blueprint:
  name: Weather upload
  description: >
    Upload weather data from Home Assistant to WUnderground and/or WOW.

    Config:
      The wu_station_id and wu_station_key variable must be fetched from WUnderground and the wow_site_id and wow_site_auth_key variable must be fetchet from WOW.
      Data will be uploaded to WUnderground if the wu_station_id and wu_station_key are filled in and data will be uploaded to WOW if the wow_site_id and wow_site_auth_key variable are filled in.

      The sensor_* variables are the sensors whos data will be uploaded
      The trigger_entities variable specifies the entries to trigger state changes on (this could be a list)
      The curl_command_service variable specifies the CURL-service to execute.
      The refresh_frequency variable specifies the frequency the sensors update their data
      The dewpoint temperature can be calculated based on the outdoor temperature and the outdoor humidity.
        By default, it will be calculated, to disable this set calculate_dewpt to false.

    The CURL-service must exist in Home Assistant.
    This can be configured with the following YAML
      shell_command:
        curl_get: 'curl -X GET {{ url }}'

    Automation config example:
      automation:
        - id: weather_data_upload
          alias: Weather data upload
          use_blueprint:
            path: weather_upload.yaml
            input:
              wu_station_id: !secret wunderground_station_id
              wu_station_key: !secret wunderground_station_key
              sensor_baro: 'sensor.outdoor_pressure'
              sensor_temp: 'sensor.outdoor_temperature'
              sensor_humidity: 'sensor.outdoor_humidity'
              sensor_rain: 'sensor.outdoor_rain'
              sensor_dailyrain: 'sensor.outdoor_rain_today'
              refresh_frequency: 300
              trigger_entities:
                - sensor.outdoor_temperature
                - sensor.outdoor_humidity
                - sensor.outdoor_rain
                - sensor.outdoor_rain_today
              curl_command_service: shell_command.curl_get
  domain: automation
  source_url: "https://github.com/dvandonkelaar/home-assistant-blueprints/raw/main/weather_upload.yaml"
  input:
    wu_station_id:
      name: WUnderground station ID
      default: ''
    wu_station_key:
      name: WUnderground station key
      default: ''
    wow_site_id:
      name: WOW site ID
      default: ''
    wow_site_auth_key:
      name: WOW site authentication key
      default: ''
    sensor_baro:
      name: Barometer sensor
      selector:
        entity:
          domain: sensor
          device_class: pressure
      default: ''
    sensor_temp:
      name: Temperature sensor
      selector:
        entity:
          domain: sensor
          device_class: temperature
      default: ''
    sensor_dewpt:
      name: Dew point sensor
      selector:
        entity:
          domain: sensor
          device_class: temperature
      default: ''
    calculate_dewpt:
      name: Calculate dewpoint
      description:
        Dewpoint calculation is only possible if the outdoor temperature and outdoor humidity sensor are available.
      selector:
        boolean:
      default: true
    sensor_humidity:
      name: Humidity sensor
      selector:
        entity:
          domain: sensor
          device_class: humidity
      default: ''
    sensor_windspeed:
      name: Wind speed sensor
      selector:
        entity:
          domain: sensor
      default: ''
    sensor_windgust:
      name: Wind gust sensor
      selector:
        entity:
          domain: sensor
      default: ''
    sensor_winddir:
      name: Wind direction sensor
      selector:
        entity:
          domain: sensor
      default: ''
    sensor_windgustdir:
      name: Wind Gust direction sensor
      selector:
        entity:
          domain: sensor
      default: ''
    sensor_rain:
      name: Rain sensor
      selector:
        entity:
          domain: sensor
      default: ''
    sensor_dailyrain:
      name: Daily rain sensor
      selector:
        entity:
          domain: sensor
      default: ''
    sensor_indoortemp:
      name: Indoor temperature sensor
      selector:
        entity:
          domain: sensor
          device_class: temperature
      default: ''
    sensor_indoorhumidity:
      name: Indoor humidity sensor
      selector:
        entity:
          domain: sensor
          device_class: humidity
      default: ''
    sensor_solarradiation:
      name: Solar Radiation sensor
      selector:
        entity:
          domain: sensor
      default: ''
    sensor_UV:
      name: UV Index sensor
      selector:
        entity:
          domain: sensor
      default: ''
    refresh_frequency:
      name: Refresh frequency (seconds)
      selector:
        number:
          min: 1
          max: 10800
          step: 1
          unit_of_measurement: seconds
    trigger_entities:
      name: Trigger entities
      selector:
        entity:
          multiple: true
          filter:
            domain: sensor
      default: ''
    curl_command_service:
      name: CURL command service
      selector:
        text:
      default: ''
    delay:
      name: Delay after publishing results
      selector:
        number:
          min: 0
          max: 10800
          step: 1
          unit_of_measurement: seconds
      default: 10

mode: single
max_exceeded: silent

trigger:
  - platform: state
    entity_id: !input trigger_entities

variables:
  wu_station_id: !input wu_station_id
  wu_station_key: !input wu_station_key
  wow_site_id: !input wow_site_id
  wow_site_auth_key: !input wow_site_auth_key
  sensor_baro: !input sensor_baro
  sensor_temp: !input sensor_temp
  sensor_dewpt: !input sensor_dewpt
  calculate_dewpt: !input calculate_dewpt
  sensor_humidity: !input sensor_humidity
  sensor_windspeed: !input sensor_windspeed
  sensor_windgust: !input sensor_windgust
  sensor_winddir: !input sensor_winddir
  sensor_windgustdir: !input sensor_windgustdir
  sensor_rain: !input sensor_rain
  sensor_dailyrain: !input sensor_dailyrain
  sensor_indoortemp: !input sensor_indoortemp
  sensor_indoorhumidity: !input sensor_indoorhumidity
  sensor_solarradiation: !input sensor_solarradiation
  sensor_UV: !input sensor_UV
  rtfreq: !input refresh_frequency
  delay: !input delay
  baromin: >
    {% set unit_of_measurement = state_attr(sensor_baro, 'unit_of_measurement') %}
    {{ sensor_baro if sensor_baro == ''
        else (states(sensor_baro) | float(default=0)) if unit_of_measurement not in ['mbar', 'hPa']
          else ((states(sensor_baro) | float(default=0)) / 33.8639) }}
  tempf: >
    {% set unit_of_measurement = state_attr(sensor_temp, 'unit_of_measurement') %}
    {{ sensor_temp if sensor_temp == ''
        else ((states(sensor_temp) | float(default=0)) if unit_of_measurement == '°F'
          else ((states(sensor_temp) | float(default=0)) * 1.8) + 32) }}
  humidity: >
    {{ sensor_humidity if sensor_humidity == '' else (states(sensor_humidity) | float(default=0)) }}
  windspeedmph: >
    {% set unit_of_measurement = state_attr(sensor_windspeed, 'unit_of_measurement') %}
    {{ sensor_windspeed if sensor_windspeed == ''
        else (states(sensor_windspeed) | float(default=0)) * (0.6213 if unit_of_measurement == 'km/h' else 1) }}
  windgustmph: >
    {% set unit_of_measurement = state_attr(sensor_windgust, 'unit_of_measurement') %}
    {{ sensor_windgust if sensor_windgust == ''
        else (states(sensor_windgust) | float(default=0)) * (0.6213 if unit_of_measurement == 'km/h' else 1) }}
  winddir: >
    {% set candidate_wind_direction = states(sensor_winddir) %}
    {% set wind_direction_float = candidate_wind_direction | float(default=-1) %}
    {% if wind_direction_float == -1 %}
      {% set directions_map16 = {'N': 0, 'NNE': 22.5, 'NE': 45, 'ENE': 67.5, 'E': 90, 'ESE': 112.5, 'SE': 135, 'SSE': 157.5, 'S': 180, 'SSW': 202.5, 'SW': 225, 'WSW': 247.5, 'W': 270, 'WNW': 292.5, 'NW': 315, 'NNW': 337.5} %}
      {% set candidate_wind_direction = candidate_wind_direction.upper() %}
      {{ directions_map16.get(candidate_wind_direction, '') | float(default=0) }}
    {%- else -%}
      {{ wind_direction_float }}
    {%- endif %}
  windgustdir: >
    {% set candidate_windgust_direction = states(sensor_windgustdir) %}
    {% set windgust_direction_float = candidate_windgust_direction | float(default=-1) %}
    {% if windgust_direction_float == -1 %}
      {% set directions_map16 = {'N': 0, 'NNE': 22.5, 'NE': 45, 'ENE': 67.5, 'E': 90, 'ESE': 112.5, 'SE': 135, 'SSE': 157.5, 'S': 180, 'SSW': 202.5, 'SW': 225, 'WSW': 247.5, 'W': 270, 'WNW': 292.5, 'NW': 315, 'NNW': 337.5} %}
      {% set candidate_windgust_direction = candidate_windgust_direction.upper() %}
      {{ directions_map16.get(candidate_windgust_direction, '') | float(default=0) }}
    {%- else -%}
      {{ windgust_direction_float }}
    {%- endif %}
  rainin: >
    {% set unit_of_measurement = state_attr(sensor_rain, 'unit_of_measurement') %}
    {{ sensor_rain if sensor_rain == ''
        else ((states(sensor_rain) | float(default=0)) / (25.4 if unit_of_measurement == 'mm' else 1)) }}
  dailyrainin: >
    {% set unit_of_measurement = state_attr(sensor_dailyrain, 'unit_of_measurement') %}
    {{ sensor_dailyrain if sensor_dailyrain == ''
        else ((states(sensor_dailyrain) | float(default=0)) / (25.4 if unit_of_measurement == 'mm' else 1)) }}
  indoortempf: >
    {% set unit_of_measurement = state_attr(sensor_indoortemp, 'unit_of_measurement') %}
    {{ sensor_indoortemp if sensor_indoortemp == ''
        else ((states(sensor_indoortemp) | float(default=0)) if unit_of_measurement == '°F'
          else ((states(sensor_indoortemp) | float(default=0)) * 1.8) + 32) }}
  indoorhumidity: >
    {{ sensor_indoorhumidity if sensor_indoorhumidity == ''
        else (states(sensor_indoorhumidity) | float(default=0)) }}
  solarradiation: >
    {% set unit_of_measurement = state_attr(sensor_solarradiation, 'unit_of_measurement') %}
    {{ sensor_solarradiation if sensor_solarradiation == ''
        else ((states(sensor_solarradiation) | float(default=0) / 126.7) ) if unit_of_measurement == 'lux'
          else (states(sensor_solarradiation) | float(default=0)) }}
  UV: >
    {{ sensor_UV if sensor_UV == ''
        else (states(sensor_UV) | int(default=0)) }}
  dewptf_calculated: >
    {% set unit_of_measurement = state_attr(sensor_temp, 'unit_of_measurement') %}
    {% set T = ((states(sensor_temp) | float(default=0)) if unit_of_measurement == '°C'
                else ((states(sensor_temp) | float(default=0)) - 32) / 1.8) %}
    {% set RH = humidity %}
    {% set dewpt = '' %}
    {% if sensor_temp != '' and sensor_humidity != '' %}
      {% set A = log(RH / 100, default=0.0) + (17.62 * T / (243.12 + T)) %}
      {% set dewpt = 243.12 * A / (17.62 - A) %}
      {% set dewpt = (dewpt * 1.8) + 32 %}
    {% endif %}
    {{ dewpt }}
  dewptf: >
    {% set unit_of_measurement = state_attr(sensor_dewpt, 'unit_of_measurement') %}
    {{ (dewptf_calculated if calculate_dewpt is true
        else sensor_dewpt) if sensor_dewpt == ''
          else ((states(sensor_dewpt) | float(default=0)) if unit_of_measurement == '°F'
            else ((states(sensor_dewpt) | float(default=0)) * 1.8) + 32) }}
  wu_payload: >
    {% set data = namespace(sensors=[]) %}

    {% for i in [['rtfreq', rtfreq]
          ,['baromin', baromin]
          ,['tempf', tempf]
          ,['dewptf', dewptf]
          ,['humidity', humidity]
          ,['windspeedmph', windspeedmph]
          ,['windgustmph', windgustmph]
          ,['winddir', winddir]
          ,['windgustdir', windgustdir]
          ,['rainin', rainin]
          ,['dailyrainin', dailyrainin]
          ,['indoortempf', indoortempf]
          ,['indoorhumidity', indoorhumidity]
          ,['solarradiation', solarradiation]
          ,['UV', UV]
          ]%}
      {% if i[1] != '' %}
        {% set data.sensors = data.sensors + ['{}={}'.format(i[0], (i[1] if i[0] == 'rtfreq'
                                              else (i[1] | round(3)) | string))] %}
      {% endif %}
    {% endfor %}

    {% set _payload = 'ID=' + wu_station_id %}
    {% set _payload = _payload + '&PASSWORD=' + wu_station_key %}
    {% set _payload = _payload + '&action=updateraww' %}
    {% set _payload = _payload + '&realtime=1' %}
    {% set _payload = _payload + '&dateutc=now' %}
    {% set _payload = _payload + '&' if data.sensors | length > 0 else '' %}
    {% set _payload = _payload + data.sensors | join('&') %}
    {{ _payload }}
  wow_payload: >
    {% set data = namespace(sensors=[]) %}

    {% for i in [['rtfreq', rtfreq]
          ,['baromin', baromin]
          ,['tempf', tempf]
          ,['dewptf', dewptf]
          ,['humidity', humidity]
          ,['windspeedmph', windspeedmph]
          ,['windgustmph', windgustmph]
          ,['winddir', winddir]
          ,['windgustdir', windgustdir]
          ,['rainin', rainin]
          ,['dailyrainin', dailyrainin]
          ]%}
      {% if i[1] != '' %}
        {% set data.sensors = data.sensors + ['{}={}'.format(i[0], (i[1] if i[0] == 'rtfreq'
                                              else (i[1] | round(3)) | string))] %}
      {% endif %}
    {% endfor %}

    {% set _payload = 'siteid=' + wow_site_id %}
    {% set _payload = _payload + '&siteAuthenticationKey=' + wow_site_auth_key %}
    {% set _payload = _payload + '&dateutc=now' %}
    {% set _payload = _payload + '&' if data.sensors | length > 0 else '' %}
    {% set _payload = _payload + data.sensors | join('&') %}
    {% set _payload = _payload + '&softwaretype=homeassistant' %}    
    {{ _payload }}

action:
  - alias: "Check if wu_station_id and wu_station_key exist"
    if: >
      {{      wu_station_id != ''
          and wu_station_key != ''
      }}
    then:
      - service: !input curl_command_service
        data:
          url: "https://weatherstation.wunderground.com/weatherstation/updateweatherstation.php?{{ wu_payload }}"
  - alias: "Wait before next upload if both WU and WOW are configured"
    if: >
      {{      wu_station_id != ''
          and wu_station_key != ''
          and wow_site_id != ''
          and wow_site_auth_key != ''
      }}
    then:
      - delay:
          seconds: "{{ delay | int }}"
  - alias: "Check if wow_site_id and wow_site_auth_key exist"
    if: >
      {{      wow_site_id != ''
          and wow_site_auth_key != ''
      }}
    then:
      - service: !input curl_command_service
        data:
          url: "http://wow.metoffice.gov.uk/automaticreading?{{ wow_payload }}"
  - alias: "Wait to prevent multiple uploads"
    delay:
      seconds: "{{ delay | int }}"