---
eip: 1057
title: ProgPoW, a Programmatic Proof-of-Work
author: Radix Pi <radix.pi.314@gmail.com>, Ifdef Else <ifdefelse@protonmail.com>   
discussions-to: https://ethereum-magicians.org/t/eip-progpow-a-programmatic-proof-of-work/272
status: Draft
type: Standards Track
category: Core
created: 2018-05-02
---

## Simple Summary

The following is a proposal for an alternate proof-of-work algorithm - **“ProgPoW”** -  tuned for commodity hardware in order to close the efficiency gap available to specialized ASICs.

## Abstract

The security of proof-of-work is built on a fair, randomized lottery where miners with similar resources have a similar chance of generating the next block.  

For Ethereum - a community based on widely distributed commodity hardware - specialized ASICs enable certain participants to gain a much greater chance of generating the next block, and undermine the distributed security.

ASIC-resistance is a misunderstood problem. FPGAs, GPUs and CPUs can themselves be considered ASICs. Any algorithm that executes on a commodity ASIC can have a specialized ASIC made for it; most existing algorithms provide opportunities that reduce power usage and cost. Thus, the proper question to ask when solving ASIC-resistance is “how much more efficient will a specialized ASIC be, in comparison with commodity hardware?” 

EIP<NaN> presents an algorithm that is tuned for commodity GPUs where there is minimal opportunity for ASIC specialization.  This prevents specialized ASICs without resorting to a game of whack-a-mole where the network changes algorithms every few months.

## Motivation

Until Ethereum transitions to a pure proof-of-stake model, proof-of-work will continue to be a part of the security of the network - whether it’s adapted into a hybrid model (as is the case of Casper FFG), or adopted by a hard fork.

Ethash allows for the creation of an ASIC that is roughly twice as efficient as a commodity GPU.  Ethash’s memory accesses are paired with a very small amount of fixed compute.  Most of a GPU’s capacity and complexity sits idle, wasting power, while waiting for DRAM accesses. A specialized ASIC can implement a much smaller (and cheaper) compute engine that burns much less power.

As miner rewards are reduced with Casper FFG, it will remain profitable to mine on a specialized ASIC long after GPUs have exited the network. This will make it easier for an entity that has access to private ASICs to stage a 51% attack on the Ethereum network. 

## Specification

ProgPoW is based on Ethash and follows the same general structure. The algorithm has five main changes from Ethash, each tuned for commodity GPUs while minimizing the possible advantage of a specialized ASIC.

The name of the algorithm comes from the fact that the inner loop between global memory accesses is a randomly generated program based on the block number.  The random program is designed to both run efficiently on commodity GPUs and also cover most of the GPU's functionality.  The random program sequence prevents the creation of a fixed pipeline implementation as seen in a specialized ASIC.  The access size has also been tweaked to match contemporary GPUs.

In contrast to Ethash, the changes detailed below make ProgPoW dependent on the core compute capabilities in addition to memory bandwidth and size.

**Changes keccak_f1600 (with 64-bit words) to keccak_f800 (with 32-bit words).**

*On 64-bit architectures f1600 processes twice as many bits as f800 in roughly the same time.  As GPUs are natively 32-bit architectures, f1600 takes twice as long as f800.  ProgPow doesn’t require all the bits f1600 can consume, thus reducing the size reduces the optimization opportunity for a specialized ASIC.*

**Increases mix state.**

*A significant part of a GPU’s area, power, and complexity is the large register file.  A large mix state ensures that a specialized ASIC would need to implement similar state storage, limiting any advantage.*

**Adds a random sequence of math in the main loop.**

*The random math changes every 50 blocks to amortize compilation overhead. Having a random sequence of math that reads and writes random locations within the state ensures that the ASIC executing the algorithm is fully programmable.  There is no possibility to create an ASIC with a fixed pipeline that is much faster or lower power.*

**Adds reads from a small, low-latency cache that supports random addresses.**

*Another significant part of a GPU’s area, power, and complexity is the memory hierarchy.  Adding cached reads makes use of this hierarchy and ensures that a specialized ASIC also implements a similar hierarchy, preventing power or area savings.*

**Increases the DRAM read from 128 bytes to 256 bytes.**

*The DRAM read from the DAG is the same as Ethash’s, but with the size increased to `256 bytes`. This better matches the workloads seen on commodity GPUs, preventing a specialized ASIC from being able to gain performance by optimizing the memory controller for abnormally small accesses.* 

The DAG file is generated according to traditional Ethash specifications, with an additional `PROGPOW_SIZE_CACHE` bytes generated that will be cached in the L1.

ProgPoW can be tuned using the following parameters.  The proposed settings have been tuned for a range of existing, commodity GPUs:

* `PROGPOW_LANES:` The number of parallel lanes that coordinate to calculate a single hash instance; default is `32.`
* `PROGPOW_REGS:` The register file usage size; default is `16.` 
* `PROGPOW_CACHE_BYTES:` The size of the cache; default is `16 x 1024.`
* `PROGPOW_CNT_MEM:` The number of frame buffer accesses, defined as the outer loop of the algorithm; default is `64` (same as Ethash).
* `PROGPOW_CNT_CACHE:` The number of cache accesses per loop; default is `8.`
* `PROGPOW_CNT_MATH:` The number of math operations per loop; default is `8.`

ProgPoW uses **FNV1a** for merging data. The existing Ethash uses FNV1 for merging, but FNV1a provides better distribution properties.

ProgPow uses [KISS99](https://en.wikipedia.org/wiki/KISS_(algorithm)) for random number generation. This is the simplest (fewest instruction) random generator that passes the TestU01 statistical test suite.  A more complex random number generator like Mersenne Twister can be efficiently implemented on a specialized ASIC, providing an opportunity for efficiency gains.

```cpp

uint32_t fnv1a(uint32_t &h, uint32_t d)
{
    return h = (h ^ d) * 0x1000193;
}

typedef struct {
    uint32_t z, w, jsr, jcong;
} kiss99_t;

// KISS99 is simple, fast, and passes the TestU01 suite
// https://en.wikipedia.org/wiki/KISS_(algorithm)
// http://www.cse.yorku.ca/~oz/marsaglia-rng.html
uint32_t kiss99(kiss99_t &st)
{
    uint32_t znew = (st.z = 36969 * (st.z & 65535) + (st.z >> 16));
    uint32_t wnew = (st.w = 18000 * (st.w & 65535) + (st.w >> 16));
    uint32_t MWC = ((znew << 16) + wnew);
    uint32_t SHR3 = (st.jsr ^= (st.jsr << 17), st.jsr ^= (st.jsr >> 13), st.jsr ^= (st.jsr << 5));
    uint32_t CONG = (st.jcong = 69069 * st.jcong + 1234567);
    return ((MWC^CONG) + SHR3);
}
```

The `LANES*REGS` of mix data is initialized from the hash’s seed.

```cpp
void fill_mix(
    uint64_t hash_seed,
    uint32_t lane_id,
    uint32_t mix[PROGPOW_REGS]
)
{
    // Use FNV to expand the per-warp seed to per-lane
    // Use KISS to expand the per-lane seed to fill mix
    uint32_t fnv_hash = 0x811c9dc5;
    kiss99_t st;
    st.z = fnv1a(fnv_hash, seed);
    st.w = fnv1a(fnv_hash, seed >> 32);
    st.jsr = fnv1a(fnv_hash, lane_id);
    st.jcong = fnv1a(fnv_hash, lane_id);
    for (int i = 0; i < PROGPOW_REGS; i++)
            mix[i] = kiss99(st);
}
```

The main search algorithm uses the Keccak sponge function (a width of 800 bits, with a bitrate of 448, and a capacity of 352) to generate a seed, expands the seed, does a sequence of loads and random math on the mix data, and then compresses the result into a final Keccak permutation (with the same parameters as the first) for target comparison.

```cpp

bool progpow_search(
    const uint64_t prog_seed,
    const uint64_t nonce,
    const hash32_t header,
    const uint64_t target,
    const uint64_t *g_dag, // gigabyte DAG located in framebuffer
    const uint64_t *c_dag  // kilobyte DAG located in l1 cache
)
{
    uint32_t mix[PROGPOW_LANES][PROGPOW_REGS];
    uint32_t result[4];
    for (int i = 0; i < 4; i++)
        result[i] = 0;

    // keccak(header..nonce)
    uint64_t seed = keccak_f800(header, nonce, result);

    // initialize mix for all lanes
    for (int l = 0; l < PROGPOW_LANES; l++)
        fill_mix(seed, l, mix);

    // execute the randomly generated inner loop
    for (int i = 0; i < PROGPOW_CNT_MEM; i++)
        progPowLoop(prog_seed, i, mix, g_dag, c_dag);

    // Reduce mix data to a single per-lane result
    uint32_t lane_hash[PROGPOW_LANES];
    for (int l = 0; l < PROGPOW_LANES; l++)
    {
        lane_hash[l] = 0x811c9dc5
        for (int i = 0; i < PROGPOW_REGS; i++)
            fnv1a(lane_hash[l], mix[l][i]);
    }
    // Reduce all lanes to a single 128-bit result
    for (int i = 0; i < 4; i++)
        result[i] = 0x811c9dc5;
    for (int l = 0; l < PROGPOW_LANES; l++)
        fnv1a(result[l%4], lane_hash[l])

    // keccak(header .. keccak(header..nonce) .. result);
    return (keccak_f800(header, seed, result) <= target);
}
```

The inner loop uses FNV and KISS99 to generate a random sequence from the `prog_seed`.  This random sequence determines which mix state is accessed and what random math is performed. Since the `prog_seed` changes relatively infrequently it is expected that `progPowLoop` will be compiled while mining instead of interpreted on the fly.

```cpp

kiss99_t progPowInit(uint64_t prog_seed, int mix_seq[PROGPOW_REGS])
{
    kiss99_t prog_rnd;
    uint32_t fnv_hash = 0x811c9dc5;
    prog_rnd.z = fnv1a(fnv_hash, prog_seed);
    prog_rnd.w = fnv1a(fnv_hash, prog_seed >> 32);
    prog_rnd.jsr = fnv1a(fnv_hash, prog_seed);
    prog_rnd.jcong = fnv1a(fnv_hash, prog_seed >> 32);
    // Create a random sequence of mix destinations for merge()
    // guaranteeing every location is touched once
    // Uses Fisher–Yates shuffle
    for (int i = 0; i < PROGPOW_REGS; i++)
        mix_seq[i] = i;
    for (int i = PROGPOW_REGS - 1; i > 0; i--)
    {
        int j = kiss99(prog_rnd) % (i + 1);
        swap(mix_seq[i], mix_seq[j]);
    }
    return prog_rnd;
}
```

The math operations that merge values into the mix data are ones chosen to maintain entropy.

```cpp
// Merge new data from b into the value in a
// Assuming A has high entropy only do ops that retain entropy
// even if B is low entropy
// (IE don't do A&B)
void merge(uint32_t &a, uint32_t b, uint32_t r)
{
    switch (r % 4)
    {
    case 0: a = (a * 33) + b; break;
    case 1: a = (a ^ b) * 33; break;
    case 2: a = ROTL32(a, ((r >> 16) % 32)) ^ b; break;
    case 3: a = ROTR32(a, ((r >> 16) % 32)) ^ b; break;
    }
}
```

The math operations chosen for the random math are ones that are easy to implement in CUDA and OpenCL, the two main programming languages for commodity GPUs.

```cpp
// Random math between two input values
uint32_t math(uint32_t a, uint32_t b, uint32_t r)
{
    switch (r % 11)
    {
    case 0: return a + b;
    case 1: return a * b;
    case 2: return mul_hi(a, b);
    case 3: return min(a, b);
    case 4: return ROTL32(a, b);
    case 5: return ROTR32(a, b);
    case 6: return a & b;
    case 7: return a | b;
    case 8: return a ^ b;
    case 9: return clz(a) + clz(b);
    case 10: return popcount(a) + popcount(b);
    }
}
```

The main loop:

```cpp
// Helper to get the next value in the per-program random sequence
#define rnd()    (kiss99(prog_rnd))
// Helper to pick a random mix location
#define mix_src() (rnd() % PROGPOW_REGS)
// Helper to access the sequence of mix destinations
#define mix_dst() (mix_seq[(mix_seq_cnt++)%PROGPOW_REGS])

void progPowLoop(
    const uint64_t prog_seed,
    const uint32_t loop,
    uint32_t mix[PROGPOW_LANES][PROGPOW_REGS],
    const uint64_t *g_dag,
    const uint32_t *c_dag)
{
    // All lanes share a base address for the global load
    // Global offset uses mix[0] to guarantee it depends on the load result
    uint32_t offset_g = mix[loop%PROGPOW_LANES][0] % DAG_SIZE;
    // Lanes can execute in parallel and will be convergent
    for (int l = 0; l < PROGPOW_LANES; l++)
    {
        // global load to sequential locations
        uint64_t data64 = g_dag[offset_g + l];

        // initialize the seed and mix destination sequence
        int mix_seq[PROGPOW_REGS];
        int mix_seq_cnt = 0;
        kiss99_t prog_rnd = progPowInit(prog_seed, mix_seq);

        uint32_t offset, data32;
        int max_i = max(PROGPOW_CNT_CACHE, PROGPOW_CNT_MATH);
        for (int i = 0; i < max_i; i++)
        {
            if (i < PROGPOW_CNT_CACHE)
            {
                // Cached memory access
                // lanes access random location
                offset = mix[l][mix_src()] % PROGPOW_CACHE_WORDS;
                data32 = c_dag[offset];
                merge(mix[l][mix_dst()], data32, rnd());
            }
            if (i < PROGPOW_CNT_MATH)
            {
                // Random Math
                data32 = math(mix[l][mix_src()], mix[l][mix_src()], rnd());
                merge(mix[l][mix_dst()], data32, rnd());
            }
        }
        // Consume the global load data at the very end of the loop
        // Allows full latency hiding
        merge(mix[l][0], data64, rnd());
        merge(mix[l][mix_dst()], data64>>32, rnd());
    }
}
```

## Rationale

ProgPoW utilizes almost all parts of a commodity GPU, excluding:

* The graphics pipeline (displays, geometry engines, texturing, etc);
* Floating point math.

Making use of either of these would have significant portability issues between commodity hardware vendors, and across programming languages.

Since the GPU is almost fully utilized, there’s little opportunity  for specialized ASICs to gain efficiency. Removing both the graphics pipeline and floating point math could provide up to 1.2x gains in efficiency, compared to the 2x gains possible in Ethash, and 50x gains possible for CryptoNight.

## Backwards Compatibility

This algorithm is not backwards compatible with the existing Ethash, and will require a fork for adoption. Furthermore, the network hashrate will halve as the time spent in the core is now balanced with time spent in memory.

## Test Cases

This PoW algorithm was tested against six different models from two different manufacturers. Selected models span two different chips and memory types from each manufacturer (Polaris20-GDDR5 and Vega10-HBM2 for AMD; GP104-GDDR5 and GP102-GDDR5X for NVIDIA). The average hashrate results are listed below. Additional tests are ongoing.

As the algorithm nearly fully utilizes GPU functions in a natural way, the results reflect relative GPU performance that is similar to other gaming and graphics applications.

-------------------------------
| Model     | Hashrate (MH/s) |
| --------- | --------------- |
| RX580     |      9.4        |
| Vega56    |      16.6       |
| Vega64    |      18.7       |
| GTX1070Ti |      13.1       |
| GTX1080   |      14.9       |
| GTX1080Ti |      21.8       |
-------------------------------

## Implementation

Please refer to the official code located at [ProgPOW](https://github.com/ifdefelse/ProgPOW) for the full code, implemented in the standard ethminer. 

## Copyright

Copyright and related rights waived via [CC0](https://creativecommons.org/publicdomain/zero/1.0/).