-- *********************************************************************
-- CISCO-FIREPOWER-PCI-MIB.my
-- 
-- MIB representation of the Cisco Firepower
-- PCI management information model package
-- 
-- Created May 2024 by Charles Bullis
-- 
-- Copyright (c) 2005-2024 Cisco Systems, Inc. All rights reserved.
-- 
-- *********************************************************************

CISCO-FIREPOWER-PCI-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    Counter32,
    Gauge32,
    TimeTicks,
    Counter64,
    Unsigned32
        FROM SNMPv2-SMI
    TEXTUAL-CONVENTION,
    RowPointer,
    DateAndTime,
    DisplayString,
    MacAddress,
    TimeInterval,
    TimeStamp,
    TruthValue
        FROM SNMPv2-TC
    SnmpAdminString
        FROM SNMP-FRAMEWORK-MIB
    InetAddressIPv4,
    InetAddressIPv6
        FROM INET-ADDRESS-MIB
    ciscoMgmt
        FROM CISCO-SMI
    CiscoNetworkAddress,
    Unsigned64,
    CiscoInetAddressMask,
    CiscoAlarmSeverity,
    TimeIntervalSec
        FROM CISCO-TC
    ciscoFirepowerMIBObjects,
    CfprManagedObjectId,
    CfprManagedObjectDn
        FROM CISCO-FIREPOWER-MIB
    CfprEquipmentDiscoveryState,
    CfprEquipmentOperability,
    CfprEquipmentPowerState,
    CfprEquipmentPresence,
    CfprEquipmentSensorThresholdStatus,
    CfprPciEquipSlotId
        FROM CISCO-FIREPOWER-TC-MIB;

cfprPciObjects MODULE-IDENTITY
    LAST-UPDATED    "202405160000Z"
    ORGANIZATION    "Cisco Systems Inc."
    CONTACT-INFO
        "Cisco Systems
        Customer Service
        
        Postal: 170 W Tasman Drive
        San Jose, CA  95134
        USA
        
        Tel: +1 800 553-NETS
        
        E-mail: firepower-mibs@cisco.com"
    DESCRIPTION
        "MIB representation of the Cisco Firepower
        PCI management information model package"
    ::= { ciscoFirepowerMIBObjects 60 }

cfprPciEquipSlotTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CfprPciEquipSlotEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco Firepower pci:EquipSlot managed object table"
    ::= { cfprPciObjects 1 }

cfprPciEquipSlotEntry OBJECT-TYPE
    SYNTAX           CfprPciEquipSlotEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cfprPciEquipSlotTable table."
    INDEX { cfprPciEquipSlotInstanceId }
    ::= { cfprPciEquipSlotTable 1 }

CfprPciEquipSlotEntry ::= SEQUENCE {
    cfprPciEquipSlotInstanceId                                       CfprManagedObjectId,
    cfprPciEquipSlotDn                                               CfprManagedObjectDn,
    cfprPciEquipSlotRn                                               SnmpAdminString,
    cfprPciEquipSlotControllerReported                               SnmpAdminString,
    cfprPciEquipSlotDiscoveryState                                   CfprEquipmentDiscoveryState,
    cfprPciEquipSlotFltAggr                                          Unsigned64,
    cfprPciEquipSlotHostReported                                     SnmpAdminString,
    cfprPciEquipSlotId                                               CfprPciEquipSlotId,
    cfprPciEquipSlotMacLeft                                          MacAddress,
    cfprPciEquipSlotMacRight                                         MacAddress,
    cfprPciEquipSlotModel                                            SnmpAdminString,
    cfprPciEquipSlotRevision                                         SnmpAdminString,
    cfprPciEquipSlotSerial                                           SnmpAdminString,
    cfprPciEquipSlotSmbiosId                                         Gauge32,
    cfprPciEquipSlotVendor                                           SnmpAdminString
}

cfprPciEquipSlotInstanceId OBJECT-TYPE
    SYNTAX       CfprManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cfprPciEquipSlotEntry 1 }

cfprPciEquipSlotDn OBJECT-TYPE
    SYNTAX       CfprManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:EquipSlot:dn managed object property"
    ::= { cfprPciEquipSlotEntry 2 }

cfprPciEquipSlotRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:EquipSlot:rn managed object property"
    ::= { cfprPciEquipSlotEntry 3 }

cfprPciEquipSlotControllerReported OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:EquipSlot:controllerReported
        managed object property"
    ::= { cfprPciEquipSlotEntry 4 }

cfprPciEquipSlotDiscoveryState OBJECT-TYPE
    SYNTAX       CfprEquipmentDiscoveryState
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:EquipSlot:discoveryState managed
        object property"
    ::= { cfprPciEquipSlotEntry 5 }

cfprPciEquipSlotFltAggr OBJECT-TYPE
    SYNTAX       Unsigned64
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:EquipSlot:fltAggr managed object property"
    ::= { cfprPciEquipSlotEntry 6 }

cfprPciEquipSlotHostReported OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:EquipSlot:hostReported managed
        object property"
    ::= { cfprPciEquipSlotEntry 7 }

cfprPciEquipSlotId OBJECT-TYPE
    SYNTAX       CfprPciEquipSlotId
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:EquipSlot:id managed object property"
    ::= { cfprPciEquipSlotEntry 8 }

cfprPciEquipSlotMacLeft OBJECT-TYPE
    SYNTAX       MacAddress
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:EquipSlot:macLeft managed object property"
    ::= { cfprPciEquipSlotEntry 9 }

cfprPciEquipSlotMacRight OBJECT-TYPE
    SYNTAX       MacAddress
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:EquipSlot:macRight managed object property"
    ::= { cfprPciEquipSlotEntry 10 }

cfprPciEquipSlotModel OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:EquipSlot:model managed object property"
    ::= { cfprPciEquipSlotEntry 11 }

cfprPciEquipSlotRevision OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:EquipSlot:revision managed object property"
    ::= { cfprPciEquipSlotEntry 12 }

cfprPciEquipSlotSerial OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:EquipSlot:serial managed object property"
    ::= { cfprPciEquipSlotEntry 13 }

cfprPciEquipSlotSmbiosId OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:EquipSlot:smbiosId managed object property"
    ::= { cfprPciEquipSlotEntry 14 }

cfprPciEquipSlotVendor OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:EquipSlot:vendor managed object property"
    ::= { cfprPciEquipSlotEntry 15 }

cfprPciUnitTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CfprPciUnitEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco Firepower pci:Unit managed object table"
    ::= { cfprPciObjects 2 }

cfprPciUnitEntry OBJECT-TYPE
    SYNTAX           CfprPciUnitEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cfprPciUnitTable table."
    INDEX { cfprPciUnitInstanceId }
    ::= { cfprPciUnitTable 1 }

CfprPciUnitEntry ::= SEQUENCE {
    cfprPciUnitInstanceId                                            CfprManagedObjectId,
    cfprPciUnitDn                                                    CfprManagedObjectDn,
    cfprPciUnitRn                                                    SnmpAdminString,
    cfprPciUnitId                                                    Gauge32,
    cfprPciUnitLocationDn                                            SnmpAdminString,
    cfprPciUnitModel                                                 SnmpAdminString,
    cfprPciUnitOperQualifierReason                                   SnmpAdminString,
    cfprPciUnitOperState                                             CfprEquipmentOperability,
    cfprPciUnitOperability                                           CfprEquipmentOperability,
    cfprPciUnitPciAddr                                               SnmpAdminString,
    cfprPciUnitPciSlot                                               SnmpAdminString,
    cfprPciUnitPerf                                                  CfprEquipmentSensorThresholdStatus,
    cfprPciUnitPower                                                 CfprEquipmentPowerState,
    cfprPciUnitPresence                                              CfprEquipmentPresence,
    cfprPciUnitRevision                                              SnmpAdminString,
    cfprPciUnitSerial                                                SnmpAdminString,
    cfprPciUnitThermal                                               CfprEquipmentSensorThresholdStatus,
    cfprPciUnitVendor                                                SnmpAdminString,
    cfprPciUnitVoltage                                               CfprEquipmentSensorThresholdStatus
}

cfprPciUnitInstanceId OBJECT-TYPE
    SYNTAX       CfprManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cfprPciUnitEntry 1 }

cfprPciUnitDn OBJECT-TYPE
    SYNTAX       CfprManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:dn managed object property"
    ::= { cfprPciUnitEntry 2 }

cfprPciUnitRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:rn managed object property"
    ::= { cfprPciUnitEntry 3 }

cfprPciUnitId OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:id managed object property"
    ::= { cfprPciUnitEntry 4 }

cfprPciUnitLocationDn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:locationDn managed object property"
    ::= { cfprPciUnitEntry 5 }

cfprPciUnitModel OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:model managed object property"
    ::= { cfprPciUnitEntry 6 }

cfprPciUnitOperQualifierReason OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:operQualifierReason managed
        object property"
    ::= { cfprPciUnitEntry 7 }

cfprPciUnitOperState OBJECT-TYPE
    SYNTAX       CfprEquipmentOperability
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:operState managed object property"
    ::= { cfprPciUnitEntry 8 }

cfprPciUnitOperability OBJECT-TYPE
    SYNTAX       CfprEquipmentOperability
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:operability managed object property"
    ::= { cfprPciUnitEntry 9 }

cfprPciUnitPciAddr OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:pciAddr managed object property"
    ::= { cfprPciUnitEntry 10 }

cfprPciUnitPciSlot OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:pciSlot managed object property"
    ::= { cfprPciUnitEntry 11 }

cfprPciUnitPerf OBJECT-TYPE
    SYNTAX       CfprEquipmentSensorThresholdStatus
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:perf managed object property"
    ::= { cfprPciUnitEntry 12 }

cfprPciUnitPower OBJECT-TYPE
    SYNTAX       CfprEquipmentPowerState
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:power managed object property"
    ::= { cfprPciUnitEntry 13 }

cfprPciUnitPresence OBJECT-TYPE
    SYNTAX       CfprEquipmentPresence
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:presence managed object property"
    ::= { cfprPciUnitEntry 14 }

cfprPciUnitRevision OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:revision managed object property"
    ::= { cfprPciUnitEntry 15 }

cfprPciUnitSerial OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:serial managed object property"
    ::= { cfprPciUnitEntry 16 }

cfprPciUnitThermal OBJECT-TYPE
    SYNTAX       CfprEquipmentSensorThresholdStatus
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:thermal managed object property"
    ::= { cfprPciUnitEntry 17 }

cfprPciUnitVendor OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:vendor managed object property"
    ::= { cfprPciUnitEntry 18 }

cfprPciUnitVoltage OBJECT-TYPE
    SYNTAX       CfprEquipmentSensorThresholdStatus
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:voltage managed object property"
    ::= { cfprPciUnitEntry 19 }

END