"OPT: Code"," Build-Option Description","State"
"V","Variable spindle","Enabled"
"N","Line numbers","Enabled"
"M","Mist coolant M7","Enabled"
"C","CoreXY","Enabled"
"P","Parking motion","Enabled"
"Z","Homing force origin","Enabled"
"H","Homing single axis commands","Enabled"
"T","Two limit switches on axis","Enabled"
"A","Allow feed rate overrides in probe cycles","Enabled"
"D","Use spindle direction as enable pin","Enabled"
"0","Spindle enable off when speed is zero","Enabled"
"S","Software limit pin debouncing","Enabled"
"R","Parking override control","Enabled"
"+","Safety door input pin","Enabled"
"*","Restore all EEPROM command","Disabled"
"$","Restore EEPROM `$` settings command","Disabled"
"#","Restore EEPROM parameter data command","Disabled"
"I","Build info write user string command","Disabled"
"E","Force sync upon EEPROM write","Disabled"
"W","Force sync upon work coordinate offset change","Disabled"
"L","Homing initialization auto-lock","Disabled"