#! /bin/sh

. /lib/partman/lib/base.sh
. /lib/partman/lib/resize.sh
. /lib/partman/lib/recipes.sh

# busybox wants mount -o move; util-linux wants mount --move. Sigh.
if [ -d /lib/debian-installer ]; then
        mount_private='-o private'
	mount_move='-o move'
else
	mount_move='--move'
        mount_private='--make-private'
fi

mount $mount_private /

modprobe loop >/dev/null 2>&1 || true

# Set up working directory.

if type mktemp >/dev/null 2>&1; then
	recipe_dir="$(mktemp -d /tmp/partman-auto-loop.XXXXXX)"
	trap "rm -rf $recipe_dir" EXIT HUP INT QUIT TERM
else
	recipe_dir=/tmp
fi

# Fetch parameters.

disk="$1"

cd $disk

if ! db_get partman-auto-loop/partition || [ -z "$RET" ]; then
	logger -t partman-auto-loop "Error: No partition number specified in partman-auto-loop/partition"
	exit 1
fi
partition="$RET"

if ! db_get partman-auto-loop/recipe || [ -z "$RET" ]; then
	logger -t partman-auto-loop "Error: No recipe specified in partman-auto-loop/recipe"
	exit 1
fi
recipe="$RET"
echo "$recipe" >"$recipe_dir/loop_recipe"

# Find the requested partition.

db_progress START 0 5 partman-auto/text/automatically_partition
db_progress INFO partman-auto/progress/info

partition_id=
partition_fs=
open_dialog PARTITIONS
while { read_line num id size type fs path name; [ "$id" ]; }; do
	if [ "$num" = "$partition" ]; then
		partition_id="$id"
		partition_fs="$fs"
		# go ahead and read all remaining input
	fi
done
close_dialog
if [ -z "$partition_id" ]; then
	logger -t partman-auto-loop "Error: Partition number $partition not found in $disk"
	exit 1
fi

# Set up the requested partition in partman.

existing=no
for j in $(
	for i in /lib/partman/valid_filesystems/*; do
		[ -x $i ] || continue
		$i $disk $partition_id existing
	done
); do
	if [ "$j" = "$partition_fs" ]; then
		existing=yes
	fi
done

if [ "$existing" = no ]; then
	logger -t partman-auto-loop "Error: No filesystem on $disk/$partition_id"
	exit 1
fi

echo keep >$partition_id/method
rm -f $partition_id/format
>$partition_id/use_filesystem
echo $partition_fs >$partition_id/filesystem
mkdir -p $partition_id/options
echo / >$partition_id/mountpoint
update_partition $disk $partition_id

# Is there enough space to perform the recipe?

dev="$disk"
oldid="$partition_id"

recipe_new=
firstword=
imagepaths=
for word in $(cat "$recipe_dir/loop_recipe"); do
	case $word in
		.)
			recipe_new="${recipe_new:+$recipe_new }\$imagepath{ $firstword } $word"
			firstword=
			;;
		*)
			if [ "$firstword" ]; then
				recipe_new="${recipe_new:+$recipe_new }$word"
			else
				firstword="$word"
				imagepaths="${imagepaths:+$imagepaths }$word"
			fi
			;;
	esac
done
echo "$recipe_new" >"$recipe_dir/loop_recipe_new"
decode_recipe "$recipe_dir/loop_recipe_new" loop

db_progress STEP 1

fstab="$(
	for i in /lib/partman/fstab.d/*; do
		[ -x "$i" ] || continue
		$i
	done |
	while read fs mp type options dump pass; do
		case $mp in
			(/)
				echo $fs $mp $type $options $dump $pass
				;;
		esac
	done
)"

if [ -z "$fstab" ]; then
	logger -t partman-auto-loop "Error: No fstab output for $disk/$partition_id"
	exit 1
fi

mkdir -p /target

mountpoint="$(grep "^${fstab%% *} [^ ]* [^ ]* [^ ]*rw" /proc/mounts | cut -d ' ' -f2 | head -n1)" || mountpoint=
if [ "$mountpoint" = /target ]; then
	# nothing to do
	:
elif [ "$mountpoint" ]; then
	if ! mount $mount_move "$mountpoint" /target; then
		logger -t partman-auto-loop "Error: Failed to move $mountpoint to /target"
		exit 1
	fi
	unmount_cmd='umount /target'
else
	for m in /lib/partman/mount.d/*; do
		[ -x "$m" ] || continue

		unmount_cmd="$($m "$fstab")"
		if [ "$?" = 0 ]; then
			break
		fi
	done
fi
if [ -d /run ]; then
	mkdir -p /run/sendsigs.omit.d
	pidof mount.ntfs >> /run/sendsigs.omit.d/ntfs-3g
	pidof mount.ntfs-3g >> /run/sendsigs.omit.d/ntfs-3g
fi

# TODO: handle errors if no mount succeeded
mkdir -p /host
mount $mount_move /target /host # TODO error handling

# Don't try to mount this again later.
rm -f $partition_id/mountpoint

# Ensure there is enough free space.
check_free_space=false
requires_disk_space(){
    [ "$1" != 0 ] || return
    path="$(echo "$*" | sed 's/.*\$imagepath{  *\([^ }]*\) *}.*/\1/')"
    [ "$path" != "$*" ] || return
    case $path in
		/*)	;;
		*)	path="/$path" ;;
    esac
    [ -f "/host$path" ] && return 
    check_free_space=true
}
foreach_partition 'requires_disk_space $*' 

# Skip resize_range check if images are already created.
if [ $check_free_space = true ]; then
    case $partition_fs in
	linux-swap|fat16|fat32|hfs|hfs+|hfsx)
		get_resize_range
		;;
	ext2|ext3|ext4)
		if ! search-path tune2fs; then
			logger -t partman-auto-loop "Error: tune2fs not found"
			exit 1
		fi
		if ! search-path resize2fs; then
			logger -t partman-auto-loop "Error: resize2fs not found"
			exit 1
		fi
		if ! get_ext2_resize_range; then
			logger -t partman-auto-loop "Error: Failed to get ext2 resize range for $disk/$partition_id"
			exit 1
		fi
		;;
	ntfs)
		if ! search-path ntfsresize; then
			logger -t partman-auto-loop "Error: ntfsresize not found"
			exit 1
		fi
		if ! get_ntfs_resize_range; then
			db_input critical partman-auto-loop/unclean_ntfs || true
			db_go || true
			logger -t partman-auto-loop "Error: Failed to get NTFS resize range for $disk/$partition_id"
			reboot
			exit 1
		fi
		;;
	*)
		logger -t partman-auto-loop "Cannot calculate free space on filesystems of type $partition_fs"
		exit 1
		;;
    esac
    free_size="$(expr \( "$cursize" - "$minsize" \) \* 9 / 10)"
    # convert to megabytes
    free_size="$(expr 0000000"$free_size" : '0*\(..*\)......$')"
    if [ $(min_size) -gt $free_size ]; then
        logger -t partman-auto-loop "Error: partman-auto-loop/recipe too large ($(min_size) > $free_size)"
        exit 1
    fi
fi

# Ensure that no old loop images are present and mountable.
found_images=
mkdir -p /tmpmountpoint
for path in $imagepaths; do
	case $path in
		/*)	;;
		*)	path="/$path" ;;
	esac
	if [ -e "/host$path" ]; then
		if mount -t auto -o loop,ro /host$path /tmpmountpoint 2>/dev/null 3>&-; then
			found_images="${found_images:+$found_images }$path"
			umount /tmpmountpoint || true
			rmdir /tmpmountpoint || true
		fi
	fi
done
if [ "$found_images" ]; then
	db_progress STOP
	db_subst partman-auto-loop/unclean_host PARTITION "$partition"
	db_subst partman-auto-loop/unclean_host DISK "$disk"
	db_subst partman-auto-loop/unclean_host IMAGES "$found_images"
	db_input critical partman-auto-loop/unclean_host || true
	db_capb
	db_go || true
	db_capb backup
	umount /host || true
	exit 1
fi

db_progress STEP 1

expand_scheme

db_progress STEP 1

clean_method

db_progress STEP 1

setup_loop () {
	[ "$1" != 0 ] || return
	path="$(echo "$*" | sed 's/.*\$imagepath{  *\([^ }]*\) *}.*/\1/')"
	[ "$path" != "$*" ] || return

	case $path in
		/*)	;;
		*)	path="/$path" ;;
	esac
	if [ ! -f "/host$path" ]; then
		mkdir -p "/host${path%/*}"
		if [ "$4" = "linux-swap" ]; then
			# swap requires a file with no holes
			dd if=/dev/zero of="/host$path" bs="1000000" count="$1"
		else
			dd if=/dev/zero of="/host$path" bs="1000000" seek="$1" count=0
		fi
	fi
	if ! losetup -f "/host$path"; then
		shift
		continue
	fi
	if [ "$4" = linux-swap ]; then
		loops="/host$path"
	else
		loops="$(echo /dev/loop* /dev/loop/*)"
	fi
	for loop in $loops; do
		[ -e "$loop" ] || continue
		case $loop in
			/dev/loop*)
				loopfile="$(losetup "$loop")" || continue
				# The following works with both busybox's
				# losetup and util-linux's losetup. Yes,
				# this is ugly.
				loopfile="$(echo "$loopfile" | sed 's,.*\(/host/[^)]*\).*,\1,')"
				;;
			*)
				loopfile="$loop"
				;;
		esac
		[ "$loopfile" = "/host$path" ] || continue

		dirname="$(echo "$loop" | sed 's:/:=:g')"
		dev="$DEVICES/$dirname"

		rm -rf "$dev"
		mkdir "$dev" || autopartitioning_failed
		printf "%s" "$loop" >"$dev/device"
		printf "%s" "$1" >"$dev/size"
		echo "Loopback on $loopfile" >"$dev/model"
		echo "$loopfile" >"$dev/loop"

		cd "$dev"
		open_dialog OPEN "$(cat "$dev/device")"
		read_line response
		close_dialog
		if [ "$response" = failed ]; then
			cd /
			rm -rf "$dev"
			autopartitioning_failed
		fi

		open_dialog NEW_LABEL loop
		close_dialog

		# find the free space
		open_dialog PARTITIONS
		free_space=
		while { read_line num id size type fs path name; [ "$id" ]; }; do
			case $fs in
				free|unknown)
					free_space=$id
					free_size=$size
					free_fs=$fs
					;;
			esac
		done
		close_dialog

		# create partition in the free space
		[ "$free_space" ] || autopartitioning_failed
		if [ "$free_fs" = unknown ]; then
			# parted >= 3.2 gives us a partition automatically
			id=$free_space
		else
			# With parted < 3.2 we must create a partition manually
			open_dialog NEW_PARTITION primary $4 $free_space full ${1}000001
			read_line num id size type fs path name
			close_dialog
		fi

		shift; shift; shift; shift
		setup_partition $id $*
		break
	done
}

foreach_partition 'setup_loop $*'

db_progress STEP 1

update_all

apt-install lupin-support

db_progress STOP

exit 0