# Fusion command parity

Generated by `cargo xtask parity` from `xtask/data/fusion-catalog.tsv` (the toolbar commands of Fusion's Design workspace, ids and names only) and the live command registry (`solvecraft-cli commands`). A command counts as live when SolveCraft registers the same command id. This measures breadth, not depth; see ROADMAP.md and docs/oracle.md for depth.

**In scope (SOLID, SKETCH, ASSEMBLY, SHEET METAL, PLASTIC enclosure subset): 335 / 541 commands live (62%).** SOLID + SKETCH: 188 / 291 (65%). Registered commands: 311.

Deferred until further notice (not in the in-scope figure): MESH, FORM, SURFACE beyond what solids need, PCB, render, animation, simulation, manufacture, drawings, MANAGE, UTILITIES and the rest of PLASTIC. All Design tabs together: 630 / 1175 (54%).

| Tab | Panel | Live | Total | % |
|---|---|---:|---:|---:|
| SOLID | CREATE | 23 | 35 | 66% |
| SOLID | MODIFY | 19 | 32 | 59% |
| SOLID | ASSEMBLE | 12 | 21 | 57% |
| SOLID | CONFIGURE | 3 | 3 | 100% |
| SOLID | CONSTRUCT | 19 | 20 | 95% |
| SOLID | INSPECT | 12 | 25 | 48% |
| SOLID | INSERT | 6 | 11 | 55% |
| SOLID | SELECT | 0 | 15 | 0% |
| SOLID | POSITION | 2 | 2 | 100% |
| SKETCH | CREATE | 41 | 41 | 100% |
| SKETCH | MODIFY | 12 | 12 | 100% |
| SKETCH | CONSTRAINTS | 15 | 15 | 100% |
| SKETCH | CONFIGURE | 3 | 3 | 100% |
| SKETCH | INSPECT | 12 | 25 | 48% |
| SKETCH | INSERT | 7 | 13 | 54% |
| SKETCH | ASSEMBLE | 0 | 1 | 0% |
| SKETCH | SELECT | 0 | 15 | 0% |
| SKETCH | FINISH SKETCH | 2 | 2 | 100% |
| SHEET METAL | CREATE | 15 | 19 | 79% |
| SHEET METAL | MODIFY | 12 | 21 | 57% |
| SHEET METAL | ASSEMBLE | 11 | 20 | 55% |
| SHEET METAL | CONFIGURE | 3 | 3 | 100% |
| SHEET METAL | CONSTRUCT | 19 | 20 | 95% |
| SHEET METAL | INSPECT | 12 | 25 | 48% |
| SHEET METAL | INSERT | 6 | 11 | 55% |
| SHEET METAL | SELECT | 0 | 15 | 0% |
| SHEET METAL | REFOLD | 0 | 1 | 0% |
| SHEET METAL | POSITION | 2 | 2 | 100% |
| ASSEMBLY | INSERT | 4 | 8 | 50% |
| ASSEMBLY | CREATE | 5 | 8 | 62% |
| ASSEMBLY | RELATIONSHIPS | 4 | 11 | 36% |
| ASSEMBLY | MOTION | 3 | 3 | 100% |
| ASSEMBLY | MODIFY | 8 | 11 | 73% |
| ASSEMBLY | CONTACT | 2 | 2 | 100% |
| ASSEMBLY | CONFIGURE | 3 | 3 | 100% |
| ASSEMBLY | CONSTRUCT | 19 | 20 | 95% |
| ASSEMBLY | INSPECT | 12 | 25 | 48% |
| ASSEMBLY | SELECT | 0 | 15 | 0% |
| ASSEMBLY | POSITION | 2 | 2 | 100% |
| PLASTIC | enclosure subset | 5 | 5 | 100% |

### Deferred tabs

| Tab | Panel | Live | Total | % |
|---|---|---:|---:|---:|
| SURFACE | CREATE | 9 | 25 | 36% |
| SURFACE | MODIFY | 17 | 26 | 65% |
| SURFACE | ASSEMBLE | 11 | 20 | 55% |
| SURFACE | CONFIGURE | 3 | 3 | 100% |
| SURFACE | CONSTRUCT | 19 | 20 | 95% |
| SURFACE | INSPECT | 12 | 25 | 48% |
| SURFACE | INSERT | 6 | 11 | 55% |
| SURFACE | SELECT | 0 | 15 | 0% |
| SURFACE | POSITION | 2 | 2 | 100% |
| MESH | CREATE | 2 | 5 | 40% |
| MESH | PREPARE | 0 | 4 | 0% |
| MESH | MODIFY | 6 | 30 | 20% |
| MESH | ASSEMBLE | 12 | 21 | 57% |
| MESH | CONFIGURE | 3 | 3 | 100% |
| MESH | CONSTRUCT | 19 | 20 | 95% |
| MESH | INSPECT | 12 | 25 | 48% |
| MESH | INSERT | 5 | 10 | 50% |
| MESH | SELECT | 0 | 10 | 0% |
| MESH | EXPORT | 0 | 1 | 0% |
| MESH | POSITION | 2 | 2 | 100% |
| FORM | CREATE | 2 | 14 | 14% |
| FORM | MODIFY | 5 | 31 | 16% |
| FORM | SYMMETRY | 0 | 6 | 0% |
| FORM | UTILITIES | 0 | 5 | 0% |
| FORM | CONSTRUCT | 19 | 20 | 95% |
| FORM | INSPECT | 12 | 25 | 48% |
| FORM | INSERT | 7 | 13 | 54% |
| FORM | ASSEMBLE | 0 | 1 | 0% |
| FORM | SELECT | 0 | 15 | 0% |
| FORM | FINISH FORM | 0 | 1 | 0% |
| PLASTIC | SETUP | 2 | 2 | 100% |
| PLASTIC | CREATE | 27 | 35 | 77% |
| PLASTIC | MODIFY | 19 | 32 | 59% |
| PLASTIC | ASSEMBLE | 11 | 20 | 55% |
| PLASTIC | CONFIGURE | 3 | 3 | 100% |
| PLASTIC | CONSTRUCT | 19 | 20 | 95% |
| PLASTIC | INSPECT | 12 | 26 | 46% |
| PLASTIC | INSERT | 6 | 11 | 55% |
| PLASTIC | SELECT | 0 | 15 | 0% |
| PLASTIC | POSITION | 2 | 2 | 100% |
| MANAGE | ASSIGN | 0 | 1 | 0% |
| MANAGE | RELEASE | 0 | 2 | 0% |
| MANAGE | BOM | 0 | 2 | 0% |
| MANAGE | PROCESS MANAGEMENT | 0 | 3 | 0% |
| MANAGE | TASK MANAGEMENT | 0 | 3 | 0% |
| UTILITIES | MODELING TOOLS | 0 | 1 | 0% |
| UTILITIES | MAKE | 0 | 1 | 0% |
| UTILITIES | NEST | 0 | 1 | 0% |
| UTILITIES | ADD-INS | 0 | 2 | 0% |
| UTILITIES | UTILITY | 1 | 3 | 33% |
| UTILITIES | INSPECT | 11 | 24 | 46% |
| UTILITIES | CREATE PMI | 0 | 4 | 0% |
| UTILITIES | SELECT | 0 | 15 | 0% |
| UTILITIES | POSITION | 2 | 2 | 100% |

## Live (SOLID, SKETCH)

- SOLID › CREATE › Create Sketch
- SOLID › CREATE › Extrude
- SOLID › CREATE › Revolve
- SOLID › CREATE › Sweep
- SOLID › CREATE › Loft
- SOLID › CREATE › Rib
- SOLID › CREATE › Web
- SOLID › CREATE › Emboss
- SOLID › CREATE › Hole
- SOLID › CREATE › Thread
- SOLID › CREATE › Box
- SOLID › CREATE › Cylinder
- SOLID › CREATE › Sphere
- SOLID › CREATE › Torus
- SOLID › CREATE › Coil
- SOLID › CREATE › Pipe
- SOLID › CREATE › Bounding Solid
- SOLID › CREATE › Rectangular Pattern
- SOLID › CREATE › Circular Pattern
- SOLID › CREATE › Pattern on Path
- SOLID › CREATE › Mirror
- SOLID › CREATE › Thicken
- SOLID › CREATE › Joint Origin
- SOLID › MODIFY › Press Pull
- SOLID › MODIFY › Fillet
- SOLID › MODIFY › Chamfer
- SOLID › MODIFY › Shell
- SOLID › MODIFY › Draft
- SOLID › MODIFY › Scale
- SOLID › MODIFY › Combine
- SOLID › MODIFY › Offset Face
- SOLID › MODIFY › Replace Face
- SOLID › MODIFY › Split Face
- SOLID › MODIFY › Split Body
- SOLID › MODIFY › Move/Copy
- SOLID › MODIFY › Align
- SOLID › MODIFY › Delete
- SOLID › MODIFY › Remove
- SOLID › MODIFY › Physical Material
- SOLID › MODIFY › Appearance
- SOLID › MODIFY › Change Parameters
- SOLID › MODIFY › Compute All
- SOLID › ASSEMBLE › Insert Component
- SOLID › ASSEMBLE › New Component
- SOLID › ASSEMBLE › Joint
- SOLID › ASSEMBLE › As-Built Joint
- SOLID › ASSEMBLE › Rigid Group
- SOLID › ASSEMBLE › Drive Joints
- SOLID › ASSEMBLE › Motion Link
- SOLID › ASSEMBLE › Motion Study
- SOLID › ASSEMBLE › Enable Contact Sets
- SOLID › ASSEMBLE › Enable All Contact
- SOLID › ASSEMBLE › Disable Contact
- SOLID › ASSEMBLE › New Contact Set
- SOLID › CONFIGURE › Configure
- SOLID › CONFIGURE › Display Configuration Table
- SOLID › CONFIGURE › Create Configuration Rules
- SOLID › CONSTRUCT › Offset Plane
- SOLID › CONSTRUCT › Plane at Angle
- SOLID › CONSTRUCT › Tangent Plane
- SOLID › CONSTRUCT › Midplane
- SOLID › CONSTRUCT › Perpendicular Plane
- SOLID › CONSTRUCT › Plane Through Two Edges
- SOLID › CONSTRUCT › Plane Through Three Points
- SOLID › CONSTRUCT › Plane Along Path
- SOLID › CONSTRUCT › Axis Through Cylinder/Cone/Torus
- SOLID › CONSTRUCT › Axis Perpendicular To Face
- SOLID › CONSTRUCT › Axis Through Two Planes
- SOLID › CONSTRUCT › Axis Through Two Points
- SOLID › CONSTRUCT › Axis Through Edge
- SOLID › CONSTRUCT › Point At Vertex
- SOLID › CONSTRUCT › Point Through Two Edges
- SOLID › CONSTRUCT › Point Through Three Planes
- SOLID › CONSTRUCT › Point At Center Of Circle/Sphere/Torus
- SOLID › CONSTRUCT › Point At Edge And Plane
- SOLID › CONSTRUCT › Point Along Path
- SOLID › INSPECT › Measure
- SOLID › INSPECT › Interference
- SOLID › INSPECT › Section Analysis
- SOLID › INSPECT › Curvature Comb Analysis
- SOLID › INSPECT › Curvature Map Analysis
- SOLID › INSPECT › Draft Analysis
- SOLID › INSPECT › Environment Map Analysis
- SOLID › INSPECT › Isocurve Analysis
- SOLID › INSPECT › Zebra Analysis
- SOLID › INSPECT › Accessibility Analysis
- SOLID › INSPECT › Center of Mass
- SOLID › INSPECT › Minimum Radius Analysis
- SOLID › INSERT › Decal
- SOLID › INSERT › Canvas
- SOLID › INSERT › Insert SVG
- SOLID › INSERT › Insert DXF
- SOLID › INSERT › Insert Mesh
- SOLID › INSERT › Insert Fastener
- SOLID › POSITION › Capture Position
- SOLID › POSITION › Revert Position
- SKETCH › CREATE › Line
- SKETCH › CREATE › Midpoint Line
- SKETCH › CREATE › SketchConstrainer
- SKETCH › CREATE › 2-Point Rectangle
- SKETCH › CREATE › 3-Point Rectangle
- SKETCH › CREATE › Center Rectangle
- SKETCH › CREATE › Center Diameter Circle
- SKETCH › CREATE › 2-Point Circle
- SKETCH › CREATE › 3-Point Circle
- SKETCH › CREATE › 2-Tangent Circle
- SKETCH › CREATE › 3-Tangent Circle
- SKETCH › CREATE › 3-Point Arc
- SKETCH › CREATE › Center Point Arc
- SKETCH › CREATE › Tangent Arc
- SKETCH › CREATE › Circumscribed Polygon
- SKETCH › CREATE › Inscribed Polygon
- SKETCH › CREATE › Edge Polygon
- SKETCH › CREATE › Ellipse
- SKETCH › CREATE › Center to Center Slot
- SKETCH › CREATE › Overall Slot
- SKETCH › CREATE › Center Point Slot
- SKETCH › CREATE › Three Point Arc Slot
- SKETCH › CREATE › Center Point Arc Slot
- SKETCH › CREATE › Fit Point Spline
- SKETCH › CREATE › Control Point Spline
- SKETCH › CREATE › Control Point Spline
- SKETCH › CREATE › Conic Curve
- SKETCH › CREATE › Point
- SKETCH › CREATE › Text
- SKETCH › CREATE › Fit Curves to Mesh Section
- SKETCH › CREATE › Mirror
- SKETCH › CREATE › Circular Pattern
- SKETCH › CREATE › Rectangular Pattern
- SKETCH › CREATE › Project
- SKETCH › CREATE › Intersect
- SKETCH › CREATE › Spun Profile
- SKETCH › CREATE › Include 3D Geometry
- SKETCH › CREATE › Project To Surface
- SKETCH › CREATE › Intersection Curve
- SKETCH › CREATE › Isoparametric Curve
- SKETCH › CREATE › Sketch Dimension
- SKETCH › MODIFY › Fillet
- SKETCH › MODIFY › Equal Distance Chamfer
- SKETCH › MODIFY › Distance and Angle Chamfer
- SKETCH › MODIFY › Two Distance Chamfer
- SKETCH › MODIFY › Blend Curve
- SKETCH › MODIFY › Offset
- SKETCH › MODIFY › Trim
- SKETCH › MODIFY › Extend
- SKETCH › MODIFY › Break
- SKETCH › MODIFY › Sketch Scale
- SKETCH › MODIFY › Move/Copy
- SKETCH › MODIFY › Change Parameters
- SKETCH › CONSTRAINTS › AutoConstrain
- SKETCH › CONSTRAINTS › AutoConstrain from datum
- SKETCH › CONSTRAINTS › Horizontal/Vertical
- SKETCH › CONSTRAINTS › Coincident
- SKETCH › CONSTRAINTS › Tangent
- SKETCH › CONSTRAINTS › Equal
- SKETCH › CONSTRAINTS › Parallel
- SKETCH › CONSTRAINTS › Perpendicular
- SKETCH › CONSTRAINTS › Fix/UnFix
- SKETCH › CONSTRAINTS › MidPoint
- SKETCH › CONSTRAINTS › Concentric
- SKETCH › CONSTRAINTS › Collinear
- SKETCH › CONSTRAINTS › Symmetry
- SKETCH › CONSTRAINTS › Curvature
- SKETCH › CONSTRAINTS › Polygon
- SKETCH › CONFIGURE › Configure
- SKETCH › CONFIGURE › Display Configuration Table
- SKETCH › CONFIGURE › Create Configuration Rules
- SKETCH › INSPECT › Measure
- SKETCH › INSPECT › Interference
- SKETCH › INSPECT › Section Analysis
- SKETCH › INSPECT › Curvature Comb Analysis
- SKETCH › INSPECT › Curvature Map Analysis
- SKETCH › INSPECT › Draft Analysis
- SKETCH › INSPECT › Environment Map Analysis
- SKETCH › INSPECT › Isocurve Analysis
- SKETCH › INSPECT › Zebra Analysis
- SKETCH › INSPECT › Accessibility Analysis
- SKETCH › INSPECT › Center of Mass
- SKETCH › INSPECT › Minimum Radius Analysis
- SKETCH › INSERT › Decal
- SKETCH › INSERT › Canvas
- SKETCH › INSERT › Insert SVG
- SKETCH › INSERT › Insert DXF
- SKETCH › INSERT › Insert Mesh
- SKETCH › INSERT › Insert Component
- SKETCH › INSERT › Insert Fastener
- SKETCH › FINISH SKETCH › Finish Sketch
- SKETCH › FINISH SKETCH › Finish with AutoConstrain

## Not yet (SOLID, SKETCH)

- SOLID › CREATE › Create Form
- SOLID › CREATE › Derive
- SOLID › CREATE › Automated Modeling
- SOLID › CREATE › Geometric Pattern
- SOLID › CREATE › Boundary Fill
- SOLID › CREATE › Find Features
- SOLID › CREATE › Fluid Volume
- SOLID › CREATE › Create Base Feature
- SOLID › CREATE › Create Linked PCB
- SOLID › CREATE › Derive PCB
- SOLID › CREATE › Create Unlinked PCB
- SOLID › CREATE › Generate Timeline
- SOLID › MODIFY › Edit Face
- SOLID › MODIFY › Silhouette Split
- SOLID › MODIFY › Arrange
- SOLID › MODIFY › Remove Features
- SOLID › MODIFY › Remove Faces
- SOLID › MODIFY › Replace with Primitives
- SOLID › MODIFY › Volumetric Lattice
- SOLID › MODIFY › Volumetric Texture
- SOLID › MODIFY › VolFieldModifyModelCommand
- SOLID › MODIFY › Manage Materials
- SOLID › MODIFY › Compute Unresolved
- SOLID › MODIFY › Convert
- SOLID › MODIFY › Bill of Materials
- SOLID › ASSEMBLE › Duplicate With Joints
- SOLID › ASSEMBLE › Constrain Components
- SOLID › ASSEMBLE › Align Constraint
- SOLID › ASSEMBLE › Angle Constraint
- SOLID › ASSEMBLE › Center Constraint
- SOLID › ASSEMBLE › Tangent Constraint
- SOLID › ASSEMBLE › Joint Constraint
- SOLID › ASSEMBLE › As-Built Constraint
- SOLID › CONSTRUCT › User Coordinate System (UCS)
- SOLID › INSPECT › Validate
- SOLID › INSPECT › Component Connection Analysis
- SOLID › INSPECT › DOF Analysis
- SOLID › INSPECT › Edit Component Connection Analysis
- SOLID › INSPECT › Fastener Stack Analysis
- SOLID › INSPECT › Find Similar Components
- SOLID › INSPECT › Navigator
- SOLID › INSPECT › Display Component Colors
- SOLID › INSPECT › Display Mesh Face Groups
- SOLID › INSPECT › Assembly Statistics
- SOLID › INSPECT › Change Summary
- SOLID › INSPECT › History
- SOLID › INSPECT › Sustainability Insights
- SOLID › INSERT › Insert T-Spline
- SOLID › INSERT › Insert Derive
- SOLID › INSERT › Insert McMaster-Carr Component
- SOLID › INSERT › Insert a manufacturer part
- SOLID › INSERT › Insert TraceParts Supplier Components
- SOLID › ASSEMBLE › Add To Assembly
- SOLID › SELECT › Select
- SOLID › SELECT › Window Selection
- SOLID › SELECT › Freeform Selection
- SOLID › SELECT › Paint Selection
- SOLID › SELECT › Select By Name
- SOLID › SELECT › Select By Boundary
- SOLID › SELECT › Select By Size
- SOLID › SELECT › Invert Selection
- SOLID › SELECT › Seed And Boundary
- SOLID › SELECT › Component Drag
- SOLID › SELECT › Select Body Priority
- SOLID › SELECT › Select Face Priority
- SOLID › SELECT › Select Edge Priority
- SOLID › SELECT › Select Component Priority
- SOLID › SELECT › Selection Filters
- SKETCH › INSPECT › Validate
- SKETCH › INSPECT › Component Connection Analysis
- SKETCH › INSPECT › DOF Analysis
- SKETCH › INSPECT › Edit Component Connection Analysis
- SKETCH › INSPECT › Fastener Stack Analysis
- SKETCH › INSPECT › Find Similar Components
- SKETCH › INSPECT › Navigator
- SKETCH › INSPECT › Display Component Colors
- SKETCH › INSPECT › Display Mesh Face Groups
- SKETCH › INSPECT › Assembly Statistics
- SKETCH › INSPECT › Change Summary
- SKETCH › INSPECT › History
- SKETCH › INSPECT › Sustainability Insights
- SKETCH › INSERT › Insert T-Spline
- SKETCH › INSERT › Duplicate With Joints
- SKETCH › INSERT › Insert Derive
- SKETCH › INSERT › Insert McMaster-Carr Component
- SKETCH › INSERT › Insert a manufacturer part
- SKETCH › INSERT › Insert TraceParts Supplier Components
- SKETCH › ASSEMBLE › Add To Assembly
- SKETCH › SELECT › Select
- SKETCH › SELECT › Window Selection
- SKETCH › SELECT › Freeform Selection
- SKETCH › SELECT › Paint Selection
- SKETCH › SELECT › Select By Name
- SKETCH › SELECT › Select By Boundary
- SKETCH › SELECT › Select By Size
- SKETCH › SELECT › Invert Selection
- SKETCH › SELECT › Seed And Boundary
- SKETCH › SELECT › Component Drag
- SKETCH › SELECT › Select Body Priority
- SKETCH › SELECT › Select Face Priority
- SKETCH › SELECT › Select Edge Priority
- SKETCH › SELECT › Select Component Priority
- SKETCH › SELECT › Selection Filters