# # vim:fileencoding=utf-8:ft=conf:foldmethod=marker

# #: Fonts {{{

# #: kitty has very powerful font management. You can configure
# #: individual font faces and even specify special fonts for particular
# #: characters.

font_family      JetBrainsMono Nerd Font Medium
bold_font        JetBrainsMono Nerd Font Bold
italic_font      JetBrainsMono Nerd Font Italic
bold_italic_font JetBrainsMono Nerd Font Bold Italic

# #: You can specify different fonts for the bold/italic/bold-italic
# #: variants. To get a full list of supported fonts use the `kitty
# #: list-fonts` command. By default they are derived automatically, by
# #: the OSes font system. Setting them manually is useful for font
# #: families that have many weight variants like Book, Medium, Thick,
# #: etc. For example::

# #:     font_family      Operator Mono Book
# #:     bold_font        Operator Mono Medium
# #:     italic_font      Operator Mono Book Italic
# #:     bold_italic_font Operator Mono Medium Italic

# font_size 22.0

# #: Font size (in pts)

# adjust_line_height  92%
# # adjust_column_width 0

# #: Change the size of each character cell kitty renders. You can use
# #: either numbers, which are interpreted as pixels or percentages
# #: (number followed by %), which are interpreted as percentages of the
# #: unmodified values. You can use negative pixels or percentages less
# #: than 100% to reduce sizes (but this might cause rendering
# #: artifacts).

# # symbol_map U+E0A0-U+E0A2,U+E0B0-U+E0B3 PowerlineSymbols

# #: Map the specified unicode codepoints to a particular font. Useful
# #: if you need special rendering for some symbols, such as for
# #: Powerline. Avoids the need for patched fonts. Each unicode code
# #: point is specified in the form U+<code point in hexadecimal>. You
# #: can specify multiple code points, separated by commas and ranges
# #: separated by hyphens. symbol_map itself can be specified multiple
# #: times. Syntax is::

# #:     symbol_map codepoints Font Family Name

# # disable_ligatures never

# #: Choose how you want to handle multi-character ligatures. The
# #: default is to always render them.  You can tell kitty to not render
# #: them when the cursor is over them by using cursor to make editing
# #: easier, or have kitty never render them at all by using always, if
# #: you don't like them. The ligature strategy can be set per-window
# #: either using the kitty remote control facility or by defining
# #: shortcuts for it in kitty.conf, for example::

# #:     map alt+1 disable_ligatures_in active always
# #:     map alt+2 disable_ligatures_in all never
# #:     map alt+3 disable_ligatures_in tab cursor

# # box_drawing_scale 0.001, 1, 1.5, 2

# #: Change the sizes of the lines used for the box drawing unicode
# #: characters These values are in pts. They will be scaled by the
# #: monitor DPI to arrive at a pixel value. There must be four values
# #: corresponding to thin, normal, thick, and very thick lines.

# #: }}}

# #: Cursor customization {{{

# # cursor #ffd17f

# #: Default cursor color

# # cursor_text_color background

# #: Choose the color of text under the cursor. If you want it rendered
# #: with the background color of the cell underneath instead, use the
# #: special keyword: background

# # cursor_shape block

# #: The cursor shape can be one of (block, beam, underline)

# # cursor_blink_interval -1

# #: The interval (in seconds) at which to blink the cursor. Set to zero
# #: to disable blinking. Negative values mean use system default. Note
# #: that numbers smaller than repaint_delay will be limited to
# #: repaint_delay.

# # cursor_stop_blinking_after 15.0

# #: Stop blinking cursor after the specified number of seconds of
# #: keyboard inactivity.  Set to zero to never stop blinking.

# #: }}}

# #: Scrollback {{{

# # scrollback_lines 2000

# #: Number of lines of history to keep in memory for scrolling back.
# #: Memory is allocated on demand. Negative numbers are (effectively)
# #: infinite scrollback. Note that using very large scrollback is not
# #: recommended as it can slow down resizing of the terminal and also
# #: use large amounts of RAM.

# # scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER

# #: Program with which to view scrollback in a new window. The
# #: scrollback buffer is passed as STDIN to this program. If you change
# #: it, make sure the program you use can handle ANSI escape sequences
# #: for colors and text formatting. INPUT_LINE_NUMBER in the command
# #: line above will be replaced by an integer representing which line
# #: should be at the top of the screen.

# # scrollback_pager_history_size 0

# #: Separate scrollback history size, used only for browsing the
# #: scrollback buffer (in MB). This separate buffer is not available
# #: for interactive scrolling but will be piped to the pager program
# #: when viewing scrollback buffer in a separate window. The current
# #: implementation stores one character in 4 bytes, so approximatively
# #: 2500 lines per megabyte at 100 chars per line. A value of zero or
# #: less disables this feature. The maximum allowed size is 4GB.

# # wheel_scroll_multiplier 5.0

# #: Modify the amount scrolled by the mouse wheel. Note this is only
# #: used for low precision scrolling devices, not for high precision
# #: scrolling on platforms such as macOS and Wayland. Use negative
# #: numbers to change scroll direction.

# # touch_scroll_multiplier 1.0

# #: Modify the amount scrolled by a touchpad. Note this is only used
# #: for high precision scrolling devices on platforms such as macOS and
# #: Wayland. Use negative numbers to change scroll direction.

# #: }}}

# #: Mouse {{{

# # mouse_hide_wait 0.0

# #: Hide mouse cursor after the specified number of seconds of the
# #: mouse not being used. Set to zero to disable mouse cursor hiding.
# #: Set to a negative value to hide the mouse cursor immediately when
# #: typing text. Disabled by default on macOS as getting it to work
# #: robustly with the ever-changing sea of bugs that is Cocoa is too
# #: much effort.

# # url_color #0087bd
# # url_style curly

# #: The color and style for highlighting URLs on mouse-over. url_style
# #: can be one of: none, single, double, curly

# # open_url_modifiers kitty_mod

# #: The modifier keys to press when clicking with the mouse on URLs to
# #: open the URL

# # open_url_with default

# #: The program with which to open URLs that are clicked on. The
# #: special value default means to use the operating system's default
# #: URL handler.

# # copy_on_select no

# #: Copy to clipboard or a private buffer on select. With this set to
# #: clipboard, simply selecting text with the mouse will cause the text
# #: to be copied to clipboard. Useful on platforms such as macOS that
# #: do not have the concept of primary selections. You can instead
# #: specify a name such as a1 to copy to a private kitty buffer
# #: instead. Map a shortcut with the paste_from_buffer action to paste
# #: from this private buffer. For example::

# #:     map cmd+shift+v paste_from_buffer a1

# #: Note that copying to the clipboard is a security risk, as all
# #: programs, including websites open in your browser can read the
# #: contents of the system clipboard.

# # strip_trailing_spaces never

# #: Remove spaces at the end of lines when copying to clipboard. A
# #: value of smart will do it when using normal selections, but not
# #: rectangle selections. always will always do it.

# # rectangle_select_modifiers ctrl+alt

# #: The modifiers to use rectangular selection (i.e. to select text in
# #: a rectangular block with the mouse)

# # terminal_select_modifiers shift

# #: The modifiers to override mouse selection even when a terminal
# #: application has grabbed the mouse

# # select_by_word_characters :@-./_~?&=%+#

# #: Characters considered part of a word when double clicking. In
# #: addition to these characters any character that is marked as an
# #: alphanumeric character in the unicode database will be matched.

# # click_interval -1.0

# #: The interval between successive clicks to detect double/triple
# #: clicks (in seconds). Negative numbers will use the system default
# #: instead, if available, or fallback to 0.5.

# # focus_follows_mouse no

# #: Set the active window to the window under the mouse when moving the
# #: mouse around

# # pointer_shape_when_grabbed arrow

# #: The shape of the mouse pointer when the program running in the
# #: terminal grabs the mouse. Valid values are: arrow, beam and hand

# #: }}}

# #: Performance tuning {{{

# # repaint_delay 10

# #: Delay (in milliseconds) between screen updates. Decreasing it,
# #: increases frames-per-second (FPS) at the cost of more CPU usage.
# #: The default value yields ~100 FPS which is more than sufficient for
# #: most uses. Note that to actually achieve 100 FPS you have to either
# #: set sync_to_monitor to no or use a monitor with a high refresh
# #: rate. Also, to minimize latency when there is pending input to be
# #: processed, repaint_delay is ignored.

input_delay 3

# #: Delay (in milliseconds) before input from the program running in
# #: the terminal is processed. Note that decreasing it will increase
# #: responsiveness, but also increase CPU usage and might cause flicker
# #: in full screen programs that redraw the entire screen on each loop,
# #: because kitty is so fast that partial screen updates will be drawn.

sync_to_monitor yes

# #: Sync screen updates to the refresh rate of the monitor. This
# #: prevents tearing (https://en.wikipedia.org/wiki/Screen_tearing)
# #: when scrolling. However, it limits the rendering speed to the
# #: refresh rate of your monitor. With a very high speed mouse/high
# #: keyboard repeat rate, you may notice some slight input latency. If
# #: so, set this to no.

# #: }}}

# #: Terminal bell {{{

# # enable_audio_bell yes

# #: Enable/disable the audio bell. Useful in environments that require
# #: silence.

# # visual_bell_duration 0.0

# #: Visual bell duration. Flash the screen when a bell occurs for the
# #: specified number of seconds. Set to zero to disable.

# # window_alert_on_bell yes

# #: Request window attention on bell. Makes the dock icon bounce on
# #: macOS or the taskbar flash on linux.

# # bell_on_tab yes

# #: Show a bell symbol on the tab if a bell occurs in one of the
# #: windows in the tab and the window is not the currently focused
# #: window

# # command_on_bell none

# #: Program to run when a bell occurs.

# #: }}}

# #: Window layout {{{

# # remember_window_size  yes
# # initial_window_width  640
# # initial_window_height 400

# #: If enabled, the window size will be remembered so that new
# #: instances of kitty will have the same size as the previous
# #: instance. If disabled, the window will initially have size
# #: configured by initial_window_width/height, in pixels. You can use a
# #: suffix of "c" on the width/height values to have them interpreted
# #: as number of cells instead of pixels.

# # enabled_layouts *

# #: The enabled window layouts. A comma separated list of layout names.
# #: The special value all means all layouts. The first listed layout
# #: will be used as the startup layout. For a list of available
# #: layouts, see the
# #: https://sw.kovidgoyal.net/kitty/index.html#layouts.

# # window_resize_step_cells 2
# # window_resize_step_lines 2

# #: The step size (in units of cell width/cell height) to use when
# #: resizing windows. The cells value is used for horizontal resizing
# #: and the lines value for vertical resizing.

# # window_border_width 1.0

# #: The width (in pts) of window borders. Will be rounded to the
# #: nearest number of pixels based on screen resolution. Note that
# #: borders are displayed only when more than one window is visible.
# #: They are meant to separate multiple windows.

# # draw_minimal_borders yes

# #: Draw only the minimum borders needed. This means that only the
# #: minimum needed borders for inactive windows are drawn. That is only
# #: the borders that separate the inactive window from a neighbor. Note
# #: that setting a non-zero window margin overrides this and causes all
# #: borders to be drawn.

# # window_margin_width 0.0

# #: The window margin (in pts) (blank area outside the border)

# # single_window_margin_width -1000.0

# #: The window margin (in pts) to use when only a single window is
# #: visible. Negative values will cause the value of
# #: window_margin_width to be used instead.

# # window_padding_width 0.0

# #: The window padding (in pts) (blank area between the text and the
# #: window border)

# # placement_strategy center

# #: When the window size is not an exact multiple of the cell size, the
# #: cell area of the terminal window will have some extra padding on
# #: the sides. You can control how that padding is distributed with
# #: this option. Using a value of center means the cell area will be
# #: placed centrally. A value of top-left means the padding will be on
# #: only the bottom and right edges.

# # active_border_color #00ff00

# #: The color for the border of the active window. Set this to none to
# #: not draw borders around the active window.

# # inactive_border_color #cccccc

# #: The color for the border of inactive windows

# # bell_border_color #ff5a00

# #: The color for the border of inactive windows in which a bell has
# #: occurred

# # inactive_text_alpha 1.0

# #: Fade the text in inactive windows by the specified amount (a number
# #: between zero and one, with zero being fully faded).

# # hide_window_decorations no

# #: Hide the window decorations (title-bar and window borders). Whether
# #: this works and exactly what effect it has depends on the window
# #: manager/operating system.

# # resize_debounce_time 0.1

# #: The time (in seconds) to wait before redrawing the screen when a
# #: resize event is received. On platforms such as macOS, where the
# #: operating system sends events corresponding to the start and end of
# #: a resize, this number is ignored.

# # resize_draw_strategy static

# #: Choose how kitty draws a window while a resize is in progress. A
# #: value of static means draw the current window contents, mostly
# #: unchanged. A value of scale means draw the current window contents
# #: scaled. A value of blank means draw a blank window. A value of size
# #: means show the window size in cells.

# #: }}}

# #: Tab bar {{{

# # tab_bar_edge bottom

# #: Which edge to show the tab bar on, top or bottom

# # tab_bar_margin_width 0.0

# #: The margin to the left and right of the tab bar (in pts)

# # tab_bar_style fade

# #: The tab bar style, can be one of: fade, separator, powerline, or
# #: hidden. In the fade style, each tab's edges fade into the
# #: background color, in the separator style, tabs are separated by a
# #: configurable separator, and the powerline shows the tabs as a
# #: continuous line.

# # tab_bar_min_tabs 2

# #: The minimum number of tabs that must exist before the tab bar is
# #: shown

# # tab_switch_strategy previous

# #: The algorithm to use when switching to a tab when the current tab
# #: is closed. The default of previous will switch to the last used
# #: tab. A value of left will switch to the tab to the left of the
# #: closed tab. A value of last will switch to the right-most tab.

# # tab_fade 0.25 0.5 0.75 1

# #: Control how each tab fades into the background when using fade for
# #: the tab_bar_style. Each number is an alpha (between zero and one)
# #: that controls how much the corresponding cell fades into the
# #: background, with zero being no fade and one being full fade. You
# #: can change the number of cells used by adding/removing entries to
# #: this list.

# # tab_separator " ┇"

# #: The separator between tabs in the tab bar when using separator as
# #: the tab_bar_style.

# # tab_title_template {title}

# #: A template to render the tab title. The default just renders the
# #: title. If you wish to include the tab-index as well, use something
# #: like: {index}: {title}. Useful if you have shortcuts mapped for
# #: goto_tab N.

# # active_tab_title_template none

# #: Template to use for active tabs, if not specified falls back to
# #: tab_title_template.

# # active_tab_foreground   #000
# # active_tab_background   #eee
# # active_tab_font_style   bold-italic
# # inactive_tab_foreground #444
# # inactive_tab_background #999
# # inactive_tab_font_style normal

# #: Tab bar colors and styles

# # tab_bar_background none

# #: Background color for the tab bar. Defaults to using the terminal
# #: background color.

# #: }}}

# #: Color scheme {{{

# foreground #f0fdff
# background #2a2e38

# #: The foreground and background colors

# # background_opacity 1.0

# #: The opacity of the background. A number between 0 and 1, where 1 is
# #: opaque and 0 is fully transparent.  This will only work if
# #: supported by the OS (for instance, when using a compositor under
# #: X11). Note that it only sets the default background color's
# #: opacity. This is so that things like the status bar in vim,
# #: powerline prompts, etc. still look good.  But it means that if you
# #: use a color theme with a background color in your editor, it will
# #: not be rendered as transparent.  Instead you should change the
# #: default background color in your kitty config and not use a
# #: background color in the editor color scheme. Or use the escape
# #: codes to set the terminals default colors in a shell script to
# #: launch your editor.  Be aware that using a value less than 1.0 is a
# #: (possibly significant) performance hit.  If you want to dynamically
# #: change transparency of windows set dynamic_background_opacity to
# #: yes (this is off by default as it has a performance cost)

# # dynamic_background_opacity no

# #: Allow changing of the background_opacity dynamically, using either
# #: keyboard shortcuts (increase_background_opacity and
# #: decrease_background_opacity) or the remote control facility.

# # dim_opacity 0.75

# #: How much to dim text that has the DIM/FAINT attribute set. One
# #: means no dimming and zero means fully dimmed (i.e. invisible).

# # selection_foreground #000000

# #: The foreground for text selected with the mouse. A value of none
# #: means to leave the color unchanged.

# # selection_background #fffacd

# #: The background for text selected with the mouse.


# #: The 16 terminal colors. There are 8 basic colors, each color has a
# #: dull and bright version. You can also set the remaining colors from
# #: the 256 color table as color16 to color255.


# #: black
# color0 #2a2e38
# color8 #71798a

# #: red
# color1  #d08785
# color9 #ff3334

# #: green
# color2  #6f98b3
# color10 #9ec400

# #: yellow

# color3  #fdf8ce
# color11 #e7c547

# #: blue

# color4  #a6b8cc
# color12 #7aa6da

# #: magenta

# color5  #fcdbd9
# color13 #b77ee0

# #: cyan

# color6  #ffd17f
# color14 #54ced6

# #: white

# color7  #f0fdff
# color15 #ffffff

# #: }}}

# #: Advanced {{{

# # shell .

# #: The shell program to execute. The default value of . means to use
# #: whatever shell is set as the default shell for the current user.
# #: Note that on macOS if you change this, you might need to add
# #: --login to ensure that the shell starts in interactive mode and
# #: reads its startup rc files.

# # editor .

# #: The console editor to use when editing the kitty config file or
# #: similar tasks. A value of . means to use the environment variables
# #: VISUAL and EDITOR in that order. Note that this environment
# #: variable has to be set not just in your shell startup scripts but
# #: system-wide, otherwise kitty will not see it.

# # close_on_child_death no

# #: Close the window when the child process (shell) exits. If no (the
# #: default), the terminal will remain open when the child exits as
# #: long as there are still processes outputting to the terminal (for
# #: example disowned or backgrounded processes). If yes, the window
# #: will close as soon as the child process exits. Note that setting it
# #: to yes means that any background processes still using the terminal
# #: can fail silently because their stdout/stderr/stdin no longer work.

# # allow_remote_control no

# #: Allow other programs to control kitty. If you turn this on other
# #: programs can control all aspects of kitty, including sending text
# #: to kitty windows, opening new windows, closing windows, reading the
# #: content of windows, etc.  Note that this even works over ssh
# #: connections. You can chose to either allow any program running
# #: within kitty to control it, with yes or only programs that connect
# #: to the socket specified with the kitty --listen-on command line
# #: option, if you use the value socket-only. The latter is useful if
# #: you want to prevent programs running on a remote computer over ssh
# #: from controlling kitty.

# # env 

# #: Specify environment variables to set in all child processes. Note
# #: that environment variables are expanded recursively, so if you
# #: use::

# #:     env MYVAR1=a
# #:     env MYVAR2=${MYVAR1}/${HOME}/b

# #: The value of MYVAR2 will be a/<path to home directory>/b.

# # update_check_interval 24

# #: Periodically check if an update to kitty is available. If an update
# #: is found a system notification is displayed informing you of the
# #: available update. The default is to check every 24 hrs, set to zero
# #: to disable.

# # startup_session none

# #: Path to a session file to use for all kitty instances. Can be
# #: overridden by using the kitty --session command line option for
# #: individual instances. See
# #: https://sw.kovidgoyal.net/kitty/index.html#sessions in the kitty
# #: documentation for details. Note that relative paths are interpreted
# #: with respect to the kitty config directory. Environment variables
# #: in the path are expanded.

# # clipboard_control write-clipboard write-primary

# #: Allow programs running in kitty to read and write from the
# #: clipboard. You can control exactly which actions are allowed. The
# #: set of possible actions is: write-clipboard read-clipboard write-
# #: primary read-primary. You can additionally specify no-append to
# #: disable kitty's protocol extension for clipboard concatenation. The
# #: default is to allow writing to the clipboard and primary selection
# #: with concatenation enabled. Note that enabling the read
# #: functionality is a security risk as it means that any program, even
# #: one running on a remote server via SSH can read your clipboard.

# # term xterm-kitty

# #: The value of the TERM environment variable to set. Changing this
# #: can break many terminal programs, only change it if you know what
# #: you are doing, not because you read some advice on Stack Overflow
# #: to change it. The TERM variable is used by various programs to get
# #: information about the capabilities and behavior of the terminal. If
# #: you change it, depending on what programs you run, and how
# #: different the terminal you are changing it to is, various things
# #: from key-presses, to colors, to various advanced features may not
# #: work.

# #: }}}

# #: OS specific tweaks {{{

# # macos_titlebar_color system

# #: Change the color of the kitty window's titlebar on macOS. A value
# #: of system means to use the default system color, a value of
# #: background means to use the background color of the currently
# #: active window and finally you can use an arbitrary color, such as
# #: #12af59 or red. WARNING: This option works by using a hack, as
# #: there is no proper Cocoa API for it. It sets the background color
# #: of the entire window and makes the titlebar transparent. As such it
# #: is incompatible with background_opacity. If you want to use both,
# #: you are probably better off just hiding the titlebar with
# #: hide_window_decorations.

# # macos_option_as_alt no

# #: Use the option key as an alt key. With this set to no, kitty will
# #: use the macOS native Option+Key = unicode character behavior. This
# #: will break any Alt+key keyboard shortcuts in your terminal
# #: programs, but you can use the macOS unicode input technique. You
# #: can use the values: left, right, or both to use only the left,
# #: right or both Option keys as Alt, instead.

# # macos_hide_from_tasks no

# #: Hide the kitty window from running tasks (Option+Tab) on macOS.

# # macos_quit_when_last_window_closed no

# #: Have kitty quit when all the top-level windows are closed. By
# #: default, kitty will stay running, even with no open windows, as is
# #: the expected behavior on macOS.

# # macos_window_resizable yes

# #: Disable this if you want kitty top-level (OS) windows to not be
# #: resizable on macOS.

# macos_thicken_font 0.3

# #: Draw an extra border around the font with the given width, to
# #: increase legibility at small font sizes. For example, a value of
# #: 0.75 will result in rendering that looks similar to sub-pixel
# #: antialiasing at common font sizes.

# # macos_traditional_fullscreen no

# #: Use the traditional full-screen transition, that is faster, but
# #: less pretty.

# # macos_show_window_title_in all

# #: Show or hide the window title in the macOS window or menu-bar. A
# #: value of window will show the title of the currently active window
# #: at the top of the macOS window. A value of menubar will show the
# #: title of the currently active window in the macOS menu-bar, making
# #: use of otherwise wasted space. all will show the title everywhere
# #: and none hides the title in the window and the menu-bar.

# # macos_custom_beam_cursor no

# #: Enable/disable custom mouse cursor for macOS that is easier to see
# #: on both light and dark backgrounds. WARNING: this might make your
# #: mouse cursor invisible on dual GPU machines.

# # linux_display_server auto

# #: Choose between Wayland and X11 backends. By default, an appropriate
# #: backend based on the system state is chosen automatically. Set it
# #: to x11 or wayland to force the choice.

# #: }}}

# #: Keyboard shortcuts {{{

# #: For a list of key names, see: GLFW keys
# #: <https://www.glfw.org/docs/latest/group__keys.html>. The name to
# #: use is the part after the GLFW_KEY_ prefix. For a list of modifier
# #: names, see: GLFW mods
# #: <https://www.glfw.org/docs/latest/group__mods.html>

# #: On Linux you can also use XKB key names to bind keys that are not
# #: supported by GLFW. See XKB keys
# #: <https://github.com/xkbcommon/libxkbcommon/blob/master/xkbcommon/xkbcommon-
# #: keysyms.h> for a list of key names. The name to use is the part
# #: after the XKB_KEY_ prefix. Note that you should only use an XKB key
# #: name for keys that are not present in the list of GLFW keys.

# #: Finally, you can use raw system key codes to map keys. To see the
# #: system key code for a key, start kitty with the kitty --debug-
# #: keyboard option. Then kitty will output some debug text for every
# #: key event. In that text look for ``native_code`` the value of that
# #: becomes the key name in the shortcut. For example:

# #: .. code-block:: none

# #:     on_key_input: glfw key: 65 native_code: 0x61 action: PRESS mods: 0x0 text: 'a'

# #: Here, the key name for the A key is 0x61 and you can use it with::

# #:     map ctrl+0x61 something

# #: to map ctrl+a to something.

# #: You can use the special action no_op to unmap a keyboard shortcut
# #: that is assigned in the default configuration::

# #:     map kitty_mod+space no_op

# #: You can combine multiple actions to be triggered by a single
# #: shortcut, using the syntax below::

# #:     map key combine <separator> action1 <separator> action2 <separator> action3 ...

# #: For example::

# #:     map kitty_mod+e combine : new_window : next_layout

# #: this will create a new window and switch to the next available
# #: layout

# #: You can use multi-key shortcuts using the syntax shown below::

# #:     map key1>key2>key3 action

# #: For example::

# #:     map ctrl+f>2 set_font_size 20

# # kitty_mod ctrl+shift

# #: The value of kitty_mod is used as the modifier for all default
# #: shortcuts, you can change it in your kitty.conf to change the
# #: modifiers for all the default shortcuts.

# # clear_all_shortcuts no

# #: You can have kitty remove all shortcut definition seen up to this
# #: point. Useful, for instance, to remove the default shortcuts.

# # kitten_alias hints hints --hints-offset=0

# #: You can create aliases for kitten names, this allows overriding the
# #: defaults for kitten options and can also be used to shorten
# #: repeated mappings of the same kitten with a specific group of
# #: options. For example, the above alias changes the default value of
# #: kitty +kitten hints --hints-offset to zero for all mappings,
# #: including the builtin ones.

# #: Clipboard {{{

# # map kitty_mod+c copy_to_clipboard

# #: There is also a copy_or_interrupt action that can be optionally
# #: mapped to Ctrl+c. It will copy only if there is a selection and
# #: send an interrupt otherwise.

# # map cmd+c        copy_to_clipboard
# # map kitty_mod+v  paste_from_clipboard
# # map cmd+v        paste_from_clipboard
# # map kitty_mod+s  paste_from_selection
# # map shift+insert paste_from_selection
# # map kitty_mod+o  pass_selection_to_program

# #: You can also pass the contents of the current selection to any
# #: program using pass_selection_to_program. By default, the system's
# #: open program is used, but you can specify your own, the selection
# #: will be passed as a command line argument to the program, for
# #: example::

# #:     map kitty_mod+o pass_selection_to_program firefox

# #: You can pass the current selection to a terminal program running in
# #: a new kitty window, by using the @selection placeholder::

# #:     map kitty_mod+y new_window less @selection

# #: }}}

# #: Scrolling {{{

# # map kitty_mod+up        scroll_line_up
# # map alt+cmd+page_up     scroll_line_up
# # map cmd+up              scroll_line_up
# # map kitty_mod+k         scroll_line_up
# # map kitty_mod+down      scroll_line_down
# # map kitty_mod+j         scroll_line_down
# # map alt+cmd+page_down   scroll_line_down
# # map cmd+down            scroll_line_down
# # map kitty_mod+page_up   scroll_page_up
# # map cmd+page_up         scroll_page_up
# # map kitty_mod+page_down scroll_page_down
# # map cmd+page_down       scroll_page_down
# # map kitty_mod+home      scroll_home
# # map cmd+home            scroll_home
# # map kitty_mod+end       scroll_end
# # map cmd+end             scroll_end
# # map kitty_mod+h         show_scrollback

# #: You can pipe the contents of the current screen + history buffer as
# #: STDIN to an arbitrary program using the ``launch`` function. For
# #: example, the following opens the scrollback buffer in less in an
# #: overlay window::

# #:     map f1 launch --stdin-source=@screen_scrollback --stdin-add-formatting --type=overlay less +G -R

# #: For more details on piping screen and buffer contents to external
# #: programs, see launch.

# #: }}}

# #: Window management {{{

# # map kitty_mod+enter new_window

# #: You can open a new window running an arbitrary program, for
# #: example::

# #:     map kitty_mod+y      launch mutt

# #: You can open a new window with the current working directory set to
# #: the working directory of the current window using::

# #:     map ctrl+alt+enter    launch --cwd=current

# #: You can open a new window that is allowed to control kitty via the
# #: kitty remote control facility by prefixing the command line with @.
# #: Any programs running in that window will be allowed to control
# #: kitty. For example::

# #:     map ctrl+enter launch --allow-remote-control some_program

# #: You can open a new window next to the currently active window or as
# #: the first window, with::

# #:     map ctrl+n launch --location=neighbor some_program
# #:     map ctrl+f launch --location=first some_program

# #: For more details, see launch.

# # map cmd+enter   new_window
# # map kitty_mod+n new_os_window

# #: Works like new_window above, except that it opens a top level OS
# #: kitty window. In particular you can use new_os_window_with_cwd to
# #: open a window with the current working directory.

# # map cmd+n       new_os_window
# # map kitty_mod+w close_window
# # map shift+cmd+d close_window
# # map kitty_mod+] next_window
# # map kitty_mod+[ previous_window
# # map kitty_mod+f move_window_forward
# # map kitty_mod+b move_window_backward
# # map kitty_mod+` move_window_to_top
# # map kitty_mod+r start_resizing_window
# # map cmd+r       start_resizing_window
# # map kitty_mod+1 first_window
# # map cmd+1       first_window
# # map kitty_mod+2 second_window
# # map cmd+2       second_window
# # map kitty_mod+3 third_window
# # map cmd+3       third_window
# # map kitty_mod+4 fourth_window
# # map cmd+4       fourth_window
# # map kitty_mod+5 fifth_window
# # map cmd+5       fifth_window
# # map kitty_mod+6 sixth_window
# # map cmd+6       sixth_window
# # map kitty_mod+7 seventh_window
# # map cmd+7       seventh_window
# # map kitty_mod+8 eighth_window
# # map cmd+8       eighth_window
# # map kitty_mod+9 ninth_window
# # map cmd+9       ninth_window
# # map kitty_mod+0 tenth_window
# #: }}}

# #: Tab management {{{

# # map kitty_mod+right next_tab
# # map ctrl+tab        next_tab
# # map shift+cmd+]     next_tab
# # map kitty_mod+left  previous_tab
# # map shift+ctrl+tab  previous_tab
# # map shift+cmd+[     previous_tab
# # map kitty_mod+t     new_tab
# # map cmd+t           new_tab
# # map kitty_mod+q     close_tab
# # map cmd+w           close_tab
# # map kitty_mod+.     move_tab_forward
# # map kitty_mod+,     move_tab_backward
# # map kitty_mod+alt+t set_tab_title
# # map shift+cmd+i     set_tab_title

# #: You can also create shortcuts to go to specific tabs, with 1 being
# #: the first tab, 2 the second tab and -1 being the previously active
# #: tab::

# #:     map ctrl+alt+1 goto_tab 1
# #:     map ctrl+alt+2 goto_tab 2

# #: Just as with new_window above, you can also pass the name of
# #: arbitrary commands to run when using new_tab and use
# #: new_tab_with_cwd. Finally, if you want the new tab to open next to
# #: the current tab rather than at the end of the tabs list, use::

# #:     map ctrl+t new_tab !neighbor [optional cmd to run]
# #: }}}

# #: Layout management {{{

# # map kitty_mod+l next_layout

# #: You can also create shortcuts to switch to specific layouts::

# #:     map ctrl+alt+t goto_layout tall
# #:     map ctrl+alt+s goto_layout stack

# #: Similarly, to switch back to the previous layout::

# #:    map ctrl+alt+p last_used_layout
# #: }}}

# #: Font sizes {{{

# #: You can change the font size for all top-level kitty OS windows at
# #: a time or only the current one.

# # map kitty_mod+equal     change_font_size all +2.0
# # map cmd+plus            change_font_size all +2.0
# # map kitty_mod+minus     change_font_size all -2.0
# # map cmd+minus           change_font_size all -2.0
# # map kitty_mod+backspace change_font_size all 0
# # map cmd+0               change_font_size all 0

# #: To setup shortcuts for specific font sizes::

# #:     map kitty_mod+f6 change_font_size all 10.0

# #: To setup shortcuts to change only the current OS window's font
# #: size::

# #:     map kitty_mod+f6 change_font_size current 10.0
# #: }}}

# #: Select and act on visible text {{{

# #: Use the hints kitten to select text and either pass it to an
# #: external program or insert it into the terminal or copy it to the
# #: clipboard.

# # map kitty_mod+e kitten hints

# #: Open a currently visible URL using the keyboard. The program used
# #: to open the URL is specified in open_url_with.

# # map kitty_mod+p>f kitten hints --type path --program -

# #: Select a path/filename and insert it into the terminal. Useful, for
# #: instance to run git commands on a filename output from a previous
# #: git command.

# # map kitty_mod+p>shift+f kitten hints --type path

# #: Select a path/filename and open it with the default open program.

# # map kitty_mod+p>l kitten hints --type line --program -

# #: Select a line of text and insert it into the terminal. Use for the
# #: output of things like: ls -1

# # map kitty_mod+p>w kitten hints --type word --program -

# #: Select words and insert into terminal.

# # map kitty_mod+p>h kitten hints --type hash --program -

# #: Select something that looks like a hash and insert it into the
# #: terminal. Useful with git, which uses sha1 hashes to identify
# #: commits


# #: The hints kitten has many more modes of operation that you can map
# #: to different shortcuts. For a full description see kittens/hints.
# #: }}}

# #: Miscellaneous {{{

# # map kitty_mod+f11    toggle_fullscreen
# # map kitty_mod+f10    toggle_maximized
# # map kitty_mod+u      kitten unicode_input
# # map kitty_mod+f2     edit_config_file
# # map kitty_mod+escape kitty_shell window

# #: Open the kitty shell in a new window/tab/overlay/os_window to
# #: control kitty using commands.

# # map kitty_mod+a>m    set_background_opacity +0.1
# # map kitty_mod+a>l    set_background_opacity -0.1
# # map kitty_mod+a>1    set_background_opacity 1
# # map kitty_mod+a>d    set_background_opacity default
# # map kitty_mod+delete clear_terminal reset active

# #: You can create shortcuts to clear/reset the terminal. For example::

# #:     # Reset the terminal
# #:     map kitty_mod+f9 clear_terminal reset active
# #:     # Clear the terminal screen by erasing all contents
# #:     map kitty_mod+f10 clear_terminal clear active
# #:     # Clear the terminal scrollback by erasing it
# #:     map kitty_mod+f11 clear_terminal scrollback active
# #:     # Scroll the contents of the screen into the scrollback
# #:     map kitty_mod+f12 clear_terminal scroll active

# #: If you want to operate on all windows instead of just the current
# #: one, use all instead of active.

# #: It is also possible to remap Ctrl+L to both scroll the current
# #: screen contents into the scrollback buffer and clear the screen,
# #: instead of just clearing the screen::

# #:     map ctrl+l combine : clear_terminal scroll active : send_text normal,application \x0c


# #: You can tell kitty to send arbitrary (UTF-8) encoded text to the
# #: client program when pressing specified shortcut keys. For example::

# #:     map ctrl+alt+a send_text all Special text

# #: This will send "Special text" when you press the ctrl+alt+a key
# #: combination.  The text to be sent is a python string literal so you
# #: can use escapes like \x1b to send control codes or \u21fb to send
# #: unicode characters (or you can just input the unicode characters
# #: directly as UTF-8 text). The first argument to send_text is the
# #: keyboard modes in which to activate the shortcut. The possible
# #: values are normal or application or kitty or a comma separated
# #: combination of them.  The special keyword all means all modes. The
# #: modes normal and application refer to the DECCKM cursor key mode
# #: for terminals, and kitty refers to the special kitty extended
# #: keyboard protocol.

# #: Another example, that outputs a word and then moves the cursor to
# #: the start of the line (same as pressing the Home key)::

# #:     map ctrl+alt+a send_text normal Word\x1b[H
# #:     map ctrl+alt+a send_text application Word\x1bOH

# #: }}}

# # }}}


# map Control + Tab to previous tab
# map ctrl+shift+left ctrl+tab

# reload kitty config file
# ctrl+shift+f5