************************************************************** TIME-RELATED CONSTANTS ************************************************************** Calendar day of 1st day in model run time step [seconds] USE 86400 for daily, 43200 for 12hourly, 21600 for 6hourly and 3600 for hourly!! Date of first time step in simulation Date of last time step ************************************************************** FILE PATHS ************************************************************** Output path Path to input base maps Path to input raw meteo maps E:/lisflood_test/Lisvap/meteo/raster ************************************************************** PREFIXES OF OUTPUT METEO VARIABLES ************************************************************** prefix E0 maps prefix ES0 maps prefix ET0 maps ************************************************************** TIMESTEP RELATED PARAMETERS ************************************************************** calendar day number of 1st day in model run e.g. 1st of January: 1; 1st of June 151 (or 152 in leap year) timestep [seconds] Number of first time step in simulation Number of last time step ************************************************************** CONSTANTS ************************************************************** Average solar radiation at top atmosphere [J/m2/s] (I.E.A. 1978) Stefan-Boltzmann constant [J/m2/K4/day] Atmosheric pressure at sea level [mbar] Correction constant in daylength formula [degrees] Albedo of bare soil surface (Supit et. al.) Albedo of water surface (Supit et. al.) Albedo of vegetation canopy (FAO,1998) Estimated value for surface roughness factor of bare soil (Supit et. al.) Estimated value for surface roughness factor of water surface (Supit et. al.) Estimated value for surface roughness factor of vegetation canopy (Supit et. al.) ************************************************************** INPUT METEOROLOGICAL TIMESERIES AS MAPS ************************************************************** Maximum daily temperature Units: [K] if "TemperatureInKelvinFlag" is on, else [C]. Minimum daily temperature Units: [K] if "TemperatureInKelvinFlag" is on, else [C]. TDew - Dew point Temperature used for actual vap pressure Units: [K] if "TemperatureInKelvinFlag" is on, else [C]. Used when the "GLOFAS" option is switched on. Actual vapour pressure [mbar] Used when the "EFAS" option is switched on. If the "CORDEX" option is on, "QairMaps" is used instead. Wind speed at 10 m from surface [m/s] Wind speed U component at 10 m from surface [m/s] Wind speed V component at 10 m from surface [m/s] rgd - calculated solar radiation [J/day/m2] Used when the "EFAS" option is switched on. If the "CORDEX" option is on, the following are used instead: "RdsMaps", "RdlMaps", "RusMaps", "RulMaps". average daily temperature Units: [K] if "TemperatureInKelvinFlag" is on, else [C]. Instantaneous sea level pressure [Pa] 2 m instantaneous specific humidity [kg/kg] Used when the "CORDEX" option is switched on. If the "EFAS" option is on, "EActMaps" is used instead. rds - Downward short wave radiation [W/m2] Used when the "CORDEX" option is switched on. If the "EFAS" option is on, "RgdMaps" is used instead. rdl - Down long wave radiation [W/m2] Used when the "CORDEX" option is switched on. If the "EFAS" option is on, "RgdMaps" is used instead. rus - up short wave radiation [W/m2] Used when the "CORDEX" option is switched on. If the "EFAS" option is on, "RgdMaps" is used instead. rul - up long wave radiation [W/m2] Used when the "CORDEX" option is switched on. If the "EFAS" option is on, "RgdMaps" is used instead. rnl - net long wave radiation [W/m2] Used when the "GLOFAS" option is switched on. ************************************************************** REPORTED OUTPUT MAPS ************************************************************** daily reference evaporation (free water) [mm/day] daily reference evaporation (soil) [mm/day] daily reference evapotranspiration (crop) [mm/day] ************************************************************** REPORTED OUTPUT TIME SERIES ************************************************************** Average temperature [deg C] Potential reference evapotranspiration rate [mm/day] Potential evaporation rate of a free water surface [mm/day] Potential evaporation rate from a bare soil surface [mm/day] ************************************************************** BASE INPUT MAPS ************************************************************** Clone map Digital elevation model [meters a.s.l.] Latitude [decimal degrees]