#
#  Be sure to run `pod spec lint Taylor.podspec' to ensure this is a
#  valid spec and to remove all comments including this before submitting the spec.
#
#  To learn more about Podspec attributes see http://docs.cocoapods.org/specification.html
#  To see working Podspecs in the CocoaPods repo see https://github.com/CocoaPods/Specs/
#

Pod::Spec.new do |s|

  # ―――  Spec Metadata  ―――――――――――――――――――――――――――――――――――――――――――――――――――――――――― #
  #
  #  These will help people to find your library, and whilst it
  #  can feel like a chore to fill in it's definitely to your advantage. The
  #  summary should be tweet-length, and the description more in depth.
  #

  s.name         = "PinLayout"
  s.version      = "1.0.13"
  s.summary      = "Swift manual views layouting without auto layout, fast, no magic, pure code, full control. Concise syntax, readable & chainable."

  # This description is used to generate tags and improve search results.
  #   * Think: What does it do? Why did you write it? What is the focus?
  #   * Try to keep it short, snappy and to the point.
  #   * Write the description between the DESC delimiters below.
  #   * Finally, don't worry about the indent, CocoaPods strips it!
  s.description  = <<-DESC 
  
* Layout one view at a time. 
* Layout most views using a single line
* Stateless
  * The layout system doesn’t add any stored properties to UIViews. It simply compute the UIView.frame property, one view at a time.
  * Since it is stateless, it can be used with any other layout framework without conflicts. 
Each view can use the layout system that better suit it  (PinLayout, constraint, flexbox, grids, …)
A view can be layouted using PinLayout and later with another method.
  * REWORK THAT!!! Stateless also means that if a view reference other views, the view should be re-layouted in layoutSubViews()  layouted with PinLayout use other views as referenced view change (size/position) 

* No constraints
  * Constraints are very verbose and hard for a human brains to understand. Too much information.
  * PinLayout positions views as a designer would explain it (eg: “The TextField is below the Label, aligned left, and is its width match the other view’s width“). 
  * No priorities, simply layout views in the order that make sense. No priority required.

* Before applying the new sets of attributes, PinLayout always start with the view’s current frame. So it’s possible to set the view’s size during the initialization (ex: view.pin.width(100).height(200)), and later only position the view (ex: view.pin.top(10).left(20))

* Minimize as much as possible calculations and constants when layouting views.

* Methods matches as much as possible other layouting system, including CSS, flexbox, reactive Flexbox, …
  * margin, marginHorizontal, marginVertical, marginTop, marginLeft, marginBottom, marginRight
  * top, left, bottom, right, width, height  
  * As in CSS and flexbox, right and bottom coordinates are offset from container’s view right and bottom edges.

* Shorter possible commands to layout views, but keeping english phrasing almost valid.
                   DESC

  s.homepage     = "https://mirego.github.io/PinLayout/"
  # s.screenshots  = "www.example.com/screenshots_1.gif", "www.example.com/screenshots_2.gif"


  # ―――  Spec License  ――――――――――――――――――――――――――――――――――――――――――――――――――――――――――― #
  #
  #  Licensing your code is important. See http://choosealicense.com for more info.
  #  CocoaPods will detect a license file if there is a named LICENSE*
  #  Popular ones are 'MIT', 'BSD' and 'Apache License, Version 2.0'.
  #

  s.license      = "BSD 3-clause"
  # s.license      = { :type => "MIT", :file => "FILE_LICENSE" }


  # ――― Author Metadata  ――――――――――――――――――――――――――――――――――――――――――――――――――――――――― #
  #
  #  Specify the authors of the library, with email addresses. Email addresses
  #  of the authors are extracted from the SCM log. E.g. $ git log. CocoaPods also
  #  accepts just a name if you'd rather not provide an email address.
  #
  #  Specify a social_media_url where others can refer to, for example a twitter
  #  profile URL.
  #

  s.author             = { 
    "Luc Dion" => "ldion@mirego.com"
# TODO Add more
     }
  
  # ――― Platform Specifics ――――――――――――――――――――――――――――――――――――――――――――――――――――――― #
  #
  #  If this Pod runs only on iOS or OS X, then specify the platform and
  #  the deployment target. You can optionally include the target after the platform.
  #

  # s.platform     = :ios
  s.platform     = :ios, "8.0"

  #  When using multiple platforms
  # s.ios.deployment_target = "5.0"
  # s.osx.deployment_target = "10.7"
  # s.watchos.deployment_target = "2.0"
  # s.tvos.deployment_target = "9.0"


  # ――― Source Location ―――――――――――――――――――――――――――――――――――――――――――――――――――――――――― #
  #
  #  Specify the location from where the source should be retrieved.
  #  Supports git, hg, bzr, svn and HTTP.
  #

  s.source       = { :git => "https://github.com/mirego/PinLayout.git", :tag => "#{s.version}" }


  # ――― Source Code ―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――― #
  #
  #  CocoaPods is smart about how it includes source code. For source files
  #  giving a folder will include any swift, h, m, mm, c & cpp files.
  #  For header files it will include any header in the folder.
  #  Not including the public_header_files will make all headers public.
  #

  s.source_files  = "Sources/**/*.swift"


  # ――― Resources ―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――― #
  #
  #  A list of resources included with the Pod. These are copied into the
  #  target bundle with a build phase script. Anything else will be cleaned.
  #  You can preserve files from being cleaned, please don't preserve
  #  non-essential files like tests, examples and documentation.
  #

  # s.resource  = "icon.png"
  # s.resources = "Resources/*.png"
  # s.preserve_paths = "FilesToSave", "MoreFilesToSave"


  # ――― Project Linking ―――――――――――――――――――――――――――――――――――――――――――――――――――――――――― #
  #
  #  Link your library with frameworks, or libraries. Libraries do not include
  #  the lib prefix of their name.
  #

  # s.framework  = "SomeFramework"
  # s.frameworks = "SomeFramework", "AnotherFramework"

  # s.library   = "iconv"
  # s.libraries = "iconv", "xml2"


  # ――― Project Settings ――――――――――――――――――――――――――――――――――――――――――――――――――――――――― #
  #
  #  If your library depends on compiler flags you can set them in the xcconfig hash
  #  where they will only apply to your library. If you depend on other Podspecs
  #  you can include multiple dependencies to ensure it works.

  # s.requires_arc = true

  # s.xcconfig = { "HEADER_SEARCH_PATHS" => "$(SDKROOT)/usr/include/libxml2" }
  # s.dependency "JSONKit", "~> 1.4"

end