBndry1 -- ObjVar -- tn3270eRtCollCtlBucketBndry2 -- ObjVar -- tn3270eRtCollCtlBucketBndry3 -- ObjVar -- tn3270eRtCollCtlBucketBndry4 -- ObjVar -- tn3270eRtCollCtlRowStatus END