(kicad_pcb (version 20171130) (host pcbnew 5.1.9) (general (thickness 1.6) (drawings 7) (tracks 350) (zones 0) (modules 39) (nets 66) ) (page A4) (layers (0 F.Cu signal) (31 B.Cu signal) (32 B.Adhes user hide) (33 F.Adhes user hide) (34 B.Paste user hide) (35 F.Paste user hide) (36 B.SilkS user) (37 F.SilkS user) (38 B.Mask user) (39 F.Mask user) (40 Dwgs.User user hide) (41 Cmts.User user hide) (42 Eco1.User user hide) (43 Eco2.User user hide) (44 Edge.Cuts user) (45 Margin user hide) (46 B.CrtYd user) (47 F.CrtYd user) (48 B.Fab user) (49 F.Fab user) ) (setup (last_trace_width 0.35) (user_trace_width 0.35) (user_trace_width 0.5) (trace_clearance 0.25) (zone_clearance 0.508) (zone_45_only no) (trace_min 0.35) (via_size 1.2) (via_drill 0.5) (via_min_size 0.4) (via_min_drill 0.3) (uvia_size 0.3) (uvia_drill 0.1) (uvias_allowed no) (uvia_min_size 0.2) (uvia_min_drill 0.1) (edge_width 0.05) (segment_width 0.2) (pcb_text_width 0.3) (pcb_text_size 1.5 1.5) (mod_edge_width 0.12) (mod_text_size 1 1) (mod_text_width 0.15) (pad_size 1.5 1.5) (pad_drill 0) (pad_to_mask_clearance 0) (aux_axis_origin 162.25 149.5) (visible_elements FFFFFF7F) (pcbplotparams (layerselection 0x01000_ffffffff) (usegerberextensions false) (usegerberattributes true) (usegerberadvancedattributes true) (creategerberjobfile true) (excludeedgelayer false) (linewidth 0.100000) (plotframeref false) (viasonmask false) (mode 1) (useauxorigin false) (hpglpennumber 1) (hpglpenspeed 20) (hpglpendiameter 15.000000) (psnegative false) (psa4output false) (plotreference false) (plotvalue false) (plotinvisibletext false) (padsonsilk false) (subtractmaskfromsilk false) (outputformat 5) (mirror false) (drillshape 2) (scaleselection 1) (outputdirectory "./output/")) ) (net 0 "") (net 1 GND) (net 2 +3V3) (net 3 +5V) (net 4 "Net-(J1-Pad40)") (net 5 "Net-(J1-Pad39)") (net 6 "Net-(J1-Pad26)") (net 7 "Net-(J1-Pad22)") (net 8 "Net-(J1-Pad21)") (net 9 "Net-(J1-Pad30)") (net 10 "Net-(J1-Pad8)") (net 11 "Net-(J1-Pad7)") (net 12 "Net-(J1-Pad32)") (net 13 "Net-(J1-Pad31)") (net 14 "Net-(J1-Pad18)") (net 15 "Net-(J1-Pad36)") (net 16 "Net-(J1-Pad35)") (net 17 "Net-(J1-Pad34)") (net 18 "Net-(J1-Pad33)") (net 19 "Net-(J1-Pad38)") (net 20 "Net-(J1-Pad37)") (net 21 "Net-(J1-Pad20)") (net 22 "Net-(J1-Pad19)") (net 23 "Net-(J1-Pad10)") (net 24 "Net-(J1-Pad9)") (net 25 "Net-(J1-Pad14)") (net 26 OUT2) (net 27 "Net-(J1-Pad28)") (net 28 "Net-(J1-Pad27)") (net 29 "Net-(J1-Pad12)") (net 30 OUT1) (net 31 "Net-(J1-Pad24)") (net 32 "Net-(J1-Pad23)") (net 33 SCL) (net 34 "Net-(J1-Pad4)") (net 35 "Net-(J1-Pad16)") (net 36 OUT3) (net 37 SDA) (net 38 "Net-(J2-Pad3)") (net 39 "Net-(J3-Pad3)") (net 40 "Net-(J4-Pad3)") (net 41 "Net-(J5-Pad3)") (net 42 "Net-(J6-Pad3)") (net 43 "Net-(J7-Pad3)") (net 44 "Net-(J8-Pad3)") (net 45 "Net-(R4-Pad2)") (net 46 "Net-(R5-Pad2)") (net 47 "Net-(R6-Pad2)") (net 48 SDA_5V) (net 49 SCL_5V) (net 50 "Net-(R10-Pad1)") (net 51 "Net-(R11-Pad2)") (net 52 "Net-(R13-Pad2)") (net 53 "Net-(R15-Pad2)") (net 54 "Net-(U1-Pad15)") (net 55 "Net-(U1-Pad14)") (net 56 "Net-(U1-Pad13)") (net 57 "Net-(U1-Pad8)") (net 58 "Net-(U1-Pad7)") (net 59 "Net-(U1-Pad6)") (net 60 "Net-(J1-Pad6)") (net 61 "Net-(R17-Pad1)") (net 62 "Net-(R18-Pad1)") (net 63 "Net-(R19-Pad1)") (net 64 "Net-(C3-Pad1)") (net 65 1Wire) (net_class Default "This is the default net class." (clearance 0.25) (trace_width 0.35) (via_dia 1.2) (via_drill 0.5) (uvia_dia 0.3) (uvia_drill 0.1) (diff_pair_width 0.35) (diff_pair_gap 0.25) (add_net +3V3) (add_net 1Wire) (add_net "Net-(C3-Pad1)") (add_net "Net-(J1-Pad10)") (add_net "Net-(J1-Pad12)") (add_net "Net-(J1-Pad14)") (add_net "Net-(J1-Pad16)") (add_net "Net-(J1-Pad18)") (add_net "Net-(J1-Pad19)") (add_net "Net-(J1-Pad20)") (add_net "Net-(J1-Pad21)") (add_net "Net-(J1-Pad22)") (add_net "Net-(J1-Pad23)") (add_net "Net-(J1-Pad24)") (add_net "Net-(J1-Pad26)") (add_net "Net-(J1-Pad27)") (add_net "Net-(J1-Pad28)") (add_net "Net-(J1-Pad30)") (add_net "Net-(J1-Pad31)") (add_net "Net-(J1-Pad32)") (add_net "Net-(J1-Pad33)") (add_net "Net-(J1-Pad34)") (add_net "Net-(J1-Pad35)") (add_net "Net-(J1-Pad36)") (add_net "Net-(J1-Pad37)") (add_net "Net-(J1-Pad38)") (add_net "Net-(J1-Pad39)") (add_net "Net-(J1-Pad4)") (add_net "Net-(J1-Pad40)") (add_net "Net-(J1-Pad6)") (add_net "Net-(J1-Pad7)") (add_net "Net-(J1-Pad8)") (add_net "Net-(J1-Pad9)") (add_net "Net-(J2-Pad3)") (add_net "Net-(J3-Pad3)") (add_net "Net-(J4-Pad3)") (add_net "Net-(J5-Pad3)") (add_net "Net-(J6-Pad3)") (add_net "Net-(J7-Pad3)") (add_net "Net-(J8-Pad3)") (add_net "Net-(R10-Pad1)") (add_net "Net-(R11-Pad2)") (add_net "Net-(R13-Pad2)") (add_net "Net-(R15-Pad2)") (add_net "Net-(R17-Pad1)") (add_net "Net-(R18-Pad1)") (add_net "Net-(R19-Pad1)") (add_net "Net-(R4-Pad2)") (add_net "Net-(R5-Pad2)") (add_net "Net-(R6-Pad2)") (add_net "Net-(U1-Pad13)") (add_net "Net-(U1-Pad14)") (add_net "Net-(U1-Pad15)") (add_net "Net-(U1-Pad6)") (add_net "Net-(U1-Pad7)") (add_net "Net-(U1-Pad8)") (add_net OUT1) (add_net OUT2) (add_net OUT3) (add_net SCL) (add_net SCL_5V) (add_net SDA) (add_net SDA_5V) ) (net_class Power "" (clearance 0.25) (trace_width 0.5) (via_dia 1.2) (via_drill 0.5) (uvia_dia 0.3) (uvia_drill 0.1) (diff_pair_width 0.35) (diff_pair_gap 0.25) (add_net +5V) (add_net GND) ) (module TestPoint:TestPoint_Pad_D1.5mm (layer F.Cu) (tedit 5FEE3D44) (tstamp 5FEEEDF1) (at 152.75 88) (descr "SMD pad as test Point, diameter 1.5mm") (tags "test point SMD pad") (attr virtual) (fp_text reference GND (at 0 -2.25) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value TestPoint_Pad_D1.5mm (at 0 1.75) (layer F.Fab) hide (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 -1.65) (layer F.Fab) hide (effects (font (size 1 1) (thickness 0.15))) ) (fp_circle (center 0 0) (end 1.25 0) (layer F.CrtYd) (width 0.05)) (fp_circle (center 0 0) (end 0 0.95) (layer F.SilkS) (width 0.12)) (pad "" smd circle (at 0 0) (size 1.5 1.5) (layers F.Cu F.Mask) (net 1 GND)) ) (module TestPoint:TestPoint_Pad_D1.5mm (layer F.Cu) (tedit 5FEE3D3C) (tstamp 5FEEEF77) (at 145.5 88) (descr "SMD pad as test Point, diameter 1.5mm") (tags "test point SMD pad") (attr virtual) (fp_text reference 3.3V (at 0 -2.25) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value TestPoint_Pad_D1.5mm (at 0 1.75) (layer F.Fab) hide (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 -1.65) (layer F.Fab) hide (effects (font (size 1 1) (thickness 0.15))) ) (fp_circle (center 0 0) (end 1.25 0) (layer F.CrtYd) (width 0.05)) (fp_circle (center 0 0) (end 0 0.95) (layer F.SilkS) (width 0.12)) (pad "" smd circle (at 0 0) (size 1.5 1.5) (layers F.Cu F.Mask) (net 2 +3V3)) ) (module TestPoint:TestPoint_Pad_D1.5mm (layer F.Cu) (tedit 5FEE3D07) (tstamp 5FEEEC1E) (at 149 88) (descr "SMD pad as test Point, diameter 1.5mm") (tags "test point SMD pad") (attr virtual) (fp_text reference 5V (at 0 -2.25 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value TestPoint_Pad_D1.5mm (at 0 1.75) (layer F.Fab) hide (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 -1.65) (layer F.Fab) hide (effects (font (size 1 1) (thickness 0.15))) ) (fp_circle (center 0 0) (end 1.25 0) (layer F.CrtYd) (width 0.05)) (fp_circle (center 0 0) (end 0 0.95) (layer F.SilkS) (width 0.12)) (pad "" smd circle (at 0 0) (size 1.5 1.5) (layers F.Cu F.Mask) (net 3 +5V)) ) (module Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 5FEE49E0) (at 154.25 115.5 270) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FF119F7) (attr smd) (fp_text reference R3 (at 0 2) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 4.7k (at 0 -1.65 270) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text user %R (at 0 0 270) (layer B.Fab) (effects (font (size 0.5 0.5) (thickness 0.08)) (justify mirror)) ) (fp_line (start -1 -0.625) (end -1 0.625) (layer B.Fab) (width 0.1)) (fp_line (start -1 0.625) (end 1 0.625) (layer B.Fab) (width 0.1)) (fp_line (start 1 0.625) (end 1 -0.625) (layer B.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end -1 -0.625) (layer B.Fab) (width 0.1)) (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer B.SilkS) (width 0.12)) (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer B.SilkS) (width 0.12)) (fp_line (start -1.85 -0.95) (end -1.85 0.95) (layer B.CrtYd) (width 0.05)) (fp_line (start -1.85 0.95) (end 1.85 0.95) (layer B.CrtYd) (width 0.05)) (fp_line (start 1.85 0.95) (end 1.85 -0.95) (layer B.CrtYd) (width 0.05)) (fp_line (start 1.85 -0.95) (end -1.85 -0.95) (layer B.CrtYd) (width 0.05)) (pad 2 smd roundrect (at 1 0 270) (size 1.2 1.4) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.208333) (net 65 1Wire)) (pad 1 smd roundrect (at -1 0 270) (size 1.2 1.4) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.208333) (net 2 +3V3)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical (layer F.Cu) (tedit 5FEE3BDC) (tstamp 5FEE9119) (at 144.5 115.75 90) (descr "Through hole straight pin header, 1x03, 2.54mm pitch, single row") (tags "Through hole pin header THT 1x03 2.54mm single row") (path /5FEE9913) (fp_text reference J9 (at 0 -2.33 90) (layer F.SilkS) hide (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1Wire (at -2.75 0 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 2.54) (layer F.Fab) hide (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer F.Fab) (width 0.1)) (fp_line (start 1.27 -1.27) (end 1.27 6.35) (layer F.Fab) (width 0.1)) (fp_line (start 1.27 6.35) (end -1.27 6.35) (layer F.Fab) (width 0.1)) (fp_line (start -1.27 6.35) (end -1.27 -0.635) (layer F.Fab) (width 0.1)) (fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer F.Fab) (width 0.1)) (fp_line (start -1.33 6.41) (end 1.33 6.41) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 1.27) (end -1.33 6.41) (layer F.SilkS) (width 0.12)) (fp_line (start 1.33 1.27) (end 1.33 6.41) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 1.27) (end 1.33 1.27) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 0) (end -1.33 -1.33) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 -1.33) (end 0 -1.33) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -1.8) (end -1.8 6.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.8 6.85) (end 1.8 6.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.8 6.85) (end 1.8 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.8 -1.8) (end -1.8 -1.8) (layer F.CrtYd) (width 0.05)) (fp_text user - (at 0 -2.25 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user 3.3V (at -2.75 5 180) (layer F.SilkS) (effects (font (size 0.75 0.75) (thickness 0.1))) ) (pad 3 thru_hole oval (at 0 5.08 90) (size 2.5 1.7) (drill 0.95) (layers *.Cu *.Mask) (net 65 1Wire)) (pad 2 thru_hole oval (at 0 2.54 90) (size 2.5 1.7) (drill 0.95) (layers *.Cu *.Mask) (net 2 +3V3)) (pad 1 thru_hole roundrect (at 0 0 90) (size 2.5 1.7) (drill 1) (layers *.Cu *.Mask) (roundrect_rratio 0.25) (net 1 GND)) (model ${KISYS3DMOD}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x03_P2.54mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module TestPoint:TestPoint_Pad_D1.5mm (layer F.Cu) (tedit 5FEBA25D) (tstamp 5FECDD01) (at 138.5 93) (descr "SMD pad as test Point, diameter 1.5mm") (tags "test point SMD pad") (attr virtual) (fp_text reference SCL (at 2 0 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value TestPoint_Pad_D1.5mm (at 0 1.75) (layer F.Fab) hide (effects (font (size 1 1) (thickness 0.15))) ) (fp_circle (center 0 0) (end 0 0.95) (layer F.SilkS) (width 0.12)) (fp_circle (center 0 0) (end 1.25 0) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 -1.65) (layer F.Fab) hide (effects (font (size 1 1) (thickness 0.15))) ) (pad "" smd circle (at 0 0) (size 1.5 1.5) (layers F.Cu F.Mask) (net 49 SCL_5V)) ) (module TestPoint:TestPoint_Pad_D1.5mm (layer F.Cu) (tedit 5FEBA256) (tstamp 5FECDCE4) (at 134.25 93) (descr "SMD pad as test Point, diameter 1.5mm") (tags "test point SMD pad") (attr virtual) (fp_text reference SDA (at 2 0 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value TestPoint_Pad_D1.5mm (at 0 1.75) (layer F.Fab) hide (effects (font (size 1 1) (thickness 0.15))) ) (fp_circle (center 0 0) (end 0 0.95) (layer F.SilkS) (width 0.12)) (fp_circle (center 0 0) (end 1.25 0) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 -1.65) (layer F.Fab) hide (effects (font (size 1 1) (thickness 0.15))) ) (pad "" smd circle (at 0 0) (size 1.5 1.5) (layers F.Cu F.Mask) (net 48 SDA_5V)) ) (module Module:Raspberry_Pi_Zero_Socketed_THT_FaceDown_MountingHoles (layer B.Cu) (tedit 5FE91971) (tstamp 5FE90F8F) (at 157.48 92.71 180) (descr "Raspberry Pi Zero using through hole straight pin socket, 2x20, 2.54mm pitch, https://www.raspberrypi.org/documentation/hardware/raspberrypi/mechanical/rpi_MECH_Zero_1p2.pdf") (tags "raspberry pi zero through hole") (path /5FE8F90C) (fp_text reference J1 (at 2.73 -48.79 180) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value Raspberry_Pi_2_3 (at 10.23 -24.13 90) (layer B.Fab) hide (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start 27.03 -41.63) (end 25.23 -41.63) (layer B.Fab) (width 0.1)) (fp_line (start 27.03 -49.63) (end 27.03 -41.63) (layer B.Fab) (width 0.1)) (fp_line (start 25.23 -49.63) (end 27.03 -49.63) (layer B.Fab) (width 0.1)) (fp_line (start 25.23 1.62) (end 25.23 5.37) (layer B.Fab) (width 0.1)) (fp_line (start 25.93 -9.68) (end 25.93 1.62) (layer B.Fab) (width 0.1)) (fp_line (start 25.23 -9.68) (end 25.93 -9.68) (layer B.Fab) (width 0.1)) (fp_line (start 25.23 1.62) (end 25.93 1.62) (layer B.Fab) (width 0.1)) (fp_line (start 19.23 -56.88) (end 25.48 -56.88) (layer B.CrtYd) (width 0.05)) (fp_line (start -5.02 -56.88) (end 1.23 -56.88) (layer B.CrtYd) (width 0.05)) (fp_line (start 25.48 -50.13) (end 25.48 -56.88) (layer B.CrtYd) (width 0.05)) (fp_line (start 25.48 -37.53) (end 25.48 -41.13) (layer B.CrtYd) (width 0.05)) (fp_line (start 25.48 2.12) (end 25.48 8.62) (layer B.CrtYd) (width 0.05)) (fp_line (start -5.02 8.62) (end 25.48 8.62) (layer B.CrtYd) (width 0.05)) (fp_line (start 25.48 -28.53) (end 25.48 -10.18) (layer B.CrtYd) (width 0.05)) (fp_line (start -5.02 -56.88) (end -5.02 8.62) (layer B.CrtYd) (width 0.05)) (fp_line (start 19.23 -58.33) (end 1.23 -58.33) (layer B.CrtYd) (width 0.05)) (fp_line (start 19.23 -58.33) (end 19.23 -56.88) (layer B.CrtYd) (width 0.05)) (fp_line (start 1.23 -58.33) (end 1.23 -56.88) (layer B.CrtYd) (width 0.05)) (fp_line (start 26.43 2.12) (end 26.43 -10.18) (layer B.CrtYd) (width 0.05)) (fp_line (start 26.43 2.12) (end 25.48 2.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 26.43 -10.18) (end 25.48 -10.18) (layer B.CrtYd) (width 0.05)) (fp_line (start 27.53 -28.53) (end 25.48 -28.53) (layer B.CrtYd) (width 0.05)) (fp_line (start 27.53 -37.53) (end 27.53 -28.53) (layer B.CrtYd) (width 0.05)) (fp_line (start 27.53 -37.53) (end 25.48 -37.53) (layer B.CrtYd) (width 0.05)) (fp_line (start 27.53 -50.13) (end 27.53 -41.13) (layer B.CrtYd) (width 0.05)) (fp_line (start 27.53 -41.13) (end 25.48 -41.13) (layer B.CrtYd) (width 0.05)) (fp_line (start 27.53 -50.13) (end 25.48 -50.13) (layer B.CrtYd) (width 0.05)) (fp_line (start -4.83 -53.63) (end -4.83 5.37) (layer B.SilkS) (width 0.12)) (fp_line (start -1.77 8.43) (end 22.23 8.43) (layer B.SilkS) (width 0.12)) (fp_line (start 25.29 -53.63) (end 25.29 -49.69) (layer B.SilkS) (width 0.12)) (fp_line (start 18.79 -56.69) (end 22.23 -56.69) (layer B.SilkS) (width 0.12)) (fp_line (start 1.27 0.27) (end 1.27 -49.53) (layer B.Fab) (width 0.1)) (fp_line (start -3.81 1.27) (end 0.27 1.27) (layer B.Fab) (width 0.1)) (fp_line (start 0.27 1.27) (end 1.27 0.27) (layer B.Fab) (width 0.1)) (fp_line (start -3.87 -49.59) (end 1.33 -49.59) (layer B.SilkS) (width 0.12)) (fp_line (start 1.33 -1.27) (end 1.33 -49.59) (layer B.SilkS) (width 0.12)) (fp_line (start 1.33 1.33) (end 1.33 0) (layer B.SilkS) (width 0.12)) (fp_line (start 0 1.33) (end 1.33 1.33) (layer B.SilkS) (width 0.12)) (fp_line (start -1.27 -1.27) (end 1.33 -1.27) (layer B.SilkS) (width 0.12)) (fp_line (start -1.27 1.33) (end -1.27 -1.27) (layer B.SilkS) (width 0.12)) (fp_line (start 1.76 -50) (end -4.34 -50) (layer B.CrtYd) (width 0.05)) (fp_line (start -4.34 -50) (end -4.34 1.8) (layer B.CrtYd) (width 0.05)) (fp_line (start -4.34 1.8) (end 1.76 1.8) (layer B.CrtYd) (width 0.05)) (fp_line (start 1.76 1.8) (end 1.76 -50) (layer B.CrtYd) (width 0.05)) (fp_line (start -3.87 1.33) (end -1.27 1.33) (layer B.SilkS) (width 0.12)) (fp_line (start -3.87 1.33) (end -3.87 -49.59) (layer B.SilkS) (width 0.12)) (fp_line (start 1.27 -49.53) (end -3.81 -49.53) (layer B.Fab) (width 0.1)) (fp_line (start -3.81 -49.53) (end -3.81 1.27) (layer B.Fab) (width 0.1)) (fp_line (start -1.77 -56.63) (end 1.73 -56.63) (layer B.Fab) (width 0.1)) (fp_line (start -1.77 8.37) (end 22.23 8.37) (layer B.Fab) (width 0.1)) (fp_line (start -4.77 -53.63) (end -4.77 5.37) (layer B.Fab) (width 0.1)) (fp_line (start 27.03 -29.03) (end 25.23 -29.03) (layer B.Fab) (width 0.1)) (fp_line (start 25.23 -37.03) (end 27.03 -37.03) (layer B.Fab) (width 0.1)) (fp_line (start 27.03 -37.03) (end 27.03 -29.03) (layer B.Fab) (width 0.1)) (fp_line (start 25.23 -49.63) (end 25.23 -53.63) (layer B.Fab) (width 0.1)) (fp_line (start 25.23 -41.63) (end 25.23 -37.03) (layer B.Fab) (width 0.1)) (fp_line (start 25.23 -29.03) (end 25.23 -9.68) (layer B.Fab) (width 0.1)) (fp_line (start 1.73 -56.63) (end 1.73 -57.83) (layer B.Fab) (width 0.1)) (fp_line (start 1.73 -57.83) (end 18.73 -57.83) (layer B.Fab) (width 0.1)) (fp_line (start 18.73 -56.63) (end 18.73 -57.83) (layer B.Fab) (width 0.1)) (fp_line (start 22.23 -56.63) (end 18.73 -56.63) (layer B.Fab) (width 0.1)) (fp_line (start 1.67 -56.69) (end 1.67 -57.89) (layer B.SilkS) (width 0.12)) (fp_line (start 1.67 -57.89) (end 18.79 -57.89) (layer B.SilkS) (width 0.12)) (fp_line (start 18.79 -57.89) (end 18.79 -56.69) (layer B.SilkS) (width 0.12)) (fp_line (start 1.67 -56.69) (end -1.77 -56.69) (layer B.SilkS) (width 0.12)) (fp_line (start 25.29 -49.69) (end 27.09 -49.69) (layer B.SilkS) (width 0.12)) (fp_line (start 27.09 -49.69) (end 27.09 -41.57) (layer B.SilkS) (width 0.12)) (fp_line (start 27.09 -41.57) (end 25.29 -41.57) (layer B.SilkS) (width 0.12)) (fp_line (start 25.29 -37.09) (end 27.09 -37.09) (layer B.SilkS) (width 0.12)) (fp_line (start 27.09 -28.97) (end 25.29 -28.97) (layer B.SilkS) (width 0.12)) (fp_line (start 27.09 -37.09) (end 27.09 -28.97) (layer B.SilkS) (width 0.12)) (fp_line (start 25.29 -41.57) (end 25.29 -37.09) (layer B.SilkS) (width 0.12)) (fp_line (start 25.29 -28.97) (end 25.29 -9.74) (layer B.SilkS) (width 0.12)) (fp_line (start 25.29 -9.74) (end 25.99 -9.74) (layer B.SilkS) (width 0.12)) (fp_line (start 25.99 -9.74) (end 25.99 1.68) (layer B.SilkS) (width 0.12)) (fp_line (start 25.99 1.68) (end 25.29 1.68) (layer B.SilkS) (width 0.12)) (fp_line (start 25.29 1.68) (end 25.29 5.37) (layer B.SilkS) (width 0.12)) (fp_text user %R (at -1.27 -24.13 270) (layer B.Fab) hide (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_arc (start -1.77 -53.63) (end -1.77 -56.63) (angle -90) (layer B.Fab) (width 0.1)) (fp_arc (start -1.77 5.37) (end -4.77 5.37) (angle -90) (layer B.Fab) (width 0.1)) (fp_arc (start 22.23 5.37) (end 22.23 8.37) (angle -90) (layer B.Fab) (width 0.1)) (fp_arc (start 22.23 -53.63) (end 25.29 -53.63) (angle -90) (layer B.SilkS) (width 0.12)) (fp_arc (start -1.77 -53.63) (end -1.77 -56.69) (angle -90) (layer B.SilkS) (width 0.12)) (fp_arc (start -1.77 5.37) (end -4.83 5.37) (angle -90) (layer B.SilkS) (width 0.12)) (fp_arc (start 22.23 -53.63) (end 25.23 -53.63) (angle -90) (layer B.Fab) (width 0.1)) (fp_arc (start 22.23 5.37) (end 22.23 8.43) (angle -90) (layer B.SilkS) (width 0.12)) (pad "" np_thru_hole circle (at -1.27 -53.13 90) (size 2.75 2.75) (drill 2.75) (layers *.Cu *.Mask) (solder_mask_margin 1.625)) (pad "" np_thru_hole circle (at 21.73 4.87 90) (size 2.75 2.75) (drill 2.75) (layers *.Cu *.Mask) (solder_mask_margin 1.625)) (pad "" np_thru_hole circle (at 21.73 -53.13 90) (size 2.75 2.75) (drill 2.75) (layers *.Cu *.Mask) (solder_mask_margin 1.625)) (pad "" np_thru_hole circle (at -1.27 4.87 90) (size 2.75 2.75) (drill 2.75) (layers *.Cu *.Mask) (solder_mask_margin 1.625)) (pad 40 thru_hole oval (at -2.54 -48.26 180) (size 2.25 2) (drill 1 (offset -0.25 0)) (layers *.Cu *.Mask) (net 4 "Net-(J1-Pad40)")) (pad 39 thru_hole oval (at 0 -48.26 180) (size 2.25 2) (drill 1 (offset 0.25 0)) (layers *.Cu *.Mask) (net 5 "Net-(J1-Pad39)")) (pad 26 thru_hole oval (at -2.54 -30.48 180) (size 2.25 2) (drill 1 (offset -0.25 0)) (layers *.Cu *.Mask) (net 6 "Net-(J1-Pad26)")) (pad 25 thru_hole oval (at 0 -30.48 180) (size 2.25 2) (drill 1 (offset 0.25 0)) (layers *.Cu *.Mask) (net 1 GND)) (pad 22 thru_hole oval (at -2.54 -25.4 180) (size 2.25 2) (drill 1 (offset -0.25 0)) (layers *.Cu *.Mask) (net 7 "Net-(J1-Pad22)")) (pad 21 thru_hole oval (at 0 -25.4 180) (size 2.25 2) (drill 1 (offset 0.25 0)) (layers *.Cu *.Mask) (net 8 "Net-(J1-Pad21)")) (pad 30 thru_hole oval (at -2.54 -35.56 180) (size 2.25 2) (drill 1 (offset -0.25 0)) (layers *.Cu *.Mask) (net 9 "Net-(J1-Pad30)")) (pad 29 thru_hole oval (at 0 -35.56 180) (size 2.25 2) (drill 1 (offset 0.25 0)) (layers *.Cu *.Mask) (net 65 1Wire)) (pad 8 thru_hole oval (at -2.54 -7.62 180) (size 2.25 2) (drill 1 (offset -0.25 0)) (layers *.Cu *.Mask) (net 10 "Net-(J1-Pad8)")) (pad 7 thru_hole oval (at 0 -7.62 180) (size 2.25 2) (drill 1 (offset 0.25 0)) (layers *.Cu *.Mask) (net 11 "Net-(J1-Pad7)")) (pad 32 thru_hole oval (at -2.54 -38.1 180) (size 2.25 2) (drill 1 (offset -0.25 0)) (layers *.Cu *.Mask) (net 12 "Net-(J1-Pad32)")) (pad 31 thru_hole oval (at 0 -38.1 180) (size 2.25 2) (drill 1 (offset 0.25 0)) (layers *.Cu *.Mask) (net 13 "Net-(J1-Pad31)")) (pad 18 thru_hole oval (at -2.54 -20.32 180) (size 2.25 2) (drill 1 (offset -0.25 0)) (layers *.Cu *.Mask) (net 14 "Net-(J1-Pad18)")) (pad 17 thru_hole oval (at 0 -20.32 180) (size 2.25 2) (drill 1 (offset 0.25 0)) (layers *.Cu *.Mask) (net 2 +3V3)) (pad 36 thru_hole oval (at -2.54 -43.18 180) (size 2.25 2) (drill 1 (offset -0.25 0)) (layers *.Cu *.Mask) (net 15 "Net-(J1-Pad36)")) (pad 35 thru_hole oval (at 0 -43.18 180) (size 2.25 2) (drill 1 (offset 0.25 0)) (layers *.Cu *.Mask) (net 16 "Net-(J1-Pad35)")) (pad 34 thru_hole oval (at -2.54 -40.64 180) (size 2.25 2) (drill 1 (offset -0.25 0)) (layers *.Cu *.Mask) (net 17 "Net-(J1-Pad34)")) (pad 33 thru_hole oval (at 0 -40.64 180) (size 2.25 2) (drill 1 (offset 0.25 0)) (layers *.Cu *.Mask) (net 18 "Net-(J1-Pad33)")) (pad 38 thru_hole oval (at -2.54 -45.72 180) (size 2.25 2) (drill 1 (offset -0.25 0)) (layers *.Cu *.Mask) (net 19 "Net-(J1-Pad38)")) (pad 37 thru_hole oval (at 0 -45.72 180) (size 2.25 2) (drill 1 (offset 0.25 0)) (layers *.Cu *.Mask) (net 20 "Net-(J1-Pad37)")) (pad 20 thru_hole oval (at -2.54 -22.86 180) (size 2.25 2) (drill 1 (offset -0.25 0)) (layers *.Cu *.Mask) (net 21 "Net-(J1-Pad20)")) (pad 19 thru_hole oval (at 0 -22.86 180) (size 2.25 2) (drill 1 (offset 0.25 0)) (layers *.Cu *.Mask) (net 22 "Net-(J1-Pad19)")) (pad 10 thru_hole oval (at -2.54 -10.16 180) (size 2.25 2) (drill 1 (offset -0.25 0)) (layers *.Cu *.Mask) (net 23 "Net-(J1-Pad10)")) (pad 9 thru_hole oval (at 0 -10.16 180) (size 2.25 2) (drill 1 (offset 0.25 0)) (layers *.Cu *.Mask) (net 24 "Net-(J1-Pad9)")) (pad 14 thru_hole oval (at -2.54 -15.24 180) (size 2.25 2) (drill 1 (offset -0.25 0)) (layers *.Cu *.Mask) (net 25 "Net-(J1-Pad14)")) (pad 13 thru_hole oval (at 0 -15.24 180) (size 2.25 2) (drill 1 (offset 0.25 0)) (layers *.Cu *.Mask) (net 26 OUT2)) (pad 28 thru_hole oval (at -2.54 -33.02 180) (size 2.25 2) (drill 1 (offset -0.25 0)) (layers *.Cu *.Mask) (net 27 "Net-(J1-Pad28)")) (pad 27 thru_hole oval (at 0 -33.02 180) (size 2.25 2) (drill 1 (offset 0.25 0)) (layers *.Cu *.Mask) (net 28 "Net-(J1-Pad27)")) (pad 12 thru_hole oval (at -2.54 -12.7 180) (size 2.25 2) (drill 1 (offset -0.25 0)) (layers *.Cu *.Mask) (net 29 "Net-(J1-Pad12)")) (pad 11 thru_hole oval (at 0 -12.7 180) (size 2.25 2) (drill 1 (offset 0.25 0)) (layers *.Cu *.Mask) (net 36 OUT3)) (pad 24 thru_hole oval (at -2.54 -27.94 180) (size 2.25 2) (drill 1 (offset -0.25 0)) (layers *.Cu *.Mask) (net 31 "Net-(J1-Pad24)")) (pad 23 thru_hole oval (at 0 -27.94 180) (size 2.25 2) (drill 1 (offset 0.25 0)) (layers *.Cu *.Mask) (net 32 "Net-(J1-Pad23)")) (pad 1 thru_hole rect (at 0 0 180) (size 2 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 +3V3)) (pad 2 thru_hole oval (at -2.54 0 180) (size 2.25 2) (drill 1 (offset -0.25 0)) (layers *.Cu *.Mask) (net 3 +5V)) (pad 5 thru_hole oval (at 0 -5.08 180) (size 2.25 2) (drill 1 (offset 0.25 0)) (layers *.Cu *.Mask) (net 33 SCL)) (pad 4 thru_hole oval (at -2.54 -2.54 180) (size 2.25 2) (drill 1 (offset -0.25 0)) (layers *.Cu *.Mask) (net 34 "Net-(J1-Pad4)")) (pad 16 thru_hole oval (at -2.54 -17.78 180) (size 2.25 2) (drill 1 (offset -0.25 0)) (layers *.Cu *.Mask) (net 35 "Net-(J1-Pad16)")) (pad 15 thru_hole oval (at 0 -17.78 180) (size 2.25 2) (drill 1 (offset 0.25 0)) (layers *.Cu *.Mask) (net 30 OUT1)) (pad 3 thru_hole oval (at 0 -2.54 180) (size 2.25 2) (drill 1 (offset 0.25 0)) (layers *.Cu *.Mask) (net 37 SDA)) (pad 6 thru_hole oval (at -2.54 -5.08 180) (size 2.25 2) (drill 1 (offset -0.25 0)) (layers *.Cu *.Mask) (net 60 "Net-(J1-Pad6)")) (model ${KISYS3DMOD}/Module.3dshapes/Raspberry_Pi_Zero_Socketed_THT_FaceDown_MountingHoles.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer F.Cu) (tedit 5F68FEEE) (tstamp 5FEC445C) (at 134 112.2 90) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FFA7C63) (attr smd) (fp_text reference R24 (at 3.45 0 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 200k (at -4.3 0 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 2.45 1.12) (end -2.45 1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.45 -1.12) (end 2.45 1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.45 -1.12) (end 2.45 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.45 1.12) (end -2.45 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer F.SilkS) (width 0.12)) (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer F.SilkS) (width 0.12)) (fp_line (start 1.6 0.8) (end -1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end -1.6 -0.8) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.8 0.8) (thickness 0.12))) ) (pad 2 smd roundrect (at 1.55 0 90) (size 1.3 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.192308) (net 64 "Net-(C3-Pad1)")) (pad 1 smd roundrect (at -1.55 0 90) (size 1.3 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.192308) (net 3 +5V)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder (layer F.Cu) (tedit 5F68FEEF) (tstamp 5FE90F09) (at 137 109.7125 270) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (path /5FEDE3ED) (attr smd) (fp_text reference C3 (at 4.7875 0 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100nF (at 4.2875 0 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.88 0.98) (end -1.88 0.98) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.88 -0.98) (end 1.88 0.98) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.88 -0.98) (end 1.88 -0.98) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.88 0.98) (end -1.88 -0.98) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 2 smd roundrect (at 1.0375 0 270) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.212766) (net 1 GND)) (pad 1 smd roundrect (at -1.0375 0 270) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.212766) (net 64 "Net-(C3-Pad1)")) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder (layer F.Cu) (tedit 5F68FEEF) (tstamp 5FE90EF8) (at 152.75 143.75 90) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (path /6007ADE0) (attr smd) (fp_text reference C2 (at 0 2 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100nF (at 4 0 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.88 0.98) (end -1.88 0.98) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.88 -0.98) (end 1.88 0.98) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.88 -0.98) (end 1.88 -0.98) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.88 0.98) (end -1.88 -0.98) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 2 smd roundrect (at 1.0375 0 90) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.212766) (net 1 GND)) (pad 1 smd roundrect (at -1.0375 0 90) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.212766) (net 3 +5V)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder (layer F.Cu) (tedit 5F68FEEF) (tstamp 5FE90EE7) (at 139.25 109.75 270) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (path /5FEDF0F5) (attr smd) (fp_text reference C1 (at 4.75 0 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100nF (at 4.25 0 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.88 0.98) (end -1.88 0.98) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.88 -0.98) (end 1.88 0.98) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.88 -0.98) (end 1.88 -0.98) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.88 0.98) (end -1.88 -0.98) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 2 smd roundrect (at 1.0375 0 270) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.212766) (net 1 GND)) (pad 1 smd roundrect (at -1.0375 0 270) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.212766) (net 2 +3V3)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical (layer F.Cu) (tedit 5C28146C) (tstamp 5FEA7AEB) (at 149.5 110.25 180) (descr "JST XH series connector, B3B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH vertical") (path /5FE966B7) (fp_text reference J2 (at 2.5 -3.55) (layer F.SilkS) hide (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value OUT1 (at 10.5 20.75 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify left)) ) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 7.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start 7.45 3.4) (end 7.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 7.45 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 7.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 7.56 3.51) (end 7.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 7.56 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 7.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.95 3.9) (end 7.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.95 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 4.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -1.7) (end 4.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -2.45) (end 5.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -1.7) (end 7.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -1.7) (end 7.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -2.45) (end 5.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -0.2) (end 6.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 -0.2) (end 6.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 2.5 2.7) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 3 thru_hole oval (at 5 0 180) (size 1.7 2.5) (drill 0.95) (layers *.Cu *.Mask) (net 38 "Net-(J2-Pad3)")) (pad 2 thru_hole oval (at 2.5 0 180) (size 1.7 2.5) (drill 0.95) (layers *.Cu *.Mask) (net 3 +5V)) (pad 1 thru_hole roundrect (at 0 0 180) (size 1.7 2.5) (drill 0.95) (layers *.Cu *.Mask) (roundrect_rratio 0.147) (net 1 GND)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder (layer F.Cu) (tedit 5F68FEEE) (tstamp 5FEA579B) (at 154 105.5) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FEB88FC) (attr smd) (fp_text reference R19 (at -1.25 9.25) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify left)) ) (fp_text value 1k (at 3 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 2 smd roundrect (at 1 0) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2083325) (net 36 OUT3)) (pad 1 smd roundrect (at -1 0) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2083325) (net 63 "Net-(R19-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder (layer F.Cu) (tedit 5F68FEEE) (tstamp 5FEA578A) (at 154 108) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FEB85BC) (attr smd) (fp_text reference R18 (at -1.25 8.25) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify left)) ) (fp_text value 1k (at 3 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 2 smd roundrect (at 1 0) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2083325) (net 26 OUT2)) (pad 1 smd roundrect (at -1 0) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2083325) (net 62 "Net-(R18-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder (layer F.Cu) (tedit 5F68FEEE) (tstamp 5FEB4F96) (at 154 110.5) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FEB6E06) (attr smd) (fp_text reference R17 (at -1.25 7.25) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify left)) ) (fp_text value 1k (at 3 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 2 smd roundrect (at 1 0) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2083325) (net 30 OUT1)) (pad 1 smd roundrect (at -1 0) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2083325) (net 61 "Net-(R17-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_TO_SOT_SMD:SOT-23-8 (layer F.Cu) (tedit 5FEBA82F) (tstamp 5FE91217) (at 148.5 143.75 270) (descr "8-pin SOT-23 package, http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/sot-23rj/rj_8.pdf") (tags SOT-23-8) (path /5FE93377) (attr smd) (fp_text reference U2 (at -3 0 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value MAX11600 (at 0 6 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.9 1.61) (end 0.9 1.61) (layer F.SilkS) (width 0.12)) (fp_line (start 0.9 -1.61) (end -1.55 -1.61) (layer F.SilkS) (width 0.12)) (fp_line (start 1.9 -1.8) (end -1.9 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.9 1.8) (end 1.9 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.9 1.8) (end 1.9 1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.9 -1.8) (end -1.9 1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.9 -0.9) (end -0.25 -1.55) (layer F.Fab) (width 0.1)) (fp_line (start 0.9 -1.55) (end -0.25 -1.55) (layer F.Fab) (width 0.1)) (fp_line (start -0.9 -0.9) (end -0.9 1.55) (layer F.Fab) (width 0.1)) (fp_line (start 0.9 1.55) (end -0.9 1.55) (layer F.Fab) (width 0.1)) (fp_line (start 0.9 -1.55) (end 0.9 1.55) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.075))) ) (pad 8 smd rect (at 1.1 -0.98 270) (size 1.26 0.4) (drill (offset 0.1 0)) (layers F.Cu F.Paste F.Mask) (net 3 +5V)) (pad 7 smd rect (at 1.1 -0.33 270) (size 1.26 0.4) (drill (offset 0.1 0)) (layers F.Cu F.Paste F.Mask) (net 1 GND)) (pad 6 smd rect (at 1.1 0.33 270) (size 1.26 0.4) (drill (offset 0.1 0)) (layers F.Cu F.Paste F.Mask) (net 48 SDA_5V)) (pad 5 smd rect (at 1.1 0.98 270) (size 1.26 0.4) (drill (offset 0.1 0)) (layers F.Cu F.Paste F.Mask) (net 49 SCL_5V)) (pad 4 smd rect (at -1.1 0.98 270) (size 1.26 0.4) (drill (offset -0.1 0)) (layers F.Cu F.Paste F.Mask) (net 53 "Net-(R15-Pad2)")) (pad 3 smd rect (at -1.1 0.33 270) (size 1.26 0.4) (drill (offset -0.1 0)) (layers F.Cu F.Paste F.Mask) (net 52 "Net-(R13-Pad2)")) (pad 2 smd rect (at -1.1 -0.33 270) (size 1.26 0.4) (drill (offset -0.1 0)) (layers F.Cu F.Paste F.Mask) (net 51 "Net-(R11-Pad2)")) (pad 1 smd rect (at -1.1 -0.98 270) (size 1.26 0.4) (drill (offset -0.1 0)) (layers F.Cu F.Paste F.Mask) (net 50 "Net-(R10-Pad1)")) (model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-23-8.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm (layer F.Cu) (tedit 5FEBA79C) (tstamp 5FE911FF) (at 137 100.5 180) (descr "TSSOP, 20 Pin (JEDEC MO-153 Var AC https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py") (tags "TSSOP SO") (path /5FEC7EE2) (attr smd) (fp_text reference U1 (at 2.5 -4.5) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value LSF0108 (at 0.25 -4.5) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 0 3.385) (end 2.2 3.385) (layer F.SilkS) (width 0.12)) (fp_line (start 0 3.385) (end -2.2 3.385) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -3.385) (end 2.2 -3.385) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -3.385) (end -3.6 -3.385) (layer F.SilkS) (width 0.12)) (fp_line (start -1.2 -3.25) (end 2.2 -3.25) (layer F.Fab) (width 0.1)) (fp_line (start 2.2 -3.25) (end 2.2 3.25) (layer F.Fab) (width 0.1)) (fp_line (start 2.2 3.25) (end -2.2 3.25) (layer F.Fab) (width 0.1)) (fp_line (start -2.2 3.25) (end -2.2 -2.25) (layer F.Fab) (width 0.1)) (fp_line (start -2.2 -2.25) (end -1.2 -3.25) (layer F.Fab) (width 0.1)) (fp_line (start -3.85 -3.5) (end -3.85 3.5) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.85 3.5) (end 3.85 3.5) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.85 3.5) (end 3.85 -3.5) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.85 -3.5) (end -3.85 -3.5) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 20 smd roundrect (at 2.8625 -2.925 180) (size 1.7 0.4) (drill (offset 0.1 0)) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 64 "Net-(C3-Pad1)")) (pad 19 smd roundrect (at 2.8625 -2.275 180) (size 1.7 0.4) (drill (offset 0.1 0)) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 64 "Net-(C3-Pad1)")) (pad 18 smd roundrect (at 2.8625 -1.625 180) (size 1.7 0.4) (drill (offset 0.1 0)) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 45 "Net-(R4-Pad2)")) (pad 17 smd roundrect (at 2.8625 -0.975 180) (size 1.7 0.4) (drill (offset 0.1 0)) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 46 "Net-(R5-Pad2)")) (pad 16 smd roundrect (at 2.8625 -0.325 180) (size 1.7 0.4) (drill (offset 0.1 0)) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 47 "Net-(R6-Pad2)")) (pad 15 smd roundrect (at 2.8625 0.325 180) (size 1.7 0.4) (drill (offset 0.1 0)) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 54 "Net-(U1-Pad15)")) (pad 14 smd roundrect (at 2.8625 0.975 180) (size 1.7 0.4) (drill (offset 0.1 0)) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 55 "Net-(U1-Pad14)")) (pad 13 smd roundrect (at 2.8625 1.625 180) (size 1.7 0.4) (drill (offset 0.1 0)) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 56 "Net-(U1-Pad13)")) (pad 12 smd roundrect (at 2.8625 2.275 180) (size 1.7 0.4) (drill (offset 0.1 0)) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 49 SCL_5V)) (pad 11 smd roundrect (at 2.8625 2.925 180) (size 1.7 0.4) (drill (offset 0.1 0)) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 48 SDA_5V)) (pad 10 smd roundrect (at -2.8625 2.925 180) (size 1.7 0.4) (drill (offset -0.1 0)) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 37 SDA)) (pad 9 smd roundrect (at -2.8625 2.275 180) (size 1.7 0.4) (drill (offset -0.1 0)) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 33 SCL)) (pad 8 smd roundrect (at -2.8625 1.625 180) (size 1.7 0.4) (drill (offset -0.1 0)) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 57 "Net-(U1-Pad8)")) (pad 7 smd roundrect (at -2.8625 0.975 180) (size 1.7 0.4) (drill (offset -0.1 0)) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 58 "Net-(U1-Pad7)")) (pad 6 smd roundrect (at -2.8625 0.325 180) (size 1.7 0.4) (drill (offset -0.1 0)) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 59 "Net-(U1-Pad6)")) (pad 5 smd roundrect (at -2.8625 -0.325 180) (size 1.7 0.4) (drill (offset -0.1 0)) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 63 "Net-(R19-Pad1)")) (pad 4 smd roundrect (at -2.8625 -0.975 180) (size 1.7 0.4) (drill (offset -0.1 0)) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 62 "Net-(R18-Pad1)")) (pad 3 smd roundrect (at -2.8625 -1.625 180) (size 1.7 0.4) (drill (offset -0.1 0)) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 61 "Net-(R17-Pad1)")) (pad 2 smd roundrect (at -2.8625 -2.275 180) (size 1.7 0.4) (drill (offset -0.1 0)) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +3V3)) (pad 1 smd roundrect (at -2.8625 -2.925 180) (size 1.7 0.4) (drill (offset -0.1 0)) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (model ${KISYS3DMOD}/Package_SO.3dshapes/TSSOP-20_4.4x6.5mm_P0.65mm.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 5FE911D9) (at 137 138.95 270) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FF536C2) (attr smd) (fp_text reference R16 (at -2.95 0.5) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 33k (at -3.95 0 270) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 270) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 2 smd roundrect (at 1.55 0 270) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923) (net 1 GND)) (pad 1 smd roundrect (at -1.55 0 270) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923) (net 53 "Net-(R15-Pad2)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 5FE911C8) (at 139.5 138.95 90) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FFD3887) (attr smd) (fp_text reference R15 (at 2.95 0.5) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 10k (at 3.95 0 90) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 -90) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 2 smd roundrect (at 1.55 0 90) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923) (net 53 "Net-(R15-Pad2)")) (pad 1 smd roundrect (at -1.55 0 90) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923) (net 42 "Net-(J6-Pad3)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 5FE911B7) (at 147.5 138.95 270) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FF535AC) (attr smd) (fp_text reference R14 (at -2.95 0.5) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 33k (at -3.7 0 90) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 270) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 2 smd roundrect (at 1.55 0 270) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923) (net 1 GND)) (pad 1 smd roundrect (at -1.55 0 270) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923) (net 52 "Net-(R13-Pad2)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 5FE9BE50) (at 150 138.95 90) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FFD387D) (attr smd) (fp_text reference R13 (at 2.95 0.5) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 10k (at 3.7 0 90) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 -90) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 2 smd roundrect (at 1.55 0 90) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923) (net 52 "Net-(R13-Pad2)")) (pad 1 smd roundrect (at -1.55 0 90) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923) (net 41 "Net-(J5-Pad3)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 5FE91195) (at 137 119.95 90) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FF5334F) (attr smd) (fp_text reference R12 (at 2.95 -0.5) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 33k (at -3.8 0 90) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 -90) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 2 smd roundrect (at 1.55 0 90) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923) (net 1 GND)) (pad 1 smd roundrect (at -1.55 0 90) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923) (net 51 "Net-(R11-Pad2)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 5FE91184) (at 139.5 119.95 270) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FFD3873) (attr smd) (fp_text reference R11 (at -2.95 -0.5) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 10k (at 3.8 0 90) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 270) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 2 smd roundrect (at 1.55 0 270) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923) (net 51 "Net-(R11-Pad2)")) (pad 1 smd roundrect (at -1.55 0 270) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923) (net 44 "Net-(J8-Pad3)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 5FE91173) (at 147.5 119.95 90) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FE97787) (attr smd) (fp_text reference R10 (at 1.45 -2.75 180) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 33k (at -3.8 0 90) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 -90) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 2 smd roundrect (at 1.55 0 90) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923) (net 1 GND)) (pad 1 smd roundrect (at -1.55 0 90) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923) (net 50 "Net-(R10-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 5FE91162) (at 150 119.95 270) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FFD353F) (attr smd) (fp_text reference R9 (at -1.45 -2.5) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 10k (at 3.8 0 90) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 270) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 2 smd roundrect (at 1.55 0 270) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923) (net 50 "Net-(R10-Pad1)")) (pad 1 smd roundrect (at -1.55 0 270) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923) (net 43 "Net-(J7-Pad3)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder (layer F.Cu) (tedit 5F68FEEE) (tstamp 5FE91151) (at 143 146.5 90) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FEFC15C) (attr smd) (fp_text reference R8 (at -1 -2.25 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1.5k (at 0 -2.25 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 2 smd roundrect (at 1 0 90) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2083325) (net 49 SCL_5V)) (pad 1 smd roundrect (at -1 0 90) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2083325) (net 3 +5V)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder (layer F.Cu) (tedit 5F68FEEE) (tstamp 5FE91140) (at 145.25 146.5 90) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FEFC721) (attr smd) (fp_text reference R7 (at -1 2 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1.5k (at 0 2 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 2 smd roundrect (at 1 0 90) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2083325) (net 48 SDA_5V)) (pad 1 smd roundrect (at -1 0 90) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2083325) (net 3 +5V)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 5FEA7A27) (at 142.95 98.75 180) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FE9A420) (attr smd) (fp_text reference R6 (at -3.55 0) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 330 (at -3.8 0) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 2 smd roundrect (at 1.55 0 180) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923) (net 47 "Net-(R6-Pad2)")) (pad 1 smd roundrect (at -1.55 0 180) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923) (net 40 "Net-(J4-Pad3)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 5FEA7A57) (at 142.95 106 180) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FE9A1A1) (attr smd) (fp_text reference R5 (at -3.55 0) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 330 (at -3.8 0) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 2 smd roundrect (at 1.55 0 180) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923) (net 46 "Net-(R5-Pad2)")) (pad 1 smd roundrect (at -1.55 0 180) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923) (net 39 "Net-(J3-Pad3)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 5FEAF073) (at 142.95 113.25 180) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FE998CA) (attr smd) (fp_text reference R4 (at -3.55 0) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 330 (at -3.8 0) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 2 smd roundrect (at 1.55 0 180) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923) (net 45 "Net-(R4-Pad2)")) (pad 1 smd roundrect (at -1.55 0 180) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923) (net 38 "Net-(J2-Pad3)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder (layer F.Cu) (tedit 5F68FEEE) (tstamp 5FE910EB) (at 154.25 98.75 90) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FEEB7FB) (attr smd) (fp_text reference R2 (at -2.75 -1 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify left)) ) (fp_text value 1.5k (at -2.5 0 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 2 smd roundrect (at 1 0 90) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2083325) (net 33 SCL)) (pad 1 smd roundrect (at -1 0 90) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2083325) (net 2 +3V3)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder (layer F.Cu) (tedit 5F68FEEE) (tstamp 5FE910DA) (at 154.25 94.25 270) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5FEEB24B) (attr smd) (fp_text reference R1 (at -2.75 1 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify left)) ) (fp_text value 1.5k (at -2.25 0 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 2 smd roundrect (at 1 0 270) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2083325) (net 37 SDA)) (pad 1 smd roundrect (at -1 0 270) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2083325) (net 2 +3V3)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical (layer F.Cu) (tedit 5FE918E0) (tstamp 5FE910C9) (at 136.25 125) (descr "JST PH series connector, B3B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator") (tags "connector JST PH side entry") (path /5FE9509D) (fp_text reference J8 (at 2 -2.9) (layer F.SilkS) hide (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value AIN1 (at -0.5 -3.25 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.06 -1.81) (end -2.06 2.91) (layer F.SilkS) (width 0.12)) (fp_line (start -2.06 2.91) (end 6.06 2.91) (layer F.SilkS) (width 0.12)) (fp_line (start 6.06 2.91) (end 6.06 -1.81) (layer F.SilkS) (width 0.12)) (fp_line (start 6.06 -1.81) (end -2.06 -1.81) (layer F.SilkS) (width 0.12)) (fp_line (start -0.3 -1.81) (end -0.3 -2.01) (layer F.SilkS) (width 0.12)) (fp_line (start -0.3 -2.01) (end -0.6 -2.01) (layer F.SilkS) (width 0.12)) (fp_line (start -0.6 -2.01) (end -0.6 -1.81) (layer F.SilkS) (width 0.12)) (fp_line (start -0.3 -1.91) (end -0.6 -1.91) (layer F.SilkS) (width 0.12)) (fp_line (start 0.5 -1.81) (end 0.5 -1.2) (layer F.SilkS) (width 0.12)) (fp_line (start 0.5 -1.2) (end -1.45 -1.2) (layer F.SilkS) (width 0.12)) (fp_line (start -1.45 -1.2) (end -1.45 2.3) (layer F.SilkS) (width 0.12)) (fp_line (start -1.45 2.3) (end 5.45 2.3) (layer F.SilkS) (width 0.12)) (fp_line (start 5.45 2.3) (end 5.45 -1.2) (layer F.SilkS) (width 0.12)) (fp_line (start 5.45 -1.2) (end 3.5 -1.2) (layer F.SilkS) (width 0.12)) (fp_line (start 3.5 -1.2) (end 3.5 -1.81) (layer F.SilkS) (width 0.12)) (fp_line (start -2.06 -0.5) (end -1.45 -0.5) (layer F.SilkS) (width 0.12)) (fp_line (start -2.06 0.8) (end -1.45 0.8) (layer F.SilkS) (width 0.12)) (fp_line (start 6.06 -0.5) (end 5.45 -0.5) (layer F.SilkS) (width 0.12)) (fp_line (start 6.06 0.8) (end 5.45 0.8) (layer F.SilkS) (width 0.12)) (fp_line (start 0.9 2.3) (end 0.9 1.8) (layer F.SilkS) (width 0.12)) (fp_line (start 0.9 1.8) (end 1.1 1.8) (layer F.SilkS) (width 0.12)) (fp_line (start 1.1 1.8) (end 1.1 2.3) (layer F.SilkS) (width 0.12)) (fp_line (start 1 2.3) (end 1 1.8) (layer F.SilkS) (width 0.12)) (fp_line (start 2.9 2.3) (end 2.9 1.8) (layer F.SilkS) (width 0.12)) (fp_line (start 2.9 1.8) (end 3.1 1.8) (layer F.SilkS) (width 0.12)) (fp_line (start 3.1 1.8) (end 3.1 2.3) (layer F.SilkS) (width 0.12)) (fp_line (start 3 2.3) (end 3 1.8) (layer F.SilkS) (width 0.12)) (fp_line (start -1.11 -2.11) (end -2.36 -2.11) (layer F.SilkS) (width 0.12)) (fp_line (start -2.36 -2.11) (end -2.36 -0.86) (layer F.SilkS) (width 0.12)) (fp_line (start -1.11 -2.11) (end -2.36 -2.11) (layer F.Fab) (width 0.1)) (fp_line (start -2.36 -2.11) (end -2.36 -0.86) (layer F.Fab) (width 0.1)) (fp_line (start -1.95 -1.7) (end -1.95 2.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.95 2.8) (end 5.95 2.8) (layer F.Fab) (width 0.1)) (fp_line (start 5.95 2.8) (end 5.95 -1.7) (layer F.Fab) (width 0.1)) (fp_line (start 5.95 -1.7) (end -1.95 -1.7) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 -2.2) (end -2.45 3.3) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.45 3.3) (end 6.45 3.3) (layer F.CrtYd) (width 0.05)) (fp_line (start 6.45 3.3) (end 6.45 -2.2) (layer F.CrtYd) (width 0.05)) (fp_line (start 6.45 -2.2) (end -2.45 -2.2) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 2 1.5) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 3 thru_hole oval (at 4 0) (size 1.2 2) (drill 0.75) (layers *.Cu *.Mask) (net 44 "Net-(J8-Pad3)")) (pad 2 thru_hole oval (at 2 0) (size 1.2 2) (drill 0.75) (layers *.Cu *.Mask) (net 3 +5V)) (pad 1 thru_hole roundrect (at 0 0) (size 1.2 2) (drill 0.75) (layers *.Cu *.Mask) (roundrect_rratio 0.208) (net 1 GND)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical (layer F.Cu) (tedit 5B7745C2) (tstamp 5FE9109A) (at 146 125) (descr "JST PH series connector, B3B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator") (tags "connector JST PH side entry") (path /5FE95E68) (fp_text reference J7 (at 2 -2.9) (layer F.SilkS) hide (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value AIN0 (at 4.75 -3.25 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.06 -1.81) (end -2.06 2.91) (layer F.SilkS) (width 0.12)) (fp_line (start -2.06 2.91) (end 6.06 2.91) (layer F.SilkS) (width 0.12)) (fp_line (start 6.06 2.91) (end 6.06 -1.81) (layer F.SilkS) (width 0.12)) (fp_line (start 6.06 -1.81) (end -2.06 -1.81) (layer F.SilkS) (width 0.12)) (fp_line (start -0.3 -1.81) (end -0.3 -2.01) (layer F.SilkS) (width 0.12)) (fp_line (start -0.3 -2.01) (end -0.6 -2.01) (layer F.SilkS) (width 0.12)) (fp_line (start -0.6 -2.01) (end -0.6 -1.81) (layer F.SilkS) (width 0.12)) (fp_line (start -0.3 -1.91) (end -0.6 -1.91) (layer F.SilkS) (width 0.12)) (fp_line (start 0.5 -1.81) (end 0.5 -1.2) (layer F.SilkS) (width 0.12)) (fp_line (start 0.5 -1.2) (end -1.45 -1.2) (layer F.SilkS) (width 0.12)) (fp_line (start -1.45 -1.2) (end -1.45 2.3) (layer F.SilkS) (width 0.12)) (fp_line (start -1.45 2.3) (end 5.45 2.3) (layer F.SilkS) (width 0.12)) (fp_line (start 5.45 2.3) (end 5.45 -1.2) (layer F.SilkS) (width 0.12)) (fp_line (start 5.45 -1.2) (end 3.5 -1.2) (layer F.SilkS) (width 0.12)) (fp_line (start 3.5 -1.2) (end 3.5 -1.81) (layer F.SilkS) (width 0.12)) (fp_line (start -2.06 -0.5) (end -1.45 -0.5) (layer F.SilkS) (width 0.12)) (fp_line (start -2.06 0.8) (end -1.45 0.8) (layer F.SilkS) (width 0.12)) (fp_line (start 6.06 -0.5) (end 5.45 -0.5) (layer F.SilkS) (width 0.12)) (fp_line (start 6.06 0.8) (end 5.45 0.8) (layer F.SilkS) (width 0.12)) (fp_line (start 0.9 2.3) (end 0.9 1.8) (layer F.SilkS) (width 0.12)) (fp_line (start 0.9 1.8) (end 1.1 1.8) (layer F.SilkS) (width 0.12)) (fp_line (start 1.1 1.8) (end 1.1 2.3) (layer F.SilkS) (width 0.12)) (fp_line (start 1 2.3) (end 1 1.8) (layer F.SilkS) (width 0.12)) (fp_line (start 2.9 2.3) (end 2.9 1.8) (layer F.SilkS) (width 0.12)) (fp_line (start 2.9 1.8) (end 3.1 1.8) (layer F.SilkS) (width 0.12)) (fp_line (start 3.1 1.8) (end 3.1 2.3) (layer F.SilkS) (width 0.12)) (fp_line (start 3 2.3) (end 3 1.8) (layer F.SilkS) (width 0.12)) (fp_line (start -1.11 -2.11) (end -2.36 -2.11) (layer F.SilkS) (width 0.12)) (fp_line (start -2.36 -2.11) (end -2.36 -0.86) (layer F.SilkS) (width 0.12)) (fp_line (start -1.11 -2.11) (end -2.36 -2.11) (layer F.Fab) (width 0.1)) (fp_line (start -2.36 -2.11) (end -2.36 -0.86) (layer F.Fab) (width 0.1)) (fp_line (start -1.95 -1.7) (end -1.95 2.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.95 2.8) (end 5.95 2.8) (layer F.Fab) (width 0.1)) (fp_line (start 5.95 2.8) (end 5.95 -1.7) (layer F.Fab) (width 0.1)) (fp_line (start 5.95 -1.7) (end -1.95 -1.7) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 -2.2) (end -2.45 3.3) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.45 3.3) (end 6.45 3.3) (layer F.CrtYd) (width 0.05)) (fp_line (start 6.45 3.3) (end 6.45 -2.2) (layer F.CrtYd) (width 0.05)) (fp_line (start 6.45 -2.2) (end -2.45 -2.2) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 2 1.5) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 3 thru_hole oval (at 4 0) (size 1.2 2) (drill 0.75) (layers *.Cu *.Mask) (net 43 "Net-(J7-Pad3)")) (pad 2 thru_hole oval (at 2 0) (size 1.2 2) (drill 0.75) (layers *.Cu *.Mask) (net 3 +5V)) (pad 1 thru_hole roundrect (at 0 0) (size 1.2 2) (drill 0.75) (layers *.Cu *.Mask) (roundrect_rratio 0.208) (net 1 GND)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical (layer F.Cu) (tedit 5B7745C2) (tstamp 5FE9106B) (at 136.25 132.75) (descr "JST PH series connector, B3B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator") (tags "connector JST PH side entry") (path /5FE9619F) (fp_text reference J6 (at 2 -2.9) (layer F.SilkS) hide (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value AIN3 (at -0.75 4.25 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.06 -1.81) (end -2.06 2.91) (layer F.SilkS) (width 0.12)) (fp_line (start -2.06 2.91) (end 6.06 2.91) (layer F.SilkS) (width 0.12)) (fp_line (start 6.06 2.91) (end 6.06 -1.81) (layer F.SilkS) (width 0.12)) (fp_line (start 6.06 -1.81) (end -2.06 -1.81) (layer F.SilkS) (width 0.12)) (fp_line (start -0.3 -1.81) (end -0.3 -2.01) (layer F.SilkS) (width 0.12)) (fp_line (start -0.3 -2.01) (end -0.6 -2.01) (layer F.SilkS) (width 0.12)) (fp_line (start -0.6 -2.01) (end -0.6 -1.81) (layer F.SilkS) (width 0.12)) (fp_line (start -0.3 -1.91) (end -0.6 -1.91) (layer F.SilkS) (width 0.12)) (fp_line (start 0.5 -1.81) (end 0.5 -1.2) (layer F.SilkS) (width 0.12)) (fp_line (start 0.5 -1.2) (end -1.45 -1.2) (layer F.SilkS) (width 0.12)) (fp_line (start -1.45 -1.2) (end -1.45 2.3) (layer F.SilkS) (width 0.12)) (fp_line (start -1.45 2.3) (end 5.45 2.3) (layer F.SilkS) (width 0.12)) (fp_line (start 5.45 2.3) (end 5.45 -1.2) (layer F.SilkS) (width 0.12)) (fp_line (start 5.45 -1.2) (end 3.5 -1.2) (layer F.SilkS) (width 0.12)) (fp_line (start 3.5 -1.2) (end 3.5 -1.81) (layer F.SilkS) (width 0.12)) (fp_line (start -2.06 -0.5) (end -1.45 -0.5) (layer F.SilkS) (width 0.12)) (fp_line (start -2.06 0.8) (end -1.45 0.8) (layer F.SilkS) (width 0.12)) (fp_line (start 6.06 -0.5) (end 5.45 -0.5) (layer F.SilkS) (width 0.12)) (fp_line (start 6.06 0.8) (end 5.45 0.8) (layer F.SilkS) (width 0.12)) (fp_line (start 0.9 2.3) (end 0.9 1.8) (layer F.SilkS) (width 0.12)) (fp_line (start 0.9 1.8) (end 1.1 1.8) (layer F.SilkS) (width 0.12)) (fp_line (start 1.1 1.8) (end 1.1 2.3) (layer F.SilkS) (width 0.12)) (fp_line (start 1 2.3) (end 1 1.8) (layer F.SilkS) (width 0.12)) (fp_line (start 2.9 2.3) (end 2.9 1.8) (layer F.SilkS) (width 0.12)) (fp_line (start 2.9 1.8) (end 3.1 1.8) (layer F.SilkS) (width 0.12)) (fp_line (start 3.1 1.8) (end 3.1 2.3) (layer F.SilkS) (width 0.12)) (fp_line (start 3 2.3) (end 3 1.8) (layer F.SilkS) (width 0.12)) (fp_line (start -1.11 -2.11) (end -2.36 -2.11) (layer F.SilkS) (width 0.12)) (fp_line (start -2.36 -2.11) (end -2.36 -0.86) (layer F.SilkS) (width 0.12)) (fp_line (start -1.11 -2.11) (end -2.36 -2.11) (layer F.Fab) (width 0.1)) (fp_line (start -2.36 -2.11) (end -2.36 -0.86) (layer F.Fab) (width 0.1)) (fp_line (start -1.95 -1.7) (end -1.95 2.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.95 2.8) (end 5.95 2.8) (layer F.Fab) (width 0.1)) (fp_line (start 5.95 2.8) (end 5.95 -1.7) (layer F.Fab) (width 0.1)) (fp_line (start 5.95 -1.7) (end -1.95 -1.7) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 -2.2) (end -2.45 3.3) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.45 3.3) (end 6.45 3.3) (layer F.CrtYd) (width 0.05)) (fp_line (start 6.45 3.3) (end 6.45 -2.2) (layer F.CrtYd) (width 0.05)) (fp_line (start 6.45 -2.2) (end -2.45 -2.2) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 2 1.5) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 3 thru_hole oval (at 4 0) (size 1.2 2) (drill 0.75) (layers *.Cu *.Mask) (net 42 "Net-(J6-Pad3)")) (pad 2 thru_hole oval (at 2 0) (size 1.2 2) (drill 0.75) (layers *.Cu *.Mask) (net 3 +5V)) (pad 1 thru_hole roundrect (at 0 0) (size 1.2 2) (drill 0.75) (layers *.Cu *.Mask) (roundrect_rratio 0.208) (net 1 GND)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical (layer F.Cu) (tedit 5B7745C2) (tstamp 5FE9103C) (at 146 132.75) (descr "JST PH series connector, B3B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator") (tags "connector JST PH side entry") (path /5FE95B4D) (fp_text reference J5 (at 2 -2.9) (layer F.SilkS) hide (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value AIN2 (at 4.75 4.25 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.06 -1.81) (end -2.06 2.91) (layer F.SilkS) (width 0.12)) (fp_line (start -2.06 2.91) (end 6.06 2.91) (layer F.SilkS) (width 0.12)) (fp_line (start 6.06 2.91) (end 6.06 -1.81) (layer F.SilkS) (width 0.12)) (fp_line (start 6.06 -1.81) (end -2.06 -1.81) (layer F.SilkS) (width 0.12)) (fp_line (start -0.3 -1.81) (end -0.3 -2.01) (layer F.SilkS) (width 0.12)) (fp_line (start -0.3 -2.01) (end -0.6 -2.01) (layer F.SilkS) (width 0.12)) (fp_line (start -0.6 -2.01) (end -0.6 -1.81) (layer F.SilkS) (width 0.12)) (fp_line (start -0.3 -1.91) (end -0.6 -1.91) (layer F.SilkS) (width 0.12)) (fp_line (start 0.5 -1.81) (end 0.5 -1.2) (layer F.SilkS) (width 0.12)) (fp_line (start 0.5 -1.2) (end -1.45 -1.2) (layer F.SilkS) (width 0.12)) (fp_line (start -1.45 -1.2) (end -1.45 2.3) (layer F.SilkS) (width 0.12)) (fp_line (start -1.45 2.3) (end 5.45 2.3) (layer F.SilkS) (width 0.12)) (fp_line (start 5.45 2.3) (end 5.45 -1.2) (layer F.SilkS) (width 0.12)) (fp_line (start 5.45 -1.2) (end 3.5 -1.2) (layer F.SilkS) (width 0.12)) (fp_line (start 3.5 -1.2) (end 3.5 -1.81) (layer F.SilkS) (width 0.12)) (fp_line (start -2.06 -0.5) (end -1.45 -0.5) (layer F.SilkS) (width 0.12)) (fp_line (start -2.06 0.8) (end -1.45 0.8) (layer F.SilkS) (width 0.12)) (fp_line (start 6.06 -0.5) (end 5.45 -0.5) (layer F.SilkS) (width 0.12)) (fp_line (start 6.06 0.8) (end 5.45 0.8) (layer F.SilkS) (width 0.12)) (fp_line (start 0.9 2.3) (end 0.9 1.8) (layer F.SilkS) (width 0.12)) (fp_line (start 0.9 1.8) (end 1.1 1.8) (layer F.SilkS) (width 0.12)) (fp_line (start 1.1 1.8) (end 1.1 2.3) (layer F.SilkS) (width 0.12)) (fp_line (start 1 2.3) (end 1 1.8) (layer F.SilkS) (width 0.12)) (fp_line (start 2.9 2.3) (end 2.9 1.8) (layer F.SilkS) (width 0.12)) (fp_line (start 2.9 1.8) (end 3.1 1.8) (layer F.SilkS) (width 0.12)) (fp_line (start 3.1 1.8) (end 3.1 2.3) (layer F.SilkS) (width 0.12)) (fp_line (start 3 2.3) (end 3 1.8) (layer F.SilkS) (width 0.12)) (fp_line (start -1.11 -2.11) (end -2.36 -2.11) (layer F.SilkS) (width 0.12)) (fp_line (start -2.36 -2.11) (end -2.36 -0.86) (layer F.SilkS) (width 0.12)) (fp_line (start -1.11 -2.11) (end -2.36 -2.11) (layer F.Fab) (width 0.1)) (fp_line (start -2.36 -2.11) (end -2.36 -0.86) (layer F.Fab) (width 0.1)) (fp_line (start -1.95 -1.7) (end -1.95 2.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.95 2.8) (end 5.95 2.8) (layer F.Fab) (width 0.1)) (fp_line (start 5.95 2.8) (end 5.95 -1.7) (layer F.Fab) (width 0.1)) (fp_line (start 5.95 -1.7) (end -1.95 -1.7) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 -2.2) (end -2.45 3.3) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.45 3.3) (end 6.45 3.3) (layer F.CrtYd) (width 0.05)) (fp_line (start 6.45 3.3) (end 6.45 -2.2) (layer F.CrtYd) (width 0.05)) (fp_line (start 6.45 -2.2) (end -2.45 -2.2) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 2 1.5) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 3 thru_hole oval (at 4 0) (size 1.2 2) (drill 0.75) (layers *.Cu *.Mask) (net 41 "Net-(J5-Pad3)")) (pad 2 thru_hole oval (at 2 0) (size 1.2 2) (drill 0.75) (layers *.Cu *.Mask) (net 3 +5V)) (pad 1 thru_hole roundrect (at 0 0) (size 1.2 2) (drill 0.75) (layers *.Cu *.Mask) (roundrect_rratio 0.208) (net 1 GND)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical (layer F.Cu) (tedit 5FE9189A) (tstamp 5FEA794A) (at 149.5 95.75 180) (descr "JST XH series connector, B3B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH vertical") (path /5FE973A9) (fp_text reference J4 (at 2.5 -3.55) (layer F.SilkS) hide (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value OUT3 (at 10.5 9.25 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify left)) ) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 7.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start 7.45 3.4) (end 7.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 7.45 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 7.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 7.56 3.51) (end 7.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 7.56 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 7.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.95 3.9) (end 7.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.95 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 4.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -1.7) (end 4.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -2.45) (end 5.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -1.7) (end 7.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -1.7) (end 7.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -2.45) (end 5.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -0.2) (end 6.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 -0.2) (end 6.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 2.5 2.7) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 3 thru_hole oval (at 5 0 180) (size 1.7 2.5) (drill 0.95) (layers *.Cu *.Mask) (net 40 "Net-(J4-Pad3)")) (pad 2 thru_hole oval (at 2.5 0 180) (size 1.7 2.5) (drill 0.95) (layers *.Cu *.Mask) (net 3 +5V)) (pad 1 thru_hole roundrect (at 0 0 180) (size 1.7 2.5) (drill 0.95) (layers *.Cu *.Mask) (roundrect_rratio 0.147) (net 1 GND)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical (layer F.Cu) (tedit 5C28146C) (tstamp 5FEA79C5) (at 149.5 103 180) (descr "JST XH series connector, B3B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH vertical") (path /5FE96F59) (fp_text reference J3 (at 2.5 -3.55) (layer F.SilkS) hide (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value OUT2 (at 10.5 15 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify left)) ) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 7.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start 7.45 3.4) (end 7.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 7.45 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 7.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 7.56 3.51) (end 7.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 7.56 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 7.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.95 3.9) (end 7.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.95 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 4.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -1.7) (end 4.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -2.45) (end 5.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -1.7) (end 7.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -1.7) (end 7.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -2.45) (end 5.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -0.2) (end 6.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 -0.2) (end 6.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 2.5 2.7) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 3 thru_hole oval (at 5 0 180) (size 1.7 2.5) (drill 0.95) (layers *.Cu *.Mask) (net 39 "Net-(J3-Pad3)")) (pad 2 thru_hole oval (at 2.5 0 180) (size 1.7 2.5) (drill 0.95) (layers *.Cu *.Mask) (net 3 +5V)) (pad 1 thru_hole roundrect (at 0 0 180) (size 1.7 2.5) (drill 0.95) (layers *.Cu *.Mask) (roundrect_rratio 0.147) (net 1 GND)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (gr_line (start 147 84.25) (end 147 149.25) (layer Dwgs.User) (width 0.15)) (dimension 15 (width 0.15) (layer Dwgs.User) (gr_text "15.000 mm" (at 139.5 80.7) (layer Dwgs.User) (effects (font (size 1 1) (thickness 0.15))) ) (feature1 (pts (xy 147 84.25) (xy 147 81.413579))) (feature2 (pts (xy 132 84.25) (xy 132 81.413579))) (crossbar (pts (xy 132 82) (xy 147 82))) (arrow1a (pts (xy 147 82) (xy 145.873496 82.586421))) (arrow1b (pts (xy 147 82) (xy 145.873496 81.413579))) (arrow2a (pts (xy 132 82) (xy 133.126504 82.586421))) (arrow2b (pts (xy 132 82) (xy 133.126504 81.413579))) ) (dimension 30.25 (width 0.15) (layer Dwgs.User) (gr_text "30.250 mm" (at 147.125 78.2) (layer Dwgs.User) (effects (font (size 1 1) (thickness 0.15))) ) (feature1 (pts (xy 162.25 84.25) (xy 162.25 78.913579))) (feature2 (pts (xy 132 84.25) (xy 132 78.913579))) (crossbar (pts (xy 132 79.5) (xy 162.25 79.5))) (arrow1a (pts (xy 162.25 79.5) (xy 161.123496 80.086421))) (arrow1b (pts (xy 162.25 79.5) (xy 161.123496 78.913579))) (arrow2a (pts (xy 132 79.5) (xy 133.126504 80.086421))) (arrow2b (pts (xy 132 79.5) (xy 133.126504 78.913579))) ) (gr_line (start 132 149.5) (end 132 84.25) (layer Edge.Cuts) (width 0.05) (tstamp 5FEA07BA)) (gr_line (start 162.25 149.5) (end 132 149.5) (layer Edge.Cuts) (width 0.05)) (gr_line (start 162.25 84.25) (end 162.25 149.5) (layer Edge.Cuts) (width 0.05)) (gr_line (start 132 84.25) (end 162.25 84.25) (layer Edge.Cuts) (width 0.05)) (segment (start 146 125) (end 146 132.75) (width 0.5) (layer B.Cu) (net 1) (status 30)) (segment (start 156.19 123.19) (end 157.48 123.19) (width 0.5) (layer F.Cu) (net 1) (status 30)) (segment (start 135.5 132.75) (end 136.25 132.75) (width 0.5) (layer B.Cu) (net 1) (status 20)) (segment (start 136.25 125) (end 135.5 125) (width 0.5) (layer B.Cu) (net 1) (status 10)) (segment (start 137 110.75) (end 139.25 110.75) (width 0.5) (layer F.Cu) (net 1)) (segment (start 149.5 95.75) (end 149.5 110.25) (width 0.5) (layer B.Cu) (net 1)) (segment (start 135.8 140.55) (end 137 140.55) (width 0.5) (layer B.Cu) (net 1)) (segment (start 135.25 140) (end 135.8 140.55) (width 0.5) (layer B.Cu) (net 1)) (segment (start 135.25 133) (end 135.25 140) (width 0.5) (layer B.Cu) (net 1)) (segment (start 135.5 132.75) (end 135.25 133) (width 0.5) (layer B.Cu) (net 1)) (segment (start 135.25 124.75) (end 135.5 125) (width 0.5) (layer B.Cu) (net 1)) (segment (start 135.25 118.75) (end 135.25 124.75) (width 0.5) (layer B.Cu) (net 1)) (segment (start 135.6 118.4) (end 135.25 118.75) (width 0.5) (layer B.Cu) (net 1)) (segment (start 137 118.4) (end 135.6 118.4) (width 0.5) (layer B.Cu) (net 1)) (segment (start 135.25 132.5) (end 135.5 132.75) (width 0.5) (layer B.Cu) (net 1)) (segment (start 135.25 125.25) (end 135.25 132.5) (width 0.5) (layer B.Cu) (net 1)) (segment (start 135.5 125) (end 135.25 125.25) (width 0.5) (layer B.Cu) (net 1)) (segment (start 141.25 110) (end 140.5 110.75) (width 0.35) (layer F.Cu) (net 1)) (segment (start 141.25 103.75) (end 141.25 110) (width 0.35) (layer F.Cu) (net 1)) (segment (start 140.5 110.75) (end 139.25 110.75) (width 0.35) (layer F.Cu) (net 1)) (segment (start 140.925 103.425) (end 141.25 103.75) (width 0.35) (layer F.Cu) (net 1)) (segment (start 139.8625 103.425) (end 140.925 103.425) (width 0.35) (layer F.Cu) (net 1)) (segment (start 144.625 132.75) (end 146 132.75) (width 0.5) (layer B.Cu) (net 1)) (segment (start 144 133.375) (end 144.625 132.75) (width 0.5) (layer B.Cu) (net 1)) (segment (start 144 140) (end 144 133.375) (width 0.5) (layer B.Cu) (net 1)) (segment (start 144.5 140.5) (end 144 140) (width 0.5) (layer B.Cu) (net 1)) (segment (start 147.5 140.5) (end 144.5 140.5) (width 0.5) (layer B.Cu) (net 1)) (segment (start 144.5 125) (end 146 125) (width 0.5) (layer B.Cu) (net 1)) (segment (start 144 124.5) (end 144.5 125) (width 0.5) (layer B.Cu) (net 1)) (segment (start 144 119.125) (end 144 124.5) (width 0.5) (layer B.Cu) (net 1)) (segment (start 144.725 118.4) (end 144 119.125) (width 0.5) (layer B.Cu) (net 1)) (segment (start 147.5 118.4) (end 144.725 118.4) (width 0.5) (layer B.Cu) (net 1)) (segment (start 137 118.4) (end 137 117.850016) (width 0.5) (layer B.Cu) (net 1)) (segment (start 137 110.75) (end 137 114.350004) (width 0.5) (layer F.Cu) (net 1)) (via (at 138.750006 116.10001) (size 1.2) (drill 0.5) (layers F.Cu B.Cu) (net 1)) (segment (start 137 117.850016) (end 138.750006 116.10001) (width 0.5) (layer B.Cu) (net 1)) (segment (start 137 114.350004) (end 138.750006 116.10001) (width 0.5) (layer F.Cu) (net 1)) (segment (start 147.5 118.4) (end 147.5 118) (width 0.5) (layer B.Cu) (net 1)) (segment (start 147.5 118.4) (end 147.15 118.4) (width 0.5) (layer B.Cu) (net 1)) (segment (start 142.39999 116.10001) (end 138.750006 116.10001) (width 0.5) (layer B.Cu) (net 1)) (segment (start 142.75 115.75) (end 142.39999 116.10001) (width 0.5) (layer B.Cu) (net 1)) (segment (start 144.5 115.75) (end 142.75 115.75) (width 0.5) (layer B.Cu) (net 1)) (segment (start 144.5 118.175) (end 144.725 118.4) (width 0.5) (layer B.Cu) (net 1)) (segment (start 144.5 115.75) (end 144.5 118.175) (width 0.5) (layer B.Cu) (net 1)) (segment (start 149.5 110.75) (end 144.5 115.75) (width 0.5) (layer B.Cu) (net 1)) (segment (start 149.5 110.25) (end 149.5 110.75) (width 0.5) (layer B.Cu) (net 1)) (segment (start 153.25 141.25) (end 154.25 141.25) (width 0.5) (layer F.Cu) (net 1)) (segment (start 152.75 141.75) (end 153.25 141.25) (width 0.5) (layer F.Cu) (net 1)) (segment (start 152.75 142.75) (end 152.75 141.75) (width 0.5) (layer F.Cu) (net 1)) (segment (start 154.25 146.25) (end 154.25 141.25) (width 0.35) (layer F.Cu) (net 1)) (segment (start 153.649989 146.850011) (end 154.25 146.25) (width 0.35) (layer F.Cu) (net 1)) (segment (start 149.100011 146.850011) (end 153.649989 146.850011) (width 0.35) (layer F.Cu) (net 1)) (segment (start 148.83 146.58) (end 149.100011 146.850011) (width 0.35) (layer F.Cu) (net 1)) (segment (start 148.83 144.85) (end 148.83 146.58) (width 0.35) (layer F.Cu) (net 1)) (segment (start 154.31 123.19) (end 156.19 123.19) (width 0.5) (layer F.Cu) (net 1)) (segment (start 154.25 123.25) (end 154.31 123.19) (width 0.5) (layer F.Cu) (net 1)) (segment (start 154.25 141.25) (end 154.25 123.25) (width 0.5) (layer F.Cu) (net 1)) (segment (start 141.649996 119) (end 138.750006 116.10001) (width 0.5) (layer F.Cu) (net 1)) (segment (start 148 119) (end 141.649996 119) (width 0.5) (layer F.Cu) (net 1)) (segment (start 152.19 123.19) (end 148 119) (width 0.5) (layer F.Cu) (net 1)) (segment (start 156.19 123.19) (end 152.19 123.19) (width 0.5) (layer F.Cu) (net 1)) (via (at 149.5 91.1) (size 1.2) (drill 0.5) (layers F.Cu B.Cu) (net 1)) (segment (start 149.5 95.75) (end 149.5 91.1) (width 0.5) (layer B.Cu) (net 1)) (segment (start 152.75 86.75) (end 152.75 88) (width 0.5) (layer F.Cu) (net 1)) (segment (start 152.25 86.25) (end 152.75 86.75) (width 0.5) (layer F.Cu) (net 1)) (segment (start 148 86.25) (end 152.25 86.25) (width 0.5) (layer F.Cu) (net 1)) (segment (start 147.25 87) (end 148 86.25) (width 0.5) (layer F.Cu) (net 1)) (segment (start 145.899999 92.399999) (end 145.899999 90.400002) (width 0.5) (layer F.Cu) (net 1)) (segment (start 146.25 92.75) (end 145.899999 92.399999) (width 0.5) (layer F.Cu) (net 1)) (segment (start 149 92.75) (end 146.25 92.75) (width 0.5) (layer F.Cu) (net 1)) (segment (start 149.5 92.25) (end 149 92.75) (width 0.5) (layer F.Cu) (net 1)) (segment (start 147.25 89.050001) (end 147.25 87) (width 0.5) (layer F.Cu) (net 1)) (segment (start 145.899999 90.400002) (end 147.25 89.050001) (width 0.5) (layer F.Cu) (net 1)) (segment (start 149.5 91.1) (end 149.5 92.25) (width 0.5) (layer F.Cu) (net 1)) (segment (start 155.96 92.71) (end 157.48 92.71) (width 0.35) (layer F.Cu) (net 2)) (segment (start 154 99.75) (end 154 100) (width 0.35) (layer F.Cu) (net 2)) (segment (start 155.42 93.25) (end 155.96 92.71) (width 0.35) (layer F.Cu) (net 2)) (segment (start 154.25 93.25) (end 155.42 93.25) (width 0.35) (layer F.Cu) (net 2)) (via (at 154.28 113.03) (size 1.2) (drill 0.5) (layers F.Cu B.Cu) (net 2)) (segment (start 157.48 113.03) (end 154.28 113.03) (width 0.35) (layer F.Cu) (net 2)) (via (at 139.250026 106.75001) (size 1.2) (drill 0.5) (layers F.Cu B.Cu) (net 2)) (segment (start 139.25 108.75) (end 139.25 106.750036) (width 0.35) (layer F.Cu) (net 2)) (segment (start 139.25 106.750036) (end 139.250026 106.75001) (width 0.35) (layer F.Cu) (net 2)) (segment (start 139.250026 112.874964) (end 139.25 112.87499) (width 0.5) (layer B.Cu) (net 2)) (segment (start 139.250026 106.75001) (end 139.250026 112.874964) (width 0.5) (layer B.Cu) (net 2)) (segment (start 139.40501 113.03) (end 139.25 112.87499) (width 0.35) (layer F.Cu) (net 2)) (segment (start 154.28 113.03) (end 139.40501 113.03) (width 0.35) (layer F.Cu) (net 2)) (via (at 139.25 112.87499) (size 1.2) (drill 0.5) (layers F.Cu B.Cu) (net 2)) (segment (start 139.25 106.749984) (end 139.250026 106.75001) (width 0.35) (layer F.Cu) (net 2)) (segment (start 139.25 104.75) (end 139.25 106.749984) (width 0.35) (layer F.Cu) (net 2)) (segment (start 138.25 103.75) (end 139.25 104.75) (width 0.35) (layer F.Cu) (net 2)) (segment (start 138.25 103) (end 138.25 103.75) (width 0.35) (layer F.Cu) (net 2)) (segment (start 138.475 102.775) (end 138.25 103) (width 0.35) (layer F.Cu) (net 2)) (segment (start 139.8625 102.775) (end 138.475 102.775) (width 0.35) (layer F.Cu) (net 2)) (segment (start 154.25 99.75) (end 154.25 102.75) (width 0.35) (layer F.Cu) (net 2)) (segment (start 154.25 102.75) (end 154.25 103) (width 0.35) (layer F.Cu) (net 2)) (via (at 154.25 103) (size 1.2) (drill 0.5) (layers F.Cu B.Cu) (net 2)) (segment (start 154.28 113.03) (end 154.28 103.03) (width 0.5) (layer B.Cu) (net 2)) (segment (start 154.28 103.03) (end 154.25 103) (width 0.5) (layer B.Cu) (net 2)) (segment (start 149.72 113.03) (end 154.28 113.03) (width 0.5) (layer B.Cu) (net 2)) (segment (start 147.04 115.71) (end 149.72 113.03) (width 0.5) (layer B.Cu) (net 2)) (segment (start 147.04 115.75) (end 147.04 115.71) (width 0.5) (layer B.Cu) (net 2)) (segment (start 154.25 113.06) (end 154.28 113.03) (width 0.35) (layer F.Cu) (net 2)) (segment (start 154.28 114.47) (end 154.25 114.5) (width 0.5) (layer B.Cu) (net 2)) (segment (start 154.28 113.03) (end 154.28 114.47) (width 0.5) (layer B.Cu) (net 2)) (segment (start 144 89.5) (end 145.5 88) (width 0.35) (layer F.Cu) (net 2)) (segment (start 144 92.75) (end 144 89.5) (width 0.35) (layer F.Cu) (net 2)) (segment (start 145 93.75) (end 144 92.75) (width 0.35) (layer F.Cu) (net 2)) (segment (start 153.75 93.75) (end 145 93.75) (width 0.35) (layer F.Cu) (net 2)) (segment (start 154.25 93.25) (end 153.75 93.75) (width 0.35) (layer F.Cu) (net 2)) (segment (start 138.25 125) (end 138.25 129.25) (width 0.5) (layer B.Cu) (net 3) (status 10)) (segment (start 138.25 129.25) (end 138.25 132.75) (width 0.5) (layer B.Cu) (net 3) (status 20)) (segment (start 148 129.25) (end 148 132.75) (width 0.5) (layer B.Cu) (net 3) (status 20)) (segment (start 148 125) (end 148 129.25) (width 0.5) (layer B.Cu) (net 3) (status 10)) (via (at 147 91) (size 1.2) (drill 0.5) (layers F.Cu B.Cu) (net 3)) (segment (start 147 95.75) (end 147 91) (width 0.5) (layer B.Cu) (net 3)) (segment (start 138.25 129.25) (end 136.75 129.25) (width 0.5) (layer B.Cu) (net 3)) (via (at 136.75 129.25) (size 1.2) (drill 0.5) (layers F.Cu B.Cu) (net 3)) (via (at 149.500002 129.25) (size 1.2) (drill 0.5) (layers F.Cu B.Cu) (net 3)) (segment (start 148 129.25) (end 149.500002 129.25) (width 0.5) (layer B.Cu) (net 3)) (segment (start 152.75 144.75) (end 152 144.75) (width 0.35) (layer F.Cu) (net 3)) (segment (start 152 144.75) (end 151.5 144.75) (width 0.35) (layer F.Cu) (net 3)) (via (at 153 147.99998) (size 1.2) (drill 0.5) (layers F.Cu B.Cu) (net 3)) (segment (start 153 129.25) (end 149.500002 129.25) (width 0.5) (layer F.Cu) (net 3)) (segment (start 134.5 129.25) (end 136.75 129.25) (width 0.5) (layer F.Cu) (net 3)) (segment (start 134 128.75) (end 134.5 129.25) (width 0.5) (layer F.Cu) (net 3)) (segment (start 134 113.75) (end 134 128.75) (width 0.5) (layer F.Cu) (net 3)) (segment (start 153 147.99998) (end 153 139.25) (width 0.5) (layer B.Cu) (net 3)) (via (at 153 139.25) (size 1.2) (drill 0.5) (layers F.Cu B.Cu) (net 3)) (segment (start 152 139.25) (end 153 139.25) (width 0.35) (layer F.Cu) (net 3)) (segment (start 151.5 139.75) (end 152 139.25) (width 0.35) (layer F.Cu) (net 3)) (segment (start 151.5 144.75) (end 151.5 139.75) (width 0.35) (layer F.Cu) (net 3)) (segment (start 149.75 146.25) (end 149.48 145.98) (width 0.35) (layer F.Cu) (net 3)) (segment (start 150.75 146.25) (end 149.75 146.25) (width 0.35) (layer F.Cu) (net 3)) (segment (start 149.48 145.98) (end 149.48 144.85) (width 0.35) (layer F.Cu) (net 3)) (segment (start 151.5 145.5) (end 150.75 146.25) (width 0.35) (layer F.Cu) (net 3)) (segment (start 151.5 144.75) (end 151.5 145.5) (width 0.35) (layer F.Cu) (net 3)) (segment (start 152.75002 147.75) (end 153 147.99998) (width 0.5) (layer F.Cu) (net 3)) (segment (start 146.75 147.75) (end 152.75002 147.75) (width 0.5) (layer F.Cu) (net 3)) (segment (start 146.5 147.5) (end 146.75 147.75) (width 0.5) (layer F.Cu) (net 3)) (segment (start 143 147.5) (end 146.5 147.5) (width 0.5) (layer F.Cu) (net 3)) (segment (start 134.125012 115.875012) (end 136.374988 115.875012) (width 0.5) (layer F.Cu) (net 3)) (via (at 136.374988 115.875012) (size 1.2) (drill 0.5) (layers F.Cu B.Cu) (net 3)) (segment (start 134 115.75) (end 134.125012 115.875012) (width 0.5) (layer F.Cu) (net 3)) (segment (start 137.125 115.125) (end 136.374988 115.875012) (width 0.5) (layer B.Cu) (net 3)) (segment (start 137.25 115) (end 137.125 115.125) (width 0.5) (layer B.Cu) (net 3)) (segment (start 147 95.75) (end 147 107.75) (width 0.5) (layer B.Cu) (net 3)) (segment (start 147 107.75) (end 147 110.25) (width 0.5) (layer B.Cu) (net 3)) (segment (start 143 108.25) (end 143 114) (width 0.5) (layer B.Cu) (net 3)) (segment (start 147 107.75) (end 143.5 107.75) (width 0.5) (layer B.Cu) (net 3)) (segment (start 143.5 107.75) (end 143 108.25) (width 0.5) (layer B.Cu) (net 3)) (segment (start 143 114) (end 142.000011 114.999989) (width 0.5) (layer B.Cu) (net 3)) (segment (start 142.000011 114.999989) (end 137.250011 114.999989) (width 0.5) (layer B.Cu) (net 3)) (segment (start 137.250011 114.999989) (end 137.125 115.125) (width 0.5) (layer B.Cu) (net 3)) (segment (start 136.974987 116.475011) (end 136.374988 115.875012) (width 0.5) (layer F.Cu) (net 3)) (segment (start 140.499976 120) (end 136.974987 116.475011) (width 0.5) (layer F.Cu) (net 3)) (segment (start 147.598528 120) (end 140.499976 120) (width 0.5) (layer F.Cu) (net 3)) (segment (start 153 125.401472) (end 147.598528 120) (width 0.5) (layer F.Cu) (net 3)) (segment (start 153 139.25) (end 153 125.401472) (width 0.5) (layer F.Cu) (net 3)) (segment (start 149 89) (end 147 91) (width 0.5) (layer F.Cu) (net 3)) (segment (start 149 88) (end 149 89) (width 0.5) (layer F.Cu) (net 3)) (segment (start 148 90) (end 147 91) (width 0.5) (layer F.Cu) (net 3)) (segment (start 154.25 90) (end 148 90) (width 0.5) (layer F.Cu) (net 3)) (segment (start 155.5 91.25) (end 154.25 90) (width 0.5) (layer F.Cu) (net 3)) (segment (start 159.76 91.25) (end 155.5 91.25) (width 0.5) (layer F.Cu) (net 3)) (segment (start 160.02 91.51) (end 159.76 91.25) (width 0.5) (layer F.Cu) (net 3)) (segment (start 160.02 92.71) (end 160.02 91.51) (width 0.5) (layer F.Cu) (net 3)) (segment (start 155.05 107.95) (end 155 108) (width 0.35) (layer F.Cu) (net 26)) (segment (start 157.48 107.95) (end 155.05 107.95) (width 0.35) (layer F.Cu) (net 26)) (segment (start 157.48 110.49) (end 156.24 110.49) (width 0.35) (layer F.Cu) (net 30) (status 30)) (segment (start 155.01 110.49) (end 155 110.5) (width 0.35) (layer F.Cu) (net 30)) (segment (start 157.48 110.49) (end 155.01 110.49) (width 0.35) (layer F.Cu) (net 30)) (segment (start 157.48 97.79) (end 157.44 97.75) (width 0.35) (layer F.Cu) (net 33)) (segment (start 151.275 98.225) (end 151.75 97.75) (width 0.35) (layer F.Cu) (net 33)) (segment (start 139.8625 98.225) (end 151.275 98.225) (width 0.35) (layer F.Cu) (net 33)) (segment (start 154.29 97.79) (end 154.25 97.75) (width 0.35) (layer F.Cu) (net 33)) (segment (start 157.48 97.79) (end 154.29 97.79) (width 0.35) (layer F.Cu) (net 33)) (segment (start 151.75 97.75) (end 154.25 97.75) (width 0.35) (layer F.Cu) (net 33)) (segment (start 155.09 105.41) (end 155 105.5) (width 0.35) (layer F.Cu) (net 36)) (segment (start 157.48 105.41) (end 155.09 105.41) (width 0.35) (layer F.Cu) (net 36)) (segment (start 157.48 95.25) (end 154.25 95.25) (width 0.35) (layer F.Cu) (net 37)) (segment (start 150.8 97.575) (end 139.8625 97.575) (width 0.35) (layer F.Cu) (net 37)) (segment (start 153.125 95.25) (end 150.8 97.575) (width 0.35) (layer F.Cu) (net 37)) (segment (start 154.25 95.25) (end 153.125 95.25) (width 0.35) (layer F.Cu) (net 37)) (segment (start 144.5 110.25) (end 144.5 113.25) (width 0.5) (layer B.Cu) (net 38)) (segment (start 144.5 103) (end 144.5 106) (width 0.5) (layer B.Cu) (net 39)) (segment (start 144.5 95.75) (end 144.5 98.75) (width 0.5) (layer B.Cu) (net 40)) (segment (start 151.2 140.55) (end 150 140.55) (width 0.5) (layer B.Cu) (net 41)) (segment (start 151.5 140.25) (end 151.2 140.55) (width 0.5) (layer B.Cu) (net 41)) (segment (start 151.5 133) (end 151.5 140.25) (width 0.5) (layer B.Cu) (net 41)) (segment (start 151.25 132.75) (end 151.5 133) (width 0.5) (layer B.Cu) (net 41)) (segment (start 150 132.75) (end 151.25 132.75) (width 0.5) (layer B.Cu) (net 41)) (segment (start 142.385789 140.5) (end 139.5 140.5) (width 0.5) (layer B.Cu) (net 42)) (segment (start 143 139.885789) (end 142.385789 140.5) (width 0.5) (layer B.Cu) (net 42)) (segment (start 143 133.25) (end 143 139.885789) (width 0.5) (layer B.Cu) (net 42)) (segment (start 142.5 132.75) (end 143 133.25) (width 0.5) (layer B.Cu) (net 42)) (segment (start 140.25 132.75) (end 142.5 132.75) (width 0.5) (layer B.Cu) (net 42)) (segment (start 151 125) (end 150 125) (width 0.5) (layer B.Cu) (net 43) (status 20)) (segment (start 151.5 118.75) (end 151.5 124.5) (width 0.5) (layer B.Cu) (net 43)) (segment (start 151.15 118.4) (end 151.5 118.75) (width 0.5) (layer B.Cu) (net 43)) (segment (start 151.5 124.5) (end 151 125) (width 0.5) (layer B.Cu) (net 43)) (segment (start 150 118.4) (end 151.15 118.4) (width 0.5) (layer B.Cu) (net 43) (status 10)) (segment (start 143 124.5) (end 142.5 125) (width 0.5) (layer B.Cu) (net 44)) (segment (start 143 118.999974) (end 143 124.5) (width 0.5) (layer B.Cu) (net 44)) (segment (start 142.400026 118.4) (end 143 118.999974) (width 0.5) (layer B.Cu) (net 44)) (segment (start 142.5 125) (end 140.25 125) (width 0.5) (layer B.Cu) (net 44)) (segment (start 139.5 118.4) (end 142.400026 118.4) (width 0.5) (layer B.Cu) (net 44)) (via (at 135.749999 106.699985) (size 1.2) (drill 0.5) (layers F.Cu B.Cu) (net 45)) (segment (start 135.749999 102.250001) (end 135.749999 106.699985) (width 0.35) (layer F.Cu) (net 45)) (segment (start 135.625 102.125) (end 135.749999 102.250001) (width 0.35) (layer F.Cu) (net 45)) (segment (start 134.1375 102.125) (end 135.625 102.125) (width 0.35) (layer F.Cu) (net 45)) (segment (start 135.749999 113.999999) (end 135.15 113.4) (width 0.5) (layer B.Cu) (net 45)) (segment (start 135.15 113.4) (end 135.15 107.299984) (width 0.5) (layer B.Cu) (net 45)) (segment (start 135.15 107.299984) (end 135.749999 106.699985) (width 0.5) (layer B.Cu) (net 45)) (segment (start 141.4 113.25) (end 140.650001 113.999999) (width 0.5) (layer B.Cu) (net 45)) (segment (start 140.650001 113.999999) (end 135.749999 113.999999) (width 0.5) (layer B.Cu) (net 45)) (via (at 137.5 105.25) (size 1.2) (drill 0.5) (layers F.Cu B.Cu) (net 46)) (segment (start 137.5 103) (end 137.5 105.25) (width 0.35) (layer F.Cu) (net 46)) (segment (start 135.975 101.475) (end 137.5 103) (width 0.35) (layer F.Cu) (net 46)) (segment (start 134.1375 101.475) (end 135.975 101.475) (width 0.35) (layer F.Cu) (net 46)) (segment (start 140.25 106) (end 139.5 105.25) (width 0.5) (layer B.Cu) (net 46)) (segment (start 139.5 105.25) (end 137.5 105.25) (width 0.5) (layer B.Cu) (net 46)) (segment (start 141.4 106) (end 140.25 106) (width 0.5) (layer B.Cu) (net 46)) (via (at 140.862412 96.146725) (size 1.2) (drill 0.5) (layers F.Cu B.Cu) (net 47)) (segment (start 141.4 98.75) (end 141.4 96.684313) (width 0.5) (layer B.Cu) (net 47)) (segment (start 141.4 96.684313) (end 140.862412 96.146725) (width 0.5) (layer B.Cu) (net 47)) (segment (start 138.603275 96.146725) (end 140.862412 96.146725) (width 0.35) (layer F.Cu) (net 47)) (segment (start 138.25 96.5) (end 138.603275 96.146725) (width 0.35) (layer F.Cu) (net 47)) (segment (start 138.25 98.5) (end 138.25 96.5) (width 0.35) (layer F.Cu) (net 47)) (segment (start 135.925 100.825) (end 138.25 98.5) (width 0.35) (layer F.Cu) (net 47)) (segment (start 134.1375 100.825) (end 135.925 100.825) (width 0.35) (layer F.Cu) (net 47)) (via (at 145.197208 143.762544) (size 1.2) (drill 0.5) (layers F.Cu B.Cu) (net 48)) (segment (start 133.075 97.575) (end 134.1375 97.575) (width 0.35) (layer F.Cu) (net 48)) (via (at 134.25 95.25) (size 1.2) (drill 0.5) (layers F.Cu B.Cu) (net 48)) (segment (start 134.25 95.25) (end 133 95.25) (width 0.35) (layer F.Cu) (net 48)) (segment (start 133 95.25) (end 132.75 95.5) (width 0.35) (layer F.Cu) (net 48)) (segment (start 132.75 97.25) (end 133.075 97.575) (width 0.35) (layer F.Cu) (net 48)) (segment (start 132.75 95.5) (end 132.75 97.25) (width 0.35) (layer F.Cu) (net 48)) (segment (start 134.25 95.25) (end 134.25 93) (width 0.35) (layer F.Cu) (net 48)) (segment (start 133.375001 96.124999) (end 134.25 95.25) (width 0.5) (layer B.Cu) (net 48)) (segment (start 133.375001 141.125001) (end 133.375001 96.124999) (width 0.5) (layer B.Cu) (net 48)) (segment (start 134.75 142.5) (end 133.375001 141.125001) (width 0.5) (layer B.Cu) (net 48)) (segment (start 137.25 142.5) (end 134.75 142.5) (width 0.5) (layer B.Cu) (net 48)) (segment (start 138.512544 143.762544) (end 137.25 142.5) (width 0.5) (layer B.Cu) (net 48)) (segment (start 145.197208 143.762544) (end 138.512544 143.762544) (width 0.5) (layer B.Cu) (net 48)) (segment (start 145.25 145.5) (end 145.25 143.815336) (width 0.35) (layer F.Cu) (net 48)) (segment (start 145.25 143.815336) (end 145.197208 143.762544) (width 0.35) (layer F.Cu) (net 48)) (segment (start 145.25 145.745388) (end 145.25 145.5) (width 0.35) (layer F.Cu) (net 48)) (segment (start 148.17 144.85) (end 148.17 146.58) (width 0.35) (layer F.Cu) (net 48)) (segment (start 148.17 146.58) (end 147.925009 146.824991) (width 0.35) (layer F.Cu) (net 48)) (segment (start 147.925009 146.824991) (end 146.329603 146.824991) (width 0.35) (layer F.Cu) (net 48)) (segment (start 146.329603 146.824991) (end 145.25 145.745388) (width 0.35) (layer F.Cu) (net 48)) (via (at 136.75 95.250012) (size 1.2) (drill 0.5) (layers F.Cu B.Cu) (net 49)) (segment (start 136.275 98.225) (end 136.75 97.75) (width 0.35) (layer F.Cu) (net 49)) (segment (start 136.75 97.75) (end 136.75 95.250012) (width 0.35) (layer F.Cu) (net 49)) (segment (start 134.1375 98.225) (end 136.275 98.225) (width 0.35) (layer F.Cu) (net 49)) (segment (start 138.5 95) (end 138.5 93) (width 0.35) (layer F.Cu) (net 49)) (segment (start 138.249988 95.250012) (end 138.5 95) (width 0.35) (layer F.Cu) (net 49)) (segment (start 136.75 95.250012) (end 138.249988 95.250012) (width 0.35) (layer F.Cu) (net 49)) (segment (start 135.5 141.75) (end 143 141.75) (width 0.5) (layer B.Cu) (net 49)) (segment (start 134.25 140.5) (end 135.5 141.75) (width 0.5) (layer B.Cu) (net 49)) (segment (start 134.25 97.750012) (end 134.25 140.5) (width 0.5) (layer B.Cu) (net 49)) (segment (start 143 145.4) (end 143 141.75) (width 0.35) (layer F.Cu) (net 49)) (segment (start 143 146) (end 143 145.4) (width 0.35) (layer F.Cu) (net 49)) (segment (start 136.75 95.250012) (end 134.25 97.750012) (width 0.5) (layer B.Cu) (net 49)) (via (at 143 141.75) (size 1.2) (drill 0.5) (layers F.Cu B.Cu) (net 49)) (segment (start 146 141.75) (end 143 141.75) (width 0.35) (layer F.Cu) (net 49)) (segment (start 146.5 146.146845) (end 146.5 142.25) (width 0.35) (layer F.Cu) (net 49)) (segment (start 146.5 142.25) (end 146 141.75) (width 0.35) (layer F.Cu) (net 49)) (segment (start 146.578135 146.22498) (end 146.5 146.146845) (width 0.35) (layer F.Cu) (net 49)) (segment (start 147.27502 146.22498) (end 146.578135 146.22498) (width 0.35) (layer F.Cu) (net 49)) (segment (start 147.52 145.98) (end 147.27502 146.22498) (width 0.35) (layer F.Cu) (net 49)) (segment (start 147.52 144.85) (end 147.52 145.98) (width 0.35) (layer F.Cu) (net 49)) (segment (start 147.5 121.5) (end 150 121.5) (width 0.5) (layer B.Cu) (net 50) (status 30)) (via (at 145.25 121.25) (size 1.2) (drill 0.5) (layers F.Cu B.Cu) (net 50)) (segment (start 145.5 121.5) (end 145.25 121.25) (width 0.5) (layer B.Cu) (net 50)) (segment (start 147.5 121.5) (end 145.5 121.5) (width 0.5) (layer B.Cu) (net 50)) (segment (start 149.48 139.98) (end 149.48 142.65) (width 0.35) (layer F.Cu) (net 50)) (segment (start 148 138.5) (end 149.48 139.98) (width 0.35) (layer F.Cu) (net 50)) (segment (start 144.25 133.25) (end 148 137) (width 0.35) (layer F.Cu) (net 50)) (segment (start 144.25 122.25) (end 144.25 133.25) (width 0.35) (layer F.Cu) (net 50)) (segment (start 148 137) (end 148 138.5) (width 0.35) (layer F.Cu) (net 50)) (segment (start 145.25 121.25) (end 144.25 122.25) (width 0.35) (layer F.Cu) (net 50)) (segment (start 137 121.5) (end 139.5 121.5) (width 0.5) (layer B.Cu) (net 51)) (segment (start 141.499979 121.5) (end 141.749977 121.250002) (width 0.5) (layer B.Cu) (net 51)) (segment (start 139.5 121.5) (end 141.499979 121.5) (width 0.5) (layer B.Cu) (net 51)) (via (at 141.749977 121.250002) (size 1.2) (drill 0.5) (layers F.Cu B.Cu) (net 51)) (segment (start 147.25 138.75) (end 148.83 140.33) (width 0.35) (layer F.Cu) (net 51)) (segment (start 148.83 140.33) (end 148.83 142.65) (width 0.35) (layer F.Cu) (net 51)) (segment (start 147.25 137.25) (end 147.25 138.75) (width 0.35) (layer F.Cu) (net 51)) (segment (start 141.749977 131.749977) (end 147.25 137.25) (width 0.35) (layer F.Cu) (net 51)) (segment (start 141.749977 121.250002) (end 141.749977 131.749977) (width 0.35) (layer F.Cu) (net 51)) (segment (start 149.95 137.4) (end 150 137.45) (width 0.5) (layer B.Cu) (net 52) (status 30)) (segment (start 147.5 137.4) (end 149.95 137.4) (width 0.5) (layer B.Cu) (net 52) (status 30)) (segment (start 147.5 137.4) (end 145.35 137.4) (width 0.5) (layer B.Cu) (net 52)) (segment (start 145.35 137.4) (end 145.25 137.5) (width 0.5) (layer B.Cu) (net 52)) (via (at 145.25 137.5) (size 1.2) (drill 0.5) (layers F.Cu B.Cu) (net 52)) (segment (start 148.17 140.67) (end 148.17 142.65) (width 0.35) (layer F.Cu) (net 52)) (segment (start 146.5 139) (end 148.17 140.67) (width 0.35) (layer F.Cu) (net 52)) (segment (start 146.5 138.5) (end 146.5 139) (width 0.35) (layer F.Cu) (net 52)) (segment (start 145.5 137.5) (end 146.5 138.5) (width 0.35) (layer F.Cu) (net 52)) (segment (start 145.25 137.5) (end 145.5 137.5) (width 0.35) (layer F.Cu) (net 52)) (segment (start 137 137.4) (end 139.5 137.4) (width 0.5) (layer B.Cu) (net 53)) (via (at 141.724969 137.550646) (size 1.2) (drill 0.5) (layers F.Cu B.Cu) (net 53)) (segment (start 139.5 137.4) (end 141.574323 137.4) (width 0.5) (layer B.Cu) (net 53)) (segment (start 141.574323 137.4) (end 141.724969 137.550646) (width 0.5) (layer B.Cu) (net 53)) (segment (start 147.52 141.02) (end 147.52 142.65) (width 0.35) (layer F.Cu) (net 53)) (segment (start 145.5 139) (end 147.52 141.02) (width 0.35) (layer F.Cu) (net 53)) (segment (start 143 139) (end 145.5 139) (width 0.35) (layer F.Cu) (net 53)) (segment (start 141.724969 137.724969) (end 143 139) (width 0.35) (layer F.Cu) (net 53)) (segment (start 141.724969 137.550646) (end 141.724969 137.724969) (width 0.35) (layer F.Cu) (net 53)) (segment (start 151.25 107) (end 151.75 107.5) (width 0.35) (layer F.Cu) (net 61)) (segment (start 141.850011 104.797097) (end 144.052914 107) (width 0.35) (layer F.Cu) (net 61)) (segment (start 141.125 102.125) (end 141.850011 102.850011) (width 0.35) (layer F.Cu) (net 61)) (segment (start 144.052914 107) (end 151.25 107) (width 0.35) (layer F.Cu) (net 61)) (segment (start 151.75 109.85) (end 152.4 110.5) (width 0.35) (layer F.Cu) (net 61)) (segment (start 139.8625 102.125) (end 141.125 102.125) (width 0.35) (layer F.Cu) (net 61)) (segment (start 141.850011 102.850011) (end 141.850011 104.797097) (width 0.35) (layer F.Cu) (net 61)) (segment (start 152.4 110.5) (end 153 110.5) (width 0.35) (layer F.Cu) (net 61)) (segment (start 151.75 107.5) (end 151.75 109.85) (width 0.35) (layer F.Cu) (net 61)) (segment (start 142.450022 104.548565) (end 144.151457 106.25) (width 0.35) (layer F.Cu) (net 62)) (segment (start 144.151457 106.25) (end 151.95 106.25) (width 0.35) (layer F.Cu) (net 62)) (segment (start 153 107.3) (end 153 108) (width 0.35) (layer F.Cu) (net 62)) (segment (start 139.8625 101.475) (end 141.323543 101.475) (width 0.35) (layer F.Cu) (net 62)) (segment (start 151.95 106.25) (end 153 107.3) (width 0.35) (layer F.Cu) (net 62)) (segment (start 142.450022 102.601479) (end 142.450022 104.548565) (width 0.35) (layer F.Cu) (net 62)) (segment (start 141.323543 101.475) (end 142.450022 102.601479) (width 0.35) (layer F.Cu) (net 62)) (segment (start 143.050033 102.20149) (end 143.050033 104.300033) (width 0.35) (layer F.Cu) (net 63)) (segment (start 144.25 105.5) (end 153 105.5) (width 0.35) (layer F.Cu) (net 63)) (segment (start 143.050033 104.300033) (end 144.25 105.5) (width 0.35) (layer F.Cu) (net 63)) (segment (start 139.8625 100.825) (end 141.673543 100.825) (width 0.35) (layer F.Cu) (net 63)) (segment (start 141.673543 100.825) (end 143.050033 102.20149) (width 0.35) (layer F.Cu) (net 63)) (segment (start 132.975 102.775) (end 134.1375 102.775) (width 0.35) (layer F.Cu) (net 64)) (segment (start 132.75 103) (end 132.975 102.775) (width 0.35) (layer F.Cu) (net 64)) (segment (start 134 105.25) (end 132.75 104) (width 0.35) (layer F.Cu) (net 64)) (segment (start 134 110.65) (end 134 105.25) (width 0.35) (layer F.Cu) (net 64)) (segment (start 134 108.675) (end 134 110.65) (width 0.35) (layer F.Cu) (net 64)) (segment (start 137 108.675) (end 134 108.675) (width 0.35) (layer F.Cu) (net 64)) (segment (start 132.825 103.425) (end 132.75 103.5) (width 0.35) (layer F.Cu) (net 64)) (segment (start 134.1375 103.425) (end 132.825 103.425) (width 0.35) (layer F.Cu) (net 64)) (segment (start 132.75 103.5) (end 132.75 103) (width 0.35) (layer F.Cu) (net 64)) (segment (start 132.75 104) (end 132.75 103.5) (width 0.35) (layer F.Cu) (net 64)) (via (at 155.35 128.25) (size 1.2) (drill 0.5) (layers F.Cu B.Cu) (net 65)) (segment (start 155.37 128.27) (end 155.35 128.25) (width 0.35) (layer F.Cu) (net 65)) (segment (start 157.48 128.27) (end 155.37 128.27) (width 0.35) (layer F.Cu) (net 65)) (segment (start 152.5 116.5) (end 154.25 116.5) (width 0.5) (layer B.Cu) (net 65)) (segment (start 151.75 115.75) (end 152.5 116.5) (width 0.5) (layer B.Cu) (net 65)) (segment (start 149.58 115.75) (end 151.75 115.75) (width 0.5) (layer B.Cu) (net 65)) (segment (start 154.25 127.15) (end 155.35 128.25) (width 0.5) (layer B.Cu) (net 65)) (segment (start 154.25 116.5) (end 154.25 127.15) (width 0.5) (layer B.Cu) (net 65)) )