Connecting... start Printer is now online. echo:Marlin 1.1.9 echo: Last Updated: 2018-08-01 | Author: (none, default config) echo:Compiled: Dec 8 2019 echo: Free Memory: 3206 PlannerBufferBytes: 1232 echo:V55 stored settings retrieved (655 bytes; crc 42236) Unified Bed Leveling System v1.01 active. Unified Bed Leveling initialized. Mesh loaded from slot 0 Mesh 0 loaded from storage. echo: G21 ; (mm) echo: M149 C ; Units in Celsius echo:Filament settings: Disabled echo: M200 D1.75 echo: M200 D0 echo:Steps per unit: echo: M92 X80.00 Y80.00 Z4000.00 E100.47 echo:Maximum feedrates (units/s): echo: M203 X69.00 Y72.00 Z3.30 E25.00 echo:Maximum Acceleration (units/s2): echo: M201 X1100 Y1100 Z100 E10000 echo:Acceleration (units/s2): P R T echo: M204 P1500.00 R1000.00 T1500.00 echo:Advanced: Q S T X Y Z E echo: M205 Q20000 S0.00 T0.00 X10.00 Y10.00 Z0.30 E5.00 echo:Home offset: echo: M206 X0.00 Y0.00 Z0.00 echo:Unified Bed Leveling: echo: M420 S1 Z10.00 Unified Bed Leveling System v1.01 active. Active Mesh Slot: 0 EEPROM can hold 7 meshes. echo:Material heatup parameters: echo: M145 S0 H180 B70 F0 echo: M145 S1 H240 B84 F0 echo:PID settings: echo: M301 P22.20 I1.08 D114.00 echo:Z-Probe Offset (mm): echo: M851 Z-2.20 SENDING:M81 ; SWITCHING ON POWER SUPPLY Setting bed temperature to 30.000000 degrees Celsius. SENDING:M105 ; TEMP REPORT ok T:19.57 /0.00 B:20.62 /30.00 @:0 B@:127 SENDING:M105 ; TEMP REPORT ok T:19.57 /0.00 B:20.82 /30.00 @:0 B@:127 SENDING:M105 ; TEMP REPORT ok T:19.61 /0.00 B:21.25 /30.00 @:0 B@:127 SENDING:M105 ; TEMP REPORT ok T:19.61 /0.00 B:21.29 /30.00 @:0 B@:127 SENDING:M105 ; TEMP REPORT ok T:19.73 /0.00 B:21.45 /30.00 @:0 B@:127 SENDING:M105 ; TEMP REPORT ok T:19.57 /0.00 B:21.80 /30.00 @:0 B@:127 Loading file: F:\_Technique\_Dev_n_Prog\__SHARE__\Share\low_temp_test.gcode Setting bed temperature to 30.000000 degrees Celsius. Setting hotend temperature to 245.000000 degrees Celsius. Loaded F:\_Technique\_Dev_n_Prog\__SHARE__\Share\low_temp_test.gcode, 72491 lines 2141.32mm of filament used in this print The print goes: - from 63.87 mm to 136.12 mm in X and is 72.24 mm wide - from 82.86 mm to 117.14 mm in Y and is 34.29 mm deep - from 0.00 mm to 22.89 mm in Z and is 22.89 mm high Estimated duration: 231 layers, 0:45:47 SENDING:M105 ; TEMP REPORT ok T:83.04 /245.00 B:30.08 /30.00 @:127 B@:0 Print started at: 09:55:24 echo:busy: processing SENDING:M105 ; TEMP REPORT T:104.29 /245.00 B:29.94 /30.00 @:127 B@:0 W:1 echo:busy: processing Unified Bed Leveling System v1.01 active. echo:busy: processing SENDING:M105 ; TEMP REPORT echo:busy: processing echo:busy: processing echo:busy: processing echo:busy: processing SENDING:M105 ; TEMP REPORT echo:busy: processing echo:busy: processing echo:busy: processing echo:busy: processing echo:busy: processing SENDING:M105 ; TEMP REPORT echo:busy: processing echo:busy: processing echo:busy: processing ok T:109.18 /0.00 B:29.40 /0.00 @:0 B@:0 ok T:109.18 /0.00 B:29.40 /0.00 @:0 B@:0 ok T:109.18 /0.00 B:29.40 /0.00 @:0 B@:0 SENDING:M105 ; TEMP REPORT echo:busy: processing T:108.29 /245.00 B:29.26 /0.00 @:127 B@:0 W:? echo:busy: processing SENDING:M105 ; TEMP REPORT T:107.68 /245.00 B:29.32 /0.00 @:127 B@:0 W:? SENDING:M105 ; TEMP REPORT echo:busy: processing T:107.80 /245.00 B:29.20 /0.00 @:127 B@:0 W:? echo:busy: processing echo:busy: processing echo:busy: processing echo:busy: processing echo:busy: processing echo:busy: processing Setting bed temperature to 30.000000 degrees Celsius. echo:busy: processing SENDING:M105 ; TEMP REPORT echo:busy: processing T:122.60 /245.00 B:28.98 /0.00 @:127 B@:0 W:? echo:busy: processing Setting bed temperature to 30.000000 degrees Celsius. echo:busy: processing echo:busy: processing Setting bed temperature to 30.000000 degrees Celsius. echo:busy: processing echo:busy: processing SENDING:M105 ; TEMP REPORT echo:busy: processing T:137.09 /245.00 B:28.66 /0.00 @:127 B@:0 W:? echo:busy: processing echo:busy: processing echo:busy: processing echo:busy: processing echo:busy: processing echo:busy: processing echo:busy: processing echo:busy: processing echo:busy: processing echo:busy: processing echo:busy: processing echo:busy: processing echo:busy: processing echo:busy: processing echo:busy: processing echo:busy: processing Disconnected.