-- *********************************************************************
-- CISCO-FIREPOWER-DIAG-MIB.my
-- 
-- MIB representation of the Cisco Firepower
-- DIAG management information model package
-- 
-- Created May 2024 by Charles Bullis
-- 
-- Copyright (c) 2005-2024 Cisco Systems, Inc. All rights reserved.
-- 
-- *********************************************************************

CISCO-FIREPOWER-DIAG-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    Counter32,
    Gauge32,
    TimeTicks,
    Counter64,
    Unsigned32
        FROM SNMPv2-SMI
    TEXTUAL-CONVENTION,
    RowPointer,
    DateAndTime,
    DisplayString,
    MacAddress,
    TimeInterval,
    TimeStamp,
    TruthValue
        FROM SNMPv2-TC
    SnmpAdminString
        FROM SNMP-FRAMEWORK-MIB
    InetAddressIPv4,
    InetAddressIPv6
        FROM INET-ADDRESS-MIB
    ciscoMgmt
        FROM CISCO-SMI
    CiscoNetworkAddress,
    Unsigned64,
    CiscoInetAddressMask,
    CiscoAlarmSeverity,
    TimeIntervalSec
        FROM CISCO-TC
    ciscoFirepowerMIBObjects,
    CfprManagedObjectId,
    CfprManagedObjectDn
        FROM CISCO-FIREPOWER-MIB
    CfprDiagAdminState,
    CfprDiagBladeTestType,
    CfprDiagFailureAction,
    CfprDiagNetworkTestType,
    CfprDiagSrvCtrlType,
    CfprDiagStatus,
    CfprDiagStatusIssues,
    CfprDiagSuccessAction,
    CfprDiagTestOrder,
    CfprNetworkSwitchId,
    CfprPolicyPolicyOwner
        FROM CISCO-FIREPOWER-TC-MIB;

cfprDiagObjects MODULE-IDENTITY
    LAST-UPDATED    "202405160000Z"
    ORGANIZATION    "Cisco Systems Inc."
    CONTACT-INFO
        "Cisco Systems
        Customer Service
        
        Postal: 170 W Tasman Drive
        San Jose, CA  95134
        USA
        
        Tel: +1 800 553-NETS
        
        E-mail: firepower-mibs@cisco.com"
    DESCRIPTION
        "MIB representation of the Cisco Firepower
        DIAG management information model package"
    ::= { ciscoFirepowerMIBObjects 16 }

cfprDiagBladeTestTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CfprDiagBladeTestEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco Firepower diag:BladeTest managed object table"
    ::= { cfprDiagObjects 1 }

cfprDiagBladeTestEntry OBJECT-TYPE
    SYNTAX           CfprDiagBladeTestEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cfprDiagBladeTestTable table."
    INDEX { cfprDiagBladeTestInstanceId }
    ::= { cfprDiagBladeTestTable 1 }

CfprDiagBladeTestEntry ::= SEQUENCE {
    cfprDiagBladeTestInstanceId                                      CfprManagedObjectId,
    cfprDiagBladeTestDn                                              CfprManagedObjectDn,
    cfprDiagBladeTestRn                                              SnmpAdminString,
    cfprDiagBladeTestLength                                          Gauge32,
    cfprDiagBladeTestOrder                                           CfprDiagTestOrder,
    cfprDiagBladeTestType                                            CfprDiagBladeTestType
}

cfprDiagBladeTestInstanceId OBJECT-TYPE
    SYNTAX       CfprManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cfprDiagBladeTestEntry 1 }

cfprDiagBladeTestDn OBJECT-TYPE
    SYNTAX       CfprManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:BladeTest:dn managed object property"
    ::= { cfprDiagBladeTestEntry 2 }

cfprDiagBladeTestRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:BladeTest:rn managed object property"
    ::= { cfprDiagBladeTestEntry 3 }

cfprDiagBladeTestLength OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:BladeTest:length managed object property"
    ::= { cfprDiagBladeTestEntry 4 }

cfprDiagBladeTestOrder OBJECT-TYPE
    SYNTAX       CfprDiagTestOrder
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:BladeTest:order managed object property"
    ::= { cfprDiagBladeTestEntry 5 }

cfprDiagBladeTestType OBJECT-TYPE
    SYNTAX       CfprDiagBladeTestType
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:BladeTest:type managed object property"
    ::= { cfprDiagBladeTestEntry 6 }

cfprDiagNetworkTestTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CfprDiagNetworkTestEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco Firepower diag:NetworkTest managed object table"
    ::= { cfprDiagObjects 2 }

cfprDiagNetworkTestEntry OBJECT-TYPE
    SYNTAX           CfprDiagNetworkTestEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cfprDiagNetworkTestTable table."
    INDEX { cfprDiagNetworkTestInstanceId }
    ::= { cfprDiagNetworkTestTable 1 }

CfprDiagNetworkTestEntry ::= SEQUENCE {
    cfprDiagNetworkTestInstanceId                                    CfprManagedObjectId,
    cfprDiagNetworkTestDn                                            CfprManagedObjectDn,
    cfprDiagNetworkTestRn                                            SnmpAdminString,
    cfprDiagNetworkTestLength                                        Gauge32,
    cfprDiagNetworkTestOrder                                         CfprDiagTestOrder,
    cfprDiagNetworkTestSwitchId                                      CfprNetworkSwitchId,
    cfprDiagNetworkTestType                                          CfprDiagNetworkTestType
}

cfprDiagNetworkTestInstanceId OBJECT-TYPE
    SYNTAX       CfprManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cfprDiagNetworkTestEntry 1 }

cfprDiagNetworkTestDn OBJECT-TYPE
    SYNTAX       CfprManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:NetworkTest:dn managed object property"
    ::= { cfprDiagNetworkTestEntry 2 }

cfprDiagNetworkTestRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:NetworkTest:rn managed object property"
    ::= { cfprDiagNetworkTestEntry 3 }

cfprDiagNetworkTestLength OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:NetworkTest:length managed object property"
    ::= { cfprDiagNetworkTestEntry 4 }

cfprDiagNetworkTestOrder OBJECT-TYPE
    SYNTAX       CfprDiagTestOrder
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:NetworkTest:order managed object property"
    ::= { cfprDiagNetworkTestEntry 5 }

cfprDiagNetworkTestSwitchId OBJECT-TYPE
    SYNTAX       CfprNetworkSwitchId
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:NetworkTest:switchId managed
        object property"
    ::= { cfprDiagNetworkTestEntry 6 }

cfprDiagNetworkTestType OBJECT-TYPE
    SYNTAX       CfprDiagNetworkTestType
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:NetworkTest:type managed object property"
    ::= { cfprDiagNetworkTestEntry 7 }

cfprDiagRsltTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CfprDiagRsltEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco Firepower diag:Rslt managed object table"
    ::= { cfprDiagObjects 3 }

cfprDiagRsltEntry OBJECT-TYPE
    SYNTAX           CfprDiagRsltEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cfprDiagRsltTable table."
    INDEX { cfprDiagRsltInstanceId }
    ::= { cfprDiagRsltTable 1 }

CfprDiagRsltEntry ::= SEQUENCE {
    cfprDiagRsltInstanceId                                           CfprManagedObjectId,
    cfprDiagRsltDn                                                   CfprManagedObjectDn,
    cfprDiagRsltRn                                                   SnmpAdminString,
    cfprDiagRsltDescr                                                SnmpAdminString,
    cfprDiagRsltEndTs                                                DateAndTime,
    cfprDiagRsltId                                                   Gauge32,
    cfprDiagRsltResult                                               Gauge32,
    cfprDiagRsltRsltStatus                                           CfprDiagStatus,
    cfprDiagRsltStartTs                                              DateAndTime
}

cfprDiagRsltInstanceId OBJECT-TYPE
    SYNTAX       CfprManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cfprDiagRsltEntry 1 }

cfprDiagRsltDn OBJECT-TYPE
    SYNTAX       CfprManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:Rslt:dn managed object property"
    ::= { cfprDiagRsltEntry 2 }

cfprDiagRsltRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:Rslt:rn managed object property"
    ::= { cfprDiagRsltEntry 3 }

cfprDiagRsltDescr OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:Rslt:descr managed object property"
    ::= { cfprDiagRsltEntry 4 }

cfprDiagRsltEndTs OBJECT-TYPE
    SYNTAX       DateAndTime
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:Rslt:endTs managed object property"
    ::= { cfprDiagRsltEntry 5 }

cfprDiagRsltId OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:Rslt:id managed object property"
    ::= { cfprDiagRsltEntry 6 }

cfprDiagRsltResult OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:Rslt:result managed object property"
    ::= { cfprDiagRsltEntry 7 }

cfprDiagRsltRsltStatus OBJECT-TYPE
    SYNTAX       CfprDiagStatus
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:Rslt:rsltStatus managed object property"
    ::= { cfprDiagRsltEntry 8 }

cfprDiagRsltStartTs OBJECT-TYPE
    SYNTAX       DateAndTime
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:Rslt:startTs managed object property"
    ::= { cfprDiagRsltEntry 9 }

cfprDiagRunPolicyTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CfprDiagRunPolicyEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco Firepower diag:RunPolicy managed object table"
    ::= { cfprDiagObjects 4 }

cfprDiagRunPolicyEntry OBJECT-TYPE
    SYNTAX           CfprDiagRunPolicyEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cfprDiagRunPolicyTable table."
    INDEX { cfprDiagRunPolicyInstanceId }
    ::= { cfprDiagRunPolicyTable 1 }

CfprDiagRunPolicyEntry ::= SEQUENCE {
    cfprDiagRunPolicyInstanceId                                      CfprManagedObjectId,
    cfprDiagRunPolicyDn                                              CfprManagedObjectDn,
    cfprDiagRunPolicyRn                                              SnmpAdminString,
    cfprDiagRunPolicyDescr                                           SnmpAdminString,
    cfprDiagRunPolicyFailureAction                                   CfprDiagFailureAction,
    cfprDiagRunPolicyIntId                                           SnmpAdminString,
    cfprDiagRunPolicyName                                            SnmpAdminString,
    cfprDiagRunPolicyPolicyLevel                                     Gauge32,
    cfprDiagRunPolicyPolicyOwner                                     CfprPolicyPolicyOwner,
    cfprDiagRunPolicySuccessAction                                   CfprDiagSuccessAction
}

cfprDiagRunPolicyInstanceId OBJECT-TYPE
    SYNTAX       CfprManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cfprDiagRunPolicyEntry 1 }

cfprDiagRunPolicyDn OBJECT-TYPE
    SYNTAX       CfprManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:RunPolicy:dn managed object property"
    ::= { cfprDiagRunPolicyEntry 2 }

cfprDiagRunPolicyRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:RunPolicy:rn managed object property"
    ::= { cfprDiagRunPolicyEntry 3 }

cfprDiagRunPolicyDescr OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:RunPolicy:descr managed object property"
    ::= { cfprDiagRunPolicyEntry 4 }

cfprDiagRunPolicyFailureAction OBJECT-TYPE
    SYNTAX       CfprDiagFailureAction
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:RunPolicy:failureAction managed
        object property"
    ::= { cfprDiagRunPolicyEntry 5 }

cfprDiagRunPolicyIntId OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:RunPolicy:intId managed object property"
    ::= { cfprDiagRunPolicyEntry 6 }

cfprDiagRunPolicyName OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:RunPolicy:name managed object property"
    ::= { cfprDiagRunPolicyEntry 7 }

cfprDiagRunPolicyPolicyLevel OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:RunPolicy:policyLevel managed
        object property"
    ::= { cfprDiagRunPolicyEntry 8 }

cfprDiagRunPolicyPolicyOwner OBJECT-TYPE
    SYNTAX       CfprPolicyPolicyOwner
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:RunPolicy:policyOwner managed
        object property"
    ::= { cfprDiagRunPolicyEntry 9 }

cfprDiagRunPolicySuccessAction OBJECT-TYPE
    SYNTAX       CfprDiagSuccessAction
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:RunPolicy:successAction managed
        object property"
    ::= { cfprDiagRunPolicyEntry 10 }

cfprDiagSrvCapProviderTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CfprDiagSrvCapProviderEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco Firepower diag:SrvCapProvider managed object table"
    ::= { cfprDiagObjects 5 }

cfprDiagSrvCapProviderEntry OBJECT-TYPE
    SYNTAX           CfprDiagSrvCapProviderEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cfprDiagSrvCapProviderTable table."
    INDEX { cfprDiagSrvCapProviderInstanceId }
    ::= { cfprDiagSrvCapProviderTable 1 }

CfprDiagSrvCapProviderEntry ::= SEQUENCE {
    cfprDiagSrvCapProviderInstanceId                                 CfprManagedObjectId,
    cfprDiagSrvCapProviderDn                                         CfprManagedObjectDn,
    cfprDiagSrvCapProviderRn                                         SnmpAdminString,
    cfprDiagSrvCapProviderDeleted                                    TruthValue,
    cfprDiagSrvCapProviderDeprecated                                 TruthValue,
    cfprDiagSrvCapProviderElementLoadFailures                        Gauge32,
    cfprDiagSrvCapProviderElementsLoaded                             Gauge32,
    cfprDiagSrvCapProviderGencount                                   Gauge32,
    cfprDiagSrvCapProviderLoadErrors                                 Gauge32,
    cfprDiagSrvCapProviderLoadWarnings                               Gauge32,
    cfprDiagSrvCapProviderMgmtPlaneVer                               SnmpAdminString,
    cfprDiagSrvCapProviderModel                                      SnmpAdminString,
    cfprDiagSrvCapProviderPromCardType                               Gauge32,
    cfprDiagSrvCapProviderRevision                                   SnmpAdminString,
    cfprDiagSrvCapProviderVendor                                     SnmpAdminString
}

cfprDiagSrvCapProviderInstanceId OBJECT-TYPE
    SYNTAX       CfprManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cfprDiagSrvCapProviderEntry 1 }

cfprDiagSrvCapProviderDn OBJECT-TYPE
    SYNTAX       CfprManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCapProvider:dn managed object property"
    ::= { cfprDiagSrvCapProviderEntry 2 }

cfprDiagSrvCapProviderRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCapProvider:rn managed object property"
    ::= { cfprDiagSrvCapProviderEntry 3 }

cfprDiagSrvCapProviderDeleted OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCapProvider:deleted managed
        object property"
    ::= { cfprDiagSrvCapProviderEntry 4 }

cfprDiagSrvCapProviderDeprecated OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCapProvider:deprecated
        managed object property"
    ::= { cfprDiagSrvCapProviderEntry 5 }

cfprDiagSrvCapProviderElementLoadFailures OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCapProvider:elementLoadFailures
        managed object property"
    ::= { cfprDiagSrvCapProviderEntry 6 }

cfprDiagSrvCapProviderElementsLoaded OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCapProvider:elementsLoaded
        managed object property"
    ::= { cfprDiagSrvCapProviderEntry 7 }

cfprDiagSrvCapProviderGencount OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCapProvider:gencount managed
        object property"
    ::= { cfprDiagSrvCapProviderEntry 8 }

cfprDiagSrvCapProviderLoadErrors OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCapProvider:loadErrors
        managed object property"
    ::= { cfprDiagSrvCapProviderEntry 9 }

cfprDiagSrvCapProviderLoadWarnings OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCapProvider:loadWarnings
        managed object property"
    ::= { cfprDiagSrvCapProviderEntry 10 }

cfprDiagSrvCapProviderMgmtPlaneVer OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCapProvider:mgmtPlaneVer
        managed object property"
    ::= { cfprDiagSrvCapProviderEntry 11 }

cfprDiagSrvCapProviderModel OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCapProvider:model managed
        object property"
    ::= { cfprDiagSrvCapProviderEntry 12 }

cfprDiagSrvCapProviderPromCardType OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCapProvider:promCardType
        managed object property"
    ::= { cfprDiagSrvCapProviderEntry 13 }

cfprDiagSrvCapProviderRevision OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCapProvider:revision managed
        object property"
    ::= { cfprDiagSrvCapProviderEntry 14 }

cfprDiagSrvCapProviderVendor OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCapProvider:vendor managed
        object property"
    ::= { cfprDiagSrvCapProviderEntry 15 }

cfprDiagSrvCtrlTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CfprDiagSrvCtrlEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco Firepower diag:SrvCtrl managed object table"
    ::= { cfprDiagObjects 6 }

cfprDiagSrvCtrlEntry OBJECT-TYPE
    SYNTAX           CfprDiagSrvCtrlEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cfprDiagSrvCtrlTable table."
    INDEX { cfprDiagSrvCtrlInstanceId }
    ::= { cfprDiagSrvCtrlTable 1 }

CfprDiagSrvCtrlEntry ::= SEQUENCE {
    cfprDiagSrvCtrlInstanceId                                        CfprManagedObjectId,
    cfprDiagSrvCtrlDn                                                CfprManagedObjectDn,
    cfprDiagSrvCtrlRn                                                SnmpAdminString,
    cfprDiagSrvCtrlAdminState                                        CfprDiagAdminState,
    cfprDiagSrvCtrlEndTs                                             DateAndTime,
    cfprDiagSrvCtrlEndTsM                                            Unsigned64,
    cfprDiagSrvCtrlErrorDescr                                        SnmpAdminString,
    cfprDiagSrvCtrlImgLoc                                            SnmpAdminString,
    cfprDiagSrvCtrlImgName                                           SnmpAdminString,
    cfprDiagSrvCtrlOperQualifier                                     CfprDiagStatusIssues,
    cfprDiagSrvCtrlOperState                                         CfprDiagStatus,
    cfprDiagSrvCtrlRunPolicyName                                     SnmpAdminString,
    cfprDiagSrvCtrlStartTs                                           DateAndTime,
    cfprDiagSrvCtrlStartTsM                                          Unsigned64,
    cfprDiagSrvCtrlType                                              CfprDiagSrvCtrlType
}

cfprDiagSrvCtrlInstanceId OBJECT-TYPE
    SYNTAX       CfprManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cfprDiagSrvCtrlEntry 1 }

cfprDiagSrvCtrlDn OBJECT-TYPE
    SYNTAX       CfprManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCtrl:dn managed object property"
    ::= { cfprDiagSrvCtrlEntry 2 }

cfprDiagSrvCtrlRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCtrl:rn managed object property"
    ::= { cfprDiagSrvCtrlEntry 3 }

cfprDiagSrvCtrlAdminState OBJECT-TYPE
    SYNTAX       CfprDiagAdminState
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCtrl:adminState managed object property"
    ::= { cfprDiagSrvCtrlEntry 4 }

cfprDiagSrvCtrlEndTs OBJECT-TYPE
    SYNTAX       DateAndTime
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCtrl:endTs managed object property"
    ::= { cfprDiagSrvCtrlEntry 5 }

cfprDiagSrvCtrlEndTsM OBJECT-TYPE
    SYNTAX       Unsigned64
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCtrl:endTsM managed object property"
    ::= { cfprDiagSrvCtrlEntry 6 }

cfprDiagSrvCtrlErrorDescr OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCtrl:errorDescr managed object property"
    ::= { cfprDiagSrvCtrlEntry 7 }

cfprDiagSrvCtrlImgLoc OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCtrl:imgLoc managed object property"
    ::= { cfprDiagSrvCtrlEntry 8 }

cfprDiagSrvCtrlImgName OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCtrl:imgName managed object property"
    ::= { cfprDiagSrvCtrlEntry 9 }

cfprDiagSrvCtrlOperQualifier OBJECT-TYPE
    SYNTAX       CfprDiagStatusIssues
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCtrl:operQualifier managed
        object property"
    ::= { cfprDiagSrvCtrlEntry 10 }

cfprDiagSrvCtrlOperState OBJECT-TYPE
    SYNTAX       CfprDiagStatus
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCtrl:operState managed object property"
    ::= { cfprDiagSrvCtrlEntry 11 }

cfprDiagSrvCtrlRunPolicyName OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCtrl:runPolicyName managed
        object property"
    ::= { cfprDiagSrvCtrlEntry 12 }

cfprDiagSrvCtrlStartTs OBJECT-TYPE
    SYNTAX       DateAndTime
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCtrl:startTs managed object property"
    ::= { cfprDiagSrvCtrlEntry 13 }

cfprDiagSrvCtrlStartTsM OBJECT-TYPE
    SYNTAX       Unsigned64
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCtrl:startTsM managed object property"
    ::= { cfprDiagSrvCtrlEntry 14 }

cfprDiagSrvCtrlType OBJECT-TYPE
    SYNTAX       CfprDiagSrvCtrlType
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCtrl:type managed object property"
    ::= { cfprDiagSrvCtrlEntry 15 }

END