# Build Guide Tilting / Tenting plate

## Parts

| Name | Count | Remarks |
|:-|:-|:-|
| Completed Corne Cherry | 1 set | Corne Chocolate / 3mm top plate is not supported |
| Middle plate 3mm | 2 sheets | |
| Bottom plate 3mm | 2 sheets | |
| Bolt M5 15mm ~ 50mm | 8 bolts | |
| Nut M5 | 16 pieces | |
| Screw M2 6mm | 10 screws | |
| Screw M2 4mm | 10 screws | |
| Spacer M2 3.5mm | 10 pieces | |
| Cushion rubber | 8 pieces | |

## Advance preparation

![lrg_dsc05736](https://user-images.githubusercontent.com/736191/53021652-1185c500-349d-11e9-86a8-187298d968f8.JPG)

Remove the key switch from the finished Corne Cherry
to separate the body from the top plate.
No other parts are needed.

## Assembly

![lrg_dsc05737](https://user-images.githubusercontent.com/736191/53021653-121e5b80-349d-11e9-94b6-72067880d42f.JPG)
![lrg_dsc05739](https://user-images.githubusercontent.com/736191/53021654-121e5b80-349d-11e9-9031-728645391232.JPG)

Check the required parts.
Check the dedicated middle plate and bottom plate, and bolts of various lengths.
In addition, use screws, nuts, spacers, etc. (see the parts section for details).

![lrg_dsc05742](https://user-images.githubusercontent.com/736191/53021658-12b6f200-349d-11e9-87d0-749a266740ee.JPG)

Secure the middle plate to the top plate with 6mm screws and 3.5mm spacers.

![lrg_dsc05744](https://user-images.githubusercontent.com/736191/53021659-12b6f200-349d-11e9-95ff-f252075f5b3c.JPG)
Secure the OLED display protection plate with 4mm screws.

![lrg_dsc05745](https://user-images.githubusercontent.com/736191/53021660-12b6f200-349d-11e9-8620-f02c399e7106.JPG)

Secure the body and bottom plate with 4mm screws.

![lrg_dsc05747](https://user-images.githubusercontent.com/736191/53021661-134f8880-349d-11e9-8dd6-17ff762be93a.JPG)

Insert an acrylic spacer between the middle plate
and the bottom plate and attach the bolts.

![lrg_dsc05748](https://user-images.githubusercontent.com/736191/53021662-134f8880-349d-11e9-8d0e-d0b02657436b.JPG)

It is recommended to temporarily assemble the bolts
and adjust the height before completely fixing them with nuts.
Temporary assembly can be done easily by passing only one nut through the bolt.

![lrg_dsc05749](https://user-images.githubusercontent.com/736191/53021665-134f8880-349d-11e9-9db8-9952a40eb240.JPG)
![lrg_dsc05750](https://user-images.githubusercontent.com/736191/53021666-134f8880-349d-11e9-9c8e-85615d6dd9b6.JPG)

It is completed by firmly fixing it so that it is sandwiched between nuts.

![lrg_dsc05761](https://user-images.githubusercontent.com/736191/53021667-13e81f00-349d-11e9-9bc8-051e68fde6eb.JPG)