> [!CAUTION] > Multiprotocol is no longer supported and will be removed in the near future! > [Disable multiprotocol support](https://connectzbt1.home-assistant.io/procedures/disable-multiprotocol/) by migrating your radio back to Zigbee or Thread firmware. # \[DEPRECATED\] Home Assistant App: SiliconLabs Zigbee/OpenThread Multiprotocol App Zigbee/OpenThread Multiprotocol container for Silicon Labs based radios such as Home Assistant Yellow, Home Assistant SkyConnect, and Home Assistant Connect ZBT-1. ![Supports aarch64 Architecture][aarch64-shield] ![Supports amd64 Architecture][amd64-shield] ## About This app (formerly known as add-on) allows you to use Zigbee and OpenThread protocol simultaneous on a single Silicon Labs based radio. The radio needs the RCP Multi-PAN firmware installed to support multiple IEEE 802.15.4 Personal Area Networks (PAN). The addon has been tested with EFR32 Series 2 based radios. [aarch64-shield]: https://img.shields.io/badge/aarch64-yes-green.svg [amd64-shield]: https://img.shields.io/badge/amd64-yes-green.svg