--- aliases: tags: publish: true date created: Sunday, November 17th 2024, 5:16 pm date modified: Sunday, November 17th 2024, 5:16 pm --- # Intro to WAN - We don’t just ran cables everywhere - A company may have multiple buildings and needs connections between them - You could use an overlay network or VPN setup - Centralized services for a company - CUCM - cisco’s version of phone servers - POS - point of sale - Email servers - Databases and websites - WAN topologies - Leased lines -reliable but expensive and slow - Frame relay - you used to have to know how to configure these as alternative to leased lines - ATM - also older - MPLS - multi protocol label switching (rage in the 90s) - everything connected and talking - MPLS circuits that connect to routers at all sites - The provider has an MPLS network that handles all of the connections - Everything relies or virtual or logical circuits - kinda at the 2.5 layer - applies label here and MPLS network recognizes the label - Metro ethernet - - doesn’t replace MPLS - edge routers - the router used to connect to the MPLS network is the CE (customer edge) router - the router used to connect to customers from the MPLS network is the PE (provider edge) router - A cable between two sites - They handle the cable - E-LINE and EVC (ethernet virtual circuit) - E-LAN: Sometimes they give you a big cloud switch between your sites - E-Tree: hub and spoke connecting to a hub center - Use QoS to make sure certain traffic gets important treatment - SD-WAN - software defined wide area networking - Go over the public internet but add encryption at higher levels - The cloud is used more so data centers are not as common - Most orgs are hybrid - VPNs and overlay networks - Avoids expensive dedicated lines and can connect sites just as well - site-to-site VPNs can be slow sometimes - Use QoS to make sure certain traffic gets important treatment