/**
 *
 *  Inovelli 2-Channel Smart Plug
 *   
 *  github: Eric Maycock (erocm123)
 *  Date: 2018-06-13
 *  Copyright 2018 Eric Maycock
 *
 *  Includes all configuration parameters and ease of advanced configuration. 
 *
 *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
 *  in compliance with the License. You may obtain a copy of the License at:
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
 *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
 *  for the specific language governing permissions and limitations under the License.
 *
  *  2018-06-13: Modified tile layout. Update firmware version reporting.
 * 
 */
metadata {
    definition(name: "Inovelli 2-Channel Smart Plug (Alternate)", namespace: "erocm123", author: "Eric Maycock", vid: "generic-switch") {
        capability "Actuator"
        capability "Sensor"
        capability "Switch"
        capability "Polling"
        capability "Refresh"
        //capability "Health Check"
        
        attribute "lastActivity", "String"
        attribute "lastEvent", "String"
        attribute "firmware", "String"
        
        fingerprint mfr: "015D", prod: "0221", model: "251C"
        fingerprint mfr: "0312", prod: "B221", model: "251C"
        fingerprint deviceId: "0x1001", inClusters: "0x5E,0x85,0x59,0x5A,0x72,0x60,0x8E,0x73,0x27,0x25,0x86"
    }
    simulator {}
    preferences {}
    tiles {
        multiAttributeTile(name: "switch", type: "lighting", width: 6, height: 4, canChangeIcon: true) {
            tileAttribute("device.switch", key: "PRIMARY_CONTROL") {
                attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
                attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00a0dc", nextState: "turningOff"
                attributeState "turningOff", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
                attributeState "turningOn", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00a0dc", nextState: "turningOff"
            }
        }
        childDeviceTiles("all")
        valueTile("lastActivity", "device.lastActivity", inactiveLabel: false, decoration: "flat", width: 4, height: 1) {
            state "default", label: 'Last Activity: ${currentValue}',icon: "st.Health & Wellness.health9"
        }
        
        valueTile("firmware", "device.firmware", inactiveLabel: false, decoration: "flat", width: 2, height: 1) {
            state "default", label: 'fw: ${currentValue}', icon: ""
        }
        
        
        valueTile("icon", "device.icon", inactiveLabel: false, decoration: "flat", width: 5, height: 1) {
            state "default", label: '', icon: "https://inovelli.com/wp-content/uploads/Device-Handler/Inovelli-Device-Handler-Logo.png"
        }
        
        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 1, height: 1) {
            state "default", label: "", action: "refresh.refresh", icon: "st.secondary.refresh"
        }

    }
}
def parse(String description) {
    def result = []
    def cmd = zwave.parse(description)
    if (cmd) {
        result += zwaveEvent(cmd)
        logging("Parsed ${cmd} to ${result.inspect()}", 1)
    } else {
        logging("Non-parsed event: ${description}", 2)
    }
    def now
    if(location.timeZone)
    now = new Date().format("yyyy MMM dd EEE h:mm:ss a", location.timeZone)
    else
    now = new Date().format("yyyy MMM dd EEE h:mm:ss a")
    sendEvent(name: "lastActivity", value: now, displayed:false)
    return result
}
def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd, ep = null) {
    logging("BasicReport ${cmd} - ep ${ep}", 2)
    if (ep) {
        def event
        childDevices.each {
            childDevice ->
                if (childDevice.deviceNetworkId == "$device.deviceNetworkId-ep$ep") {
                    childDevice.sendEvent(name: "switch", value: cmd.value ? "on" : "off")
                }
        }
        if (cmd.value) {
            event = [createEvent([name: "switch", value: "on"])]
        } else {
            def allOff = true
            childDevices.each {
                n ->
                    if (n.currentState("switch").value != "off") allOff = false
            }
            if (allOff) {
                event = [createEvent([name: "switch", value: "off"])]
            } else {
                event = [createEvent([name: "switch", value: "on"])]
            }
        }
        return event
    }
}
def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
    logging("BasicSet ${cmd}", 2)
    def result = createEvent(name: "switch", value: cmd.value ? "on" : "off", type: "digital")
    def cmds = []
    cmds << encap(zwave.switchBinaryV1.switchBinaryGet(), 1)
    cmds << encap(zwave.switchBinaryV1.switchBinaryGet(), 2)
    return [result, response(commands(cmds))] // returns the result of reponse()
}
def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd, ep = null) {
    logging("SwitchBinaryReport ${cmd} - ep ${ep}", 2)
    if (ep) {
        def event
        def childDevice = childDevices.find {
            it.deviceNetworkId == "$device.deviceNetworkId-ep$ep"
        }
        if (childDevice) childDevice.sendEvent(name: "switch", value: cmd.value ? "on" : "off")
        if (cmd.value) {
            event = [createEvent([name: "switch", value: "on"])]
        } else {
            def allOff = true
            childDevices.each {
                n->
                    if (n.deviceNetworkId != "$device.deviceNetworkId-ep$ep" && n.currentState("switch").value != "off") allOff = false
            }
            if (allOff) {
                event = [createEvent([name: "switch", value: "off"])]
            } else {
                event = [createEvent([name: "switch", value: "on"])]
            }
        }
        return event
    } else {
        def result = createEvent(name: "switch", value: cmd.value ? "on" : "off", type: "digital")
        def cmds = []
        cmds << encap(zwave.switchBinaryV1.switchBinaryGet(), 1)
        cmds << encap(zwave.switchBinaryV1.switchBinaryGet(), 2)
        return [result, response(commands(cmds))] // returns the result of reponse()
    }
}
def zwaveEvent(physicalgraph.zwave.commands.multichannelv3.MultiChannelCmdEncap cmd) {
    logging("MultiChannelCmdEncap ${cmd}", 2)
    def encapsulatedCommand = cmd.encapsulatedCommand([0x32: 3, 0x25: 1, 0x20: 1])
    if (encapsulatedCommand) {
        zwaveEvent(encapsulatedCommand, cmd.sourceEndPoint as Integer)
    }
}
def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
    logging("ManufacturerSpecificReport ${cmd}", 2)
    def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
    logging("msr: $msr", 2)
    updateDataValue("MSR", msr)
}
def zwaveEvent(physicalgraph.zwave.Command cmd) {
    // This will capture any commands not handled by other instances of zwaveEvent
    // and is recommended for development so you can see every command the device sends
    logging("Unhandled Event: ${cmd}", 2)
}
def on() {
    logging("on()", 1)
    commands([
        zwave.switchAllV1.switchAllOn(),
        encap(zwave.switchBinaryV1.switchBinaryGet(), 1),
        encap(zwave.switchBinaryV1.switchBinaryGet(), 2)
    ])
}
def off() {
    logging("off()", 1)
    commands([
        zwave.switchAllV1.switchAllOff(),
        encap(zwave.switchBinaryV1.switchBinaryGet(), 1),
        encap(zwave.switchBinaryV1.switchBinaryGet(), 2)
    ])
}
void childOn(String dni) {
    logging("childOn($dni)", 1)
    def cmds = []
    cmds << new physicalgraph.device.HubAction(command(encap(zwave.basicV1.basicSet(value: 0xFF), channelNumber(dni))))
    cmds << new physicalgraph.device.HubAction(command(encap(zwave.switchBinaryV1.switchBinaryGet(), channelNumber(dni))))
    sendHubCommand(cmds, 1000)
}
void childOff(String dni) {
    logging("childOff($dni)", 1)
    def cmds = []
    cmds << new physicalgraph.device.HubAction(command(encap(zwave.basicV1.basicSet(value: 0x00), channelNumber(dni))))
    cmds << new physicalgraph.device.HubAction(command(encap(zwave.switchBinaryV1.switchBinaryGet(), channelNumber(dni))))
    sendHubCommand(cmds, 1000)
}
void childRefresh(String dni) {
    logging("childRefresh($dni)", 1)
    def cmds = []
    cmds << new physicalgraph.device.HubAction(command(encap(zwave.switchBinaryV1.switchBinaryGet(), channelNumber(dni))))
    sendHubCommand(cmds, 1000)
}
def poll() {
    logging("poll()", 1)
    commands([
        encap(zwave.switchBinaryV1.switchBinaryGet(), 1),
        encap(zwave.switchBinaryV1.switchBinaryGet(), 2),
    ])
}
def refresh() {
    logging("refresh()", 1)
    commands([
        encap(zwave.switchBinaryV1.switchBinaryGet(), 1),
        encap(zwave.switchBinaryV1.switchBinaryGet(), 2),
    ])
}
def ping() {
    logging("ping()", 1)
    refresh()
}
def installed() {
    logging("installed()", 1)
    command(zwave.manufacturerSpecificV1.manufacturerSpecificGet())
    createChildDevices()
}
def updated() {
    logging("updated()", 1)
    if (!childDevices) {
        createChildDevices()
    } else if (device.label != state.oldLabel) {
        childDevices.each {
            if (it.label == "${state.oldLabel} (CH${channelNumber(it.deviceNetworkId)})") {
                def newLabel = "${device.displayName} (CH${channelNumber(it.deviceNetworkId)})"
                it.setLabel(newLabel)
            }
        }
        state.oldLabel = device.label
    }
    sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
    sendEvent(name: "needUpdate", value: device.currentValue("needUpdate"), displayed: false, isStateChange: true)
    return command(zwave.versionV1.versionGet())
}
def zwaveEvent(physicalgraph.zwave.commands.configurationv2.ConfigurationReport cmd) {
    logging("${device.displayName} parameter '${cmd.parameterNumber}' with a byte size of '${cmd.size}' is set to '${cmd2Integer(cmd.configurationValue)}'", 2)
}
private encap(cmd, endpoint) {
    if (endpoint) {
        zwave.multiChannelV3.multiChannelCmdEncap(destinationEndPoint: endpoint).encapsulate(cmd)
    } else {
        cmd
    }
}
private command(physicalgraph.zwave.Command cmd) {
    if (state.sec) {
        zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
    } else {
        cmd.format()
    }
}
private commands(commands, delay = 1000) {
    delayBetween(commands.collect {
        command(it)
    }, delay)
}
private channelNumber(String dni) {
    dni.split("-ep")[-1] as Integer
}
private void createChildDevices() {
    state.oldLabel = device.label
    try {
        for (i in 1..2) {
            addChildDevice("Switch Child Device", "${device.deviceNetworkId}-ep${i}", null, [completedSetup: true, label: "${device.displayName} (CH${i})",
                isComponent: false
            ])
        }
    } catch (e) {
        runIn(2, "sendAlert")
    }
}
private sendAlert() {
    sendEvent(descriptionText: "Child device creation failed. Please make sure that the \"Switch Child Device\" is installed and published.", eventType: "ALERT", name: "childDeviceCreation", value: "failed", displayed: true, )
}
private def logging(message, level) {
    if (logLevel != "0") {
        switch (logLevel) {
            case "1":
                if (level > 1) log.debug "$message"
                break
            case "99":
                log.debug "$message"
                break
        }
    }
}
def configuration_model()
{
'''
<configuration>
  <Value type="list" index="logLevel" label="Debug Logging Level?" value="0" setting_type="preference" fw="">
    <Help>
    </Help>
        <Item label="None" value="0" />
        <Item label="Reports" value="1" />
        <Item label="All" value="99" />
  </Value>
</configuration>
'''
}