/** * Copyright 2015 SmartThings * * Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except * in compliance with the License. You may obtain a copy of the License at: * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software distributed under the License is distributed * on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License * for the specific language governing permissions and limitations under the License. * */ metadata { definition (name: "SmartSense Moisture", namespace: "smartthings", author: "SmartThings", runLocally: true, minHubCoreVersion: '000.017.0012', executeCommandsLocally: false) { capability "Water Sensor" capability "Sensor" capability "Battery" capability "Temperature Measurement" capability "Health Check" fingerprint deviceId: "0x2001", inClusters: "0x30,0x9C,0x9D,0x85,0x80,0x72,0x31,0x84,0x86" fingerprint deviceId: "0x2101", inClusters: "0x71,0x70,0x85,0x80,0x72,0x31,0x84,0x86" fingerprint mfr:"0084", prod:"0063", model:"010C", deviceJoinName: "FortrezZ Moisture Sensor" } simulator { status "dry": "command: 7105, payload: 00 00 00 FF 05 FE 00 00" status "wet": "command: 7105, payload: 00 FF 00 FF 05 02 00 00" status "overheated": "command: 7105, payload: 00 00 00 FF 04 02 00 00" status "freezing": "command: 7105, payload: 00 00 00 FF 04 05 00 00" status "normal": "command: 7105, payload: 00 00 00 FF 04 FE 00 00" for (int i = 0; i <= 100; i += 20) { status "battery ${i}%": new physicalgraph.zwave.Zwave().batteryV1.batteryReport(batteryLevel: i).incomingMessage() } } tiles(scale: 2) { multiAttributeTile(name:"water", type: "generic", width: 6, height: 4){ tileAttribute ("device.water", key: "PRIMARY_CONTROL") { attributeState "dry", label: "Dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff" attributeState "wet", label: "Wet", icon:"st.alarm.water.wet", backgroundColor:"#00A0DC" } } standardTile("temperatureState", "device.temperature", width: 2, height: 2) { state "normal", icon:"st.alarm.temperature.normal", backgroundColor:"#ffffff" state "freezing", icon:"st.alarm.temperature.freeze", backgroundColor:"#00A0DC" state "overheated", icon:"st.alarm.temperature.overheat", backgroundColor:"#e86d13" } valueTile("temperature", "device.temperature", width: 2, height: 2) { state("temperature", label:'${currentValue}°', backgroundColors:[ [value: 31, color: "#153591"], [value: 44, color: "#1e9cbb"], [value: 59, color: "#90d2a7"], [value: 74, color: "#44b621"], [value: 84, color: "#f1d801"], [value: 95, color: "#d04e00"], [value: 96, color: "#bc2323"] ] ) } valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) { state "battery", label:'${currentValue}% battery', unit:"" } main (["water", "temperatureState"]) details(["water", "temperatureState", "temperature", "battery"]) } } def parse(String description) { def result = [] def parsedZwEvent = zwave.parse(description, [0x30: 1, 0x71: 2, 0x84: 1]) if(parsedZwEvent) { if(parsedZwEvent.CMD == "8407") { def lastStatus = device.currentState("battery") def ageInMinutes = lastStatus ? (new Date().time - lastStatus.date.time)/60000 : 600 log.debug "Battery status was last checked ${ageInMinutes} minutes ago" if (ageInMinutes >= 600) { log.debug "Battery status is outdated, requesting battery report" result << new physicalgraph.device.HubAction(zwave.batteryV1.batteryGet().format()) } result << new physicalgraph.device.HubAction(zwave.wakeUpV1.wakeUpNoMoreInformation().format()) } result << createEvent( zwaveEvent(parsedZwEvent) ) } if(!result) result = [ descriptionText: parsedZwEvent, displayed: false ] log.debug "Parse returned ${result}" return result } def installed() { // Device-Watch simply pings if no device events received for 482min(checkInterval) sendEvent(name: "checkInterval", value: 2 * 4 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID]) } def updated() { // Device-Watch simply pings if no device events received for 482min(checkInterval) sendEvent(name: "checkInterval", value: 2 * 4 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID]) } def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) { [descriptionText: "${device.displayName} woke up", isStateChange: false] } def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv1.SensorBinaryReport cmd) { def map = [:] map.name = "water" map.value = cmd.sensorValue ? "wet" : "dry" map.descriptionText = "${device.displayName} is ${map.value}" map } def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) { def map = [:] if(cmd.batteryLevel == 0xFF) { map.name = "battery" map.value = 1 map.descriptionText = "${device.displayName} has a low battery" map.displayed = true } else { map.name = "battery" map.value = cmd.batteryLevel > 0 ? cmd.batteryLevel.toString() : 1 map.unit = "%" map.displayed = false } map } def zwaveEvent(physicalgraph.zwave.commands.alarmv2.AlarmReport cmd) { def map = [:] if (cmd.zwaveAlarmType == physicalgraph.zwave.commands.alarmv2.AlarmReport.ZWAVE_ALARM_TYPE_WATER) { map.name = "water" map.value = cmd.alarmLevel ? "wet" : "dry" map.descriptionText = "${device.displayName} is ${map.value}" } if(cmd.zwaveAlarmType == physicalgraph.zwave.commands.alarmv2.AlarmReport.ZWAVE_ALARM_TYPE_HEAT) { map.name = "temperatureState" if(cmd.zwaveAlarmEvent == 1) { map.value = "overheated"} if(cmd.zwaveAlarmEvent == 2) { map.value = "overheated"} if(cmd.zwaveAlarmEvent == 3) { map.value = "changing temperature rapidly"} if(cmd.zwaveAlarmEvent == 4) { map.value = "changing temperature rapidly"} if(cmd.zwaveAlarmEvent == 5) { map.value = "freezing"} if(cmd.zwaveAlarmEvent == 6) { map.value = "freezing"} if(cmd.zwaveAlarmEvent == 254) { map.value = "normal"} map.descriptionText = "${device.displayName} is ${map.value}" } map } def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) { def map = [:] if(cmd.sensorType == 1) { map.name = "temperature" if(cmd.scale == 0) { map.value = getTemperature(cmd.scaledSensorValue) } else { map.value = cmd.scaledSensorValue } map.unit = location.temperatureScale } map } def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) { def map = [:] map.name = "water" map.value = cmd.value ? "wet" : "dry" map.descriptionText = "${device.displayName} is ${map.value}" map } def getTemperature(value) { if(location.temperatureScale == "C"){ return value } else { return Math.round(celsiusToFahrenheit(value)) } } def zwaveEvent(physicalgraph.zwave.Command cmd) { log.debug "COMMAND CLASS: $cmd" }